/// <summary>
/// Checks two shapes for collisions.
/// </summary>
/// <param name="support1">The SupportMappable implementation of the first shape to test.</param>
/// <param name="support2">The SupportMappable implementation of the seconds shape to test.</param>
/// <param name="orientation1">The orientation of the first shape.</param>
/// <param name="orientation2">The orientation of the second shape.</param>
/// <param name="position1">The position of the first shape.</param>
/// <param name="position2">The position of the second shape</param>
/// <param name="point">The pointin world coordinates, where collision occur.</param>
/// <param name="normal">The normal pointing from body2 to body1.</param>
/// <param name="penetration">Estimated penetration depth of the collision.</param>
/// <returns>Returns true if there is a collision, false otherwise.</returns>
public static bool Detect(ISupportMappable support1, ISupportMappable support2, ref JMatrix orientation1,
ref JMatrix orientation2, ref JVector position1, ref JVector position2,
out JVector point, out JVector normal, out float penetration)
{
// Used variables
JVector temp1, temp2;
JVector v01, v02, v0;
JVector v11, v12, v1;
JVector v21, v22, v2;
JVector v31, v32, v3;
JVector v41, v42, v4;
JVector mn;
// Initialization of the output
point = normal = JVector.Zero;
penetration = 0.0f;
//JVector right = JVector.Right;
// Get the center of shape1 in world coordinates -> v01
support1.SupportCenter(out v01);
JVector.Transform(ref v01, ref orientation1, out v01);
JVector.Add(ref position1, ref v01, out v01);
// Get the center of shape2 in world coordinates -> v02
support2.SupportCenter(out v02);
JVector.Transform(ref v02, ref orientation2, out v02);
JVector.Add(ref position2, ref v02, out v02);
// v0 is the center of the minkowski difference
JVector.Subtract(ref v02, ref v01, out v0);
// Avoid case where centers overlap -- any direction is fine in this case
if (v0.IsNearlyZero())
{
v0 = new JVector(0.00001f, 0, 0);
}
// v1 = support in direction of origin
mn = v0;
JVector.Negate(ref v0, out normal);
SupportMapTransformed(support1, ref orientation1, ref position1, ref mn, out v11);
SupportMapTransformed(support2, ref orientation2, ref position2, ref normal, out v12);
JVector.Subtract(ref v12, ref v11, out v1);
if (JVector.Dot(ref v1, ref normal) <= 0.0f)
{
return(false);
}
// v2 = support perpendicular to v1,v0
JVector.Cross(ref v1, ref v0, out normal);
if (normal.IsNearlyZero())
{
JVector.Subtract(ref v1, ref v0, out normal);
normal.Normalize();
point = v11;
JVector.Add(ref point, ref v12, out point);
JVector.Multiply(ref point, 0.5f, out point);
JVector.Subtract(ref v12, ref v11, out temp1);
penetration = JVector.Dot(ref temp1, ref normal);
//point = v11;
//point2 = v12;
return(true);
}
JVector.Negate(ref normal, out mn);
SupportMapTransformed(support1, ref orientation1, ref position1, ref mn, out v21);
SupportMapTransformed(support2, ref orientation2, ref position2, ref normal, out v22);
JVector.Subtract(ref v22, ref v21, out v2);
if (JVector.Dot(ref v2, ref normal) <= 0.0f)
{
return(false);
}
// Determine whether origin is on + or - side of plane (v1,v0,v2)
JVector.Subtract(ref v1, ref v0, out temp1);
JVector.Subtract(ref v2, ref v0, out temp2);
JVector.Cross(ref temp1, ref temp2, out normal);
float dist = JVector.Dot(ref normal, ref v0);
// If the origin is on the - side of the plane, reverse the direction of the plane
if (dist > 0.0f)
{
JVector.Swap(ref v1, ref v2);
JVector.Swap(ref v11, ref v21);
JVector.Swap(ref v12, ref v22);
JVector.Negate(ref normal, out normal);
}
int phase2 = 0;
int phase1 = 0;
bool hit = false;
// Phase One: Identify a portal
while (true)
{
if (phase1 > MaximumIterations)
{
return(false);
}
phase1++;
// Obtain the support point in a direction perpendicular to the existing plane
// Note: This point is guaranteed to lie off the plane
JVector.Negate(ref normal, out mn);
SupportMapTransformed(support1, ref orientation1, ref position1, ref mn, out v31);
SupportMapTransformed(support2, ref orientation2, ref position2, ref normal, out v32);
JVector.Subtract(ref v32, ref v31, out v3);
if (JVector.Dot(ref v3, ref normal) <= 0.0f)
{
return(false);
}
// If origin is outside (v1,v0,v3), then eliminate v2 and loop
JVector.Cross(ref v1, ref v3, out temp1);
if (JVector.Dot(ref temp1, ref v0) < 0.0f)
{
v2 = v3;
v21 = v31;
v22 = v32;
JVector.Subtract(ref v1, ref v0, out temp1);
JVector.Subtract(ref v3, ref v0, out temp2);
JVector.Cross(ref temp1, ref temp2, out normal);
continue;
}
// If origin is outside (v3,v0,v2), then eliminate v1 and loop
JVector.Cross(ref v3, ref v2, out temp1);
if (JVector.Dot(ref temp1, ref v0) < 0.0f)
{
v1 = v3;
v11 = v31;
v12 = v32;
JVector.Subtract(ref v3, ref v0, out temp1);
JVector.Subtract(ref v2, ref v0, out temp2);
JVector.Cross(ref temp1, ref temp2, out normal);
continue;
}
// Phase Two: Refine the portal
// We are now inside of a wedge...
while (true)
{
phase2++;
// Compute normal of the wedge face
JVector.Subtract(ref v2, ref v1, out temp1);
JVector.Subtract(ref v3, ref v1, out temp2);
JVector.Cross(ref temp1, ref temp2, out normal);
// Can this happen??? Can it be handled more cleanly?
if (normal.IsNearlyZero())
{
return(true);
}
normal.Normalize();
// Compute distance from origin to wedge face
float d = JVector.Dot(ref normal, ref v1);
// If the origin is inside the wedge, we have a hit
if (d >= 0 && !hit)
{
// HIT!!!
hit = true;
}
// Find the support point in the direction of the wedge face
JVector.Negate(ref normal, out mn);
SupportMapTransformed(support1, ref orientation1, ref position1, ref mn, out v41);
SupportMapTransformed(support2, ref orientation2, ref position2, ref normal, out v42);
JVector.Subtract(ref v42, ref v41, out v4);
JVector.Subtract(ref v4, ref v3, out temp1);
float delta = JVector.Dot(ref temp1, ref normal);
penetration = JVector.Dot(ref v4, ref normal);
// If the boundary is thin enough or the origin is outside the support plane for the newly discovered vertex, then we can terminate
if (delta <= CollideEpsilon || penetration <= 0.0f || phase2 > MaximumIterations)
{
if (hit)
{
JVector.Cross(ref v1, ref v2, out temp1);
float b0 = JVector.Dot(ref temp1, ref v3);
JVector.Cross(ref v3, ref v2, out temp1);
float b1 = JVector.Dot(ref temp1, ref v0);
JVector.Cross(ref v0, ref v1, out temp1);
float b2 = JVector.Dot(ref temp1, ref v3);
JVector.Cross(ref v2, ref v1, out temp1);
float b3 = JVector.Dot(ref temp1, ref v0);
float sum = b0 + b1 + b2 + b3;
if (sum <= 0)
{
b0 = 0;
JVector.Cross(ref v2, ref v3, out temp1);
b1 = JVector.Dot(ref temp1, ref normal);
JVector.Cross(ref v3, ref v1, out temp1);
b2 = JVector.Dot(ref temp1, ref normal);
JVector.Cross(ref v1, ref v2, out temp1);
b3 = JVector.Dot(ref temp1, ref normal);
sum = b1 + b2 + b3;
}
float inv = 1.0f / sum;
JVector.Multiply(ref v01, b0, out point);
JVector.Multiply(ref v11, b1, out temp1);
JVector.Add(ref point, ref temp1, out point);
JVector.Multiply(ref v21, b2, out temp1);
JVector.Add(ref point, ref temp1, out point);
JVector.Multiply(ref v31, b3, out temp1);
JVector.Add(ref point, ref temp1, out point);
JVector.Multiply(ref v02, b0, out temp2);
JVector.Add(ref temp2, ref point, out point);
JVector.Multiply(ref v12, b1, out temp1);
JVector.Add(ref point, ref temp1, out point);
JVector.Multiply(ref v22, b2, out temp1);
JVector.Add(ref point, ref temp1, out point);
JVector.Multiply(ref v32, b3, out temp1);
JVector.Add(ref point, ref temp1, out point);
JVector.Multiply(ref point, inv * 0.5f, out point);
}
// Compute the barycentric coordinates of the origin
return(hit);
}
////// Compute the tetrahedron dividing face (v4,v0,v1)
//JVector.Cross(ref v4, ref v1, out temp1);
//float d1 = JVector.Dot(ref temp1, ref v0);
////// Compute the tetrahedron dividing face (v4,v0,v2)
//JVector.Cross(ref v4, ref v2, out temp1);
//float d2 = JVector.Dot(ref temp1, ref v0);
// Compute the tetrahedron dividing face (v4,v0,v3)
JVector.Cross(ref v4, ref v0, out temp1);
float dot = JVector.Dot(ref temp1, ref v1);
if (dot >= 0.0f)
{
dot = JVector.Dot(ref temp1, ref v2);
if (dot >= 0.0f)
{
// Inside d1 & inside d2 ==> eliminate v1
v1 = v4;
v11 = v41;
v12 = v42;
}
else
{
// Inside d1 & outside d2 ==> eliminate v3
v3 = v4;
v31 = v41;
v32 = v42;
}
}
else
{
dot = JVector.Dot(ref temp1, ref v3);
if (dot >= 0.0f)
{
// Outside d1 & inside d3 ==> eliminate v2
v2 = v4;
v21 = v41;
v22 = v42;
}
else
{
// Outside d1 & outside d3 ==> eliminate v1
v1 = v4;
v11 = v41;
v12 = v42;
}
}
}
}
}
/// <summary>
/// Adds a body to the fluid. Only bodies which where added
/// to the fluidvolume gets affected by buoyancy forces.
/// </summary>
/// <param name="body">The body which should be added.</param>
/// <param name="subdivisions">The object is subdivided in smaller objects
/// for which buoyancy force is calculated. The more subdivisons the better
/// the results. Note that the total number of subdivisions is subdivisions³.</param>
public void Add(RigidBody body, int subdivisions)
{
List <JVector> massPoints = new List <JVector>();
JVector testVector;
JVector diff = body.Shape.BoundingBox.Max - body.Shape.BoundingBox.Min;
if (diff.IsNearlyZero())
{
throw new InvalidOperationException("BoundingBox volume of the shape is zero.");
}
Multishape ms = body.Shape as Multishape;
int values = 0;
if (ms != null)
{
JBBox largeBox = JBBox.LargeBox;
values = ms.Prepare(ref largeBox);
}
for (int i = 0; i < subdivisions; i++)
{
for (int e = 0; e < subdivisions; e++)
{
for (int k = 0; k < subdivisions; k++)
{
testVector.X = body.Shape.BoundingBox.Min.X + (diff.X / (float)(subdivisions - 1)) * ((float)i);
testVector.Y = body.Shape.BoundingBox.Min.Y + (diff.Y / (float)(subdivisions - 1)) * ((float)e);
testVector.Z = body.Shape.BoundingBox.Min.Z + (diff.Z / (float)(subdivisions - 1)) * ((float)k);
JMatrix ident = JMatrix.Identity;
JVector zero = JVector.Zero;
if (ms != null)
{
for (int j = 0; j < values; j++)
{
ms.SetCurrentShape(j);
if (GJKCollide.Pointcast(body.Shape, ref ident,
ref zero, ref testVector))
{
massPoints.Add(testVector);
}
}
}
else
{
if (GJKCollide.Pointcast(body.Shape, ref ident,
ref zero, ref testVector))
{
massPoints.Add(testVector);
}
}
}
}
}
samples.Add(body.Shape, massPoints.ToArray());
bodies.Add(body);
}
