// WAM code
public void SetupWamMode()
{
Settings settings = reader.QueryDefaultSettings();
// Put the xArray into location mode
settings.XArray.Mode = XArrayMode.WideAreaMonitor;
settings.Report.IncludeAntennaPortNumber = true;
settings.Report.IncludePeakRssi = true;
// Set the reader mode, search mode and session
settings.ReaderMode = READER_MODE;
settings.SearchMode = WAM_SEARCH_MODE;
settings.Session = WAM_SESSION;
settings.TagPopulationEstimate = TAG_POPULATION_ESTIMATE;
// Enable all Antennas (Beams)
settings.Antennas.EnableAll();
// Gen2 Filtering
settings = SetupFilter(settings);
reader.ApplySettings(settings);
reader.TagsReported += OnTagsReported;
// Start reading.
reader.Start();
}
static void singleRead()
{
Settings settings = reader.QueryDefaultSettings();
reader.Start();
//DSForm = new FormRealTime(TagNames);
//Application.Run(DSForm);
Thread.Sleep(5000);
reader.Stop();
System.Console.WriteLine("IncomingTagNumber93 is:" + IncomingTagNumber93);
System.Console.WriteLine("IncomingTagNumber87 is:" + IncomingTagNumber87);
System.Console.WriteLine("IncomingTagNumber96 is:" + IncomingTagNumber96);
while (true)
{
//for (double i = 30; i > 29.75; i = i - 0.25)
//{
double i = 29.75;
//System.Diagnostics.Stopwatch sw = new System.Diagnostics.Stopwatch();
//sw.Start();
IncomingTagNumber93 = 0;
IncomingTagNumber87 = 0;
IncomingTagNumber96 = 0;
SpecifiedTx = i;
settings.Antennas.GetAntenna(1).TxPowerInDbm = SpecifiedTx;
reportSetting(settings);
settings.Antennas.DisableAll();
settings.Antennas.GetAntenna(1).IsEnabled = true;
settings.SearchMode = SearchMode.DualTarget;
settings.Session = 2;
settings.ReaderMode = ReaderMode.MaxThroughput;
settings.Report.Mode = ReportMode.Individual;
filterTags(settings);
//
reader.ApplySettings(settings);
reader.Start();
//AddRedundancy();//indicate the start
//
//reader.ApplySettings(settings);
//reader.Start();
Thread.Sleep(3000); //收集5s数据？
System.Console.WriteLine("Current Tx power is:" + settings.Antennas.GetAntenna(1).TxPowerInDbm);
reader.Stop();
System.Console.WriteLine("IncomingTagNumber93 is:" + IncomingTagNumber93);
System.Console.WriteLine("IncomingTagNumber87 is:" + IncomingTagNumber87);
System.Console.WriteLine("IncomingTagNumber96 is:" + IncomingTagNumber96);
//}
}
applicactionClose();
}
/// <exception cref="OctaneSdkException">Thrown when we can't connect to the reader</exception>
public void Start()
{
try {
impinjReader.Connect(readerAddress);
Console.WriteLine("Reader Connected");
} catch (OctaneSdkException e) {
Console.WriteLine(e.ToString());
Console.WriteLine("Attempting to reconnect in 3 seconds...");
Thread.Sleep(3000);
Start();
}
Settings settings = impinjReader.QueryDefaultSettings();
settings.SearchMode = SearchMode.DualTarget;
settings.LowDutyCycle = new LowDutyCycleSettings {
IsEnabled = true,
EmptyFieldTimeoutInMs = 10000,
FieldPingIntervalInMs = 300
};
settings.Session = 2;
settings.Report.Mode = ReportMode.Individual;
settings.Report.IncludePeakRssi = true;
settings.Report.IncludeLastSeenTime = true;
settings.Report.IncludeAntennaPortNumber = true;
settings.Keepalives.Enabled = true;
settings.Keepalives.PeriodInMs = 2000;
settings.Keepalives.EnableLinkMonitorMode = true;
settings.Keepalives.LinkDownThreshold = 5;
impinjReader.ApplySettings(settings);
impinjReader.Start();
}
static void OnConnectAsyncComplete(ImpinjReader reader, ConnectAsyncResult result, string errorMessage)
{
// This event handler is called asynchronously
// when the connection attempt has completed.
// Check the result of the connection attempt
if (result == ConnectAsyncResult.Success)
{
// Successfully connection to the reader. Now configure and start it.
Console.WriteLine("Successfully connected to {0}", reader.Address);
reader.ApplyDefaultSettings();
Console.WriteLine("Starting reader...");
reader.Start();
Console.WriteLine("Stopping reader in 5 seconds...");
Thread.Sleep(5000);
reader.Stop();
reader.Disconnect();
Console.WriteLine("Reader stopped. Press enter to exit.");
}
else
{
// Failed to connect to the reader
Console.WriteLine("Failure while connecting to {0} : {1}", reader.Address, errorMessage);
}
}
static void Main(string[] args)
{
Reader readerObject = new Reader();
ImpinjReader reader = new ImpinjReader();
Stopwatch s = new Stopwatch();
/*
* ARGUMENTS IN ORDER:
* 0: Hostname
* 1: Start Power
* 2: End Power
* 3: Step Size
* 4: Power Duration
* 5: CSV File name
*/
// variable initialization
string hostname = args[0];
double startPower = Convert.ToDouble(args[1]);
double endPower = Convert.ToDouble(args[2]);
double stepSize = Convert.ToDouble(args[3]);
int duration = Convert.ToInt32(args[4]);
string tagName = args[5];
double currentPower = startPower;
// start the margin test
readerObject.ConnectReader(reader, hostname, currentPower);
// creating event for when a tag is reportedi
reader.TagsReported += onTagsReported;
while (currentPower <= endPower)
{
if (reader.IsConnected)
{
reader.Start();
s.Start();
while (s.Elapsed < TimeSpan.FromSeconds(duration))
{
//Console.WriteLine("This is a test");
}
s.Reset();
reader.Stop();
WriteFileName(tagsRead, tagName, currentPower);
// clearing list contents to make room for the next powerlevel
tagsRead.Clear();
// updating the power setting before running the test again
currentPower = readerObject.UpdateSettings(reader, currentPower, stepSize);
}
else
{
Console.Write("Reader not connected! ");
System.Environment.Exit(1);
}
Console.WriteLine("Finished A power cycle");
}
Console.WriteLine("Margin test completed. Moving Outputs to /data");
reader.Disconnect();
}
private void buttonStart_Click(object sender, RoutedEventArgs e)
{
try
{
// Don't call the Start method if the
// reader is already running.
if (!reader.QueryStatus().IsSingulating)
{
// Start reading.
reader.Start();
}
}
catch (OctaneSdkException ex)
{
// An Octane SDK exception occurred. Handle it here.
System.Diagnostics.Trace.
WriteLine("An Octane SDK exception has occurred : {0}", ex.Message);
}
catch (Exception ex)
{
// A general exception occurred. Handle it here.
System.Diagnostics.Trace.
WriteLine("An exception has occurred : {0}", ex.Message);
}
}
public async Task StartReading()
{
await Task.Run(() =>
{
try
{
if (IsConnected)
{
impinjReader.Start();
_isReading = true;
}
}
catch (OctaneSdkException ex)
{
Console.WriteLine(ex.Message);
return(false);
}
catch (Exception ex)
{
Console.WriteLine("Exception {0}", ex);
return(false);
}
return(true);
});
}
public override void StartInventory()
{
if (!isInventory)
{
Invoke(new Action(() =>
{
dataGridView1_msg.Rows.Clear();
lblWorkStatus.Text = "开始扫描";
if (btnStart.Enabled)
{
Start();
}
label_readTags.Text = "0";
label11_writeTag.Text = "0";
}));
mWriteTagCount = 0;
mWriteSuccessTagCount = 0;
SetInventoryResult(0);
epcList.Clear();
mReader.Start();
isInventory = true;
lastReadTime = DateTime.Now;
}
}
public void LaunchXArray(ImpinjReader reader, XArray xArray)
{
try
{
// Connect to the reader.
// Change the ReaderHostname constant in SolutionConstants.cs
// to the IP address or hostname of your reader.
reader.Connect(xArray.Hostname);
// Assign the LocationReported event handler.
// This specifies which method to call
// when a location report is available.
reader.LocationReported += OnLocationReported;
// Don't forget to define diagnostic method
reader.DiagnosticsReported += OnDiagnosticsReported;
// Apply the newly modified settings.
reader.ApplySettings(GetPrepareSettings(reader, xArray));
// Start the reader
reader.Start();
}
catch (OctaneSdkException e)
{
// Handle Octane SDK errors.
Console.WriteLine("Octane SDK exception: {0}", e.Message);
}
catch (Exception e)
{
// Handle other .NET errors.
Console.WriteLine("Exception : {0}", e.Message);
}
}
private void epc_oku_Click(object sender, EventArgs e)
{
if (reader.IsConnected)
{
reader.Start();
}
}
public void Connect()
{
System.Diagnostics.Debug.WriteLine("Attempting to connect to RFID... ");
try
{
System.Diagnostics.Debug.WriteLine("RFID Hostname: " + Address);
reader.Connect(Address);
status = reader.QueryStatus();
if (status.IsConnected)
{
System.Diagnostics.Debug.WriteLine("RFID Reader Connected");
UpdateReaderSettings();
RefreshReaderDisplay();
reader.Start();
System.Diagnostics.Debug.WriteLine("Reader Ready...");
//this.CheckConnection(); //starts the connection monitor
}
else
{
System.Diagnostics.Debug.WriteLine("Connect to RFID reader failed...");
}
}
catch (OctaneSdkException err)
{
System.Diagnostics.Debug.WriteLine("Octane SDK exception: " + err.Message);
}
catch (Exception err)
{
System.Diagnostics.Debug.WriteLine("Exception: " + err.Message);
}
}
public void startRead()
{
try
{
if (mReaderType == READER_TYPE.READER_IMP)
{
mReaderIMP.Start();
}
if (mReaderType == READER_TYPE.READER_TM)
{
mReaderTM.StartReading();
}
if (mReaderType == READER_TYPE.READER_DLX_PM)
{
mReaderDLXPM.StartInventory(mComPort, RadioOperationMode.Continuous, 1);
}
if (mReaderType == READER_TYPE.READER_XD_PM)
{
mReaderXDPM.StartInventory(1000, 8192u, false);
}
}
catch (Exception)
{
}
}
static void Main(string[] args)
{
try
{
// Connect to the reader.
// Pass in a reader hostname or IP address as a
// command line argument when running the example
if (args.Length != 1)
{
Console.WriteLine("Error: No hostname specified. Pass in the reader hostname as a command line argument when running the Sdk Example.");
return;
}
string hostname = args[0];
reader.Connect(hostname);
// Get the default settings
// We'll use these as a starting point
// and then modify the settings we're
// interested in.
Settings settings = reader.QueryDefaultSettings();
// Tell the reader to include the TID
// in all tag reports. We will use FastID
// to do this. FastID is supported
// by Impinj Monza 4 and later tags.
settings.Report.IncludeFastId = true;
// Apply the newly modified settings.
reader.ApplySettings(settings);
// Assign the TagsReported event handler.
// This specifies which method to call
// when tags reports are available.
reader.TagsReported += OnTagsReported;
// Start reading.
reader.Start();
// Wait for the user to press enter.
Console.WriteLine("Press enter to exit.");
Console.ReadLine();
// Stop reading.
reader.Stop();
// Disconnect from the reader.
reader.Disconnect();
}
catch (OctaneSdkException e)
{
// Handle Octane SDK errors.
Console.WriteLine("Octane SDK exception: {0}", e.Message);
}
catch (Exception e)
{
// Handle other .NET errors.
Console.WriteLine("Exception : {0}", e.Message);
}
}
public static void initializeSettings(int numTags, TimeSeriesChart chart)
{
// Set the number of tags.
NUMTAGS = numTags;
// Set the chart.
if (chart != null)
{
timeSeriesChart = chart;
shouldGraph = true;
}
// Connect to the reader.
// Change the ReaderHostname constant in SolutionConstants.cs
// to the IP address or hostname of your reader.
reader.Connect(SolutionConstants.ReaderHostname);
/////////////////////////////////////////
// SETTINGS //
/////////////////////////////////////////
Settings settings = reader.QueryDefaultSettings();
// All data that we want tag to report.
settings.Report.IncludeAntennaPortNumber = true;
settings.Report.IncludeFirstSeenTime = true;
settings.Report.IncludePhaseAngle = true;
settings.Report.IncludePeakRssi = true;
settings.Report.IncludeChannel = true;
// Optimize reader for region with low number of tags, low chance of interference.
settings.ReaderMode = ReaderMode.MaxMiller;
settings.SearchMode = SearchMode.DualTarget;
// Enable antenna #1. Disable all others.
settings.Antennas.DisableAll();
settings.Antennas.GetAntenna(1).IsEnabled = true;
// Use same settings as the MultiReader software.
settings.Antennas.GetAntenna(1).TxPowerInDbm = 25;
settings.Antennas.GetAntenna(1).RxSensitivityInDbm = -70;
// Wait until tag query has ended before sending tag report.
settings.Report.Mode = ReportMode.WaitForQuery;
// Apply the newly modified settings.
reader.ApplySettings(settings);
// Assign the TagsReported event handler. (Gets all of the tags)
reader.TagsReported += OnTagsReported;
// Start reading.
reader.Start();
// Initialize CSV Files.
File.WriteAllText(@"deltatime.csv", string.Empty);
File.WriteAllText(@"rssi.csv", string.Empty);
File.WriteAllText(@"velocity.csv", string.Empty);
Console.WriteLine("Initialized Reader");
}
static void Main(string[] args)
{
try
{
// Connect to the reader.
// Pass in a reader hostname or IP address as a
// command line argument when running the example
if (args.Length != 1)
{
Console.WriteLine("Error: No hostname specified. Pass in the reader hostname as a command line argument when running the Sdk Example.");
return;
}
string hostname = args[0];
reader.Connect(hostname);
// Assign the TagOpComplete event handler.
// This specifies which method to call
// when tag operations are complete.
reader.TagOpComplete += OnTagOpComplete;
// Apply the default settings.
reader.ApplyDefaultSettings();
// Start reading.
reader.Start();
Console.WriteLine("Writing to the tag. Press enter when the operation is complete.");
// Write random words to user memory
TagData data = GetRandomData(NUM_WORDS_USER_MEMORY);
BulkWrite(null, MemoryBank.User, 0, data);
Console.ReadLine();
// Remove all operation sequences from the reader that haven't executed.
reader.DeleteAllOpSequences();
Console.WriteLine("Reading from the tag. Press enter when the operation is complete.");
// Read all of User memory
BulkRead(null, MemoryBank.User, 0, NUM_WORDS_USER_MEMORY);
Console.ReadLine();
// Stop reading.
reader.Stop();
// Disconnect from the reader.
reader.Disconnect();
}
catch (OctaneSdkException e)
{
// Handle Octane SDK errors.
Console.WriteLine("Octane SDK exception: {0}", e.Message);
}
catch (Exception e)
{
// Handle other .NET errors.
Console.WriteLine("Exception : {0}", e.Message);
}
}
static void Main(string[] args)
{
try
{
// Connect to the reader.
// Change the ReaderHostname constant in SolutionConstants.cs
// to the IP address or hostname of your reader.
reader.Connect(SolutionConstants.ReaderHostname);
// Get the default settings
// We'll use these as a starting point
// and then modify the settings we're
// interested in.
Settings settings = reader.QueryDefaultSettings();
// Tell the reader to include the
// RF doppler frequency in all tag reports.
settings.Report.IncludeDopplerFrequency = true;
// Use antenna #1
settings.Antennas.DisableAll();
settings.Antennas.GetAntenna(1).IsEnabled = true;
// ReaderMode must be set to DenseReaderM8.
settings.ReaderMode = ReaderMode.DenseReaderM8;
// Apply the newly modified settings.
reader.ApplySettings(settings);
// Assign the TagsReported event handler.
// This specifies which method to call
// when tags reports are available.
reader.TagsReported += OnTagsReported;
// Start reading.
reader.Start();
// Wait for the user to press enter.
Console.WriteLine("Press enter to exit.");
Console.ReadLine();
// Stop reading.
reader.Stop();
// Disconnect from the reader.
reader.Disconnect();
}
catch (OctaneSdkException e)
{
// Handle Octane SDK errors.
Console.WriteLine("Octane SDK exception: {0}", e.Message);
}
catch (Exception e)
{
// Handle other .NET errors.
Console.WriteLine("Exception : {0}", e.Message);
}
}
static void Main(string[] args)
{
try
{
// Connect to the reader.
// Pass in a reader hostname or IP address as a
// command line argument when running the example
if (args.Length != 1)
{
Console.WriteLine("Error: No hostname specified. Pass in the reader hostname as a command line argument when running the Sdk Example.");
return;
}
string hostname = args[0];
reader.Connect(hostname);
// Get the default settings
// We'll use these as a starting point
// and then modify the settings we're
// interested in.
Settings settings = reader.QueryDefaultSettings();
// Enable all of the antenna ports.
settings.Antennas.EnableAll();
// Apply the newly modified settings.
reader.ApplySettings(settings);
// Assign handlers for various reader events.
reader.GpiChanged += OnGpiEvent;
reader.AntennaChanged += OnAntennaEvent;
reader.ReaderStarted += OnReaderStarted;
reader.ReaderStopped += OnReaderStopped;
// Start the reader (required for antenna events).
reader.Start();
// Wait for the user to press enter.
Console.WriteLine("Press enter to exit.");
Console.ReadLine();
// Stop reading.
reader.Stop();
// Disconnect from the reader.
reader.Disconnect();
}
catch (OctaneSdkException e)
{
// Handle Octane SDK errors.
Console.WriteLine("Octane SDK exception: {0}", e.Message);
}
catch (Exception e)
{
// Handle other .NET errors.
Console.WriteLine("Exception : {0}", e.Message);
}
}
static void Main(string[] args)
{
// Defines the sources of configuration information for the
// application.
var builder = new ConfigurationBuilder()
.SetBasePath(Directory.GetCurrentDirectory())
.AddJsonFile("appsettings.json");
// Create the configuration object that the application will
// use to retrieve configuration information.
var configuration = builder.Build();
// Retrieve the configuration information.
configValue = configuration.GetConnectionString("MainDisplayDB");
Console.WriteLine("a. The read tag will automatically be served to the Teleprompt Screen, if the screen is empty");
Console.WriteLine("b. If the screen is not empty, await the read tag to queue until available");
Console.WriteLine("c. If the screen is empty and there's queue waiting. Pop the queue and load to Teleprompt screen");
try
{
reader.Connect(SolutionConstants.ReaderHostname);
reader.TagsReported += OnTagsReported;
reader.ApplyDefaultSettings();
reader.Start();
Console.WriteLine("\n\nEnter word. 'Yallah!' to quit.\n\n\n");
string quitline = Console.ReadLine();
if (quitline.ToLower() == "yallah!")
{
Console.WriteLine("\n\nExiting!!!");
reader.Stop();
reader.Disconnect();
}
}
catch (OctaneSdkException e)
{
Console.WriteLine("Octane SDK exception: {0}", e.Message);
Console.ReadLine();
}
catch (Exception e)
{
Console.WriteLine("Exception : {0}", e.Message);
Console.ReadLine();
}
}
/// <summary>
/// Start method from main thread
/// </summary>
public void Run()
{
try
{
Reader.Connect(Properties.Resources.ReaderHost);
Impinj.OctaneSdk.Settings settings = Reader.QueryDefaultSettings();
settings.Report.IncludeAntennaPortNumber = true;
settings.Report.IncludePeakRssi = true;
settings.Report.IncludeDopplerFrequency = true;
settings.Report.IncludePhaseAngle = true;
settings.Report.IncludeLastSeenTime = true;
settings.Report.IncludeChannel = true;
settings.ReaderMode = ReaderMode.MaxMiller;
settings.SearchMode = SearchMode.DualTarget;
settings.Session = 2;
settings.Antennas.DisableAll();
settings.Antennas.GetAntenna(1).IsEnabled = true;
settings.Antennas.GetAntenna(2).IsEnabled = true;
settings.Antennas.GetAntenna(3).IsEnabled = true;
settings.Antennas.GetAntenna(4).IsEnabled = true;
settings.Antennas.GetAntenna(1).MaxTxPower = true;
settings.Antennas.GetAntenna(1).MaxRxSensitivity = true;
settings.Antennas.GetAntenna(2).MaxTxPower = true;
settings.Antennas.GetAntenna(2).MaxRxSensitivity = true;
settings.Antennas.GetAntenna(3).MaxTxPower = true;
settings.Antennas.GetAntenna(3).MaxRxSensitivity = true;
settings.Antennas.GetAntenna(4).MaxTxPower = true;
settings.Antennas.GetAntenna(4).MaxRxSensitivity = true;
Reader.ApplySettings(settings);
Reader.TagsReported += OnTagsReported;
Reader.Start();
ObjectUpdate.Elapsed += new ElapsedEventHandler(UpdateObjectStatus);
ObjectUpdate.Interval = 1 * 1000;
ObjectUpdate.Enabled = true;
}
catch (OctaneSdkException e)
{
Console.WriteLine("Octane SDK exception: {0}", e.Message);
ErrorHandler.ProcessRFIDConnectionError();
}
catch (Exception e)
{
Console.WriteLine("Exception : {0}", e.Message);
ErrorHandler.ProcessRFIDConnectionError();
}
}
static void Main(string[] args)
{
try
{
// This example show the minimum program required to read tags.
// If you require more control over the reader settings,
// take a look at the ReadTags example.
// Connect to the reader.
// Pass in a reader hostname or IP address as a
// command line argument when running the example
/*if (args.Length != 1)
* {
* Console.WriteLine("Error: No hostname specified. Pass in the reader hostname as a command line argument when running the Sdk Example.");
* return;
* }
* string hostname = args[0];*/
string hostname = "speedwayr-10-9f-bb.local";
reader.Connect(hostname);
// Assign the TagsReported event handler.
// This specifies which method to call
// when tags reports are available.
reader.TagsReported += OnTagsReported;
// Apply the default settings.
reader.ApplyDefaultSettings();
// Start reading.
reader.Start();
// Wait for the user to press enter.
Console.WriteLine("Press enter to exit.");
Console.ReadLine();
// Stop reading.
reader.Stop();
// Disconnect from the reader.
reader.Disconnect();
}
catch (OctaneSdkException e)
{
// Handle Octane SDK errors.
Console.WriteLine("Octane SDK exception: {0}", e.Message);
}
catch (Exception e)
{
// Handle other .NET errors.
Console.WriteLine("Exception : {0}", e.Message);
}
}
static void Main(string[] args)
{
try
{
// Connect to the reader.
// Change the ReaderHostname constant in SolutionConstants.cs
// to the IP address or hostname of your reader.
reader.Connect(SolutionConstants.ReaderHostname);
// Get the default settings
// We'll use these as a starting point
// and then modify the settings we're
// interested in.
Settings settings = reader.QueryDefaultSettings();
// Tell the reader to include the TID
// in all tag reports. We will use FastID
// to do this. FastID is supported
// by Impinj Monza 4 and later tags.
settings.Report.IncludeFastId = true;
// Apply the newly modified settings.
reader.ApplySettings(settings);
// Assign the TagsReported event handler.
// This specifies which method to call
// when tags reports are available.
reader.TagsReported += OnTagsReported;
// Start reading.
reader.Start();
// Wait for the user to press enter.
Console.WriteLine("Press enter to exit.");
Console.ReadLine();
// Stop reading.
reader.Stop();
// Disconnect from the reader.
reader.Disconnect();
}
catch (OctaneSdkException e)
{
// Handle Octane SDK errors.
Console.WriteLine("Octane SDK exception: {0}", e.Message);
}
catch (Exception e)
{
// Handle other .NET errors.
Console.WriteLine("Exception : {0}", e.Message);
}
}
static void Main(string[] args)
{
try
{
// Connect to the reader.
// Change the ReaderHostname constant in SolutionConstants.cs
// to the IP address or hostname of your reader.
reader.Connect(SolutionConstants.ReaderHostname);
// Assign the TagOpComplete event handler.
// This specifies which method to call
// when tag operations are complete.
reader.TagOpComplete += OnTagOpComplete;
// Apply the default settings.
reader.ApplyDefaultSettings();
// Start reading.
reader.Start();
Console.WriteLine("Writing to the tag. Press enter when the operation is complete.");
// Write random words to user memory
TagData data = GetRandomData(NUM_WORDS_USER_MEMORY);
BulkWrite(null, MemoryBank.User, 0, data);
Console.ReadLine();
// Remove all operation sequences from the reader that haven't executed.
reader.DeleteAllOpSequences();
Console.WriteLine("Reading from the tag. Press enter when the operation is complete.");
// Read all of User memory
BulkRead(null, MemoryBank.User, 0, NUM_WORDS_USER_MEMORY);
Console.ReadLine();
// Stop reading.
reader.Stop();
// Disconnect from the reader.
reader.Disconnect();
}
catch (OctaneSdkException e)
{
// Handle Octane SDK errors.
Console.WriteLine("Octane SDK exception: {0}", e.Message);
}
catch (Exception e)
{
// Handle other .NET errors.
Console.WriteLine("Exception : {0}", e.Message);
}
}
private static void Reader_ConnectAsyncComplete(ImpinjReader reader, ConnectAsyncResult result, string errorMessage)
{
if (result == ConnectAsyncResult.Success)
{
reader.ApplyDefaultSettings();
reader.Start();
Console.WriteLine("Started...");
}
else
{
Console.WriteLine(errorMessage);
}
}
static void Main(string[] args)
{
try
{
// Connect to the reader.
// Change the ReaderHostname constant in SolutionConstants.cs
// to the IP address or hostname of your reader.
reader.Connect(SolutionConstants.ReaderHostname);
// Get the default settings
// We'll use these as a starting point
// and then modify the settings we're
// interested in.
Settings settings = reader.QueryDefaultSettings();
// Enable all of the antenna ports.
settings.Antennas.EnableAll();
// Apply the newly modified settings.
reader.ApplySettings(settings);
// Assign handlers for various reader events.
reader.GpiChanged += OnGpiEvent;
reader.AntennaChanged += OnAntennaEvent;
reader.ReaderStarted += OnReaderStarted;
reader.ReaderStopped += OnReaderStopped;
// Start the reader (required for antenna events).
reader.Start();
// Wait for the user to press enter.
Console.WriteLine("Press enter to exit.");
Console.ReadLine();
// Stop reading.
reader.Stop();
// Disconnect from the reader.
reader.Disconnect();
}
catch (OctaneSdkException e)
{
// Handle Octane SDK errors.
Console.WriteLine("Octane SDK exception: {0}", e.Message);
}
catch (Exception e)
{
// Handle other .NET errors.
Console.WriteLine("Exception : {0}", e.Message);
}
}
// Use this for initialization
void Start()
{
// init bricks
ImpinjReader reader = new ImpinjReader();
var cube2 = GameObject.CreatePrimitive(PrimitiveType.Cube);
cube2.AddComponent <Rigidbody> ();
cube2.transform.position = new Vector3(0, 5, 3);
try
{
reader.Connect("SpeedwayR-10-25-32");
Settings settings = reader.QueryDefaultSettings();
// Enable all of the antenna ports.
settings.Antennas.EnableAll();
// Apply the newly modified settings.
reader.ApplySettings(settings);
// Assign event handlers for GPI and antenna events.
// reader.GpiChanged += OnGpiEvent;
// reader.AntennaChanged += OnAntennaEvent;
// Start the reader (required for antenna events).
reader.Start();
// Wait for the user to press enter.
print("Press enter to exit.");
Console.ReadLine();
// Stop reading.
reader.Stop();
// Disconnect from the reader.
reader.Disconnect();
}
catch (OctaneSdkException e)
{
// Handle Octane SDK errors.
print(e.Message);
print("oct");
}
catch (Exception e)
{
// Handle other .NET errors.
print("net");
print(e.Message);
print("net");
}
}
//Boton para iniciar lectura del speedway
private void button1_Click(object sender, EventArgs e)
{
switch (btnIniDetLectSpeedway.Text)
{
case "Iniciar Lectura Speedway":
#region Speedway
try
{
reader.ApplyDefaultSettings();
Settings settings = reader.QuerySettings();
settings.Antennas.DisableAll();
settings.Antennas.GetAntenna(1).IsEnabled = true;
settings.Report.Mode = ReportMode.BatchAfterStop;
settings.Report.Mode = ReportMode.BatchAfterStop;
settings.AutoStart.Mode = AutoStartMode.Periodic;
settings.AutoStart.PeriodInMs = 3000;
settings.AutoStop.Mode = AutoStopMode.Duration;
settings.AutoStop.DurationInMs = 1500;
reader.ApplySettings(settings);
btnIniDetLectSpeedway.Text = "Detener Lectura Speedway";
reader.TagsReported += OnTagsReported;
reader.Start();
}
catch
{
MessageBox.Show("Speedway no conectado");
}
#endregion
break;
case "Detener Lectura Speedway":
//reader.Stop();
btnIniDetLectSpeedway.Text = "Iniciar Lectura Speedway";
reader.TagsReported -= OnTagsReported;
break;
}
}
private void connect()
{
rdr = new ImpinjReader();
rdr.Name = ReaderIP + ":" + reader_port;
Console.WriteLine("connecting to: " + ReaderIP + ":" + reader_port);
//rdr.Connect(reader_ip, reader_port);
rdr.Connect(ReaderIP);
rdr.ApplyDefaultSettings();
rdr.TagsReported += OnTagsReported;
LoadSettings();
rdr.Start();
startedEvent(this, EventArgs.Empty);
}
public void connect()
{
rdr = new ImpinjReader();
rdr.Name = reader_ip + ":" + reader_port;
Console.WriteLine("connecting to: " + reader_ip + ":" + reader_port);
//rdr.Connect(reader_ip, reader_port);
rdr.Connect(reader_ip);
rdr.ApplyDefaultSettings();
rdr.TagsReported += OnTagsReported;
ReadSettingsFromFile();
rdr.Start();
statusLabel.ForeColor = Color.Green;
statusLabel.Text = "Status: Connected";
}
public bool StartRead()
{
try
{
reader.Start();
return(true);
}
catch (Exception ex)
{
return(false);
}
finally
{
}
}
public void startRead()
{
try
{
if (mReaderType == READER_TYPE.READER_IMP)
{
mReaderIMP.Start();
}
if (mReaderType == READER_TYPE.READER_TM)
{
mReaderTM.StartReading();
}
}
catch (Exception)
{
}
}