public void selEdge(string promt, SelectionFilterEnum filter)
{
PartFeature pf = CmdMgr.Pick(filter, promt) as PartFeature;
HoleFeature hf = pf as HoleFeature;
if (hf == null)
{
return;
}
//ICollection<Edge> col = null;
foreach (Face item in hf.SideFaces)
{
Edge ed = checkBox1.Checked ? item.Edges[2] : item.Edges[1];
edges.Add(ed);
}
// System.Collections.IEnumerator en = PartCompDef.Features.GetEnumerator();
// en.Reset();
// while(en.Current != null)
// {
// en.
// }
PartCompDef = hf.Parent as PartComponentDefinition;
// for (int i = 1; i < PartCompDef.Features.Count; i++)
// {
// MirrorFeature mf = PartCompDef.Features[i] as MirrorFeature;
// if (mf == null) continue;
// HoleFeature holeF = PartCompDef.Features[i - 1] as HoleFeature;
// if (hf == null)
// holeF = PartCompDef.Features[i - 2] as HoleFeature;
// else
// continue;
// foreach (PartFeature item in mf.ParentFeatures)
// {
// if (item is HoleFeature && holeF.Equals(item))
// {
// if (mf.Faces[1].SurfaceType == SurfaceTypeEnum.kCylinderSurface)
// edges.Add(mf.Faces[1].Edges[1]);
// }
// }
// }
foreach (MirrorFeature item in PartCompDef.Features.MirrorFeatures)
{
foreach (PartFeature m in item.ParentFeatures)
{
if (m.Equals(hf))
{
if (item.Faces[1].SurfaceType != SurfaceTypeEnum.kCylinderSurface)
{
continue;
}
Edge ed = checkBox1.Checked ? item.Faces[1].Edges[2] : item.Faces[1].Edges[1];
edges.Add(ed);
}
}
}
}
private void createPart2()
{
// create a new part
PartDocument oDoc = (PartDocument)mApp.Documents.Add(DocumentTypeEnum.kPartDocumentObject);
PartComponentDefinition oDef = oDoc.ComponentDefinition;
TransientGeometry oTG = mApp.TransientGeometry;
// create sketch elements
PlanarSketch oSketch = oDef.Sketches.Add(oDef.WorkPlanes[3]);
oSketch.SketchLines.AddAsTwoPointRectangle(oTG.CreatePoint2d(-5, -5), oTG.CreatePoint2d(5, 5));
SketchPoint oSketchPt = oSketch.SketchPoints.Add(oTG.CreatePoint2d(0, 0));
Profile oProfile = oSketch.Profiles.AddForSolid();
// create a plate with a hole feature
ExtrudeDefinition oExtrudDef = oDef.Features.ExtrudeFeatures.CreateExtrudeDefinition(oProfile, PartFeatureOperationEnum.kJoinOperation);
oExtrudDef.SetDistanceExtent(1, PartFeatureExtentDirectionEnum.kPositiveExtentDirection);
ExtrudeFeature oExtrudeF = oDef.Features.ExtrudeFeatures.Add(oExtrudDef);
// Create an object collection for the hole center points.
ObjectCollection oHoleCenters = default(ObjectCollection);
oHoleCenters = mApp.TransientObjects.CreateObjectCollection();
oHoleCenters.Add(oSketchPt);
// create hole feature
HolePlacementDefinition oHPdef = (HolePlacementDefinition)oDef.Features.HoleFeatures.CreateSketchPlacementDefinition(oHoleCenters);
HoleFeature oHoleF = oDef.Features.HoleFeatures.AddDrilledByThroughAllExtent(oHPdef, "2", PartFeatureExtentDirectionEnum.kNegativeExtentDirection);
Face oFace = oHoleF.SideFaces[1];
AttributeSet oAttSet = default(AttributeSet);
Inventor.Attribute oAtt = null;
oAttSet = oFace.AttributeSets.Add("demoAttset");
oAtt = oAttSet.Add("demoAtt", ValueTypeEnum.kStringType, "namedEdge");
if (System.IO.File.Exists("c:\temp\test2.ipt"))
{
System.IO.File.Delete("c:\temp\test2.ipt");
}
oDoc.SaveAs("c:\\temp\\test2.ipt", false);
}
/// <summary>
/// creation of hole tables in a drawing.
/// Select a drawing view that contains holes and run the following sample
/// </summary>
/// <remarks></remarks>
public void CreateHoleTables()
{
// Set a reference to the drawing document.
// This assumes a drawing document is active.
DrawingDocument oDrawDoc = (DrawingDocument)_InvApplication.ActiveDocument;
// Set a reference to the active sheet.
Sheet oActiveSheet = oDrawDoc.ActiveSheet;
// Set a reference to the drawing view.
// This assumes that a drawing view is selected.
DrawingView oDrawingView = oDrawDoc.SelectSet[1];
// Create origin indicator if it has not been already created.
if (!oDrawingView.HasOriginIndicator)
{
// Create point intent to anchor the origin to.
GeometryIntent oDimIntent = null;
Point2d oPointIntent = null;
// Get the first curve on the view
DrawingCurve oCurve = oDrawingView.get_DrawingCurves()[1];
// Check if it has a strt point
oPointIntent = oCurve.StartPoint;
if (oPointIntent == null)
{
// Else use the center point
oPointIntent = oCurve.CenterPoint;
}
oDimIntent = oActiveSheet.CreateGeometryIntent(oCurve, oPointIntent);
oDrawingView.CreateOriginIndicator(oDimIntent);
}
Point2d oPlacementPoint = null;
// Set a reference to th sheet's border
Inventor.Border oBorder = oActiveSheet.Border;
if ((oBorder != null))
{
// A border exists. The placement point
// is the top-left corner of the border.
oPlacementPoint = _InvApplication.TransientGeometry.CreatePoint2d(oBorder.RangeBox.MinPoint.X, oBorder.RangeBox.MaxPoint.Y);
}
else
{
// There is no border. The placement point
// is the top-left corner of the sheet.
oPlacementPoint = _InvApplication.TransientGeometry.CreatePoint2d(0, oActiveSheet.Height);
}
// Create a 'view' hole table
// This hole table includes all holes as specified by the active hole table style
HoleTable oViewHoleTable = default(HoleTable);
oViewHoleTable = oActiveSheet.HoleTables.Add(oDrawingView, oPlacementPoint);
oPlacementPoint.X = oActiveSheet.Width / 2;
// Create a 'feature type' hole table
// This hole table includes specified hole types only
HoleTable oFeatureHoleTable = oActiveSheet.HoleTables.AddByFeatureType(oDrawingView, oPlacementPoint, true, true, true, true, false, false, false);
//add a new row
// get the model document
Document oModelDoc = oDrawingView.ReferencedDocumentDescriptor.ReferencedDocument;
HoleFeature oHoleF = null;
if (oModelDoc.DocumentType == DocumentTypeEnum.kAssemblyDocumentObject)
{
AssemblyDocument oRefAssDoc = (AssemblyDocument)oModelDoc;
AssemblyComponentDefinition oAssDef = oRefAssDoc.ComponentDefinition;
if (oAssDef.Features.HoleFeatures.Count > 0)
{
//as a demo: get the first hole feature
oHoleF = oAssDef.Features.HoleFeatures[1];
}
}
else if (oModelDoc.DocumentType == DocumentTypeEnum.kPartDocumentObject)
{
PartDocument oRefPartDoc = (PartDocument)oModelDoc;
PartComponentDefinition oPartDef = oRefPartDoc.ComponentDefinition;
if (oPartDef.Features.HoleFeatures.Count > 0)
{
//as a demo: get the first hole feature
oHoleF = oPartDef.Features.HoleFeatures[1];
}
}
// add a new row to the hole table
if ((oHoleF != null))
{
DrawingCurvesEnumerator oHoleCurves = oDrawingView.get_DrawingCurves(oHoleF);
if (oHoleCurves.Count > 0)
{
oFeatureHoleTable.HoleTableRows.Add(oHoleCurves[1]);
}
}
}