public static RegionRemesher QuickRemesh(DMesh3 mesh, int[] tris,
double targetEdgeLen, double smoothSpeed,
int rounds,
IProjectionTarget target,
QuickRemeshFlags flags = QuickRemeshFlags.PreventNormalFlips)
{
var remesh = new RegionRemesher(mesh, tris);
if (target != null)
{
remesh.SetProjectionTarget(target);
}
remesh.SetTargetEdgeLength(targetEdgeLen);
remesh.SmoothSpeedT = smoothSpeed;
if ((flags & QuickRemeshFlags.PreventNormalFlips) != 0)
{
remesh.PreventNormalFlips = true;
}
for (int k = 0; k < rounds; ++k)
{
remesh.BasicRemeshPass();
}
remesh.BackPropropagate();
return(remesh);
}
// This function does local remeshing around a boundary loop within a fixed # of
// rings, to try to 'massage' it into a cleaner shape/topology
// [TODO] use geodesic distance instead of fixed # of rings?
public static void cleanup_boundary(DMesh3 mesh, EdgeLoop loop, double target_edge_len, int nRings = 3)
{
Debug.Assert(loop.IsBoundaryLoop());
MeshFaceSelection roi = new MeshFaceSelection(mesh);
roi.SelectVertexOneRings(loop.Vertices);
for (int i = 0; i < nRings; ++i)
{
roi.ExpandToOneRingNeighbours();
}
roi.LocalOptimize(true, true);
RegionRemesher r = new RegionRemesher(mesh, roi.ToArray());
r.Precompute();
r.EnableFlips = r.EnableSplits = r.EnableCollapses = true;
r.MinEdgeLength = target_edge_len;
r.MaxEdgeLength = 2 * target_edge_len;
r.EnableSmoothing = true;
r.SmoothSpeedT = 0.1f;
for (int k = 0; k < nRings * 3; ++k)
{
r.BasicRemeshPass();
}
Debug.Assert(mesh.CheckValidity());
r.BackPropropagate();
}
// This function does local remeshing around a boundary loop within a fixed # of
// rings, to try to 'massage' it into a cleaner shape/topology.
// The result_edges list is the mapped edges of loop on the resulting mesh, but it is *not* in-order
// [TODO] use geodesic distance instead of fixed # of rings?
public static void cleanup_boundary(DMesh3 mesh, EdgeLoop loop, double target_edge_len, out List <int> result_edges, int nRings = 3)
{
Debug.Assert(loop.IsBoundaryLoop());
var roi = new MeshFaceSelection(mesh);
roi.SelectVertexOneRings(loop.Vertices);
for (int i = 0; i < nRings; ++i)
{
roi.ExpandToOneRingNeighbours();
}
roi.LocalOptimize(true, true);
var r = new RegionRemesher(mesh, roi.ToArray());
// tag the input loop edges in the remesher, so that we can find this loop afterwards
int[] init_loop_edges = new int[loop.EdgeCount];
Array.Copy(loop.Edges, init_loop_edges, loop.EdgeCount);
r.Region.MapEdgesToSubmesh(init_loop_edges);
MeshConstraintUtil.AddTrackedEdges(r.Constraints, init_loop_edges, 100);
//foreach (int eid in init_loop_edges)
// Debug.Assert(r.Region.SubMesh.IsBoundaryEdge(eid));
r.Precompute();
r.EnableFlips = r.EnableSplits = r.EnableCollapses = true;
r.MinEdgeLength = target_edge_len;
r.MaxEdgeLength = 2 * target_edge_len;
r.EnableSmoothing = true;
r.SmoothSpeedT = 0.1f;
for (int k = 0; k < nRings * 3; ++k)
{
r.BasicRemeshPass();
}
Debug.Assert(mesh.CheckValidity());
// extract the edges we tagged (they are unordered)
List <int> new_loop_edges = r.Constraints.FindConstrainedEdgesBySetID(100);
//foreach (int eid in new_loop_edges)
// Debug.Assert(r.Region.SubMesh.IsBoundaryEdge(eid));
r.BackPropropagate();
// map the extracted edges back to the backpropped input mesh
result_edges = MeshIndexUtil.MapEdgesViaVertexMap(r.ReinsertSubToBaseMapV, r.Region.SubMesh, r.BaseMesh, new_loop_edges);
//foreach (int eid in result_edges)
// Debug.Assert(mesh.IsBoundaryEdge(eid));
}
public static RegionRemesher QuickRemesh(DMesh3 mesh, int[] tris,
double targetEdgeLen, double smoothSpeed,
int rounds,
IProjectionTarget target)
{
RegionRemesher remesh = new RegionRemesher(mesh, tris);
if (target != null)
{
remesh.SetProjectionTarget(target);
}
remesh.SetTargetEdgeLength(targetEdgeLen);
remesh.SmoothSpeedT = smoothSpeed;
for (int k = 0; k < rounds; ++k)
{
remesh.BasicRemeshPass();
}
remesh.BackPropropagate();
return(remesh);
}
public virtual bool Trim()
{
if (Spatial == null)
{
Spatial = new DMeshAABBTree3(new DMesh3(Mesh, false, MeshComponents.None));
Spatial.Build();
}
if (seed_tri == -1)
{
seed_tri = Spatial.FindNearestTriangle(seed_pt);
}
var loop = new MeshFacesFromLoop(Mesh, TrimLine, Spatial, seed_tri);
MeshFaceSelection selection = loop.ToSelection();
selection.LocalOptimize(true, true);
var editor = new MeshEditor(Mesh);
editor.RemoveTriangles(selection, true);
var components = new MeshConnectedComponents(Mesh);
components.FindConnectedT();
if (components.Count > 1)
{
int keep = components.LargestByCount;
for (int i = 0; i < components.Count; ++i)
{
if (i != keep)
{
editor.RemoveTriangles(components[i].Indices, true);
}
}
}
editor.RemoveAllBowtieVertices(true);
var loops = new MeshBoundaryLoops(Mesh);
bool loopsOK = false;
try
{
loopsOK = loops.Compute();
}
catch (Exception)
{
return(false);
}
if (!loopsOK)
{
return(false);
}
// [TODO] to support trimming mesh w/ existing holes, we need to figure out which
// loop we created in RemoveTriangles above!
if (loops.Count > 1)
{
return(false);
}
int[] loopVerts = loops[0].Vertices;
var borderTris = new MeshFaceSelection(Mesh);
borderTris.SelectVertexOneRings(loopVerts);
borderTris.ExpandToOneRingNeighbours(RemeshBorderRings);
var remesh = new RegionRemesher(Mesh, borderTris.ToArray());
remesh.Region.MapVerticesToSubmesh(loopVerts);
double target_len = TargetEdgeLength;
if (target_len <= 0)
{
double mine, maxe, avge;
MeshQueries.EdgeLengthStatsFromEdges(Mesh, loops[0].Edges, out mine, out maxe, out avge);
target_len = avge;
}
var meshTarget = new MeshProjectionTarget(Spatial.Mesh, Spatial);
remesh.SetProjectionTarget(meshTarget);
remesh.SetTargetEdgeLength(target_len);
remesh.SmoothSpeedT = SmoothingAlpha;
var curveTarget = new DCurveProjectionTarget(TrimLine);
var multiTarget = new SequentialProjectionTarget(curveTarget, meshTarget);
int set_id = 3;
MeshConstraintUtil.ConstrainVtxLoopTo(remesh, loopVerts, multiTarget, set_id);
for (int i = 0; i < RemeshRounds; ++i)
{
remesh.BasicRemeshPass();
}
remesh.BackPropropagate();
// [TODO] output loop somehow...use MeshConstraints.FindConstrainedEdgesBySetID(set_id)...
return(true);
} // Trim()
public void Close_Flat()
{
double minlen, maxlen, avglen;
MeshQueries.EdgeLengthStats(Mesh, out minlen, out maxlen, out avglen, 1000);
double target_edge_len = (TargetEdgeLen <= 0) ? avglen : TargetEdgeLen;
// massage around boundary loop
List <int> refinedBorderEdges;
cleanup_boundary(Mesh, InitialBorderLoop, avglen, out refinedBorderEdges, 3);
// find new border loop. try to find new loop containing edges from loop we refined in cleanup_boundary,
// if that fails just use largest loop.
MeshBoundaryLoops loops = new MeshBoundaryLoops(Mesh);
int iloop = loops.FindLoopContainingEdge(refinedBorderEdges[0]);
if (iloop == -1)
{
iloop = loops.MaxVerticesLoopIndex;
}
EdgeLoop fill_loop = loops.Loops[iloop];
int extrude_group = (ExtrudeGroup == -1) ? Mesh.AllocateTriangleGroup() : ExtrudeGroup;
int fill_group = (FillGroup == -1) ? Mesh.AllocateTriangleGroup() : FillGroup;
// decide on projection plane
//AxisAlignedBox3d loopbox = fill_loop.GetBounds();
//Vector3d topPt = loopbox.Center;
//if ( bIsUpper ) {
// topPt.y = loopbox.Max.y + 0.25 * dims.y;
//} else {
// topPt.y = loopbox.Min.y - 0.25 * dims.y;
//}
//Frame3f plane = new Frame3f((Vector3f)topPt);
// extrude loop to this plane
MeshExtrudeLoop extrude = new MeshExtrudeLoop(Mesh, fill_loop);
extrude.PositionF = (v, n, i) => {
return(FlatClosePlane.ProjectToPlane((Vector3f)v, 1));
};
extrude.Extrude(extrude_group);
MeshValidation.IsBoundaryLoop(Mesh, extrude.NewLoop);
Debug.Assert(Mesh.CheckValidity());
// smooth the extrude loop
MeshLoopSmooth loop_smooth = new MeshLoopSmooth(Mesh, extrude.NewLoop);
loop_smooth.ProjectF = (v, i) => {
return(FlatClosePlane.ProjectToPlane((Vector3f)v, 1));
};
loop_smooth.Alpha = 0.5f;
loop_smooth.Rounds = 100;
loop_smooth.Smooth();
Debug.Assert(Mesh.CheckValidity());
// fill result
SimpleHoleFiller filler = new SimpleHoleFiller(Mesh, extrude.NewLoop);
filler.Fill(fill_group);
Debug.Assert(Mesh.CheckValidity());
// make selection for remesh region
MeshFaceSelection remesh_roi = new MeshFaceSelection(Mesh);
remesh_roi.Select(extrude.NewTriangles);
remesh_roi.Select(filler.NewTriangles);
remesh_roi.ExpandToOneRingNeighbours();
remesh_roi.ExpandToOneRingNeighbours();
remesh_roi.LocalOptimize(true, true);
int[] new_roi = remesh_roi.ToArray();
// get rid of extrude group
FaceGroupUtil.SetGroupToGroup(Mesh, extrude_group, 0);
/* clean up via remesh
* - constrain loop we filled to itself
*/
RegionRemesher r = new RegionRemesher(Mesh, new_roi);
DCurve3 top_curve = MeshUtil.ExtractLoopV(Mesh, extrude.NewLoop.Vertices);
DCurveProjectionTarget curve_target = new DCurveProjectionTarget(top_curve);
int[] top_loop = (int[])extrude.NewLoop.Vertices.Clone();
r.Region.MapVerticesToSubmesh(top_loop);
MeshConstraintUtil.ConstrainVtxLoopTo(r.Constraints, r.Mesh, top_loop, curve_target);
DMeshAABBTree3 spatial = new DMeshAABBTree3(Mesh);
spatial.Build();
MeshProjectionTarget target = new MeshProjectionTarget(Mesh, spatial);
r.SetProjectionTarget(target);
bool bRemesh = true;
if (bRemesh)
{
r.Precompute();
r.EnableFlips = r.EnableSplits = r.EnableCollapses = true;
r.MinEdgeLength = target_edge_len;
r.MaxEdgeLength = 2 * target_edge_len;
r.EnableSmoothing = true;
r.SmoothSpeedT = 1.0f;
for (int k = 0; k < 40; ++k)
{
r.BasicRemeshPass();
}
r.SetProjectionTarget(null);
r.SmoothSpeedT = 0.25f;
for (int k = 0; k < 10; ++k)
{
r.BasicRemeshPass();
}
Debug.Assert(Mesh.CheckValidity());
r.BackPropropagate();
}
// smooth around the join region to clean up ugliness
smooth_region(Mesh, r.Region.BaseBorderV, 3);
}