private static bool GenerateShaderPassLit(StackLitMasterNode masterNode, Pass pass, GenerationMode mode, ShaderGenerator result, List <string> sourceAssetDependencyPaths)
{
if (mode == GenerationMode.ForReals || pass.UseInPreview)
{
pass.OnGeneratePass(masterNode);
// apply master node options to active fields
HashSet <string> activeFields = GetActiveFieldsFromMasterNode(masterNode, pass);
// use standard shader pass generation
bool vertexActive = masterNode.IsSlotConnected(StackLitMasterNode.PositionSlotId);
return(HDSubShaderUtilities.GenerateShaderPass(masterNode, pass, mode, activeFields, result, sourceAssetDependencyPaths, vertexActive));
}
else
{
return(false);
}
}
private static bool GenerateShaderPassLit(StackLitMasterNode masterNode, Pass pass, GenerationMode mode, ShaderGenerator result, List <string> sourceAssetDependencyPaths)
{
if (mode == GenerationMode.ForReals || pass.UseInPreview)
{
SurfaceMaterialOptions materialOptions = HDSubShaderUtilities.BuildMaterialOptions(masterNode.surfaceType, masterNode.alphaMode, masterNode.doubleSidedMode != DoubleSidedMode.Disabled, refraction: false);
pass.OnGeneratePass(masterNode);
// apply master node options to active fields
HashSet <string> activeFields = GetActiveFieldsFromMasterNode(masterNode, pass);
// use standard shader pass generation
bool vertexActive = masterNode.IsSlotConnected(StackLitMasterNode.PositionSlotId);
return(HDSubShaderUtilities.GenerateShaderPass(masterNode, pass, mode, materialOptions, activeFields, result, sourceAssetDependencyPaths, vertexActive));
}
else
{
return(false);
}
}
private static void AddPixelShaderSlotsForWriteNormalBufferPasses(StackLitMasterNode masterNode, ref Pass pass)
{
// See StackLit.hlsl:ConvertSurfaceDataToNormalData()
// Note: We remove the slots we're adding as the editor will constantly regenerate the shader but
// without recreating the nodes thus the passes in the subshader object.
if (masterNode.coat.isOn)
{
// Check ConvertSurfaceDataToNormalData, in this case, we only need those:
pass.PixelShaderSlots.Remove(StackLitMasterNode.CoatSmoothnessSlotId);
pass.PixelShaderSlots.Add(StackLitMasterNode.CoatSmoothnessSlotId);
pass.PixelShaderSlots.Remove(StackLitMasterNode.CoatNormalSlotId);
pass.PixelShaderSlots.Add(StackLitMasterNode.CoatNormalSlotId);
}
else
{
pass.PixelShaderSlots.Remove(StackLitMasterNode.NormalSlotId);
pass.PixelShaderSlots.Add(StackLitMasterNode.NormalSlotId);
pass.PixelShaderSlots.Remove(StackLitMasterNode.LobeMixSlotId);
pass.PixelShaderSlots.Add(StackLitMasterNode.LobeMixSlotId);
pass.PixelShaderSlots.Remove(StackLitMasterNode.SmoothnessASlotId);
pass.PixelShaderSlots.Add(StackLitMasterNode.SmoothnessASlotId);
pass.PixelShaderSlots.Remove(StackLitMasterNode.SmoothnessBSlotId);
pass.PixelShaderSlots.Add(StackLitMasterNode.SmoothnessBSlotId);
}
// Also, when geometricSpecularAA.isOn, might want to add SpecularAAScreenSpaceVarianceSlotId and SpecularAAThresholdSlotId,
// since they affect smoothnesses in surfaceData directly. This is an implicit behavior for Lit, via the GBuffer pass.
// Versus performance, might not be important for what it is used for, but SSR uses the roughness too so for now,
// add them.
if (masterNode.geometricSpecularAA.isOn) // TODOTODO || Normal Map Filtering is on
{
pass.PixelShaderSlots.Remove(StackLitMasterNode.SpecularAAScreenSpaceVarianceSlotId);
pass.PixelShaderSlots.Add(StackLitMasterNode.SpecularAAScreenSpaceVarianceSlotId);
pass.PixelShaderSlots.Remove(StackLitMasterNode.SpecularAAThresholdSlotId);
pass.PixelShaderSlots.Add(StackLitMasterNode.SpecularAAThresholdSlotId);
}
}
//
// Reference for GetActiveFieldsFromMasterNode
// -------------------------------------------
//
// Properties (enables etc):
//
// ok+MFD -> material feature define: means we need a predicate, because we will transform it into a #define that match the material feature, shader_feature-defined, that the rest of the shader code uses.
//
// ok+MFD masterNode.baseParametrization --> even though we can just always transfer present fields (check with $SurfaceDescription.*) like specularcolor and metallic,
// we need to translate this into the _MATERIAL_FEATURE_SPECULAR_COLOR define.
//
// ok masterNode.energyConservingSpecular
//
// ~~~~ ok+MFD: these are almost all material features:
// masterNode.anisotropy
// masterNode.coat
// masterNode.coatNormal
// masterNode.dualSpecularLobe
// masterNode.dualSpecularLobeParametrization
// masterNode.capHazinessWrtMetallic -> not a material feature define, as such, we will create a combined predicate for the HazyGlossMaxDielectricF0 slot dependency
// instead of adding a #define in the template...
// masterNode.iridescence
// masterNode.subsurfaceScattering
// masterNode.transmission
//
// ~~~~ ...ok+MFD: these are all material features
//
// ok masterNode.receiveDecals
// ok masterNode.receiveSSR
// ok masterNode.geometricSpecularAA --> check, a way to combine predicates and/or exclude passes: TODOTODO What about WRITE_NORMAL_BUFFER passes ? (ie smoothness)
// ok masterNode.specularOcclusion --> no use for it though! see comments.
//
// ~~~~ ok+D: these require translation to defines also...
//
// masterNode.anisotropyForAreaLights
// masterNode.recomputeStackPerLight
// masterNode.shadeBaseUsingRefractedAngles
// masterNode.debug
// Inputs: Most inputs don't need a specific predicate in addition to the "present field predicate", ie the $SurfaceDescription.*,
// but in some special cases we check connectivity to avoid processing the default value for nothing...
// (see specular occlusion with _MASKMAP and _BENTNORMALMAP in LitData, or _TANGENTMAP, _BENTNORMALMAP, etc. which act a bit like that
// although they also avoid sampling in that case, but default tiny texture map sampling isn't a big hit since they are all cached once
// a default "unityTexWhite" is sampled, it is cached for everyone defaulting to white...)
//
// ok+ means there's a specific additional predicate
//
// ok masterNode.BaseColorSlotId
// ok masterNode.NormalSlotId
//
// ok+ masterNode.BentNormalSlotId --> Dependency of the predicate on IsSlotConnected avoids processing even if the slots
// ok+ masterNode.TangentSlotId are always there so any pass that declares its use in PixelShaderSlots will have the field in SurfaceDescription,
// but it's not necessarily useful (if slot isnt connected, waste processing on potentially static expressions if
// shader compiler cant optimize...and even then, useless to have static override value for those.)
//
// TODOTODO: Note you could have the same argument for NormalSlot (which we dont exclude with a predicate).
// Also and anyways, the compiler is smart enough not to do the TS to WS matrix multiply on a (0,0,1) vector.
//
// ok+ masterNode.CoatNormalSlotId -> we already have a "material feature" coat normal map so can use that instead, although using that former, we assume the coat normal slot
// will be there, but it's ok, we can #ifdef the code on the material feature define, and use the $SurfaceDescription.CoatNormal predicate
// for the actual assignment,
// although for that one we could again
// use the "connected" condition like for tangent and bentnormal
//
// The following are all ok, no need beyond present field predicate, ie $SurfaceDescription.*,
// except special cases where noted
//
// ok masterNode.SubsurfaceMaskSlotId
// ok masterNode.ThicknessSlotId
// ok masterNode.DiffusionProfileHashSlotId
// ok masterNode.IridescenceMaskSlotId
// ok masterNode.IridescenceThicknessSlotId
// ok masterNode.SpecularColorSlotId
// ok masterNode.DielectricIorSlotId
// ok masterNode.MetallicSlotId
// ok masterNode.EmissionSlotId
// ok masterNode.SmoothnessASlotId
// ok masterNode.SmoothnessBSlotId
// ok+ masterNode.AmbientOcclusionSlotId -> defined a specific predicate, but not used, see StackLitData.
// ok masterNode.AlphaSlotId
// ok masterNode.AlphaClipThresholdSlotId
// ok masterNode.AnisotropyASlotId
// ok masterNode.AnisotropyBSlotId
// ok masterNode.SpecularAAScreenSpaceVarianceSlotId
// ok masterNode.SpecularAAThresholdSlotId
// ok masterNode.CoatSmoothnessSlotId
// ok masterNode.CoatIorSlotId
// ok masterNode.CoatThicknessSlotId
// ok masterNode.CoatExtinctionSlotId
// ok masterNode.LobeMixSlotId
// ok masterNode.HazinessSlotId
// ok masterNode.HazeExtentSlotId
// ok masterNode.HazyGlossMaxDielectricF0SlotId -> No need for a predicate, the needed predicate is the combined (capHazinessWrtMetallic + HazyGlossMaxDielectricF0)
// "leaking case": if the 2 are true, but we're not in metallic mode, the capHazinessWrtMetallic property is wrong,
// that means the master node is really misconfigured, spew an error, should never happen...
// If it happens, it's because we forgot UpdateNodeAfterDeserialization() call when modifying the capHazinessWrtMetallic or baseParametrization
// properties, maybe through debug etc.
//
// ok masterNode.DistortionSlotId -> Warning: peculiarly, instead of using $SurfaceDescription.Distortion and DistortionBlur,
// ok masterNode.DistortionBlurSlotId we do an #if (SHADERPASS == SHADERPASS_DISTORTION) in the template, instead of
// relying on other passed NOT to include the DistortionSlotId in their PixelShaderSlots!!
// Other to deal with, and
// Common between Lit and StackLit:
//
// doubleSidedMode, alphaTest, receiveDecals,
// surfaceType, alphaMode, blendPreserveSpecular, transparencyFog,
// distortion, distortionMode, distortionDepthTest,
// sortPriority (int)
// geometricSpecularAA, energyConservingSpecular, specularOcclusion
//
private static HashSet <string> GetActiveFieldsFromMasterNode(AbstractMaterialNode iMasterNode, Pass pass)
{
HashSet <string> activeFields = new HashSet <string>();
StackLitMasterNode masterNode = iMasterNode as StackLitMasterNode;
if (masterNode == null)
{
return(activeFields);
}
if (masterNode.doubleSidedMode != DoubleSidedMode.Disabled)
{
activeFields.Add("DoubleSided");
if (pass.ShaderPassName != "SHADERPASS_VELOCITY") // HACK to get around lack of a good interpolator dependency system
{ // we need to be able to build interpolators using multiple input structs
// also: should only require isFrontFace if Normals are required...
if (masterNode.doubleSidedMode == DoubleSidedMode.FlippedNormals)
{
activeFields.Add("DoubleSided.Flip");
}
else if (masterNode.doubleSidedMode == DoubleSidedMode.MirroredNormals)
{
activeFields.Add("DoubleSided.Mirror");
}
// Important: the following is used in SharedCode.template.hlsl for determining the normal flip mode
activeFields.Add("FragInputs.isFrontFace");
}
}
if (masterNode.alphaTest.isOn)
{
if (pass.PixelShaderUsesSlot(StackLitMasterNode.AlphaClipThresholdSlotId))
{
activeFields.Add("AlphaTest");
}
}
if (masterNode.surfaceType != SurfaceType.Opaque)
{
activeFields.Add("SurfaceType.Transparent");
if (masterNode.alphaMode == AlphaMode.Alpha)
{
activeFields.Add("BlendMode.Alpha");
}
else if (masterNode.alphaMode == AlphaMode.Premultiply)
{
activeFields.Add("BlendMode.Premultiply");
}
else if (masterNode.alphaMode == AlphaMode.Additive)
{
activeFields.Add("BlendMode.Add");
}
if (masterNode.blendPreserveSpecular.isOn)
{
activeFields.Add("BlendMode.PreserveSpecular");
}
if (masterNode.transparencyFog.isOn)
{
activeFields.Add("AlphaFog");
}
}
//
// Predicates to change into defines:
//
// Even though we can just always transfer the present (check with $SurfaceDescription.*) fields like specularcolor
// and metallic, we still need to know the baseParametrization in the template to translate into the
// _MATERIAL_FEATURE_SPECULAR_COLOR define:
if (masterNode.baseParametrization == StackLit.BaseParametrization.SpecularColor)
{
activeFields.Add("BaseParametrization.SpecularColor");
}
if (masterNode.energyConservingSpecular.isOn) // No defines, suboption of BaseParametrization.SpecularColor
{
activeFields.Add("EnergyConservingSpecular");
}
if (masterNode.anisotropy.isOn)
{
activeFields.Add("Material.Anisotropy");
}
if (masterNode.coat.isOn)
{
activeFields.Add("Material.Coat");
}
if (masterNode.coatNormal.isOn)
{
activeFields.Add("Material.CoatNormal");
}
if (masterNode.dualSpecularLobe.isOn)
{
activeFields.Add("Material.DualSpecularLobe");
if (masterNode.dualSpecularLobeParametrization == StackLit.DualSpecularLobeParametrization.HazyGloss)
{
activeFields.Add("DualSpecularLobeParametrization.HazyGloss");
// Option for baseParametrization == Metallic && DualSpecularLobeParametrization == HazyGloss:
if (masterNode.capHazinessWrtMetallic.isOn && pass.PixelShaderUsesSlot(StackLitMasterNode.HazyGlossMaxDielectricF0SlotId))
{
// check the supporting slot is there (although masternode should deal with having a consistent property config)
var maxDielectricF0Slot = masterNode.FindSlot <Vector1MaterialSlot>(StackLitMasterNode.HazyGlossMaxDielectricF0SlotId);
if (maxDielectricF0Slot != null)
{
// Again we assume masternode has HazyGlossMaxDielectricF0 which should always be the case
// if capHazinessWrtMetallic.isOn.
activeFields.Add("CapHazinessIfNotMetallic");
}
}
}
}
if (masterNode.iridescence.isOn)
{
activeFields.Add("Material.Iridescence");
}
if (masterNode.subsurfaceScattering.isOn && masterNode.surfaceType != SurfaceType.Transparent)
{
activeFields.Add("Material.SubsurfaceScattering");
}
if (masterNode.transmission.isOn)
{
activeFields.Add("Material.Transmission");
}
// Advanced:
if (masterNode.anisotropyForAreaLights.isOn)
{
activeFields.Add("AnisotropyForAreaLights");
}
if (masterNode.recomputeStackPerLight.isOn)
{
activeFields.Add("RecomputeStackPerLight");
}
if (masterNode.shadeBaseUsingRefractedAngles.isOn)
{
activeFields.Add("ShadeBaseUsingRefractedAngles");
}
if (masterNode.debug.isOn)
{
activeFields.Add("StackLitDebug");
}
//
// Other property predicates:
//
if (!masterNode.receiveDecals.isOn)
{
activeFields.Add("DisableDecals");
}
if (!masterNode.receiveSSR.isOn)
{
activeFields.Add("DisableSSR");
}
// Note here we combine an "enable"-like predicate and the $SurfaceDescription.(slotname) predicate
// into a single $GeometricSpecularAA pedicate.
//
// ($SurfaceDescription.* predicates are useful to make sure the field is present in the struct in the template.
// The field will be present if both the master node and pass have the slotid, see this set intersection we make
// in GenerateSurfaceDescriptionStruct(), with HDSubShaderUtilities.FindMaterialSlotsOnNode().)
//
// Normally, since the feature enable adds the required slots, only the $SurfaceDescription.* would be required,
// but some passes might not need it and not declare the PixelShaderSlot, or, inversely, the pass might not
// declare it as a way to avoid it.
//
// IE this has also the side effect to disable geometricSpecularAA - even if "on" - for passes that don't explicitly
// advertise these slots(eg for a general feature, with separate "enable" and "field present" predicates, the
// template could take a default value and process it anyway if a feature is "on").
//
// (Note we can achieve the same results in the template on just single predicates by making defines out of them,
// and using #if defined() && etc)
bool haveSomeSpecularAA = false; // TODOTODO in prevision of normal texture filtering
if (masterNode.geometricSpecularAA.isOn &&
pass.PixelShaderUsesSlot(StackLitMasterNode.SpecularAAThresholdSlotId) &&
pass.PixelShaderUsesSlot(StackLitMasterNode.SpecularAAScreenSpaceVarianceSlotId))
{
haveSomeSpecularAA = true;
activeFields.Add("GeometricSpecularAA");
}
if (haveSomeSpecularAA)
{
activeFields.Add("SpecularAA");
}
if (masterNode.specularOcclusion.isOn)
{
// We don't optimize based eg on baked ambient occlusion missing a texture, this makes this baked, data-based
// SpecularOcclusion a waste (non baked, SSAO-based SpecularOcclusion is always applied with the TriACE trick),
// but the user should know better.
// TODOTODO: rename the UI to "baked specular occlusion" and "baked AO" ?
activeFields.Add("SpecularOcclusion");
}
//
// Input special-casing predicates:
//
if (masterNode.IsSlotConnected(StackLitMasterNode.BentNormalSlotId) && pass.PixelShaderUsesSlot(StackLitMasterNode.BentNormalSlotId))
{
activeFields.Add("BentNormal");
}
if (masterNode.IsSlotConnected(StackLitMasterNode.TangentSlotId) && pass.PixelShaderUsesSlot(StackLitMasterNode.TangentSlotId))
{
activeFields.Add("Tangent");
}
// The following idiom enables an optimization on feature ports that don't have an enable switch in the settings
// view, where the default value might not produce a visual result and incur a processing cost we want to avoid.
// For ambient occlusion, this is the case for the SpecularOcclusion calculations which also depend on it,
// where a value of 1 will produce no results.
// See SpecularOcclusion, we don't optimize out this case...
if (pass.PixelShaderUsesSlot(StackLitMasterNode.AmbientOcclusionSlotId))
{
bool connected = masterNode.IsSlotConnected(StackLitMasterNode.AmbientOcclusionSlotId);
var ambientOcclusionSlot = masterNode.FindSlot <Vector1MaterialSlot>(StackLitMasterNode.AmbientOcclusionSlotId);
// master node always has it, assert ambientOcclusionSlot != null
if (connected || ambientOcclusionSlot.value != ambientOcclusionSlot.defaultValue)
{
activeFields.Add("AmbientOcclusion");
}
}
if (masterNode.IsSlotConnected(StackLitMasterNode.CoatNormalSlotId) && pass.PixelShaderUsesSlot(StackLitMasterNode.CoatNormalSlotId))
{
activeFields.Add("CoatNormal");
}
if (masterNode.IsSlotConnected(StackLitMasterNode.LightingSlotId) && pass.PixelShaderUsesSlot(StackLitMasterNode.LightingSlotId))
{
activeFields.Add("LightingGI");
}
if (masterNode.IsSlotConnected(StackLitMasterNode.BackLightingSlotId) && pass.PixelShaderUsesSlot(StackLitMasterNode.BackLightingSlotId))
{
activeFields.Add("BackLightingGI");
}
return(activeFields);
}