private void cmdSendData_Click(object eventSender, System.EventArgs eventArgs)
{
// Parameters:
// LowChan :the lower channel of the scan
// HighChan :the upper channel of the scan
// NumPoints :the number of D/A values to send
// Rate :per channel sampling rate ((samples per second) per channel)
// DAData :array of values to send to the scanned channels
// Options :data send options
FirstPoint = 0;
int Rate = 100; // Rate of data update (ignored if board does not
// support timed analog output)
MccDaq.ScanOptions Options = MccDaq.ScanOptions.Default; // foreground mode scan
MccDaq.ErrorInfo ULStat = DaqBoard.AOutScan
(LowChan, HighChan, NumPoints, ref Rate, Range, MemHandle, Options);
float VoltValue;
for (int i = 0; i < NumPoints; ++i)
{
lblAOutData[i].Text = DAData[i].ToString("0");
VoltValue = ConvertToVolts(DAData[i]);
lblAOutVolts[i].Text = VoltValue.ToString("0.000V");
}
for (int i = HighChan + 1; i <= 3; i++)
{
lblAOutData[i].Text = "";
}
}
private void optDefault_CheckedChanged(object eventSender, System.EventArgs eventArgs) /* Handles optDefault.CheckedChanged */
{
if (optDefault.Checked)
{
Options = MccDaq.ScanOptions.ConvertData;
}
}
private int MemHandle = 0; // define a variable to contain the handle for
// memory allocated by Windows through MccDaq.MccServices.WinBufAlloc()
public frmDataDisplay()
{
// This call is required by the Windows Form Designer.
InitializeComponent();
// Initiate error handling
// activating error handling will trap errors like
// bad channel numbers and non-configured conditions.
// Parameters:
// MccDaq.ErrorReporting.PrintAll :all warnings and errors encountered will be printed
// MccDaq.ErrorHandling.StopAll :if an error is encountered, the program will stop
MccDaq.ErrorInfo ULStat = MccDaq.MccService.ErrHandling(MccDaq.ErrorReporting.PrintAll, MccDaq.ErrorHandling.StopAll);
// Create a new MccBoard object for Board 0
DaqBoard = new MccDaq.MccBoard(0);
// set aside memory to hold data
MemHandle = MccDaq.MccService.WinBufAlloc(NumPoints);
Options = MccDaq.ScanOptions.ConvertData;
lblADData = (new Label[] { _lblADData_0, _lblADData_1, _lblADData_2, _lblADData_3,
_lblADData_4, _lblADData_5, _lblADData_6, _lblADData_7 });
}
private void tmrConvert_Tick(object eventSender, System.EventArgs eventArgs) /* Handles tmrConvert.Tick */
{
tmrConvert.Stop();
// Collect the values by calling MccDaq.MccBoard.AInScan function
// Parameters:
// LowChan :the first channel of the scan
// HighChan :the last channel of the scan
// Count :the total number of A/D samples to collect
// Rate :sample rate
// Range :the range for the board
// MemHandle :Handle for Windows buffer to store data in
// Options :data collection options
int LowChan = 0; // first channel to acquire
HighChan = int.Parse(txtHighChan.Text); // last channel to acquire
if (HighChan > 7)
{
HighChan = 7;
}
txtHighChan.Text = HighChan.ToString();
int Count = NumPoints; // total number of data points to collect
int Rate = 100; // sampling rate is ignored
MccDaq.Range Range = MccDaq.Range.Bip5Volts; // set the range
MccDaq.ScanOptions Options = MccDaq.ScanOptions.ConvertData
| MccDaq.ScanOptions.ExtClock;
MccDaq.ErrorInfo ULStat = DaqBoard.AInScan(LowChan, HighChan, Count, ref Rate, Range, MemHandle, Options);
// Transfer the data from the memory buffer set up by Windows to an array
if (HighResAD)
{
ULStat = MccDaq.MccService.WinBufToArray32(MemHandle, ADData32, FirstPoint, Count);
for (int i = 0; i <= HighChan; ++i)
{
lblADData[i].Text = ADData32[i].ToString("0");
}
}
else
{
ULStat = MccDaq.MccService.WinBufToArray(MemHandle, ADData, FirstPoint, Count);
for (int i = 0; i <= HighChan; ++i)
{
lblADData[i].Text = ADData[i].ToString("0");
}
}
for (int j = HighChan + 1; j <= 7; ++j)
{
lblADData[j].Text = ("");
}
tmrConvert.Start();
}
private void optModeSing_CheckedChanged(object eventSender, System.EventArgs eventArgs) /* Handles optModeSing.CheckedChanged */
{
if (optModeSing.Checked)
{
Options = MccDaq.ScanOptions.ConvertData
| MccDaq.ScanOptions.SingleIo;
}
}
public Form1()
{
oThread = new Thread(new ThreadStart(CountMeas));
InitializeComponent();
chart1.ChartAreas[0].AxisY.Maximum = 3;
chart1.ChartAreas[0].AxisY.Minimum = 2;
ADData = new ushort[NumPoints];
MemHandle = MccDaq.MccService.WinBufAllocEx(NumPoints);
//Options = MccDaq.ScanOptions.ConvertData;
Options = MccDaq.ScanOptions.BurstIo;
}
public double[] ReadDyno()
{
//establish all the varables for the data
double[] reading = new double[7];
double XForce, YForce, ZForceDyno, TForce, VAngle, XYForce, XYForceAverage;
//sampleing from all 8 channels, DAQ has a max sampling rate of 10,000Hz so for sampleing 8 channels the rate=10,000/8=1,250
int LowChan = 0, HighChan = 7, Rate = 1250, Count = 8;//JNEW
//IntPtr MemHandle = IntPtr.Zero;//JNEW //dont think this is needed here
int NumPoints = 8; // Number of data points to collect //JNEW
int FirstPoint = 0; // set first element in buffer to transfer to array //JNEW
short[] ADData = new short[NumPoints]; //JNEW
IntPtr MemHandle = MccDaq.MccService.ScaledWinBufAllocEx(NumPoints); //JNEW
// return scaled data (dont know exactly what this means)
Options = MccDaq.ScanOptions.ConvertData | MccDaq.ScanOptions.SingleIo;
//Options = MccDaq.ScanOptions.ScaleData;
//Range = MccDaq.Range.Bip5Volts; // set the range
//Range = MccDaq.Range.Bip10Volts; // set the range
ULStat = DaqBoard.AInScan(LowChan, HighChan, Count, ref Rate, Range, MemHandle, Options);
if (ULStat.Value == MccDaq.ErrorInfo.ErrorCode.BadRange)
{
Console.WriteLine("Change the Range argument to one supported by this board.");
}
// Transfer the data from the memory buffer set up by Windows to an array
ULStat = MccDaq.MccService.WinBufToArray(MemHandle, ADData, FirstPoint, Count);
//calibration variables (probably from kistler)
//Copy into local variables
XForce = 487.33 * Count2Volt(ADData[0]);
YForce = 479.85 * Count2Volt(ADData[1]);
ZForceDyno = 2032.52 * Count2Volt(ADData[2]);
TForce = 18.91 * Count2Volt(ADData[3]);
VAngle = Count2Volt(ADData[7]);
XYForce = Math.Sqrt(XForce * XForce + YForce * YForce);
XYForceAverage = averager.calculateAverage(XYForce);
reading[0] = XForce;
reading[1] = YForce;
reading[2] = ZForceDyno;
reading[3] = TForce;
reading[4] = VAngle;
reading[5] = XYForce;
reading[6] = XYForceAverage;
return(reading);
}
//constuctor for the dyno
public Dyno()
{
isDynCon = false;
//Initialize Error Handling
ULStat = MccDaq.MccService.ErrHandling(MccDaq.ErrorReporting.PrintAll, MccDaq.ErrorHandling.StopAll);
//Create an object for board 0
DaqBoard = new MccDaq.MccBoard(0);
//Set the range
Range = MccDaq.Range.Bip10Volts;
// return scaled data
Options = MccDaq.ScanOptions.ScaleData;
// creating and defining the objects for the moving average
filterLength = 5;
averager = new MovingAverage(filterLength);
XForce = 0;
YForce = 0;
ZForceDyno = 0;
TForce = 0;
VAngle = 0;
XYForce = 0;
XYForceAverage = 0;
// Try to initialize the dyno control port and catch any errors
try
{
//Set up port for controlling the dyno
DynoControlPort = new SerialPort();
DynoControlPort.PortName = "COM3";
DynoControlPort.BaudRate = 4800;
DynoControlPort.Parity = Parity.None;
DynoControlPort.StopBits = StopBits.One;
DynoControlPort.DataBits = 8;
DynoControlPort.Open();
}
catch (System.IO.IOException e)
{
//MessageBox.Show("Open device manager in windows and the 'Setup Serial Ports' section of the C# code and check the serial port names and settings are correct\n\n" + e.ToString(), "Serial Port Error");
//Process.GetCurrentProcess().Kill();
}
catch (System.UnauthorizedAccessException e)
{
//MessageBox.Show("Something is wrong? maybe try to restart computer?\n\nHere is some error message stuff...\n\n" + e.ToString(), "Serial Port Error");
//Process.GetCurrentProcess().Kill();
}
}
private IntPtr MemHandle = IntPtr.Zero; // define a variable to contain the handle for
// memory allocated by Windows through MccDaq.MccServices.WinBufAlloc()
public frmDataDisplay()
{
// This call is required by the Windows Form Designer.
InitializeComponent();
// Initiate error handling
// activating error handling will trap errors like
// bad channel numbers and non-configured conditions.
// Parameters:
// MccDaq.ErrorReporting.PrintAll :all warnings and errors encountered will be printed
// MccDaq.ErrorHandling.StopAll :if an error is encountered, the program will stop
MccDaq.ErrorInfo ULStat = MccDaq.MccService.ErrHandling(MccDaq.ErrorReporting.PrintAll, MccDaq.ErrorHandling.StopAll);
// Create a new MccBoard object for Board 0
DaqBoard = new MccDaq.MccBoard(0);
// Get the resolution of A/D
int ADRes;
DaqBoard.BoardConfig.GetAdResolution(out ADRes);
// check If the resolution of A/D is higher than 16 bit.
// If it is, then the A/D is high resolution.
if (ADRes > 16)
{
HighResAD = true;
}
// set aside memory to hold data
if (HighResAD)
{
MemHandle = MccDaq.MccService.WinBufAlloc32Ex(NumPoints);
}
else
{
MemHandle = MccDaq.MccService.WinBufAllocEx(NumPoints);
}
Options = MccDaq.ScanOptions.ConvertData;
lblADData = (new Label[] { _lblADData_0, _lblADData_1, _lblADData_2, _lblADData_3,
_lblADData_4, _lblADData_5, _lblADData_6, _lblADData_7 });
}
private void cmdReadDIn_Click(object eventSender, System.EventArgs eventArgs) /* Handles cmdReadDIn.Click */
{
// read the digital input and display
// Parameters:
// PortNum :the input port
// Count :number of times to read digital input
// Rate :sample rate in samples/second
// DataBuffer() :the array for the digital input values read from the port
// Options :data collection options
Count = NumPoints;
int Rate = 100;
MccDaq.ScanOptions Options = MccDaq.ScanOptions.WordXfer
| MccDaq.ScanOptions.Background;
MccDaq.ErrorInfo ULStat = DaqBoard.DInScan(PortNum, Count, ref Rate, MemHandle, Options);
tmrCheckStatus.Enabled = true;
}
private void cmdSendData_Click(object eventSender, System.EventArgs eventArgs) /* Handles cmdSendData.Click */
{
// Parameters:
// LowChan :the lower channel of the scan
// HighChan :the upper channel of the scan
// Count :the number of D/A values to send
// Rate :per channel sampling rate ((samples per second) per channel)
// DAData :array of values to send to the scanned channels
// Options :data send options
FirstPoint = 0;
int LowChan = 0; // First analog output channel
int HighChan = 1; // Last analog output channel
int Rate = 100; // Rate of data update (ignored if board does not support timed analog output)
MccDaq.Range Gain = MccDaq.Range.Bip5Volts; // Ignored if gain is not programmable
MccDaq.ScanOptions Options = MccDaq.ScanOptions.Default; // foreground mode scan
MccDaq.ErrorInfo ULStat = DaqBoard.AOutScan(LowChan, HighChan, Count, ref Rate, Gain, MemHandle, Options);
for (int i = 0; i <= NumPoints - 1; ++i)
{
lblAOutData[i].Text = DAData[i].ToString("0");
}
}
/* Handles optDefault.CheckedChanged */
private void optDefault_CheckedChanged(object eventSender, System.EventArgs eventArgs)
{
if (optDefault.Checked)
Options = MccDaq.ScanOptions.ConvertData;
}
/* Handles optModeSing.CheckedChanged */
private void optModeSing_CheckedChanged(object eventSender, System.EventArgs eventArgs)
{
if (optModeSing.Checked)
Options = MccDaq.ScanOptions.ConvertData
| MccDaq.ScanOptions.SingleIo;
}
private void cmdStart_Click(object eventSender, System.EventArgs eventArgs) /* Handles cmdStart.Click */
{
cmdStart.Enabled = false;
// Select the trigger source using Mccdaq.MccBoard.SetTrigger()
// Parameters:
// TrigType :the type of triggering based on external trigger source
// LowThreshold :Low threshold when the trigger input is analog
// HighThreshold :High threshold when the trigger input is analog
float highVal = 1.0F;
MccDaq.Range Range = MccDaq.Range.Bip10Volts; // analog trigger range
ushort HighThreshold = 0;
MccDaq.ErrorInfo ULStat = DaqBoard.FromEngUnits(Range, highVal, out HighThreshold);
float lowVal = 0.1F;
ushort LowThreshold = 0;
ULStat = DaqBoard.FromEngUnits(Range, lowVal, out LowThreshold);
MccDaq.TriggerType TrigType = MccDaq.TriggerType.TrigAbove;
ULStat = DaqBoard.SetTrigger(TrigType, LowThreshold, HighThreshold);
if (ULStat.Value == MccDaq.ErrorInfo.ErrorCode.NoErrors)
{
// Collect the values with MccDaq.MccBoard.AInScan()
// Parameters:
// LowChan :the first channel of the scan
// HighChan :the last channel of the scan
// Count :the total number of A/D samples to collect
// Rate :sample rate
// Range :the range for the board
// MemHandle :Handle for Windows buffer to store data in
// Options :data collection options
int LowChan = 0; // first channel to acquire
HighChan = int.Parse(txtHighChan.Text); // last channel to acquire
if (HighChan > 7)
{
HighChan = 7;
}
txtHighChan.Text = HighChan.ToString();
int Count = NumPoints; // total number of data points to collect
int Rate = 390; // per channel sampling rate ((samples per second) per channel)
Range = MccDaq.Range.Bip5Volts; // set the range
MccDaq.ScanOptions Options = MccDaq.ScanOptions.ConvertData // return data as 12-bit values
| MccDaq.ScanOptions.ExtTrigger;
ULStat = DaqBoard.AInScan(LowChan, HighChan, Count, ref Rate, Range, MemHandle, Options);
if (ULStat.Value == MccDaq.ErrorInfo.ErrorCode.BadRange)
{
MessageBox.Show("Change the Range argument to one supported by this board.", "Unsupported Range", 0);
}
// Transfer the data from the memory buffer set up by Windows to an array
ULStat = MccDaq.MccService.WinBufToArray(MemHandle, out ADData[0], FirstPoint, Count);
for (int i = 0; i <= HighChan; ++i)
{
lblADData[i].Text = ADData[i].ToString("0");
}
for (int j = HighChan + 1; j <= 7; ++j)
{
lblADData[j].Text = "";
}
}
cmdStart.Enabled = true;
}
private MccDaq.ScanOptions Options; // define AInScan Options as Module level variable
#endregion Fields
#region Constructors
// memory allocated by Windows through MccDaq.MccServices.WinBufAlloc()
public frmDataDisplay()
{
// This call is required by the Windows Form Designer.
InitializeComponent();
// Initiate error handling
// activating error handling will trap errors like
// bad channel numbers and non-configured conditions.
// Parameters:
// MccDaq.ErrorReporting.PrintAll :all warnings and errors encountered will be printed
// MccDaq.ErrorHandling.StopAll :if an error is encountered, the program will stop
MccDaq.ErrorInfo ULStat = MccDaq.MccService.ErrHandling(MccDaq.ErrorReporting.PrintAll, MccDaq.ErrorHandling.StopAll);
// Create a new MccBoard object for Board 0
DaqBoard = new MccDaq.MccBoard(0);
// set aside memory to hold data
MemHandle = MccDaq.MccService.WinBufAlloc(NumPoints);
Options = MccDaq.ScanOptions.ConvertData;
lblADData = (new Label[]{_lblADData_0, _lblADData_1, _lblADData_2, _lblADData_3,
_lblADData_4, _lblADData_5, _lblADData_6, _lblADData_7});
}
private void cmdStartAcq_Click(object eventSender, System.EventArgs eventArgs)
{
cmdStartAcq.Enabled = false;
cmdStartAcq.Visible = false;
cmdStopConvert.Enabled = true;
cmdStopConvert.Visible = true;
// Parameters:
// LowChan :first A/D channel of the scan
// HighChan :last A/D channel of the scan
// Count :the total number of A/D samples to collect
// Rate :per channel sampling rate ((samples per second) per channel)
// Range :the gain for the board
// FileName :the filename for the collected data values
// Options :data collection options
int Count = NumPoints;
string FileName = txtFileName.Text; // a full path may be required here
int Rate = 1000;
int LowChan = 0;
int HighChan = 1;
MccDaq.ScanOptions Options = MccDaq.ScanOptions.Default;
string DataCount = NumPoints.ToString("0");
lblAcqStat.Text = "Collecting " + DataCount + " data points";
lblShowRate.Text = Rate.ToString("0");
lblShowLoChan.Text = LowChan.ToString("0");
lblShowHiChan.Text = HighChan.ToString("0");
lblShowOptions.Text = Enum.Format(Options.GetType(), Options, "d");
lblShowGain.Text = Range.ToString();
lblShowFile.Text = FileName;
lblShowCount.Text = Count.ToString("0");
lblShowPreTrig.Text = "Not Applicable";
Application.DoEvents();
// Collect the values with Collect the values by calling MccDaq.MccBoard.FileAInScan()
MccDaq.ErrorInfo ULStat = DaqBoard.FileAInScan
(LowChan, HighChan, Count, ref Rate, Range, FileName, Options);
if (ULStat.Value == MccDaq.ErrorInfo.ErrorCode.BadFileName)
{
MessageBox.Show(
"Enter the name of the file to create in text box.",
"Bad File Name", 0);
cmdStopConvert.Enabled = false;
cmdStopConvert.Visible = false;
cmdStartAcq.Enabled = true;
cmdStartAcq.Visible = true;
txtFileName.Focus();
return;
}
// show how many data points were collected
short FileLowChan;
short FileHighChan;
int TotalCount;
int PretrigCount;
ULStat = MccDaq.MccService.FileGetInfo
(FileName, out FileLowChan, out FileHighChan,
out PretrigCount, out TotalCount, out Rate, out Range);
lblReadRate.Text = Rate.ToString("0");
lblReadLoChan.Text = FileLowChan.ToString("0");
lblReadHiChan.Text = FileHighChan.ToString("0");
lblReadOptions.Text = Enum.Format(Options.GetType(), Options, "d");
lblReadGain.Text = Range.ToString();
lblReadFile.Text = FileName;
lblReadTotal.Text = TotalCount.ToString("0");
lblReadPreTrig.Text = PretrigCount.ToString("0");
}
private void cmdStart_Click(object eventSender, System.EventArgs eventArgs)
{
string TrigSource;
MccDaq.ErrorInfo ULStat;
MccDaq.TriggerType TrigType;
float LSB, VoltageRange;
int FSCounts, Rate;
bool ValidChan;
cmdStart.Enabled = false;
// Select the trigger source using Mccdaq.MccBoard.SetTrigger()
// Parameters:
// TrigType :the type of triggering based on external trigger source
// LowThreshold :Low threshold when the trigger input is analog
// HighThreshold :High threshold when the trigger input is analog
float highVal = 1.53F;
float lowVal = 0.1F;
TrigType = MccDaq.TriggerType.TrigAbove;
TrigSource = "analog trigger input";
ushort HighThreshold = 0;
ushort LowThreshold = 0;
if (AIOProps.ATrigRes == 0)
{
ULStat = DaqBoard.FromEngUnits(Range, highVal, out HighThreshold);
ULStat = DaqBoard.FromEngUnits(Range, lowVal, out LowThreshold);
}
else
{
//Use the value acquired from the AnalogIO module, since the resolution
//of the input is different from the resolution of the trigger.
//Calculate trigger based on resolution returned and trigger range.
VoltageRange = AIOProps.ATrigRange;
if (AIOProps.ATrigRange == -1)
{
VoltageRange = AIOProps.GetRangeVolts(Range);
TrigSource = "first channel in scan";
}
FSCounts = (int)Math.Pow(2, AIOProps.ATrigRes);
LSB = VoltageRange / FSCounts;
LowThreshold = (ushort)((lowVal / LSB) + (FSCounts / 2));
HighThreshold = (ushort)((highVal / LSB) + (FSCounts / 2));
}
lblInstruction.Text = "Board " + DaqBoard.BoardNum.ToString() +
" collecting analog data on up to " + NumAIChans.ToString() +
" channels using AInScan with Range set to " + Range.ToString() + ".";
lblResult.Text = "Waiting for a trigger at " + TrigSource + ". " +
"Trigger criterea: signal rising above " + highVal.ToString("0.00") +
"V. (Ctl-Break to abort.)";
Application.DoEvents();
ULStat = DaqBoard.SetTrigger(TrigType, LowThreshold, HighThreshold);
if (ULStat.Value == MccDaq.ErrorInfo.ErrorCode.NoErrors)
{
// Collect the values with MccDaq.MccBoard.AInScan()
// Parameters:
// LowChan :the first channel of the scan
// HighChan :the last channel of the scan
// Count :the total number of A/D samples to collect
// Rate :sample rate
// Range :the range for the board
// MemHandle :Handle for Windows buffer to store data in
// Options :data collection options
ValidChan = int.TryParse(txtHighChan.Text, out HighChan);
if (ValidChan)
{
if ((HighChan > MaxChan))
{
HighChan = MaxChan;
}
txtHighChan.Text = HighChan.ToString();
}
int Count = NumPoints; // total number of data points to collect
// per channel sampling rate ((samples per second) per channel)
Rate = 1000 / ((HighChan - LowChan) + 1);
MccDaq.ScanOptions Options = MccDaq.ScanOptions.ConvertData // return data as 12-bit values
| MccDaq.ScanOptions.ExtTrigger;
ULStat = DaqBoard.AInScan(LowChan, HighChan, Count, ref Rate, Range, MemHandle, Options);
lblResult.Text = "";
if (ULStat.Value == ErrorInfo.ErrorCode.Interrupted)
{
lblInstruction.Text = "Scan interrupted while waiting " +
"for trigger on board " + DaqBoard.BoardNum.ToString() +
". Click Start to try again.";
cmdStart.Enabled = true;
return;
}
else if (!(ULStat.Value == ErrorInfo.ErrorCode.NoErrors))
{
lblInstruction.Text = "Error occurred on board " +
DaqBoard.BoardNum.ToString() +
": " + ULStat.Message;
cmdStart.Enabled = false;
return;
}
// Transfer the data from the memory buffer set up by Windows to an array
if (ADResolution > 16)
{
ULStat = MccDaq.MccService.WinBufToArray32(MemHandle, ADData32, FirstPoint, Count);
for (int i = 0; i <= HighChan; ++i)
{
lblADData[i].Text = ADData32[i].ToString("0");
}
}
else
{
ULStat = MccDaq.MccService.WinBufToArray(MemHandle, ADData, FirstPoint, Count);
for (int i = 0; i <= HighChan; ++i)
{
lblADData[i].Text = ADData[i].ToString("0");
}
}
for (int j = HighChan + 1; j <= 7; ++j)
{
lblADData[j].Text = "";
}
}
cmdStart.Enabled = true;
}