/// <summary>
/// Taken a list of vectors 3 will find NW, NE, and SW and from there will create a new rectangle
/// Returns a rectangle in our system where North is on the higher Y value always
///
/// Y val flipped at the end
/// </summary>
public static Rect FromALotOfVertexToRect(List <Vector3> list)
{
List <float> xS = UList.ReturnAxisList(list, H.X);
List <float> zS = UList.ReturnAxisList(list, H.Z);
float minX = UMath.ReturnMinimum(xS);
float maxX = UMath.ReturnMax(xS);
float minZ = UMath.ReturnMinimum(zS);
float maxZ = UMath.ReturnMax(zS);
//Poly List that only need a valid NW, NE, and SW
Vector3 NW = new Vector3(minX, 0, maxZ);
Vector3 NE = new Vector3(maxX, 0, maxZ);
Vector3 SE = new Vector3(maxX, 0, minZ);
Vector3 SW = new Vector3(minX, 0, minZ);
List <Vector3> poly = new List <Vector3>()
{
NW, NE, SE, SW
};
//here i find the Rect from this poly and then
// I invert the Y of the recatangle... other wise this big rectangle
//is not overlapping anything will be far off in the Cordinates...
//Due to North(up) is bigger here say 100,, and South(down) less say 0 all this on World Z axis
//As long as MeshManager Hover Current Vertices is big as is its now 9 Lots (each lot 5x5 real polys)
//the Rect of the buildings will work flawlessly
return(U2D.ReturnRectYInverted(U2D.FromPolyToRect(poly)));
}
/// <summary>
/// Creates the air and ground parts and addToRegistro
/// </summary>
public void CreatePartsRoutine()
{
//creates parts above river
PlanesOnAirPos = ReturnPlanesOnAirPosAndDefinePlanesOnSoil();
PartsOnAir = ClassifyABridgeByParts(ReturnPlanesOnAirPosAndDefinePlanesOnSoil().Count);
createAirPartsNow = true;
//creates parts on gorund
//bz has duplicates// the big number is so close tiles dont have a part created
//only needed if is a road
if (HType.ToString().Contains("Road"))
{
PlanesOnSoil = EliminatesDuplicateDependingOnDominantSide(PlanesOnSoil);
}
//if is a trail...
else if (HType.ToString().Contains("Trail"))
{
PlanesOnSoil = UList.EliminateDuplicatesByDist(PlanesOnSoil, 0.01f);
}
//bz is not ordered. They need to be ordered to be clasified
PlanesOnSoil = OrderByXorZ(PlanesOnSoil);
PartsOnSoil = ClassifyShorePoints();
//must be called here... So still we are using the CurrentSpawnBuild obj
AddBridgeToRegistro();
}
/// <summary>
/// This are the vertices that create the marine bound
/// </summary>
private void FindVertexUnderNeathWater()
{
var yS = UList.FindYAxisCommonValues(m.AllVertexs, H.Descending);
float firstUnder = UList.FindFirstYBelow(yS, Program.gameScene.WaterBody.transform.position.y);
_marineBounds = UList.FindVectorsOnSameHeight(m.AllVertexs, firstUnder, 0.05f); //0.07f
_marineBounds = UList.EliminateDuplicatesByDist(_marineBounds, 0.3f); //0.2
float firstClos = UList.FindFirstYBelow(yS, m.IniTerr.MathCenter.y - 1f);
var closer = UList.FindVectorsOnSameHeight(m.AllVertexs, firstClos, 0.02f); //0.07f
closer = UList.EliminateDuplicatesByDist(closer, 0.3f); //0.2
_marineBounds.AddRange(closer);
float lowest = UMath.ReturnMinimumDifferentThanZero(yS) + 1f;
var low = UList.FindVectorsOnSameHeight(m.AllVertexs, lowest, 0.01f); //0.07f
low = UList.EliminateDuplicatesByDist(low, 0.4f); //0.2
_marineBounds.AddRange(low);
//RenderMarineBounds();
Debug.Log(_marineBounds.Count + " _marineBounds");
//AddMarinePositions();
DefineSeaPath(_marineBounds);
addMarine = true;
//AddMarineBoundsToCrystal();
}
//Returns first row list based on the rotation facer
private List <Vector3> ReturnFirstRow(List <Vector3> listSelected, int rotationFacer)
{
List <Vector3> res = new List <Vector3>();
if (rotationFacer == 0)
{
List <float> allZ = UList.ReturnAxisList(listSelected, H.Z);
float zMax = UMath.ReturnMax(allZ);
res = FirstRowLoop(listSelected, zMax, H.Z);
}
else if (rotationFacer == 1)
{
List <float> allX = UList.ReturnAxisList(listSelected, H.X);
float xMax = UMath.ReturnMax(allX);
res = FirstRowLoop(listSelected, xMax, H.X);
}
else if (rotationFacer == 2)
{
List <float> allZ = UList.ReturnAxisList(listSelected, H.Z);
float zMin = UMath.ReturnMinimum(allZ);
res = FirstRowLoop(listSelected, zMin, H.Z);
}
else if (rotationFacer == 3)
{
List <float> allX = UList.ReturnAxisList(listSelected, H.X);
float xMin = UMath.ReturnMinimum(allX);
res = FirstRowLoop(listSelected, xMin, H.X);
}
return(res);
}
public void FindVertexAboveTerrainLevel()
{
var yS = UList.FindYAxisCommonValues(m.AllVertexs, H.Ascending);
float firstAbove = UList.FindFirstYAbove(yS, m.IniTerr.MathCenter.y + 2f);
_mountainBounds = UList.FindVectorsOnSameHeight(m.AllVertexs, firstAbove, 0.07f);//0.07f
_mountainBounds = UList.EliminateDuplicatesByDist(_mountainBounds, 1f);
//a layer 2 toward the top
float lay2 = UList.FindFirstYAbove(yS, m.IniTerr.MathCenter.y + 3f);
var layer2 = UList.FindVectorsOnSameHeight(m.AllVertexs, lay2, 0.07f);//0.07f
layer2 = UList.EliminateDuplicatesByDist(layer2, 1f);
_mountainBounds.AddRange(layer2);
//a layer 3 toward the top
float lay3 = UList.FindFirstYAbove(yS, m.IniTerr.MathCenter.y + 4f);
var layer3 = UList.FindVectorsOnSameHeight(m.AllVertexs, lay3, 0.07f);//0.07f
layer3 = UList.EliminateDuplicatesByDist(layer3, 1f);
_mountainBounds.AddRange(layer3);
DefineMountPath(yS);
_mountainBounds.AddRange(_mountainPath);
Debug.Log("_mountainBounds count: " + _mountainPath.Count);
//bz was used by marine b4
Save();
addMount = true;
//RenderMountainBounds();
}
private void DefineMountPath(List <float> yS)
{
float highest = UMath.ReturnMax(yS);
_mountainPath = UList.FindVectorsOnSameHeight(m.AllVertexs, highest, 0.03f); //0.03f
_mountainPath = UList.EliminateDuplicatesByDist(_mountainPath, 0.4f); //0.2
}
void UpdateBigBoxesPrev()
{
InitializeBigBoxPrev();
float diffYVertic = UMath.ReturnDiffBetwMaxAndMin(_verticPathNew, H.Y);
float diffYHoriz = UMath.ReturnDiffBetwMaxAndMin(_horPathNew, H.Y);
float biggestDiff = UMath.ReturnMax(diffYVertic, diffYHoriz);
List <float> yS = UList.ReturnAxisList(_verticPathNew, H.Y);
yS.AddRange(UList.ReturnAxisList(_horPathNew, H.Y));
float maxY = UMath.ReturnMax(yS);
if (_dominantSide == H.Vertic)
{
var locVertBound = MakeListYVal(BoundsVertic, maxY);
verticBigBox.UpdatePos(locVertBound, biggestDiff + 0.5f);
verticBigBox.CheckAndSwitchColor(_isWayOK);
}
else if (_dominantSide == H.Horiz)
{
var locHorBound = MakeListYVal(BoundsHoriz, maxY);
horizBigBox.UpdatePos(locHorBound, biggestDiff + 0.5f);
horizBigBox.CheckAndSwitchColor(_isWayOK);
}
//this is for all but bridges and DraggableSquare. Dominant Side here is None
else if (_dominantSide == H.None && !HType.ToString().Contains("Bridge") && Category != Ca.DraggableSquare)
{
UpdateBigBoxesPrevForAllButBridges(maxY, biggestDiff);
}
TogglePrevBigBoxesVisible();
}
/// <summary>
/// If the minimun of the both path is higher than _minHeightToSpawn is true
/// </summary>
bool FindIFWayAboveWater()
{
bool res = false;
float minYVert = 0;
float minYHor = 0;
if (_verticPathNew.Count > 0)
{
var vertYs = UList.ReturnAxisList(_verticPathNew, H.Y);
minYVert = UMath.ReturnMinimum(vertYs);
if (minYVert > _minHeightToSpawn)
{
res = true;
}
}
if (_horPathNew.Count > 0)
{
var horYs = UList.ReturnAxisList(_horPathNew, H.Y);
minYHor = UMath.ReturnMinimum(horYs);
if (minYHor > _minHeightToSpawn)
{
res = true;
}
}
if (_verticPathNew.Count > 0 && _horPathNew.Count > 0)
{
var min = UMath.ReturnMinimum(minYVert, minYHor);
if (min > _minHeightToSpawn)
{
res = true;
}
}
return(res);
}
/// <summary>
/// Конструктор для класса, генерирующий
/// Def и Use цепочки по базовому блоку
/// </summary>
/// <param name="block">Базовый блок</param>
public DULists(BasicBlock block)
{
this.Block = block;
DList = new DList();
UList = new UList();
UListNotValid = new List <DUVar>();
BuildDULists();
}
public static List <Vector3> ReturnCurrentLotsVertex(List <int> currentIndexes, List <Lot> squares)
{
List <Vector3> vertexs = new List <Vector3>();
for (int i = 0; i < currentIndexes.Count; i++)
{
vertexs = UList.AddOneListToList(vertexs, squares[currentIndexes[i]].LotVertices);
}
return(vertexs);
}
public void RemoveBubble(UserControl userControl)
{
UList.Remove(userControl);
this.bubbleArea.Controls.Remove(userControl);
setHeight();
if (UList.Count == 0)
{
this.Dispose();
}
}
// Действие выхода приложения...
private void CloseWindowNow()
{
if (UpdateLinkStat == true)
{
UList.Abort();
}
Close();
Application.Exit(); // Чао!
}
private void DebugHere()
{
if (_eaten.Count == 4 && _currVector3s.Count == 12 && _debug.Count == 0)
{
ShowDebug(_currVector3s, Root.blueSphereHelp);
ShowDebug(_eaten, Root.yellowCube);
var cut = UList.ReturnTrunckedList(_grid, 500);
ShowDebug(cut, Root.blueCube);
}
}
/// <summary>
/// Scan Routine will add new lots to lots list from the result of ScanTerraRetLotVertex()
/// </summary>
/// <param name="inPolyDiv">how many div ex 5x5 a real poly will have</param>
/// <param name="polyX">real polys in X will cover in each scan pass</param>
/// <param name="polyZ">real polys in Z will cover in each scan pass</param>
private void ScanProcedure(int inPolyDiv, int polyX, int polyZ)
{
//return;
List <Vector3> newLotVertex = new List <Vector3>();
newLotVertex = ScanTerraRetLotVertex(inPolyDiv, polyX, polyZ);
Lots.Add(new Lot(newLotVertex, Lots.Count, lotStart, lotEnd));
//print("LotsScanned:" + Lots.Count);
AllVertexs = UList.AddOneListToList(AllVertexs, newLotVertex);
}
private void linkLabel1_LinkClicked(object sender, LinkLabelLinkClickedEventArgs e)
{
this.Text = "DNSBL Checker: Обновление списка серверов...";
this.ScanBtnStat = true;
this.AddressEdit.Enabled = false;
UpdateLink.Enabled = false;
UpdateLinkStat = true;
this.ScanBtn.Enabled = false;
this.UList = new Thread(UpdateServerList);
UList.Start();
}
/// <summary>
/// This eliminates duplicates of the bridge parts vectors3. Some pos are to close
/// based on dominant side this will elimitaes the duplicates taht are less than 5 times the subdive x or z - 0.01f
/// </summary>
private List <Vector3> EliminatesDuplicateDependingOnDominantSide(List <Vector3> list)
{
if (_dominantSide == H.Vertic)
{
return(UList.EliminateDuplicatesByDist(list, (Mathf.Abs(m.SubDivide.ZSubStep) * 5) - 0.01f));
}
if (_dominantSide == H.Horiz)
{
return(UList.EliminateDuplicatesByDist(list, (Mathf.Abs(m.SubDivide.XSubStep) * 5) - 0.01f));
}
return(null);
}
/// <summary>
/// Создает Use цепочку для базового блока
/// </summary>
private void BuildUList()
{
foreach (var dN in DList)
{
var dVar = dN.DefVariable;
foreach (var uVar in dN.UseVariables)
{
UList.Add(new UNode(uVar as DUVar, dVar as DUVar));
}
}
}
/// <summary>
/// Return the diff btw max value and min value
/// </summary>
public static float ReturnDiffBetwMaxAndMin(List <Vector3> list, H axis)
{
float res = 0;
if (axis == H.Y)
{
List <float> yS = UList.ReturnAxisList(list, axis);
float min = ReturnMinimum(yS);
float max = ReturnMax(yS);
res = Mathf.Abs(Mathf.Abs(max) - Mathf.Abs(min));
}
return(res);
}
/// Creates a list for the selected sub polygons given the columns and rows
List <Vector3> CreateListSelected(ref List <Vector3> objsHitTerrain, int columns, int rows, Vector3 iniHit,
SubDivider subDivide, bool isMouseOnTerrain, Vertexer vertex, UPoly poly, List <Vector3> currentHoverVertices)
{
objsHitTerrain = UMesh.ReturnThePos(iniHit, subDivide.XSubStep, subDivide.ZSubStep, columns, rows);
List <Vector3> res = new List <Vector3>();
for (int i = 0; i < objsHitTerrain.Count; i++)
{
res = UList.AddOneListToList(res, CreateOneSubPoly(objsHitTerrain[i], isMouseOnTerrain, vertex,
subDivide, poly, currentHoverVertices));
}
//still needs to eliminate duplicates
return(res);
}
/// <summary>
/// Find the common values of the 'list' on the 'axis' passed.
/// For ex: is used to find all the values of Y in the mesh
///
/// Will order by if 'order' was specified
/// </summary>
/// <param name="axis"></param>
/// <param name="list"></param>
/// <returns></returns>
public static List <float> FindXAxisCommonValues(List <Vector3> list, H order)
{
if (order == H.Descending)
{
list = list.OrderByDescending(a => a.x).ToList();
}
else if (order == H.Ascending)
{
list = list.OrderBy(a => a.x).ToList();
}
var res = UList.ReturnAxisList(list, H.X);
res = res.Distinct().ToList();
return(res);
}
/// <summary>
/// This is the routine that is looped with the Update() will change CurrentLoop
/// thru all steps
/// </summary>
private void SetListsRoutine()
{
if (CurrentLoop == H.TerraSpawn)
{
if (_prevWayHor.Count > 0)
{
MarkTerraSpawnRoutine(_prevWayHor[0].Radius, UList.ReturnTheVector3List(_prevWayHor));
}
if (_prevWayVertic.Count > 0)
{
MarkTerraSpawnRoutine(_prevWayVertic[0].Radius, UList.ReturnTheVector3List(_prevWayVertic));
}
_currentLoop = H.Vertic;
}
else if (CurrentLoop == H.Vertic)
{
if (_counter < _verticPathNew.Count)
{
_subMeshPathVertic.Add(FindSubMeshVert(_verticPathNew[_counter]));
_planesDimVertic.Add(ReturnPlanesDim(_subMeshPathVertic[_counter]));
_counter++;
}
else
{
_counter = 0;
_currentLoop = H.Horiz;
}
}
else if (CurrentLoop == H.Horiz)
{
if (_counter < _horPathNew.Count)
{
_subMeshPathHor.Add(FindSubMeshVert(_horPathNew[_counter]));
_planesDimHor.Add(ReturnPlanesDim(_subMeshPathHor[_counter]));
_counter++;
}
else
{
_counter = 0;
_currentLoop = H.PlanesVertic;
_isToSetList = false;
_isBuildingWay = true;
}
}
}
void MapStructuresCatego()
{
var infrastructure = StInfr.GetValues(typeof(StInfr));
var housing = StHous.GetValues(typeof(StHous));
var farming = StFarm.GetValues(typeof(StFarm));
var raw = StRaw.GetValues(typeof(StRaw));
var production = StProd.GetValues(typeof(StProd));
var industry = StInd.GetValues(typeof(StInd));
var trade = StTrade.GetValues(typeof(StTrade));
var govServ = StGov.GetValues(typeof(StGov));
var other = StOther.GetValues(typeof(StOther));
var mil = StMil.GetValues(typeof(StMil));
var structCateg = StCat.GetValues(typeof(StCat));
var dec = StDec.GetValues(typeof(StDec));
MenuGroupsList = UList.ConvertToList(structCateg);
List <List <H> > listedArrays = new List <List <H> >();
listedArrays.Add(UList.ConvertToList(infrastructure));
listedArrays.Add(UList.ConvertToList(housing));
listedArrays.Add(UList.ConvertToList(farming));
listedArrays.Add(UList.ConvertToList(raw));
listedArrays.Add(UList.ConvertToList(production));
listedArrays.Add(UList.ConvertToList(industry));
listedArrays.Add(UList.ConvertToList(trade));
listedArrays.Add(UList.ConvertToList(govServ));
listedArrays.Add(UList.ConvertToList(other));
listedArrays.Add(UList.ConvertToList(mil));
listedArrays.Add(UList.ConvertToList(dec));
for (int i = 0; i < MenuGroupsList.Count; i++)
{
_structuresDict.Add(MenuGroupsList[i], listedArrays[i]);
}
foreach (KeyValuePair <H, List <H> > entry in StructuresDict)
{
for (int i = 0; i < entry.Value.Count; i++)
{
AllStructures.Add(entry.Value[i]);
}
}
}
/// <summary>
/// Subdive a lot. Will move the ref Vector3 start to the end of
/// the lot and will send the value bak to the caller of this method
/// </summary>
/// <param name="start">Start point of the lot... will be ref back here</param>
/// <param name="polyX">how many poly on X</param>
/// <param name="polyZ">how many ppoly oin Z</param>
/// <param name="stepX">how far in X a real vertices is from another</param>
/// <param name="stepZ">how far in Z a real vertices is from another</param>
/// <param name="inPolyDiv">in poly divisions</param>
/// <param name="vertices">all mesh vertices[]</param>
/// <returns>a Vector3 list with the lot</returns>
public List <Vector3> SubDivideLot(ref Vector3 start, int polyX, int polyZ,
float stepX, float stepZ, int inPolyDiv, Vector3[] vertices)
{
float localStepZ = 0;
List <Vector3> lot = new List <Vector3>();
Vector3 temp = start;
Vector3 real = new Vector3();
for (int i = 0; i < polyZ; i++)
{
temp = start;
temp.z = start.z + localStepZ;
//to make sure we are on top of a real vertex
Vector3 realDummy = m.Vertex.BuildVertexWithXandZ(temp.x, temp.z);
real = m.Vertex.FindClosestVertex(realDummy, vertices);
for (int j = 0; j < polyX; j++)
{
List <Vector3> poly = returnPoly(real, vertices);
List <Vector3> newLot = SubDividePoly(poly, inPolyDiv, H.Tile);
CheckIfStopScanning(newLot, polyX, polyZ, start);
lot = UList.AddOneListToList(lot, newLot);
temp.x = real.x + Mathf.Abs(stepX);
realDummy = m.Vertex.BuildVertexWithXandZ(temp.x, temp.z); //
//in the last row has to jump in Z: temp.z - Mathf.Abs(stepZ))
if (j == polyX - 1)
{
//to make sure we are on top of a real vertex
realDummy = m.Vertex.BuildVertexWithXandZ(temp.x, temp.z - Mathf.Abs(stepZ)); //
}
real = m.Vertex.FindClosestVertex(realDummy, vertices);
}
//with multoplicacton was loosing big time precision...
//that why im adding here the values... with floats avoid multiplcations
localStepZ = localStepZ + stepZ;
}
start = real;
//lot = UList.EliminateDuplicatesByDist(lot, 0.01f);
//print(lot.Count + ".lot.count");
return(lot);
}
/// <summary>
/// If realvertices in lots were not found will flagged. And when all were done will finally write the XML
/// </summary>
private void FinalWrite()
{
if (!isToSetRealVerticesOnLots && realVertiesDoneCount == 0)
{
isToSetRealVerticesOnLots = true;
}
else if (isToSetRealVerticesOnLots && realVertiesDoneCount == Lots.Count)
{
Malla.Lots = Lots;
subMesh.AllSubMeshedLots = Malla.Lots;
subMesh.amountOfSubVertices = AllVertexs.Count;
subMesh.mostCommonYValue = UList.FindMostCommonValue(H.Y, Vertices.ToList());
WriteXML();
//print(subMesh.amountOfSubVertices + " subMesh.amountOfSubVertices ");
isToSetRealVerticesOnLots = false;
}
}
bool TellMeIfTopOnesAreEven(List <Vector3> list)
{
List <float> yS = UList.ReturnAxisList(list, H.Y);
float planesOnAirY = FindPlanesOnAirHeight();
for (int i = 0; i < list.Count; i++)
{
if (list[i].y > planesOnAirY)
{
float diff = Mathf.Abs(planesOnAirY - list[i].y);
if (diff > _maxDiffAllowOnTerrainForARoad)
{
return(false);
}
}
}
return(true);
}
private float valYSearch = 0.0001f;//0.05f
private void PullMostCommonYLayer()
{
var yS = UList.FindYAxisCommonValues(m.AllVertexs, H.Descending);
float yCommon = UList.FindFirstYBelow(yS, m.IniTerr.MathCenter.y);
_commomLayer = UList.FindVectorsOnSameHeight(m.Vertices.ToList(), yCommon, valYSearch);
Debug.Log("_commomLayer.Count:" + _commomLayer.Count);
if (_commomLayer.Count == 0 && secCount < 1000)
{
valYSearch += 0.001f;
secCount++;
PullMostCommonYLayer();
}
else if (_commomLayer.Count == 0 && secCount >= 1000)
{
throw new Exception("Not pull anything from CommonY Layer");
}
}
//will even many polys in Y. this Method has a bug that
//put all vertices toghether
public List <Vector3> EvenInYManyPolys(List <Vector3> manyPoly, ref Vector3[] vertices, ref bool isToEven,
float maxHeightForEven, ref float minY)
{
float maxY = UMath.ReturnMax(UList.ReturnAxisList(manyPoly, H.Y));
minY = UMath.ReturnMinimum(UList.ReturnAxisList(manyPoly, H.Y));
float heightDiff = maxY - minY;
if (heightDiff >= maxHeightForEven)
{
isToEven = false;
return(manyPoly);
}
isToEven = true;
//print(heightDiff + " heightDiff");
for (int i = 0; i < manyPoly.Count; i++)
{
Vector3 newModifiedYPos = manyPoly[i];
newModifiedYPos.y = minY;
manyPoly[i] = newModifiedYPos;
}
float epsilon = 0.1f;
for (int i = 0; i < vertices.Length; i++)
{
for (int j = 0; j < manyPoly.Count; j++)
{
//if this are the same in X and Z we are updating
bool x = UMath.nearlyEqual(vertices[i].x, manyPoly[j].x, epsilon);
bool z = UMath.nearlyEqual(vertices[i].z, manyPoly[j].z, epsilon);
if (x && z)
{ //updating the whole vertices matrix
vertices[i] = manyPoly[j];
}
}
}
return(manyPoly);
}
static void Main(string[] args)
{
// get a slice of a List
var utilList = new UList <int> {
1, 2, 3, 5, 43, 42, 6, 88, 886, 864
};
Console.WriteLine("Original Util List: ");
Console.WriteLine(utilList);
// call the get next.
Console.WriteLine(utilList.GetNext());
Console.WriteLine(utilList.GetNext());
utilList.GetNext();
Console.WriteLine(utilList.GetNext());
// make sure that the foreach still works
Console.WriteLine(utilList);
Console.WriteLine("Program Success.");
}
// Full,//this will use create object everywere in the poly
//Tile//this one will only fill so the next poly doesnt create any obj was created on this one
//already
public List <Vector3> SubDividePoly(List <Vector3> poly, int divs, H fillStyle)
{
List <Vector3> filled = new List <Vector3>();
List <Vector3> topLine = SubDivideLine(poly, 0, 1, divs, H.X);
List <Vector3> leftLine = SubDivideLine(poly, 1, 2, divs, H.Z);
if (fillStyle == H.Full)
{
List <Vector3> botLine = SubDivideLine(poly, 2, 3, divs, H.X);
List <Vector3> rightLine = SubDivideLine(poly, 3, 0, divs, H.Z);
filled = UList.AddManyListToList(botLine, rightLine, leftLine);
}
List <Vector3> fill = FillPolygonWrite(topLine, leftLine);
filled = UList.AddManyListToList(filled, topLine, leftLine);
filled = UList.AddOneListToList(filled, fill);
float dist = 0.001f;
//filled = UList.EliminateDuplicatesByDist(filled, dist);
filled = filled.Distinct().ToList();
//print(filled.Count + "filled");
return(filled);
}
private void DefineCurrentRow()
{
//_currRow.Add
var xS = UList.FindXAxisCommonValues(_eaten, H.Descending);
var zS = UList.FindZAxisCommonValues(_eaten, H.Descending);
float find = 0;
H axis = H.None;
//norht find the top value on z
if (_direction == 0)
{
find = UMath.ReturnMax(zS);
axis = H.Z;
}
//south
else if (_direction == 2)
{
find = UMath.ReturnMinimum(zS);
axis = H.Z;
}
//east
else if (_direction == 1)
{
find = UMath.ReturnMax(xS);
axis = H.X;
}
//west
else if (_direction == 3)
{
find = UMath.ReturnMinimum(xS);
axis = H.X;
}
_currRow = UList.FindVectorsOnSameRange(_eaten, find, axis, 0.05f);
}
