public void AddPointToConnectedNetwork()
{
TECControllerType type = new TECControllerType(new TECManufacturer());
TECProtocol protocol = new TECProtocol(new List <TECConnectionType>());
type.IO.Add(new TECIO(IOType.AI));
type.IO.Add(new TECIO(protocol));
TECProvidedController controller = new TECProvidedController(type);
TECDevice device = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol> {
protocol
}, new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(device);
controller.Connect(subScope, protocol);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
subScope.AddPoint(point);
Assert.IsTrue(subScope.Points.Contains(point));
Assert.IsTrue(controller.AvailableIO.IONumber(IOType.AI) == 1);
TECPoint otherPoint = new TECPoint();
otherPoint.Type = IOType.AI;
subScope.AddPoint(otherPoint);
Assert.IsTrue(subScope.Points.Contains(otherPoint));
Assert.IsTrue(controller.AvailableIO.IONumber(IOType.AI) == 1);
}
private void addExecute()
{
for (int x = 0; x < Quantity; x++)
{
TECSubScope subScope = null;
if (underlyingTemplate != null)
{
subScope = AsReference ? templates.SubScopeSynchronizer.NewItem(underlyingTemplate) : new TECSubScope(underlyingTemplate);
subScope.CopyPropertiesFromScope(ToAdd);
foreach (IEndDevice device in ToAdd.Devices.Where(item => !originalDevices.Contains(item)))
{
subScope.AddDevice(device);
}
foreach (TECPoint point in ToAdd.Points.Where(item => !originalPoints.Contains(item)))
{
subScope.AddPoint(point);
}
}
else
{
subScope = new TECSubScope(ToAdd);
}
add(subScope);
if (ConnectVM != null && ConnectVM.Connect)
{
ConnectVM.ExecuteConnection(subScope);
}
Added?.Invoke(subScope);
}
}
public void RemovePointFromConnectedHardwired()
{
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(IOType.AI));
TECProvidedController controller = new TECProvidedController(type);
TECConnectionType connectionType = new TECConnectionType();
TECDevice device = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>(), new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(device);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
subScope.AddPoint(point);
controller.Connect(subScope, subScope.HardwiredProtocol());
subScope.RemovePoint(point);
Assert.IsFalse(subScope.Points.Contains(point));
Assert.IsTrue(controller.AvailableIO.IONumber(IOType.AI) == 1);
}
public void CanChangeTypeTest1()
{
TECControllerType cType = new TECControllerType(new TECManufacturer());
TECProtocol protocol = new TECProtocol(new List <TECConnectionType>());
cType.IO.Add(new TECIO(protocol));
cType.IO.Add(new TECIO(IOType.AI));
TECControllerType otherCType = new TECControllerType(new TECManufacturer());
TECProvidedController controller = new TECProvidedController(cType);
TECSubScope ss1 = new TECSubScope();
TECSubScope ss2 = new TECSubScope();
TECDevice proDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol>()
{
protocol
}, new TECManufacturer());
TECDevice hardDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol>(), new TECManufacturer());
ss1.Devices.Add(proDevice);
ss2.Devices.Add(hardDevice);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
ss2.AddPoint(point);
controller.Connect(ss1, protocol);
controller.Connect(ss2, ss2.HardwiredProtocol());
Assert.IsFalse(controller.CanChangeType(otherCType));
}
public void AddPointTest()
{
TECSubScope subScope = new TECSubScope();
TECPoint point = new TECPoint();
subScope.AddPoint(point);
Assert.IsTrue(subScope.Points.Contains(point));
}
public void RemovePointTest()
{
TECSubScope subScope = new TECSubScope();
TECPoint point = new TECPoint();
subScope.AddPoint(point);
subScope.RemovePoint(point);
Assert.IsFalse(subScope.Points.Contains(point));
}
public void SubScopeTemplateChanged()
{
//Arrange
TECTemplates templates = new TECTemplates();
TECSubScope templateSS = new TECSubScope();
templateSS.Name = "Template SubScope";
templates.Templates.SubScopeTemplates.Add(templateSS);
TemplateSynchronizer <TECSubScope> ssSynchronizer = templates.SubScopeSynchronizer;
TECSubScope refSS = ssSynchronizer.NewItem(templateSS);
TECEquipment equip = new TECEquipment();
templates.Templates.EquipmentTemplates.Add(equip);
equip.SubScope.Add(refSS);
TECDevice dev = new TECDevice(new List <TECConnectionType>(),
new List <TECProtocol>(),
new TECManufacturer());
templates.Catalogs.Add(dev);
TECPoint point = new TECPoint();
point.Label = "Test Point";
point.Type = IOType.AI;
point.Quantity = 5;
TECAssociatedCost cost = new TECAssociatedCost(CostType.TEC);
templates.Catalogs.Add(cost);
TECTag tag = new TECTag();
templates.Catalogs.Add(tag);
//Act
templateSS.Description = "Test Description";
templateSS.Devices.Add(dev);
templateSS.AddPoint(point);
templateSS.AssociatedCosts.Add(cost);
templateSS.Tags.Add(tag);
//Assert
//Assert.AreEqual(templateSS.Description, refSS.Description, "Description didn't sync properly between SubScope.");
Assert.AreEqual(templateSS.Devices[0], refSS.Devices[0], "Devices didn't sync properly between SubScope.");
Assert.AreEqual(templateSS.Points[0].Label, refSS.Points[0].Label, "Points didn't sync properly between SubScope.");
Assert.AreEqual(templateSS.Points[0].Type, refSS.Points[0].Type, "Points didn't sync properly between SubScope.");
Assert.AreEqual(templateSS.Points[0].Quantity, refSS.Points[0].Quantity, "Points didn't sync properly between SubScope.");
Assert.AreEqual(templateSS.AssociatedCosts[0], refSS.AssociatedCosts[0], "Associated costs didn't sync properly between SubScope.");
Assert.AreEqual(templateSS.Tags[0], refSS.Tags[0], "Tags didn't sync properly between SubScope.");
}
private void testNetworkExecute()
{
TECControllerType type = new TECControllerType(bid.Catalogs.Manufacturers[0]);
type.Name = "Controller Type";
type.IO.Add(new TECIO(IOType.AI));
bid.Catalogs.Add(type);
TECProvidedController controller = new TECProvidedController(type);
controller.Name = "Test Server";
controller.Description = "For testing.";
controller.IsServer = true;
bid.AddController(controller);
TECProvidedController child = new TECProvidedController(type);
child.Name = "Child";
bid.AddController(child);
TECProvidedController emptyController = new TECProvidedController(type);
emptyController.Name = "EmptyController";
bid.AddController(emptyController);
TECNetworkConnection connection = controller.AddNetworkConnection(bid.Catalogs.Protocols[0]);
connection.AddChild(child);
TECTypical typical = new TECTypical();
TECEquipment equip = new TECEquipment();
TECSubScope ss = new TECSubScope();
ss.Name = "Test Subscope";
ss.AddDevice(bid.Catalogs.Devices[0]);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
point.Quantity = 1;
ss.AddPoint(point);
equip.SubScope.Add(ss);
typical.Equipment.Add(equip);
bid.Systems.Add(typical);
typical.AddInstance();
}
public void ChangeTypeTest()
{
TECControllerType cType = new TECControllerType(new TECManufacturer());
TECProtocol protocol = new TECProtocol(new List <TECConnectionType>());
cType.IO.Add(new TECIO(protocol));
cType.IO.Add(new TECIO(IOType.AI));
TECControllerType otherCType = new TECControllerType(new TECManufacturer());
otherCType.IO.Add(new TECIO(protocol));
otherCType.IO.Add(new TECIO(IOType.AI));
TECProvidedController controller = new TECProvidedController(cType);
TECSubScope ss1 = new TECSubScope();
TECSubScope ss2 = new TECSubScope();
TECConnectionType connectionType = new TECConnectionType();
TECDevice proDevice = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>()
{
protocol
}, new TECManufacturer());
TECDevice hardDevice = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>(), new TECManufacturer());
ss1.Devices.Add(proDevice);
ss2.Devices.Add(hardDevice);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
ss2.AddPoint(point);
controller.Connect(ss1, protocol);
controller.Connect(ss2, ss2.HardwiredProtocol());
controller.ChangeType(otherCType);
Assert.AreEqual(2, controller.ChildrenConnections.Count);
Assert.AreEqual(controller, (ss1 as IConnectable).GetParentConnection().ParentController);
Assert.AreEqual(controller, (ss2 as IConnectable).GetParentConnection().ParentController);
}
private void addExecute()
{
var newPoint = new TECPoint(ToAdd);
parent.AddPoint(newPoint);
if (parent.Connection != null && parent.Connection is TECHardwiredConnection hardwiredConnection)
{
var parentController = parent.Connection.ParentController;
var length = hardwiredConnection.Length;
var conduitLength = hardwiredConnection.ConduitLength;
var conduit = hardwiredConnection.ConduitType;
var isPlenum = hardwiredConnection.IsPlenum;
var protocol = hardwiredConnection.Protocol;
parentController.Disconnect(parent);
var newConnection = parentController.Connect(parent, protocol);
newConnection.Length = length;
newConnection.ConduitLength = conduitLength;
newConnection.ConduitType = conduit;
newConnection.IsPlenum = isPlenum;
}
Added?.Invoke(newPoint);
}
private void addTypicalExecute()
{
TECTypical typical = new TECTypical();
typical.Name = "test";
TECEquipment equipment = new TECEquipment();
equipment.Name = "test equipment";
TECSubScope ss = new TECSubScope();
ss.Name = "Test Subscope";
ss.AddDevice(bid.Catalogs.Devices[0]);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
point.Quantity = 1;
ss.AddPoint(point);
equipment.SubScope.Add(ss);
typical.Equipment.Add(equipment);
TECSubScope connected = new TECSubScope();
connected.Name = "Connected";
connected.AddDevice(bid.Catalogs.Devices[0]);
TECPoint point2 = new TECPoint();
point2.Type = IOType.AI;
point2.Quantity = 1;
connected.AddPoint(point2);
equipment.SubScope.Add(connected);
TECSubScope toConnect = new TECSubScope();
toConnect.Name = "To Connect";
toConnect.AddDevice(bid.Catalogs.Devices[0]);
TECPoint point3 = new TECPoint();
point3.Type = IOType.AI;
point3.Quantity = 1;
toConnect.AddPoint(point3);
equipment.SubScope.Add(toConnect);
TECControllerType controllerType = new TECControllerType(new TECManufacturer());
controllerType.IOModules.Add(bid.Catalogs.IOModules[0]);
TECIO io = new TECIO(IOType.AI);
io.Quantity = 10;
controllerType.IO.Add(io);
bid.Catalogs.IOModules[0].IO.Add(io);
controllerType.Name = "Test Type";
TECProvidedController controller = new TECProvidedController(controllerType);
controller.IOModules.Add(bid.Catalogs.IOModules[0]);
controller.Name = "Test Controller";
typical.AddController(controller);
TECProvidedController otherController = new TECProvidedController(controllerType);
otherController.Name = "Other Controller";
typical.AddController(otherController);
IControllerConnection connection = controller.Connect(connected, (connected as IConnectable).AvailableProtocols.First());
connection.Length = 10;
connection.ConduitLength = 20;
connection.ConduitType = bid.Catalogs.ConduitTypes[1];
TECPanelType panelType = new TECPanelType(new TECManufacturer());
panelType.Name = "test type";
TECPanel panel = new TECPanel(panelType);
panel.Name = "Test Panel";
typical.Panels.Add(panel);
TECMisc misc = new TECMisc(CostType.TEC);
misc.Name = "test Misc";
typical.MiscCosts.Add(misc);
bid.Systems.Add(typical);
typical.AddInstance();
}
public void ConnectToControllerTest3()
{
TECDevice protDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol>(), new TECManufacturer());
List <IConnectable> connectables = new List <IConnectable>();
TECSubScope item1 = new TECSubScope();
item1.Devices.Add(protDevice);
TECPoint aiPoint = new TECPoint();
aiPoint.Type = IOType.AI;
item1.AddPoint(aiPoint);
connectables.Add(item1);
TECSubScope item2 = new TECSubScope();
item2.Devices.Add(protDevice);
TECPoint diPoint = new TECPoint();
diPoint.Type = IOType.DI;
item2.AddPoint(diPoint);
connectables.Add(item2);
TECSubScope item3 = new TECSubScope();
item3.Devices.Add(protDevice);
TECPoint doPoint = new TECPoint();
doPoint.Type = IOType.DO;
item3.AddPoint(doPoint);
connectables.Add(item3);
TECSubScope item4 = new TECSubScope();
item4.Devices.Add(protDevice);
TECPoint aoPoint = new TECPoint();
aoPoint.Type = IOType.AO;
item4.AddPoint(aoPoint);
connectables.Add(item4);
TECSubScope item5 = new TECSubScope();
item5.Devices.Add(protDevice);
TECPoint otherAoPoint = new TECPoint();
otherAoPoint.Type = IOType.AO;
item5.AddPoint(otherAoPoint);
connectables.Add(item5);
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(IOType.UI));
type.IO.Add(new TECIO(IOType.UI));
type.IO.Add(new TECIO(IOType.UO));
type.IO.Add(new TECIO(IOType.UO));
type.IO.Add(new TECIO(IOType.UI));
TECProvidedController controller = new TECProvidedController(type);
List <IControllerConnection> connections = ConnectionHelper.ConnectToController(connectables, controller, new ConnectionProperties());
foreach (var thing in connectables)
{
Assert.IsFalse(connections.Any(x => connectionContainsItem(x, thing)));
}
}
public void CanConnectToControllerTest3()
{
TECConnectionType connectionType = new TECConnectionType();
TECDevice device = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>(), new TECManufacturer());
List <IConnectable> connectables = new List <IConnectable>();
TECSubScope item1 = new TECSubScope();
item1.Devices.Add(device);
TECPoint aiPoint = new TECPoint();
aiPoint.Type = IOType.AI;
item1.AddPoint(aiPoint);
connectables.Add(item1);
TECSubScope item2 = new TECSubScope();
item2.Devices.Add(device);
TECPoint diPoint = new TECPoint();
diPoint.Type = IOType.DI;
item2.AddPoint(diPoint);
connectables.Add(item2);
TECSubScope item3 = new TECSubScope();
item3.Devices.Add(device);
TECPoint doPoint = new TECPoint();
doPoint.Type = IOType.DO;
item3.AddPoint(doPoint);
connectables.Add(item3);
TECSubScope item4 = new TECSubScope();
item4.Devices.Add(device);
TECPoint aoPoint = new TECPoint();
aoPoint.Type = IOType.AO;
item4.AddPoint(aoPoint);
connectables.Add(item4);
TECSubScope item5 = new TECSubScope();
item5.Devices.Add(device);
TECPoint otherAoPoint = new TECPoint();
otherAoPoint.Type = IOType.AO;
item5.AddPoint(otherAoPoint);
connectables.Add(item5);
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(IOType.UI));
type.IO.Add(new TECIO(IOType.UI));
type.IO.Add(new TECIO(IOType.UO));
type.IO.Add(new TECIO(IOType.UO));
type.IO.Add(new TECIO(IOType.UI));
TECProvidedController controller = new TECProvidedController(type);
Assert.IsFalse(ConnectionHelper.CanConnectToController(connectables, controller));
}
public static void AddBidConnections(TECBid bid, IEnumerable <TECTypical> typicals, TECCatalogs catalogs, Random rand)
{
var typ = typicals.Where(x => x.Instances.Count > 0).RandomElement(rand);
var system = typ.Instances.RandomElement(rand);
var hardwiredDevice = catalogs.Devices.Where(x => x.HardwiredConnectionTypes.Count > 0).RandomElement(rand) ??
new TECDevice(catalogs.ConnectionTypes.RandomElements(rand, false), new List <TECProtocol>(), catalogs.Manufacturers.RandomElement(rand));
if (!catalogs.Devices.Contains(hardwiredDevice))
{
catalogs.Add(hardwiredDevice);
}
var networkDevice = catalogs.Devices.Where(x => x.PossibleProtocols.Count > 0 && x != hardwiredDevice).RandomElement(rand) ??
new TECDevice(new List <TECConnectionType>(), new List <TECProtocol> {
catalogs.Protocols.RandomElement(rand)
}, catalogs.Manufacturers.RandomElement(rand));
var hardwiredSubScope = new TECSubScope();
hardwiredSubScope.Devices.Add(hardwiredDevice);
hardwiredSubScope.AddPoint(TestPoint(rand));
var hardwiredProtocol = hardwiredSubScope.AvailableProtocols.Where(x => x is TECHardwiredProtocol).RandomElement(rand) as TECHardwiredProtocol;
var networkSubScope = new TECSubScope();
networkSubScope.Devices.Add(networkDevice);
networkSubScope.AddPoint(TestPoint(rand));
var networkProtocol = networkSubScope.AvailableProtocols.Where(x => x is TECProtocol).RandomElement(rand) as TECProtocol;
typ.Equipment.RandomElement(rand).SubScope.Add(hardwiredSubScope);
typ.Equipment.RandomElement(rand).SubScope.Add(networkSubScope);
networkSubScope = system.GetAllSubScope().First(x => typ.GetInstancesFromTypical(networkSubScope).Contains(x));
hardwiredSubScope = system.GetAllSubScope().First(x => typ.GetInstancesFromTypical(hardwiredSubScope).Contains(x));
var hardwiredControllerType = catalogs.ControllerTypes.Where(x => new TECProvidedController(x).AvailableIO.Contains((hardwiredSubScope as IConnectable).HardwiredIO)).RandomElement(rand) ??
new TECControllerType(catalogs.Manufacturers.RandomElement(rand));
if (!catalogs.ControllerTypes.Contains(hardwiredControllerType))
{
catalogs.Add(hardwiredControllerType);
hardwiredControllerType.IO.AddRange((hardwiredSubScope as IConnectable).HardwiredIO.ToList());
}
var hardwiredController = bid.Controllers.Where(x => x is TECProvidedController y && y.Type == hardwiredControllerType).RandomElement(rand) ??
new TECProvidedController(hardwiredControllerType);
if (!bid.Controllers.Contains(hardwiredController))
{
bid.AddController(hardwiredController);
}
var networkControllerType = catalogs.ControllerTypes.Where(x => new TECProvidedController(x).AvailableProtocols.Any(y => y == networkProtocol)).RandomElement(rand) ??
new TECControllerType(catalogs.Manufacturers.RandomElement(rand));
if (!catalogs.ControllerTypes.Contains(networkControllerType))
{
catalogs.Add(networkControllerType);
networkControllerType.IO.Add(new TECIO(networkProtocol));
}
var networkController = bid.Controllers.Where(x => x is TECProvidedController y && y.Type == networkControllerType && y.AvailableProtocols.Contains(networkProtocol)).RandomElement(rand) ??
new TECProvidedController(networkControllerType);
if (!bid.Controllers.Contains(networkController))
{
bid.AddController(networkController);
}
var hardwiredConnection = hardwiredController.Connect(hardwiredSubScope, hardwiredProtocol);
var networkConnection = networkController.Connect(networkSubScope, networkProtocol);
hardwiredConnection.AssignRandomConnectionProperties(catalogs, rand);
networkConnection.AssignRandomConnectionProperties(catalogs, rand);
}
public static void AddSystemConnections(TECSystem system, TECCatalogs catalogs, Random rand)
{
var hardwiredDevice = catalogs.Devices.Where(x => x.HardwiredConnectionTypes.Count > 0).RandomElement(rand) ??
new TECDevice(catalogs.ConnectionTypes.RandomElements(rand, false), new List <TECProtocol>(), catalogs.Manufacturers.RandomElement(rand));
if (!catalogs.Devices.Contains(hardwiredDevice))
{
catalogs.Add(hardwiredDevice);
}
var networkDevice = catalogs.Devices.Where(x => x.PossibleProtocols.Count > 0 && x != hardwiredDevice).RandomElement(rand) ??
new TECDevice(new List <TECConnectionType>(), new List <TECProtocol> {
catalogs.Protocols.RandomElement(rand)
}, catalogs.Manufacturers.RandomElement(rand));
var hardwiredSubScope = new TECSubScope();
hardwiredSubScope.Devices.Add(hardwiredDevice);
hardwiredSubScope.AddPoint(TestPoint(rand));
var hardwiredProtocol = hardwiredSubScope.AvailableProtocols.Where(x => x is TECHardwiredProtocol).RandomElement(rand) as TECHardwiredProtocol;
var networkSubScope = new TECSubScope();
networkSubScope.Devices.Add(networkDevice);
networkSubScope.AddPoint(TestPoint(rand));
var networkProtocol = networkSubScope.AvailableProtocols.Where(x => x is TECProtocol).RandomElement(rand) as TECProtocol;
system.Equipment.RandomElement(rand).SubScope.Add(hardwiredSubScope);
system.Equipment.RandomElement(rand).SubScope.Add(networkSubScope);
var hardwiredControllerType = catalogs.ControllerTypes.Where(x => new TECProvidedController(x).CanConnect(hardwiredSubScope, hardwiredProtocol)).RandomElement(rand) ??
new TECControllerType(catalogs.Manufacturers.RandomElement(rand));
if (!catalogs.ControllerTypes.Contains(hardwiredControllerType))
{
catalogs.Add(hardwiredControllerType);
hardwiredControllerType.IO.AddRange((hardwiredSubScope as IConnectable).HardwiredIO.ToList());
}
var hardwiredController = system.Controllers.Where(x => x is TECProvidedController y && y.Type == hardwiredControllerType && y.CanConnect(hardwiredSubScope, hardwiredProtocol)).RandomElement(rand) ??
new TECProvidedController(hardwiredControllerType);
if (!system.Controllers.Contains(hardwiredController))
{
system.AddController(hardwiredController);
}
var networkControllerType = catalogs.ControllerTypes.Where(x => new TECProvidedController(x).AvailableProtocols.Any(y => y == networkProtocol)).RandomElement(rand) ??
new TECControllerType(catalogs.Manufacturers.RandomElement(rand));
if (!catalogs.ControllerTypes.Contains(networkControllerType))
{
catalogs.Add(networkControllerType);
networkControllerType.IO.Add(new TECIO(networkProtocol));
}
var networkController = system.Controllers.Where(x => x is TECProvidedController y && y.Type == networkControllerType && y.CanConnect(networkSubScope, networkProtocol)).RandomElement(rand) ??
new TECProvidedController(networkControllerType);
if (!system.Controllers.Contains(networkController))
{
system.AddController(networkController);
}
var hardwiredConnection = hardwiredController.Connect(hardwiredSubScope, hardwiredProtocol);
var networkConnection = networkController.Connect(networkSubScope, networkProtocol);
hardwiredConnection.AssignRandomConnectionProperties(catalogs, rand);
networkConnection.AssignRandomConnectionProperties(catalogs, rand);
}
public void EquipmentReferenceChanged()
{
//Arrange
TECTemplates templates = new TECTemplates();
TECEquipment templateEquip = new TECEquipment();
templateEquip.Name = "Template Equip";
templates.Templates.EquipmentTemplates.Add(templateEquip);
TemplateSynchronizer <TECEquipment> equipSynchronizer = templates.EquipmentSynchronizer;
TECEquipment refEquip = equipSynchronizer.NewItem(templateEquip);
TECSystem sys = new TECSystem();
templates.Templates.SystemTemplates.Add(sys);
sys.Equipment.Add(refEquip);
TECDevice dev = new TECDevice(new List <TECConnectionType>(),
new List <TECProtocol>(),
new TECManufacturer());
templates.Catalogs.Add(dev);
TECPoint point = new TECPoint();
point.Label = "Test Point";
point.Type = IOType.AI;
point.Quantity = 5;
TECAssociatedCost cost = new TECAssociatedCost(CostType.TEC);
templates.Catalogs.Add(cost);
TECTag tag = new TECTag();
templates.Catalogs.Add(tag);
TECSubScope ss = new TECSubScope();
ss.Description = "Test Description";
ss.Devices.Add(dev);
ss.AddPoint(point);
ss.AssociatedCosts.Add(cost);
ss.Tags.Add(tag);
templates.Templates.SubScopeTemplates.Add(ss);
//Act
refEquip.Description = "Test Description";
refEquip.SubScope.Add(ss);
refEquip.AssociatedCosts.Add(cost);
refEquip.Tags.Add(tag);
//Assert
//Assert.AreEqual(refEquip.Description, templateEquip.Description, "Description didn't sync properly between Equipment.");
Assert.IsNotNull(templateEquip.SubScope[0], "SubScope didn't sync properly between Equipment.");
TECSubScope templateSubScope = templateEquip.SubScope[0];
TECSubScope refSubScope = refEquip.SubScope[0];
//Assert.AreEqual(refSubScope.Description, templateSubScope.Description, "Description didn't sync properly between SubScope in Equipment.");
Assert.AreEqual(refSubScope.Devices[0], templateSubScope.Devices[0], "Devices didn't sync properly between SubScope in Equipment.");
Assert.AreEqual(refSubScope.Points[0].Label, templateSubScope.Points[0].Label, "Points didn't sync properly between SubScope in Equipment.");
Assert.AreEqual(refSubScope.Points[0].Type, templateSubScope.Points[0].Type, "Points didn't sync properly between SubScope in Equipment.");
Assert.AreEqual(refSubScope.Points[0].Quantity, templateSubScope.Points[0].Quantity, "Points didn't sync properly between SubScope in Equipment.");
Assert.AreEqual(refSubScope.AssociatedCosts[0], templateSubScope.AssociatedCosts[0], "AssociatedCosts didn't sync properly between SubScope in Equipment.");
Assert.AreEqual(refSubScope.Tags[0], templateSubScope.Tags[0], "Tags didn't sync properly between SubScope.");
Assert.AreEqual(refEquip.AssociatedCosts[0], templateEquip.AssociatedCosts[0], "AssociatedCosts didn't sync properly between Equipment.");
Assert.AreEqual(refEquip.Tags[0], templateEquip.Tags[0], "Tags didn't sync properly in Equipment.");
}
