public void InstanceSubScopeRemovedFromReferenceEquipment()
{
//Arrange
TECTemplates templates = new TECTemplates();
TemplateSynchronizer <TECEquipment> equipSynchronizer = templates.EquipmentSynchronizer;
TemplateSynchronizer <TECSubScope> ssSynchronizer = templates.SubScopeSynchronizer;
TECEquipment templateEquip = new TECEquipment();
templates.Templates.EquipmentTemplates.Add(templateEquip);
TECSubScope ss = new TECSubScope();
templateEquip.SubScope.Add(ss);
TECEquipment refEqiup = equipSynchronizer.NewItem(templateEquip);
TECSubScope refSS = refEqiup.SubScope[0];
//Act
refEqiup.SubScope.Remove(refSS);
//Assert
Assert.IsTrue(templateEquip.SubScope.Count == 0, "SubScope not removed properly from Equipment template.");
Assert.IsFalse(ssSynchronizer.Contains(ss), "SubScope was not removed properly from synchronizer.");
Assert.IsFalse(ssSynchronizer.Contains(refSS), "Reference SubScope was not removed properly from synchronizer.");
}
public void CanConnectToNetworkTest1()
{
TECProtocol firstProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol secondProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol thirdProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol fourthProtocol = new TECProtocol(new List <TECConnectionType>());
TECDevice compatibleDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol>()
{
secondProtocol, firstProtocol, fourthProtocol
}, new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(compatibleDevice);
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(firstProtocol));
type.IO.Add(new TECIO(secondProtocol));
type.IO.Add(new TECIO(thirdProtocol));
TECProvidedController controller = new TECProvidedController(type);
TECNetworkConnection connection = controller.AddNetworkConnection(thirdProtocol);
Assert.IsFalse(subScope.CanConnectToNetwork(connection));
}
private void addExecute()
{
for (int x = 0; x < Quantity; x++)
{
TECSubScope subScope = null;
if (underlyingTemplate != null)
{
subScope = AsReference ? templates.SubScopeSynchronizer.NewItem(underlyingTemplate) : new TECSubScope(underlyingTemplate);
subScope.CopyPropertiesFromScope(ToAdd);
foreach (IEndDevice device in ToAdd.Devices.Where(item => !originalDevices.Contains(item)))
{
subScope.AddDevice(device);
}
foreach (TECPoint point in ToAdd.Points.Where(item => !originalPoints.Contains(item)))
{
subScope.AddPoint(point);
}
}
else
{
subScope = new TECSubScope(ToAdd);
}
add(subScope);
if (ConnectVM != null && ConnectVM.Connect)
{
ConnectVM.ExecuteConnection(subScope);
}
Added?.Invoke(subScope);
}
}
public void AddDeviceToConnectedNetwork()
{
TECControllerType type = new TECControllerType(new TECManufacturer());
TECProtocol protocol = new TECProtocol(new List <TECConnectionType>());
type.IO.Add(new TECIO(protocol));
TECProvidedController controller = new TECProvidedController(type);
TECDevice device = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol> {
protocol
}, new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(device);
controller.Connect(subScope, protocol);
TECDevice otherDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol> {
protocol
}, new TECManufacturer());
subScope.AddDevice(otherDevice);
Assert.IsTrue(subScope.Devices.Contains(otherDevice));
TECProtocol otherProtocol = new TECProtocol(new List <TECConnectionType>());
TECDevice nextDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol> {
otherProtocol
}, new TECManufacturer());
subScope.AddDevice(nextDevice);
Assert.IsFalse(subScope.Devices.Contains(nextDevice));
}
public void AvailableProtocols1()
{
TECConnectionType type1 = new TECConnectionType();
TECConnectionType type2 = new TECConnectionType();
TECProtocol prot1 = new TECProtocol(new List <TECConnectionType>());
TECProtocol prot2 = new TECProtocol(new List <TECConnectionType>());
TECProtocol prot3 = new TECProtocol(new List <TECConnectionType>());
TECDevice dev1 = new TECDevice(new List <TECConnectionType>(),
new List <TECProtocol> {
prot1, prot2
}, new TECManufacturer());
TECDevice dev2 = new TECDevice(new List <TECConnectionType> {
type2
},
new List <TECProtocol> {
prot1, prot3
}, new TECManufacturer());
TECSubScope ss = new TECSubScope();
bool dev1Added = ss.AddDevice(dev1);
bool dev2Added = ss.AddDevice(dev2);
Assert.IsTrue(dev1Added);
Assert.IsTrue(dev2Added);
Assert.IsFalse(ss.AvailableProtocols.Any(prot => { return(prot is TECHardwiredProtocol); }));
Assert.IsTrue(ss.AvailableProtocols.Contains(prot1));
Assert.IsFalse(ss.AvailableProtocols.Contains(prot2));
Assert.IsFalse(ss.AvailableProtocols.Contains(prot3));
Assert.AreEqual(1, ss.AvailableProtocols.Count);
}
public void RemoveNetworkConnectionTest()
{
TECProtocol firstProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol secondProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol thirdProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol fourthProtocol = new TECProtocol(new List <TECConnectionType>());
TECDevice compatibleDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol>()
{
secondProtocol, firstProtocol, fourthProtocol
}, new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(compatibleDevice);
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(firstProtocol));
type.IO.Add(new TECIO(secondProtocol));
type.IO.Add(new TECIO(thirdProtocol));
TECProvidedController controller = new TECProvidedController(type);
TECNetworkConnection connection = controller.Connect(subScope, firstProtocol) as TECNetworkConnection;
controller.RemoveNetworkConnection(connection);
Assert.IsFalse(connection.Children.Contains(subScope));
Assert.IsFalse(controller.ChildrenConnections.Contains(connection));
Assert.IsNull((subScope as IConnectable).GetParentConnection());
}
public void AddPointToConnectedNetwork()
{
TECControllerType type = new TECControllerType(new TECManufacturer());
TECProtocol protocol = new TECProtocol(new List <TECConnectionType>());
type.IO.Add(new TECIO(IOType.AI));
type.IO.Add(new TECIO(protocol));
TECProvidedController controller = new TECProvidedController(type);
TECDevice device = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol> {
protocol
}, new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(device);
controller.Connect(subScope, protocol);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
subScope.AddPoint(point);
Assert.IsTrue(subScope.Points.Contains(point));
Assert.IsTrue(controller.AvailableIO.IONumber(IOType.AI) == 1);
TECPoint otherPoint = new TECPoint();
otherPoint.Type = IOType.AI;
subScope.AddPoint(otherPoint);
Assert.IsTrue(subScope.Points.Contains(otherPoint));
Assert.IsTrue(controller.AvailableIO.IONumber(IOType.AI) == 1);
}
public void CanConnectTest4()
{
TECProtocol firstProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol secondProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol thirdProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol fourthProtocol = new TECProtocol(new List <TECConnectionType>());
TECDevice compatibleDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol>()
{
secondProtocol, firstProtocol, fourthProtocol
}, new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(compatibleDevice);
TECControllerType type = new TECControllerType(new TECManufacturer());
TECIOModule module = new TECIOModule(new TECManufacturer());
module.IO.Add(new TECIO(firstProtocol));
module.IO.Add(new TECIO(secondProtocol));
module.IO.Add(new TECIO(thirdProtocol));
type.IOModules.Add(module);
TECProvidedController controller = new TECProvidedController(type);
Assert.IsTrue(controller.CanConnect(subScope, firstProtocol));
Assert.IsTrue(controller.CanConnect(subScope, secondProtocol));
Assert.IsFalse(controller.CanConnect(subScope, fourthProtocol));
}
public void ConnectTest3()
{
TECConnectionType connectionType = new TECConnectionType();
TECDevice compatibleDevice = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>(), new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(compatibleDevice);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
subScope.Points.Add(point);
TECControllerType type = new TECControllerType(new TECManufacturer());
TECIOModule module = new TECIOModule(new TECManufacturer());
module.IO.Add(new TECIO(IOType.AO));
type.IOModules.Add(module);
TECProvidedController controller = new TECProvidedController(type);
TECHardwiredConnection connection = controller.Connect(subScope, subScope.HardwiredProtocol()) as TECHardwiredConnection;
Assert.IsNull(connection);
}
private string getTemplateText(TECObject item)
{
TECTemplates templates = ScopeManager as TECTemplates;
if (templates.IsTemplateObject(item))
{
string parentString = "";
if (item is TECSubScope subScope)
{
TECSubScope parent = templates.SubScopeSynchronizer.GetParent(subScope);
if (item != parent && parent != null)
{
parentString = String.Format(" of {0}",
parent.Name);
}
}
else if (item is TECEquipment equipment)
{
TECEquipment parent = templates.EquipmentSynchronizer.GetParent(equipment);
if (item != parent && parent != null)
{
parentString = String.Format(" of {0}",
parent.Name);
}
}
return(String.Format("Reference{0}",
parentString));
}
return("Instance Template");
}
public void CanChangeTypeTest1()
{
TECControllerType cType = new TECControllerType(new TECManufacturer());
TECProtocol protocol = new TECProtocol(new List <TECConnectionType>());
cType.IO.Add(new TECIO(protocol));
cType.IO.Add(new TECIO(IOType.AI));
TECControllerType otherCType = new TECControllerType(new TECManufacturer());
TECProvidedController controller = new TECProvidedController(cType);
TECSubScope ss1 = new TECSubScope();
TECSubScope ss2 = new TECSubScope();
TECDevice proDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol>()
{
protocol
}, new TECManufacturer());
TECDevice hardDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol>(), new TECManufacturer());
ss1.Devices.Add(proDevice);
ss2.Devices.Add(hardDevice);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
ss2.AddPoint(point);
controller.Connect(ss1, protocol);
controller.Connect(ss2, ss2.HardwiredProtocol());
Assert.IsFalse(controller.CanChangeType(otherCType));
}
public void Undo_Template_Equipment_SubScope()
{
//Arrange
var Template = ModelCreation.TestTemplates(rand);
var equipment = Template.Templates.EquipmentTemplates[0];
ObservableCollection <TECSubScope> expected = new ObservableCollection <TECSubScope>();
foreach (TECSubScope item in equipment.SubScope)
{
expected.Add(item);
}
TECSubScope edit = new TECSubScope();
//Act
ChangeWatcher watcher = new ChangeWatcher(Template); DoStacker testStack = new DoStacker(watcher);
equipment.SubScope.Add(edit);
Assert.AreEqual(1, testStack.UndoCount(), "Not added to undo stack");
testStack.Undo();
//assert
var actual = equipment.SubScope;
Assert.AreEqual(expected.Count, actual.Count, "Not Undone");
}
public void SaveNew_Templates_Equipment()
{
//Arrange
TECSubScope actualEquipSubScope = actualEquipment.SubScope.First(item => item.Devices.Count > 0 && item.Points.Count > 0);
TECDevice actualChildDevice = actualEquipSubScope.Devices[0] as TECDevice;
TECPoint actualEquipPoint = actualEquipSubScope.Points[0];
TECManufacturer actualChildMan = actualChildDevice.Manufacturer;
TECSubScope expectedEquipSubScope = expectedEquipment.SubScope.First(item => item.Guid == actualEquipSubScope.Guid);
TECDevice expectedChildDevice = expectedEquipSubScope.Devices[0] as TECDevice;
TECPoint expectedEquipPoint = expectedEquipSubScope.Points[0];
TECManufacturer expectedChildMan = expectedChildDevice.Manufacturer;
//Assert
Assert.AreEqual(expectedEquipment.Name, actualEquipment.Name);
Assert.AreEqual(expectedEquipment.Description, actualEquipment.Description);
Assert.AreEqual(expectedEquipment.Tags[0].Label, actualEquipment.Tags[0].Label);
Assert.AreEqual(expectedEquipSubScope.Name, actualEquipSubScope.Name);
Assert.AreEqual(expectedEquipSubScope.Description, actualEquipSubScope.Description);
Assert.AreEqual(expectedEquipSubScope.Tags[0].Label, actualEquipSubScope.Tags[0].Label);
Assert.AreEqual(expectedChildDevice.Name, actualChildDevice.Name);
Assert.AreEqual(expectedChildDevice.Description, actualChildDevice.Description);
Assert.AreEqual(expectedChildDevice.Cost, actualChildDevice.Cost, DELTA);
Assert.AreEqual(expectedEquipPoint.Label, actualEquipPoint.Label);
Assert.AreEqual(expectedEquipPoint.Quantity, actualEquipPoint.Quantity);
Assert.AreEqual(expectedEquipPoint.Type, actualEquipPoint.Type);
Assert.AreEqual(expectedChildMan.Label, actualChildMan.Label);
Assert.AreEqual(expectedChildMan.Multiplier, actualChildMan.Multiplier, DELTA);
}
public void GetConnectablesTest()
{
TECSystem system = new TECSystem();
TECEquipment equipment = new TECEquipment();
system.Equipment.Add(equipment);
TECSubScope first = new TECSubScope();
TECSubScope second = new TECSubScope();
equipment.SubScope.Add(first);
equipment.SubScope.Add(second);
TECProvidedController controller = new TECProvidedController(new TECControllerType(new TECManufacturer()));
system.AddController(controller);
var connectables = ConnectionHelper.GetConnectables(system, obj => true);
Assert.IsTrue(connectables.Count == 3);
Assert.IsTrue(connectables.Contains(first));
Assert.IsTrue(connectables.Contains(second));
Assert.IsTrue(connectables.Contains(controller));
connectables = ConnectionHelper.GetConnectables(system, obj => obj is TECSubScope);
Assert.IsTrue(connectables.Count == 2);
Assert.IsTrue(connectables.Contains(first));
Assert.IsTrue(connectables.Contains(second));
}
public void ConnectTest2()
{
TECConnectionType connectionType = new TECConnectionType();
TECDevice compatibleDevice = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>(), new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(compatibleDevice);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
subScope.Points.Add(point);
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(IOType.AI));
TECProvidedController controller = new TECProvidedController(type);
TECHardwiredConnection connection = controller.Connect(subScope, subScope.HardwiredProtocol()) as TECHardwiredConnection;
Assert.IsTrue(connection.Child == subScope);
Assert.IsTrue(controller.ChildrenConnections.Contains(connection));
Assert.IsTrue((subScope as IConnectable).GetParentConnection() == connection);
Assert.IsTrue(connection.Protocol is TECHardwiredProtocol);
}
public void AddValve()
{
//Arrange
TECValve valve = ModelCreation.TestValve(bid.Catalogs, rand);
valve.AssignRandomScopeProperties(bid.Catalogs, rand);
TECTypical typical = new TECTypical();
bid.Systems.Add(typical);
TECEquipment typEquip = new TECEquipment();
typical.Equipment.Add(typEquip);
TECSubScope typSS = new TECSubScope();
typEquip.SubScope.Add(typSS);
typical.AddInstance();
MaterialSummaryVM matVM = new MaterialSummaryVM(bid, cw);
//Act
typSS.Devices.Add(valve);
//Assert
AssertMaterialVMMatchesCostBatch(matVM, valve.CostBatch);
}
public void DiconnectTest1()
{
TECConnectionType connectionType = new TECConnectionType();
TECDevice compatibleDevice = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>(), new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(compatibleDevice);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
subScope.Points.Add(point);
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(IOType.AI));
TECProvidedController controller = new TECProvidedController(type);
TECHardwiredConnection connection = controller.Connect(subScope, subScope.AvailableProtocols.First(x => x is TECHardwiredProtocol)) as TECHardwiredConnection;
controller.Disconnect(subScope);
Assert.IsFalse(controller.ChildrenConnections.Contains(connection));
Assert.IsNull((subScope as IConnectable).GetParentConnection());
}
public void RemoveDevice()
{
//Arrange
TECTypical typical = new TECTypical();
bid.Systems.Add(typical);
TECEquipment typEquip = new TECEquipment();
typical.Equipment.Add(typEquip);
TECSubScope typSS = new TECSubScope();
typEquip.SubScope.Add(typSS);
TECDevice device = bid.Catalogs.Devices[0];
device.AssignRandomScopeProperties(bid.Catalogs, rand);
typSS.Devices.Add(device);
typical.AddInstance();
MaterialSummaryVM matVM = new MaterialSummaryVM(bid, cw);
CostBatch initial = MatVMToCostBatch(matVM);
//Act
typSS.Devices.Remove(device);
//Assert
AssertMaterialVMMatchesCostBatch(matVM, initial - device.CostBatch);
}
public void UnionizeScopeCollectionTest()
{
TECSubScope scope1 = new TECSubScope();
TECSubScope scope2 = new TECSubScope();
TECSubScope scopeOverwrite = new TECSubScope(scope2.Guid);
TECSubScope scope3 = new TECSubScope();
List <ITECScope> first = new List <ITECScope>()
{
scope1,
scopeOverwrite
};
List <ITECScope> second = new List <ITECScope>()
{
scope2,
scope3
};
CommonUtilities.UnionizeScopeCollection(first, second);
Assert.IsTrue(first.Contains(scope3));
Assert.IsTrue(first.Contains(scope2));
Assert.IsFalse(first.Contains(scopeOverwrite));
}
public void RemoveValve()
{
//Arrange
bid.Catalogs.Add(ModelCreation.TestValve(bid.Catalogs, rand));
ChangeWatcher cw = new ChangeWatcher(bid);
TECTypical typical = new TECTypical();
bid.Systems.Add(typical);
TECEquipment typEquip = new TECEquipment();
typical.Equipment.Add(typEquip);
TECSubScope typSS = new TECSubScope();
typEquip.SubScope.Add(typSS);
TECValve valve = bid.Catalogs.Valves[0];
valve.AssignRandomScopeProperties(bid.Catalogs, rand);
typSS.Devices.Add(valve);
typical.AddInstance();
MaterialSummaryVM matVM = new MaterialSummaryVM(bid, cw);
CostBatch initial = MatVMToCostBatch(matVM);
//Act
typSS.Devices.Remove(valve);
//Assert
AssertMaterialVMMatchesCostBatch(matVM, initial - valve.CostBatch);
}
public void AddDeviceToConnectedHardwired()
{
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(IOType.AI));
TECProvidedController controller = new TECProvidedController(type);
TECConnectionType connectionType = new TECConnectionType();
TECDevice device = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>(), new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.AddDevice(device);
controller.Connect(subScope, subScope.HardwiredProtocol());
TECDevice otherDevice = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>(), new TECManufacturer());
subScope.AddDevice(otherDevice);
Assert.IsFalse(subScope.Devices.Contains(otherDevice));
TECConnectionType otherConnectionType = new TECConnectionType();
TECDevice nextDevice = new TECDevice(new List <TECConnectionType> {
otherConnectionType
}, new List <TECProtocol>(), new TECManufacturer());
bool deviceAdded = subScope.AddDevice(nextDevice);
Assert.IsFalse(deviceAdded);
Assert.IsFalse(subScope.Devices.Contains(nextDevice));
}
public void RemoveSubScope()
{
//Arrange
TECTypical typical = new TECTypical();
bid.Systems.Add(typical);
TECEquipment typEquip = new TECEquipment();
typical.Equipment.Add(typEquip);
TECSubScope subScope = ModelCreation.TestSubScope(bid.Catalogs, rand);
subScope.AssignRandomScopeProperties(bid.Catalogs, rand);
typEquip.SubScope.Add(subScope);
typical.AddInstance();
MaterialSummaryVM matVM = new MaterialSummaryVM(bid, cw);
CostBatch initial = MatVMToCostBatch(matVM);
//Act
typEquip.SubScope.Remove(subScope);
//Assert
AssertMaterialVMMatchesCostBatch(matVM, initial - subScope.CostBatch);
}
public void RemovePointFromConnectedHardwired()
{
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(IOType.AI));
TECProvidedController controller = new TECProvidedController(type);
TECConnectionType connectionType = new TECConnectionType();
TECDevice device = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>(), new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(device);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
subScope.AddPoint(point);
controller.Connect(subScope, subScope.HardwiredProtocol());
subScope.RemovePoint(point);
Assert.IsFalse(subScope.Points.Contains(point));
Assert.IsTrue(controller.AvailableIO.IONumber(IOType.AI) == 1);
}
public void CompatibleProtocolsTest()
{
TECProtocol firstProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol secondProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol thirdProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol fourthProtocol = new TECProtocol(new List <TECConnectionType>());
TECDevice compatibleDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol>()
{
secondProtocol, firstProtocol
}, new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(compatibleDevice);
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(firstProtocol));
type.IO.Add(new TECIO(secondProtocol));
type.IO.Add(new TECIO(thirdProtocol));
TECProvidedController controller = new TECProvidedController(type);
var compatible = controller.CompatibleProtocols(subScope);
Assert.AreEqual(2, compatible.Count);
Assert.IsTrue(compatible.Contains(firstProtocol) && compatible.Contains(secondProtocol));
}
public void AvailableProtocols2()
{
TECSubScope ss = new TECSubScope();
Assert.IsFalse(ss.AvailableProtocols.Any(prot => { return(prot is TECHardwiredProtocol); }));
Assert.AreEqual(0, ss.AvailableProtocols.Count);
}
public void CompatibleProtocolsTest2()
{
TECConnectionType connectionType = new TECConnectionType();
TECDevice compatibleDevice = new TECDevice(new List <TECConnectionType> {
connectionType
}, new List <TECProtocol>(), new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(compatibleDevice);
TECPoint point = new TECPoint();
point.Type = IOType.AI;
subScope.Points.Add(point);
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(IOType.AI));
TECProvidedController controller = new TECProvidedController(type);
var compatible = controller.CompatibleProtocols(subScope);
Assert.AreEqual(1, compatible.Count);
Assert.IsTrue(compatible.Any(x => x is TECHardwiredProtocol));
}
public AddSubScopeVM(Action <TECSubScope> addMethod, TECScopeManager scopeManager) : base(scopeManager)
{
add = addMethod;
toAdd = new TECSubScope();
setup();
PropertiesVM.DisplayReferenceProperty = false;
}
public void ConnectTest1()
{
TECProtocol firstProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol secondProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol thirdProtocol = new TECProtocol(new List <TECConnectionType>());
TECProtocol fourthProtocol = new TECProtocol(new List <TECConnectionType>());
TECDevice compatibleDevice = new TECDevice(new List <TECConnectionType>(), new List <TECProtocol>()
{
fourthProtocol
}, new TECManufacturer());
TECSubScope subScope = new TECSubScope();
subScope.Devices.Add(compatibleDevice);
TECControllerType type = new TECControllerType(new TECManufacturer());
type.IO.Add(new TECIO(firstProtocol));
type.IO.Add(new TECIO(secondProtocol));
type.IO.Add(new TECIO(thirdProtocol));
TECProvidedController controller = new TECProvidedController(type);
var connection = controller.Connect(subScope, firstProtocol);
Assert.IsNull(connection);
}
public void SaveAs_Bid_SubScope()
{
//Arrange
TECBid bid = new TECBid();
bid.Catalogs = ModelCreation.TestCatalogs(rand, 5);
TECTypical system = new TECTypical();
TECEquipment expectedEquipment = new TECEquipment();
TECSubScope expectedSubScope = ModelCreation.TestSubScope(bid.Catalogs, rand);
expectedEquipment.SubScope.Add(expectedSubScope);
system.Equipment.Add(expectedEquipment);
bid.Systems.Add(system);
path = Path.GetTempFileName();
//Act
DatabaseManager <TECBid> manager = new DatabaseManager <TECBid>(path);
manager.New(bid);
TECBid loadedBid = manager.Load() as TECBid;
TECSubScope actualSubScope = loadedBid.FindChild(expectedSubScope.Guid) as TECSubScope;
//Assert
Assert.AreEqual(expectedSubScope.Name, actualSubScope.Name);
Assert.AreEqual(expectedSubScope.Description, actualSubScope.Description);
Assert.AreEqual(expectedSubScope.Interlocks.Count, actualSubScope.Interlocks.Count);
Assert.AreEqual(expectedSubScope.ScopeBranches.Count, actualSubScope.ScopeBranches.Count);
Assert.IsTrue(compareCosts(expectedSubScope.CostBatch, actualSubScope.CostBatch));
}
public void TemplatedSubScopeRemovedFromTemplateEquipment()
{
//Arrange
TECTemplates templates = new TECTemplates();
TemplateSynchronizer <TECEquipment> equipSynchronizer = templates.EquipmentSynchronizer;
TemplateSynchronizer <TECSubScope> ssSynchronizer = templates.SubScopeSynchronizer;
TECEquipment templateEquip = new TECEquipment();
templates.Templates.EquipmentTemplates.Add(templateEquip);
TECSubScope templateSS = new TECSubScope();
templates.Templates.SubScopeTemplates.Add(templateSS);
TECSubScope instanceSS = ssSynchronizer.NewItem(templateSS);
templateEquip.SubScope.Add(instanceSS);
TECEquipment instanceEquip = equipSynchronizer.NewItem(templateEquip);
templates.Templates.EquipmentTemplates.Add(instanceEquip);
//Act
templateEquip.SubScope.Remove(instanceSS);
//Assert
Assert.IsTrue(instanceEquip.SubScope.Count == 0, "SubScope not removed properly from equipment reference.");
Assert.IsFalse(ssSynchronizer.Contains(instanceSS), "Reference SubScope not removed properly from synchronizer.");
Assert.IsTrue(ssSynchronizer.Contains(templateSS), "Template SubScope was removed from synchronizer when it shouldn't have been.");
}
