private static void CreateDimension(Point3d CommonDimPos, Point3d[] dimPos,
Direction dimDir)
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Database dBase = doc.Database;
using (Transaction acTrans = doc.TransactionManager.StartTransaction())
{
BlockTable blockTable1;
blockTable1 = acTrans.GetObject(dBase.BlockTableId, OpenMode.ForRead) as BlockTable;
BlockTableRecord recBT;
recBT = acTrans.GetObject(blockTable1[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord;
for (int i = 0; i < +dimPos.Length; i++)
{
Point3d dimOrigin = new Point3d( );
double rotationAng = 0;
double offsetFactor = i + 1.5;
if (dimDir == Direction.Horizontal)
{
dimOrigin = new Point3d((CommonDimPos.X + dimPos[i].X) / 2, dimPos[i].Y + offsetFactor * pipeRadius, 0);
if (bendAngle == 90)
{
rotationAng = System.Math.PI;
}
else
{
rotationAng = 1.25 * System.Math.PI;
}
}
else
{
dimOrigin = new Point3d(CommonDimPos.X - offsetFactor * pipeRadius, (dimPos[i].Y + dimPos[i].Y) / 2, 0);
rotationAng = 0.5 * System.Math.PI;
}
RotatedDimension rotatedDim = new RotatedDimension();
rotatedDim.SetDatabaseDefaults();
rotatedDim.XLine1Point = CommonDimPos;
rotatedDim.XLine2Point = dimPos[i];
rotatedDim.DimLinePoint = dimOrigin;
rotatedDim.DimensionStyle = dBase.Dimstyle;
rotatedDim.Rotation = rotationAng;
rotatedDim.Layer = "IE_Object_Layer";
recBT.AppendEntity(rotatedDim);
acTrans.AddNewlyCreatedDBObject(rotatedDim, true);
}
acTrans.Commit();
}
}
private void button1_Click(object sender, EventArgs e)
{
// Declare the input variables
double intDia = double.Parse(textBox_intDia.Text);
double extDia = double.Parse(textBox_extDia.Text);
double height = double.Parse(textBox_height.Text);
double crossSection = (extDia - intDia) * 0.5;
// Boolean : Endless/Split
Boolean endless = true;
Boolean split = false;
// Input validation
Boolean isDataValidated = true;
// Get the document object
Document doc = Autodesk.AutoCAD.ApplicationServices.Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
///// Transferred to the class Global.cs
//// Prompt for the insertion point
//PromptPointResult insertPointResult;
//PromptPointOptions insertPointOption = new PromptPointOptions("");
//insertPointOption.Message = "\nClick the point where you want to insert the profile UN : ";
//insertPointResult = doc.Editor.GetPoint(insertPointOption);
//Point3d insertPoint = insertPointResult.Value;
//// Exit if the user presses ESC or cancels the command
//if (insertPointResult.Status == PromptStatus.Cancel) return;
////// DATA VALIDATION ///////////////////////////////////////////
// int Dia. > ext Dia.
if (intDia >= extDia)
{
labelWarning.Text = "int.Diameter must be smaller than ext.Diameter!";
isDataValidated = false;
}
// too low height
if (height <= 3)
{
labelWarning.Text = "Height is too small!";
isDataValidated = false;
}
// too high height
if (height > 45)
{
labelWarning.Text = "Height is too big!";
isDataValidated = false;
}
// Feasible range
if (crossSection < 5 || crossSection > 35)
{
labelWarning.Text = "Cross-section is out of range!\n(5 <= F <= 35)";
isDataValidated = false;
}
// Null input
// Internal diameter (Null)
if (string.IsNullOrEmpty(this.textBox_intDia.Text))
{
labelWarning.Text = "Please insert the value of int.Diameter!";
isDataValidated = false;
}
// External diameter (Null)
if (string.IsNullOrEmpty(this.textBox_extDia.Text))
{
labelWarning.Text = "Please insert the value of ext.Diameter!";
isDataValidated = false;
}
// Height (Null)
if (string.IsNullOrEmpty(this.textBox_height.Text))
{
labelWarning.Text = "Please insert the value of the height!";
isDataValidated = false;
}
// Process futher only if all the condition has been met
// Prompt for the insertion point
if (isDataValidated == true)
{
this.Hide();
Global.Point.getInsertionPoint("\nClick the point where you want to insert the profile : ", doc);
}
// Locking the document
using (DocumentLock docLock = doc.LockDocument())
{
// Transaction
using (Transaction trans = db.TransactionManager.StartTransaction())
{
try
{
BlockTable bt;
bt = trans.GetObject(db.BlockTableId, OpenMode.ForRead) as BlockTable;
BlockTableRecord btr;
btr = trans.GetObject(bt[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord;
double insertPointX = Global.Point.insertPoint.X;
double insertPointY = Global.Point.insertPoint.Y;
Point3d insertPoint = new Point3d(insertPointX, insertPointY, 0);
// Define the dimensions of tacche
// Dimensions are according to TAB_27
double dimB = 1;
double dimD = 1;
if (crossSection >= 5 && crossSection <= 7.5)
{
dimB = 1.5;
dimD = 1.5;
}
else if (crossSection > 7.5 && crossSection < 12.5)
{
dimB = 2;
dimD = 1.5;
}
else if (crossSection >= 12.5 && crossSection < 15)
{
dimB = 2.5;
dimD = 1.5;
}
else if (crossSection >= 15 && crossSection < 17.5)
{
dimB = 3;
dimD = 1.5;
}
else if (crossSection >= 17.5 && crossSection < 22)
{
dimB = 3.5;
dimD = 2;
}
else if (crossSection >= 22 && crossSection < 27.6)
{
dimB = 3.5;
dimD = 2.5;
}
else if (crossSection >= 27.6)
{
dimB = 3.5;
dimD = 3;
}
else
{
dimB = 4;
dimD = 3.5;
}
// Number of tacche
double numTacche = 2;
if (extDia <= 300)
{
numTacche = 2;
}
else if (extDia > 300 && extDia <= 500)
{
numTacche = 4;
}
else if (extDia > 500 && extDia <= 700)
{
numTacche = 6;
}
else if (extDia > 700 && extDia <= 1100)
{
numTacche = 8;
}
else if (extDia > 1100 && extDia <= 1500)
{
numTacche = 12;
}
else if (extDia > 1500)
{
numTacche = 16;
}
else
{
numTacche = 20;
}
// Define the dimension of the bottom height
// dimE = total height - height imp (altezzaColl)
double dimE = 1;
if (crossSection <= 7.5)
{
dimE = 2;
}
else if (crossSection > 7.5 && crossSection < 10)
{
dimE = 2.5;
}
else if (crossSection >= 10 && crossSection < 12.5)
{
dimE = 3;
}
else if (crossSection >= 12.5 && crossSection < 15)
{
dimE = 3.5;
}
else if (crossSection >= 15 && crossSection < 17.5)
{
dimE = 4;
}
else if (crossSection >= 17.5 && crossSection < 20)
{
dimE = 4.5;
}
else if (crossSection >= 20 && crossSection < 22.5)
{
dimE = 5;
}
else if (crossSection >= 22.5 && crossSection < 25)
{
dimE = 5.5;
}
else if (crossSection >= 25 && crossSection < 27.5)
{
dimE = 6;
}
else if (crossSection >= 27.5 && crossSection < 30)
{
dimE = 6.5;
}
else if (crossSection >= 30 && crossSection < 32.5)
{
dimE = 7;
}
else if (crossSection >= 32.5 && crossSection < 35)
{
dimE = 7.5;
}
else
{
dimE = 8;
}
// Fascia gap
/////////////////////// To be defined x = Fnom-Fcoll.
double fasciaGap = 1;
if (crossSection <= 8)
{
fasciaGap = 0.4;
}
else if (crossSection > 8 && crossSection < 10)
{
fasciaGap = 0.5;
}
else if (crossSection >= 10 && crossSection < 10.6)
{
fasciaGap = 0.6;
}
else if (crossSection >= 10.6 && crossSection < 14)
{
fasciaGap = 0.8;
}
else if (crossSection >= 14 && crossSection < 20.1)
{
fasciaGap = 1;
}
else if (crossSection >= 20.1 && crossSection < 23.9)
{
fasciaGap = 1.2;
}
else if (crossSection >= 23.9 && crossSection < 26.1)
{
fasciaGap = 1.3;
}
else if (crossSection >= 26.1 && crossSection < 27.6)
{
fasciaGap = 1.4;
}
else if (crossSection >= 27.6 && crossSection < 30.1)
{
fasciaGap = 1.5;
}
else if (crossSection >= 30.1 && crossSection < 35.1)
{
fasciaGap = 1.6;
}
else
{
fasciaGap = 1.8;
}
// Calculate each point of the profile
double point2X = insertPointX;
double point2Y = insertPointY - dimB;
double point3X = insertPointX - dimD;
double point3Y = point2Y;
double point4X = point3X;
double point4Y = point3Y - (height - dimB);
double point5X = point4X;
double point5Y = point4Y - (dimE / Math.Sin((45 * (Math.PI / 180))));
double point10X = insertPointX + (crossSection - fasciaGap - (2 * dimD));
double point10Y = insertPointY;
double point9X = point10X;
double point9Y = point10Y - dimB;
double point8X = point9X + dimD;
double point8Y = point9Y;
double point7X = point8X;
double point7Y = point4Y;
double point6X = point7X;
double point6Y = point7Y - (dimE / Math.Sin((45 * (Math.PI / 180))));
// Create the points with the X,Y point values above
Point3d point2 = new Point3d(point2X, point2Y, 0);
Point3d point3 = new Point3d(point3X, point3Y, 0);
Point3d point4 = new Point3d(point4X, point4Y, 0);
Point3d point5 = new Point3d(point5X, point5Y, 0);
Point3d point6 = new Point3d(point6X, point6Y, 0);
Point3d point7 = new Point3d(point7X, point7Y, 0);
Point3d point8 = new Point3d(point8X, point8Y, 0);
Point3d point9 = new Point3d(point9X, point9Y, 0);
Point3d point10 = new Point3d(point10X, point10Y, 0);
//// point5 & point 6 shall be rotated 45°/-45°
//Matrix3d currentMatrix = doc.Editor.CurrentUserCoordinateSystem;
//CoordinateSystem3d crdSystem = currentMatrix.CoordinateSystem3d;
//point5.TransformBy(Matrix3d.Rotation(45 * (Math.PI / 180), crdSystem.Zaxis, point4));
//point6.TransformBy(Matrix3d.Rotation(-45 * (Math.PI / 180), crdSystem.Zaxis, point7));
//// Draw the profile as polyline
//using (Polyline pl = new Polyline())
//{
// pl.AddVertexAt(0, new Point2d(point7X, point7Y), 0, 0, 0);
// pl.AddVertexAt(1, new Point2d(point8X, point8Y), 0, 0, 0);
// pl.AddVertexAt(2, new Point2d(point9X, point9Y), 0, 0, 0);
// pl.AddVertexAt(3, new Point2d(point10X, point10Y), 0, 0, 0);
// pl.AddVertexAt(4, new Point2d(insertPointX, insertPointY), 0, 0, 0);
// pl.AddVertexAt(5, new Point2d(point2X, point2Y), 0, 0, 0);
// pl.AddVertexAt(6, new Point2d(point3X, point3Y), 0, 0, 0);
// pl.AddVertexAt(7, new Point2d(point4X, point4Y), 0, 0, 0);
// pl.AddVertexAt(8, new Point2d(point5X, point5Y), 0, 0, 0);
// pl.AddVertexAt(9, new Point2d(point6X, point6Y), 0, 0, 0);
// pl.Closed = true;
// //pl.ColorIndex = 1;
// pl.SetDatabaseDefaults();
// btr.AppendEntity(pl);
// trans.AddNewlyCreatedDBObject(pl, true);
//}
// Draw the profile section
Line ln12 = new Line(insertPoint, point2);
Line ln23 = new Line(point2, point3);
Line ln34 = new Line(point3, point4);
Line ln45 = new Line(point4, point5);
//Line ln56 = new Line(point5, point6);
Line ln67 = new Line(point6, point7);
Line ln78 = new Line(point7, point8);
Line ln89 = new Line(point8, point9);
Line ln910 = new Line(point9, point10);
Line ln101 = new Line(point10, insertPoint);
// Point 5 & 6 shall be roated 45° / -45°
double pointRotated5X = point5X + dimE;
double pointRotated5Y = point5Y + (dimE / Math.Sin((45 * (Math.PI / 180)))) - dimE;
double pointRotated6X = point6X - dimE;
double pointRotated6Y = point6Y + (dimE / Math.Sin((45 * (Math.PI / 180)))) - dimE;
Point3d pointRotated5 = new Point3d(pointRotated5X, pointRotated5Y, 0);
Point3d pointRotated6 = new Point3d(pointRotated6X, pointRotated6Y, 0);
Line ln56 = new Line(pointRotated5, pointRotated6);
// Plot
Line[] profileLineArray1 = new Line[] { ln12, ln23, ln34, ln56, ln78, ln89, ln910, ln101 };
for (int i = 0; i < 8; i++)
{
btr.AppendEntity(profileLineArray1[i]);
trans.AddNewlyCreatedDBObject(profileLineArray1[i], true);
}
// ln45 & ln67 shall be rotated 45°/-45°
Matrix3d currentMatrix = doc.Editor.CurrentUserCoordinateSystem;
CoordinateSystem3d crdSystem = currentMatrix.CoordinateSystem3d;
ln45.TransformBy(Matrix3d.Rotation(45 * (Math.PI / 180), crdSystem.Zaxis, point4));
ln67.TransformBy(Matrix3d.Rotation(-45 * (Math.PI / 180), crdSystem.Zaxis, point7));
// Plot rotated 2 lines : ln45 & ln67
ln45.SetDatabaseDefaults();
btr.AppendEntity(ln45);
trans.AddNewlyCreatedDBObject(ln45, true);
ln67.SetDatabaseDefaults();
btr.AppendEntity(ln67);
trans.AddNewlyCreatedDBObject(ln67, true);
// Profile line layer (Disegno)
Line[] profileLineArray2 = new Line[] { ln12, ln23, ln34, ln45, ln56, ln67, ln78, ln89, ln910, ln101 };
for (int i = 0; i < 10; i++)
{
profileLineArray2[i].Layer = "DISEGNO";
}
// Center line (Axis)
double axisPoint1X = point8X + 10 + (crossSection * 0.75); // 10 = length of tacche
double axisPoint2X = point8X + 10 + (crossSection * 0.75); // 10 = length of tacche
double axisPoint3X = point8X + 10 + (crossSection * 0.75); // 10 = length of tacche
double axisPoint4X = point8X + 10 + (crossSection * 0.75); // 10 = length of tacche
double axisPoint1Y = point10Y;
double axisPoint2Y = point8Y;
double axisPoint3Y = point7Y;
double axisPoint4Y = point7Y - dimE;
Point3d pointCnt1 = new Point3d(axisPoint1X, axisPoint1Y, 0);
Point3d pointCnt2 = new Point3d(axisPoint2X, axisPoint2Y, 0);
Point3d pointCnt3 = new Point3d(axisPoint3X, axisPoint3Y, 0);
Point3d pointCnt4 = new Point3d(axisPoint4X, axisPoint4Y, 0);
// Tacche
// Calculate each point of tacche
// X value
double pointTacche1X = point10X + (crossSection * 0.5);
double pointTacche2X = pointTacche1X;
double pointTacche3X = point10X + (crossSection * 0.5) + 10;
double pointTacche4X = pointTacche3X;
// Y value
double pointTacche1Y = point10Y;
double pointTacche2Y = pointTacche1Y - dimB;
double pointTacche3Y = pointTacche2Y;
double pointTacche4Y = pointTacche1Y;
// Tacche points
Point3d pointTacche1 = new Point3d(pointTacche1X, pointTacche1Y, 0);
Point3d pointTacche2 = new Point3d(pointTacche2X, pointTacche2Y, 0);
Point3d pointTacche3 = new Point3d(pointTacche3X, pointTacche3Y, 0);
Point3d pointTacche4 = new Point3d(pointTacche4X, pointTacche4Y, 0);
// Center lines
// Profile lines to the center line
Line lnCnt11 = new Line(point10, pointTacche1);
Line lnCnt12 = new Line(pointTacche4, pointCnt1);
Line lnCnt21 = new Line(point8, pointTacche2);
Line lnCnt22 = new Line(pointTacche3, pointCnt2);
Line lnCnt3 = new Line(point7, pointCnt3);
Line lnCnt4 = new Line(pointRotated6, pointCnt4);
// Plot + Layer
Line[] centerLineArray = new Line[] { lnCnt11, lnCnt12, lnCnt21, lnCnt22, lnCnt3, lnCnt4 };
for (int i = 0; i < 6; i++)
{
btr.AppendEntity(centerLineArray[i]);
trans.AddNewlyCreatedDBObject(centerLineArray[i], true);
centerLineArray[i].Layer = "DISEGNO";
}
// Tacche
// Tacche lines
Line lnTacche2 = new Line(pointTacche1, pointTacche2);
Line lnTacche3 = new Line(pointTacche2, pointTacche3);
Line lnTacche4 = new Line(pointTacche3, pointTacche4);
// Plot + Layer
Line[] taccheLineArray = new Line[] { lnTacche2, lnTacche3, lnTacche4 };
for (int i = 0; i < 3; i++)
{
btr.AppendEntity(taccheLineArray[i]);
trans.AddNewlyCreatedDBObject(taccheLineArray[i], true);
taccheLineArray[i].Layer = "DISEGNO";
}
// Axis line in drawing
// Calculate 2 points
double pointAxisDwg1X = axisPoint1X;
double pointAxisDwg2X = axisPoint1X;
double pointAxisDwg1Y = axisPoint1Y + dimB;
double pointAxisDwg2Y = axisPoint4Y - dimB;
// Axis line in drawing point3d
Point3d pointAxisDwg1 = new Point3d(pointAxisDwg1X, pointAxisDwg1Y, 0);
Point3d pointAxisDwg2 = new Point3d(pointAxisDwg2X, pointAxisDwg2Y, 0);
// Draw the line
Line axisLineDwg = new Line(pointAxisDwg1, pointAxisDwg2);
btr.AppendEntity(axisLineDwg);
trans.AddNewlyCreatedDBObject(axisLineDwg, true);
// Line layer (Assi)
axisLineDwg.Layer = "ASSI";
// Actual axis line
// ENDLESS/SPLIT selection
double endlessSplit = 0;
string endlessText = "";
string splitText = "";
if (radioButton_endless.Checked == true)
{
endlessSplit = 0;
endless = true;
endlessText = "Endless (Intera)";
}
else if (radioButton_split.Checked == true)
{
endlessSplit = 0.5;
split = true;
splitText = "Double splits";
}
// Calculate 2 points
double pointAxisReal1X = ((point3X + point8X) * 0.5) + ((intDia + extDia) * 0.25) + endlessSplit;
double pointAxisReal1Y = pointAxisDwg1Y;
double pointAxisReal2X = pointAxisReal1X;
double pointAxisReal2Y = pointAxisDwg2Y;
// point
Point3d pointAxisReal1 = new Point3d(pointAxisReal1X, pointAxisReal1Y, 0);
Point3d pointAxisReal2 = new Point3d(pointAxisReal2X, pointAxisReal2Y, 0);
Line lnAxisReal = new Line(pointAxisReal1, pointAxisReal2);
btr.AppendEntity(lnAxisReal);
trans.AddNewlyCreatedDBObject(lnAxisReal, true);
// Line layer (Assi)
lnAxisReal.Layer = "DEFPOINTS";
// Create the aligned dimension //////////////////////////////////////////////////////
// Tolerance variables
double tollFascia = 0.1;
double tollAltezzaColl = 0.1;
double tollAltezzaTotal = 0.1;
// Cross-section tolerance range (F = 15)
if ((point8X - point3X) < 15)
{
tollFascia = 0.1;
}
else if ((point8X - point3X) >= 15)
{
tollFascia = 0.15;
}
// Altezza Coll. (Height imp)
if ((insertPointY - point4Y) < 15)
{
tollAltezzaColl = 0.1;
}
else if ((insertPointY - point4Y) >= 15)
{
tollAltezzaColl = 0.15;
}
// Altezza total (Total height)
if ((insertPointY - pointRotated5Y) < 15)
{
tollAltezzaTotal = 0.1;
}
else if ((insertPointY - pointRotated5Y) >= 15)
{
tollAltezzaTotal = 0.15;
}
// Open the dimension style and set it to "P"
DimStyleTableRecord dstr = new DimStyleTableRecord();
DimStyleTable dst = trans.GetObject(db.DimStyleTableId, OpenMode.ForRead) as DimStyleTable;
ObjectId dimStyleP = dst["P"];
doc.Database.Dimstyle = dimStyleP;
// Fascia Coll
RotatedDimension fasciaColl = new RotatedDimension();
fasciaColl.SetDatabaseDefaults();
fasciaColl.XLine1Point = point8;
fasciaColl.XLine2Point = point3;
fasciaColl.DimLinePoint = new Point3d(0, insertPointY + (dimB * 2.8), 0);
fasciaColl.Layer = "QUOTE";
fasciaColl.DimensionStyle = doc.Database.Dimstyle;
// Tolerance
fasciaColl.Dimtol = true;
fasciaColl.Dimtp = tollFascia;
fasciaColl.Dimtm = tollFascia;
// Add the new object to Model space and the transaction
btr.AppendEntity(fasciaColl);
trans.AddNewlyCreatedDBObject(fasciaColl, true);
// Dimension D (TAB_27)
RotatedDimension dimensionD = new RotatedDimension();
dimensionD.SetDatabaseDefaults();
dimensionD.XLine1Point = point3;
dimensionD.XLine2Point = insertPoint;
dimensionD.DimLinePoint = new Point3d(0, insertPointY + (dimB * 1.25), 0);
dimensionD.Layer = "QUOTE";
dimensionD.DimensionStyle = doc.Database.Dimstyle;
// Add the new object to Model space and the transaction
btr.AppendEntity(dimensionD);
trans.AddNewlyCreatedDBObject(dimensionD, true);
// Dimension B (TAB_27)
RotatedDimension dimensionB = new RotatedDimension();
dimensionB.SetDatabaseDefaults();
dimensionB.XLine1Point = insertPoint;
dimensionB.XLine2Point = point3;
dimensionB.Rotation = Math.PI / 2;
dimensionB.DimLinePoint = new Point3d(point3X - (dimD * 1.5), 0, 0);
dimensionB.Layer = "QUOTE";
dimensionB.DimensionStyle = doc.Database.Dimstyle;
// Add the new object to Model space and the transaction
btr.AppendEntity(dimensionB);
trans.AddNewlyCreatedDBObject(dimensionB, true);
// Altezza coll (height)
RotatedDimension altezzaColl = new RotatedDimension();
altezzaColl.SetDatabaseDefaults();
altezzaColl.XLine1Point = insertPoint;
altezzaColl.XLine2Point = point4;
altezzaColl.Rotation = Math.PI / 2;
altezzaColl.DimLinePoint = new Point3d(point3X - (dimD * 2.8), (point3Y + point4Y) * 0.5, 0);
altezzaColl.Layer = "QUOTE";
altezzaColl.DimensionStyle = doc.Database.Dimstyle;
// Tolerance
altezzaColl.Dimtol = true;
altezzaColl.Dimtp = tollAltezzaColl;
altezzaColl.Dimtm = tollAltezzaColl;
// Add the new object to Model space and the transaction
btr.AppendEntity(altezzaColl);
trans.AddNewlyCreatedDBObject(altezzaColl, true);
// Altezza total (total height)
RotatedDimension altezzaTotal = new RotatedDimension();
altezzaTotal.SetDatabaseDefaults();
altezzaTotal.XLine1Point = insertPoint;
altezzaTotal.XLine2Point = pointRotated5;
altezzaTotal.Rotation = Math.PI / 2;
altezzaTotal.DimLinePoint = new Point3d(point3X - (dimD * 4.15), (insertPointY + pointRotated5Y) * 0.5, 0);
altezzaTotal.Layer = "QUOTE";
altezzaTotal.DimensionStyle = doc.Database.Dimstyle;
// Tolerance
altezzaTotal.Dimtol = true;
altezzaTotal.Dimtp = tollAltezzaTotal;
altezzaTotal.Dimtm = tollAltezzaTotal;
// Add the new object to Model space and the transaction
btr.AppendEntity(altezzaTotal);
trans.AddNewlyCreatedDBObject(altezzaTotal, true);
// Tacche (Dimension A = 10, TAB_27)
RotatedDimension dimensionA = new RotatedDimension();
dimensionA.SetDatabaseDefaults();
dimensionA.XLine1Point = pointTacche1;
dimensionA.XLine2Point = pointTacche4;
dimensionA.DimLinePoint = new Point3d(0, insertPointY + (dimB * 1.25), 0);
dimensionA.Layer = "QUOTE";
dimensionA.DimensionStyle = doc.Database.Dimstyle;
// Add the new object to Model space and the transaction
btr.AppendEntity(dimensionA);
trans.AddNewlyCreatedDBObject(dimensionA, true);
// Create an angular dimension (90°)
LineAngularDimension2 acLinAngDim = new LineAngularDimension2();
acLinAngDim.SetDatabaseDefaults();
acLinAngDim.XLine1Start = point4;
acLinAngDim.XLine1End = pointRotated5;
acLinAngDim.XLine2Start = pointRotated6;
acLinAngDim.XLine2End = point7;
acLinAngDim.ArcPoint = new Point3d((point4X + point7X) * 0.5, point4Y + 2, 0);
acLinAngDim.Layer = "QUOTE";
acLinAngDim.DimensionStyle = doc.Database.Dimstyle;
// Add the new object to Model space and the transaction
btr.AppendEntity(acLinAngDim);
trans.AddNewlyCreatedDBObject(acLinAngDim, true);
// External diameter coll.
// Diameter dimensions (P-D2)
ObjectId dimStylePD2 = dst["P-D2"];
RotatedDimension extDiaColl = new RotatedDimension();
extDiaColl.SetDatabaseDefaults();
extDiaColl.XLine1Point = new Point3d(pointAxisReal1X, point8Y, 0);
extDiaColl.XLine2Point = point3;
extDiaColl.DimLinePoint = new Point3d(point8X, insertPointY + (dimB * 4.05), 0);
extDiaColl.Layer = "QUOTE";
doc.Database.Dimstyle = dimStylePD2;
extDiaColl.DimensionStyle = doc.Database.Dimstyle;
// Tolerance
// External diameter
extDiaColl.Dimtol = true;
double tollExtDia = 1;
if (split == true)
{
if (((pointAxisReal1X - point3X) * 2) <= 1000)
{
extDiaColl.Dimtp = 1;
extDiaColl.Dimtm = 0;
}
else if (((pointAxisReal1X - point3X) * 2) > 1000)
{
tollExtDia = Math.Round(extDia * 0.001, 2);
extDiaColl.Dimtp = tollExtDia;
extDiaColl.Dimtm = 0;
}
}
else if (endless == true)
{
if (((pointAxisReal1X - point3X) * 2) > 600)
{
tollExtDia = extDia * 0.001;
extDiaColl.Dimtp = tollExtDia;
extDiaColl.Dimtm = 0;
}
else if (((pointAxisReal1X - point3X) * 2) <= 200)
{
tollExtDia = 0.15;
extDiaColl.Dimtp = tollExtDia;
extDiaColl.Dimtm = tollExtDia;
}
else if (((pointAxisReal1X - point3X) * 2) > 200 && ((pointAxisReal1X - point3X) * 2) <= 400)
{
tollExtDia = 0.2;
extDiaColl.Dimtp = tollExtDia;
extDiaColl.Dimtm = tollExtDia;
}
else if (((pointAxisReal1X - point3X) * 2) > 400 && ((pointAxisReal1X - point3X) * 2) <= 600)
{
tollExtDia = 0.25;
extDiaColl.Dimtp = tollExtDia;
extDiaColl.Dimtm = tollExtDia;
}
}
// Add the new object to Model space and the transaction
btr.AppendEntity(extDiaColl);
trans.AddNewlyCreatedDBObject(extDiaColl, true);
// Diameter at point5
RotatedDimension diaPoint5 = new RotatedDimension();
diaPoint5.SetDatabaseDefaults();
diaPoint5.XLine1Point = new Point3d(pointAxisReal1X, pointRotated5Y, 0);
diaPoint5.XLine2Point = pointRotated5;
diaPoint5.DimLinePoint = new Point3d(pointRotated5X, pointRotated5Y - (dimB * 2.2), 0);
diaPoint5.Layer = "QUOTE";
doc.Database.Dimstyle = dimStylePD2;
diaPoint5.DimensionStyle = doc.Database.Dimstyle;
// Add the new object to Model space and the transaction
btr.AppendEntity(diaPoint5);
trans.AddNewlyCreatedDBObject(diaPoint5, true);
// Diameter at point6
RotatedDimension diaPoint6 = new RotatedDimension();
diaPoint6.SetDatabaseDefaults();
diaPoint6.XLine1Point = new Point3d(pointAxisReal1X, pointRotated6Y, 0);
diaPoint6.XLine2Point = pointRotated6;
diaPoint6.DimLinePoint = new Point3d(pointRotated6X, pointRotated6Y - (dimB * 1.2), 0);
diaPoint6.Layer = "QUOTE";
doc.Database.Dimstyle = dimStylePD2;
diaPoint6.DimensionStyle = doc.Database.Dimstyle;
// Add the new object to Model space and the transaction
btr.AppendEntity(diaPoint6);
trans.AddNewlyCreatedDBObject(diaPoint6, true);
// Internal diameter coll.
RotatedDimension intDiaColl = new RotatedDimension();
intDiaColl.SetDatabaseDefaults();
intDiaColl.XLine1Point = new Point3d(pointAxisReal1X, point8Y, 0);
intDiaColl.XLine2Point = point8;
intDiaColl.DimLinePoint = new Point3d(point8X, insertPointY + (dimB * 2.8), 0);
// Override the dimension (ref.)
intDiaColl.DimensionText = "(<>)";
//acRotDim.DimensionStyle = acCurDb.Dimstyle;
intDiaColl.Layer = "QUOTE";
doc.Database.Dimstyle = dimStylePD2;
intDiaColl.DimensionStyle = doc.Database.Dimstyle;
// Add the new object to Model space and the transaction
btr.AppendEntity(intDiaColl);
trans.AddNewlyCreatedDBObject(intDiaColl, true);
// Get the dimension style from P-D2 to P
doc.Database.Dimstyle = dimStyleP;
///// Create the leader ///////////////////////////////////////////////////////
Leader leader = new Leader();
leader.SetDatabaseDefaults();
leader.AppendVertex(new Point3d(pointTacche2X + 2, pointTacche2Y, 0));
// Verify the space for leader text
if ((point8Y - point7Y) >= 6.5)
{
leader.AppendVertex(new Point3d(pointTacche2X + 2, pointTacche2Y - dimB, 0));
leader.AppendVertex(new Point3d(pointTacche2X + 3, pointTacche2Y - dimB, 0));
}
else if ((point8Y - point7Y) < 6.5)
{
leader.AppendVertex(new Point3d(pointTacche2X + 2, pointRotated6Y - dimB, 0));
leader.AppendVertex(new Point3d(pointTacche2X + 3, pointRotated6Y - dimB, 0));
}
leader.HasArrowHead = true;
leader.Layer = "QUOTE";
// Add the new object to Model space and the transaction
btr.AppendEntity(leader);
trans.AddNewlyCreatedDBObject(leader, true);
// Create the leader text (TACCHE COME DA ...)
MText leaderText = new MText();
leaderText.SetDatabaseDefaults();
// Verify the space for leader text
if ((point8Y - point7Y) >= 6.5)
{
leaderText.Location = new Point3d(pointTacche2X + 3, pointTacche2Y - dimB + 0.5, 0); // Connected to the third point of the leader
}
else if ((point8Y - point7Y) < 6.5)
{
leaderText.Location = new Point3d(pointTacche2X + 3, pointRotated6Y - dimB + 0.5, 0); // Connected to the third point of the leader
}
leaderText.Width = 15;
// Adjust text height
double textHeight = 1;
if (crossSection < 11)
{
textHeight = 0.8;
}
leaderText.TextHeight = textHeight;
leaderText.Layer = "0";
leaderText.Contents = "TACCHE COME DA\nTAB_27\nN°" + numTacche + "x" + dimB + "x10";
// Add the new object to Model space and the transaction
btr.AppendEntity(leaderText);
trans.AddNewlyCreatedDBObject(leaderText, true);
////// HATCH //////////////////////////////////////////////////////////////////////
// Create the hatches
// Adds the circle to an object id array
ObjectIdCollection acObjIdColl = new ObjectIdCollection();
for (int i = 0; i < 10; i++)
{
acObjIdColl.Add(profileLineArray2[i].ObjectId);
}
// Create the hatch object and append it to the block table record
Hatch acHatch = new Hatch();
// Add the new object to Model space and the transaction
btr.AppendEntity(acHatch);
trans.AddNewlyCreatedDBObject(acHatch, true);
// Set the properties of the hatch object
// Associative must be set after the hatch object is appended to the
// block table record and before AppendLoop
acHatch.SetDatabaseDefaults();
acHatch.Layer = "FINE";
// Adjust the pattern scale
double patternScale = 1;
if (crossSection < 10)
{
patternScale = 0.15;
}
else if (crossSection >= 10 && crossSection < 19)
{
patternScale = 0.25;
}
else if (crossSection >= 19 && crossSection < 34)
{
patternScale = 0.5;
}
acHatch.PatternScale = patternScale; // Pattern scale to be defined according to the size of crossSection
// Material type (Nylon / PTFE)
string matNylon = "";
string matPTFE = "";
if (radioButton_nylon.Checked == true)
{
acHatch.SetHatchPattern(HatchPatternType.PreDefined, "ANSI32");
matNylon = "Nylon (PA6)";
}
else if (radioButton_ptfe.Checked == true)
{
acHatch.SetHatchPattern(HatchPatternType.PreDefined, "ANSI34");
matPTFE = "PTFE";
}
acHatch.Associative = true;
// Add the new object to Model space and the transaction
acHatch.AppendLoop(HatchLoopTypes.Outermost, acObjIdColl);
acHatch.EvaluateHatch(true);
// General information of the profile
MText infoText = new MText();
infoText.SetDatabaseDefaults();
infoText.Location = new Point3d(axisPoint1X + (crossSection * 0.5), insertPointY, 0); // The right side of the drawing
infoText.Width = 20;
infoText.TextHeight = textHeight;
infoText.Layer = "DEFPOINTS";
infoText.Contents = "AUTOGENERATED MALE RING\n" + intDia + "/" + extDia + "x" + height + "\n" + endlessText + splitText + "\nMaterial : " + matNylon + matPTFE;
// Add the new object to Model space and the transaction
btr.AppendEntity(infoText);
trans.AddNewlyCreatedDBObject(infoText, true);
// Commit the transaction
if (isDataValidated == true)
{
trans.Commit();
// Complete message
doc.Editor.WriteMessage("\nThe profile has been successfully created!\n");
}
}
// Exception handling
catch (System.Exception ex)
{
doc.Editor.WriteMessage("Error encountered : " + ex.Message);
trans.Abort();
}
}
}
}
