// 由尺寸线旋转角度、两条尺寸界线原点、尺寸文本位置、尺寸文本和标注样式创建转角标注的函数.
public static ObjectId AddDimRotated(double angle, Point3d pt1, Point3d pt2, Point3d ptText, string text, ObjectId style)
{
RotatedDimension ent = new RotatedDimension(angle, pt1, pt2, ptText, text, style);
ObjectId entId = AppendEntity(ent);
return(entId);
}
protected RotatedDimension CreateDim(Point3d ptPrev, Point3d ptNext, Point3d ptDimLine,
bool doTrans, Matrix3d trans, int rangeSize = 0, double rotation = 0, bool interlineText = false)
{
if (doTrans)
{
ptPrev = ptPrev.TransformBy(trans);
ptNext = ptNext.TransformBy(trans);
ptDimLine = ptDimLine.TransformBy(trans);
}
var dim = new RotatedDimension(rotation.ToRadians(), ptPrev, ptNext, ptDimLine, "", panelBase.Service.Env.IdDimStyle);
if (rangeSize > 0)
{
dim.Suffix = getTextRange(dim.Measurement, rangeSize);
}
if (interlineText)
{
dim.Dimtmove = 0;
dim.Dimtix = true;
}
dim.Dimscale = Settings.Default.SheetScale;
btrDim.AppendEntity(dim);
t.AddNewlyCreatedDBObject(dim, true);
return(dim);
}
/// <summary>
/// 由尺寸线旋转角度、两条尺寸界线原点、尺寸文本位置、尺寸文本和标注样式创建转角标注
/// </summary>
/// <param name="pt1">标注点1</param>
/// <param name="pt2">标注点2</param>
/// <param name="ptText">标注文本定位点</param>
/// <param name="text">标注替换文本</param>
/// <returns></returns>
public static RotatedDimension CreateRotatedDimension(Point3d pt1, Point3d pt2, Point3d ptText, string text)
{
double angle = new Line(pt1, pt2).Angle;
Database db = HostApplicationServices.WorkingDatabase;
ObjectId style = db.Dimstyle;
RotatedDimension ent = new RotatedDimension(angle, pt1, pt2, ptText, text, style);
return(ent);
}
/// <summary>
/// 转角标注
/// </summary>
/// <param name="worker">工作数据库</param>
/// <param name="direction">方向</param>
/// <param name="start">起始点</param>
/// <param name="end">终止点</param>
/// <param name="dimDistance">偏移距离</param>
/// <param name="textReplace">文字替代</param>
/// <returns></returns>
public static RotatedDimension RotatedDimension(this DatabaseWorker worker, RotateDirection direction, Point3d start, Point3d end, double dimDistance, string textReplace = "")
{
//根据位置计算参照其中一点移动指定距离
var x = Math.Abs(start.X - end.X); //水平差值
var y = Math.Abs(start.Y - end.Y); //竖直差值
var radian = 0.0;
var dimLinePoint = new Point3d();
switch (direction)
{
case RotateDirection.PX:
radian = -GRadian.Radians90;
dimLinePoint = start.X > end.X ? start + new Vector3d(dimDistance, y, 0) : end + new Vector3d(dimDistance, y, 0);
break;
case RotateDirection.NY:
radian = GRadian.Radians270;
dimLinePoint = start.X > end.X ? start + new Vector3d(x, -dimDistance, 0) : end + new Vector3d(x, -dimDistance, 0);
break;
case RotateDirection.NX:
radian = GRadian.Radians180;
dimLinePoint = start.X > end.X ? start + new Vector3d(-dimDistance, y, 0) : end + new Vector3d(-dimDistance, y, 0);
break;
case RotateDirection.PY:
radian = GRadian.Radians90;
dimLinePoint = start.X > end.X ? start + new Vector3d(x, dimDistance, 0) : end + new Vector3d(x, dimDistance, 0);
break;
}
var result = new RotatedDimension();
if (textReplace == string.Empty)
{
textReplace = result.Measurement.ToString();
}
result.Rotation = radian;
result.XLine1Point = start;
result.XLine2Point = end;
result.DimLinePoint = dimLinePoint;
result.DimensionText = textReplace;
//result.DimensionStyle=worker.
return(result);
}
public void Dimtest()
{
//创建要标注的图形
Line line1 = new Line(new Point3d(30, 20, 0), new Point3d(120, 20, 0));
Line line2 = new Line(new Point3d(120, 20, 0), new Point3d(120, 40, 0));
Line line3 = new Line(new Point3d(120, 40, 0), new Point3d(90, 80, 0));
Line line4 = new Line(new Point3d(90, 80, 0), new Point3d(30, 80, 0));
Arc arc = new Arc(new Point3d(30, 50, 0), 30, Math.PI / 2, Math.PI * 3 / 2);
Circle cir1 = new Circle(new Point3d(30, 50, 0), Vector3d.ZAxis, 15);
Circle cir2 = new Circle(new Point3d(70, 50, 0), Vector3d.ZAxis, 10);
Entity[] entities = new Entity[] { line1, line2, line3, line4, arc, cir1, cir2 };
List <Dimension> dims = new List <Dimension>();
RotatedDimension dimRotated1 = new RotatedDimension();
dimRotated1.XLine1Point = line1.StartPoint;
dimRotated1.XLine2Point = line1.EndPoint;
dimRotated1.DimLinePoint = GeTools.MidPoint(line1.StartPoint, line1.EndPoint)
.PolarPoint(-Math.PI / 2, 10);
dimRotated1.DimensionText = "<>mm";
dims.Add(dimRotated1);
//转角标注(垂直)
RotatedDimension dimRotated2 = new RotatedDimension();
dimRotated2.Rotation = Math.PI / 2;
dimRotated2.XLine1Point = line2.StartPoint;
dimRotated2.XLine2Point = line2.EndPoint;
dimRotated2.DimLinePoint = GeTools.MidPoint(
line2.StartPoint, line2.EndPoint)
.PolarPoint(0, 10);
dims.Add(dimRotated2);
//转角标注(尺寸公差标注)
RotatedDimension dimRotated3 = new RotatedDimension();
dimRotated3.XLine1Point = line4.StartPoint;
dimRotated3.XLine2Point = line4.EndPoint;
dimRotated3.DimLinePoint = GeTools.MidPoint(
line4.StartPoint, line4.EndPoint).PolarPoint(
Math.PI / 2, 10);
dimRotated3.DimensionText = TextTools.StackText(
"<>", "+0.026", "-0.025", StackType.Tolerance, 0.7);
dims.Add(dimRotated3);
entities.ToSpace();
}
// 由尺寸线旋转角度、两条尺寸界线原点和尺寸文本位置创建转角标注的函数.
public static ObjectId AddDimRotated(double angle, Point3d pt1, Point3d pt2, Point3d ptText)
{
Database db = HostApplicationServices.WorkingDatabase;
ObjectId style = db.Dimstyle;
Point2d p2dt1 = new Point2d(pt1.X, pt1.Y);
Point2d p2dt2 = new Point2d(pt2.X, pt2.Y);
Vector2d vec = p2dt2 - p2dt1;
string text = Math.Round(Math.Abs(vec.Length * Math.Cos(vec.Angle - angle)), db.Dimdec).ToString();
RotatedDimension ent = new RotatedDimension(angle, pt1, pt2, ptText, text, style);
ObjectId entId = AppendEntity(ent);
return(entId);
}
public static ObjectId AddDimRotated(double angle, Point3d pt1, Point3d pt2, Point3d ptText)
{
Database workingDatabase = HostApplicationServices.WorkingDatabase;
ObjectId dimstyle = workingDatabase.Dimstyle;
Point2d point2d;
point2d..ctor(pt1.X, pt1.Y);
Point2d point2d2;
point2d2..ctor(pt2.X, pt2.Y);
Vector2d vector2d = point2d2 - point2d;
string text = Math.Round(Math.Abs(vector2d.Length * Math.Cos(vector2d.Angle - angle)), workingDatabase.Dimdec).ToString();
RotatedDimension ent = new RotatedDimension(angle, pt1, pt2, ptText, text, dimstyle);
return(ModelSpace.AddEnt(ent));
}
private static void AlignDimsToLine(DocumentModifier docMdf, RotatedDimension dim, Curve c)
{
// 找到标注的两个顶点
var pt2 = FindIntersect(c, dim.DimLinePoint, dim.XLine2Point); // DimLinePoint 是 XLine2Point 所对应的点
var pt1 = FindIntersect(c, dim.DimLinePoint + (dim.XLine1Point - dim.XLine2Point), dim.XLine1Point);
if (pt1 != null)
{
dim.XLine1Point = pt1.Value;
}
if (pt2 != null)
{
dim.XLine2Point = pt2.Value;
}
//
}
addDims(Point3d varPntLower, double dblStaStart, double dblElevStart, List <POI> varpoi, string nameLayer, double dblScaleProfileView, string txt = "")
{
Point3d dblPnt1 = Pub.pnt3dO, dblPnt2 = Pub.pnt3dO, dblPntX = Pub.pnt3dO;
double dblMaxY = 0;
ObjectId idDim = ObjectId.Null;
ObjectId idDimStyle = ObjectId.Null;
for (int i = 1; i < varpoi.Count; i++)
{
dblPnt1 = new Point3d(varPntLower.X + (varpoi[i - 1].Station - dblStaStart), varPntLower.Y + (varpoi[i - 1].Elevation - dblElevStart) * dblScaleProfileView, 0);
dblPnt2 = new Point3d(varPntLower.X + (varpoi[i - 0].Station - dblStaStart), varPntLower.Y + (varpoi[i - 0].Elevation - dblElevStart) * dblScaleProfileView, 0);
if ((txt == ""))
{
dblPntX = new Point3d(dblPnt1.X + (dblPnt2.X - dblPnt1.X) / 2, dblPnt1.Y + (dblPnt2.Y - dblPnt1.Y) / 2 + 10, 0);
}
else
{
if (dblPnt1.Y > dblPnt2.Y)
{
dblMaxY = dblPnt1.Y;
}
else
{
dblMaxY = dblPnt2.Y;
}
dblPntX = new Point3d(dblPnt1.X + (dblPnt2.X - dblPnt1.X) / 2, dblMaxY + 10, 0);
}
idDimStyle = Dim.getDimStyleTableRecord("Annotative");
idDim = Dim.addDimRotated(dblPnt1, dblPnt2, dblPntX, 0.0, idDimStyle, nameLayer, .09, 3);
}
if (txt != "")
{
using (Transaction tr = BaseObjs.startTransactionDb())
{
RotatedDimension rotDim = (RotatedDimension)tr.GetObject(idDim, OpenMode.ForWrite);
rotDim.DimensionText = txt;
rotDim.Dimexo = 1.0;
rotDim.Dimgap = 0.1;
tr.Commit();
}
}
}
/// <summary>
/// 水平标注
/// </summary>
/// <param name="db"></param>
/// <param name="P1">起点</param>
/// <param name="P2">终点</param>
/// <param name="Pref">标注位置</param>
/// <param name="dimID">标注样式id</param>
/// <param name="ang">转角，弧度</param>
/// <returns></returns>
public static RotatedDimension Dim0(Database db, Point3d P1, Point3d P2, Point3d Pref
, ObjectId dimID, double ang = 0)
{
RotatedDimension D1;
using (Transaction tr = db.TransactionManager.StartTransaction())
{
BlockTable blockTbl = tr.GetObject(db.BlockTableId, OpenMode.ForRead) as BlockTable;
BlockTableRecord modelSpace = tr.GetObject(blockTbl[BlockTableRecord.ModelSpace],
OpenMode.ForWrite) as BlockTableRecord;
D1 = new RotatedDimension(ang, P1, P2, Pref, "", dimID);
D1.Layer = "标注";
modelSpace.AppendEntity(D1);
tr.AddNewlyCreatedDBObject(D1, true);
tr.Commit();
}
return(D1);
}
public static void addHorizonRotatedDimension(Database db, Point3d pt1, Point3d pt2, double distance, ObjectId dimid)
{
using (Transaction trans = db.TransactionManager.StartOpenCloseTransaction())
{
BlockTable blockTable = trans.GetObject(db.BlockTableId, OpenMode.ForRead) as BlockTable;
BlockTableRecord space = trans.GetObject(blockTable[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord;
RotatedDimension dimRotated = new RotatedDimension();
dimRotated.XLine1Point = pt1;
dimRotated.XLine2Point = pt2;
// dimRotated.DimLinePoint = new Point3d((pt1.X + pt2.X), (pt1.Y + pt2.Y), (pt1.Z + pt2.Z)).TransformBy(Matrix3d.Displacement(Vector3d.YAxis * distance)); ;
//dimRotated.DimensionText = text;//<>代表標注的主尺寸，此處在標注線上插入文字
dimRotated.DimensionStyle = dimid;
dimRotated.Layer = "Dim_Layer";
dimRotated.TextPosition = new Point3d((pt1.X + pt2.X) / 2, (pt1.Y + pt2.Y) / 2, (pt1.Z + pt2.Z) / 2).TransformBy(Matrix3d.Displacement(Vector3d.YAxis * distance));;
space.AppendEntity(dimRotated);
trans.AddNewlyCreatedDBObject(dimRotated, true);
trans.Commit();
}
}
public crawlAcDbRotatedDimension(RotatedDimension dim)
{
Entity ent = (Entity)dim;
this.ObjectId = ent.ObjectId.ToString();
this.XLine1Point = new crawlPoint3d(dim.XLine1Point.X, dim.XLine1Point.Y, dim.XLine1Point.Z);
this.XLine2Point = new crawlPoint3d(dim.XLine2Point.X, dim.XLine2Point.Y, dim.XLine2Point.Z);
this.DimLinePoint = new crawlPoint3d(dim.DimLinePoint.X, dim.DimLinePoint.Y, dim.DimLinePoint.Z);
this.TextPosition = new crawlPoint3d(dim.TextPosition.X, dim.TextPosition.Y, dim.TextPosition.Z);
this.Layer = dim.Layer;
this.Linetype = dim.Linetype;
this.LineWeight = dim.LineWeight.ToString();
this.Color = dim.Color.ToString();
this.DimensionText = dim.DimensionText;
this.DimensionStyleName = dim.DimensionStyleName;
}
addDimRotated(Point3d pnt3d1, Point3d pnt3d2, Point3d pnt3dX, double rotation, ObjectId idStyle, string nameLayer, double dblTxtHeight, int precision)
{
ObjectId idDim = ObjectId.Null;
Layer.manageLayers(nameLayer);
try
{
using (Transaction tr = BaseObjs.startTransactionDb())
{
BlockTableRecord MS = Blocks.getBlockTableRecordMS();
RotatedDimension rotDim = new RotatedDimension();
rotDim.XLine1Point = pnt3d1;
rotDim.XLine2Point = pnt3d2;
rotDim.DimLinePoint = pnt3dX;
rotDim.DimensionStyle = idStyle;
rotDim.Annotative = AnnotativeStates.True;
rotDim.Dimasz = rotation;
try
{
rotDim.Layer = nameLayer;
}
catch (System.Exception ex)
{
BaseObjs.writeDebug(ex.Message + " Dim.cs: line: 38");
}
rotDim.Dimtxt = dblTxtHeight;
rotDim.Dimdec = precision;
idDim = MS.AppendEntity(rotDim);
tr.AddNewlyCreatedDBObject(rotDim, true);
tr.Commit();
}
}
catch (System.Exception ex)
{
BaseObjs.writeDebug(ex.Message + " Dim.cs: line: 51");
}
return(idDim);
}
public static void Dim(LineSegment2d segment)
{
Document acDoc = Application.DocumentManager.MdiActiveDocument;
Database acCurDb = acDoc.Database;
Point2d p1 = segment.StartPoint;
Point2d p2 = segment.EndPoint;
//SetDimStyle(); TODO Fix Styles
using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction())
{
BlockTable acBlkTbl = acTrans.GetObject(acCurDb.BlockTableId,
OpenMode.ForRead) as BlockTable;
BlockTableRecord acBlkTblRec = acTrans.GetObject(acBlkTbl[BlockTableRecord.ModelSpace],
OpenMode.ForWrite) as BlockTableRecord;
using (RotatedDimension acRotDim = new RotatedDimension())
{
const int n = 800;
acRotDim.XLine1Point = new Point3d(p1.X, p1.Y, 0);
acRotDim.XLine2Point = new Point3d(p2.X, p2.Y, 0);
acRotDim.Rotation = p1.GetVectorTo(p2).Angle;
Vector3d vector = acRotDim.XLine2Point.GetVectorTo(acRotDim.XLine1Point).GetNormal().MultiplyBy(n);
acRotDim.DimLinePoint = acRotDim.XLine2Point.Add(vector.RotateBy(Math.PI / 2, new Vector3d(0, 0, 1)));
if (acBlkTblRec != null)
{
acBlkTblRec.AppendEntity(acRotDim);
}
acTrans.AddNewlyCreatedDBObject(acRotDim, true);
}
acTrans.Commit();
}
}
public void TestDimension()
{
Document acDoc = Application.DocumentManager.MdiActiveDocument;
Database acCurDb = acDoc.Database;
using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction())
{
BlockTable acBlkTbl = acTrans.GetObject(acCurDb.BlockTableId, OpenMode.ForRead) as BlockTable;
BlockTableRecord acBlkTblRec = acTrans.GetObject(acBlkTbl[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord;
Polyline poly0 = new Polyline();
poly0.AddVertexAt(poly0.NumberOfVertices, Point2d.Origin + Vector2d.XAxis, 0, 0, 0);
poly0.AddVertexAt(poly0.NumberOfVertices, Point2d.Origin + Vector2d.XAxis + Vector2d.YAxis * 0.8, 0, 0, 0);
poly0.AddVertexAt(poly0.NumberOfVertices, Point2d.Origin + Vector2d.XAxis * 0.8 + Vector2d.YAxis, 0, 0, 0);
poly0.AddVertexAt(poly0.NumberOfVertices, Point2d.Origin + Vector2d.XAxis * 0.5 + Vector2d.YAxis, Math.Tan(0.25 * -1 * Math.PI), 0, 0);
poly0.AddVertexAt(poly0.NumberOfVertices, Point2d.Origin + Vector2d.XAxis * -0.5 + Vector2d.YAxis, 0, 0, 0);
poly0.AddVertexAt(poly0.NumberOfVertices, Point2d.Origin + Vector2d.XAxis * -1 + Vector2d.YAxis, 0, 0, 0);
poly0.AddVertexAt(poly0.NumberOfVertices, Point2d.Origin + Vector2d.XAxis * -1, 0, 0, 0);
poly0.Closed = true;
ObjectId poly0Id = acBlkTblRec.AppendEntity(poly0);
acTrans.AddNewlyCreatedDBObject(poly0, true);
Polyline poly1 = new Polyline();
poly1.AddVertexAt(poly1.NumberOfVertices, Point2d.Origin + Vector2d.XAxis * 0.4 + Vector2d.YAxis * 0.25, Math.Tan(0.25 * Math.PI), 0, 0);
poly1.AddVertexAt(poly1.NumberOfVertices, Point2d.Origin + Vector2d.XAxis * 0.6 + Vector2d.YAxis * 0.25, Math.Tan(0.25 * Math.PI), 0, 0);
poly1.Closed = true;
ObjectId poly1Id = acBlkTblRec.AppendEntity(poly1);
acTrans.AddNewlyCreatedDBObject(poly1, true);
Polyline poly2 = new Polyline();
poly2.AddVertexAt(poly2.NumberOfVertices, Point2d.Origin + Vector2d.XAxis * -0.4 + Vector2d.YAxis * 0.25, Math.Tan(0.25 * Math.PI), 0, 0);
poly2.AddVertexAt(poly2.NumberOfVertices, Point2d.Origin + Vector2d.XAxis * -0.6 + Vector2d.YAxis * 0.25, Math.Tan(0.25 * Math.PI), 0, 0);
poly2.Closed = true;
ObjectId poly2Id = acBlkTblRec.AppendEntity(poly2);
acTrans.AddNewlyCreatedDBObject(poly2, true);
Hatch acHatch = new Hatch();
acBlkTblRec.AppendEntity(acHatch);
acTrans.AddNewlyCreatedDBObject(acHatch, true);
acHatch.PatternScale = 0.01;
acHatch.SetHatchPattern(HatchPatternType.PreDefined, "BOX");
acHatch.Associative = true;
acHatch.AppendLoop(HatchLoopTypes.Default, new ObjectIdCollection()
{
poly0Id
});
acHatch.AppendLoop(HatchLoopTypes.Default, new ObjectIdCollection()
{
poly1Id
});
acHatch.AppendLoop(HatchLoopTypes.Default, new ObjectIdCollection()
{
poly2Id
});
//对齐(框线)标注
AlignedDimension acAligDimens = new AlignedDimension(
Point3d.Origin - Vector3d.XAxis,
Point3d.Origin + Vector3d.XAxis,
Point3d.Origin + Vector3d.YAxis * -0.25,
null,
ObjectId.Null
);
acBlkTblRec.AppendEntity(acAligDimens);
acTrans.AddNewlyCreatedDBObject(acAligDimens, true);
RotatedDimension acRoDimens = new RotatedDimension(
0.0,
Point3d.Origin + Vector3d.XAxis * 0.8 + Vector3d.YAxis,
Point3d.Origin + Vector3d.XAxis + Vector3d.YAxis * 0.8,
Point3d.Origin + Vector3d.XAxis * 0.8 + Vector3d.YAxis * 1.5,
null,
ObjectId.Null
);
acBlkTblRec.AppendEntity(acRoDimens);
acTrans.AddNewlyCreatedDBObject(acRoDimens, true);
acTrans.Commit();
}
}
private static RotatedDimension addDim(BlockTableRecord btr, Transaction t,
Point3d ptPrev, Point3d ptNext, Point3d ptDimLine, double rotation = 0)
{
var dim = new RotatedDimension(rotation.ToRadians(), ptPrev, ptNext, ptDimLine, "", RollUpService.IdDimStylePik);
dim.Dimscale = 100;
btr.AppendEntity(dim);
t.AddNewlyCreatedDBObject(dim, true);
return dim;
}
public void TendonAnnotation()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
using (Transaction trans = db.TransactionManager.StartTransaction())
{
//1.选择梁顶缘线
PromptEntityOptions tpLineOpt = new PromptEntityOptions("\n选择梁顶缘线");
tpLineOpt.SetRejectMessage("\n顶缘线应为直线、圆弧或多段线");
tpLineOpt.AddAllowedClass(typeof(Line), true); //可以选择直线
tpLineOpt.AddAllowedClass(typeof(Polyline), true); //可以选择多段线
tpLineOpt.AddAllowedClass(typeof(Arc), true); //可以选择圆弧线
PromptEntityResult tpLineRes = ed.GetEntity(tpLineOpt);
if (tpLineRes.Status != PromptStatus.OK)
{
return;
}
ObjectId tpLineId = tpLineRes.ObjectId;
Curve tpLine = trans.GetObject(tpLineId, OpenMode.ForRead) as Curve;
//2.选择钢束线
PromptEntityOptions tdLineOpt = new PromptEntityOptions("\n选择钢束");
tdLineOpt.SetRejectMessage("\n钢束应为多段线");
tdLineOpt.AddAllowedClass(typeof(Polyline), true);//仅能选择多段线
PromptEntityResult tdLineRes = ed.GetEntity(tdLineOpt);
if (tdLineRes.Status != PromptStatus.OK)
{
return;
}
ObjectId tdLineId = tdLineRes.ObjectId;
Polyline tdLine = trans.GetObject(tdLineId, OpenMode.ForRead) as Polyline;
//判断钢束线是否在顶缘线以内，否则报错返回
if (tdLine.StartPoint.X < tpLine.StartPoint.X || tdLine.EndPoint.X > tpLine.EndPoint.X)
{
Application.ShowAlertDialog("钢束线超出顶缘线，请检查！");
return;
}
//3.设置绘图参数
//3.1 绘图比例
PromptDoubleOptions scaleOpt = new PromptDoubleOptions($"\n设置绘图比例<{scale}>");
scaleOpt.AllowNone = true; //允许回车，则采用前次比例
scaleOpt.AllowNegative = false; //不允许负值
scaleOpt.AllowZero = false; //不允许零值
PromptDoubleResult scaleRes = ed.GetDouble(scaleOpt); //获取比例
if (scaleRes.Status != PromptStatus.OK && scaleRes.Status != PromptStatus.None)
{
return;
}
else if (scaleRes.Status == PromptStatus.OK)
{
scale = scaleRes.Value;
}
//3.2 尺寸标注绘图位置
PromptPointOptions posOpt = new PromptPointOptions("\n设置标注线位置");
PromptPointResult posRes = ed.GetPoint(posOpt);
if (posRes.Status != PromptStatus.OK)
{
return;
}
Point3d pos = posRes.Value;
//4.开始建立标注
List <Point3d> ptsH = new List <Point3d>(); //创建水平标注点集
List <Dimension> dims = new List <Dimension>(); //创建标注集，存放各类标注
for (int i = 0; i < tdLine.NumberOfVertices - 1; i++)
{
//4.1 水平点集
ptsH.Add(tdLine.GetPoint3dAt(i));
//4.2 每段钢束线的长度
//4.3 直线标注角度
//4.4 圆弧线标注半径
if (tdLine.GetSegmentType(i) == SegmentType.Line)
{
LineSegment3d lineSeg = tdLine.GetLineSegmentAt(i);
//4.2 每段钢束线的长度
db.LineLengthDim(lineSeg, scale);
//4.3 直线标注角度
if (tdLine.StartPoint.X < tdLine.EndPoint.X)
{
db.LineAngelDim(lineSeg, !(i == tdLine.NumberOfVertices - 2), scale);
}
else
{
db.LineAngelDim(lineSeg, (i == tdLine.NumberOfVertices - 2), scale);
}
}
else if (tdLine.GetSegmentType(i) == SegmentType.Arc)
{
CircularArc3d arcSeg = tdLine.GetArcSegmentAt(i);
//4.2 每段钢束线的长度
db.ArcLengthDim(arcSeg, scale);
//4.3 圆弧标注半径
db.ArrowRadiusDim(arcSeg, scale);
}
//4.5 竖直距离标注
Ray vRay = new Ray();//建立竖直射线
vRay.BasePoint = tdLine.GetPoint3dAt(i);
vRay.UnitDir = new Vector3d(0, 1, 0);
Point3dCollection ptIntersects = new Point3dCollection();
tpLine.IntersectWith(vRay, Intersect.OnBothOperands, ptIntersects, IntPtr.Zero, IntPtr.Zero);
Point3d ptIntersect = ptIntersects[0];
RotatedDimension dimV = new RotatedDimension();
dimV.XLine1Point = tdLine.GetPoint3dAt(i); //第一条尺寸边线
dimV.XLine2Point = ptIntersect; //第二条尺寸边线
dimV.DimLinePoint = tdLine.GetPoint3dAt(i); //尺寸线位置
dimV.Rotation = Math.PI / 2; //标注旋转90度
dimV.DimensionStyle = db.Dimstyle; //尺寸样式为当前样式
dimV.Dimscale = scale; //设置尺寸全局比例
dims.Add(dimV);
}
//4.1 节点间距点集缺钢束最后一个点、梁顶缘线端点
ptsH.Add(tdLine.EndPoint);
ptsH.Add(tpLine.StartPoint);
ptsH.Add(tpLine.EndPoint);
db.ContinuedHorizontalDims(ptsH, pos, scale);//建立水平连续标注
//4.5 竖直距离标注缺最后一个点
Ray vRayLast = new Ray();//建立竖直射线
vRayLast.BasePoint = tdLine.GetPoint3dAt(tdLine.NumberOfVertices - 1);
vRayLast.UnitDir = new Vector3d(0, 1, 0);
Point3dCollection ptIntersectsLast = new Point3dCollection();
tpLine.IntersectWith(vRayLast, Intersect.OnBothOperands, ptIntersectsLast, IntPtr.Zero, IntPtr.Zero);
Point3d ptIntersectLast = ptIntersectsLast[0];
RotatedDimension dimVLast = new RotatedDimension();
dimVLast.XLine1Point = tdLine.GetPoint3dAt(tdLine.NumberOfVertices - 1); //第一条尺寸边线
dimVLast.XLine2Point = ptIntersectLast; //第二条尺寸边线
dimVLast.DimLinePoint = tdLine.GetPoint3dAt(tdLine.NumberOfVertices - 1); //尺寸线位置
dimVLast.Rotation = Math.PI / 2; //标注旋转90度
dimVLast.DimensionStyle = db.Dimstyle; //尺寸样式为当前样式
dimVLast.Dimscale = scale; //设置尺寸全局比例
dims.Add(dimVLast);
//4.6 绘制张拉端
//4.6.1 绘制两侧张拉段
//获取钢束线真实的起点和终点
Point3d tdStart = (tdLine.StartPoint.X < tdLine.EndPoint.X) ? tdLine.StartPoint : tdLine.EndPoint;
Point3d tdEnd = (tdLine.StartPoint.X < tdLine.EndPoint.X) ? tdLine.EndPoint : tdLine.StartPoint;
//获取钢束线真实的起终点角度
double iclStart = (tdLine.StartPoint.X < tdLine.EndPoint.X) ?
GetAngleOfLineSeg(tdLine.GetLineSegmentAt(0)) : GetAngleOfLineSeg(tdLine.GetLineSegmentAt(tdLine.NumberOfVertices - 2));
double iclEnd = (tdLine.StartPoint.X < tdLine.EndPoint.X) ?
GetAngleOfLineSeg(tdLine.GetLineSegmentAt(tdLine.NumberOfVertices - 2)) : GetAngleOfLineSeg(tdLine.GetLineSegmentAt(0));
//创建张拉端几何点
Point3d tdDrawL = GeTools.PolarPoint(tdStart, iclStart, -800);
Point3d tdDrawR = GeTools.PolarPoint(tdEnd, iclEnd, 800);
//创建张拉段
Line leftDraw = new Line(tdDrawL, tdStart);
leftDraw.Layer = tdLine.Layer; //张拉段与钢束线应该在同一层
Line rightDraw = new Line(tdDrawR, tdEnd);
rightDraw.Layer = tdLine.Layer; //张拉段与钢束线应该在同一层
//4.6.2 标注张拉段的长度
//左侧张拉段
MText lengthL = new MText();
//长度
lengthL.Contents = "工作长度800";
//文字高度
lengthL.TextHeight = 3 * scale;
//样式为当前样式
lengthL.TextStyleId = db.Textstyle;
//旋转角度同直线段倾角
lengthL.Rotation = iclStart;
//对齐位置为右上
lengthL.Attachment = AttachmentPoint.TopRight;
//位置为中点垂线以下0.5个单位
lengthL.Location = GeTools.PolarPoint(GeTools.MidPoint(leftDraw.StartPoint,
leftDraw.EndPoint), iclStart - Math.PI / 2, 0.5 * scale);
//右侧张拉段
MText lengthR = new MText();
//长度
lengthR.Contents = "工作长度800";
//文字高度
lengthR.TextHeight = 3 * scale;
//样式为当前样式
lengthR.TextStyleId = db.Textstyle;
//旋转角度同直线段倾角
lengthR.Rotation = iclEnd;
//对齐位置为左上
lengthR.Attachment = AttachmentPoint.TopLeft;
//位置为中点垂线以下0.5个单位
lengthR.Location = GeTools.PolarPoint(GeTools.MidPoint(rightDraw.StartPoint,
rightDraw.EndPoint), iclEnd - Math.PI / 2, 0.5 * scale);
//4.7 在截面顶缘标识“梁顶缘线”
Point3d midPt = GeTools.MidPoint(tpLine.StartPoint, tpLine.EndPoint); //顶缘线起终点中点
Point3d midPtInTp = tpLine.GetClosestPointTo(midPt, Vector3d.YAxis, true); //顶缘线上靠近中点的点
MText tpAnno = new MText();
tpAnno.Contents = "梁顶缘线";
//文字高度
tpAnno.TextHeight = 3 * scale;
//样式为当前样式
tpAnno.TextStyleId = db.Textstyle;
//对齐位置为右上
tpAnno.Attachment = AttachmentPoint.BottomLeft;
//位置为中点以上0.5个单位
tpAnno.Location = GeTools.PolarPoint(midPtInTp, Math.PI / 2, 0.5 * scale);
db.AddToModelSpace(dims.ToArray()); //添加各类标注
db.AddToModelSpace(leftDraw, rightDraw, lengthL, lengthR); //添加张拉段线
db.AddToModelSpace(tpAnno); //添加梁顶缘线标识
trans.Commit();
}
}
public void Cmd_GenDims()
{
var acCurDoc = Application.DocumentManager.MdiActiveDocument;
var acCurDb = acCurDoc.Database;
var acCurEd = acCurDoc.Editor;
var objIds = acCurEd.GetAllSelection(false);
if (objIds.Length <= 0)
{
return;
}
using (var pWorker = new ProgressAgent("Generating Dimension: ", objIds.Length))
{
using (var acTrans = acCurDb.TransactionManager.StartTransaction())
{
foreach (var obj in objIds)
{
if (!pWorker.Progress())
{
acTrans.Abort();
return;
}
var acEnt = acTrans.GetObject(obj, OpenMode.ForRead) as Entity;
if (acEnt == null)
{
continue;
}
var extents = acEnt.GeometricExtents;
var minPt = extents.MinPoint;
var maxPt = extents.MaxPoint;
// Create the rotated dimension
using (var acXDim = new RotatedDimension())
{
acXDim.XLine1Point = new Point3d(minPt.X, minPt.Y, 0);
acXDim.XLine2Point = new Point3d(maxPt.X, minPt.Y, 0);
acXDim.DimLinePoint = new Point3d(minPt.X, minPt.Y - SettingsUser.AnnoSpacing, 0);
acXDim.DimensionStyle = acCurDb.Dimstyle;
// Add the new object to Model space and the transaction
acCurDb.AppendEntity(acXDim);
}
// Create the rotated dimension
using (var acYDim = new RotatedDimension())
{
acYDim.XLine1Point = new Point3d(minPt.X, minPt.Y, 0);
acYDim.XLine2Point = new Point3d(minPt.X, maxPt.Y, 0);
acYDim.Rotation = CalcUnit.ConvertToRadians(90);
acYDim.DimLinePoint = new Point3d(minPt.X - SettingsUser.AnnoSpacing, minPt.Y, 0);
acYDim.DimensionStyle = acCurDb.Dimstyle;
// Add the new object to Model space and the transaction
acCurDb.AppendEntity(acYDim);
}
}
acTrans.Commit();
}
}
}
private static void CreateDimension(Point3d CommonDimPos, Point3d[] dimPos,
Direction dimDir)
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Database dBase = doc.Database;
using (Transaction acTrans = doc.TransactionManager.StartTransaction())
{
BlockTable blockTable1;
blockTable1 = acTrans.GetObject(dBase.BlockTableId, OpenMode.ForRead) as BlockTable;
BlockTableRecord recBT;
recBT = acTrans.GetObject(blockTable1[BlockTableRecord.ModelSpace], OpenMode.ForWrite) as BlockTableRecord;
for (int i = 0; i < +dimPos.Length; i++)
{
Point3d dimOrigin = new Point3d( );
double rotationAng = 0;
double offsetFactor = i + 1.5;
if (dimDir == Direction.Horizontal)
{
dimOrigin = new Point3d((CommonDimPos.X + dimPos[i].X) / 2, dimPos[i].Y + offsetFactor * pipeRadius, 0);
if (bendAngle == 90)
{
rotationAng = System.Math.PI;
}
else
{
rotationAng = 1.25 * System.Math.PI;
}
}
else
{
dimOrigin = new Point3d(CommonDimPos.X - offsetFactor * pipeRadius, (dimPos[i].Y + dimPos[i].Y) / 2, 0);
rotationAng = 0.5 * System.Math.PI;
}
RotatedDimension rotatedDim = new RotatedDimension();
rotatedDim.SetDatabaseDefaults();
rotatedDim.XLine1Point = CommonDimPos;
rotatedDim.XLine2Point = dimPos[i];
rotatedDim.DimLinePoint = dimOrigin;
rotatedDim.DimensionStyle = dBase.Dimstyle;
rotatedDim.Rotation = rotationAng;
rotatedDim.Layer = "IE_Object_Layer";
recBT.AppendEntity(rotatedDim);
acTrans.AddNewlyCreatedDBObject(rotatedDim, true);
}
acTrans.Commit();
}
}
private string jsonGetObjectData(ObjectId id_platf)
{
string result = "";
try
{//Всякое может случиться
//Открываем переданный в функцию объект на чтение, преобразуем его к Entity
Entity ent = (Entity)id_platf.GetObject(OpenMode.ForRead);
//Далее последовательно проверяем класс объекта на соответствие классам основных примитивов
if (id_platf.ObjectClass.Name == "AcDbLine")
{ //Если объект - отрезок (line)
crawlAcDbLine kline = new crawlAcDbLine((Line)ent); //Преобразуем к типу линия
result = jsonHelper.To <crawlAcDbLine>(kline);
}
else if (id_platf.ObjectClass.Name == "AcDbPolyline")
{//Если объект - полилиния
Polyline kpLine = (Polyline)ent;
crawlAcDbPolyline jpline = new crawlAcDbPolyline(kpLine);
result = jsonHelper.To <crawlAcDbPolyline>(jpline);
}
else if (id_platf.ObjectClass.Name == "AcDb2dPolyline")
{//2D полилиния - такие тоже попадаются
Polyline2d kpLine = (Polyline2d)ent;
crawlAcDbPolyline jpline = new crawlAcDbPolyline(kpLine);
result = jsonHelper.To <crawlAcDbPolyline>(jpline);
}
else if (id_platf.ObjectClass.Name == "AcDb3dPolyline")
{//2D полилиния - такие тоже попадаются
Polyline3d kpLine = (Polyline3d)ent;
crawlAcDbPolyline jpline = new crawlAcDbPolyline(kpLine);
result = jsonHelper.To <crawlAcDbPolyline>(jpline);
}
else if (id_platf.ObjectClass.Name == "AcDbText")
{ //Текст
DBText dbtxt = (DBText)ent;
crawlAcDbText jtext = new crawlAcDbText(dbtxt);
result = jsonHelper.To <crawlAcDbText>(jtext);
}
else if (id_platf.ObjectClass.Name == "AcDbMText")
{//Мтекст
MText mtxt = (MText)ent;
crawlAcDbMText jtext = new crawlAcDbMText(mtxt);
result = jsonHelper.To <crawlAcDbMText>(jtext);
}
else if (id_platf.ObjectClass.Name == "AcDbArc")
{//Дуга
Arc arc = (Arc)ent;
crawlAcDbArc cArc = new crawlAcDbArc(arc);
result = jsonHelper.To <crawlAcDbArc>(cArc);
}
else if (id_platf.ObjectClass.Name == "AcDbCircle")
{//Окружность
Circle circle = (Circle)ent;
crawlAcDbCircle cCircle = new crawlAcDbCircle(circle);
result = jsonHelper.To <crawlAcDbCircle>(cCircle);
}
else if (id_platf.ObjectClass.Name == "AcDbEllipse")
{ //Эллипс
Ellipse el = (Ellipse)ent;
crawlAcDbEllipse cEll = new crawlAcDbEllipse(el);
result = jsonHelper.To <crawlAcDbEllipse>(cEll);
}
else if (id_platf.ObjectClass.Name == "AcDbAlignedDimension")
{//Размер повернутый
AlignedDimension dim = (AlignedDimension)ent;
crawlAcDbAlignedDimension rDim = new crawlAcDbAlignedDimension(dim);
result = jsonHelper.To <crawlAcDbAlignedDimension>(rDim);
}
else if (id_platf.ObjectClass.Name == "AcDbRotatedDimension")
{//Размер повернутый
RotatedDimension dim = (RotatedDimension)ent;
crawlAcDbRotatedDimension rDim = new crawlAcDbRotatedDimension(dim);
result = jsonHelper.To <crawlAcDbRotatedDimension>(rDim);
}
else if (id_platf.ObjectClass.Name == "AcDbPoint3AngularDimension")
{//Угловой размер по 3 точкам
Point3AngularDimension dim = (Point3AngularDimension)ent;
crawlAcDbPoint3AngularDimension rDim = new crawlAcDbPoint3AngularDimension(dim);
result = jsonHelper.To <crawlAcDbPoint3AngularDimension>(rDim);
}
else if (id_platf.ObjectClass.Name == "AcDbLineAngularDimension2")
{//Еще угловой размер по точкам
LineAngularDimension2 dim = (LineAngularDimension2)ent;
crawlAcDbLineAngularDimension2 rDim = new crawlAcDbLineAngularDimension2(dim);
result = jsonHelper.To <crawlAcDbLineAngularDimension2>(rDim);
}
else if (id_platf.ObjectClass.Name == "AcDbDiametricDimension")
{ //Размер диаметра окружности
DiametricDimension dim = (DiametricDimension)ent;
crawlAcDbDiametricDimension rDim = new crawlAcDbDiametricDimension(dim);
result = jsonHelper.To <crawlAcDbDiametricDimension>(rDim);
}
else if (id_platf.ObjectClass.Name == "AcDbArcDimension")
{ //Дуговой размер
ArcDimension dim = (ArcDimension)ent;
crawlAcDbArcDimension rDim = new crawlAcDbArcDimension(dim);
result = jsonHelper.To <crawlAcDbArcDimension>(rDim);
}
else if (id_platf.ObjectClass.Name == "AcDbRadialDimension")
{ //Радиальный размер
RadialDimension dim = (RadialDimension)ent;
crawlAcDbRadialDimension rDim = new crawlAcDbRadialDimension(dim);
result = jsonHelper.To <crawlAcDbRadialDimension>(rDim);
}
else if (id_platf.ObjectClass.Name == "AcDbAttributeDefinition")
{ //Атрибут блока
AttributeDefinition ad = (AttributeDefinition)ent;
crawlAcDbAttributeDefinition atd = new crawlAcDbAttributeDefinition(ad);
result = jsonHelper.To <crawlAcDbAttributeDefinition>(atd);
}
else if (id_platf.ObjectClass.Name == "AcDbHatch")
{//Штриховка
Teigha.DatabaseServices.Hatch htch = ent as Teigha.DatabaseServices.Hatch;
crawlAcDbHatch cHtch = new crawlAcDbHatch(htch);
result = jsonHelper.To <crawlAcDbHatch>(cHtch);
}
else if (id_platf.ObjectClass.Name == "AcDbSpline")
{//Сплайн
Spline spl = ent as Spline;
crawlAcDbSpline cScpline = new crawlAcDbSpline(spl);
result = jsonHelper.To <crawlAcDbSpline>(cScpline);
}
else if (id_platf.ObjectClass.Name == "AcDbPoint")
{//Точка
DBPoint Pnt = ent as DBPoint;
crawlAcDbPoint pt = new crawlAcDbPoint(Pnt);
result = jsonHelper.To <crawlAcDbPoint>(pt);
}
else if (id_platf.ObjectClass.Name == "AcDbBlockReference")
{//Блок
BlockReference blk = ent as BlockReference;
crawlAcDbBlockReference cBlk = new crawlAcDbBlockReference(blk);
result = jsonHelper.To <crawlAcDbBlockReference>(cBlk);
//newDocument(id_platf, result);
}
else if (id_platf.ObjectClass.Name == "AcDbProxyEntity")
{//Прокси
ProxyEntity pxy = ent as ProxyEntity;
crawlAcDbProxyEntity cBlk = new crawlAcDbProxyEntity(pxy);
result = jsonHelper.To <crawlAcDbProxyEntity>(cBlk);
DocumentFromBlockOrProxy(id_platf, result);
}
else if (id_platf.ObjectClass.Name == "AcDbSolid")
{//Солид 2Д
Solid solid = (Solid)ent;
crawlAcDbSolid cSld = new crawlAcDbSolid(solid);
result = jsonHelper.To <crawlAcDbSolid>(cSld);
}
/*
*
*
* else if (id_platf.ObjectClass.Name == "AcDbLeader")
* { //Выноска Autocad
* Leader ld = (Leader)ent;
*
* if (ld.EndPoint.Z != 0 || ld.StartPoint.Z != 0)
* {
* //ed.WriteMessage("DEBUG: Преобразован объект: Выноска Autocad");
*
* ld.EndPoint = new Point3d(ld.EndPoint.X, ld.EndPoint.Y, 0);
* ld.StartPoint = new Point3d(ld.StartPoint.X, ld.StartPoint.Y, 0);
*
* result = true;
* };
*
* }
* /*
* else if (id_platf.ObjectClass.Name == "AcDbPolygonMesh")
* {
* BUG: В платформе нет API для доступа к вершинам сетей AcDbPolygonMesh и AcDbPolygonMesh и AcDbSurface
*
* }
* else if (id_platf.ObjectClass.Name == "AcDbSolid")
* {
* BUG: Чтобы плющить Solid-ы нужны API функции 3d
* }
* else if (id_platf.ObjectClass.Name == "AcDbRegion")
* {
* Region rgn = ent as Region;
* BUG: нет свойств у региона
* }
*
*/
else
{
//Если объект не входит в число перечисленных типов,
//то выводим в командную строку класс этого необработанного объекта
cDebug.WriteLine("Не могу обработать тип объекта: " + id_platf.ObjectClass.Name);
}
}
catch (System.Exception ex)
{
//Если что-то сломалось, то в командную строку выводится ошибка
cDebug.WriteLine("Не могу преобразовать - ошибка: " + ex.Message);
};
//Возвращаем значение функции
return(result);
}
/// <summary>
/// 读取dwg中entities信息
/// </summary>
public static void GetDwgGeometry(string layerName)
{
Database db = HostApplicationServices.WorkingDatabase;
using (Transaction trans = db.TransactionManager.StartTransaction())
{
LayerTable lt = (LayerTable)trans.GetObject(db.LayerTableId, OpenMode.ForRead);
if (lt.Has(layerName))
{
BlockTableRecord ltr = (BlockTableRecord)trans.GetObject(db.CurrentSpaceId, OpenMode.ForRead);
int a, r, g, b = 0;
foreach (ObjectId objId in ltr)
{
Entity ent = (Entity)trans.GetObject(objId, OpenMode.ForRead);
#region 遍历entities
if (ent.Layer == layerName)
{
string type = ent.GetType().ToString().Replace("Autodesk.AutoCAD.DatabaseServices.", "");
if (type == "Line")
{
Line line = (Line)ent;
//EntityLayer.Add(line.Layer);
//EntityType.Add(type);
//LineType.Add(line.Linetype);
a = line.Color.ColorValue.A;
r = line.Color.ColorValue.R;
g = line.Color.ColorValue.G;
b = line.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
EntityHandle.Add(line.Handle);
TextRotation.Add("null");
//Coordinate.Add(line.StartPoint + "," + line.EndPoint);
//Text.Add("null");
//Height.Add("null");
//LineWidth.Add(line.LineWeight);
//CRadius.Add("null");
//ExtenedEntity.Add("null");
}
else if (type == "AttributeDefinition")
{
AttributeDefinition attribute = (AttributeDefinition)ent;
//EntityLayer.Add(attribute.Layer);
//EntityType.Add(type);
EntityHandle.Add(attribute.Handle);
//LineType.Add("null");
a = attribute.Color.ColorValue.A;
r = attribute.Color.ColorValue.R;
g = attribute.Color.ColorValue.G;
b = attribute.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
TextRotation.Add("null");
//Coordinate.Add(attribute.Position);
//Text.Add("null");
//Height.Add("null");
//LineWidth.Add("null");
//CRadius.Add("null");
//ExtenedEntity.Add(attribute.ExtensionDictionary);
}
else if (type == "DBPoint")
{
DBPoint dbpoint = (DBPoint)ent;
//EntityLayer.Add(dbpoint.Layer);
//EntityType.Add(type);
EntityHandle.Add(dbpoint.Handle);
//LineType.Add(dbpoint.Linetype);
a = dbpoint.Color.ColorValue.A;
r = dbpoint.Color.ColorValue.R;
g = dbpoint.Color.ColorValue.G;
b = dbpoint.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
TextRotation.Add("null");
//Coordinate.Add(dbpoint.Position);
//Text.Add("null");
//Height.Add("null");
//LineWidth.Add("null");
//CRadius.Add("null");
//ExtenedEntity.Add("null");
}
else if (type == "Ellipse")
{
Ellipse ellipse = (Ellipse)ent;
//EntityLayer.Add(ellipse.Layer);
//EntityType.Add(type);
EntityHandle.Add(ellipse.Handle);
//LineType.Add("null");
a = ellipse.Color.ColorValue.A;
r = ellipse.Color.ColorValue.R;
g = ellipse.Color.ColorValue.G;
b = ellipse.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
TextRotation.Add("null");
//Coordinate.Add(ellipse.GetPlane().GetCoordinateSystem());
//Text.Add("null");
//Height.Add("null");
//LineWidth.Add("null");
//CRadius.Add("null");
//ExtenedEntity.Add("null");
}
else if (type == "DBText")
{
DBText dbtext = (DBText)ent;
//EntityLayer.Add(dbtext.Layer);
//EntityType.Add(type);
EntityHandle.Add(dbtext.Handle);
TextRotation.Add(dbtext.Rotation);
//LineType.Add("null");
a = dbtext.Color.ColorValue.A;
r = dbtext.Color.ColorValue.R;
g = dbtext.Color.ColorValue.G;
b = dbtext.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
//Coordinate.Add(dbtext.Position);
Text.Add(dbtext.TextString);
//Height.Add(dbtext.Height);
//LineWidth.Add("null");
//CRadius.Add("null");
//ExtenedEntity.Add("null");
if (dbtext.TextString.Contains("说明"))
{
_position = dbtext.Position.ToString();
}
}
else if (type == "RadialDimension")
{
RadialDimension radial = (RadialDimension)ent;
//EntityLayer.Add(radial.Layer);
//EntityType.Add(type);
EntityHandle.Add(radial.Handle);
//LineType.Add("null");
a = radial.Color.ColorValue.A;
r = radial.Color.ColorValue.R;
g = radial.Color.ColorValue.G;
b = radial.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
TextRotation.Add("null");
//Coordinate.Add(radial.GetPlane().GetCoordinateSystem());
//Text.Add("null");
//Height.Add("null");
//LineWidth.Add("null");
//CRadius.Add("null");
//ExtenedEntity.Add(radial.ExtensionDictionary);
}
else if (type == "AlignedDimension")
{
AlignedDimension aligned = (AlignedDimension)ent;
//EntityLayer.Add(aligned.Layer);
//EntityType.Add(type);
EntityHandle.Add(aligned.Handle);
//LineType.Add("null");
a = aligned.Color.ColorValue.A;
r = aligned.Color.ColorValue.R;
g = aligned.Color.ColorValue.G;
b = aligned.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
TextRotation.Add("null");
//Coordinate.Add(aligned.GeometricExtents);
//Text.Add(aligned.TextAttachment);
//Height.Add("null");
//LineWidth.Add("null");
//CRadius.Add("null");
//ExtenedEntity.Add("null");
}
else if (type == "Spline")
{
Spline spline = (Spline)ent;
//EntityLayer.Add(spline.Layer);
//EntityType.Add(type);
EntityHandle.Add(spline.Handle);
//LineType.Add(spline.Linetype);
a = spline.Color.ColorValue.A;
r = spline.Color.ColorValue.R;
g = spline.Color.ColorValue.G;
b = spline.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
TextRotation.Add("null");
//List<Point3d> points_spline = new List<Point3d>();
//for(int i = 0; i < spline.NumControlPoints; i++)
//{
// points_spline.Add(spline.GetControlPointAt(i));
//}
//Coordinate.Add(points_spline);
//Text.Add("null");
//Height.Add("null");
//LineWidth.Add(spline.LineWeight);
//CRadius.Add("null");
//ExtenedEntity.Add("null");
}
else if (type == "RotatedDimension")
{
RotatedDimension rotate = (RotatedDimension)ent;
//EntityLayer.Add(rotate.Layer);
//EntityType.Add(type);
EntityHandle.Add(rotate.Handle);
//LineType.Add("null");
a = rotate.Color.ColorValue.A;
r = rotate.Color.ColorValue.R;
g = rotate.Color.ColorValue.G;
b = rotate.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
TextRotation.Add("null");
//Coordinate.Add(rotate.GeometricExtents);
//Text.Add("null");
//Height.Add("null");
//LineWidth.Add("null");
//CRadius.Add("null");
//ExtenedEntity.Add(rotate.ExtensionDictionary);
}
else if (type == "Polyline")
{
Polyline pline = (Polyline)ent;
//EntityLayer.Add(pline.Layer);
//EntityType.Add(type);
EntityHandle.Add(pline.Handle);
//LineType.Add(pline.Linetype);
a = pline.Color.ColorValue.A;
r = pline.Color.ColorValue.R;
g = pline.Color.ColorValue.G;
b = pline.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
TextRotation.Add("null");
//CRadius.Add("null");
//List<Point3d> points_polyline = new List<Point3d>();
//for(int i = 0; i < pline.NumberOfVertices; i++)
//{
// points_polyline.Add(pline.GetPoint3dAt(i));
//}
//Coordinate.Add(points_polyline);
//Text.Add("null");
//Height.Add("null");
//LineWidth.Add(pline.LineWeight);
//ExtenedEntity.Add("null");
}
else if (type == "MText")
{
MText mtext = (MText)ent;
//EntityLayer.Add(mtext.Layer);
//EntityType.Add(type);
EntityHandle.Add(mtext.Handle);
TextRotation.Add(mtext.Rotation);
//LineType.Add("null");
a = mtext.Color.ColorValue.A;
r = mtext.Color.ColorValue.R;
g = mtext.Color.ColorValue.G;
b = mtext.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
//Coordinate.Add(mtext.Location);
//Text.Add(mtext.Contents);
//Height.Add(mtext.Height);
//LineWidth.Add("null");
//CRadius.Add("null");
//ExtenedEntity.Add("null");
if (mtext.Text.Contains("说明"))
{
_position = mtext.Location.ToString();
}
}
else if (type == "Arc")
{
Arc arc = (Arc)ent;
//EntityLayer.Add(arc.Layer);
//EntityType.Add(type);
EntityHandle.Add(arc.Handle);
//LineType.Add("null");
a = arc.Color.ColorValue.A;
r = arc.Color.ColorValue.R;
g = arc.Color.ColorValue.G;
b = arc.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
TextRotation.Add("null");
//Coordinate.Add(arc.Center);
//Text.Add("null");
//Height.Add("null");
//LineWidth.Add("null");
//CRadius.Add(arc.Radius);
//ExtenedEntity.Add("null");
}
else if (type == "Hatch")
{
Hatch hatch = (Hatch)ent;
//EntityLayer.Add(hatch.Layer);
//EntityType.Add(type);
EntityHandle.Add(hatch.Handle);
//LineType.Add("null");
a = hatch.Color.ColorValue.A;
r = hatch.Color.ColorValue.R;
g = hatch.Color.ColorValue.G;
b = hatch.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
TextRotation.Add("null");
//Coordinate.Add(hatch.GeometricExtents);
//Text.Add("null");
//Height.Add("null");
//LineWidth.Add("null");
//CRadius.Add("null");
//ExtenedEntity.Add(hatch.ExtensionDictionary);
}
else if (type == "Dimension")
{
Dimension dim = (Dimension)ent;
//EntityLayer.Add(dim.Layer);
//EntityType.Add(type);
EntityHandle.Add(dim.Handle);
//LineType.Add("null");
a = dim.Color.ColorValue.A;
r = dim.Color.ColorValue.R;
g = dim.Color.ColorValue.G;
b = dim.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
TextRotation.Add("null");
//Coordinate.Add(dim.TextPosition);
//Text.Add("null");
//Height.Add("null");
//LineWidth.Add("null");
//CRadius.Add("null");
//ExtenedEntity.Add(dim.ExtensionDictionary);
}
else if (type == "Circle")
{
Circle circle = (Circle)ent;
//EntityLayer.Add(circle.Layer);
//EntityType.Add(type);
EntityHandle.Add(circle.Handle);
//LineType.Add("null");
a = circle.Color.ColorValue.A;
r = circle.Color.ColorValue.R;
g = circle.Color.ColorValue.G;
b = circle.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
TextRotation.Add("null");
//Coordinate.Add(circle.Center);
//Text.Add("null");
//Height.Add("null");
//LineWidth.Add("null");
//CRadius.Add(circle.Radius);
//ExtenedEntity.Add("null");
}
else if (type == "BlockReference")
{
BlockReference block = (BlockReference)ent;
//EntityLayer.Add(block.Layer);
//EntityType.Add(type);
EntityHandle.Add(block.Handle);
//LineType.Add("null");
a = block.Color.ColorValue.A;
r = block.Color.ColorValue.R;
g = block.Color.ColorValue.G;
b = block.Color.ColorValue.B;
EntityColor.Add(RgbToHex(a, r, g, b));
TextRotation.Add("null");
//Coordinate.Add(block.GeometricExtents);
//Text.Add("null");
//Height.Add("null");
//LineWidth.Add("null");
//CRadius.Add("null");
//ExtenedEntity.Add(block.ExtensionDictionary);
}
else
{
//EntityLayer.Add("null");
//EntityType.Add("null");
//EntityHandle.Add("null");
//LineType.Add("null");
//EntityColor.Add("null");
//Coordinate.Add("null");
//Text.Add("null");
//Height.Add("null");
//LineWidth.Add("null");
//CRadius.Add("null");
//ExtenedEntity.Add("null");
}
#endregion
}
}
}
trans.Commit();
}
}
public static void GetInfoDirectas()
{
bool? oked = false;
Document acDoc = Application.DocumentManager.MdiActiveDocument;
Database acCurDb = acDoc.Database;
System.Windows.Window win = new Directas();
oked = Application.ShowModalWindow(win);
oked = true;
if (oked.HasValue && oked.Value)
{
Directas instance = (Directas)win;
List <Directas.Apoyo> apoyos;
if (instance.finalizo)
{
apoyos = instance.apoyos;
using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction())
{
BlockTable acBlkTbl;
acBlkTbl = acTrans.GetObject(acCurDb.BlockTableId,
OpenMode.ForRead) as BlockTable;
BlockTableRecord acBlkTblRec;
acBlkTblRec = acTrans.GetObject(acBlkTbl[BlockTableRecord.ModelSpace],
OpenMode.ForWrite) as BlockTableRecord;
Polyline[] acPoly = new Polyline[apoyos.Count];
Polyline[] columna = new Polyline[apoyos.Count];
Point3d[] points = new Point3d[apoyos.Count];
for (int i = 0; i < apoyos.Count; i++)
{
if (apoyos[i].Dimensionar)
{
using (acPoly[i] = new Polyline())
{
acPoly[i].AddVertexAt(0, new Point2d(apoyos[i].Vertice1X, apoyos[i].Vertice1Y), 0, 0, 0);
acPoly[i].AddVertexAt(1, new Point2d(apoyos[i].Vertice2X, apoyos[i].Vertice2Y), 0, 0, 0);
acPoly[i].AddVertexAt(2, new Point2d(apoyos[i].Vertice4X, apoyos[i].Vertice4Y), 0, 0, 0);
acPoly[i].AddVertexAt(3, new Point2d(apoyos[i].Vertice3X, apoyos[i].Vertice3Y), 0, 0, 0);
acPoly[i].AddVertexAt(4, new Point2d(apoyos[i].Vertice1X, apoyos[i].Vertice1Y), 0, 0, 0);
acBlkTblRec.AppendEntity(acPoly[i]);
acTrans.AddNewlyCreatedDBObject(acPoly[i], true);
}
}
using (MText acMText = new MText())
{
if (apoyos[i].ZapataConjuntaX)//vertical
{
acMText.Location = new Point3d(((apoyos[i].CoordEjeX - apoyos[i].B / 2) - 0.3), apoyos[i].CoordEjeY, 0);
acMText.Width = apoyos[i].Vertice2X - apoyos[i].Vertice1X;
acMText.Contents = ("-Carga Actuante " + apoyos[i].Carga + "Ton \n-Qadmisible " + Math.Round((apoyos[i].Qadmisible * 0.1), 2) + "kg/cm² \n-B " + Math.Round(apoyos[i].B, 2) + "mts \n-L " + apoyos[i].Ltotal + "mts");
}
else if (apoyos[i].ZapataConjuntaY) //horizontal
{
acMText.Location = new Point3d(apoyos[i].CoordEjeX, ((apoyos[i].CoordEjeY - apoyos[i].B / 2) - 0.2), 0);
acMText.Width = apoyos[i].Vertice2X - apoyos[i].Vertice1X;
acMText.Contents = ("-Carga Actuante " + apoyos[i].Carga + "Ton \n-Qadmisible " + Math.Round((apoyos[i].Qadmisible * 0.1), 2) + "kg/cm² \n-B " + Math.Round(apoyos[i].B, 2) + "mts \n-L " + apoyos[i].Ltotal + "mts");
}
else
{
acMText.Location = new Point3d(apoyos[i].Vertice3X, apoyos[i].Vertice3Y - 0.3, 0);
acMText.Width = apoyos[i].Vertice2X - apoyos[i].Vertice1X;
acMText.Contents = ("-Carga Actuante " + apoyos[i].Carga + "Ton \n-Qadmisible " + Math.Round((apoyos[i].Qadmisible * 0.1), 2) + "kg/cm² \n-B " + Math.Round(apoyos[i].B, 2) + "mts");
}
acBlkTblRec.AppendEntity(acMText);
acTrans.AddNewlyCreatedDBObject(acMText, true);
}
using (columna[i] = new Polyline())
{
columna[i].AddVertexAt(0, new Point2d(apoyos[i].ColumnaV1X, apoyos[i].ColumnaV1Y), 0, 0, 0);
Point3d punto1 = new Point3d(apoyos[i].ColumnaV1X, apoyos[i].ColumnaV1Y, 0);
columna[i].AddVertexAt(1, new Point2d(apoyos[i].ColumnaV2X, apoyos[i].ColumnaV2Y), 0, 0, 0);
Point3d punto2 = new Point3d(apoyos[i].ColumnaV2X, apoyos[i].ColumnaV2Y, 0);
columna[i].AddVertexAt(2, new Point2d(apoyos[i].ColumnaV4X, apoyos[i].ColumnaV4Y), 0, 0, 0);
columna[i].AddVertexAt(3, new Point2d(apoyos[i].ColumnaV3X, apoyos[i].ColumnaV3Y), 0, 0, 0);
Point3d punto3 = new Point3d(apoyos[i].ColumnaV3X, apoyos[i].ColumnaV3Y, 0);
columna[i].AddVertexAt(4, new Point2d(apoyos[i].ColumnaV1X, apoyos[i].ColumnaV1Y), 0, 0, 0);
Point3d punto4 = new Point3d(apoyos[i].ColumnaV1X, apoyos[i].ColumnaV1Y, 0);
acBlkTblRec.AppendEntity(columna[i]);
acTrans.AddNewlyCreatedDBObject(columna[i], true);
using (RotatedDimension dimc1 = new RotatedDimension())
{
dimc1.XLine1Point = punto1;
dimc1.XLine2Point = punto2;
dimc1.DimLinePoint = new Point3d(0, apoyos[i].ColumnaV1Y + 0.5, 0);
dimc1.DimensionStyle = acCurDb.Dimstyle;
acBlkTblRec.AppendEntity(dimc1);
acTrans.AddNewlyCreatedDBObject(dimc1, true);
}
using (RotatedDimension dimc2 = new RotatedDimension())
{
dimc2.XLine1Point = punto3;
dimc2.XLine2Point = punto4;
dimc2.DimLinePoint = new Point3d(apoyos[i].ColumnaV1X - 0.5, 0, 0);
dimc2.Rotation = Math.PI / 2.0;
dimc2.DimensionStyle = acCurDb.Dimstyle;
acBlkTblRec.AppendEntity(dimc2);
acTrans.AddNewlyCreatedDBObject(dimc2, true);
}
}
}
double[] xCoords = points.Select(p => p.X).Distinct().OrderBy(x => x).ToArray();
double[] yCoords = points.Select(p => p.Y).Distinct().OrderBy(y => y).ToArray();
for (int i = 0; i < yCoords.Length - 1; i++)
{
var dim = new RotatedDimension();
dim.XLine1Point = new Point3d(xCoords[0], yCoords[i], 0.0);
dim.XLine2Point = new Point3d(xCoords[0], yCoords[i + 1], 0.0);
dim.DimLinePoint = new Point3d(xCoords[0] - 1.5, 0.0, 0.0);
dim.Rotation = Math.PI / 2.0;
acBlkTblRec.AppendEntity(dim);
acTrans.AddNewlyCreatedDBObject(dim, true);
}
for (int i = 0; i < xCoords.Length - 1; i++)
{
var dim = new RotatedDimension();
dim.XLine1Point = new Point3d(xCoords[i], yCoords[0], 0.0);
dim.XLine2Point = new Point3d(xCoords[i + 1], yCoords[0], 0.0);
dim.DimLinePoint = new Point3d(0.0, yCoords[0] - 1.5, 0.0);
//ojo, -1.5 porque usualmente esta cota va la ultima fila
dim.Rotation = 0.0;
acBlkTblRec.AppendEntity(dim);
acTrans.AddNewlyCreatedDBObject(dim, true);
}
acTrans.Commit();
}
}
}
}
private void MyMirror(List <Entity> listEnt, Line line, string xY)
{
if (listEnt == null || line == null)
{
return;
}
Line3d line3d = new Line3d(line.StartPoint, line.EndPoint);
for (int i = 0; i < listEnt.Count; i++)
{
var entity = listEnt[i];
Entity ent = entity;
//if((ent as Dimension) != null)
//{
// continue;
//}
if (ent is DBText || ent is MText)
{
listOId.Add(ent.ToSpace(blkRef.Database));
}
else
{
ent = entity.GetTransformedCopy(Matrix3d.Mirroring(line3d));
if ((ent as Dimension) == null)
{
list.Add(ent);
}
//continue;
}
/* var ptMin = ent.Bounds.Value.MinPoint;
*
* var ptMax = ent.Bounds.Value.MaxPoint;
*
* var w = Math.Abs(ptMax.X - ptMin.X);
* var h = Math.Abs(ptMax.Y - ptMin.Y);
*
* var ptCenter = new Point3d((ptMin.X + ptMax.X) / 2, (ptMin.Y + ptMax.Y) / 2, 0);*/
if (ent is DBText)
{
var a = ent as DBText;
MirrorText(a, line3d);
}
else if (ent is MText)
{
var a = ent as MText;
MirrorText(a, line3d);
}
else if ((ent as Dimension) != null)
{
var dim = ent as Dimension;
Plane p = null;
if (xY == "X")
{
p = new Plane(dim.TextPosition, dim.Normal);
ent = dim.GetTransformedCopy(Matrix3d.Mirroring(p));
}
else if (xY == "Y")
{
p = new Plane(dim.TextPosition, dim.Normal);
ent = dim.GetTransformedCopy(Matrix3d.Mirroring(p));
}
if (ent is RotatedDimension)
{
var rDim = ent as RotatedDimension;
var rDim1 = new RotatedDimension(rDim.Rotation, rDim.XLine1Point, rDim.XLine2Point, rDim.DimLinePoint, rDim.DimensionText, rDim.DimensionStyle);
Dim2Dim(rDim1, rDim);
list.Add(rDim1);
}
else if (ent is AlignedDimension)
{
var rDim = ent as AlignedDimension;
var rDim1 = new AlignedDimension(rDim.XLine1Point, rDim.XLine2Point, rDim.DimLinePoint, rDim.DimensionText, rDim.DimensionStyle);
Dim2Dim(rDim1, rDim);
list.Add(rDim1);
}
else if (ent is ArcDimension)
{
var rDim = ent as ArcDimension;
var rDim1 = new ArcDimension(rDim.CenterPoint, rDim.XLine1Point, rDim.XLine2Point, rDim.ArcPoint, rDim.DimensionText, rDim.DimensionStyle);
Dim2Dim(rDim1, rDim);
list.Add(rDim1);
}
else if (ent is DiametricDimension)
{
var rDim = ent as DiametricDimension;
var rDim1 = new DiametricDimension(rDim.ChordPoint, rDim.FarChordPoint, rDim.LeaderLength, rDim.DimensionText, rDim.DimensionStyle);
Dim2Dim(rDim1, rDim);
list.Add(rDim1);
}
else if (ent is LineAngularDimension2)
{
var rDim = ent as LineAngularDimension2;
var rDim1 = new LineAngularDimension2(rDim.XLine1Start, rDim.XLine1End, rDim.XLine2Start, rDim.XLine2End, rDim.ArcPoint, rDim.DimensionText, rDim.DimensionStyle);
Dim2Dim(rDim1, rDim);
list.Add(rDim1);
}
else if (ent is Point3AngularDimension)
{
var rDim = ent as Point3AngularDimension;
var rDim1 = new Point3AngularDimension(rDim.CenterPoint, rDim.XLine1Point, rDim.XLine2Point, rDim.ArcPoint, rDim.DimensionText, rDim.DimensionStyle);
Dim2Dim(rDim1, rDim);
list.Add(rDim1);
}
else if (ent is RadialDimension)
{
var rDim = ent as RadialDimension;
var rDim1 = new RadialDimension(rDim.Center, rDim.ChordPoint, rDim.LeaderLength, rDim.DimensionText, rDim.DimensionStyle);
Dim2Dim(rDim1, rDim);
list.Add(rDim1);
}
else if (ent is RadialDimensionLarge)
{
var rDim = ent as RadialDimensionLarge;
var rDim1 = new RadialDimensionLarge(rDim.Center, rDim.ChordPoint, rDim.OverrideCenter, rDim.JogPoint, rDim.JogAngle, rDim.DimensionText, rDim.DimensionStyle);
Dim2Dim(rDim1, rDim);
list.Add(rDim1);
}
}
}
listEnt.ForEach(ent => ent.Dispose());
}
public static bool Clear(this Dimension obj)
{
bool myFlag = false;
if (Math.Abs(obj.Elevation) >= TOLERANCE)
{
obj.Elevation = 0.0;
myFlag = true;
}
if (obj is AlignedDimension)
{
AlignedDimension myDimension = obj as AlignedDimension;
if (Math.Abs(myDimension.XLine1Point.Z) >= TOLERANCE)
{
myDimension.XLine1Point = myDimension.XLine1Point.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.XLine2Point.Z) >= TOLERANCE)
{
myDimension.XLine2Point = myDimension.XLine2Point.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.DimLinePoint.Z) >= TOLERANCE)
{
myDimension.DimLinePoint = myDimension.DimLinePoint.ClearZ();
myFlag = true;
}
}
else if (obj is ArcDimension)
{
ArcDimension myDimension = obj as ArcDimension;
if (Math.Abs(myDimension.XLine1Point.Z) >= TOLERANCE)
{
myDimension.XLine1Point = myDimension.XLine1Point.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.XLine2Point.Z) >= TOLERANCE)
{
myDimension.XLine2Point = myDimension.XLine2Point.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.Leader1Point.Z) >= TOLERANCE)
{
myDimension.Leader1Point = myDimension.Leader1Point.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.Leader2Point.Z) >= TOLERANCE)
{
myDimension.Leader2Point = myDimension.Leader2Point.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.ArcPoint.Z) >= TOLERANCE)
{
myDimension.ArcPoint = myDimension.ArcPoint.ClearZ();
myFlag = true;
}
}
else if (obj is DiametricDimension)
{
DiametricDimension myDimension = obj as DiametricDimension;
if (Math.Abs(myDimension.ChordPoint.Z) >= TOLERANCE)
{
myDimension.ChordPoint = myDimension.ChordPoint.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.FarChordPoint.Z) >= TOLERANCE)
{
myDimension.FarChordPoint = myDimension.FarChordPoint.ClearZ();
myFlag = true;
}
}
else if (obj is LineAngularDimension2)
{
LineAngularDimension2 myDimension = obj as LineAngularDimension2;
if (Math.Abs(myDimension.ArcPoint.Z) >= TOLERANCE)
{
myDimension.ArcPoint = myDimension.ArcPoint.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.XLine1End.Z) >= TOLERANCE)
{
myDimension.XLine1End = myDimension.XLine1End.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.XLine1Start.Z) >= TOLERANCE)
{
myDimension.XLine1Start = myDimension.XLine1Start.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.XLine2End.Z) >= TOLERANCE)
{
myDimension.XLine2End = myDimension.XLine2End.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.XLine2Start.Z) >= TOLERANCE)
{
myDimension.XLine2Start = myDimension.XLine2Start.ClearZ();
myFlag = true;
}
}
else if (obj is Point3AngularDimension)
{
Point3AngularDimension myDimension = obj as Point3AngularDimension;
if (Math.Abs(myDimension.ArcPoint.Z) >= TOLERANCE)
{
myDimension.ArcPoint = myDimension.ArcPoint.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.CenterPoint.Z) >= TOLERANCE)
{
myDimension.CenterPoint = myDimension.CenterPoint.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.XLine1Point.Z) >= TOLERANCE)
{
myDimension.XLine1Point = myDimension.XLine1Point.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.XLine2Point.Z) >= TOLERANCE)
{
myDimension.XLine2Point = myDimension.XLine2Point.ClearZ();
myFlag = true;
}
}
else if (obj is RadialDimension)
{
RadialDimension myDimension = obj as RadialDimension;
if (Math.Abs(myDimension.Center.Z) >= TOLERANCE)
{
myDimension.Center = myDimension.Center.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.ChordPoint.Z) >= TOLERANCE)
{
myDimension.ChordPoint = myDimension.ChordPoint.ClearZ();
myFlag = true;
}
}
else if (obj is RadialDimensionLarge)
{
RadialDimensionLarge myDimension = obj as RadialDimensionLarge;
if (Math.Abs(myDimension.Center.Z) >= TOLERANCE)
{
myDimension.Center = myDimension.Center.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.ChordPoint.Z) >= TOLERANCE)
{
myDimension.ChordPoint = myDimension.ChordPoint.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.JogPoint.Z) >= TOLERANCE)
{
myDimension.JogPoint = myDimension.JogPoint.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.OverrideCenter.Z) >= TOLERANCE)
{
myDimension.OverrideCenter = myDimension.OverrideCenter.ClearZ();
myFlag = true;
}
}
else if (obj is RotatedDimension)
{
RotatedDimension myDimension = obj as RotatedDimension;
if (Math.Abs(myDimension.DimLinePoint.Z) >= TOLERANCE)
{
myDimension.DimLinePoint = myDimension.DimLinePoint.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.XLine1Point.Z) >= TOLERANCE)
{
myDimension.XLine1Point = myDimension.XLine1Point.ClearZ();
myFlag = true;
}
if (Math.Abs(myDimension.XLine2Point.Z) >= TOLERANCE)
{
myDimension.XLine2Point = myDimension.XLine2Point.ClearZ();
myFlag = true;
}
}
return(myFlag);
}
public void TendonAnnotation()
{
Document doc = Application.DocumentManager.MdiActiveDocument;
Database db = doc.Database;
Editor ed = doc.Editor;
db.SyncDwgToTdGenParas();//设置默认总体参数，已有总体参数字典项则无动作
using (Transaction trans = db.TransactionManager.StartTransaction())
{
#region 1.选择梁顶缘线
PromptEntityOptions tpLineOpt = new PromptEntityOptions("\n选择梁顶缘线");
tpLineOpt.SetRejectMessage("\n顶缘线应为直线、圆弧或多段线");
tpLineOpt.AddAllowedClass(typeof(Line), true); //可以选择直线
tpLineOpt.AddAllowedClass(typeof(Polyline), true); //可以选择多段线
tpLineOpt.AddAllowedClass(typeof(Arc), true); //可以选择圆弧线
PromptEntityResult tpLineRes = ed.GetEntity(tpLineOpt);
if (tpLineRes.Status != PromptStatus.OK)
{
return;
}
ObjectId tpLineId = tpLineRes.ObjectId;
Curve tpLine = trans.GetObject(tpLineId, OpenMode.ForRead) as Curve;
#endregion
#region 2.选择钢束线
PromptEntityOptions tdLineOpt = new PromptEntityOptions("\n选择钢束");
tdLineOpt.SetRejectMessage("\n钢束应为多段线");
tdLineOpt.AddAllowedClass(typeof(Polyline), true);//仅能选择多段线
PromptEntityResult tdLineRes = ed.GetEntity(tdLineOpt);
if (tdLineRes.Status != PromptStatus.OK)
{
return;
}
ObjectId tdLineId = tdLineRes.ObjectId;
Polyline tdLine = trans.GetObject(tdLineId, OpenMode.ForRead) as Polyline;
//判断钢束线是否在顶缘线以内，否则报错返回
if (tdLine.StartPoint.X < tpLine.StartPoint.X || tdLine.EndPoint.X > tpLine.EndPoint.X)
{
Application.ShowAlertDialog("钢束线超出顶缘线，请检查！");
return;
}
tdLine.SetDefaultTendonParams();//设置钢束默认参数，如已有Xrecord信息则无动作
#endregion
#region 3.设置绘图参数（包括张拉方式和工作长度设置）
//3.1 尺寸标注绘图位置及张拉方式和工作长度设置
Point3d pos = new Point3d();//初始化标注点
PromptPointOptions posOpt = new PromptPointOptions("\n设置标注线位置或设置[张拉方式(D)/工作长度(W)]");
posOpt.Keywords.Add("D");
posOpt.Keywords.Add("W");
posOpt.AppendKeywordsToMessage = false; //提示信息中不显示关键字
//获取钢束张拉方式
int tdDrawStyle = 0; //默认为两端张拉
if (!tdLine.ExtensionDictionary.IsNull && tdLine.ObjectId.GetXrecord("DA_Tendons") != null) //如果钢束线有扩展记录则取扩展记录数据
{
tdDrawStyle = (Int16)tdLine.ObjectId.GetXrecord("DA_Tendons")[4].Value;
}
//获取工作长度信息
double workLen = 800;
DBDictionary dicts = db.NamedObjectsDictionaryId.GetObject(OpenMode.ForWrite) as DBDictionary;
if (dicts.Contains("DA_Tendons"))//如果字典中含DA_Tendons的字典项
{
ObjectId tdsDictId = dicts.GetAt("DA_Tendons");
DBDictionary tdsDict = tdsDictId.GetObject(OpenMode.ForRead) as DBDictionary; //获取DA_Tendons字典
ObjectId xrecId = tdsDict.GetAt("workLen"); //获取字典中的工作长度项
Xrecord xrec = xrecId.GetObject(OpenMode.ForRead) as Xrecord; //获取工作长度项中的Xrecird
TypedValueList vls = xrec.Data; //获取Xrecord中的TypedValueList数据
workLen = (double)vls[0].Value; //根据TypedValueList数据中的数值更新工作长度workLen
}
for (;;)
{
PromptPointResult posRes = ed.GetPoint(posOpt);
if (posRes.Status == PromptStatus.Keyword)
{
switch (posRes.StringResult)
{
case "D": //选择修改张拉方式
PromptIntegerOptions drwOpt = new PromptIntegerOptions($"\n输入张拉方式[两端张拉(0)/左端张拉[-1]/右端张拉[1]<{tdDrawStyle}>");
drwOpt.AllowNone = true; //允许ESC退出
PromptIntegerResult drwRes = ed.GetInteger(drwOpt);
if (drwRes.Value == 0)
{
tdDrawStyle = 0;
}
else if (drwRes.Value == -1)
{
tdDrawStyle = -1;
}
else if (drwRes.Value == 1)
{
tdDrawStyle = 1;
}
TypedValueList values = tdLine.ObjectId.GetXrecord("DA_Tendons"); //根据输入更新钢束线的Xrecord记录
values.RemoveAt(4);
values.Add(DxfCode.Int16, tdDrawStyle);
break;
case "W": //修改工作长度
PromptDoubleOptions wklOpt = new PromptDoubleOptions($"\n输入工作长度<{workLen.ToString("F0")}>");
wklOpt.AllowNone = true; //允许ESC退出
PromptDoubleResult wklRes = ed.GetDouble(wklOpt);
if (wklRes.Status == PromptStatus.OK)
{
workLen = wklRes.Value;
ObjectId tdsDictId = dicts.GetAt("DA_Tendons");//更新DA_Tendons字典中的钢束总体参数
DBDictionary tdsDict = tdsDictId.GetObject(OpenMode.ForRead) as DBDictionary;
ObjectId xrecId = tdsDict.GetAt("workLen");
Xrecord xrec = xrecId.GetObject(OpenMode.ForWrite) as Xrecord;
TypedValueList vls = new TypedValueList();
vls.Add(DxfCode.Real, workLen);
xrec.Data = vls;
xrec.DowngradeOpen();
}
break;
}
}
else if (posRes.Status == PromptStatus.OK)
{
pos = posRes.Value;
break;
}
}
//3.2 绘图比例
PromptDoubleOptions scaleOpt = new PromptDoubleOptions($"\n设置绘图比例<{scale}>");
scaleOpt.AllowNone = true; //允许回车，则采用前次比例
scaleOpt.AllowNegative = false; //不允许负值
scaleOpt.AllowZero = false; //不允许零值
PromptDoubleResult scaleRes = ed.GetDouble(scaleOpt); //获取比例
if (scaleRes.Status != PromptStatus.OK && scaleRes.Status != PromptStatus.None)
{
return;
}
else if (scaleRes.Status == PromptStatus.OK)
{
scale = scaleRes.Value;
}
#endregion
#region 4.建立各类标注
List <Point3d> ptsH = new List <Point3d>(); //创建水平标注点集
List <Dimension> dims = new List <Dimension>(); //创建标注集，存放各类标注
for (int i = 0; i < tdLine.NumberOfVertices - 1; i++)
{
//4.1 水平点集
ptsH.Add(tdLine.GetPoint3dAt(i));
//4.2 每段钢束线的长度
//4.3 直线标注角度
//4.4 圆弧线标注半径
if (tdLine.GetSegmentType(i) == SegmentType.Line)
{
LineSegment3d lineSeg = tdLine.GetLineSegmentAt(i);
//4.2 每段钢束线的长度
db.LineLengthDim(lineSeg, scale);
//4.3 直线标注角度
if (tdLine.StartPoint.X < tdLine.EndPoint.X)
{
db.LineAngelDim(lineSeg, !(i == tdLine.NumberOfVertices - 2), scale);
}
else
{
db.LineAngelDim(lineSeg, (i == tdLine.NumberOfVertices - 2), scale);
}
}
else if (tdLine.GetSegmentType(i) == SegmentType.Arc)
{
CircularArc3d arcSeg = tdLine.GetArcSegmentAt(i);
//4.2 每段钢束线的长度
db.ArcLengthDim(arcSeg, scale);
//4.3 圆弧标注半径
db.ArrowRadiusDim(arcSeg, scale);
}
//4.5 竖直距离标注
Ray vRay = new Ray();//建立竖直射线
vRay.BasePoint = tdLine.GetPoint3dAt(i);
vRay.UnitDir = new Vector3d(0, 1, 0);
Point3dCollection ptIntersects = new Point3dCollection();
tpLine.IntersectWith(vRay, Intersect.OnBothOperands, ptIntersects, IntPtr.Zero, IntPtr.Zero);
Point3d ptIntersect = ptIntersects[0];
RotatedDimension dimV = new RotatedDimension();
dimV.XLine1Point = tdLine.GetPoint3dAt(i); //第一条尺寸边线
dimV.XLine2Point = ptIntersect; //第二条尺寸边线
dimV.DimLinePoint = tdLine.GetPoint3dAt(i); //尺寸线位置
dimV.Rotation = Math.PI / 2; //标注旋转90度
dimV.DimensionStyle = db.Dimstyle; //尺寸样式为当前样式
dimV.Dimscale = scale; //设置尺寸全局比例
dims.Add(dimV);
}
//4.1 节点间距点集缺钢束最后一个点、梁顶缘线端点
ptsH.Add(tdLine.EndPoint);
ptsH.Add(tpLine.StartPoint);
ptsH.Add(tpLine.EndPoint);
db.ContinuedHorizontalDims(ptsH, pos, scale);//建立水平连续标注
//4.5 竖直距离标注缺最后一个点
Ray vRayLast = new Ray();//建立竖直射线
vRayLast.BasePoint = tdLine.GetPoint3dAt(tdLine.NumberOfVertices - 1);
vRayLast.UnitDir = new Vector3d(0, 1, 0);
Point3dCollection ptIntersectsLast = new Point3dCollection();
tpLine.IntersectWith(vRayLast, Intersect.OnBothOperands, ptIntersectsLast, IntPtr.Zero, IntPtr.Zero);
Point3d ptIntersectLast = ptIntersectsLast[0];
RotatedDimension dimVLast = new RotatedDimension();
dimVLast.XLine1Point = tdLine.GetPoint3dAt(tdLine.NumberOfVertices - 1); //第一条尺寸边线
dimVLast.XLine2Point = ptIntersectLast; //第二条尺寸边线
dimVLast.DimLinePoint = tdLine.GetPoint3dAt(tdLine.NumberOfVertices - 1); //尺寸线位置
dimVLast.Rotation = Math.PI / 2; //标注旋转90度
dimVLast.DimensionStyle = db.Dimstyle; //尺寸样式为当前样式
dimVLast.Dimscale = scale; //设置尺寸全局比例
dims.Add(dimVLast);
#endregion
#region 5 绘制张拉端
//5.1 获取张拉端几何特征
//获取钢束线真实的起点和终点
Point3d tdStart = (tdLine.StartPoint.X < tdLine.EndPoint.X) ? tdLine.StartPoint : tdLine.EndPoint;
Point3d tdEnd = (tdLine.StartPoint.X < tdLine.EndPoint.X) ? tdLine.EndPoint : tdLine.StartPoint;
//获取钢束线真实的起终点角度
double iclStart = (tdLine.StartPoint.X < tdLine.EndPoint.X) ?
tdLine.GetLineSegmentAt(0).GetAngleOfLineSeg() : tdLine.GetLineSegmentAt(tdLine.NumberOfVertices - 2).GetAngleOfLineSeg();
double iclEnd = (tdLine.StartPoint.X < tdLine.EndPoint.X) ?
tdLine.GetLineSegmentAt(tdLine.NumberOfVertices - 2).GetAngleOfLineSeg() : tdLine.GetLineSegmentAt(0).GetAngleOfLineSeg();
//初始化张拉端图元
Polyline leftDraw = new Polyline();
Polyline rightDraw = new Polyline();
MText lengthL = new MText();
MText lengthR = new MText();
//5.2 左侧张拉端
//5.2.1 两侧张拉或左侧张拉时左端绘制工作长度线
if (tdDrawStyle == 0 || tdDrawStyle == -1)
{
//创建张拉端几何点
Point3d tdDrawL = GeTools.PolarPoint(tdStart, iclStart, -workLen);
//创建张拉段
leftDraw = new Polyline();
leftDraw.AddVertexAt(0, tdStart.ToPoint2d(), 0, 0, 0);
leftDraw.AddVertexAt(1, tdDrawL.ToPoint2d(), 0, 0, 0);
leftDraw.Layer = tdLine.Layer;//张拉段与钢束线应该在同一层
//标注左侧张拉段
lengthL = new MText();
//长度
lengthL.Contents = "工作长度" + workLen.ToString("F0");
//文字高度
lengthL.TextHeight = 3 * scale;
//样式为当前样式
lengthL.TextStyleId = db.Textstyle;
//旋转角度同直线段倾角
lengthL.Rotation = iclStart;
//对齐位置为右上
lengthL.Attachment = AttachmentPoint.TopRight;
//位置为中点垂线以下0.5个单位
lengthL.Location = GeTools.PolarPoint(GeTools.MidPoint(leftDraw.StartPoint,
leftDraw.EndPoint), iclStart - Math.PI / 2, 0.5 * scale);
}
//5.2.2 右侧张拉时绘制P锚标识
else
{
//创建P锚起终点
Point3d tdDrawL1 = GeTools.PolarPoint(tdStart, iclStart + Math.PI / 2, 0.75 * scale);
Point3d tdDrawL2 = GeTools.PolarPoint(tdStart, iclStart + Math.PI / 2, -0.75 * scale);
//创建P锚标志
leftDraw = new Polyline();
leftDraw.AddVertexAt(0, tdDrawL1.ToPoint2d(), 0, 0.35 * scale, 0.35 * scale);
leftDraw.AddVertexAt(1, tdDrawL2.ToPoint2d(), 0, 0.35 * scale, 0.35 * scale);
leftDraw.Layer = tdLine.Layer;//张拉段与钢束线应该在同一层
//标注左侧P锚
lengthL = new MText();
//长度
lengthL.Contents = "P锚";
//文字高度
lengthL.TextHeight = 3 * scale;
//样式为当前样式
lengthL.TextStyleId = db.Textstyle;
//旋转角度同直线段倾角
lengthL.Rotation = iclStart;
//对齐位置为右中
lengthL.Attachment = AttachmentPoint.MiddleRight;
//位置为P锚标志右侧0.5个单位
lengthL.Location = GeTools.PolarPoint(GeTools.MidPoint(leftDraw.StartPoint,
leftDraw.EndPoint), iclStart, -2 * scale);
}
//5.3 右侧张拉端绘制
//5.3.1 两侧张拉或右侧张拉时右端绘制工作长度线
if (tdDrawStyle == 0 || tdDrawStyle == 1)
{
//创建张拉端几何点
Point3d tdDrawR = GeTools.PolarPoint(tdEnd, iclEnd, workLen);
//创建张拉段
rightDraw = new Polyline();
rightDraw.AddVertexAt(0, tdEnd.ToPoint2d(), 0, 0, 0);
rightDraw.AddVertexAt(1, tdDrawR.ToPoint2d(), 0, 0, 0);
rightDraw.Layer = tdLine.Layer;//张拉段与钢束线应该在同一层
//标注右侧张拉段
lengthR = new MText();
//长度
lengthR.Contents = "工作长度" + workLen.ToString("F0");
//文字高度
lengthR.TextHeight = 3 * scale;
//样式为当前样式
lengthR.TextStyleId = db.Textstyle;
//旋转角度同直线段倾角
lengthR.Rotation = iclEnd;
//对齐位置为左上
lengthR.Attachment = AttachmentPoint.TopLeft;
//位置为中点垂线以下0.5个单位
lengthR.Location = GeTools.PolarPoint(GeTools.MidPoint(rightDraw.StartPoint,
rightDraw.EndPoint), iclEnd - Math.PI / 2, 0.5 * scale);
}
//5.2.2 左侧张拉时绘制P锚标识
else//绘制P锚
{
//创建P锚起终点
Point3d tdDrawR1 = GeTools.PolarPoint(tdEnd, iclEnd + Math.PI / 2, 0.75 * scale);
Point3d tdDrawR2 = GeTools.PolarPoint(tdEnd, iclEnd + Math.PI / 2, -0.75 * scale);
//创建P锚标志
rightDraw = new Polyline();
rightDraw.AddVertexAt(0, tdDrawR1.ToPoint2d(), 0, 0.35 * scale, 0.35 * scale);
rightDraw.AddVertexAt(1, tdDrawR2.ToPoint2d(), 0, 0.35 * scale, 0.35 * scale);
rightDraw.Layer = tdLine.Layer;//张拉段与钢束线应该在同一层
//标注左侧P锚
lengthR = new MText();
//长度
lengthR.Contents = "P锚";
//文字高度
lengthR.TextHeight = 3 * scale;
//样式为当前样式
lengthR.TextStyleId = db.Textstyle;
//旋转角度同直线段倾角
lengthR.Rotation = iclEnd;
//对齐位置为左中
lengthR.Attachment = AttachmentPoint.MiddleLeft;
//位置为P锚标志右侧0.5个单位
lengthR.Location = GeTools.PolarPoint(GeTools.MidPoint(rightDraw.StartPoint,
rightDraw.EndPoint), iclEnd, 2 * scale);
}
#endregion
#region 6 在截面顶缘标识“梁顶缘线”
Point3d midPt = GeTools.MidPoint(tpLine.StartPoint, tpLine.EndPoint); //顶缘线起终点中点
Point3d midPtInTp = tpLine.GetClosestPointTo(midPt, Vector3d.YAxis, true); //顶缘线上靠近中点的点
MText tpAnno = new MText();
tpAnno.Contents = "梁顶缘线";
//文字高度
tpAnno.TextHeight = 3 * scale;
//样式为当前样式
tpAnno.TextStyleId = db.Textstyle;
//对齐位置为右上
tpAnno.Attachment = AttachmentPoint.BottomLeft;
//位置为中点以上0.5个单位
tpAnno.Location = GeTools.PolarPoint(midPtInTp, Math.PI / 2, 0.5 * scale);
#endregion
db.AddToModelSpace(dims.ToArray()); //添加各类标注
db.AddToModelSpace(leftDraw, rightDraw, lengthL, lengthR); //添加张拉段线
db.AddToModelSpace(tpAnno); //添加梁顶缘线标识
trans.Commit();
}
}
public void DimTest()
{
Database db = HostApplicationServices.WorkingDatabase;
using (Transaction trans = db.TransactionManager.StartTransaction())
{
// 创建要标注的图形
Line line1 = new Line(new Point3d(30, 20, 0), new Point3d(120, 20, 0));
Line line2 = new Line(new Point3d(120, 20, 0), new Point3d(120, 40, 0));
Line line3 = new Line(new Point3d(120, 40, 0), new Point3d(90, 80, 0));
Line line4 = new Line(new Point3d(90, 80, 0), new Point3d(30, 80, 0));
Arc arc = new Arc(new Point3d(30, 50, 0), 30, Math.PI / 2, Math.PI * 3 / 2);
Circle cir1 = new Circle(new Point3d(30, 50, 0), Vector3d.ZAxis, 15);
Circle cir2 = new Circle(new Point3d(70, 50, 0), Vector3d.ZAxis, 10);
//将图形添加到模型空间中
db.AddToModelSpace(line1, line2, line3, line4, arc, cir1, cir2);
//创建一个列表，用于存储标注对象
List <Dimension> dims = new List <Dimension>();
// 创建转角标注（水平）
RotatedDimension dimRotated1 = new RotatedDimension
{
//指定第一条尺寸界线的附着位置
XLine1Point = line1.StartPoint,
//指定第二条尺寸界线的附着位置
XLine2Point = line1.EndPoint,
//指定尺寸线的位置
DimLinePoint = GeTools.MidPoint(line1.StartPoint, line1.EndPoint).PolarPoint(-Math.PI / 2, 10),
DimensionText = "<>mm" //设置标注的文字为标注值+后缀mm
};
dims.Add(dimRotated1); //将水平转角标注添加到列表中
//创建转角标注(垂直）
RotatedDimension dimRotated2 = new RotatedDimension
{
Rotation = Math.PI / 2, //转角标注角度为90度，表示垂直方向
//指定两条尺寸界线的附着位置和尺寸线的位置
XLine1Point = line2.StartPoint,
XLine2Point = line2.EndPoint,
DimLinePoint = GeTools.MidPoint(line2.StartPoint, line2.EndPoint).PolarPoint(0, 10)
};
dims.Add(dimRotated2);//将垂直转角标注添加到列表中
//创建转角标注（尺寸公差标注）
RotatedDimension dimRotated3 = new RotatedDimension
{
//指定两条尺寸界线的附着位置和尺寸线的位置
XLine1Point = line4.StartPoint,
XLine2Point = line4.EndPoint,
DimLinePoint = GeTools.MidPoint(line4.StartPoint, line4.EndPoint).PolarPoint(Math.PI / 2, 10),
//设置标注的文字为标注值+堆叠文字
DimensionText = TextTools.StackText("<>", "+0.026", "-0.025", StackType.Tolerance, 0.7)
};
dims.Add(dimRotated3);//将尺寸公差标注添加到列表中
// 创建对齐标注
AlignedDimension dimAligned = new AlignedDimension
{
//指定两条尺寸界线的附着位置和尺寸线的位置
XLine1Point = line3.StartPoint,
XLine2Point = line3.EndPoint,
DimLinePoint = GeTools.MidPoint(line3.StartPoint, line3.EndPoint).PolarPoint(Math.PI / 2, 10),
//设置标注的文字为标注值+公差符号
DimensionText = "<>" + TextSpecialSymbol.Tolerance + "0.2"
};
dims.Add(dimAligned);//将对齐标注添加到列表中
// 创建半径标注
RadialDimension dimRadial = new RadialDimension
{
Center = cir1.Center, //圆或圆弧的圆心
//用于附着引线的圆或圆弧上的点
ChordPoint = cir1.Center.PolarPoint(GeTools.DegreeToRadian(30), 15),
LeaderLength = 10 //引线长度
};
dims.Add(dimRadial); //将半径标注添加到列表中
// 创建直径标注
DiametricDimension dimDiametric = new DiametricDimension
{
//圆或圆弧上第一个直径点的坐标
ChordPoint = cir2.Center.PolarPoint(GeTools.DegreeToRadian(45), 10),
//圆或圆弧上第二个直径点的坐标
FarChordPoint = cir2.Center.PolarPoint(GeTools.DegreeToRadian(-135), 10),
LeaderLength = 0 //从 ChordPoint 到注解文字或折线处的长度
};
dims.Add(dimDiametric); //将直径标注添加到列表中
// 创建角度标注
Point3AngularDimension dimLineAngular = new Point3AngularDimension
{
//圆或圆弧的圆心、或两尺寸界线间的共有顶点的坐标
CenterPoint = line2.StartPoint,
//指定两条尺寸界线的附着位置
XLine1Point = line1.StartPoint,
XLine2Point = line2.EndPoint,
//设置角度标志圆弧线上的点
ArcPoint = line2.StartPoint.PolarPoint(GeTools.DegreeToRadian(135), 10)
};
dims.Add(dimLineAngular);//将角度标注添加到列表中
// 创建弧长标注,标注文字取为默认值
ArcDimension dimArc = new ArcDimension(arc.Center, arc.StartPoint, arc.EndPoint, arc.Center.PolarPoint(Math.PI, arc.Radius + 10), "<>", db.Dimstyle);
dims.Add(dimArc);//将弧长标注添加到列表中
// 创建显示X轴值的坐标标注
OrdinateDimension dimX = new OrdinateDimension
{
UsingXAxis = true, //显示 X 轴值
DefiningPoint = cir2.Center, //标注点
//指定引线终点，即标注文字显示的位置
LeaderEndPoint = cir2.Center.PolarPoint(-Math.PI / 2, 20)
};
dims.Add(dimX);//将坐标标注添加到列表中
// 创建显示Y轴值的坐标标注
OrdinateDimension dimY = new OrdinateDimension
{
UsingXAxis = false, //显示Y轴
DefiningPoint = cir2.Center, //标注点
//指定引线终点，即标注文字显示的位置
LeaderEndPoint = cir2.Center.PolarPoint(0, 20)
};
dims.Add(dimY); //将坐标标注添加到列表中
foreach (Dimension dim in dims) //遍历标注列表
{
dim.DimensionStyle = db.Dimstyle; //设置标注样式为当前样式
db.AddToModelSpace(dim); //将标注添加到模型空间中
}
trans.Commit();//提交更改
}
}
public static void GetInfoIndirectas()
{
Document acDoc = Application.DocumentManager.MdiActiveDocument;
Database acCurDb = acDoc.Database;
bool? oked = false;
System.Windows.Window win = new Indirectas();
oked = Application.ShowModalWindow(win);
oked = true;
if (oked.HasValue && oked.Value)
{
Indirectas instance = (Indirectas)win;
List <Indirectas.Apoyo> apoyos;
if (instance.finalizo)
{
apoyos = instance.apoyos;
using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction())
{
BlockTable acBlkTbl;
acBlkTbl = acTrans.GetObject(acCurDb.BlockTableId,
OpenMode.ForRead) as BlockTable;
BlockTableRecord acBlkTblRec;
acBlkTblRec = acTrans.GetObject(acBlkTbl[BlockTableRecord.ModelSpace],
OpenMode.ForWrite) as BlockTableRecord;
Polyline[] acPoly = new Polyline[apoyos.Count];
Polyline[] columna = new Polyline[apoyos.Count];
Point3d[] points = new Point3d[apoyos.Count];
for (int i = 0; i < apoyos.Count; i++)
{
points[i] = new Point3d(apoyos[i].CoordEjeX, apoyos[i].CoordEjeY, 0);
using (acPoly[i] = new Polyline())
{
acPoly[i].AddVertexAt(0, new Point2d(apoyos[i].Vertice1X, apoyos[i].Vertice1Y), 0, 0, 0);
acPoly[i].AddVertexAt(1, new Point2d(apoyos[i].Vertice2X, apoyos[i].Vertice2Y), 0, 0, 0);
acPoly[i].AddVertexAt(2, new Point2d(apoyos[i].Vertice4X, apoyos[i].Vertice4Y), 0, 0, 0);
acPoly[i].AddVertexAt(3, new Point2d(apoyos[i].Vertice3X, apoyos[i].Vertice3Y), 0, 0, 0);
acPoly[i].AddVertexAt(4, new Point2d(apoyos[i].Vertice1X, apoyos[i].Vertice1Y), 0, 0, 0);
acBlkTblRec.AppendEntity(acPoly[i]);
acTrans.AddNewlyCreatedDBObject(acPoly[i], true);
}
using (MText acMText = new MText())
{
acMText.Location = new Point3d(apoyos[i].Vertice3X, apoyos[i].Vertice3Y - 0.2, 0);
acMText.Width = apoyos[i].Vertice2X - apoyos[i].Vertice1X + apoyos[i].DistanciaMinimaEntrePilotes;
acMText.Contents = "-Carga actuante " + apoyos[i].Carga + "Ton \n-Pilotes " + apoyos[i].Pilotes.Count + " ∅" + (apoyos[i].Pilotes[0].Diametro / 100) + "mts \n-Altura del Cabezal " + apoyos[i].GrosorCabezal + "mts \n-Acero Longitudinal " + apoyos[i].NumeroCabillas + " ∅" +
apoyos[i].DiametroTeoricoPulgadas + "” \n-QADM de Grupo " + Math.Round(apoyos[i].QadmisibleGrupo, 2) + "Ton \n-QEST " + Math.Round(apoyos[i].Qestructural, 2) + "Ton \n-Momento en X " + apoyos[i].MtoEnEjeX + "Ton.m \n-Momento en Y " + apoyos[i].MtoEnEjeY + "Ton.m \n-Mayor Carga de Pilote " + Math.Round(apoyos[i].MayorCargaPilote, 2) + "Ton";
acBlkTblRec.AppendEntity(acMText);
acTrans.AddNewlyCreatedDBObject(acMText, true);
}
using (columna[i] = new Polyline())
{
columna[i].AddVertexAt(0, new Point2d(apoyos[i].ColumnaV1X, apoyos[i].ColumnaV1Y), 0, 0, 0);
Point3d punto1 = new Point3d(apoyos[i].ColumnaV1X, apoyos[i].ColumnaV1Y, 0);
columna[i].AddVertexAt(1, new Point2d(apoyos[i].ColumnaV2X, apoyos[i].ColumnaV2Y), 0, 0, 0);
Point3d punto2 = new Point3d(apoyos[i].ColumnaV2X, apoyos[i].ColumnaV2Y, 0);
columna[i].AddVertexAt(2, new Point2d(apoyos[i].ColumnaV4X, apoyos[i].ColumnaV4Y), 0, 0, 0);
columna[i].AddVertexAt(3, new Point2d(apoyos[i].ColumnaV3X, apoyos[i].ColumnaV3Y), 0, 0, 0);
Point3d punto3 = new Point3d(apoyos[i].ColumnaV3X, apoyos[i].ColumnaV3Y, 0);
columna[i].AddVertexAt(4, new Point2d(apoyos[i].ColumnaV1X, apoyos[i].ColumnaV1Y), 0, 0, 0);
Point3d punto4 = new Point3d(apoyos[i].ColumnaV1X, apoyos[i].ColumnaV1Y, 0);
acBlkTblRec.AppendEntity(columna[i]);
acTrans.AddNewlyCreatedDBObject(columna[i], true);
using (RotatedDimension dimc1 = new RotatedDimension())
{
dimc1.XLine1Point = punto1;
dimc1.XLine2Point = punto2;
dimc1.DimLinePoint = new Point3d(0, apoyos[i].ColumnaV1Y + 0.5, 0);
dimc1.DimensionStyle = acCurDb.Dimstyle;
acBlkTblRec.AppendEntity(dimc1);
acTrans.AddNewlyCreatedDBObject(dimc1, true);
}
using (RotatedDimension dimc2 = new RotatedDimension())
{
dimc2.XLine1Point = punto3;
dimc2.XLine2Point = punto4;
dimc2.DimLinePoint = new Point3d(apoyos[i].ColumnaV1X - 0.5, 0, 0);
dimc2.Rotation = Math.PI / 2.0;
dimc2.DimensionStyle = acCurDb.Dimstyle;
acBlkTblRec.AppendEntity(dimc2);
acTrans.AddNewlyCreatedDBObject(dimc2, true);
}
}
Circle[] circle = new Circle[apoyos[i].Pilotes.Count];
for (int j = 0; j < apoyos[i].Pilotes.Count; j++)
{
using (circle[j] = new Circle())
{
circle[j].Center = new Point3d(apoyos[i].Pilotes[j].PosicionX, apoyos[i].Pilotes[j].PosicionY, 0);
circle[j].Radius = apoyos[i].DiametroPilotes / 200;
acBlkTblRec.AppendEntity(circle[j]);
acTrans.AddNewlyCreatedDBObject(circle[j], true);
/*using (RadialDimension acRadDim = new RadialDimension())
* {
* acRadDim.Center = circle[j].Center;
* acRadDim.ChordPoint = new Point3d(apoyos[i].Pilotes[j].PosicionX + circle[j].Radius, apoyos[i].Pilotes[j].PosicionY, 0);
* acRadDim.DimensionStyle = acCurDb.Dimstyle;
* acBlkTblRec.AppendEntity(acRadDim);
* acTrans.AddNewlyCreatedDBObject(acRadDim, true);
*
* }este codigo es para mostrar el diametro del circulo, no hace falta ya que se imprime*/
}
}
}
double[] xCoords = points.Select(p => p.X).Distinct().OrderBy(x => x).ToArray();
double[] yCoords = points.Select(p => p.Y).Distinct().OrderBy(y => y).ToArray();
for (int i = 0; i < yCoords.Length - 1; i++)
{
var dim = new RotatedDimension();
dim.XLine1Point = new Point3d(xCoords[0], yCoords[i], 0.0);
dim.XLine2Point = new Point3d(xCoords[0], yCoords[i + 1], 0.0);
dim.DimLinePoint = new Point3d(xCoords[0] - 1.5, 0.0, 0.0);
dim.Rotation = Math.PI / 2.0;
acBlkTblRec.AppendEntity(dim);
acTrans.AddNewlyCreatedDBObject(dim, true);
}
for (int i = 0; i < xCoords.Length - 1; i++)
{
var dim = new RotatedDimension();
dim.XLine1Point = new Point3d(xCoords[i], yCoords[0], 0.0);
dim.XLine2Point = new Point3d(xCoords[i + 1], yCoords[0], 0.0);
dim.DimLinePoint = new Point3d(0.0, yCoords[0] - 1.5, 0.0);
//ojo, -1.5 porque usualmente esta cota va la ultima fila
dim.Rotation = 0.0;
acBlkTblRec.AppendEntity(dim);
acTrans.AddNewlyCreatedDBObject(dim, true);
}
acTrans.Commit();
}
}
}
}
public void Execute()
{
/// promote:
///
/// CMD
/// 当前设置：对齐坐标 = 世界坐标
/// 选择对象或改变坐标系[世界坐标(W)/用户坐标(U)]:
///
/// 修改完成，共修改[x]个对象
Document doc = Application.DocumentManager.MdiActiveDocument;
Database database = doc.Database;
Editor ed = doc.Editor;
Matrix3d wcs2ucs = ed.CurrentUserCoordinateSystem.Inverse();
ed.WriteMessage(PromoteStatus);
using (Transaction acTrans = database.TransactionManager.StartTransaction())
{
PromptSelectionOptions selOptions = new PromptSelectionOptions();
selOptions.Keywords.Add("WC", "WC", "世界坐标(WC)");
selOptions.Keywords.Add("UC", "UC", "用户坐标(UC)");
selOptions.MessageForAdding = "\n选择对象或" + selOptions.Keywords.GetDisplayString(true);
selOptions.KeywordInput += delegate(object sender, SelectionTextInputEventArgs args)
{
CoordKeyWord = args.Input;
ed.WriteMessage(PromoteStatus);
};
PromptSelectionResult selResult = doc.Editor.GetSelection(selOptions);
if (selResult.Status != PromptStatus.OK)
{
return;
}
SelectionSet selectionSet = selResult.Value;
foreach (SelectedObject selectedObject in selectionSet)
{
if (selectedObject != null)
{
Entity ent = acTrans.GetObject(selectedObject.ObjectId, OpenMode.ForWrite) as Entity;
Debug.Assert(ent != null, nameof(ent) + " != null");
BlockReference blockRef = ent as BlockReference;
if (blockRef != null)
{
blockRef.Position = GetZ0Point(blockRef.Position, wcs2ucs, ed.CurrentUserCoordinateSystem);
continue;
}
DBPoint point = ent as DBPoint;
if (point != null)
{
point.Position = GetZ0Point(point.Position, wcs2ucs, ed.CurrentUserCoordinateSystem);
continue;
}
Circle circle = ent as Circle;
if (circle != null)
{
circle.Center = GetZ0Point(circle.Center, wcs2ucs, ed.CurrentUserCoordinateSystem);
continue;
}
Line line = ent as Line;
if (line != null)
{
line.StartPoint = GetZ0Point(line.StartPoint, wcs2ucs, ed.CurrentUserCoordinateSystem);
line.EndPoint = GetZ0Point(line.EndPoint, wcs2ucs, ed.CurrentUserCoordinateSystem);
continue;
}
Polyline pline = ent as Polyline;
if (pline != null)
{
double elevation = 0;
if (CoordType == CoordTypeEnum.UCS)
{
// 求原点在UCS上的投影点，然后与OCS平面向量（单位向量）点乘则得标高。
Point3d ptUZ = Point3d.Origin.TransformBy(wcs2ucs);
ptUZ = new Point3d(ptUZ.X, ptUZ.Y, 0);
Point3d ptWZ = ptUZ.TransformBy(ed.CurrentUserCoordinateSystem);
Vector3d vec = ptWZ - Point3d.Origin;
elevation = vec.DotProduct(pline.Normal);
}
pline.Elevation = elevation;
continue;
}
RotatedDimension rd = ent as RotatedDimension;
if (rd != null)
{
rd.DimLinePoint = GetZ0Point(rd.DimLinePoint, wcs2ucs, ed.CurrentUserCoordinateSystem);
rd.XLine1Point = GetZ0Point(rd.XLine1Point, wcs2ucs, ed.CurrentUserCoordinateSystem);
rd.XLine2Point = GetZ0Point(rd.XLine2Point, wcs2ucs, ed.CurrentUserCoordinateSystem);
rd.Elevation = GetZ0elevation(wcs2ucs, ed.CurrentUserCoordinateSystem, rd.Normal);
continue;
}
AlignedDimension ad = ent as AlignedDimension;
if (ad != null)
{
ad.DimLinePoint = GetZ0Point(ad.DimLinePoint, wcs2ucs, ed.CurrentUserCoordinateSystem);
ad.XLine1Point = GetZ0Point(ad.XLine1Point, wcs2ucs, ed.CurrentUserCoordinateSystem);
ad.XLine2Point = GetZ0Point(ad.XLine2Point, wcs2ucs, ed.CurrentUserCoordinateSystem);
ad.Elevation = GetZ0elevation(wcs2ucs, ed.CurrentUserCoordinateSystem, ad.Normal);
continue;
}
}
}
acTrans.Commit();
}
}
// draw a rectrangle with dimensions
// nFlag: dimension control
private void DrawSideRectangle(Plate pl, Point3d p0,
double dT, double dL, int nFlag)
{
Point3d[] pt = new Point3d[16]; // geometry helpers
Line[] ln = new Line[16]; // database objects
// create points
pt[0] = p0;
pt[1] = new Point3d(p0.X + dT, p0.Y, p0.Z);
pt[2] = new Point3d(p0.X + dT, p0.Y + dL, p0.Z);
pt[3] = new Point3d(p0.X, p0.Y + dL, p0.Z);
//more points
pt[4] = new Point3d(p0.X, p0.Y + pl.R1, p0.Z);
pt[5] = new Point3d(p0.X + dT, p0.Y + pl.R1, p0.Z);
pt[6] = new Point3d(p0.X, pt[4].Y + pl.L9, p0.Z);
pt[7] = new Point3d(p0.X + dT, pt[4].Y + pl.L9, p0.Z);
pt[8] = new Point3d(p0.X, pt[6].Y + pl.L8, p0.Z);
pt[9] = new Point3d(p0.X + dT, pt[6].Y + pl.L8, p0.Z);
pt[10] = new Point3d(p0.X, pt[8].Y + pl.L7, p0.Z);
pt[11] = new Point3d(p0.X + dT, pt[8].Y + pl.L7, p0.Z);
pt[12] = new Point3d(p0.X, pt[10].Y + pl.L6, p0.Z);
pt[13] = new Point3d(p0.X + dT, pt[10].Y + pl.L6, p0.Z);
pt[14] = new Point3d(p0.X, pt[12].Y + pl.L5, p0.Z);
pt[15] = new Point3d(p0.X + dT, pt[12].Y + pl.L5, p0.Z);
// create lines of the main rectangle and store them into the database
for (int i = 0; i < 4; i++)
{
ln[i] = new Line(pt[i], pt[(i + 1) % 4]);
ln[i].ColorIndex = pl.nColor[CONTOUR]; // 0:index
AcTrans.Add(ln[i]);
}
// create vertical lines
for (int i = 4; i < 15; i += 2)
{
ln[i] = new Line(pt[i], pt[(i + 1)]);
ln[i].ColorIndex = pl.nColor[HIDDEN]; // 0:index
AcTrans.Add(ln[i]);
}
// Draw the horizontal dimension
if ((nFlag & DIMHOR) != 0)
{
RotatedDimension dim = new RotatedDimension();
dim.XLine1Point = pt[0];
dim.XLine2Point = pt[1];
dim.DimLinePoint = new Point3d(pt[0].X, pt[0].Y - pl.dDimLineSp, pt[0].Z);
dim.Dimscale = pl.dDimScale;
dim.ColorIndex = pl.nColor[DIMENSION];
dim.Dimzin = 12; // Suppresses the Decimal Point
AcTrans.Add(dim);
}
// Draw the vertical dimension
if ((nFlag & DIMVER) != 0)
{
RotatedDimension dim = new RotatedDimension();
dim.XLine1Point = pt[1];
dim.XLine2Point = pt[5];
dim.DimLinePoint = new Point3d(pt[1].X + pl.dDimLineSp, pt[1].Y, pt[0].Z);
dim.Rotation = Math.PI / 2.0;
dim.Dimscale = pl.dDimScale;
dim.ColorIndex = pl.nColor[DIMENSION];
dim.Dimzin = 12; // Suppresses the Decimal Point
AcTrans.Add(dim);
for (int i = 5; i < 15; i += 2)
{
RotatedDimension dim1 = new RotatedDimension();
dim1.XLine1Point = pt[i];
dim1.XLine2Point = pt[i + 2];
dim1.DimLinePoint = new Point3d(pt[1].X + pl.dDimLineSp, pt[1].Y, pt[0].Z);
dim1.Rotation = Math.PI / 2.0;
dim1.Dimscale = pl.dDimScale;
dim1.ColorIndex = pl.nColor[DIMENSION];
dim1.Dimzin = 12; // Suppresses the Decimal Point
AcTrans.Add(dim1);
}
RotatedDimension dim2 = new RotatedDimension();
dim2.XLine1Point = pt[15];
dim2.XLine2Point = pt[2];
dim2.DimLinePoint = new Point3d(pt[1].X + pl.dDimLineSp, pt[1].Y, pt[0].Z);
dim2.Rotation = Math.PI / 2.0;
dim2.Dimscale = pl.dDimScale;
dim2.ColorIndex = pl.nColor[DIMENSION];
dim2.Dimzin = 12; // Suppresses the Decimal Point
AcTrans.Add(dim2);
}
}
private void DimToSpace2(List <Point3d> ptArr, List <Dimension> listDim, Point3d pt1, Point3d wrongPt, int indexPt2)
{
RotatedDimension dimOld = null;
RotatedDimension dimOld2 = null;
int indexPt = ptArr.IndexOf(pt1);
Point3d pt3 = Point3d.Origin;
if (indexPt < indexPt2)
{
pt3 = ptArr[Math.Abs((indexPt2 - 1)) % ptArr.Count];
}
else
{
pt3 = ptArr[(indexPt2 + 1) % ptArr.Count];
}
foreach (var d in listDim)
{
if ((d as RotatedDimension) != null)
{
dimOld = d as RotatedDimension;
if ((PtEqual(dimOld.XLine1Point, pt1) && PtEqual(dimOld.XLine2Point, wrongPt)) ||
(PtEqual(dimOld.XLine1Point, wrongPt) && PtEqual(dimOld.XLine2Point, pt1)))
{
dimOld = d as RotatedDimension;
break;
}
else
{
dimOld = null;
}
}
}
foreach (var d in listDim)
{
if ((d as RotatedDimension) != null)
{
dimOld2 = d as RotatedDimension;
if ((PtEqual(dimOld2.XLine1Point, pt3) && PtEqual(dimOld2.XLine2Point, wrongPt)) ||
(PtEqual(dimOld2.XLine1Point, wrongPt) && PtEqual(dimOld2.XLine2Point, pt3)))
{
dimOld2 = d as RotatedDimension;
if (dimOld2 != dimOld)
{
break;
}
else
{
dimOld2 = null;
}
}
else
{
dimOld2 = null;
}
}
}
double dimLen = 20d;
if (null != dimOld)
{
var line = new Line(dimOld.XLine1Point, dimOld.XLine2Point);
var ptDim = dimOld.DimLinePoint;
var ptDim2 = line.GetClosestPointTo(ptDim, true);
var v2 = ptDim - ptDim2;
dimLen = v2.Length;
var ptGet = pt1 + v2;
Vector3d v = pt1 - ptArr[indexPt2];
//var dimNew = new RotatedDimension(0, pt1, ptArr[indexPt2], ptGet, v.Length.ToString(), dimOld.DimensionStyle);
var dimNew = new AlignedDimension(pt1, ptArr[indexPt2], ptGet, v.Length.ToString("f2"), dimOld.DimensionStyle);
Dim2Dim(dimNew, dimOld);
dimNew.ToSpace();
using (var trans = Db.TransactionManager.StartTransaction())
{
var ent = trans.GetObject(dimOld.ObjectId, OpenMode.ForWrite) as Entity;
ent.Erase(true);
trans.Commit();
}
}
if (dimOld2 != null)
{
var line = new Line(dimOld2.XLine1Point, dimOld2.XLine2Point);
var ptDim = dimOld2.DimLinePoint;
var ptDim2 = line.GetClosestPointTo(ptDim, true);
var v2 = ptDim - ptDim2;
dimLen = v2.Length;
var ptGet = ptArr[indexPt2] + v2;
Vector3d v3 = ptArr[indexPt2] - pt3;
//var dimNew2 = new RotatedDimension(0, ptArr[indexPt2], pt3, pt4, v3.Length.ToString(), dimOld2.DimensionStyle);
var dimNew2 = new AlignedDimension(ptArr[indexPt2], pt3, ptGet, v3.Length.ToString("f2"), dimOld2.DimensionStyle);
Dim2Dim(dimNew2, dimOld2);
dimNew2.ToSpace();
using (var trans = Db.TransactionManager.StartTransaction())
{
//var ent = trans.GetObject(dimOld.ObjectId, OpenMode.ForWrite) as Entity;
// ent.Erase(true);
var ent2 = trans.GetObject(dimOld2.ObjectId, OpenMode.ForWrite) as Entity;
ent2.Erase(true);
trans.Commit();
}
}
}
static public void MlineDim()
{
Editor ed = Application.DocumentManager.MdiActiveDocument.Editor;
// pick some point in PS
Point3d p1, p2;
PromptPointResult res = ed.GetPoint("选择第一根线端点。");
if (res.Status != PromptStatus.OK)
{
return;
}
PromptPointResult resend = ed.GetPoint("选择第二根线端点。");
if (resend.Status != PromptStatus.OK)
{
return;
}
p1 = res.Value;
p2 = resend.Value;
Log4NetHelper.WriteInfoLog("第一个点" + p1.ToString() + "\n");
Log4NetHelper.WriteInfoLog("第二个点" + p2.ToString() + "\n");
CadHelper.ClearDict();
PromptSelectionResult acSSPrompt;
Point3d mp1 = Extension.Trans(p1, Extension.CoordSystem.PSDCS, Extension.CoordSystem.DCS);
Point3d mp2 = Extension.Trans(p2, Extension.CoordSystem.PSDCS, Extension.CoordSystem.DCS);
Log4NetHelper.WriteInfoLog("转换后第一个点" + mp1.ToString() + "\n");
Log4NetHelper.WriteInfoLog("转换后第二个点" + mp2.ToString() + "\n");
//acSSPrompt = ed.SelectCrossingWindow(mp1,
// mp2);
ed.SwitchToModelSpace();
TypedValue[] tvs = new TypedValue[] { new TypedValue((int)DxfCode.Start, "LINE") };
SelectionFilter sf = new SelectionFilter(tvs);
acSSPrompt = ed.SelectCrossingWindow(mp1, mp2, sf);
if (acSSPrompt.Status != PromptStatus.OK)
{
Log4NetHelper.WriteInfoLog("没有选择到实体.\n");
return;
}
SelectionSet acSSet = acSSPrompt.Value;
Log4NetHelper.WriteInfoLog("Number of objects selected: " +
acSSet.Count.ToString());
ed.SwitchToPaperSpace();
Document acDoc = Application.DocumentManager.MdiActiveDocument;
Database acCurDb = acDoc.Database;
Vector3dCollection vcs = new Vector3dCollection();
// Start a transaction
Vector3d ev, sv, sbv;
int pii = 0;
Point3d ep1, ep2, pp1, pp2, dp1, dp2;
using (Transaction acTrans = acCurDb.TransactionManager.StartTransaction())
{
BlockTable acBlkTbl;
acBlkTbl = acTrans.GetObject(acCurDb.BlockTableId,
OpenMode.ForRead) as BlockTable;
// Open the Block table record Model space for write
BlockTableRecord acBlkTblRec;
acBlkTblRec = acTrans.GetObject(acBlkTbl[BlockTableRecord.PaperSpace],
OpenMode.ForWrite) as BlockTableRecord;
foreach (ObjectId lid in acSSet.GetObjectIds())
{
var ln = acTrans.GetObject(lid, OpenMode.ForRead) as Line;
if (ln != null)
{
ev = new Vector3d(ln.EndPoint.X, ln.EndPoint.Y, ln.EndPoint.Z);
sv = new Vector3d(ln.StartPoint.X, ln.StartPoint.Y, ln.StartPoint.Z);
sbv = ev.Subtract(sv);
CadHelper.AddVPDict(sbv, ln.EndPoint);
vcs.Add(sbv);
pii = pii + 1;
}
}
if (vcs.Count >= 2)
{
for (int i = 0; i < vcs.Count - 1; i++)
{
if (vcs[i].IsCodirectionalTo(vcs[i + 1]) == true)
{
ep1 = CadHelper.GetEndPoint(vcs[i]);
ep2 = CadHelper.GetEndPoint(vcs[i + 1]);
dp1 = Extension.Trans(ep1, Extension.CoordSystem.WCS, Extension.CoordSystem.DCS);
pp1 = Extension.Trans(dp1, Extension.CoordSystem.DCS, Extension.CoordSystem.PSDCS);
dp2 = Extension.Trans(ep2, Extension.CoordSystem.WCS, Extension.CoordSystem.DCS);
pp2 = Extension.Trans(dp2, Extension.CoordSystem.DCS, Extension.CoordSystem.PSDCS);
// Create the rotated dimension
using (RotatedDimension acRotDim = new RotatedDimension())
{
acRotDim.XLine1Point = pp1;
acRotDim.XLine2Point = pp2;
acRotDim.Rotation = 0;
acRotDim.DimLinePoint = new Point3d(0, 5, 0);
acRotDim.DimensionStyle = acCurDb.Dimstyle;
// Add the new object to Model space and the transaction
acBlkTblRec.AppendEntity(acRotDim);
acTrans.AddNewlyCreatedDBObject(acRotDim, true);
}
// Commit the changes and dispose of the transaction
}
}
}
acTrans.Commit();
}
// Start a transaction
// now to make sure this works for all viewpoints
//ObjectId btId = ed.Document.Database.BlockTableId;
//// create a new DBPoint and add it to model space to show where we picked
//using (DBPoint pnt = new DBPoint(new Point3d(retPoint[0], retPoint[1], retPoint[2])))
//using (BlockTable bt = btId.Open(OpenMode.ForRead) as BlockTable)
//using (BlockTableRecord ms = bt[BlockTableRecord.ModelSpace].Open(OpenMode.ForWrite)
// as BlockTableRecord)
// ms.AppendEntity(pnt);
}
protected RotatedDimension CreateDim(Point3d ptPrev, Point3d ptNext, Point3d ptDimLine,
bool doTrans, Matrix3d trans, int rangeSize = 0, double rotation = 0, bool interlineText = false)
{
if (doTrans)
{
ptPrev = ptPrev.TransformBy(trans);
ptNext = ptNext.TransformBy(trans);
ptDimLine = ptDimLine.TransformBy(trans);
}
var dim = new RotatedDimension(rotation.ToRadians(), ptPrev, ptNext, ptDimLine, "", panelBase.Service.Env.IdDimStyle);
if (rangeSize>0)
{
dim.Suffix = getTextRange(dim.Measurement, rangeSize);
}
if (interlineText)
{
dim.Dimtmove = 0;
dim.Dimtix = true;
}
dim.Dimscale = Settings.Default.SheetScale;
btrDim.AppendEntity(dim);
t.AddNewlyCreatedDBObject(dim, true);
return dim;
}
