private void FormShortcutHighVoltage_Load(object sender, EventArgs e)
{
try
{
buttonCancel.Enabled = false;
buttonOK.Enabled = false;
if (myUart.port_UART.IsOpen)
{
myApi.SendGetHighVoltage();
timerUartRecv.Interval = 1000 * 5;
timerUartRecv.Enabled = true;
}
else
{
}
}
catch (Exception ex)
{
myUart.Pack_Debug_out(null, "Exception" + "[" + ex.ToString() + "]");
}
}
public void UartRecv_Texture(byte[] text, int PackageLen)
{
bool result = false;
int LastSendCmd = myApi.CurrentSendCmd;
try
{
if (DEVICE_CMD_ID.SET_DEV_PAUSE == LastSendCmd)
{
if (myApi.RecvDeviceReady(text))
{
timerUartRecv.Enabled = false;
if (!MeasureStopFlag)
{
myApi.SendStartMeaurePostion(PeakDegree[GroupIndex_Psi]);
timerUartRecv.Interval = 1000 * 30;
timerUartRecv.Enabled = true;
}
else
{
myApi.SendCloseShutter();
}
}
}
else if (DEVICE_CMD_ID.SET_START_MEA_POS == LastSendCmd)
{
if (myApi.RecvDeviceReady(text))
{
timerUartRecv.Enabled = false;
myApi.SendHighVoltageUp(TubeVoltage[GroupIndex_Psi], TubeCurrent[GroupIndex_Psi]);
timerUartRecv.Interval = 1000 * 40;
timerUartRecv.Enabled = true;
}
}
else if (DEVICE_CMD_ID.SET_HIGH_VOLTAGE_UP == LastSendCmd)
{
if (myApi.RecvDeviceReady(text))
{
timerUartRecv.Enabled = false;
Thread.Sleep(5000);
myApi.SendGetHighVoltage();
timerUartRecv.Interval = 1000 * 5;
timerUartRecv.Enabled = true;
}
}
else if (DEVICE_CMD_ID.GET_HIGH_VOLTAGE == LastSendCmd)
{
if (myApi.RecvDeviceReady(text))
{
result = myApi.RecvGetHighVoltage(text);
timerUartRecv.Enabled = false;
if (result)
{
myApi.SendMeasureTime(MeasureTime[GroupIndex_Psi]);
timerUartRecv.Interval = 1000 * 5;
timerUartRecv.Enabled = true;
}
}
}
else if (DEVICE_CMD_ID.SET_MES_TIME == LastSendCmd)
{
if (myApi.RecvDeviceReady(text))
{
timerUartRecv.Enabled = false;
myApi.SendSpeedB(PhiSpeed[GroupIndex_Psi]);
timerUartRecv.Interval = 1000 * 5;
timerUartRecv.Enabled = true;
}
}
else if (DEVICE_CMD_ID.SET_B_SPEED == LastSendCmd)
{
if (myApi.RecvDeviceReady(text))
{
timerUartRecv.Enabled = false;
if (0 == GroupIndex_Psi)
{
myApi.SendOpenShutter();
timerUartRecv.Interval = 1000 * 5;
timerUartRecv.Enabled = true;
}
else
{
myApi.SendAngleA(myApi.AnglePsi[MeasureIndex_Psi]);
timerUartRecv.Interval = 1000 * 30;
timerUartRecv.Enabled = true;
}
}
}
else if (DEVICE_CMD_ID.OPEN_LIGHT_SHUTTER == LastSendCmd)
{
if (myApi.RecvDeviceReady(text))
{
timerUartRecv.Enabled = false;
myApi.SendAngleA(myApi.AnglePsi[MeasureIndex_Psi]);
timerUartRecv.Interval = 1000 * 30;
timerUartRecv.Enabled = true;
}
}
else if (DEVICE_CMD_ID.SET_A_ANGLE == LastSendCmd)
{
if (myApi.RecvDeviceReady(text))
{
timerUartRecv.Enabled = false;
myApi.SendAngleB(0);
timerUartRecv.Interval = 1000 * 30;
timerUartRecv.Enabled = true;
}
}
else if (DEVICE_CMD_ID.SET_B_ANGLE == LastSendCmd)
{
if (myApi.RecvDeviceReady(text))
{
timerUartRecv.Enabled = false;
myApi.SendStartCycleScan(360);
timerUartRecv.Interval = 1000 * 5;
timerUartRecv.Enabled = true;
myApi.RecvDataCount = 0;
myApi.RecvDataTable.Rows.Clear();
ChartRealTimeShowIndex = 0;
myApi.TotalDataCount = (int)(360 / (PhiSpeed[GroupIndex_Psi] * MeasureTime[GroupIndex_Psi]));
myUart.Pack_Debug_out(null, "[Texture] totalcount=" + myApi.TotalDataCount.ToString());
myApi.SSC_RecvDataReadIndex = 0;
myApi.SSC_RecvDataWriteIndex = 0;
myApi.SSC_AnalyzeDataCount = 0;
//myApi.RecvDataTableSaveFileStart(myApi.AnglePsi[MeasureIndex_Psi], MeasureIndex_Psi);
//myApi.Texture_SaveFileStart(FaceExp[GroupIndex_Psi], GroupIndex_Psi, BM[GroupIndex_Psi]);
ChartRealTimeInit();
}
}
else if (DEVICE_CMD_ID.START_SCAN == LastSendCmd)
{
// save data
timerUartRecv.Enabled = false;
myApi.CSB_RecvDataAnalyze(text);
myApi.RecvDataTableUpdate(myApi.SSC_AnalyzeDataArray, myApi.SSC_AnalyzeDataCount);
//myApi.RecvDataTableSaveFileProc(myApi.SSC_AnalyzeDataArray, myApi.SSC_AnalyzeDataCount);
myApi.RecvDataCount += (myApi.SSC_AnalyzeDataCount / 21);
myUart.Pack_Debug_out(null, "[Texture] analyzecount=" + (myApi.SSC_AnalyzeDataCount / 21).ToString() + "totalrecvcount=" + myApi.RecvDataCount.ToString());
myApi.SSC_AnalyzeDataCount = 0;
Array.Clear(myApi.SSC_AnalyzeDataArray, 0, myApi.SSC_AnalyzeDataArray.Length);
if (myApi.RecvDataCount >= myApi.TotalDataCount)
{
Array.Clear(myApi.SSC_RecvDataArray, 0, myApi.SSC_RecvDataArray.Length);
myApi.SSC_RecvDataReadIndex = 0;
myApi.SSC_RecvDataWriteIndex = 0;
//myApi.RecvDataTableSaveFileEnd();
//myApi.Texture_SaveFileEnd();
RecvDataFinishFlag = true;
}
}
else if (DEVICE_CMD_ID.CLOSE_LIGHT_SHUTTER == LastSendCmd)
{
if (myApi.RecvDeviceReady(text))
{
timerUartRecv.Enabled = false;
myApi.SendHighVoltageDown(myApi.DefaultVotage, myApi.DefaultCurrent);
timerUartRecv.Interval = 1000 * 10;
timerUartRecv.Enabled = true;
timerHighVoltage_10min.Enabled = true;
}
}
else if (DEVICE_CMD_ID.SET_HIGH_VOLTAGE_DOWN == LastSendCmd)
{
if (myApi.RecvDeviceReady(text))
{
timerUartRecv.Enabled = false;
// measure end
MeasureStopFlag = true;
}
}
else
{
}
if (DEVICE_CMD_ID.GET_HIGH_VOLTAGE == LastSendCmd)
{
myParentForm.statusBar_HighVoltageUpdate(myApi.recvVoltage, myApi.recvCurrent);
ChartRealTimeShowIndex = 0;
//chartRealTime.Series["射线强度"].Points.Clear();
double xMin = 0;
double xMax = 360;
chartRealTime.ChartAreas["ChartArea1"].AxisX.Maximum = xMax;
chartRealTime.ChartAreas["ChartArea1"].AxisX.Minimum = xMin;
if (MeasureIndex_Psi == 0)
{
dataGridViewClear();
}
}
else if ((DEVICE_CMD_ID.SET_HIGH_VOLTAGE_UP == LastSendCmd) ||
(DEVICE_CMD_ID.SET_HIGH_VOLTAGE_DOWN == LastSendCmd))
{
if ((myApi.TubeVoltage > 0) || (myApi.TubeCurrent > 0))
{
myConfig.SaveWarmUpTime();
}
else
{
}
if (DEVICE_CMD_ID.SET_HIGH_VOLTAGE_UP == LastSendCmd)
{
timerHighVoltage_10min.Enabled = false;
}
else if (DEVICE_CMD_ID.SET_HIGH_VOLTAGE_DOWN == LastSendCmd)
{
if (MeasureStopFlag)
{
MeasureStopFlag = false;
buttonStart.Enabled = true;
buttonStop.Enabled = false;
groupBoxSettings.Enabled = true;
myParentForm.tableLayoutPanel1.Enabled = true;
myParentForm.tableLayoutPanel2.Enabled = true;
//MessageBox.Show("测量结束");
myParentForm.toolStripStatusLabelMeasureStatus.Text = "测量结束";
}
}
myParentForm.statusBar_HighVoltageUpdate(myApi.sendVoltage, myApi.sendCurrent);
}
else if ((DEVICE_CMD_ID.START_SCAN == LastSendCmd) && (myApi.RecvDataCount > 0) && (0 == myApi.DetectorType))
{
ChartRealTimeUpdate();
}
else
{
}
// 接收数据完成
if (RecvDataFinishFlag)
{
RecvDataFinishFlag = false;
PhiMeasureFinish();
}
}
catch (Exception ex)
{
myUart.Pack_Debug_out(null, "Exception" + "[" + ex.ToString() + "]");
}
}
public void UartRecv_DeviceInit(byte[] text, int PackageLen)
{
bool result = false;
int LastSendCmd = myApi.CurrentSendCmd;
try
{
string strRecvData = System.Text.Encoding.Default.GetString(text);
if ((strRecvData.IndexOf("**") >= 0) ||
(myApi.SDD_ErrorState))
{
UartRecv_DeviceError(text, PackageLen);
return;
}
else
{
}
if (DEVICE_CMD_ID.SET_DEV_PAUSE == LastSendCmd)
{
result = myApi.RecvDeviceReady(text);
if (result)
{
timerUartRecv.Enabled = false;
myApi.CheckHostAttachStatus();
timerUartRecv.Interval = 1000 * 5;
timerUartRecv.Enabled = true;
}
}
else if (DEVICE_CMD_ID.CHECK_HOST_ATTACH_STATUS == LastSendCmd)
{
result = myApi.RecvHostAttachStatus(text);
if (result)
{
timerUartRecv.Enabled = false;
myApi.SendGetHighVoltage();
timerUartRecv.Interval = 1000 * 5;
timerUartRecv.Enabled = true;
}
}
else if (DEVICE_CMD_ID.GET_HIGH_VOLTAGE == LastSendCmd)
{
result = myApi.RecvGetHighVoltage(text);
if (result)
{
timerUartRecv.Enabled = false;
}
}
else if (DEVICE_CMD_ID.SET_HIGH_VOLTAGE_UP == LastSendCmd)
{
result = myApi.RecvDeviceReady(text);
if (result)
{
timerUartRecv.Enabled = false;
}
}
else if (DEVICE_CMD_ID.GET_DEV_ZERO_POINT == LastSendCmd)
{
result = myApi.RecvGetDeviceZeroPoint(text);
if (result)
{
timerUartRecv.Enabled = false;
myApi.FiveAxis_GetZeroPoint();
timerUartRecv.Interval = 1000 * 5;
timerUartRecv.Enabled = true;
}
}
else if (DEVICE_CMD_ID.GET_5_AXIS_ZERO_POINT == LastSendCmd)
{
result = myApi.RecvFiveAxis_GetZeroPoint(text);
if (result)
{
timerUartRecv.Enabled = false;
}
}
else if (DEVICE_CMD_ID.SET_SDP == LastSendCmd)
{
result = myApi.RecvDeviceReady(text);
if (result)
{
timerUartRecv.Enabled = false;
}
}
else
{
timerUartRecv.Enabled = false;
}
if (result)
{
if (DEVICE_CMD_ID.GET_HIGH_VOLTAGE == LastSendCmd)
{
buttonDone.Enabled = true;
}
else if (DEVICE_CMD_ID.SET_HIGH_VOLTAGE_UP == LastSendCmd)
{
WarmUpWait();
}
else if (DEVICE_CMD_ID.GET_5_AXIS_ZERO_POINT == LastSendCmd)
{
myApi.SendSetSdp(myApi.DetectorType + 1);
timerUartRecv.Interval = 1000 * 10;
timerUartRecv.Enabled = true;
//if (ZeroPointCheck())
//{
// if (ZeroPointModifyConfirm())
// {
// ZeroPointModifyProc();
// }
// else
// {
// }
//}
//else
//{
//}
}
else if (DEVICE_CMD_ID.SET_SDP == LastSendCmd)
{
if (0 == myApi.DetectorType)
{
// 如果SDD，通信间隔超过60min，等待3min
DetectorInitFinish();
}
else if (1 == myApi.DetectorType)
{
TCPRecv_DeviceInit();
}
else
{
}
}
else
{
}
}
else
{
//string strRecvData = System.Text.Encoding.Default.GetString(text);
//showErrorMessageBox(strRecvData);
}
}
catch (Exception ex)
{
myUart.Pack_Debug_out(null, "Exception" + "[" + ex.ToString() + "]");
}
}