/// <summary>
/// Get the physics position for a specified phase for the ellipse defined by this OrbitData.
/// </summary>
/// <param name="phaseDeg"></param>
/// <param name="relativePos">Return the position relative to the center object, otherwise absolute wolrd value.</param>
/// <returns></returns>
private Vector3 GetPhysicsPositionforEllipse(float phaseDeg, bool relativePos)
{
// C&P from EllipseBase - make common someday
Quaternion ellipse_orientation = Quaternion.AngleAxis(omega_uc, GEConst.zunit) *
Quaternion.AngleAxis(inclination, GEConst.xunit) *
Quaternion.AngleAxis(omega_lc, GEConst.zunit);
float phaseRad = phaseDeg * Mathf.Deg2Rad;
// position object using true anomoly (angle from focus)
// a is really a_scaled when constructed from OrbitEllipse (so scaling has been done)
float r = a * (1f - ecc * ecc) / (1f + ecc * Mathf.Cos(phaseRad));
Vector3 pos = new Vector3(r * Mathf.Cos(phaseRad), r * Mathf.Sin(phaseRad), 0);
// move from XY plane to the orbital plane
Vector3 new_p = ellipse_orientation * pos;
// orbit position is WRT center. Could be adding dynamically to an object in motion, so need current position.
if (!relativePos)
{
Vector3 centerPos = Vector3.zero;
// used by widgets - so need to get explcitly
if (centralMass.engineRef != null)
{
centerPos = GravityEngine.Instance().GetPhysicsPosition(centralMass);
}
else
{
// setup - not yet added to GE
centerPos = centralMass.initialPhysPosition;
}
new_p += centerPos;
}
return(new_p);
}
/// <summary>
/// Calculate an array of orbit positions. Used by the OrbitPredictor, OrbitRenderer and Editor
/// Gimzo to illustrate the hyperbola.
/// </summary>
/// <returns>The positions.</returns>
/// <param name="numPoints">Number points.</param>
public Vector3[] OrbitPositions(int numPoints, Vector3 centerPos, bool doSceneMapping)
{
CalculateRotation();
Vector3[] emptyArray = { new Vector3(0, 0, 0), new Vector3(0, 0, 0) };
// need to have a center to create positions.
if (centerObject == null)
{
centerObject = transform.parent.gameObject;
if (centerObject == null)
{
return(emptyArray);
}
}
Vector3[] points = new Vector3[numPoints];
float theta = -1f * branchDisplayFactor * Mathf.PI;
float dTheta = 2f * Mathf.Abs(theta) / (float)numPoints;
GravityEngine ge = GravityEngine.Instance();
for (int i = 0; i < numPoints; i++)
{
points[i] = PositionForThetaLeftBranch(theta, centerPos);
if (NUtils.VectorNaN(points[i]))
{
points[i] = Vector3.zero;
}
else if (doSceneMapping && ge.mapToScene)
{
points[i] = ge.MapToScene(points[i]);
}
theta += dTheta;
}
return(points);
}
/// <summary>
/// Get the corrected velocity for the lunar course correction.
///
/// This routine should only be called from the correction done callback to ensure
/// the computation has completed.
/// </summary>
/// <param name="v"></param>
public void GetCorrectionVelocity(ref double[] v)
{
GravityEngine.Instance().GetVelocityDouble(spaceship, ref v);
v[0] *= 1 + correctionFinal.correction;
v[1] *= 1 + correctionFinal.correction;
v[2] *= 1 + correctionFinal.correction;
}
/// <summary>
/// Detach the active stage and enable the next one if present.
/// </summary>
private void DropStage()
{
// automatic staging when a preceeding stage runs out of fuel (engine still on)
if (multiStage.activeStage < multiStage.numStages)
{
// release stage as child, add to GravityEngine
GameObject spentStage = stages[multiStage.activeStage];
spentStage.transform.parent = null;
// add an NBody component,so GE can manage the stage
NBody nbody = spentStage.AddComponent <NBody>();
nbody.initialPos = spentStage.transform.position;
nbody.vel = shipNbody.vel;
// Add an atmosphere model, copy general values from rocket and then adjust
EarthAtmosphere stageAtmosphere = spentStage.AddComponent <EarthAtmosphere>();
stageAtmosphere.InitFrom(atmosphere, nbody);
stageAtmosphere.coeefDrag = multiStage.coeefDrag[multiStage.activeStage];
stageAtmosphere.crossSectionalArea = multiStage.crossSectionalArea[multiStage.activeStage];
stageAtmosphere.inertialMassKg = multiStage.massStageEmpty[multiStage.activeStage];
GravityEngine.Instance().AddBody(spentStage);
// activate the next stage
multiStage.NextStage();
multiStage.SetEngine(true);
GravityEngine.Instance().TrajectoryRestart();
DisplayManager.Instance().DisplayMessage("Staging");
}
else
{
multiStage.SetEngine(false);
DisplayManager.Instance().DisplayMessage("Engine Shutdown");
}
}
/// <summary>
/// Detach the active stage and enable the next one if present.
/// </summary>
private void DropStage()
{
// automatic staging when a preceeding stage runs out of fuel (engine still on)
if (multiStage.activeStage < multiStage.numStages)
{
// release stage as child, add to GravityEngine
GameObject spentStage = stages[multiStage.activeStage];
spentStage.transform.parent = null;
spentStage.AddComponent <NBody>();
NBody nbody = spentStage.GetComponent <NBody>();
nbody.initialPos = spentStage.transform.position;
nbody.vel = shipNbody.vel;
GravityEngine.Instance().AddBody(spentStage);
// activate the next stage
multiStage.NextStage();
multiStage.SetEngine(true);
GravityEngine.Instance().TrajectoryRestart();
DisplayManager.Instance().DisplayMessage("Staging");
}
else
{
multiStage.SetEngine(false);
DisplayManager.Instance().DisplayMessage("Engine Shutdown");
}
}
public void KeplerVsTimeOfFlight()
{
// Need to make sure TOF < 1 period
const float mass = 100f;
GameObject star = TestSetupUtils.CreateNBody(mass, new Vector3(0, 0, 0));
NBody starNbody = star.GetComponent <NBody>();
const float orbitRadius = 10f;
GameObject planet = TestSetupUtils.CreatePlanetInOrbitUniversal(starNbody, 1f, orbitRadius);
OrbitUniversal orbitU = planet.GetComponent <OrbitUniversal>();
// Parabola (ecc=1.0 fails, need to investigate)
float[] ecc_values = { 0.0f, 0.1f, 0.5f, 0.9f, 1.2f, 1.5f };
foreach (float ecc in ecc_values)
{
Debug.LogFormat("======= ecc={0} =======", ecc);
orbitU.eccentricity = ecc;
orbitU.p = 10f;
orbitU.evolveMode = OrbitUniversal.EvolveMode.KEPLERS_EQN;
// Evolve to position r1
double time = 5.0;
TestSetupUtils.SetupGravityEngine(star, planet);
double[] r1 = new double[] { 0, 0, 0 };
// orbitU.PreEvolve(pscale, mscale);
// Ugh. Need to do this before call evolve, since it caches the value.
Vector3d r0_vec = GravityEngine.Instance().GetPositionDoubleV3(planet.GetComponent <NBody>());
orbitU.Evolve(time, ref r1);
Vector3d r1_vec = new Vector3d(ref r1);
// check time to r1
double time_test = orbitU.TimeOfFlight(r0_vec, r1_vec);
Debug.LogFormat("check r0={0} to r1={1} p ={2} after t={3} TOF => {4}",
r0_vec, r1_vec, orbitU.p, time, time_test);
Assert.IsTrue(GEUnit.DoubleEqual(time, time_test, 1E-4));
}
}
// Check eccentricity and inclination
public void CheckTestRV()
{
const float mass = 1000f;
GameObject star = TestSetupUtils.CreateNBody(mass, new Vector3(0, 0, 0));
NBody starNbody = star.GetComponent <NBody>();
const float orbitRadius = 10f;
GameObject planet = TestSetupUtils.CreatePlanetInOrbitUniversal(starNbody, 1f, orbitRadius);
OrbitUniversal orbitU = planet.GetComponent <OrbitUniversal>();
orbitU.eccentricity = .25f;
orbitU.inclination = 25f;
orbitU.omega_uc = 10f;
orbitU.omega_lc = 20f;
orbitU.phase = 190f;
orbitU.SetMajorAxisInspector(orbitRadius);
OrbitData od = new OrbitData();
od.a = orbitRadius;
od.ecc = 0.25f;
od.inclination = 25f;
od.omega_uc = 10f;
od.omega_lc = 20f;
od.phase = 190f;
od.centralMass = starNbody;
GravityEngine.Instance().UnitTestAwake();
Debug.LogFormat("major-axis: {0} vs {1}", orbitU.GetMajorAxisInspector(), orbitRadius);
Assert.AreEqual(orbitU.GetMajorAxisInspector(), orbitRadius);
TestRV(od, planet, starNbody, orbitRadius);
}
// Update is called once per frame
void Update()
{
if (Input.GetKeyUp(KeyCode.H))
{
OrbitData shipOrbit = new OrbitData();
shipOrbit.SetOrbitForVelocity(shipNbody, centerNbody);
OrbitData targetOrbit = new OrbitData();
targetOrbit.SetOrbitForVelocity(targetNbody, centerNbody);
// determine the transfer
orbitTransfer = new HohmannXfer(shipOrbit, targetOrbit, rendezvous);
// If this is a ship with a Kepler sequence take the maneuvers and add them as KeplerSequence elements
// This allows the transfer to be time-reversible if the whole scene is on rails.
if (keplerSeq != null)
{
keplerSeq.AddManeuvers(orbitTransfer.GetManeuvers());
}
else
{
// Nbody evolution (or plain onRails w/o KeplerSequence) use maneuvers
foreach (Maneuver m in orbitTransfer.GetManeuvers())
{
GravityEngine.Instance().AddManeuver(m);
}
}
// Maneuver markers
if (markerPrefab != null)
{
foreach (Maneuver m in orbitTransfer.GetManeuvers())
{
// set maneuver position marker
GameObject marker = Instantiate(markerPrefab, centerNbody.gameObject.transform, true);
marker.transform.position = m.physPosition.ToVector3();
markers.Add(marker);
m.onExecuted = RemoveMarker;
}
}
}
if (Input.GetKeyUp(KeyCode.C))
{
// clear maneuvers
GravityEngine.Instance().ClearManeuvers();
// delete on rails maneuvers
if (keplerSeq != null)
{
keplerSeq.RemoveManeuvers(orbitTransfer.GetManeuvers());
}
foreach (GameObject marker in markers)
{
Destroy(marker);
}
markers.Clear();
}
// optionally report time to next maneuver
// for now just do first maneuver
if ((timeToManeuverText != null) && (orbitTransfer != null))
{
double time = orbitTransfer.GetManeuvers()[0].worldTime - GravityEngine.Instance().GetPhysicalTime();
timeToManeuverText.text = string.Format("Time to Next Maneuver = {0:0.00}", time);
}
}
// Use this for initialization
void Start()
{
if (GetComponent <NBody>() == null)
{
Debug.LogError("Component must be attached to object with an NBody attached.");
return;
}
// Check all the prefabs have NBody and OrbitEllipse components
foreach (GameObject g in planetPrefabs)
{
if (g.GetComponent <NBody>() == null)
{
Debug.LogError("Prefab " + g.name + " missing component NBody");
return;
}
if (g.GetComponent <OrbitEllipse>() == null)
{
Debug.LogError("Prefab " + g.name + " missing component OrbitEllipse");
return;
}
}
for (int i = 0; i < numPlanets; i++)
{
AddBody();
}
GravityEngine.Instance().SetEvolve(true);
ClearAllTrails();
}
/// <summary>
/// Mark intercepts with the designated symbols and return a list of intercepts found
/// for the predicted path of ship intersecting with the path of the target.
/// </summary>
///
/// <param name="ship">The ship</param>
/// <param name="target">The target</param>
///
/// <returns>The intercepts.</returns>
private List <TrajectoryData.Intercept> MarkIntercepts(SpaceshipController shipCtrl, NBody target)
{
// delta distance is scale dependent. For now use an ugly *if*
float deltaDistance = 1f;
if (GravityEngine.Instance().units == GravityScaler.Units.ORBITAL)
{
deltaDistance = 20f;
}
const float deltaTime = 2f;
const float rendezvousDT = 1f;
trajIntercepts.spaceship = shipCtrl.GetTrajectory();
Trajectory trajectory = target.GetComponentInChildren <Trajectory>();
if (trajectory == null)
{
Debug.LogError("Target requires a child with a trajectory component");
return(new List <TrajectoryData.Intercept>());
}
trajIntercepts.target = trajectory;
trajIntercepts.ComputeAndMarkIntercepts(deltaDistance, deltaTime, rendezvousDT);
intercepts = trajIntercepts.GetIntercepts();
return(intercepts);
}
public string ApproachPrediction(string moonName)
{
// @TODO: Too much C&P!
// Step 1: Determine the patched conic xfer
OrbitData shipOrbit = new OrbitData();
NBody shipNbody = spaceshipCtrl.GetNBody();
shipOrbit.SetOrbit(shipNbody, centralMass);
OrbitData moonOrbit = new OrbitData();
NBody moonNbody = GetTargetByName(moonName);
moonOrbit.SetOrbit(moonNbody, centralMass);
//Make a copy of the universe state and evolve forward to find min distance to
// moon.
GravityEngine ge = GravityEngine.Instance();
GravityState gs = ge.GetGravityStateCopy();
// run a simulation and find the closest approach (Expensive!)
LunarCourseCorrection lcc = new LunarCourseCorrection(shipNbody, moonNbody);
// want to be within 10% of Earth-Moon distance, before start checking
courseCorrectionData = new LunarCourseCorrection.CorrectionData();
courseCorrectionData.gravityState = gs;
courseCorrectionData.approachDistance = 0.1f * moonOrbit.a;;
courseCorrectionData.correction = 0;
courseCorrectionData.maxPhysTime = time_to_moon_phys;
lcc.ClosestApproachAsync(courseCorrectionData, MoonPreviewCompleted);
return("Calculation started...\n");
}
private void TestRV(OrbitData od, GameObject planet, GameObject star, float orbitRadius)
{
GameObject testPlanet = TestSetupUtils.CreatePlanetInOrbit(star, 1f, orbitRadius);
OrbitEllipse testEllipse = testPlanet.GetComponent <OrbitEllipse>();
// Run init explicitly to update transform details
testEllipse.InitFromOrbitData(od);
// Awkward but cannot add a new object to GE when it is stopped, so re-add all three
GravityEngine ge = GravityEngine.Instance();
ge.Clear();
ge.AddBody(star);
ge.AddBody(planet);
ge.AddBody(testPlanet);
ge.Setup();
ge.LogDump();
Vector3 r_od = ge.GetPhysicsPosition(testPlanet.GetComponent <NBody>());
Vector3 v_od = ge.GetVelocity(testPlanet);
Vector3 r_i = ge.GetPhysicsPosition(planet.GetComponent <NBody>());
Vector3 v_i = ge.GetVelocity(planet);
Debug.Log(" r_i=" + r_i + " r_od=" + r_od + " delta=" + Vector3.Distance(r_i, r_od));
Debug.Log(" v_i=" + v_i + " v_od=" + v_od + " delta=" + Vector3.Distance(v_i, v_od));
Assert.IsTrue(FloatEqual(Vector3.Distance(r_i, r_od), 0f, 1E-2));
Assert.IsTrue(FloatEqual(Vector3.Distance(v_i, v_od), 0f, 1E-2));
}
// Check eccentricity and inclination
public void CheckTestRV()
{
const float mass = 1000f;
GameObject star = TestSetupUtils.CreateNBody(mass, new Vector3(0, 0, 0));
const float orbitRadius = 10f;
GameObject planet = TestSetupUtils.CreatePlanetInOrbit(star, 1f, orbitRadius);
OrbitEllipse orbitEllipse = planet.GetComponent <OrbitEllipse>();
orbitEllipse.ecc = .25f;
orbitEllipse.inclination = 25f;
orbitEllipse.omega_uc = 10f;
orbitEllipse.omega_lc = 20f;
orbitEllipse.phase = 190f;
OrbitData od = new OrbitData();
od.a = orbitRadius;
od.ecc = 0.25f;
od.inclination = 25f;
od.omega_uc = 10f;
od.omega_lc = 20f;
od.phase = 190f;
GravityEngine.Instance().UnitTestAwake();
TestRV(od, planet, star, orbitRadius);
}
void Update()
{
if (Input.GetKeyDown(KeyCode.C))
{
GravityEngine.Instance().Clear();
Debug.Log("Clear all bodies");
List <GameObject>[] lists = { moonObjects,
hyperObjects,
fixedObjects,
massiveObjects,
masslessObjects,
keplerObjects,
binaryObjects,
dustObjects };
foreach (List <GameObject> l in lists)
{
foreach (GameObject g in l)
{
Destroy(g);
}
l.Clear();
}
}
if (runChaosMonkey)
{
RunChaosMonkey();
}
}
private void TestRV(OrbitData od, GameObject planet, GameObject star)
{
GameObject testPlanet = TestSetupUtils.CreatePlanetInHyper(star, 1f);
testPlanet.name = "TestPlanet";
OrbitHyper testHyper = testPlanet.GetComponent <OrbitHyper>();
testHyper.InitFromOrbitData(od);
planet.name = "Planet";
// Awkward but cannot add a new object to GE when it is stopped, so re-add all three
GravityEngine ge = GravityEngine.Instance();
ge.Clear();
ge.AddBody(star);
ge.AddBody(planet);
ge.AddBody(testPlanet);
ge.Setup();
ge.LogDump();
Vector3 r_od = ge.GetPhysicsPosition(testPlanet.GetComponent <NBody>());
Vector3 v_od = ge.GetVelocity(testPlanet);
Vector3 r_i = ge.GetPhysicsPosition(planet.GetComponent <NBody>());
Vector3 v_i = ge.GetVelocity(planet);
Debug.Log(" r_i=" + r_i + " r_od=" + r_od + " delta=" + Vector3.Distance(r_i, r_od));
Debug.Log(" v_i=" + v_i + " v_od=" + v_od + " delta=" + Vector3.Distance(v_i, v_od));
Assert.IsTrue(FloatEqual(Vector3.Distance(r_i, r_od), 0f, 5E-2));
Assert.IsTrue(FloatEqual(Vector3.Distance(v_i, v_od), 0f, 5E-2));
}
// Use this for initialization
void Start()
{
ge = GravityEngine.Instance();
// scale to GE time base
timeRangePhysical = timeRange;
}
void Update()
{
// space toggles evolution
if (Input.GetKeyDown(KeyCode.Space))
{
GravityEngine.Instance().SetEvolve(!GravityEngine.Instance().GetEvolve());
}
DateTime newTime = SolarUtils.DateForEpoch(solarSystem.GetStartEpochTime());
newTime += GravityScaler.GetTimeSpan(GravityEngine.Instance().GetPhysicalTimeDouble(), GravityScaler.Units.SOLAR);
//currentTime.text = newTime.ToString("yyyy:MM:dd"); // 24h format
//currentTime.text = newTime.ToString("yyyy:MM:dd HH:mm:ss");
CurrentDate.SetText(newTime.ToString("yyyy:MM:dd HH:mm:ss"));
CurrentDateHighlighted.SetText(newTime.ToString("yyyy:MM:dd HH:mm:ss"));
// ICK! Need to wait until GE moves these objects before can clear the trail
if (clearTrail)
{
if (clearTrailDelay-- <= 0)
{
ResetTrails();
clearTrail = false;
}
}
}
// Use this for initialization
// Start() NOT Awake() to ensure that objects created on the fly can have centerBody etc. assigned
// Awake is called from within Object.Instatiate()
void Start()
{
nbody = body.GetComponent <NBody>();
if (nbody == null)
{
Debug.LogWarning("Cannot show orbit - Body requires NBody component");
return;
}
if (centerBody == null)
{
Debug.LogError("Center body is null " + gameObject.name);
}
if (body == null)
{
Debug.LogError("Body is null " + gameObject.name);
}
aroundNBody = centerBody.GetComponent <NBody>();
orbitU.SetNBody(nbody);
orbitU.centerNbody = aroundNBody;
ge = GravityEngine.Instance();
lineR = GetComponent <LineRenderer>();
lineR.positionCount = numPoints + 2 * numPlaneProjections;
}
private void TestRV(OrbitData od, GameObject planet, NBody starNbody, float orbitRadius)
{
GameObject testPlanet = TestSetupUtils.CreatePlanetInOrbitUniversal(starNbody, 1f, orbitRadius);
OrbitUniversal orbitU = testPlanet.GetComponent <OrbitUniversal>();
// Run init explicitly to update transform details
orbitU.InitFromOrbitData(od, 0);
// Awkward but previously could not add a new object to GE when it is stopped, so re-add all three
// Leave as is, since it works!
GravityEngine ge = GravityEngine.Instance();
ge.Clear();
ge.AddBody(starNbody.gameObject);
ge.AddBody(planet);
ge.AddBody(testPlanet);
ge.Setup();
ge.LogDump();
Vector3 r_od = ge.GetPhysicsPosition(testPlanet.GetComponent <NBody>());
Vector3 v_od = ge.GetVelocity(testPlanet);
Vector3 r_i = ge.GetPhysicsPosition(planet.GetComponent <NBody>());
Vector3 v_i = ge.GetVelocity(planet);
Debug.Log(" r_i=" + r_i + " r_od=" + r_od + " delta=" + Vector3.Distance(r_i, r_od));
Debug.Log(" v_i=" + v_i + " v_od=" + v_od + " delta=" + Vector3.Distance(v_i, v_od));
Assert.IsTrue(GEUnit.FloatEqual(Vector3.Distance(r_i, r_od), 0f, 1E-2));
Assert.IsTrue(GEUnit.FloatEqual(Vector3.Distance(v_i, v_od), 0f, 1E-2));
}
private void ComputeTransfer()
{
Vector3d r_from = GravityEngine.Instance().GetPositionDoubleV3(spaceship);
Vector3d r_to = new Vector3d(targetPoint.transform.position);
OrbitData shipOrbit = new OrbitData();
shipOrbit.SetOrbitForVelocity(spaceship, centralMass);
// compute the min energy path (this will be in the short path direction)
lambertU = new LambertUniversal(shipOrbit, r_from, r_to, shortPath);
// apply any time of flight change
double t_flight = tflightFactor * lambertU.GetTMin();
bool reverse = !shortPath;
const bool df = false;
const int nrev = 0;
int error = lambertU.ComputeXfer(reverse, df, nrev, t_flight);
if (error != 0)
{
Debug.LogWarning("Lambert failed to find solution.");
maneuverSegment.gameObject.SetActive(false);
return;
}
Vector3 dv = lambertU.GetTransferVelocity() - GravityEngine.Instance().GetVelocity(spaceship);
dvText.text = string.Format("dV = {0:00.00} Time={1:00.00}", dv.magnitude, t_flight);
maneuverOrbitPredictor.SetVelocity(lambertU.GetTransferVelocity());
maneuverSegment.gameObject.SetActive(true);
maneuverSegment.SetDestination(r_to.ToVector3());
maneuverSegment.SetVelocity(lambertU.GetTransferVelocity());
}
// Use this for initialization
void Start()
{
ge = GravityEngine.Instance();
x_axis = new Vector3d(1, 0, 0);
// mass scaling will cancel in this ratio
soiRadius = OrbitUtils.SoiRadius(planet, moonBody);
// TODO: allow moon to be OrbitUniversal as well.
OrbitUniversal moonOrbit = moonBody.gameObject.GetComponent <OrbitUniversal>();
if (moonOrbit == null)
{
Debug.LogError("Moon is required to have OrbitUniversal");
}
moonRadius = moonOrbit.GetMajorAxis();
shipOrbit = spaceship.GetComponent <OrbitUniversal>();
if (shipOrbit == null)
{
Debug.LogError("Require that the ship have an OrbitU");
}
if (shipOrbit.evolveMode != OrbitUniversal.EvolveMode.KEPLERS_EQN)
{
Debug.LogError("Controller requires ship on-rails but spaceship is off-rails");
}
// assuming circular orbit for ship
shipRadius = shipOrbit.GetApogee();
shipOrbitPredictor = spaceship.GetComponentInChildren <OrbitPredictor>();
}
// Use this for initialization
void Start()
{
GravityEngine ge = GravityEngine.Instance();
time.text = string.Format(time_format, ge.GetTimeWorldSeconds(), ge.GetTimeZoom());
Vector3 pos = ship.initialPos;
position.text = string.Format(pos_format, pos.x, pos.y, pos.z);
velocity.text = string.Format(vel_format, 0f, 0f, 0f);
if (rocketEngine == null)
{
Debug.LogError("Need a rocket component");
}
fuelText.text = string.Format(fuel_format, rocketEngine.GetFuel());
attitude.text = string.Format(attitude_format, 0f, 0f, 0f);
// assume earth at (0,0,0)
initial_altitude = Vector3.Magnitude(ship.transform.position) - (float)atmosphere.heightEarthSurface;
altitude.text = string.Format(altitude_format, initial_altitude);
if (drag != null)
{
drag.text = string.Format(drag_format, atmosphere.GetAccelSI());
}
if (accel != null)
{
accel.text = string.Format(accel_format, earthRocket.GetAccel());
}
if (thrust != null)
{
thrust.text = string.Format(thrust_format, 100f);
}
}
// Use this for initialization
void Start()
{
if (GetComponent <NBody>() != null)
{
Debug.LogWarning("Trajectory should be attached to a child of an Nbody (not directly)");
}
// If text, check for canvas
if (textPrefab != null)
{
if (GravityEngine.instance.trajectoryCanvas == null)
{
Debug.LogError("Text labels require GravityEngine trajectory Canvas be configured");
}
else
{
canvas = GravityEngine.instance.trajectoryCanvas.GetComponent <Canvas>();
if (canvas == null)
{
Debug.LogError("No canvas component on " + GravityEngine.instance.trajectoryCanvas.name);
}
}
}
ge = GravityEngine.Instance();
}
public void SetTextInfo(float fuel, Vector3 angles)
{
GravityEngine ge = GravityEngine.Instance();
time.text = string.Format(time_format, ge.GetTimeWorldSeconds(), ge.GetTimeZoom());
double[] r = new double[3];
double[] v = new double[3];
GravityEngine.Instance().GetPositionVelocityScaled(ship, ref r, ref v);
position.text = string.Format(pos_format, r[0], r[1], r[2]);
velocity.text = string.Format(vel_format, v[0], v[1], v[2]);
fuelText.text = string.Format(fuel_format, fuel);
attitude.text = string.Format(attitude_format, angles.y, angles.x, angles.z);
altitudeNow = Vector3.Magnitude(ship.transform.position) - (float)atmosphere.heightEarthSurface;
altitude.text = string.Format(altitude_format, altitudeNow);
if (drag != null)
{
drag.text = string.Format(drag_format, atmosphere.GetAccelSI());
}
if (accel != null)
{
accel.text = string.Format(accel_format, earthRocket.GetAccel());
}
if (thrust != null)
{
thrust.text = string.Format(thrust_format, rocketEngine.GetThrottlePercent());
}
}
// Vallado Algorithm 10, p118
// (generic, will work for Ellipse as well, provided special cases are handled)
// Not used yet.
private void SetInitialPosition(NBody nbody)
{
// phase is in
float denom = 1 + ecc * Mathf.Cos(phase_nu);
Vector3 r_pqw = new Vector3(p * Mathf.Cos(phase_nu) / denom, p * Mathf.Sin(phase_nu) / denom, 0);
r_initial_phy = r_pqw.magnitude;
Vector3 r = hyper_orientation * r_pqw;
// orbit position is WRT center. Could be adding dynamically to an object in motion, so need current position.
Vector3 centerPos = Vector3.zero;
// used by widgets - so need to get explcitly
centerNbody = OrbitUtils.GetCenterNbody(this.transform, centerObject);
if (centerNbody.engineRef != null)
{
centerPos = GravityEngine.Instance().GetPhysicsPosition(centerNbody);
}
else
{
// setup - not yet added to GE
centerPos = centerNbody.initialPhysPosition;
}
nbody.initialPhysPosition = r + centerPos;
}
public static float ScalePeriod(float period)
{
float lengthScale = GravityEngine.Instance().GetLengthScale();
float massScale = GravityEngine.Instance().massScale;
return(Mathf.Sqrt(lengthScale * lengthScale * lengthScale) / Mathf.Sqrt(massScale) * period);
}
// Update is called once per frame
void Update()
{
if (Input.GetKeyUp(KeyCode.W))
{
GravityEngine.Instance().ApplyImpulse(ship, thrust * Vector3.up);
}
}
public void SetupBodies()
{
if (transform.childCount != 2)
{
// Binary must have 2 NBody children
Debug.LogError("Must have exactly two Nbody objects attached");
return;
}
body1 = transform.GetChild(0).GetComponent <NBody>();
body2 = transform.GetChild(1).GetComponent <NBody>();
if (body1 == null || body2 == null)
{
Debug.LogError("Binary requires children to have NBody scripts attached.");
return;
}
if (transform.parent)
{
binaryNbody = transform.parent.GetComponent <NBody>();
if (binaryNbody)
{
binaryNbody.InitPosition(GravityEngine.Instance());
cmPosition = GravityEngine.Instance().GetPhysicsPosition(binaryNbody);
}
}
// mass is scaled by GE
float m_total = (body1.mass + body2.mass);
float mu1 = body1.mass / m_total;
float mu2 = body2.mass / m_total;
SetupBody(body1, a_scaled * mu2, mu2 * mu2 * body2.mass, false);
SetupBody(body2, a_scaled * mu1, mu1 * mu1 * body1.mass, true);
}
public static void SetupGravityEngine(GameObject centerBody, GameObject orbitingBody)
{
GravityEngine ge = GravityEngine.Instance();
if (ge == null)
{
Debug.LogError("No GE in scene");
}
if (ge.evolveAtStart)
{
Debug.LogError("Evolve at start set. Are you in the TestRunner scene?");
}
else if (ge.detectNbodies)
{
Debug.LogError("Detect NBodies at start set. Are you in the TestRunner scene?");
}
ge.UnitTestAwake();
ge.Clear();
ge.AddBody(centerBody);
if (orbitingBody != null)
{
ge.AddBody(orbitingBody);
}
ge.Setup();
ge.LogDump();
}
// Update is called once per frame
void Update()
{
if (Input.GetKeyUp(KeyCode.C))
{
OrbitData currentOrbit = new OrbitData();
currentOrbit.SetOrbitForVelocity(shipNbody, centerNbody);
// circularize the orbit
OrbitTransfer t = new CircularizeXfer(currentOrbit);
// If this is a ship with a Kepler sequence take the maneuvers and add them as KeplerSequence elements
// This allows the transfer to be time-reversible if the whole scene is on rails.
if (keplerSeq != null)
{
keplerSeq.AddManeuvers(t.GetManeuvers());
}
else
{
// Nbody evolution (or plain onRails w/o KeplerSequence) use maneuvers
GravityEngine.Instance().AddManeuver(t.GetManeuvers()[0]);
}
}
else if (Input.GetKeyDown(KeyCode.R))
{
// return orbit to GravityEngine control (go Off-Rails)
if (keplerSeq != null)
{
keplerSeq.AppendReturnToGE(GravityEngine.Instance().GetPhysicalTime(), shipNbody);
}
}
else if (Input.GetKeyDown(KeyCode.W))
{
// return orbit to GravityEngine control (go Off-Rails)
GravityEngine.Instance().ApplyImpulse(shipNbody, Vector3.up);
}
}