public static List <Curve> Curves()
{
GetObject go;
while (true)
{
go = new GetObject();
go.AcceptNothing(true);
go.AcceptEnterWhenDone(true);
go.SetCommandPrompt("请选择一条或多条曲线，之后回车或者右键确认");
go.GeometryFilter = ObjectType.Curve | ObjectType.EdgeFilter;
if (go.GetMultiple(1, 0) != GetResult.Object)
{
return(null);
}
List <Curve> ghCurveList1 = new List <Curve>();
Array.ForEach(go.Objects(), (ObjRef obj) => ghCurveList1.Add(obj.Curve()));
if (ghCurveList1.Count == 0)
{
return(null);
}
return(ghCurveList1);
}
}
public static List <Guid> Guids(ObjectType filter)
{
GetObject go;
while (true)
{
go = new GetObject();
go.AcceptNothing(true);
go.AcceptEnterWhenDone(true);
go.SetCommandPrompt("请选择一个或多个，之后回车确认");
go.GeometryFilter = filter;
if (go.GetMultiple(1, 0) != GetResult.Object)
{
return(null);
}
List <Guid> ghCurveList1 = new List <Guid>();
Array.ForEach(go.Objects(), (ObjRef obj) => ghCurveList1.Add(obj.ObjectId));
if (ghCurveList1.Count == 0)
{
return(null);
}
return(ghCurveList1);
}
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// select curves to loft
var gs = new GetObject();
gs.SetCommandPrompt("select curves to loft");
gs.GeometryFilter = ObjectType.Curve;
gs.DisablePreSelect();
gs.SubObjectSelect = false;
gs.GetMultiple(2, 0);
if (gs.CommandResult() != Result.Success)
{
return(gs.CommandResult());
}
var curves = gs.Objects().Select(obj => obj.Curve()).ToList();
var breps = Brep.CreateFromLoft(curves, Point3d.Unset, Point3d.Unset, LoftType.Tight, false);
foreach (var brep in breps)
{
doc.Objects.AddBrep(brep);
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
GetObject go = new GetObject();
go.SetCommandPrompt("Select surfaces, polysurfaces, or meshes");
go.GroupSelect = true;
go.SubObjectSelect = false;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
bool bHavePreselectedObjects = false;
for (; ;)
{
GetResult res = go.GetMultiple(1, 0);
if (res == GetResult.Option)
{
go.EnablePreSelect(false, true);
continue;
}
else if (res != GetResult.Object)
{
return(Result.Cancel);
}
if (go.ObjectsWerePreselected)
{
bHavePreselectedObjects = true;
go.EnablePreSelect(false, true);
continue;
}
break;
}
BoundingBox box = BoundingBox.Empty;
for (int i = 0; i < go.ObjectCount; i++)
{
RhinoObject rhinoObject = go.Object(i).Object();
if (null != rhinoObject)
{
box.Union(rhinoObject.Geometry.GetBoundingBox(true));
}
rhinoObject.Select(false);
}
if (box.IsValid)
{
RFContext.ClippingBox = new Box(box);
//RFContext.Clip = true;
return(Result.Success);
}
return(Result.Nothing);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var go = new GetObject();
go.SetCommandPrompt("Select polygon meshes to unweld");
go.GeometryFilter = ObjectType.Mesh;
go.GetMultiple(1, 0);
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
foreach (var obj_ref in go.Objects())
{
var old_mesh = obj_ref.Mesh();
if (null != old_mesh)
{
var new_mesh = UnweldMesh(old_mesh);
if (null != new_mesh && new_mesh.IsValid)
{
doc.Objects.Replace(go.Object(0), new_mesh);
}
}
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var go = new GetObject();
go.SetCommandPrompt("Select curves to extract min/max radius points");
go.GeometryFilter = ObjectType.Curve;
go.GetMultiple(1, 0);
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
for (var i = 0; i < go.ObjectCount; i++)
{
var curve = go.Object(i).Curve();
if (null != curve)
{
var points = new List <Point3d>();
if (GetMinMaxRadiusPoints(curve, points))
{
doc.Objects.AddPoints(points);
}
}
}
doc.Views.Redraw();
return(Result.Success);
}
/// <summary>
/// This function selects breps
/// </summary>
///
///
public static bool XSelectBreps(string message, out RhinoList <Brep> breps)
{
breps = new RhinoList <Brep>();
int i;
var gc = new GetObject();
gc.SetCommandPrompt("Select some Breps");
gc.EnablePreSelect(true, true);
gc.GeometryFilter = Rhino.DocObjects.ObjectType.Brep;
gc.GetMultiple(1, 0);
//we do our double check to make sure the user selected something
if (gc.CommandResult() != Result.Success)
{
return(false);
}
for (i = 0; i < gc.ObjectCount; i++)
{
var brep = gc.Object(i).Brep();
if (null != brep)
{
breps.Add(brep);
}
}
return(true);
}
public static List <GH_Point> PickPoint()
{
GetObject go;
while (true)
{
go = new GetObject();
go.AcceptNothing(true);
go.AcceptEnterWhenDone(true);
go.SetCommandPrompt("请选择一个或多个，之后回车确认");
go.GeometryFilter = ObjectType.Point;
if (go.GetMultiple(1, 0) != GetResult.Object)
{
return(null);
}
List <GH_Point> ghCurveList1 = new List <GH_Point>();
Array.ForEach(go.Objects(), (ObjRef obj) => ghCurveList1.Add(new GH_Point(obj.Point().Location)));
if (ghCurveList1.Count == 0)
{
return(null);
}
return(ghCurveList1);
}
}
public override NodeCollection EnterNodes(string prompt = "Enter nodes")
{
GetObject gO = new GetObject();
gO.SetCustomGeometryFilter(new GetObjectGeometryFilter(FilterHandles));
gO.GeometryFilter = ObjectType.Point;
gO.SetCommandPrompt(prompt);
if (gO.GetMultiple(1, 0) == GetResult.Cancel)
{
throw new OperationCanceledException("Operation cancelled by user");
}
var result = new NodeCollection();
foreach (ObjRef rObj in gO.Objects())
{
if (Host.Instance.Handles.Links.ContainsSecond(rObj.ObjectId))
{
Guid guid = Host.Instance.Handles.Links.GetFirst(rObj.ObjectId);
Node node = Core.Instance.ActiveDocument?.Model?.Nodes[guid];
if (node != null && node is Node)
{
result.Add(node);
}
}
}
return(result);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var go = new GetObject();
go.SetCommandPrompt("Select closed, planar curves for containment test");
go.GeometryFilter = ObjectType.Curve;
go.GeometryAttributeFilter = GeometryAttributeFilter.ClosedCurve;
go.GetMultiple(2, 2);
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
var plane = go.View().ActiveViewport.ConstructionPlane();
var tol = doc.ModelAbsoluteTolerance;
var crvs = new Curve[2];
for (var i = 0; i < 2; i++)
{
var rh_ref = go.Object(i);
var rh_obj = rh_ref.Object();
crvs[i] = rh_ref.Curve();
if (null == rh_obj || null == crvs[i])
{
return(Result.Failure);
}
if (!crvs[i].IsPlanar(tol))
{
RhinoApp.WriteLine("Curve is not planar");
rh_obj.Select(true);
doc.Views.Redraw();
return(Result.Failure);
}
}
var result = Curve.PlanarClosedCurveRelationship(crvs[0], crvs[1], plane, tol);
switch (result)
{
case RegionContainment.Disjoint:
RhinoApp.WriteLine("There is no common area between the two regions.");
break;
case RegionContainment.MutualIntersection:
RhinoApp.WriteLine("The two curves intersect. There is therefore no full containment relationship either way.");
break;
case RegionContainment.AInsideB:
RhinoApp.WriteLine("The region bounded by the first curve is inside of the second curve.");
break;
case RegionContainment.BInsideA:
RhinoApp.WriteLine("The region bounded by the second curve is inside of the second first.");
break;
}
return(Result.Success);
}
public GH_GetterResult LoadFromSelection(out PointCloud pc)
{
var go = new GetObject();
go.GeometryFilter = Rhino.DocObjects.ObjectType.Point | Rhino.DocObjects.ObjectType.PointSet;
if (go.GetMultiple(1, 0) == Rhino.Input.GetResult.Cancel)
{
pc = null;
return(GH_GetterResult.cancel);
}
pc = new PointCloud();
for (int i = 0; i < go.ObjectCount; i++)
{
var obj = go.Object(i);
var rhObj = obj.Object();
if (rhObj.ObjectType == ObjectType.Point)
{
var pt = obj.Point().Location;
var col = rhObj.Attributes.ObjectColor;
pc.Add(pt, col);
}
else if (rhObj.ObjectType == ObjectType.PointSet)
{
using (PointCloud cloud = obj.PointCloud())
{
foreach (var item in cloud.AsEnumerable())
{
pc.Add(item.Location, item.Normal, item.Color);
}
}
}
}
return(GH_GetterResult.success);
}
public override PanelElementCollection EnterPanelElements(string prompt = "Enter panel elements")
{
GetObject gO = new GetObject();
gO.SetCustomGeometryFilter(new GetObjectGeometryFilter(FilterHandles));
gO.GeometryFilter = ObjectType.Surface | ObjectType.Mesh;
gO.SetCommandPrompt(prompt);
if (gO.GetMultiple(1, 0) == GetResult.Cancel)
{
throw new OperationCanceledException("Operation cancelled by user");
}
foreach (ObjRef rObj in gO.Objects())
{
var result = new PanelElementCollection();
if (Host.Instance.Handles.Links.ContainsSecond(rObj.ObjectId))
{
Guid guid = Host.Instance.Handles.Links.GetFirst(rObj.ObjectId);
Element element = Core.Instance.ActiveDocument?.Model?.Elements[guid];
if (element != null && element is PanelElement)
{
result.Add((PanelElement)element);
}
}
return(result);
}
return(null);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var go = new GetObject();
//GetObject is more general, and allows you to select any type of object.
go.GeometryFilter = Rhino.DocObjects.ObjectType.Point;
//user can only select points
go.GetMultiple(1, 0);
if (go.CommandResult() ! = Result.Success)
{
return(go.CommandResult());
}
// if statement above is just a check to tell us what to do if the command is a success/failure
var points = new List <Point>(go.ObjectCount);
// now we have a list, we just have to save them. Let's use a different type of array using
// the System.Collections namespace. The size of the array will be the size of the ObjectCount list.
for (var i = 0; i < go.ObjectCount; i++)
{
var point = go.Object(i).Point();
if (null != point)
{
}
}
RhinoApp.WriteLine("The user selected {0} points successfully", points.Count.ToString());
return(Result.Success);
}
/// <summary>
/// This function selects points
/// </summary>
/// <param name="message"></param>
/// <param name="pointer"></param>
public static void XSelectPoints(string message, out Point3dList pointer)
{
// variables are:
// string message
// out Point3dList points - the out won't be recognized unless you have Rhino.Collections and the 'out parameters
// have to be filled in the function.
// don't need a doc because we won't write anything to the document table, only reading.
pointer = new Point3dList();
var go = new GetObject();
go.GeometryFilter = Rhino.DocObjects.ObjectType.Point;
go.SetCommandPrompt(message);
go.GetMultiple(1, 0);
if (go.CommandResult() != Result.Success)
{
return;
}
for (var i = 0; i < go.ObjectCount; i++)
{
var point = go.Object(i).Point();
if (null != point)
{
pointer.Add(point.Location);
}
}
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var go = new GetObject();
go.SetCommandPrompt("Select grips to move");
go.GeometryFilter = ObjectType.Grip;
go.GetMultiple(1, 0);
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
using (var object_list = new TransformObjectList())
{
object_list.AddObjects(go, true);
var dir = new Vector3d(5, 0, 0); // 5 units in world x-axis direction
var xform = Transform.Translation(dir);
foreach (var grip in object_list.GripArray())
{
grip.Move(xform);
}
foreach (var owner in object_list.GripOwnerArray())
{
doc.Objects.GripUpdate(owner, true);
}
doc.Views.Redraw();
}
return(Result.Success);
}
/// <summary>
/// This function selects some curves
/// </summary>
///
///
public static bool XSelectCurves(string message, out CurveList curves)
{
curves = new CurveList();
var gc = new GetObject();
gc.SetCommandPrompt(message);
gc.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
gc.GetMultiple(1, 0);
if (gc.CommandResult() != Result.Success)
{
return(false);
}
for (var i = 0; i < gc.ObjectCount; i++)
{
var curve = gc.Object(i).Curve();
if (null != curve)
{
curves.Add(curve);
}
}
return(true);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var go = new GetObject();
go.SetCommandPrompt("Select objects");
go.GroupSelect = true;
go.GetMultiple(1, 0);
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
for (var i = 0; i < go.ObjectCount; i++)
{
var obj_ref = go.Object(i);
var obj = obj_ref.Object();
if (null != obj)
{
var value = obj.Attributes.GetUserString(SampleCsUserStringData.Key);
if (!string.IsNullOrEmpty(value))
{
RhinoApp.WriteLine(string.Format("<{0}> {1}", SampleCsUserStringData.Key, value));
}
}
}
return(Result.Success);
}
protected override Result RunCommand(Rhino.RhinoDoc doc, RunMode mode)
{
const ObjectType geometryFilter = ObjectType.Mesh;
GetObject go = new GetObject();
go.SetCommandPrompt("Select meshes to compute contacts");
go.GeometryFilter = geometryFilter;
go.GroupSelect = true;
go.SubObjectSelect = false;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
GetResult res = go.GetMultiple(1, 0);
if (res != GetResult.Object)
{
return(Result.Cancel);
}
Rhino.RhinoApp.WriteLine(res.GetType().ToString())
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
using (var go = new GetObject())
{
go.SetCommandPrompt("Please select planer shade surfaces");
go.GeometryFilter = ObjectType.Surface | ObjectType.Brep;
go.GroupSelect = false;
go.SubObjectSelect = false;
go.GetMultiple(1, 0);
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
if (go.Objects().Count() == 0)
{
return(Result.Failure);
}
var SelectedObjs = go.Objects();
//prepare BrepObjects
var shades = SelectedObjs.ToList();
//add shades to model
ConvertToShades(doc, shades);
return(Result.Success);
}
}
public static Result MeshVolume(RhinoDoc doc)
{
var gm = new GetObject();
gm.SetCommandPrompt("Select solid meshes for volume calculation");
gm.GeometryFilter = ObjectType.Mesh;
gm.GeometryAttributeFilter = GeometryAttributeFilter.ClosedMesh;
gm.SubObjectSelect = false;
gm.GroupSelect = true;
gm.GetMultiple(1, 0);
if (gm.CommandResult() != Result.Success)
{
return(gm.CommandResult());
}
double volume = 0.0;
double volume_error = 0.0;
foreach (var obj_ref in gm.Objects())
{
if (obj_ref.Mesh() != null)
{
var mass_properties = VolumeMassProperties.Compute(obj_ref.Mesh());
if (mass_properties != null)
{
volume += mass_properties.Volume;
volume_error += mass_properties.VolumeError;
}
}
}
RhinoApp.WriteLine("Total volume = {0:f} (+/- {1:f})", volume, volume_error);
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var go = new GetObject();
go.SetCommandPrompt("Select 2, 3, or 4 open curves");
go.GeometryFilter = ObjectType.Curve;
go.GeometryAttributeFilter = GeometryAttributeFilter.OpenCurve;
go.GetMultiple(2, 4);
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
var curves = go.Objects().Select(o => o.Curve());
var brep = Brep.CreateEdgeSurface(curves);
if (brep != null)
{
doc.Objects.AddBrep(brep);
doc.Views.Redraw();
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
// TODO: start here modifying the behaviour of your command.
//Select objects
try
{
GetObject go = new GetObject();
go.EnablePreSelect(true, true);
go.EnablePostSelect(true);
go.SetCommandPrompt("Super Intersection | Advanced Boolean Intersection:");
go.GetMultiple(1, 0);
if (go.ObjectCount > 0)
{
RhinoApp.RunScript("_BooleanIntersection", true);
RhinoApp.RunScript("_SelLast", true);
RhinoApp.RunScript("_MergeAllFaces", true);
RhinoApp.RunScript("_ShrinkTrimmedSrf", true);
}
return(Result.Success);
}
catch
{
return(Result.Failure);
}
}
public override ElementCollection EnterElements(string prompt = "Enter elements")
{
GetObject gO = new GetObject();
gO.SetCustomGeometryFilter(new GetObjectGeometryFilter(FilterHandles));
//gO.GeometryFilter = ObjectType.Curve;
gO.SetCommandPrompt(prompt);
if (gO.GetMultiple(1, 0) == GetResult.Cancel)
{
throw new OperationCanceledException("Operation cancelled by user");
}
var result = new ElementCollection();
foreach (ObjRef rObj in gO.Objects())
{
if (Host.Instance.Handles.Links.ContainsSecond(rObj.ObjectId))
{
Guid guid = Host.Instance.Handles.Links.GetFirst(rObj.ObjectId);
ElementTable elementTable = Core.Instance.ActiveDocument?.Model?.Elements;
if (elementTable != null && elementTable.Contains(guid))
{
Element element = Core.Instance.ActiveDocument?.Model?.Elements[guid];
if (element != null)
{
result.Add(element);
}
}
}
}
return(result);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
GetObject go = new GetObject();
go.SetCommandPrompt("Select two curves for planar curve containment test");
go.GeometryFilter = ObjectType.Curve;
go.GeometryAttributeFilter = GeometryAttributeFilter.ClosedCurve;
go.SubObjectSelect = false;
go.GetMultiple(2, 2);
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
Rhino.Geometry.Curve curveA = go.Object(0).Curve();
Rhino.Geometry.Curve curveB = go.Object(1).Curve();
if (null == curveA || null == curveB)
{
return(Result.Failure);
}
Plane planeA, planeB;
if (!curveA.IsPlanar() || !curveA.TryGetPlane(out planeA))
{
RhinoApp.WriteLine("Curve A is not planar.");
return(Result.Success);
}
if (!curveB.IsPlanar() || !curveB.TryGetPlane(out planeB))
{
RhinoApp.WriteLine("Curve B is not planar.");
return(Result.Success);
}
double tol = Rhino.RhinoMath.ZeroTolerance;
RegionContainment rc = Curve.PlanarClosedCurveRelationship(curveA, curveB, planeA, tol);
switch (rc)
{
case RegionContainment.Disjoint:
RhinoApp.WriteLine("There is no common area between the two regions.");
break;
case RegionContainment.MutualIntersection:
RhinoApp.WriteLine("The two curves intersect. No full containment relationship exists.");
break;
case RegionContainment.AInsideB:
RhinoApp.WriteLine("Region bounded by curveA (first curve) is inside of curveB (second curve).");
break;
case RegionContainment.BInsideA:
RhinoApp.WriteLine("Region bounded by curveB (second curve) is inside of curveA (first curve).");
break;
}
return(Result.Success);
}
public static GetObject GetRhinoObjects(string prompt, ObjectType geometryFilter)
{
GetObject go = new GetObject();
go.SetCommandPrompt(prompt);
go.GeometryFilter = geometryFilter;
go.GroupSelect = false;
go.SubObjectSelect = false;
go.EnableClearObjectsOnEntry(false);
go.EnableUnselectObjectsOnExit(false);
go.DeselectAllBeforePostSelect = false;
bool bHavePreselectedObjects = true;
for (; ;)
{
GetResult res = go.GetMultiple(1, 0);
if (res == GetResult.Option)
{
go.EnablePreSelect(false, true);
continue;
}
else if (res != GetResult.Object)
{
return(go);
}
if (go.ObjectsWerePreselected)
{
bHavePreselectedObjects = true;
go.EnablePreSelect(false, true);
continue;
}
break;
}
if (bHavePreselectedObjects)
{
// Normally, pre-selected objects will remain selected, when a
// command finishes, and post-selected objects will be unselected.
// This this way of picking, it is possible to have a combination
// of pre-selected and post-selected. So, to make sure everything
// "looks the same", lets unselect everything before finishing
// the command.
for (int i = 0; i < go.ObjectCount; i++)
{
RhinoObject rhinoObject = go.Object(i).Object();
if (null != rhinoObject)
{
rhinoObject.Select(false);
}
}
}
return(go);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
RhinoApp.WriteLine("안녕하세요 방만드는기계 입니다.");
//
Polyline outline = new Polyline();
Polyline coreLine = new Polyline();
Polyline landing = new Polyline();
GetObject getPolyline = new GetObject();
getPolyline.SetCommandPrompt("외곽선,코어,랜딩 입력해주세요");
getPolyline.GeometryFilter = Rhino.DocObjects.ObjectType.Curve;
getPolyline.GeometryAttributeFilter = GeometryAttributeFilter.ClosedCurve;
getPolyline.SubObjectSelect = false;
getPolyline.GetMultiple(3, 0);
if (getPolyline.CommandResult() != Result.Success)
{
RhinoApp.WriteLine("달라고!");
return(getPolyline.CommandResult());
}
else
{
RhinoApp.WriteLine("입력받았습니다.");
}
if (null == getPolyline.Object(0).Curve())
{
RhinoApp.WriteLine("없잖아!");
return(getPolyline.CommandResult());
}
List <Polyline> testPoly = new List <Polyline>();
foreach (var i in getPolyline.Objects())
{
testPoly.Add(CurveTools.ToPolyline(i.Curve()));
}
outline = testPoly[0];
coreLine = testPoly[1];
landing = testPoly[2];
List <Polyline> rooms = Debugger.DebugRoom(outline, coreLine, landing);
foreach (Polyline i in rooms)
{
doc.Objects.AddCurve(i.ToNurbsCurve());
}
doc.Views.Redraw();
RhinoApp.WriteLine("최선을 다했습니다만...");
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
OptionDouble amountOption = new OptionDouble(amount, 0.001, 300);
OptionInteger triesOption = new OptionInteger(tries, 1, 1000);
GetObject go = new GetObject();
go.SetCommandPrompt("Select meshes to Randomize");
go.AddOptionDouble("Amount", ref amountOption);
go.AddOptionInteger("Tries", ref triesOption);
go.GeometryFilter = Rhino.DocObjects.ObjectType.Mesh;
for (;;)
{
GetResult res = go.GetMultiple(1, 0);
if (res == GetResult.Option)
{
tries = triesOption.CurrentValue;
amount = amountOption.CurrentValue;
continue;
}
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
break;
}
if (go.ObjectCount < 1)
{
return(Result.Failure);
}
foreach (var obj in go.Objects())
{
var rhinoMesh = obj.Mesh();
if (rhinoMesh == null || !rhinoMesh.IsValid)
{
continue;
}
var mesh = GopherUtil.ConvertToD3Mesh(obj.Mesh());
g3.DMesh3 outputMeshRandom;
GopherUtil.RandomizeMesh(mesh, out outputMeshRandom, amount, tries);
var rhinoOutputMeshRandom = GopherUtil.ConvertToRhinoMesh(outputMeshRandom);
doc.Objects.Replace(obj, rhinoOutputMeshRandom);
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
int i;
CurveList selectedcurves = new CurveList();
int divnr = 10;
Point3d[] divptarray;
//declares variable as a standard array in .NET, for use with the out overload below.
// step one, select curves --------------------------
var gc = new GetObject();
gc.SetCommandPrompt("Select curves to divide into 10 sections (start+end points added)");
gc.GeometryFilter = ObjectType.Curve;
gc.GetMultiple(1, 0);
if (gc.CommandResult() != Result.Success)
{
return(gc.CommandResult());
}
//enter the loop
for (i = 0; i < gc.ObjectCount; i++)
{
var curve = gc.Object(i).Curve();
if (null != curve && !curve.IsShort(RhinoMath.ZeroTolerance))
{
selectedcurves.Add(curve);
}
// ADD THE CURVE TO THE CURVES LIST, expanding dynamically through the loop
}
if (selectedcurves.Count < 1)
{
return(Result.Failure);
}
//step 2, divide curves ----------------------------------
for (i = 0; i < selectedcurves.Count; i++)
{
double[] parameters = selectedcurves[i].DivideByCount(divnr, true, out divptarray);
UsefulFunctions.XDrawPoints(divptarray, doc);
UsefulFunctions.XDrawCurveTangents(parameters, selectedcurves[i], doc);
}
return(Result.Success);
}
public Result AddApertureBySurface(RhinoDoc doc, IEnumerable <ObjRef> rooms)
{
//Select window geometry.
using (var go2 = new GetObject())
{
go2.SetCommandPrompt("Please select planer window surfaces");
go2.GeometryFilter = ObjectType.Surface;
go2.GroupSelect = false;
go2.DisablePreSelect();
go2.EnableSelPrevious(false);
go2.SubObjectSelect = false;
go2.GetMultiple(1, 0);
if (go2.CommandResult() != Result.Success)
{
return(go2.CommandResult());
}
if (go2.Objects().Count() == 0)
{
return(Result.Failure);
}
var SelectedObjs = go2.Objects();
//prepare BrepObjects
var WinObjs = SelectedObjs.ToList();
//var room = rooms.First();
//var roomBrep = room.Brep();
//match window to room
var matchedRoomDoors = rooms.AddDoors(WinObjs);
foreach (var match in matchedRoomDoors)
{
var doors = match.doors;
if (!doors.Any())
{
continue;
}
foreach (var door in doors)
{
doc.Objects.Replace(door.id, door.brep);
}
//Replace the rhino object in order to be able to undo/redo
doc.Objects.Replace(match.roomId, match.room);
RhinoApp.WriteLine($"{doors.Count} windows have been successfully added to room {match.roomId}");
}
return(Result.Success);
}
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var go = new GetObject();
go.SetCommandPrompt("Select holes");
go.GeometryFilter = ObjectType.BrepLoop;
go.GeometryAttributeFilter = GeometryAttributeFilter.InnerLoop;
go.GetMultiple(1, 0);
if (go.CommandResult() == Result.Success)
{
for (var i = 0; i < go.ObjectCount; i++)
{
var obj_ref = go.Object(i);
var ci = obj_ref.GeometryComponentIndex;
if (ci.ComponentIndexType != ComponentIndexType.BrepLoop)
{
return(Result.Failure);
}
var brep = obj_ref.Brep();
if (null == brep)
{
return(Result.Failure);
}
var loop = brep.Loops[ci.Index];
if (null == loop)
{
return(Result.Failure);
}
for (var lti = 0; lti < loop.Trims.Count; lti++)
{
var ti = loop.Trims[lti].TrimIndex;
var trim = brep.Trims[ti];
if (null != trim)
{
var edge = brep.Edges[trim.Edge.EdgeIndex];
if (null != edge)
{
// TODO: do somethign with edge curve.
// In this case, we'll just add a copy to the document.
var curve = edge.DuplicateCurve();
if (null != curve)
{
doc.Objects.AddCurve(curve);
}
}
}
}
}
}
doc.Views.Redraw();
return(Result.Success);
}
