/// <summary> /// Executes the command. /// Moves the joint according to a given scale factor and pivot point. /// </summary> /// <param name="services">CommandServices object to interact with the system</param> public override void Run(Canguro.Controller.CommandServices services) { List<Canguro.Model.Joint> selection = new List<Canguro.Model.Joint>(); List<Item> selectedItems = services.GetSelection(); if (selectedItems.Count == 0) return; foreach (Item item in selectedItems) { if (item is Joint) selection.Add((Joint)item); else if (item is LineElement) { LineElement l = (LineElement)item; if (!selection.Contains(l.I)) selection.Add(l.I); if (!selection.Contains(l.J)) selection.Add(l.J); } } Microsoft.DirectX.Vector3 piv; float scale = services.GetSingle(Culture.Get("getScale")); Controller.Snap.Magnet m = services.GetPoint(Culture.Get("pivotScalePoint")); if (m == null) return; piv = m.SnapPosition; foreach (Canguro.Model.Joint j in selection) { j.X = (j.X - piv.X) * scale + piv.X; j.Y = (j.Y - piv.Y) * scale + piv.Y; j.Z = (j.Z - piv.Z) * scale + piv.Z; } }
/// <summary> /// Executes the command. /// Deletes all the selected items except joints connected to undeleted elements. /// </summary> /// <param name="services">CommandServices object to interact with the system</param> public override void Run(Canguro.Controller.CommandServices services) { List<Item> selection = services.GetSelection(); ItemList<Joint> jList = Canguro.Model.Model.Instance.JointList; ItemList<LineElement> lList = Canguro.Model.Model.Instance.LineList; ItemList<AreaElement> aList = Canguro.Model.Model.Instance.AreaList; bool[] hasElement = new bool[jList.Count]; int size; size = lList.Count; for (int i=1; i<size; i++) { LineElement obj = lList[i]; if (obj != null) { if (obj.IsSelected) lList.Remove(obj); else { hasElement[obj.I.Id] = true; hasElement[obj.J.Id] = true; } } } size = aList.Count; for (int i = 1; i < size; i++) { AreaElement obj = aList[i]; if (obj != null) { if (obj.IsSelected) aList.Remove(obj); else { hasElement[obj.J1.Id] = true; hasElement[obj.J2.Id] = true; hasElement[obj.J3.Id] = true; hasElement[obj.J4.Id] = true; } } } size = jList.Count; for (int i = 1; i < size; i++) { Joint obj = jList[i]; if (i == 500) i = 500; if (obj != null && obj.IsSelected && !hasElement[obj.Id]) jList.Remove(obj); } }
//public override void Run(Canguro.Controller.CommandServices services) //{ // List<Item> selection = GetSelection(services); // if (selection.Count == 0) // return; // Stream stream = new MemoryStream(); // try // { // BinaryFormatter bformatter = new BinaryFormatter(); // Magnet magnet = services.GetPoint("selectPivot"); // bformatter.Serialize(stream, magnet.SnapPosition); // bformatter.Serialize(stream, selection.Count); // foreach (Item item in selection) // { // bformatter.Serialize(stream, item); // item.IsSelected = true; // } // Clipboard.SetData("Canguro", stream); // } // finally // { // stream.Close(); // } //} /// <summary> /// Executes the command. /// Gets the selection and a pivot point, and adds them to the Clipboard with the key "Canguro" /// </summary> /// <param name="services">CommandServices object to interact with the system</param> public override void Run(Canguro.Controller.CommandServices services) { Dictionary<uint, Joint> joints = new Dictionary<uint, Joint>(); List<LineElement> lines = new List<LineElement>(); List<AreaElement> areas = new List<AreaElement>(); bool haveSelection = false; haveSelection = services.GetSelection(joints, lines, areas); if (!haveSelection) { services.GetMany(Culture.Get("selectItems")); haveSelection = services.GetSelection(joints, lines, areas); } if (haveSelection) { Magnet magnet = services.GetPoint(Culture.Get("selectPivot")); if (magnet != null) { Microsoft.DirectX.Vector3 pivot = magnet.SnapPosition; Clipboard.Clear(); object[] objs = new object[] { joints, lines, areas, pivot }; //// Test Serialization //System.IO.MemoryStream s = new MemoryStream(); //new System.Runtime.Serialization.Formatters.Binary.BinaryFormatter().Serialize(s, objs); Clipboard.SetData("Canguro", objs); } } foreach (Item item in joints.Values) if (item != null) item.IsSelected = true; foreach (Item item in lines) if (item != null) item.IsSelected = true; foreach (Item item in areas) if (item != null) item.IsSelected = true; }
/// <summary> /// Executes the command. /// Flips the joints in all selected AreaElements /// </summary> /// <param name="services">CommandServices object to interact with the system</param> public override void Run(Canguro.Controller.CommandServices services) { Canguro.Model.AreaElement area; List<Canguro.Model.Item> selection = services.GetSelection(); foreach (Canguro.Model.Item item in selection) { if ((area = item as Canguro.Model.AreaElement) != null) area.FlipJoints++; } //// Para que se refleje el cambio services.Model.ChangeModel(); }
public override void Run(Canguro.Controller.CommandServices services) { List<Item> selecton = services.GetSelection(); List<Joint> joints = new List<Joint>(); List<LineElement> lines = new List<LineElement>(); foreach (Item item in selecton) { if (item is Joint) joints.Add((Joint)item); else if (item is LineElement) lines.Add((LineElement)item); } JoinCmd.Intersect(services.Model, joints, lines); }
/// <summary> /// Executes the command. /// Creates, gets parameters and add a Distributed line load to the selected line elements. /// </summary> /// <param name="services">CommandServices object to interact with the system</param> public override void Run(Canguro.Controller.CommandServices services) { TemperatureGradientLineLoad load = new TemperatureGradientLineLoad(); if (Canguro.Controller.Grid.LoadEditFrm.EditLoad(load) == System.Windows.Forms.DialogResult.OK) { List<Item> selection = services.GetSelection(); foreach (Item item in selection) { if (item is LineElement) ((LineElement)item).Loads.Add((TemperatureGradientLineLoad)load.Clone()); } } }
public override void Run(Canguro.Controller.CommandServices services) { GroundDisplacementLoad load = new GroundDisplacementLoad(); //services.GetProperties(Title, load, false); if (Canguro.Controller.Grid.LoadEditFrm.EditLoad(load) == System.Windows.Forms.DialogResult.OK) { List<Item> selection = services.GetSelection(); foreach (Item item in selection) { if (item is Joint) ((Joint)item).Loads.Add((GroundDisplacementLoad)load.Clone()); } } }
/// <summary> /// Executes the command. /// Creates, gets parameters and add a Distributed line load to the selected line elements. /// </summary> /// <param name="services">CommandServices object to interact with the system</param> public override void Run(Canguro.Controller.CommandServices services) { if (Canguro.Controller.Grid.LoadEditFrm.EditLoad(this) == System.Windows.Forms.DialogResult.OK) { DistributedSpanLoad newLoad = new DistributedSpanLoad(); newLoad.Da = 0; newLoad.Db = 1; newLoad.Direction = direction; newLoad.La = load; newLoad.Lb = load; newLoad.Type = type; List<Item> selection = services.GetSelection(); foreach (Item item in selection) { if (item is LineElement) ((LineElement)item).Loads.Add((DistributedSpanLoad)newLoad.Clone()); } } }
/// <summary> /// Executes the command. /// Gets a number of segments and divides all selected line elements in equal length segments. /// </summary> /// <param name="services">CommandServices object to interact with the system</param> public override void Run(Canguro.Controller.CommandServices services) { List<Item> selection = services.GetSelection(); if (selection.Count == 0) return; List<LineElement> lineList = new List<LineElement>(); foreach (Item item in selection) if (item != null && item is LineElement) lineList.Add((LineElement)item); if (lineList.Count == 0) lineList.Add(services.GetLine()); int parts = (int)services.GetSingle(Culture.Get("getSplitParts") + " [2-100]"); parts = (parts < 2) ? 2 : (parts > 100) ? 100 : parts; foreach (LineElement line in lineList) { Joint ji = line.I; Joint jj = line.J; Joint last = jj; Microsoft.DirectX.Vector3 v = new Microsoft.DirectX.Vector3(jj.X - ji.X, jj.Y - ji.Y, jj.Z - ji.Z); v.Multiply(1.0f / parts); if (parts > 1 && v.LengthSq() > 0) { LineElement newLine = line; for (int i = 0; i < parts - 1; i++) { jj = new Joint(ji.X + v.X, ji.Y + v.Y, ji.Z + v.Z); services.Model.JointList.Add(jj); newLine = Split(newLine, jj, services.Model); services.Model.LineList.Add(newLine); ji = jj; } } } }
/// <summary> /// Executes the command. /// Moves the selected Item's Joints around a given point and with a given angle. /// </summary> /// <param name="services">CommandServices object to interact with the system</param> public override void Run(Canguro.Controller.CommandServices services) { Dictionary<Joint, Joint> joints = new Dictionary<Joint, Joint>(); ItemList<Joint> jList = services.Model.JointList; ItemList<LineElement> lList = services.Model.LineList; List<Item> selection = services.GetSelection(); if (selection.Count == 0) return; foreach (Item item in selection) { if (item is Joint) joints.Add((Joint)item, null); else if (item is LineElement) { LineElement l = (LineElement)item; if (!joints.ContainsKey(l.I)) joints.Add(l.I, null); if (!joints.ContainsKey(l.J)) joints.Add(l.J, null); } } Microsoft.DirectX.Vector3 v, v2; float angle = float.Parse(services.GetString(Culture.Get("getRotationAngle"))); angle *= (float)Math.PI / 180.0F; Controller.Snap.Magnet m = services.GetPoint(Culture.Get("getRotationCenter")); if (m == null) return; v = m.SnapPosition; services.TrackingService = LineTrackingService.Instance; services.TrackingService.SetPoint(m.SnapPositionInt); m = services.GetPoint(Culture.Get("getPolarRotationCenter")); if (m == null) return; v2 = m.SnapPosition; if (v2.Equals(v)) { Canguro.View.GraphicView view = Canguro.View.GraphicViewManager.Instance.ActiveView; Vector3 v1Tmp = new Vector3(0, 0, 0); Vector3 v2Tmp = new Vector3(0, 0, 1); view.Unproject(ref v1Tmp); view.Unproject(ref v2Tmp); v2 = v2 + v1Tmp - v2Tmp; } services.TrackingService = null; Matrix trans1 = new Matrix(); trans1.Translate(-v); Matrix rot = new Matrix(); rot.RotateAxis(v2 - v, angle); Matrix trans2 = new Matrix(); trans2.Translate(v); rot = trans1 * rot * trans2; foreach (Joint j in joints.Keys) { Vector3 pos = new Vector3(j.X, j.Y, j.Z); pos.TransformCoordinate(rot); j.X = pos.X; j.Y = pos.Y; j.Z = pos.Z; } }
/// <summary> /// Executes the command. /// Asks for selected Items repetitions and a Vector, and makes the copies. /// </summary> /// <param name="services">CommandServices object to interact with the system</param> public override void Run(Canguro.Controller.CommandServices services) { Dictionary<Joint, Joint> joints = new Dictionary<Joint, Joint>(); Dictionary<Joint, Joint> jSelection = new Dictionary<Joint, Joint>(); List<LineElement> lines = new List<LineElement>(); List<LineElement> lSelection = new List<LineElement>(); List<AreaElement> areas = new List<AreaElement>(); List<AreaElement> aSelection = new List<AreaElement>(); ItemList<Joint> jList = services.Model.JointList; ItemList<LineElement> lList = services.Model.LineList; ItemList<AreaElement> aList = services.Model.AreaList; Joint nJoint; LineElement nLine; AreaElement nArea; List<Item> selection = services.GetSelection(); if (selection.Count == 0) return; foreach (Item item in selection) { if (item is Joint) { jSelection.Add((Joint)item, null); joints.Add((Joint)item, null); } else if (item is LineElement) { LineElement l = (LineElement)item; lSelection.Add(l); lines.Add(l); if (!jSelection.ContainsKey(l.I)) { jSelection.Add(l.I, null); joints.Add(l.I, null); } if (!jSelection.ContainsKey(l.J)) { jSelection.Add(l.J, null); joints.Add(l.J, null); } } else if (item is AreaElement) { AreaElement a = (AreaElement)item; aSelection.Add(a); areas.Add(a); for (int i = 0; i < ((a.J4 != null) ? 4 : 3); i++) { if (!jSelection.ContainsKey(a[i])) { jSelection.Add(a[i], null); joints.Add(a[i], null); } } } } Microsoft.DirectX.Vector3 v; services.GetVector(out v); uint n; string str = services.GetString(Culture.Get("getArrayRepetition")); n = Convert.ToUInt32(str); List<Joint> newJoints = new List<Joint>(); List<LineElement> newLines = new List<LineElement>(); List<AreaElement> newAreas = new List<AreaElement>(); for (int i = 1; i <= n; i++) { foreach (Joint j in joints.Keys) { jList.Add(nJoint = new Joint(j.X + i * v.X, j.Y + i * v.Y, j.Z + i * v.Z)); nJoint.Masses = j.Masses; nJoint.DoF = j.DoF; jSelection[j] = nJoint; newJoints.Add(nJoint); } foreach (LineElement l in lines) { lList.Add(nLine = new LineElement(l, jSelection[l.I], jSelection[l.J])); newLines.Add(nLine); } foreach (AreaElement a in areas) { aList.Add(nArea = new AreaElement(a, jSelection[a.J1], jSelection[a.J2], jSelection[a.J3], jSelection[a.J4])); newAreas.Add(nArea); } services.ReportProgress((uint)(100 * i / n)); System.Windows.Forms.Application.DoEvents(); } JoinCmd.Join(services.Model, newJoints, newLines, newAreas); }
/// <summary> /// Executes the command. /// Copies the selected Items in a series around a given rotation axis. /// </summary> /// <param name="services">CommandServices object to interact with the system</param> public override void Run(Canguro.Controller.CommandServices services) { Dictionary<Joint, Joint> joints = new Dictionary<Joint, Joint>(); Dictionary<Joint, Joint> jSelection = new Dictionary<Joint, Joint>(); List<LineElement> lines = new List<LineElement>(); List<LineElement> lSelection = new List<LineElement>(); List<AreaElement> areas = new List<AreaElement>(); List<AreaElement> aSelection = new List<AreaElement>(); ItemList<Joint> jList = services.Model.JointList; ItemList<LineElement> lList = services.Model.LineList; ItemList<AreaElement> aList = services.Model.AreaList; Joint nJoint; LineElement nLine; AreaElement nArea; List<Item> selection = services.GetSelection(); if (selection.Count == 0) return; foreach (Item item in selection) { if (item is Joint) { jSelection.Add((Joint)item, null); joints.Add((Joint)item, null); } else if (item is LineElement) { LineElement l = (LineElement)item; lSelection.Add(l); lines.Add(l); if (!jSelection.ContainsKey(l.I)) { jSelection.Add(l.I, null); joints.Add(l.I, null); } if (!jSelection.ContainsKey(l.J)) { jSelection.Add(l.J, null); joints.Add(l.J, null); } } else if (item is AreaElement) { AreaElement a = (AreaElement)item; aSelection.Add(a); areas.Add(a); if (!jSelection.ContainsKey(a.J1)) { jSelection.Add(a.J1, null); joints.Add(a.J1, null); } if (!jSelection.ContainsKey(a.J2)) { jSelection.Add(a.J2, null); joints.Add(a.J2, null); } if (!jSelection.ContainsKey(a.J3)) { jSelection.Add(a.J3, null); joints.Add(a.J3, null); } if (a.J4 != null && !jSelection.ContainsKey(a.J4)) { jSelection.Add(a.J4, null); joints.Add(a.J4, null); } } } Microsoft.DirectX.Vector3 v, v2; uint n = (uint)services.GetSingle(Culture.Get("getArrayRepetition")); float dAngle = float.Parse(services.GetString(Culture.Get("getPolarArrayAngle"))); dAngle *= (float)Math.PI / 180.0F; float angle = 0.0F; Controller.Snap.Magnet m = services.GetPoint(Culture.Get("getPolarRotationCenter")); if (m == null) return; v = m.SnapPosition; services.TrackingService = LineTrackingService.Instance; services.TrackingService.SetPoint(m.SnapPositionInt); m = services.GetPoint(Culture.Get("getPolarRotationCenter")); if (m == null) return; v2 = m.SnapPosition; if (v2.Equals(v)) { Canguro.View.GraphicView view = Canguro.View.GraphicViewManager.Instance.ActiveView; Vector3 v1Tmp = new Vector3(0, 0, 0); Vector3 v2Tmp = new Vector3(0, 0, 1); view.Unproject(ref v1Tmp); view.Unproject(ref v2Tmp); v2 = v2 + v1Tmp - v2Tmp; } services.TrackingService = null; List<Joint> newJoints = new List<Joint>(); List<LineElement> newLines = new List<LineElement>(); List<AreaElement> newAreas = new List<AreaElement>(); for (int i = 1; i <= n; i++) { angle += dAngle; Matrix trans1 = new Matrix(); trans1.Translate(-v); Matrix rot = new Matrix(); rot.RotateAxis(v2 - v, angle); Matrix trans2 = new Matrix(); trans2.Translate(v); rot = trans1 * rot * trans2; foreach (Joint j in joints.Keys) { Vector3 pos = new Vector3(j.X, j.Y, j.Z); pos.TransformCoordinate(rot); jList.Add(nJoint = new Joint(pos.X, pos.Y, pos.Z)); nJoint.Masses = j.Masses; nJoint.DoF = j.DoF; jSelection[j] = nJoint; newJoints.Add(nJoint); } foreach (LineElement l in lines) { lList.Add(nLine = new LineElement(l, jSelection[l.I], jSelection[l.J])); newLines.Add(nLine); } foreach (AreaElement a in areas) { aList.Add(nArea = new AreaElement(a, jSelection[a.J1], jSelection[a.J2], jSelection[a.J3], (a.J4 != null) ? jSelection[a.J4] : null)); newAreas.Add(nArea); } } JoinCmd.Join(services.Model, newJoints, newLines, newAreas); }