/// <summary>
/// Executes the command.
/// Moves the joint according to a given scale factor and pivot point.
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
List<Canguro.Model.Joint> selection = new List<Canguro.Model.Joint>();
List<Item> selectedItems = services.GetSelection();
if (selectedItems.Count == 0)
return;
foreach (Item item in selectedItems)
{
if (item is Joint)
selection.Add((Joint)item);
else if (item is LineElement)
{
LineElement l = (LineElement)item;
if (!selection.Contains(l.I))
selection.Add(l.I);
if (!selection.Contains(l.J))
selection.Add(l.J);
}
}
Microsoft.DirectX.Vector3 piv;
float scale = services.GetSingle(Culture.Get("getScale"));
Controller.Snap.Magnet m = services.GetPoint(Culture.Get("pivotScalePoint"));
if (m == null) return;
piv = m.SnapPosition;
foreach (Canguro.Model.Joint j in selection)
{
j.X = (j.X - piv.X) * scale + piv.X;
j.Y = (j.Y - piv.Y) * scale + piv.Y;
j.Z = (j.Z - piv.Z) * scale + piv.Z;
}
}
/// <summary>
/// Executes the command.
/// Deletes all the selected items except joints connected to undeleted elements.
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
List<Item> selection = services.GetSelection();
ItemList<Joint> jList = Canguro.Model.Model.Instance.JointList;
ItemList<LineElement> lList = Canguro.Model.Model.Instance.LineList;
ItemList<AreaElement> aList = Canguro.Model.Model.Instance.AreaList;
bool[] hasElement = new bool[jList.Count];
int size;
size = lList.Count;
for (int i=1; i<size; i++)
{
LineElement obj = lList[i];
if (obj != null)
{
if (obj.IsSelected)
lList.Remove(obj);
else
{
hasElement[obj.I.Id] = true;
hasElement[obj.J.Id] = true;
}
}
}
size = aList.Count;
for (int i = 1; i < size; i++)
{
AreaElement obj = aList[i];
if (obj != null)
{
if (obj.IsSelected)
aList.Remove(obj);
else
{
hasElement[obj.J1.Id] = true;
hasElement[obj.J2.Id] = true;
hasElement[obj.J3.Id] = true;
hasElement[obj.J4.Id] = true;
}
}
}
size = jList.Count;
for (int i = 1; i < size; i++)
{
Joint obj = jList[i];
if (i == 500)
i = 500;
if (obj != null && obj.IsSelected && !hasElement[obj.Id])
jList.Remove(obj);
}
}
//public override void Run(Canguro.Controller.CommandServices services)
//{
// List<Item> selection = GetSelection(services);
// if (selection.Count == 0)
// return;
// Stream stream = new MemoryStream();
// try
// {
// BinaryFormatter bformatter = new BinaryFormatter();
// Magnet magnet = services.GetPoint("selectPivot");
// bformatter.Serialize(stream, magnet.SnapPosition);
// bformatter.Serialize(stream, selection.Count);
// foreach (Item item in selection)
// {
// bformatter.Serialize(stream, item);
// item.IsSelected = true;
// }
// Clipboard.SetData("Canguro", stream);
// }
// finally
// {
// stream.Close();
// }
//}
/// <summary>
/// Executes the command.
/// Gets the selection and a pivot point, and adds them to the Clipboard with the key "Canguro"
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
Dictionary<uint, Joint> joints = new Dictionary<uint, Joint>();
List<LineElement> lines = new List<LineElement>();
List<AreaElement> areas = new List<AreaElement>();
bool haveSelection = false;
haveSelection = services.GetSelection(joints, lines, areas);
if (!haveSelection)
{
services.GetMany(Culture.Get("selectItems"));
haveSelection = services.GetSelection(joints, lines, areas);
}
if (haveSelection)
{
Magnet magnet = services.GetPoint(Culture.Get("selectPivot"));
if (magnet != null)
{
Microsoft.DirectX.Vector3 pivot = magnet.SnapPosition;
Clipboard.Clear();
object[] objs = new object[] { joints, lines, areas, pivot };
//// Test Serialization
//System.IO.MemoryStream s = new MemoryStream();
//new System.Runtime.Serialization.Formatters.Binary.BinaryFormatter().Serialize(s, objs);
Clipboard.SetData("Canguro", objs);
}
}
foreach (Item item in joints.Values)
if (item != null)
item.IsSelected = true;
foreach (Item item in lines)
if (item != null)
item.IsSelected = true;
foreach (Item item in areas)
if (item != null)
item.IsSelected = true;
}
/// <summary>
/// Executes the command.
/// Flips the joints in all selected AreaElements
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
Canguro.Model.AreaElement area;
List<Canguro.Model.Item> selection = services.GetSelection();
foreach (Canguro.Model.Item item in selection)
{
if ((area = item as Canguro.Model.AreaElement) != null)
area.FlipJoints++;
}
//// Para que se refleje el cambio
services.Model.ChangeModel();
}
public override void Run(Canguro.Controller.CommandServices services)
{
List<Item> selecton = services.GetSelection();
List<Joint> joints = new List<Joint>();
List<LineElement> lines = new List<LineElement>();
foreach (Item item in selecton)
{
if (item is Joint)
joints.Add((Joint)item);
else if (item is LineElement)
lines.Add((LineElement)item);
}
JoinCmd.Intersect(services.Model, joints, lines);
}
/// <summary>
/// Executes the command.
/// Creates, gets parameters and add a Distributed line load to the selected line elements.
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
TemperatureGradientLineLoad load = new TemperatureGradientLineLoad();
if (Canguro.Controller.Grid.LoadEditFrm.EditLoad(load) == System.Windows.Forms.DialogResult.OK)
{
List<Item> selection = services.GetSelection();
foreach (Item item in selection)
{
if (item is LineElement)
((LineElement)item).Loads.Add((TemperatureGradientLineLoad)load.Clone());
}
}
}
public override void Run(Canguro.Controller.CommandServices services)
{
GroundDisplacementLoad load = new GroundDisplacementLoad();
//services.GetProperties(Title, load, false);
if (Canguro.Controller.Grid.LoadEditFrm.EditLoad(load) == System.Windows.Forms.DialogResult.OK)
{
List<Item> selection = services.GetSelection();
foreach (Item item in selection)
{
if (item is Joint)
((Joint)item).Loads.Add((GroundDisplacementLoad)load.Clone());
}
}
}
/// <summary>
/// Executes the command.
/// Creates, gets parameters and add a Distributed line load to the selected line elements.
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
if (Canguro.Controller.Grid.LoadEditFrm.EditLoad(this) == System.Windows.Forms.DialogResult.OK)
{
DistributedSpanLoad newLoad = new DistributedSpanLoad();
newLoad.Da = 0;
newLoad.Db = 1;
newLoad.Direction = direction;
newLoad.La = load;
newLoad.Lb = load;
newLoad.Type = type;
List<Item> selection = services.GetSelection();
foreach (Item item in selection)
{
if (item is LineElement)
((LineElement)item).Loads.Add((DistributedSpanLoad)newLoad.Clone());
}
}
}
/// <summary>
/// Executes the command.
/// Gets a number of segments and divides all selected line elements in equal length segments.
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
List<Item> selection = services.GetSelection();
if (selection.Count == 0)
return;
List<LineElement> lineList = new List<LineElement>();
foreach (Item item in selection)
if (item != null && item is LineElement)
lineList.Add((LineElement)item);
if (lineList.Count == 0)
lineList.Add(services.GetLine());
int parts = (int)services.GetSingle(Culture.Get("getSplitParts") + " [2-100]");
parts = (parts < 2) ? 2 : (parts > 100) ? 100 : parts;
foreach (LineElement line in lineList)
{
Joint ji = line.I;
Joint jj = line.J;
Joint last = jj;
Microsoft.DirectX.Vector3 v = new Microsoft.DirectX.Vector3(jj.X - ji.X, jj.Y - ji.Y, jj.Z - ji.Z);
v.Multiply(1.0f / parts);
if (parts > 1 && v.LengthSq() > 0)
{
LineElement newLine = line;
for (int i = 0; i < parts - 1; i++)
{
jj = new Joint(ji.X + v.X, ji.Y + v.Y, ji.Z + v.Z);
services.Model.JointList.Add(jj);
newLine = Split(newLine, jj, services.Model);
services.Model.LineList.Add(newLine);
ji = jj;
}
}
}
}
/// <summary>
/// Executes the command.
/// Moves the selected Item's Joints around a given point and with a given angle.
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
Dictionary<Joint, Joint> joints = new Dictionary<Joint, Joint>();
ItemList<Joint> jList = services.Model.JointList;
ItemList<LineElement> lList = services.Model.LineList;
List<Item> selection = services.GetSelection();
if (selection.Count == 0)
return;
foreach (Item item in selection)
{
if (item is Joint)
joints.Add((Joint)item, null);
else if (item is LineElement)
{
LineElement l = (LineElement)item;
if (!joints.ContainsKey(l.I))
joints.Add(l.I, null);
if (!joints.ContainsKey(l.J))
joints.Add(l.J, null);
}
}
Microsoft.DirectX.Vector3 v, v2;
float angle = float.Parse(services.GetString(Culture.Get("getRotationAngle")));
angle *= (float)Math.PI / 180.0F;
Controller.Snap.Magnet m = services.GetPoint(Culture.Get("getRotationCenter"));
if (m == null) return;
v = m.SnapPosition;
services.TrackingService = LineTrackingService.Instance;
services.TrackingService.SetPoint(m.SnapPositionInt);
m = services.GetPoint(Culture.Get("getPolarRotationCenter"));
if (m == null) return;
v2 = m.SnapPosition;
if (v2.Equals(v))
{
Canguro.View.GraphicView view = Canguro.View.GraphicViewManager.Instance.ActiveView;
Vector3 v1Tmp = new Vector3(0, 0, 0);
Vector3 v2Tmp = new Vector3(0, 0, 1);
view.Unproject(ref v1Tmp);
view.Unproject(ref v2Tmp);
v2 = v2 + v1Tmp - v2Tmp;
}
services.TrackingService = null;
Matrix trans1 = new Matrix();
trans1.Translate(-v);
Matrix rot = new Matrix();
rot.RotateAxis(v2 - v, angle);
Matrix trans2 = new Matrix();
trans2.Translate(v);
rot = trans1 * rot * trans2;
foreach (Joint j in joints.Keys)
{
Vector3 pos = new Vector3(j.X, j.Y, j.Z);
pos.TransformCoordinate(rot);
j.X = pos.X;
j.Y = pos.Y;
j.Z = pos.Z;
}
}
/// <summary>
/// Executes the command.
/// Asks for selected Items repetitions and a Vector, and makes the copies.
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
Dictionary<Joint, Joint> joints = new Dictionary<Joint, Joint>();
Dictionary<Joint, Joint> jSelection = new Dictionary<Joint, Joint>();
List<LineElement> lines = new List<LineElement>();
List<LineElement> lSelection = new List<LineElement>();
List<AreaElement> areas = new List<AreaElement>();
List<AreaElement> aSelection = new List<AreaElement>();
ItemList<Joint> jList = services.Model.JointList;
ItemList<LineElement> lList = services.Model.LineList;
ItemList<AreaElement> aList = services.Model.AreaList;
Joint nJoint;
LineElement nLine;
AreaElement nArea;
List<Item> selection = services.GetSelection();
if (selection.Count == 0)
return;
foreach (Item item in selection)
{
if (item is Joint)
{
jSelection.Add((Joint)item, null);
joints.Add((Joint)item, null);
}
else if (item is LineElement)
{
LineElement l = (LineElement)item;
lSelection.Add(l);
lines.Add(l);
if (!jSelection.ContainsKey(l.I))
{
jSelection.Add(l.I, null);
joints.Add(l.I, null);
}
if (!jSelection.ContainsKey(l.J))
{
jSelection.Add(l.J, null);
joints.Add(l.J, null);
}
}
else if (item is AreaElement)
{
AreaElement a = (AreaElement)item;
aSelection.Add(a);
areas.Add(a);
for (int i = 0; i < ((a.J4 != null) ? 4 : 3); i++)
{
if (!jSelection.ContainsKey(a[i]))
{
jSelection.Add(a[i], null);
joints.Add(a[i], null);
}
}
}
}
Microsoft.DirectX.Vector3 v;
services.GetVector(out v);
uint n;
string str = services.GetString(Culture.Get("getArrayRepetition"));
n = Convert.ToUInt32(str);
List<Joint> newJoints = new List<Joint>();
List<LineElement> newLines = new List<LineElement>();
List<AreaElement> newAreas = new List<AreaElement>();
for (int i = 1; i <= n; i++)
{
foreach (Joint j in joints.Keys)
{
jList.Add(nJoint = new Joint(j.X + i * v.X, j.Y + i * v.Y, j.Z + i * v.Z));
nJoint.Masses = j.Masses;
nJoint.DoF = j.DoF;
jSelection[j] = nJoint;
newJoints.Add(nJoint);
}
foreach (LineElement l in lines)
{
lList.Add(nLine = new LineElement(l, jSelection[l.I], jSelection[l.J]));
newLines.Add(nLine);
}
foreach (AreaElement a in areas)
{
aList.Add(nArea = new AreaElement(a, jSelection[a.J1], jSelection[a.J2], jSelection[a.J3], jSelection[a.J4]));
newAreas.Add(nArea);
}
services.ReportProgress((uint)(100 * i / n));
System.Windows.Forms.Application.DoEvents();
}
JoinCmd.Join(services.Model, newJoints, newLines, newAreas);
}
/// <summary>
/// Executes the command.
/// Copies the selected Items in a series around a given rotation axis.
/// </summary>
/// <param name="services">CommandServices object to interact with the system</param>
public override void Run(Canguro.Controller.CommandServices services)
{
Dictionary<Joint, Joint> joints = new Dictionary<Joint, Joint>();
Dictionary<Joint, Joint> jSelection = new Dictionary<Joint, Joint>();
List<LineElement> lines = new List<LineElement>();
List<LineElement> lSelection = new List<LineElement>();
List<AreaElement> areas = new List<AreaElement>();
List<AreaElement> aSelection = new List<AreaElement>();
ItemList<Joint> jList = services.Model.JointList;
ItemList<LineElement> lList = services.Model.LineList;
ItemList<AreaElement> aList = services.Model.AreaList;
Joint nJoint;
LineElement nLine;
AreaElement nArea;
List<Item> selection = services.GetSelection();
if (selection.Count == 0)
return;
foreach (Item item in selection)
{
if (item is Joint)
{
jSelection.Add((Joint)item, null);
joints.Add((Joint)item, null);
}
else if (item is LineElement)
{
LineElement l = (LineElement)item;
lSelection.Add(l);
lines.Add(l);
if (!jSelection.ContainsKey(l.I))
{
jSelection.Add(l.I, null);
joints.Add(l.I, null);
}
if (!jSelection.ContainsKey(l.J))
{
jSelection.Add(l.J, null);
joints.Add(l.J, null);
}
}
else if (item is AreaElement)
{
AreaElement a = (AreaElement)item;
aSelection.Add(a);
areas.Add(a);
if (!jSelection.ContainsKey(a.J1))
{
jSelection.Add(a.J1, null);
joints.Add(a.J1, null);
}
if (!jSelection.ContainsKey(a.J2))
{
jSelection.Add(a.J2, null);
joints.Add(a.J2, null);
}
if (!jSelection.ContainsKey(a.J3))
{
jSelection.Add(a.J3, null);
joints.Add(a.J3, null);
}
if (a.J4 != null && !jSelection.ContainsKey(a.J4))
{
jSelection.Add(a.J4, null);
joints.Add(a.J4, null);
}
}
}
Microsoft.DirectX.Vector3 v, v2;
uint n = (uint)services.GetSingle(Culture.Get("getArrayRepetition"));
float dAngle = float.Parse(services.GetString(Culture.Get("getPolarArrayAngle")));
dAngle *= (float)Math.PI / 180.0F;
float angle = 0.0F;
Controller.Snap.Magnet m = services.GetPoint(Culture.Get("getPolarRotationCenter"));
if (m == null) return;
v = m.SnapPosition;
services.TrackingService = LineTrackingService.Instance;
services.TrackingService.SetPoint(m.SnapPositionInt);
m = services.GetPoint(Culture.Get("getPolarRotationCenter"));
if (m == null) return;
v2 = m.SnapPosition;
if (v2.Equals(v))
{
Canguro.View.GraphicView view = Canguro.View.GraphicViewManager.Instance.ActiveView;
Vector3 v1Tmp = new Vector3(0, 0, 0);
Vector3 v2Tmp = new Vector3(0, 0, 1);
view.Unproject(ref v1Tmp);
view.Unproject(ref v2Tmp);
v2 = v2 + v1Tmp - v2Tmp;
}
services.TrackingService = null;
List<Joint> newJoints = new List<Joint>();
List<LineElement> newLines = new List<LineElement>();
List<AreaElement> newAreas = new List<AreaElement>();
for (int i = 1; i <= n; i++)
{
angle += dAngle;
Matrix trans1 = new Matrix();
trans1.Translate(-v);
Matrix rot = new Matrix();
rot.RotateAxis(v2 - v, angle);
Matrix trans2 = new Matrix();
trans2.Translate(v);
rot = trans1 * rot * trans2;
foreach (Joint j in joints.Keys)
{
Vector3 pos = new Vector3(j.X, j.Y, j.Z);
pos.TransformCoordinate(rot);
jList.Add(nJoint = new Joint(pos.X, pos.Y, pos.Z));
nJoint.Masses = j.Masses;
nJoint.DoF = j.DoF;
jSelection[j] = nJoint;
newJoints.Add(nJoint);
}
foreach (LineElement l in lines)
{
lList.Add(nLine = new LineElement(l, jSelection[l.I], jSelection[l.J]));
newLines.Add(nLine);
}
foreach (AreaElement a in areas)
{
aList.Add(nArea = new AreaElement(a, jSelection[a.J1], jSelection[a.J2], jSelection[a.J3], (a.J4 != null) ? jSelection[a.J4] : null));
newAreas.Add(nArea);
}
}
JoinCmd.Join(services.Model, newJoints, newLines, newAreas);
}