/// <summary>
/// Tests whether or not the rectangle intersects a Bezier curve</summary>
/// <param name="curve">Bezier curve</param>
/// <param name="rect">Rectangle, in Windows coordinates, such that the top y has
/// a lower value than the bottom y</param>
/// <param name="tolerance">The picking tolerance</param>
/// <returns>True iff the rectangle intersects the Bezier curve</returns>
public static bool Intersects(BezierCurve2F curve, RectangleF rect, float tolerance)
{
//Note that the convex hull around the 4 control points always contains the curve.
// Subdivide until we have line segments.
if (curve.Flatness <= tolerance)
{
// Test as a line segment from P1 to P4 for simplicity's sake. This could have
// some false negatives if the tangent points are far away and colinear.
Seg2F segment = new Seg2F(curve.P1, curve.P4);
if (Intersects(segment, rect))
{
return(true);
}
}
else
{
// Subdivide and try again.
BezierCurve2F left, right;
curve.Subdivide(0.5f, out left, out right);
if (Intersects(left, rect, tolerance))
{
return(true);
}
if (Intersects(right, rect, tolerance))
{
return(true);
}
}
return(false);
}
private void TestToStringWithCulture(CultureInfo culture)
{
CultureInfo originalCulture = Thread.CurrentThread.CurrentCulture;
Thread.CurrentThread.CurrentCulture = culture;
try
{
string listSeparator = culture.TextInfo.ListSeparator;
string decimalSeparator = culture.NumberFormat.NumberDecimalSeparator;
var o = new BezierCurve2F(
new Vec2F(1.1f, 2.2f),
new Vec2F(4.4f, 5.5f),
new Vec2F(7.7f, 8.8f),
new Vec2F(10.10f, 11.11f));
string s = o.ToString(null, null);
TestToStringResults(o, s, listSeparator, decimalSeparator);
string s2 = o.ToString();
Assert.AreEqual(s, s2);
s = o.ToString("G", culture);
TestToStringResults(o, s, listSeparator, decimalSeparator);
s = o.ToString("R", culture);
TestToStringResults(o, s, listSeparator, decimalSeparator);
}
finally
{
Thread.CurrentThread.CurrentCulture = originalCulture;
}
}
private bool PickEdge(TWire edge, Point p, Graphics g)
{
ElementTypeInfo fromInfo = GetElementTypeInfo(edge.FromNode, g);
TPin inputPin = edge.ToRoute;
TPin outputPin = edge.FromRoute;
Point p1 = edge.FromNode.Bounds.Location;
int x1 = p1.X + fromInfo.Size.Width;
int y1 = p1.Y + GetPinOffset(outputPin.Index);
Point p2 = edge.ToNode.Bounds.Location;
int x2 = p2.X;
int y2 = p2.Y + GetPinOffset(inputPin.Index);
int tanLen = GetTangentLength(x1, x2);
BezierCurve2F curve = new BezierCurve2F(
new Vec2F(x1, y1),
new Vec2F(x1 + tanLen, y1),
new Vec2F(x2 - tanLen, y2),
new Vec2F(x2, y2));
Vec2F hitPoint = new Vec2F();
return(BezierCurve2F.Pick(curve, new Vec2F(p.X, p.Y), m_theme.PickTolerance, ref hitPoint));
}
/// <summary>
/// Draws a partially defined graph edge</summary>
/// <param name="fromNode">Source node, or null</param>
/// <param name="fromRoute">Source route, or null</param>
/// <param name="toNode">Destination node, or null</param>
/// <param name="toRoute">Destination route, or null</param>
/// <param name="label">Edge label</param>
/// <param name="endPoint">Endpoint to substitute for source or destination, if either is null</param>
/// <param name="g">Graphics object</param>
public override void Draw(
TNode fromNode,
BoundaryRoute fromRoute,
TNode toNode,
BoundaryRoute toRoute,
string label,
Point endPoint,
D2dGraphics g)
{
// put endpoint into statechart space
var inverse = g.Transform;
inverse.Invert();
PointF end = Matrix3x2F.TransformPoint(inverse, endPoint);
PointF p1;
PointF normal1;
if (fromNode != null)
{
p1 = ParameterToPoint(fromNode.Bounds, fromRoute.Position, out normal1);
}
else
{
p1 = end;
normal1 = new Point();
}
PointF p4;
PointF normal2;
if (toNode != null)
{
p4 = ParameterToPoint(toNode.Bounds, toRoute.Position, out normal2);
}
else
{
p4 = end;
normal2 = new Point();
}
PointF p2, p3;
float d = GetTransitionPoints(p1, normal1, p4, normal2, out p2, out p3);
DrawEdgeSpline(p1, p2, p3, p4, d, m_theme.OutlineBrush, g);
if (!string.IsNullOrEmpty(label))
{
BezierCurve2F curve = new BezierCurve2F(p1, p2, p3, p4);
Vec2F midpoint = curve.Evaluate(0.5f);
g.DrawText(label, m_centerText, new PointF(midpoint.X, midpoint.Y), m_theme.TextBrush);
}
}
private void Draw(TEdge edge, Pen pen, Graphics g)
{
Point p1, p2, p3, p4;
float d = GetTransitionPoints(edge, out p1, out p2, out p3, out p4);
DrawEdgeSpline(p1, p2, p3, p4, d, pen, g);
BezierCurve2F curve = new BezierCurve2F(p1, p2, p3, p4);
Vec2F midpoint = curve.Evaluate(0.5f);
midpoint.X += 2;
g.DrawString(edge.Label, m_theme.Font, m_theme.TextBrush, new PointF(midpoint.X, midpoint.Y));
}
private bool Pick(TEdge edge, Vec2F v)
{
int tolerance = m_theme.PickTolerance;
Point p1, p2, p3, p4;
GetTransitionPoints(edge, out p1, out p2, out p3, out p4);
// check for hit on transition, away from endpoints
BezierCurve2F curve = new BezierCurve2F(p1, p2, p3, p4);
Vec2F hitPoint = new Vec2F();
return(BezierCurve2F.Pick(curve, v, m_theme.PickTolerance, ref hitPoint));
}
/// <summary>
/// Draws a partially defined graph edge</summary>
/// <param name="fromNode">Source node, or null</param>
/// <param name="fromRoute">Source route, or null</param>
/// <param name="toNode">Destination node, or null</param>
/// <param name="toRoute">Destination route, or null</param>
/// <param name="label">Edge label</param>
/// <param name="endPoint">Endpoint to substitute for source or destination, if either is null</param>
/// <param name="g">Graphics object</param>
public override void Draw(
TNode fromNode,
BoundaryRoute fromRoute,
TNode toNode,
BoundaryRoute toRoute,
string label,
Point endPoint,
Graphics g)
{
// put endpoint into statechart space
endPoint = GdiUtil.InverseTransform(g.Transform, endPoint);
Point p1;
Point normal1;
if (fromNode != null)
{
p1 = ParameterToPoint(fromNode.Bounds, fromRoute.Position, out normal1);
}
else
{
p1 = endPoint;
normal1 = new Point();
}
Point p4;
Point normal2;
if (toNode != null)
{
p4 = ParameterToPoint(toNode.Bounds, toRoute.Position, out normal2);
}
else
{
p4 = endPoint;
normal2 = new Point();
}
Point p2, p3;
float d = GetTransitionPoints(p1, normal1, p4, normal2, out p2, out p3);
DrawEdgeSpline(p1, p2, p3, p4, d, m_theme.OutlinePen, g);
BezierCurve2F curve = new BezierCurve2F(p1, p2, p3, p4);
Vec2F midpoint = curve.Evaluate(0.5f);
midpoint.X += 2;
g.DrawString(label, m_theme.Font, m_theme.TextBrush, new PointF(midpoint.X, midpoint.Y));
}
private void Draw(TEdge edge, D2dBrush brush, D2dGraphics g)
{
PointF p1, p2, p3, p4;
float d = GetTransitionPoints(edge, out p1, out p2, out p3, out p4);
DrawEdgeSpline(p1, p2, p3, p4, d, brush, g);
GdiUtil.MakeRectangle(p1, p2);
BezierCurve2F curve = new BezierCurve2F(p1, p2, p3, p4);
Vec2F midpoint = curve.Evaluate(0.5f);
midpoint.X += 2;
string label = edge.Label;
if (!string.IsNullOrEmpty(label))
{
g.DrawText(edge.Label, m_theme.TextFormat, new PointF(midpoint.X, midpoint.Y), m_theme.TextBrush);
}
}
private void TestToStringResults(BezierCurve2F o, string s, string listSeparator, string decimalSeparator)
{
string[] results = s.Split(new[] { listSeparator }, StringSplitOptions.RemoveEmptyEntries);
Assert.AreEqual(results.Length, 8);
foreach (string oneFloatString in results)
{
Assert.True(oneFloatString.Contains(decimalSeparator));
}
Assert.AreEqual(float.Parse(results[0]), o.P1.X);
Assert.AreEqual(float.Parse(results[1]), o.P1.Y);
Assert.AreEqual(float.Parse(results[2]), o.P2.X);
Assert.AreEqual(float.Parse(results[3]), o.P2.Y);
Assert.AreEqual(float.Parse(results[4]), o.P3.X);
Assert.AreEqual(float.Parse(results[5]), o.P3.Y);
Assert.AreEqual(float.Parse(results[6]), o.P4.X);
Assert.AreEqual(float.Parse(results[7]), o.P4.Y);
}
