/**
* <summary>Solves a two-dimensional linear program subject to linear
* constraints defined by lines and a circular constraint.</summary>
*
* <param name="lines">Lines defining the linear constraints.</param>
* <param name="numObstLines">Count of obstacle lines.</param>
* <param name="beginLine">The line on which the 2-d linear program
* failed.</param>
* <param name="radius">The radius of the circular constraint.</param>
* <param name="result">A reference to the result of the linear program.
* </param>
*/
private void linearProgram3(IList <Line> lines, int numObstLines, int beginLine, KInt radius, ref KInt2 result)
{
KInt distance = 0;
for (int i = beginLine; i < lines.Count; ++i)
{
if (RVOMath.det(lines[i].direction, lines[i].point - result) > distance)
{
/* Result does not satisfy constraint of line i. */
IList <Line> projLines = new List <Line>();
for (int ii = 0; ii < numObstLines; ++ii)
{
projLines.Add(lines[ii]);
}
for (int j = numObstLines; j < i; ++j)
{
Line line = new Line();
KInt determinant = RVOMath.det(lines[i].direction, lines[j].direction);
if (RVOMath.fabs(determinant) <= 0)
{
/* Line i and line j are parallel. */
if (RVOMath.Dot(lines[i].direction, lines[j].direction) > 0)
{
/* Line i and line j point in the same direction. */
continue;
}
else
{
/* Line i and line j point in opposite direction. */
line.point = (lines[i].point + lines[j].point) / 2;
}
}
else
{
line.point = lines[i].point + (RVOMath.det(lines[j].direction, lines[i].point - lines[j].point) / determinant) * lines[i].direction;
}
line.direction = RVOMath.normalize((lines[j].direction - lines[i].direction));
projLines.Add(line);
}
KInt2 tempResult = result;
if (linearProgram2(projLines, radius, KInt2.ToInt2(-lines[i].direction.IntY, lines[i].direction.IntX), true, ref result) < projLines.Count)
{
/*
* This should in principle not happen. The result is by
* definition already in the feasible region of this
* linear program. If it fails, it is due to small
* floating point error, and the current result is kept.
*/
result = tempResult;
}
distance = RVOMath.det(lines[i].direction, lines[i].point - result);
}
}
}
/**
* <summary>Computes the new velocity of this agent.</summary>
*/
internal void computeNewVelocity()
{
orcaLines_.Clear();
//KInt invTimeHorizonObst = 1 / timeHorizonObst_;
KInt tempradius = radius_ / timeHorizonObst_;
/* Create obstacle ORCA lines. */
for (int i = 0; i < obstacleNeighbors_.Count; ++i)
{
Obstacle obstacle1 = obstacleNeighbors_[i].Value;
Obstacle obstacle2 = obstacle1.next_;
KInt2 relativePosition1 = obstacle1.point_ - position_;
KInt2 relativePosition2 = obstacle2.point_ - position_;
/*
* Check if velocity obstacle of obstacle is already taken care
* of by previously constructed obstacle ORCA lines.
*/
bool alreadyCovered = false;
for (int j = 0; j < orcaLines_.Count; ++j)
{
if (RVOMath.det(relativePosition1 / timeHorizonObst_ - orcaLines_[j].point, orcaLines_[j].direction) - tempradius >= 0 && RVOMath.det(relativePosition2 / timeHorizonObst_ - orcaLines_[j].point, orcaLines_[j].direction) - tempradius >= 0)
{
alreadyCovered = true;
break;
}
}
if (alreadyCovered)
{
continue;
}
/* Not yet covered. Check for collisions. */
KInt distSq1 = RVOMath.absSq(relativePosition1);
KInt distSq2 = RVOMath.absSq(relativePosition2);
KInt radiusSq = RVOMath.sqr(radius_);
KInt2 obstacleVector = obstacle2.point_ - obstacle1.point_;
KInt s = (-RVOMath.Dot(relativePosition1, obstacleVector)) / RVOMath.absSq(obstacleVector);
KInt distSqLine = RVOMath.absSq(-relativePosition1 - s * obstacleVector);
Line line = new Line();
if (s < 0 && distSq1 <= radiusSq)
{
/* Collision with left vertex. Ignore if non-convex. */
if (obstacle1.convex_)
{
line.point = KInt2.zero;
line.direction = RVOMath.normalize(KInt2.ToInt2(-relativePosition1.IntY, relativePosition1.IntX));
orcaLines_.Add(line);
}
continue;
}
else if (s > 1 && distSq2 <= radiusSq)
{
/*
* Collision with right vertex. Ignore if non-convex or if
* it will be taken care of by neighboring obstacle.
*/
if (obstacle2.convex_ && RVOMath.det(relativePosition2, obstacle2.direction_) >= 0)
{
line.point = KInt2.zero;
line.direction = RVOMath.normalize(KInt2.ToInt2(-relativePosition2.IntY, relativePosition2.IntX));
orcaLines_.Add(line);
}
continue;
}
else if (s >= 0 && s < 1 && distSqLine <= radiusSq)
{
/* Collision with obstacle segment. */
line.point = KInt2.zero;
line.direction = -obstacle1.direction_;
orcaLines_.Add(line);
continue;
}
/*
* No collision. Compute legs. When obliquely viewed, both legs
* can come from a single vertex. Legs extend cut-off line when
* non-convex vertex.
*/
KInt2 leftLegDirection, rightLegDirection;
if (s < 0 && distSqLine <= radiusSq)
{
/*
* Obstacle viewed obliquely so that left vertex
* defines velocity obstacle.
*/
if (!obstacle1.convex_)
{
/* Ignore obstacle. */
continue;
}
obstacle2 = obstacle1;
KInt leg1 = RVOMath.sqrt(distSq1 - radiusSq);
leftLegDirection = KInt2.ToInt2(relativePosition1.IntX * leg1 - relativePosition1.IntY * radius_, relativePosition1.IntX * radius_ + relativePosition1.IntY * leg1) / distSq1;
rightLegDirection = KInt2.ToInt2(relativePosition1.IntX * leg1 + relativePosition1.IntY * radius_, -relativePosition1.IntX * radius_ + relativePosition1.IntY * leg1) / distSq1;
if (isover(leftLegDirection) || isover(rightLegDirection))
{
UnityEngine.Debug.LogError("!!!");
}
}
else if (s > 1 && distSqLine <= radiusSq)
{
/*
* Obstacle viewed obliquely so that
* right vertex defines velocity obstacle.
*/
if (!obstacle2.convex_)
{
/* Ignore obstacle. */
continue;
}
obstacle1 = obstacle2;
KInt leg2 = RVOMath.sqrt(distSq2 - radiusSq);
leftLegDirection = KInt2.ToInt2(relativePosition2.IntX * leg2 - relativePosition2.IntY * radius_, relativePosition2.IntX * radius_ + relativePosition2.IntY * leg2) / distSq2;
rightLegDirection = KInt2.ToInt2(relativePosition2.IntX * leg2 + relativePosition2.IntY * radius_, -relativePosition2.IntX * radius_ + relativePosition2.IntY * leg2) / distSq2;
if (isover(leftLegDirection) || isover(rightLegDirection))
{
Debug.LogError("!!!");
}
}
else
{
/* Usual situation. */
if (obstacle1.convex_)
{
KInt leg1 = RVOMath.sqrt(distSq1 - radiusSq);
leftLegDirection = KInt2.ToInt2(relativePosition1.IntX * leg1 - relativePosition1.IntY * radius_, relativePosition1.IntX * radius_ + relativePosition1.IntY * leg1) / distSq1;
if (isover(leftLegDirection))
{
Debug.LogError("!!!");
}
}
else
{
/* Left vertex non-convex; left leg extends cut-off line. */
leftLegDirection = -obstacle1.direction_;
if (isover(leftLegDirection))
{
Debug.LogError("!!!");
}
}
if (obstacle2.convex_)
{
KInt leg2 = RVOMath.sqrt(distSq2 - radiusSq);
rightLegDirection = KInt2.ToInt2(relativePosition2.IntX * leg2 + relativePosition2.IntY * radius_, -relativePosition2.IntX * radius_ + relativePosition2.IntY * leg2) / distSq2;
if (isover(rightLegDirection))
{
Debug.LogError("!!!");
}
}
else
{
/* Right vertex non-convex; right leg extends cut-off line. */
rightLegDirection = obstacle1.direction_;
if (isover(rightLegDirection))
{
Debug.LogError("!!!");
}
}
}
/*
* Legs can never point into neighboring edge when convex
* vertex, take cutoff-line of neighboring edge instead. If
* velocity projected on "foreign" leg, no constraint is added.
*/
Obstacle leftNeighbor = obstacle1.previous_;
bool isLeftLegForeign = false;
bool isRightLegForeign = false;
if (obstacle1.convex_ && RVOMath.det(leftLegDirection, -leftNeighbor.direction_) >= 0)
{
/* Left leg points into obstacle. */
leftLegDirection = -leftNeighbor.direction_;
if (isover(leftLegDirection))
{
Debug.LogError("!!!");
}
isLeftLegForeign = true;
}
if (obstacle2.convex_ && RVOMath.det(rightLegDirection, obstacle2.direction_) <= 0)
{
/* Right leg points into obstacle. */
rightLegDirection = obstacle2.direction_;
isRightLegForeign = true;
if (isover(rightLegDirection))
{
Debug.LogError("!!!");
}
}
/* Compute cut-off centers. */
KInt2 leftCutOff = (obstacle1.point_ - position_) / timeHorizonObst_;
KInt2 rightCutOff = (obstacle2.point_ - position_) / timeHorizonObst_;
KInt2 cutOffVector = rightCutOff - leftCutOff;
/* Project current velocity on velocity obstacle. */
/* Check if current velocity is projected on cutoff circles. */
KInt sqvalue = RVOMath.absSq(cutOffVector);
KInt t = KInt.ToInt(KInt.divscale / 2);
if (obstacle1 != obstacle2)
{
if (sqvalue == 0)
{
t = KInt.MaxValue;
}
else
{
t = RVOMath.Dot((velocity_ - leftCutOff), cutOffVector) / sqvalue;
}
}
KInt tLeft = RVOMath.Dot((velocity_ - leftCutOff), leftLegDirection);
KInt tRight = RVOMath.Dot((velocity_ - rightCutOff), rightLegDirection);
if ((t < 0 && tLeft < 0) || (obstacle1 == obstacle2 && tLeft < 0 && tRight < 0))
{
/* Project on left cut-off circle. */
KInt2 unitW = RVOMath.normalize((velocity_ - leftCutOff));
line.direction = KInt2.ToInt2(unitW.IntY, -unitW.IntX);
line.point = leftCutOff + radius_ * unitW / timeHorizonObst_;
orcaLines_.Add(line);
continue;
}
else if (t > 1 && tRight < 0)
{
/* Project on right cut-off circle. */
KInt2 unitW = RVOMath.normalize((velocity_ - rightCutOff));
line.direction = KInt2.ToInt2(unitW.IntY, -unitW.IntX);
line.point = rightCutOff + radius_ * unitW / timeHorizonObst_;
orcaLines_.Add(line);
continue;
}
/*
* Project on left leg, right leg, or cut-off line, whichever is
* closest to velocity.
*/
KInt distSqCutoff = (t < 0 || t > 1 || obstacle1 == obstacle2) ? KInt.MaxValue : RVOMath.absSq(velocity_ - (leftCutOff + t * cutOffVector));
KInt distSqLeft = tLeft < 0 ? KInt.MaxValue : RVOMath.absSq(velocity_ - (leftCutOff + tLeft * leftLegDirection));
KInt distSqRight = tRight < 0 ? KInt.MaxValue : RVOMath.absSq(velocity_ - (rightCutOff + tRight * rightLegDirection));
if (distSqCutoff <= distSqLeft && distSqCutoff <= distSqRight)
{
/* Project on cut-off line. */
line.direction = -obstacle1.direction_;
line.point = leftCutOff + radius_ * KInt2.ToInt2(-line.direction.IntY, line.direction.IntX) / timeHorizonObst_;
orcaLines_.Add(line);
continue;
}
if (distSqLeft <= distSqRight)
{
/* Project on left leg. */
if (isLeftLegForeign)
{
continue;
}
line.direction = leftLegDirection;
line.point = leftCutOff + radius_ * KInt2.ToInt2(-line.direction.IntY, line.direction.IntX) / timeHorizonObst_;
orcaLines_.Add(line);
continue;
}
/* Project on right leg. */
if (isRightLegForeign)
{
continue;
}
line.direction = -rightLegDirection;
line.point = rightCutOff + radius_ * KInt2.ToInt2(-line.direction.IntY, line.direction.IntX) / timeHorizonObst_;
orcaLines_.Add(line);
}
int numObstLines = orcaLines_.Count;
//KInt invTimeHorizon = 1 / timeHorizon_;
/* Create agent ORCA lines. */
for (int i = 0; i < agentNeighbors_.Count; ++i)
{
Agent other = agentNeighbors_[i].Value;
KInt2 relativePosition = other.position_ - position_;
KInt2 relativeVelocity = velocity_ - other.velocity_;
KInt distSq = RVOMath.absSq(relativePosition);
KInt combinedRadius = radius_ + other.radius_;
KInt combinedRadiusSq = RVOMath.sqr(combinedRadius);
Line line = new Line();
KInt2 u;
if (distSq > combinedRadiusSq)
{
/* No collision. */
KInt2 w = relativeVelocity - relativePosition / timeHorizon_;
/* Vector from cutoff center to relative velocity. */
KInt wLengthSq = RVOMath.absSq(w);
KInt dotProduct1 = RVOMath.Dot(w, relativePosition);
if (dotProduct1 < 0 && RVOMath.sqr(dotProduct1) > combinedRadiusSq * wLengthSq)
{
/* Project on cut-off circle. */
KInt wLength = RVOMath.sqrt(wLengthSq);
if (wLength == 0)
{
continue;
}
KInt2 unitW = w / wLength;
line.direction = KInt2.ToInt2(unitW.IntY, -unitW.IntX);
u = (combinedRadius / timeHorizon_ - wLength) * unitW;
}
else
{
/* Project on legs. */
KInt leg = RVOMath.sqrt(distSq - combinedRadiusSq);
if (RVOMath.det(relativePosition, w) > 0)
{
/* Project on left leg. */
line.direction = KInt2.ToInt2(relativePosition.IntX * leg - relativePosition.IntY * combinedRadius, relativePosition.IntX * combinedRadius + relativePosition.IntY * leg) / distSq;
}
else
{
/* Project on right leg. */
line.direction = -KInt2.ToInt2(relativePosition.IntX * leg + relativePosition.IntY * combinedRadius, -relativePosition.IntX * combinedRadius + relativePosition.IntY * leg) / distSq;
}
KInt dotProduct2 = RVOMath.Dot(relativeVelocity, line.direction);
u = dotProduct2 * line.direction - relativeVelocity;
}
}
else
{
/* Collision. Project on cut-off circle of time timeStep. */
//KInt invTimeStep = 1 / Simulator.Instance.timeStep_;
/* Vector from cutoff center to relative velocity. */
KInt2 w = relativeVelocity - relativePosition / Simulator.Instance.timeStep_;
KInt wLength = RVOMath.abs(w);
if (wLength == 0)
{
continue;
}
KInt2 unitW = w / wLength;
line.direction = KInt2.ToInt2(unitW.IntY, -unitW.IntX);
u = (combinedRadius / Simulator.Instance.timeStep_ - wLength) * unitW;
}
line.point = velocity_ + u / 2;
orcaLines_.Add(line);
}
int lineFail = linearProgram2(orcaLines_, maxSpeed_, prefVelocity_, false, ref newVelocity_);
if (lineFail < orcaLines_.Count)
{
linearProgram3(orcaLines_, numObstLines, lineFail, maxSpeed_, ref newVelocity_);
}
}
/**
* <summary>Solves a one-dimensional linear program on a specified line
* subject to linear constraints defined by lines and a circular
* constraint.</summary>
*
* <returns>True if successful.</returns>
*
* <param name="lines">Lines defining the linear constraints.</param>
* <param name="lineNo">The specified line constraint.</param>
* <param name="radius">The radius of the circular constraint.</param>
* <param name="optVelocity">The optimization velocity.</param>
* <param name="directionOpt">True if the direction should be optimized.
* </param>
* <param name="result">A reference to the result of the linear program.
* </param>
*/
private bool linearProgram1(IList <Line> lines, int lineNo, KInt radius, KInt2 optVelocity, bool directionOpt, ref KInt2 result)
{
KInt dotProduct = RVOMath.Dot(lines[lineNo].point, lines[lineNo].direction);
KInt discriminant = RVOMath.sqr(dotProduct) + RVOMath.sqr(radius) - RVOMath.absSq(lines[lineNo].point);
if (discriminant < 0)
{
/* Max speed circle fully invalidates line lineNo. */
return(false);
}
KInt sqrtDiscriminant = RVOMath.sqrt(discriminant);
KInt tLeft = -dotProduct - sqrtDiscriminant;
KInt tRight = -dotProduct + sqrtDiscriminant;
for (int i = 0; i < lineNo; ++i)
{
KInt denominator = RVOMath.det(lines[lineNo].direction, lines[i].direction);
KInt numerator = RVOMath.det(lines[i].direction, lines[lineNo].point - lines[i].point);
if (RVOMath.fabs(denominator) <= 0)
{
/* Lines lineNo and i are (almost) parallel. */
if (numerator < 0)
{
return(false);
}
continue;
}
KInt t = numerator / denominator;
if (denominator >= 0)
{
/* Line i bounds line lineNo on the right. */
tRight = KInt.Min(tRight, t);
}
else
{
/* Line i bounds line lineNo on the left. */
tLeft = KInt.Max(tLeft, t);
}
if (tLeft > tRight)
{
return(false);
}
}
if (directionOpt)
{
/* Optimize direction. */
if (RVOMath.Dot(optVelocity, lines[lineNo].direction) > 0)
{
/* Take right extreme. */
result = lines[lineNo].point + tRight * lines[lineNo].direction;
}
else
{
/* Take left extreme. */
result = lines[lineNo].point + tLeft * lines[lineNo].direction;
}
}
else
{
/* Optimize closest point. */
KInt t = RVOMath.Dot(lines[lineNo].direction, (optVelocity - lines[lineNo].point));
if (t < tLeft)
{
result = lines[lineNo].point + tLeft * lines[lineNo].direction;
}
else if (t > tRight)
{
result = lines[lineNo].point + tRight * lines[lineNo].direction;
}
else
{
result = lines[lineNo].point + t * lines[lineNo].direction;
}
}
return(true);
}