/// <summary>Constructor</summary>
/// <param name="wall">壁オブジェクト</param>
/// <param name="isSide1">壁面1か否か</param>
internal WallSurface(Wall wall, bool isSide1)
{
this.wall = wall;
this.isSide1 = isSide1;
//短波長・長波長の放射率[-]を初期化
SolarAbsorptance = 0.9;
LongWaveEmissivity = 0.6;
//イベント登録
wall.FIOChangeEvent += new EventHandler(wall_FIOChangeEvent);
wall.AreaChangeEvent += new EventHandler(wall_AreaChangeEvent);
}
/// <summary>壁熱貫流テスト</summary>
private static void wallHeatTransferTest()
{
WallLayers layers = new WallLayers();
WallLayers.Layer layer;
layer = new WallLayers.Layer(new WallMaterial("合板", 0.19, 716), 0.025);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("コンクリート", 1.4, 1934), 0.120);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("空気層", 1d / 0.086, 0), 0.020);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("ロックウール", 0.042, 84), 0.050);
layers.AddLayer(layer);
Wall wall = new Wall(layers);
wall.TimeStep = 3600;
wall.AirTemperature1 = 20;
wall.AirTemperature2 = 10;
wall.InitializeTemperature(10); //壁体内温度は10℃均一とする
wall.SurfaceArea = 1;
Console.WriteLine("温度分布の推移");
Console.WriteLine("合板, コンクリート, 空気層, ロックウール");
double[] temps;
for (int i = 0; i < 24; i++)
{
wall.Update();
temps = wall.GetTemperatures();
Console.Write((i + 1).ToString("F0").PadLeft(2) + "時間後 | ");
for (int j = 0; j < temps.Length - 1; j++) Console.Write(((temps[j] + temps[j + 1]) / 2d).ToString("F1") + " | ");
Console.WriteLine();
}
//定常状態まで進める
for (int i = 0; i < 1000; i++) wall.Update();
Console.WriteLine();
Console.WriteLine("定常状態の温度分布");
temps = wall.GetTemperatures();
for (int j = 0; j < temps.Length - 1; j++) Console.Write(((temps[j] + temps[j + 1]) / 2d).ToString("F1") + " | ");
Console.WriteLine();
Console.WriteLine("定常状態の熱流1: " + wall.GetHeatTransfer(true).ToString("F1"));
Console.WriteLine("定常状態の熱流2: " + wall.GetHeatTransfer(false).ToString("F1"));
Console.WriteLine("定常状態の熱流3: " + wall.GetStaticHeatTransfer().ToString("F1"));
Console.Read();
}
/// <summary>室の温湿度変動テスト(MultiRoomクラス)</summary>
private static void RoomModelTest2()
{
//気象データ:乾球温度,絶対湿度,夜間放射,直達日射,天空日射
double[] dbt = new double[] { 24.2, 24.1, 24.1, 24.2, 24.3, 24.2, 24.4, 25.1, 26.1, 27.1, 28.8, 29.9,
30.7, 31.2, 31.6, 31.4, 31.3, 30.8, 29.4, 28.1, 27.5, 27.1, 26.6, 26.3 };
double[] ahd = new double[] { 0.0134, 0.0136, 0.0134, 0.0133, 0.0131, 0.0134, 0.0138, 0.0142, 0.0142, 0.0140, 0.0147, 0.0149,
0.0142, 0.0146, 0.0140, 0.0145, 0.0144, 0.0146, 0.0142, 0.0136, 0.0136, 0.0135, 0.0136, 0.0140 };
double[] nrd = new double[] { 32, 30, 30, 29, 26, 24, 24, 25, 25, 25, 24, 24, 24, 23, 24, 24, 24, 24, 23, 23, 24, 26, 25, 23 };
double[] dnr = new double[] { 0, 0, 0, 0, 0, 0, 106, 185, 202, 369, 427, 499, 557, 522, 517, 480, 398, 255, 142, 2, 0, 0, 0, 0 };
double[] drd = new double[] { 0, 0, 0, 0, 0, 0, 36, 115, 198, 259, 314, 340, 340, 349, 319, 277, 228, 167, 87, 16, 0, 0, 0, 0 };
//屋外を作成
Outdoor outdoor = new Outdoor();
Sun sun = new Sun(Sun.City.Tokyo);
outdoor.Sun = sun;
outdoor.GroundTemperature = 25;
//傾斜を作成
Incline nIn = new Incline(Incline.Orientation.N, 0.5 * Math.PI); //北
Incline eIn = new Incline(Incline.Orientation.E, 0.5 * Math.PI); //東
Incline wIn = new Incline(Incline.Orientation.W, 0.5 * Math.PI); //西
Incline sIn = new Incline(Incline.Orientation.S, 0.5 * Math.PI); //南
Incline hIn = new Incline(Incline.Orientation.S, 0); //水平
//ゾーンを作成
Zone[] zones = new Zone[4];
Zone wpZone = zones[0] = new Zone("西室ペリメータ");
wpZone.Volume = 3 * 5 * 3;
Zone wiZone = zones[1] = new Zone("西室インテリア");
wiZone.Volume = 4 * 5 * 3;
Zone epZone = zones[2] = new Zone("東室ペリメータ");
epZone.Volume = 3 * 5 * 3;
Zone eiZone = zones[3] = new Zone("東室インテリア");
eiZone.Volume = 4 * 5 * 3;
foreach (Zone zn in zones)
{
zn.TimeStep = 3600;
zn.DrybulbTemperatureSetPoint = 26;
zn.HumidityRatioSetPoint = 0.01;
}
//東側インテリアに発熱体を設定
eiZone.AddHeatGain(new ConstantHeatGain(100, 100, 20));
//壁構成を作成:400mmコンクリート
WallLayers wl = new WallLayers();
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.ReinforcedConcrete), 0.4));
//窓構成を作成
GlassPanes gPanes = new GlassPanes(new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.HeatReflectingGlass06mm));
//壁体をゾーンに追加
Wall[] walls = new Wall[18];
List<WallSurface> outdoorSurfaces = new List<WallSurface>();
Wall wpwWall = walls[0] = new Wall(wl, "西室ペリメータ西壁");
wpwWall.SurfaceArea = 3 * 3;
outdoorSurfaces.Add(wpwWall.GetSurface(true));
wpZone.AddSurface(wpwWall.GetSurface(false));
wpwWall.SetIncline(wIn, true);
Wall wpcWall = walls[1] = new Wall(wl, "西室ペリメータ天井");
wpcWall.SurfaceArea = 3 * 5;
outdoorSurfaces.Add(wpcWall.GetSurface(true));
wpZone.AddSurface(wpcWall.GetSurface(false));
wpcWall.SetIncline(hIn, true);
Wall wpfWall = walls[2] = new Wall(wl, "西室ペリメータ床");
wpfWall.SurfaceArea = 3 * 5;
outdoor.AddGroundWallSurface(wpfWall.GetSurface(true));
wpZone.AddSurface(wpfWall.GetSurface(false));
Wall winWall = walls[3] = new Wall(wl, "西室インテリア北壁");
winWall.SurfaceArea = 3 * 5;
outdoorSurfaces.Add(winWall.GetSurface(true));
wiZone.AddSurface(winWall.GetSurface(false));
winWall.SetIncline(nIn, true);
Wall wiwWall = walls[4] = new Wall(wl, "西室インテリア西壁");
wiwWall.SurfaceArea = 3 * 4;
outdoorSurfaces.Add(wiwWall.GetSurface(true));
wiZone.AddSurface(wiwWall.GetSurface(false));
wiwWall.SetIncline(wIn, true);
Wall wicWall = walls[5] = new Wall(wl, "西室インテリア天井");
wicWall.SurfaceArea = 4 * 5;
outdoorSurfaces.Add(wicWall.GetSurface(true));
wiZone.AddSurface(wicWall.GetSurface(false));
wicWall.SetIncline(hIn, true);
Wall wifWall = walls[6] = new Wall(wl, "西室インテリア床");
wifWall.SurfaceArea = 4 * 5;
outdoor.AddGroundWallSurface(wifWall.GetSurface(true));
wiZone.AddSurface(wifWall.GetSurface(false));
Wall epwWall = walls[7] = new Wall(wl, "東室ペリメータ東壁");
epwWall.SurfaceArea = 3 * 3;
outdoorSurfaces.Add(epwWall.GetSurface(true));
epZone.AddSurface(epwWall.GetSurface(false));
epwWall.SetIncline(eIn, true);
Wall epcWall = walls[8] = new Wall(wl, "東室ペリメータ天井");
epcWall.SurfaceArea = 3 * 5;
outdoorSurfaces.Add(epcWall.GetSurface(true));
epZone.AddSurface(epcWall.GetSurface(false));
epcWall.SetIncline(hIn, true);
Wall epfWall = walls[9] = new Wall(wl, "東室ペリメータ床");
epfWall.SurfaceArea = 3 * 5;
outdoor.AddGroundWallSurface(epfWall.GetSurface(true));
epZone.AddSurface(epfWall.GetSurface(false));
Wall einWall = walls[10] = new Wall(wl, "東室インテリア北壁");
einWall.SurfaceArea = 5 * 3;
outdoorSurfaces.Add(einWall.GetSurface(true));
eiZone.AddSurface(einWall.GetSurface(false));
einWall.SetIncline(nIn, true);
Wall eiwWall = walls[11] = new Wall(wl, "東室インテリア東壁");
eiwWall.SurfaceArea = 4 * 3;
outdoorSurfaces.Add(eiwWall.GetSurface(true));
eiZone.AddSurface(eiwWall.GetSurface(false));
eiwWall.SetIncline(eIn, true);
Wall eicWall = walls[12] = new Wall(wl, "東室インテリア天井");
eicWall.SurfaceArea = 4 * 5;
outdoorSurfaces.Add(eicWall.GetSurface(true));
eiZone.AddSurface(eicWall.GetSurface(false));
eicWall.SetIncline(hIn, true);
Wall eifWall = walls[13] = new Wall(wl, "東室インテリア床");
eifWall.SurfaceArea = 4 * 5;
outdoor.AddGroundWallSurface(eifWall.GetSurface(true));
eiZone.AddSurface(eifWall.GetSurface(false));
Wall cpWall = walls[14] = new Wall(wl, "ペリメータ部の内壁");
cpWall.SurfaceArea = 3 * 3;
wpZone.AddSurface(cpWall.GetSurface(true));
epZone.AddSurface(cpWall.GetSurface(false));
Wall ciWall = walls[15] = new Wall(wl, "インテリア部の内壁");
ciWall.SurfaceArea = 4 * 3;
wiZone.AddSurface(ciWall.GetSurface(true));
eiZone.AddSurface(ciWall.GetSurface(false));
Wall wpsWall = walls[16] = new Wall(wl, "西側ペリメータ南壁");
wpsWall.SurfaceArea = 5 * 3 - 3 * 2;
outdoorSurfaces.Add(wpsWall.GetSurface(true));
wpZone.AddSurface(wpsWall.GetSurface(false));
wpsWall.SetIncline(sIn, true);
Wall epsWall = walls[17] = new Wall(wl, "東側ペリメータ南壁");
epsWall.SurfaceArea = 5 * 3 - 3 * 2;
outdoorSurfaces.Add(epsWall.GetSurface(true));
epZone.AddSurface(epsWall.GetSurface(false));
epsWall.SetIncline(sIn, true);
//外表面を初期化
foreach (WallSurface ws in outdoorSurfaces)
{
//屋外に追加
outdoor.AddWallSurface(ws);
//放射率を初期化
ws.InitializeEmissivity(WallSurface.SurfaceMaterial.Concrete);
}
//窓をゾーンに追加
Window wWind = new Window(gPanes, "西室ペリメータ南窓");
wWind.SurfaceArea = 3 * 2;
wpZone.AddWindow(wWind);
outdoor.AddWindow(wWind);
Window eWind = new Window(gPanes, "東室ペリメータ南窓");
eWind.SurfaceArea = 3 * 2;
eWind.Shade = SunShade.MakeHorizontalSunShade(3, 2, 1, 1, 1, 0.5, sIn);
wpZone.AddWindow(eWind);
outdoor.AddWindow(eWind);
//多数室オブジェクトを作成
Room eRm = new Room(new Zone[] { epZone, eiZone }); //東側の室
Room wRm = new Room(new Zone[] { wpZone, wiZone }); //西側の室
MultiRoom mRoom = new MultiRoom(new Room[] { eRm, wRm }); //多数室
mRoom.SetTimeStep(3600);
//換気の設定
wpZone.VentilationVolume = 10; //西室ペリメータのみ外気導入
mRoom.SetAirFlow(wpZone, wiZone, 10);
mRoom.SetAirFlow(epZone, eiZone, 10);
mRoom.SetAirFlow(eiZone, epZone, 10);
//短波長放射の入射比率を調整:ペリメータ床面6割、その他は面積比率
double sfSum = 0;
foreach (ISurface isf in eRm.GetSurface()) sfSum += isf.Area;
sfSum -= epfWall.SurfaceArea;
foreach (ISurface isf in eRm.GetSurface()) eRm.SetShortWaveRadiationRate(isf, isf.Area / sfSum * 0.4);
eRm.SetShortWaveRadiationRate(epfWall.GetSurface(false), 0.6);
sfSum = 0;
foreach (ISurface isf in wRm.GetSurface()) sfSum += isf.Area;
sfSum -= wpfWall.SurfaceArea;
foreach (ISurface isf in wRm.GetSurface()) wRm.SetShortWaveRadiationRate(isf, isf.Area / sfSum * 0.4);
wRm.SetShortWaveRadiationRate(wpfWall.GetSurface(false), 0.6);
//タイトル行書き出し
StreamWriter sWriter = new StreamWriter("室の温湿度変動テスト2.csv", false, Encoding.GetEncoding("Shift_JIS"));
foreach (Zone zn in zones) sWriter.Write(zn.Name + "乾球温度[C], " + zn.Name + "絶対湿度[kg/kgDA], " + zn.Name + "顕熱負荷[W], " + zn.Name + "潜熱負荷[W], ");
sWriter.WriteLine();
//計算実行
for (int i = 0; i < 100; i++)
{
DateTime dTime = new DateTime(2007, 8, 3, 0, 0, 0);
for (int j = 0; j < 24; j++)
{
//時刻を設定
sun.Update(dTime);
mRoom.SetCurrentDateTime(dTime);
//空調設定
bool operating = (8 <= dTime.Hour && dTime.Hour <= 19);
foreach (Zone zn in zones)
{
zn.ControlHumidityRatio = operating;
zn.ControlDrybulbTemperature = operating;
}
//気象条件を設定
outdoor.AirState = new MoistAir(dbt[j], ahd[j]);
outdoor.NocturnalRadiation = nrd[j];
sun.SetGlobalHorizontalRadiation(drd[j], dnr[j]);
//換気の設定
wpZone.VentilationAirState = outdoor.AirState;
//外壁表面の状態を設定
outdoor.SetWallSurfaceBoundaryState();
//壁体を更新
foreach (Wall wal in walls) wal.Update();
//多数室を更新
mRoom.UpdateRoomTemperatures();
mRoom.UpdateRoomHumidities();
//時刻を更新
dTime = dTime.AddHours(1);
//書き出し設定
if (i == 99)
{
foreach (Zone zn in zones)
{
sWriter.Write(zn.CurrentDrybulbTemperature.ToString("F1") + ", " + zn.CurrentHumidityRatio.ToString("F3") + ", " +
zn.CurrentSensibleHeatLoad.ToString("F0") + ", " + zn.CurrentLatentHeatLoad.ToString("F0") + ", ");
}
sWriter.WriteLine();
}
}
}
sWriter.Close();
}
private static void makeGroundCouplingBuilding(out Zone[] rooms, out Wall[] walls, out Window[] windows, out Outdoor[] outdoor, out Sun sun)
{
//放射率
double extswEmissivity = 0.9;
double extlwEmissivity = 0.6;
//表面熱伝達率
double ao = 29.3;
double aowin = 21;
double ai = 8.29;
double ago = 100000;
//室を作成
rooms = new Zone[1];
rooms[0] = new Zone();
rooms[0].Volume = 8 * 6 * 2.7; //室容積[m3]
//内部負荷[W]
rooms[0].AddHeatGain(new ConstantHeatGain(200 * 0.4, 200 * 0.6, 0));
if (CALCULATE_ELEVATION_EFFECT) rooms[0].AtmosphericPressure = MoistAir.GetAtmosphericPressure(1609);
else rooms[0].AtmosphericPressure = 101.325d;
rooms[0].TimeStep = 3600;
rooms[0].InitializeAirState(20, 0.01);
rooms[0].FilmCoefficient = ai;
//対流成分
rooms[0].SetConvectiveRate(3.16 / ai);
//漏気量
rooms[0].VentilationVolume = rooms[0].Volume * 0.5;
if (!CALCULATE_ELEVATION_EFFECT) rooms[0].Volume *= 0.82;
//外界を作成
outdoor = new Outdoor[2];
outdoor[0] = new Outdoor();
outdoor[1] = new Outdoor();
sun = new Sun(39.8, 360 - 104.9, 360 - 105);
outdoor[0].Sun = sun;
//壁構成を作成
WallLayers exwL, flwL, rfwL, grwL;
makeWallLayer(true, out exwL, out flwL, out rfwL);
makeGroundWallLayer(out flwL, out grwL);
//壁表面を作成
WallSurface ews, iws;
//壁リストを作成
walls = new Wall[9];
//屋根を作成
walls[0] = new Wall(rfwL);
walls[0].Name = "屋根";
walls[0].SurfaceArea = 48;
walls[0].SetIncline(new Incline(Incline.Orientation.N, 0), false);
walls[0].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[0].SetFilmCoefficient(ao, false); //外表面総合熱伝達率[W/(m2K)]
walls[0].InitializeTemperature(25);
//壁表面の設定
iws = walls[0].GetSurface(true);
ews = walls[0].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//床を作成
walls[1] = new Wall(flwL);
walls[1].Name = "床";
walls[1].SurfaceArea = 48;
walls[1].SetIncline(new Incline(Incline.Orientation.N, Math.PI), false);
walls[1].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[1].SetFilmCoefficient(ago, false); //外表面総合熱伝達率[W/(m2K)]//地面絶縁体
walls[1].InitializeTemperature(25);
//壁表面の設定
iws = walls[1].GetSurface(true);
ews = walls[1].GetSurface(false);
rooms[0].AddSurface(iws);
outdoor[1].AddGroundWallSurface(ews);
//北外壁を作成
walls[2] = new Wall(exwL);
walls[2].Name = "北外壁";
walls[2].SurfaceArea = 8 * 1.35;
walls[2].SetIncline(new Incline(Incline.Orientation.N, 0.5 * Math.PI), false);
walls[2].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[2].SetFilmCoefficient(ao, false); //外表面総合熱伝達率[W/(m2K)]
walls[2].InitializeTemperature(25);
//壁表面の設定
iws = walls[2].GetSurface(true);
ews = walls[2].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//北外壁（土中）を作成
walls[3] = new Wall(grwL);
walls[3].Name = "北外壁（土中）";
walls[3].SurfaceArea = 8 * 1.35;
walls[3].SetIncline(new Incline(Incline.Orientation.N, 0.5 * Math.PI), false);
walls[3].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[3].SetFilmCoefficient(ago, false); //外表面総合熱伝達率[W/(m2K)]
walls[3].InitializeTemperature(25);
//壁表面の設定
iws = walls[3].GetSurface(true);
ews = walls[3].GetSurface(false);
rooms[0].AddSurface(iws);
outdoor[0].AddGroundWallSurface(ews);
//東外壁を作成
walls[4] = new Wall(exwL);
walls[4].Name = "東外壁";
walls[4].SurfaceArea = 6 * 1.35;
walls[4].SetIncline(new Incline(Incline.Orientation.E, 0.5 * Math.PI), false);
walls[4].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[4].SetFilmCoefficient(ao, false); //外表面総合熱伝達率[W/(m2K)]
walls[4].InitializeTemperature(25);
//壁表面の設定
iws = walls[4].GetSurface(true);
ews = walls[4].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//東外壁（土中）を作成
walls[5] = new Wall(grwL);
walls[5].Name = "東外壁（土中）";
walls[5].SurfaceArea = 6 * 1.35;
walls[5].SetIncline(new Incline(Incline.Orientation.E, 0.5 * Math.PI), false);
walls[5].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[5].SetFilmCoefficient(ago, false); //外表面総合熱伝達率[W/(m2K)]
walls[5].InitializeTemperature(25);
//壁表面の設定
iws = walls[5].GetSurface(true);
ews = walls[5].GetSurface(false);
rooms[0].AddSurface(iws);
outdoor[0].AddGroundWallSurface(ews);
//西外壁を作成
walls[6] = new Wall(exwL);
walls[6].Name = "西外壁";
walls[6].SurfaceArea = 6 * 1.35;
walls[6].SetIncline(new Incline(Incline.Orientation.W, 0.5 * Math.PI), false);
walls[6].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[6].SetFilmCoefficient(ao, false); //外表面総合熱伝達率[W/(m2K)]
walls[6].InitializeTemperature(25);
//壁表面の設定
iws = walls[6].GetSurface(true);
ews = walls[6].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//西外壁（土中）を作成
walls[7] = new Wall(grwL);
walls[7].Name = "西外壁（土中）";
walls[7].SurfaceArea = 6 * 1.35;
walls[7].SetIncline(new Incline(Incline.Orientation.W, 0.5 * Math.PI), false);
walls[7].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[7].SetFilmCoefficient(ago, false); //外表面総合熱伝達率[W/(m2K)]
walls[7].InitializeTemperature(25);
//壁表面の設定
iws = walls[7].GetSurface(true);
ews = walls[7].GetSurface(false);
rooms[0].AddSurface(iws);
outdoor[0].AddGroundWallSurface(ews);
//南外壁（土中）
walls[8] = new Wall(grwL);
walls[8].Name = "南外壁（土中）";
walls[8].SurfaceArea = 8 * 1.35;
walls[8].SetIncline(new Incline(Incline.Orientation.S, 0.5 * Math.PI), false);
walls[8].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[8].SetFilmCoefficient(ago, false); //外表面総合熱伝達率[W/(m2K)]
walls[8].InitializeTemperature(25);
//壁表面の設定
iws = walls[8].GetSurface(true);
ews = walls[8].GetSurface(false);
rooms[0].AddSurface(iws);
outdoor[0].AddGroundWallSurface(ews);
//窓を作成
GlassPanes glassPanes = new GlassPanes(0.74745, 0.043078, 1d / (1d / 333 + 1d / 333 + 1d / 6.297));
//glassPanes.LongWaveEmissivity = extlwEmissivity;
//glassPanes.ConvectiveRate = 3.16 / ai;
glassPanes.AngularDependenceCoefficients = new double[] { 1.3930, 5.5401, -19.5736, 19.0379 };
Window window1 = new Window(glassPanes);
Window window2 = new Window(glassPanes);
//長波長吸収率
WindowSurface ws;
ws = window1.GetSurface(true);
ws.LongWaveEmissivity = extlwEmissivity;
ws.FilmCoefficient = aowin; //表面総合熱伝達率[W/(m2K)]
ws.Albedo = 0.2;
ws = window2.GetSurface(true);
ws.LongWaveEmissivity = extlwEmissivity;
ws.FilmCoefficient = aowin; //表面総合熱伝達率[W/(m2K)]
ws.Albedo = 0.2;
//対流・放射成分
ws = window1.GetSurface(false);
ws.FilmCoefficient = ai; //表面総合熱伝達率[W/(m2K)]
ws.ConvectiveRate = 3.16 / ai;
ws = window2.GetSurface(false);
ws.FilmCoefficient = ai; //表面総合熱伝達率[W/(m2K)]
ws.ConvectiveRate = 3.16 / ai;
//窓面積
window1.SurfaceArea = 5.4;
window2.SurfaceArea = 5.4;
window1.OutSideIncline = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
window2.OutSideIncline = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
//室と外界に追加
rooms[0].AddWindow(window1);
rooms[0].AddWindow(window2);
outdoor[0].AddWindow(window1);
outdoor[0].AddWindow(window2);
windows = new Window[] { window1, window2 };
//短波長放射入射比率を設定
rooms[0].SetShortWaveRadiationRate(walls[1].GetSurface(true), 0.642); //床面
rooms[0].SetShortWaveRadiationRate(walls[0].GetSurface(true), 0.168); //天井面
rooms[0].SetShortWaveRadiationRate(walls[4].GetSurface(true), 0.038 * 0.5); //東面
rooms[0].SetShortWaveRadiationRate(walls[6].GetSurface(true), 0.038 * 0.5); //西面
rooms[0].SetShortWaveRadiationRate(walls[2].GetSurface(true), 0.053 * 0.5); //北面
rooms[0].SetShortWaveRadiationRate(walls[5].GetSurface(true), 0.038 * 0.5); //東面（土中）
rooms[0].SetShortWaveRadiationRate(walls[7].GetSurface(true), 0.038 * 0.5); //西面（土中）
rooms[0].SetShortWaveRadiationRate(walls[3].GetSurface(true), 0.053 * 0.5); //北面（土中）
rooms[0].SetShortWaveRadiationRate(walls[8].GetSurface(true), 0.026 * 10.8 / 9.6); //南面（土中）
if (0 < windows.Length)
{
rooms[0].SetShortWaveRadiationRate(windows[0], 0.0175 * 10.8 / 12d);
rooms[0].SetShortWaveRadiationRate(windows[1], 0.0175 * 10.8 / 12d);
}
//対流成分設定
rooms[0].SetConvectiveRate(3.16 / ai);
outdoor[0].SetConvectiveRate(24.67 / ao);
}
private static void makeBuilding(TestCase tCase, out Zone[] rooms, out Wall[] walls, out Window[] windows, out Outdoor[] outdoor, out Sun sun)
{
if (tCase == TestCase.C960)
{
makeSunZoneBuilding(out rooms, out walls, out windows, out outdoor, out sun);
return;
}
else if (tCase == TestCase.C990)
{
makeGroundCouplingBuilding(out rooms, out walls, out windows, out outdoor, out sun);
return;
}
bool hasEWWindow = (tCase & TestCase.HasEWWindow) == tCase;
bool hasSunShade = (tCase & TestCase.HasSunShade) == tCase;
bool hasHeatGain = (tCase & TestCase.HasHeatGain) == tCase;
bool hasHighConcuctanceWall = (tCase & TestCase.HasHighConcuctanceWall) == tCase;
bool isLowIntIREmissivity = (tCase & TestCase.LowIntIREmissivity) == tCase;
bool isLowExtIREmissivity = (tCase & TestCase.LowExtIREmissivity) == tCase;
bool isLowIntSWEmissivity = (tCase & TestCase.LowIntSWEmissivity) == tCase;
bool isHighIntSWEmissivity = (tCase & TestCase.HighIntSWEmissivity) == tCase;
bool noInfiltration = (tCase & TestCase.NoInfiltration) == tCase;
bool isLowExtSWEmissivity = (tCase & TestCase.LowExtSWEmissivity) == tCase;
bool isHeavyWeight = (tCase & TestCase.HeavyWeight) == tCase;
bool noWindow = (tCase & TestCase.NoWindow) == tCase;
//放射率
double extswEmissivity, extlwEmissivity;
if (isLowExtIREmissivity) extlwEmissivity = 0.1;
else extlwEmissivity = 0.9;
if (tCase == TestCase.C250) extswEmissivity = 0.9;
else if (isLowExtSWEmissivity) extswEmissivity = 0.1;
else extswEmissivity = 0.6;
//表面熱伝達率
double ao, aowin, ai;
if (isLowExtIREmissivity)
{
ao = 25.2;
aowin = 16.9;
}
else
{
ao = 29.3;
aowin = 21;
}
if (isLowIntIREmissivity) ai = 3.73;
else ai = 8.29;
//室を作成
rooms = new Zone[1];
rooms[0] = new Zone();
rooms[0].Volume = 8 * 6 * 2.7; //室容積[m3]
//内部負荷[W]
if (hasHeatGain) rooms[0].AddHeatGain(new ConstantHeatGain(200 * 0.4, 200 * 0.6, 0));
if (CALCULATE_ELEVATION_EFFECT) rooms[0].AtmosphericPressure = MoistAir.GetAtmosphericPressure(1609);
else rooms[0].AtmosphericPressure = 101.325d;
rooms[0].TimeStep = 3600;
rooms[0].InitializeAirState(20, 0.01);
rooms[0].FilmCoefficient = ai;
//対流成分
rooms[0].SetConvectiveRate(3.16 / ai);
//漏気量
if (tCase == TestCase.C230) rooms[0].VentilationVolume = rooms[0].Volume;
else if (noInfiltration) rooms[0].VentilationVolume = 0;
else rooms[0].VentilationVolume = rooms[0].Volume * 0.5;
if (!CALCULATE_ELEVATION_EFFECT) rooms[0].VentilationVolume *= 0.82;
//外界を作成
outdoor = new Outdoor[2];
outdoor[0] = new Outdoor();
outdoor[0].GroundTemperature = 10;
sun = new Sun(39.8, 360 - 104.9, 360 - 105);
outdoor[0].Sun = sun;
//壁構成を作成
WallLayers exwL, flwL, rfwL;
makeWallLayer(!isHeavyWeight, out exwL, out flwL, out rfwL);
//壁表面を作成
WallSurface ews, iws;
//壁リストを作成
if (hasHighConcuctanceWall) walls = new Wall[7];
else walls = new Wall[6];
//屋根を作成
walls[0] = new Wall(rfwL);
walls[0].Name = "屋根";
walls[0].SurfaceArea = 48;
walls[0].SetIncline(new Incline(Incline.Orientation.N, 0), false);
walls[0].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[0].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[0].InitializeTemperature(25);
//壁表面の設定
iws = walls[0].GetSurface(true);
ews = walls[0].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//床を作成
walls[1] = new Wall(flwL);
walls[1].Name = "床";
walls[1].SurfaceArea = 48;
walls[1].SetIncline(new Incline(Incline.Orientation.N, Math.PI), false);
walls[1].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[1].SetFilmCoefficient(0.04, false);//外表面総合熱伝達率[W/(m2K)]//地面絶縁体
walls[1].InitializeTemperature(25);
//壁表面の設定
iws = walls[1].GetSurface(true);
ews = walls[1].GetSurface(false);
rooms[0].AddSurface(iws);
outdoor[0].AddGroundWallSurface(ews);
//北外壁を作成
walls[2] = new Wall(exwL);
walls[2].Name = "北外壁";
walls[2].SurfaceArea = 8 * 2.7;
walls[2].SetIncline(new Incline(Incline.Orientation.N, 0.5 * Math.PI), false);
walls[2].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[2].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[2].InitializeTemperature(25);
//壁表面の設定
iws = walls[2].GetSurface(true);
ews = walls[2].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//東外壁を作成
walls[3] = new Wall(exwL);
walls[3].Name = "東外壁";
if (hasEWWindow) walls[3].SurfaceArea = 6 * 2.7 - 6;
else walls[3].SurfaceArea = 6 * 2.7;
walls[3].SetIncline(new Incline(Incline.Orientation.E, 0.5 * Math.PI), false);
walls[3].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[3].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[3].InitializeTemperature(25);
//壁表面の設定
iws = walls[3].GetSurface(true);
ews = walls[3].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//西外壁を作成
walls[4] = new Wall(exwL);
walls[4].Name = "西外壁";
if (hasEWWindow) walls[4].SurfaceArea = 6 * 2.7 - 6;
else walls[4].SurfaceArea = 6 * 2.7;
walls[4].SetIncline(new Incline(Incline.Orientation.W, 0.5 * Math.PI), false);
walls[4].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[4].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[4].InitializeTemperature(25);
//壁表面の設定
iws = walls[4].GetSurface(true);
ews = walls[4].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//南外壁を作成
walls[5] = new Wall(exwL);
walls[5].Name = "南外壁";
if (noWindow || hasEWWindow) walls[5].SurfaceArea = 8 * 2.7;
else walls[5].SurfaceArea = 8 * 2.7 - 6d - 6d;
walls[5].SetIncline(new Incline(Incline.Orientation.S, 0.5 * Math.PI), false);
walls[5].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[5].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[5].InitializeTemperature(25);
//壁表面の設定
iws = walls[5].GetSurface(true);
ews = walls[5].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//窓を作成
if (!noWindow && !hasHighConcuctanceWall)
{
GlassPanes glassPane = new GlassPanes(0.74745, 0.043078, 1d / (1d / 333 + 1d / 333 + 1d / 6.297));
//glassPane.LongWaveEmissivity = extlwEmissivity;
//glassPane.ConvectiveRate = 3.16 / ai;
glassPane.AngularDependenceCoefficients = new double[] { 1.3930, 5.5401, -19.5736, 19.0379 };
Window window1 = new Window(glassPane);
Window window2 = new Window(glassPane);
//長波長吸収率・アルベド
WindowSurface ws;
ws = window1.GetSurface(true);
ws.LongWaveEmissivity = extlwEmissivity;
ws.FilmCoefficient = aowin;//表面総合熱伝達率[W/(m2K)]
ws.Albedo = 0.2;
ws = window2.GetSurface(true);
ws.LongWaveEmissivity = extlwEmissivity;
ws.FilmCoefficient = aowin;//表面総合熱伝達率[W/(m2K)]
ws.Albedo = 0.2;
//対流・放射成分
ws = window1.GetSurface(false);
ws.ConvectiveRate = 3.16 / ai;
ws.FilmCoefficient = ai;//表面総合熱伝達率[W/(m2K)]
ws = window2.GetSurface(false);
ws.ConvectiveRate = 3.16 / ai;
ws.FilmCoefficient = ai;//表面総合熱伝達率[W/(m2K)]
//窓面積
window1.SurfaceArea = 6;
window2.SurfaceArea = 6;
if (hasEWWindow)
{
window1.OutSideIncline = new Incline(Incline.Orientation.E, 0.5 * Math.PI);
window2.OutSideIncline = new Incline(Incline.Orientation.W, 0.5 * Math.PI);
if (hasSunShade)
{
window1.Shade = SunShade.MakeGridSunShade(3, 2, 1, 0, 0, 0, 0, window1.OutSideIncline);
window2.Shade = SunShade.MakeGridSunShade(3, 2, 1, 0, 0, 0, 0, window2.OutSideIncline);
}
}
else
{
window1.OutSideIncline = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
window2.OutSideIncline = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
if (hasSunShade)
{
window1.Shade = SunShade.MakeHorizontalSunShade(3, 2, 1, 4.5, 0.5, 0.5, window1.OutSideIncline);
window2.Shade = SunShade.MakeHorizontalSunShade(3, 2, 1, 0.5, 4.5, 0.5, window2.OutSideIncline);
}
}
//室と外界に追加
rooms[0].AddWindow(window1);
rooms[0].AddWindow(window2);
outdoor[0].AddWindow(window1);
outdoor[0].AddWindow(window2);
windows = new Window[] { window1, window2 };
}
else windows = new Window[0];
//HighConductanceWallを作成
if (hasHighConcuctanceWall)
{
walls[6] = new Wall(makeHighConductanceWall());
walls[6].SurfaceArea = 12;
walls[6].SetIncline(new Incline(Incline.Orientation.S, 0), false);
walls[6].SetFilmCoefficient(ai, true);
walls[6].SetFilmCoefficient(aowin, false);
walls[6].InitializeTemperature(25);
//壁表面の設定
iws = walls[6].GetSurface(true);
ews = walls[6].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
}
//短波長放射入射比率を設定
if (hasEWWindow)
{
if (isLowIntSWEmissivity)
{
rooms[0].SetShortWaveRadiationRate(walls[1].GetSurface(true), 0.642); //床面
rooms[0].SetShortWaveRadiationRate(walls[0].GetSurface(true), 0.168); //天井面
rooms[0].SetShortWaveRadiationRate(walls[3].GetSurface(true), 0.025); //東面
rooms[0].SetShortWaveRadiationRate(walls[4].GetSurface(true), 0.025); //西面
rooms[0].SetShortWaveRadiationRate(walls[2].GetSurface(true), 0.0525); //北面
rooms[0].SetShortWaveRadiationRate(walls[5].GetSurface(true), 0.0525); //南面
if (0 < windows.Length)
{
rooms[0].SetShortWaveRadiationRate(windows[0], 0.0175);
rooms[0].SetShortWaveRadiationRate(windows[1], 0.0175);
}
}
else
{
rooms[0].SetShortWaveRadiationRate(walls[1].GetSurface(true), 0.651); //床面
rooms[0].SetShortWaveRadiationRate(walls[0].GetSurface(true), 0.177); //天井面
rooms[0].SetShortWaveRadiationRate(walls[3].GetSurface(true), 0.027); //東面
rooms[0].SetShortWaveRadiationRate(walls[4].GetSurface(true), 0.027); //西面
rooms[0].SetShortWaveRadiationRate(walls[2].GetSurface(true), 0.056); //北面
rooms[0].SetShortWaveRadiationRate(walls[5].GetSurface(true), 0.056); //南面
if (0 < windows.Length)
{
rooms[0].SetShortWaveRadiationRate(windows[0], 0.003);
rooms[0].SetShortWaveRadiationRate(windows[1], 0.003);
}
}
}
else
{
if (isLowIntSWEmissivity)
{
rooms[0].SetShortWaveRadiationRate(walls[1].GetSurface(true), 0.244); //床面
rooms[0].SetShortWaveRadiationRate(walls[0].GetSurface(true), 0.192); //天井面
rooms[0].SetShortWaveRadiationRate(walls[3].GetSurface(true), 0.057); //東面
rooms[0].SetShortWaveRadiationRate(walls[4].GetSurface(true), 0.057); //西面
rooms[0].SetShortWaveRadiationRate(walls[2].GetSurface(true), 0.082); //北面
rooms[0].SetShortWaveRadiationRate(walls[5].GetSurface(true), 0.065); //南面
if (0 < windows.Length)
{
rooms[0].SetShortWaveRadiationRate(windows[0], 0.152);
rooms[0].SetShortWaveRadiationRate(windows[1], 0.152);
}
}
else if (isHighIntSWEmissivity)
{
rooms[0].SetShortWaveRadiationRate(walls[1].GetSurface(true), 0.651); //床面
rooms[0].SetShortWaveRadiationRate(walls[0].GetSurface(true), 0.177); //天井面
rooms[0].SetShortWaveRadiationRate(walls[3].GetSurface(true), 0.041); //東面
rooms[0].SetShortWaveRadiationRate(walls[4].GetSurface(true), 0.041); //西面
rooms[0].SetShortWaveRadiationRate(walls[2].GetSurface(true), 0.056); //北面
rooms[0].SetShortWaveRadiationRate(walls[5].GetSurface(true), 0.028); //南面
if (0 < windows.Length)
{
rooms[0].SetShortWaveRadiationRate(windows[0], 0.003);
rooms[0].SetShortWaveRadiationRate(windows[1], 0.003);
}
}
else
{
rooms[0].SetShortWaveRadiationRate(walls[1].GetSurface(true), 0.642); //床面
rooms[0].SetShortWaveRadiationRate(walls[0].GetSurface(true), 0.168); //天井面
rooms[0].SetShortWaveRadiationRate(walls[3].GetSurface(true), 0.038); //東面
rooms[0].SetShortWaveRadiationRate(walls[4].GetSurface(true), 0.038); //西面
rooms[0].SetShortWaveRadiationRate(walls[2].GetSurface(true), 0.053); //北面
rooms[0].SetShortWaveRadiationRate(walls[5].GetSurface(true), 0.026); //南面
if (0 < windows.Length)
{
rooms[0].SetShortWaveRadiationRate(windows[0], 0.026);
rooms[0].SetShortWaveRadiationRate(windows[1], 0.026);
}
}
}
//対流成分設定
rooms[0].SetConvectiveRate(3.16 / ai);
outdoor[0].SetConvectiveRate(24.67 / ao);
//HighConductanceWallの対流成分
if (hasHighConcuctanceWall)
{
ews = walls[6].GetSurface(false);
ews.ConvectiveRate = 16.37 / aowin;
}
}
/// <summary>Sample program calculating the unsteady heat conduction of wall with heating tube</summary>
private static void wallTest2()
{
WallLayers wl = new WallLayers();
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.FrexibleBoard), 0.0165));
wl.AddLayer(new WallLayers.Layer(new WallMaterial("Water", 0.59, 4186), 0.02));
wl.AddLayer(new WallLayers.Layer(new WallMaterial("Water", 0.59, 4186), 0.02));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.ExtrudedPolystyreneFoam_3), 0.02));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.Plywood), 0.009));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.AirGap), 0.015));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.Plywood), 0.009));
Wall wall = new Wall(wl);
wall.TimeStep = 300;
wall.AirTemperature1 = 20;
wall.AirTemperature2 = 10;
wall.SurfaceArea = 6.48;
Tube tube = new Tube(0.84, 0.346, 4186);
//installing tube to wall
wall.AddTube(tube, 1);
tube.SetFlowRate(0); //initial flow rate is 0 kg/s
tube.FluidTemperature = 30;
wall.InitializeTemperature(20); //initialize temperature of the wall
for (int i = 0; i < wall.Layers.LayerNumber; i++) Console.Write("temperature" + i + ", ");
Console.WriteLine("heat transfer to the tube[W], outlet temperature of fluid[C]");
for (int i = 0; i < 100; i++)
{
if (i == 50) tube.SetFlowRate(0.54); //start heating
wall.Update();
double[] tmp = wall.GetTemperatures();
for (int j = 0; j < tmp.Length - 1; j++) Console.Write(((tmp[j] + tmp[j + 1]) / 2d).ToString("F1") + ", ");
Console.Write(wall.GetHeatTransferToTube(1).ToString("F0") + ", " + tube.GetOutletFluidTemperature().ToString("F1"));
Console.WriteLine();
}
Console.Read();
}
/// <summary>多数室テスト</summary>
/// <remarks>
/// 東西2室で壁・窓表面の相互放射を考慮した計算を行う。
/// 東側は南北で2ゾーンに分割する。
/// 壁体は全て200mmのコンクリートとする。
/// 幅×奥行き×高さ = 8m×7m×3mとする。
/// 地面（床）は考慮しない。
///
/// N1 N2
/// -------------------------
/// | | |
/// | | znE1 | E1
/// | | |
/// W | znW |- - - - - -|
/// | | |
/// | | znE2 | E2
/// | | |
/// ----+++++----------------
/// S1 S2
///
/// </remarks>
private static void multiRoomTest()
{
const double TIME_STEP = 3600;
const double INIT_TEMP = 15;
const double H_GAIN = 0;
const int ITER_NUM = 100;
const double W_AI = 8;
const double E_AI = 9.3;
const double W_AO = 20;
const double E_AO = 23;
bool USE_TUBE = false;
//モデル作成処理*********************************************************
//屋外
Outdoor outDoor = new Outdoor();
Sun sun = new Sun(Sun.City.Tokyo);
sun.Update(new DateTime(2001, 1, 1, 0, 0, 0));
outDoor.Sun = sun;
//壁リスト
Wall[] walls = new Wall[12];
//ゾーンを作成
Zone znW = new Zone();
znW.Volume = 7 * 4 * 3;
znW.SensibleHeatCapacity = znW.Volume * 12000;//単位容積あたり12kJ
Zone znE1 = new Zone();
znE1.Volume = 3.5 * 4 * 3;
znE1.SensibleHeatCapacity = znE1.Volume * 12000;//単位容積あたり12kJ
Zone znE2 = new Zone();
znE2.Volume = 3.5 * 4 * 3;
znE2.SensibleHeatCapacity = znE2.Volume * 12000;//単位容積あたり12kJ
znW.TimeStep = znE1.TimeStep = znE2.TimeStep = TIME_STEP;
//壁構成を作成（コンクリート）
WallLayers layers;
WallLayers.Layer layer;
layers = new WallLayers();
layer = new WallLayers.Layer(new WallMaterial("コンクリート", 1.4, 1934), 0.150, 2);
layers.AddLayer(layer);
//西外壁
walls[0] = new Wall(layers);
walls[0].SurfaceArea = 7 * 3;
WallSurface ews = walls[0].GetSurface(true);
WallSurface iws = walls[0].GetSurface(false);
ews.FilmCoefficient = W_AO;
iws.FilmCoefficient = W_AI;
walls[0].SetIncline(new Incline(Incline.Orientation.W, 0.5 * Math.PI), true);
znW.AddSurface(iws);
outDoor.AddWallSurface(ews);
//東外壁1
walls[1] = new Wall(layers);
walls[1].SurfaceArea = 3.5 * 3;
ews = walls[1].GetSurface(true);
iws = walls[1].GetSurface(false);
ews.FilmCoefficient = E_AO;
iws.FilmCoefficient = E_AI;
walls[1].SetIncline(new Incline(Incline.Orientation.E, 0.5 * Math.PI), true);
znE1.AddSurface(iws);
outDoor.AddWallSurface(ews);
//東外壁2
walls[2] = new Wall(layers);
walls[2].SurfaceArea = 3.5 * 3;
ews = walls[2].GetSurface(true);
iws = walls[2].GetSurface(false);
ews.FilmCoefficient = E_AO;
iws.FilmCoefficient = E_AI;
walls[2].SetIncline(new Incline(Incline.Orientation.E, 0.5 * Math.PI), true);
znE2.AddSurface(iws);
outDoor.AddWallSurface(ews);
//北外壁1
walls[3] = new Wall(layers);
walls[3].SurfaceArea = 4 * 3;
ews = walls[3].GetSurface(true);
iws = walls[3].GetSurface(false);
ews.FilmCoefficient = W_AO;
iws.FilmCoefficient = W_AI;
walls[3].SetIncline(new Incline(Incline.Orientation.N, 0.5 * Math.PI), true);
znW.AddSurface(iws);
outDoor.AddWallSurface(ews);
//北外壁2
walls[4] = new Wall(layers);
walls[4].SurfaceArea = 4 * 3;
ews = walls[4].GetSurface(true);
iws = walls[4].GetSurface(false);
ews.FilmCoefficient = E_AO;
iws.FilmCoefficient = E_AI;
walls[4].SetIncline(new Incline(Incline.Orientation.N, 0.5 * Math.PI), true);
znE1.AddSurface(iws);
outDoor.AddWallSurface(ews);
//南外壁1
walls[5] = new Wall(layers);
walls[5].SurfaceArea = 4 * 3;
ews = walls[5].GetSurface(true);
iws = walls[5].GetSurface(false);
ews.FilmCoefficient = W_AO;
iws.FilmCoefficient = W_AI;
walls[5].SetIncline(new Incline(Incline.Orientation.S, 0.5 * Math.PI), true);
znW.AddSurface(iws);
outDoor.AddWallSurface(ews);
//南外壁2
walls[6] = new Wall(layers);
walls[6].SurfaceArea = 4 * 3;
ews = walls[6].GetSurface(true);
iws = walls[6].GetSurface(false);
ews.FilmCoefficient = E_AO;
iws.FilmCoefficient = E_AI;
walls[6].SetIncline(new Incline(Incline.Orientation.S, 0.5 * Math.PI), true);
znE2.AddSurface(iws);
outDoor.AddWallSurface(ews);
//屋根1
walls[7] = new Wall(layers);
walls[7].SurfaceArea = 4 * 7;
ews = walls[7].GetSurface(true);
iws = walls[7].GetSurface(false);
ews.FilmCoefficient = W_AO;
iws.FilmCoefficient = W_AI;
walls[7].SetIncline(new Incline(Incline.Orientation.N, 0), true);
znW.AddSurface(iws);
outDoor.AddWallSurface(ews);
//屋根2
walls[8] = new Wall(layers);
walls[8].SurfaceArea = 4 * 3.5;
ews = walls[8].GetSurface(true);
iws = walls[8].GetSurface(false);
ews.FilmCoefficient = E_AO;
iws.FilmCoefficient = E_AI;
walls[8].SetIncline(new Incline(Incline.Orientation.N, 0), true);
znE1.AddSurface(iws);
outDoor.AddWallSurface(ews);
//屋根3
walls[9] = new Wall(layers);
walls[9].SurfaceArea = 4 * 3.5;
ews = walls[9].GetSurface(true);
iws = walls[9].GetSurface(false);
ews.FilmCoefficient = E_AO;
iws.FilmCoefficient = E_AI;
walls[9].SetIncline(new Incline(Incline.Orientation.N, 0), true);
znE2.AddSurface(iws);
outDoor.AddWallSurface(ews);
//内壁1
walls[10] = new Wall(layers);
walls[10].SurfaceArea = 7 * 3.5;
ews = walls[10].GetSurface(true);
iws = walls[10].GetSurface(false);
ews.FilmCoefficient = E_AI;
iws.FilmCoefficient = W_AI;
znW.AddSurface(iws);
znE1.AddSurface(ews);
//内壁2
walls[11] = new Wall(layers);
walls[11].SurfaceArea = 7 * 3.5;
ews = walls[11].GetSurface(true);
iws = walls[11].GetSurface(false);
ews.FilmCoefficient = E_AI;
iws.FilmCoefficient = W_AI;
znW.AddSurface(iws);
znE2.AddSurface(ews);
//南窓
GlassPanes gPanes = new GlassPanes(new GlassPanes.Pane[] {
new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.TransparentGlass03mm),
new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.HeatAbsorbingGlass03mm)
});
//外側ブラインド
GlassPanes gPanesWithBlind = new GlassPanes(new GlassPanes.Pane[] {
new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.TransparentGlass03mm),
new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.HeatAbsorbingGlass03mm),
new GlassPanes.Pane(0.05, 0.35, 9999)
});
Window window = new Window(gPanes, new Incline(Incline.Orientation.S, 0.5 * Math.PI));
window.SurfaceArea = 1 * 3;
WindowSurface ws1 = window.GetSurface(true);
WindowSurface ws2 = window.GetSurface(false);
ws1.LongWaveEmissivity = 0.7;
ws1.FilmCoefficient = W_AO;
ws2.FilmCoefficient = W_AI;
znW.AddWindow(window);
outDoor.AddWindow(window);
/*//debug
for (int i = 0; i < walls.Length; i++)
{
walls[i].GetSurface(true).ConvectiveRate = 0;
walls[i].GetSurface(false).ConvectiveRate = 0;
}
//window.GetSurface(false).ConvectiveRate = 0;
//debug*/
//発熱体*****************************************************************
znW.AddHeatGain(new ConstantHeatGain(0, H_GAIN, 0));
//制御*******************************************************************
znE1.ControlDrybulbTemperature = false;
znE1.DrybulbTemperatureSetPoint = 20;
znE2.ControlDrybulbTemperature = false;
znE2.DrybulbTemperatureSetPoint = 20;
znW.ControlDrybulbTemperature = false;
znW.DrybulbTemperatureSetPoint = 20;
//外界条件設定***********************************************************
outDoor.AirState = new MoistAir(30, 0.020);
outDoor.SetWallSurfaceBoundaryState();
//天井に冷水配管を設置
if (USE_TUBE)
{
Tube tube = new Tube(0.999, 0.275, 4186);
tube.SetFlowRate(0.222);
tube.FluidTemperature = 10;
walls[7].AddTube(tube, 0);
walls[8].AddTube(tube, 0);
walls[9].AddTube(tube, 0);
}
//室温・壁温初期化*******************************************************
for (int i = 0; i < walls.Length; i++) walls[i].InitializeTemperature(INIT_TEMP);
znE1.InitializeAirState(INIT_TEMP, 0.015);
znE2.InitializeAirState(INIT_TEMP, 0.015);
znW.InitializeAirState(INIT_TEMP, 0.015);
//多数室オブジェクトを作成・初期化
Room[] rooms = new Room[2];
rooms[0] = new Room(new Zone[] { znW });
rooms[1] = new Room(new Zone[] { znE1, znE2 });
MultiRoom mRoom = new MultiRoom(rooms);
mRoom.SetTimeStep(TIME_STEP);
//初期化
mRoom.Initialize();
//室間換気設定***********************************************************
znW.VentilationVolume = znW.Volume * 0;
znE1.VentilationVolume = znE1.Volume * 0;
znE2.VentilationVolume = znE2.Volume * 0;
znW.VentilationAirState = outDoor.AirState;
znE1.VentilationAirState = outDoor.AirState;
znE2.VentilationAirState = outDoor.AirState;
//mRoom.SetAirFlow(znE1, znE2, 10);
//mRoom.SetAirFlow(znE2, znW, 10);
//mRoom.SetAirFlow(znW, znE1, 10);
//熱収支確認用変数*******************************************************
double heatTransferToExWall = 0;
double heatTransferToTube = 0;
double heatTransferToWindow = 0;
double oaLoad = 0;
//外気データ読み込み*****************************************************
StreamReader sReader = new StreamReader("BESTestWeather.csv");
sReader.ReadLine();
//室温更新テスト*********************************************************
for (int i = 0; i < ITER_NUM; i++)
{
//外気条件設定
string[] wData = sReader.ReadLine().Split(',');
outDoor.AirState = new MoistAir(double.Parse(wData[2]), double.Parse(wData[3]));
sun.DirectNormalRadiation = double.Parse(wData[4]);
sun.GlobalHorizontalRadiation = double.Parse(wData[5]);
sun.DiffuseHorizontalRadiation = double.Parse(wData[6]);
outDoor.NocturnalRadiation = double.Parse(wData[8]);
//12~13時は外側ブラインドを利用
if (sun.CurrentDateTime.Hour == 12 && sun.CurrentDateTime.Minute == 0) window.Initialize(gPanesWithBlind);
if (sun.CurrentDateTime.Hour == 13 && sun.CurrentDateTime.Minute == 0) window.Initialize(gPanes);
Console.WriteLine(
znW.CurrentDrybulbTemperature.ToString("F3").PadLeft(5) + " | "
+ znE1.CurrentDrybulbTemperature.ToString("F3").PadLeft(5) + " | "
+ znE2.CurrentDrybulbTemperature.ToString("F3").PadLeft(5) + " | "
+ znW.CurrentSensibleHeatLoad.ToString("F2").PadLeft(5) + " | "
+ znE1.CurrentSensibleHeatLoad.ToString("F2").PadLeft(5) + " | "
+ znE2.CurrentSensibleHeatLoad.ToString("F2").PadLeft(5) + " | "
+ walls[0].GetWallTemprature(true).ToString("F2").PadLeft(5) + " | "
+ walls[0].GetWallTemprature(false).ToString("F2").PadLeft(5) + " | "
);
//壁体状態更新
for (int j = 0; j < walls.Length; j++) walls[j].Update();
//外気条件を壁に設定
outDoor.SetWallSurfaceBoundaryState();
//室状態更新
mRoom.UpdateRoomTemperatures();
mRoom.UpdateRoomHumidities();
//壁体への熱移動量を積算
for (int j = 0; j < 10; j++) heatTransferToExWall += walls[j].GetHeatTransfer(true);
//窓面への熱移動量を積算
heatTransferToWindow += window.AbsorbedHeatGain + window.TransferHeatGain + window.TransmissionHeatGain;
heatTransferToWindow -= rooms[0].TransmissionHeatLossFromWindow + rooms[1].TransmissionHeatLossFromWindow;
//チューブへの熱移動量を積算
heatTransferToTube += walls[7].GetHeatTransferToTube(0) + walls[8].GetHeatTransferToTube(0) + walls[9].GetHeatTransferToTube(0);
//外気負荷を計算
Zone[] zns = new Zone[] { znE1, znE2, znW };
for (int j = 0; j < zns.Length; j++)
{
if (zns[j].VentilationVolume != 0)
{
double airDS = 1d / (MoistAir.GetAirStateFromDBHR(zns[j].CurrentDrybulbTemperature, zns[j].CurrentHumidityRatio, MoistAir.Property.SpecificVolume));
double cpAir = MoistAir.GetSpecificHeat(zns[j].CurrentHumidityRatio);
oaLoad += zns[j].VentilationVolume * airDS * cpAir * (zns[j].VentilationAirState.DryBulbTemperature - zns[j].CurrentDrybulbTemperature);
}
}
//日時更新
sun.Update(sun.CurrentDateTime.AddSeconds(TIME_STEP));
}
sReader.Close();
//熱収支を書き出し
//屋外から壁体への熱移動量[MJ]
heatTransferToExWall *= TIME_STEP / 1000000d;
//窓面への熱移動量[MJ]
heatTransferToWindow *= TIME_STEP / 1000000d;
//壁体からチューブへの熱移動量[MJ]
heatTransferToTube *= TIME_STEP / 1000000d;
//外気負荷[MJ]
oaLoad *= TIME_STEP / 1000000d / 3.6;
//壁体蓄熱量[MJ]
double wallHeatStorage = 0;
for (int i = 0; i < walls.Length; i++) wallHeatStorage += walls[i].GetHeatStorage(INIT_TEMP);
wallHeatStorage /= 1000d;
//室蓄熱量[MJ]
double zoneHeatStorage = (znE1.GetHeatStorage(INIT_TEMP) + znE2.GetHeatStorage(INIT_TEMP) + znW.GetHeatStorage(INIT_TEMP)) / 1000d;
//発熱量
double heatGain = (H_GAIN * TIME_STEP * ITER_NUM) / 1000000;
//書き出し
Console.WriteLine("壁体への熱移動[MJ] | 窓面への熱移動[MJ] | 壁体の蓄熱量[MJ] | 室の蓄熱量[MJ] | 発熱量[MJ] | チューブへの熱移動[MJ] | 外気負荷[MJ]");
Console.WriteLine(heatTransferToExWall.ToString("F2") + " | " + heatTransferToWindow.ToString("F2") + " | " +
wallHeatStorage.ToString("F2") + " | " + zoneHeatStorage.ToString("F2") + " | " + heatGain + " | " + heatTransferToTube.ToString("F2") + " | " + oaLoad.ToString("F2"));
Console.WriteLine("熱収支[MJ] = " + (heatTransferToExWall + heatTransferToWindow - heatTransferToTube - wallHeatStorage - zoneHeatStorage + heatGain + oaLoad));
Console.Read();
}
/// <summary>壁熱貫流テスト（潜熱蓄熱材）</summary>
private static void wallHeatTransferTest4()
{
WallLayers layers = new WallLayers();
WallLayers.Layer layer;
layer = new WallLayers.Layer(new WallMaterial("コンクリート", 1.4, 1934), 0.060);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("潜熱蓄熱材A", 1.4, 1934), 0.030);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("潜熱蓄熱材B", 1.4, 1934), 0.030);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("コンクリート", 1.4, 1934), 0.060);
layers.AddLayer(layer);
Wall wall = new Wall(layers);
LatentHeatStorageMaterial material = new LatentHeatStorageMaterial(11, new WallMaterial("潜熱蓄熱材A1", 1.4, 1934));
material.AddMaterial(12, new WallMaterial("潜熱蓄熱材A2", 1.4, 1934 * 40));
material.AddMaterial(100, new WallMaterial("潜熱蓄熱材A3", 1.4, 1934));
wall.SetLatentHeatStorageMaterial(1, material);
material = new LatentHeatStorageMaterial(13, new WallMaterial("潜熱蓄熱材B1", 1.4, 1934));
material.AddMaterial(14, new WallMaterial("潜熱蓄熱材B2", 1.4, 1934 * 40));
material.AddMaterial(100, new WallMaterial("潜熱蓄熱材B3", 1.4, 1934));
wall.SetLatentHeatStorageMaterial(2, material);
wall.AirTemperature1 = 20;
wall.AirTemperature2 = 10;
wall.SurfaceArea = 175;
wall.GetSurface(true).ConvectiveRate = 1;
wall.GetSurface(false).ConvectiveRate = 1;
wall.TimeStep = 3600;
StreamWriter sWriter = new StreamWriter("test.csv");
wall.InitializeTemperature(10);
Console.WriteLine("壁面温度[C]");
for (int kkk = 0; kkk < 4; kkk++)
{
if (kkk % 2 == 0) wall.AirTemperature1 = 20;
else wall.AirTemperature1 = 10;
for (int i = 0; i < 24; i++)
{
wall.Update();
double[] tmp = wall.GetTemperatures();
for (int j = 0; j < tmp.Length; j++) Console.Write(tmp[j].ToString("F2").PadLeft(5) + " | ");
Console.WriteLine();
for (int j = 0; j < tmp.Length; j++) sWriter.Write(tmp[j].ToString("F2").PadLeft(5) + " , ");
sWriter.WriteLine();
}
}
sWriter.Close();
Console.Read();
}
private static void makeExWalls(
Dictionary<string, Zone> zones, Dictionary<string, WallLayers> wallLayers,
Dictionary<string, Incline> inclines, Dictionary<string, Window> windows, Dictionary<string, Wall> frames
, Dictionary<string, Wall> doors, Outdoor outdoor, out Dictionary<string, Wall> exWalls)
{
exWalls = new Dictionary<string, Wall>();
Wall exWall;
exWall = new Wall(wallLayers["外壁"], "EW1-1");
exWall.SurfaceArea = 5.005 * 2.7 - windows["WI1-1"].SurfaceArea - windows["WI1-2"].SurfaceArea
- frames["SS1-1"].SurfaceArea - frames["SS1-2"].SurfaceArea;
exWall.SetIncline(inclines["S"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["1F居間"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW1-2");
exWall.SurfaceArea = 3.64 * 2.7 - windows["WI1-3"].SurfaceArea - frames["SS1-3"].SurfaceArea;
exWall.SetIncline(inclines["S"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["1F和室"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW1-3");
exWall.SurfaceArea = 1.82 * 2.7;
exWall.SetIncline(inclines["E"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["1F和室"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW1-4");
exWall.SurfaceArea = 1.82 * 2.7;
exWall.SetIncline(inclines["E"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["1F押入"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW1-5");
exWall.SurfaceArea = 1.82 * 2.7 - windows["WI1-4"].SurfaceArea - frames["SS1-4"].SurfaceArea;
exWall.SetIncline(inclines["E"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["1F浴室"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW1-6");
exWall.SurfaceArea = 1.82 * 2.7;
exWall.SetIncline(inclines["E"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["1F洗面所"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW1-7");
exWall.SurfaceArea = 2.73 * 2.7 - windows["WI1-5"].SurfaceArea - frames["SS1-5"].SurfaceArea;
exWall.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["1F洗面所"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW1-8");
exWall.SurfaceArea = 0.91 * 2.7 - windows["WI1-6"].SurfaceArea - frames["SS1-6"].SurfaceArea;
exWall.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["1FWC"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW1-9");
exWall.SurfaceArea = 0.91 * 2.7;
exWall.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["階段室"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW1-10");
exWall.SurfaceArea = 1.82 * 2.7 - doors["DR1-1"].SurfaceArea;
exWall.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["1F廊下"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW1-11");
exWall.SurfaceArea = 2.275 * 2.7 - doors["DR1-2"].SurfaceArea;
exWall.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["1F台所"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW1-12");
exWall.SurfaceArea = 3.185 * 2.7 - windows["WI1-7"].SurfaceArea - frames["SS1-7"].SurfaceArea;
exWall.SetIncline(inclines["W"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["1F台所"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW1-13");
exWall.SurfaceArea = 4.095 * 2.7 - windows["WI1-8"].SurfaceArea - windows["WI1-9"].SurfaceArea
- frames["SS1-8"].SurfaceArea - frames["SS1-9"].SurfaceArea;
exWall.SetIncline(inclines["W"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["1F居間"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW2-1");
exWall.SurfaceArea = 5.005 * 2.7 - windows["WI2-1"].SurfaceArea - windows["WI2-2"].SurfaceArea
- frames["SS2-1"].SurfaceArea - frames["SS2-2"].SurfaceArea;
exWall.SetIncline(inclines["S"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["2F主寝室"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW2-2");
exWall.SurfaceArea = 3.64 * 2.7 - windows["WI2-3"].SurfaceArea - frames["SS2-3"].SurfaceArea;
exWall.SetIncline(inclines["S"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["2F子供室1"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW2-3");
exWall.SurfaceArea = 2.73 * 2.7 - windows["WI2-4"].SurfaceArea - frames["SS2-4"].SurfaceArea;
exWall.SetIncline(inclines["E"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["2F子供室1"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW2-4");
exWall.SurfaceArea = 0.91 * 2.7;
exWall.SetIncline(inclines["E"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["2F押入3"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW2-5");
exWall.SurfaceArea = 3.64 * 2.7 - windows["WI2-5"].SurfaceArea - frames["SS2-5"].SurfaceArea;
exWall.SetIncline(inclines["E"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["2F子供室2"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW2-6");
exWall.SurfaceArea = 2.73 * 2.7 - windows["WI2-6"].SurfaceArea - frames["SS2-6"].SurfaceArea;
exWall.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["2F子供室2"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW2-7");
exWall.SurfaceArea = 1.82 * 2.7 - windows["WI2-7"].SurfaceArea - frames["SS2-7"].SurfaceArea;
exWall.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["階段室"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW2-8");
exWall.SurfaceArea = 0.91 * 2.7 - windows["WI2-8"].SurfaceArea - frames["SS2-8"].SurfaceArea;
exWall.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["2FWC"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW2-9");
exWall.SurfaceArea = 3.185 * 2.7 - windows["WI2-9"].SurfaceArea - frames["SS2-9"].SurfaceArea;
exWall.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["2F予備室"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW2-10");
exWall.SurfaceArea = 3.185 * 2.7;
exWall.SetIncline(inclines["W"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["2F予備室"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW2-11");
exWall.SurfaceArea = 0.91 * 2.7;
exWall.SetIncline(inclines["W"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["2F押入1"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["外壁"], "EW2-12");
exWall.SurfaceArea = 3.185 * 2.7;
exWall.SetIncline(inclines["W"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["2F主寝室"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
exWall = new Wall(wallLayers["屋根1"], "EW-RF");
exWall.SurfaceArea = 8.645 * 7.280;
exWall.SetIncline(inclines["H"], true);
outdoor.AddWallSurface(exWall.GetSurface(true));
zones["屋根裏"].AddSurface(exWall.GetSurface(false));
exWalls.Add(exWall.Name, exWall);
//総合熱伝達率設定
foreach (string key in exWalls.Keys)
{
exWalls[key].GetSurface(true).FilmCoefficient = AO;
exWalls[key].GetSurface(false).FilmCoefficient = AI;
exWalls[key].TimeStep = TIME_STEP;
}
exWall = new Wall(wallLayers["地面"], "EW-SOIL");
exWall.SurfaceArea = 8.645 * 7.280;
outdoor.AddGroundWallSurface(exWall.GetSurface(true));
zones["床下"].AddSurface(exWall.GetSurface(false));
exWall.TimeStep = TIME_STEP;
exWalls.Add(exWall.Name, exWall);
}
private static void makeDoors(
Dictionary<string, Zone> zones, Dictionary<string, WallLayers> wallLayers,
Dictionary<string, Incline> inclines, Outdoor outdoor, out Dictionary<string, Wall> doors)
{
doors = new Dictionary<string, Wall>();
Wall door;
door = new Wall(wallLayers["外部ドア"], "DR1-1");
door.SurfaceArea = 1.0 * 2.0;
door.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(door.GetSurface(true));
zones["1F廊下"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["外部ドア"], "DR1-2");
door.SurfaceArea = 0.8 * 2.0;
door.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(door.GetSurface(true));
zones["1F台所"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR1-3");
door.SurfaceArea = 0.8 * 2.0;
zones["1F浴室"].AddSurface(door.GetSurface(true));
zones["1F洗面所"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR1-4");
door.SurfaceArea = 0.8 * 2.0;
zones["1F廊下"].AddSurface(door.GetSurface(true));
zones["1F洗面所"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR1-5");
door.SurfaceArea = 0.8 * 2.0;
zones["1F廊下"].AddSurface(door.GetSurface(true));
zones["1FWC"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR1-6");
door.SurfaceArea = 0.8 * 2.0;
zones["1F居間"].AddSurface(door.GetSurface(true));
zones["1F廊下"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR1-7");
door.SurfaceArea = 0.8 * 2.0;
zones["1F和室"].AddSurface(door.GetSurface(true));
zones["1F廊下"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR1-8");
door.SurfaceArea = 0.8 * 2.0;
zones["1F台所"].AddSurface(door.GetSurface(true));
zones["1F廊下"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR1-9");
door.SurfaceArea = 1.7 * 2.0;
zones["1F和室"].AddSurface(door.GetSurface(true));
zones["1F押入"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR2-1");
door.SurfaceArea = 1.7 * 2.0 * 2;
zones["2F主寝室"].AddSurface(door.GetSurface(true));
zones["2F押入1"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR2-2");
door.SurfaceArea = 0.8 * 2.0;
zones["2F主寝室"].AddSurface(door.GetSurface(true));
zones["2F廊下"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR2-3");
door.SurfaceArea = 0.8 * 2.0;
zones["2F子供室1"].AddSurface(door.GetSurface(true));
zones["2F押入2"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR2-4");
door.SurfaceArea = 1.7 * 2.0;
zones["2F子供室2"].AddSurface(door.GetSurface(true));
zones["2F押入3"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR2-5");
door.SurfaceArea = 0.8 * 2.0;
zones["2F子供室2"].AddSurface(door.GetSurface(true));
zones["2F廊下"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR2-6");
door.SurfaceArea = 0.8 * 2.0;
zones["2F予備室"].AddSurface(door.GetSurface(true));
zones["2F廊下"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR2-7");
door.SurfaceArea = 0.8 * 2.0;
zones["2FWC"].AddSurface(door.GetSurface(true));
zones["2F廊下"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
door = new Wall(wallLayers["室内ドア"], "DR2-8");
door.SurfaceArea = 0.8 * 2.0;
zones["2F子供室1"].AddSurface(door.GetSurface(true));
zones["2F廊下"].AddSurface(door.GetSurface(false));
doors.Add(door.Name, door);
//総合熱伝達率設定
foreach (string key in doors.Keys)
{
doors[key].GetSurface(true).FilmCoefficient = AI;
doors[key].GetSurface(false).FilmCoefficient = AI;
doors[key].TimeStep = TIME_STEP;
}
//外部ドア
doors["DR1-1"].GetSurface(true).FilmCoefficient = AO;
doors["DR1-2"].GetSurface(true).FilmCoefficient = AO;
}
private static void makeWindows(
Dictionary<string, Zone> zones,Dictionary<string, Incline> inclines, Outdoor outdoor, Dictionary<string, WallLayers> wallLayers,
out Dictionary<string, Window> windows, out Dictionary<string, Wall> frames)
{
bool makeWindowFrame = true;
const double WIN1720 = 2.89;//1.7 * 2.0; //
const double WIN1712 = 1.64;//1.7 * 1.2; //
const double WIN0512 = 0.42;//0.5 * 1.2; //
const double WIN1745 = 0.45;//1.7 * 0.45; //
//外側Low-e 6mm, 内側フロート 6mm
GlassPanes.Pane[] panes = new GlassPanes.Pane[2];
panes[0] = new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.TransparentGlass06mm);
panes[1] = new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.HeatReflectingGlass06mm);
GlassPanes gPanes = new GlassPanes(panes);
gPanes.SetHeatTransferCoefficientsOfGaps(0, 5.9);
windows = new Dictionary<string, Window>();
Window win;
frames = new Dictionary<string, Wall>();
Wall frm;
win = new Window(gPanes, "WI1-1");
win.SurfaceArea = WIN1720;
win.OutSideIncline = inclines["S"];
zones["1F居間"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS1-1");
frm.SurfaceArea = Math.Max(1.7 * 2.0 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["S"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["1F居間"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI1-2");
win.SurfaceArea = WIN1720;
win.OutSideIncline = inclines["S"];
zones["1F居間"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS1-2");
frm.SurfaceArea = Math.Max(1.7 * 2.0 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["S"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["1F居間"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI1-3");
win.SurfaceArea = WIN1720;
win.OutSideIncline = inclines["S"];
zones["1F和室"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS1-3");
frm.SurfaceArea = Math.Max(1.7 * 2.0 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["S"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["1F和室"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI1-4");
win.SurfaceArea = WIN0512;
win.OutSideIncline = inclines["E"];
zones["1F浴室"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS1-4");
frm.SurfaceArea = Math.Max(0.5 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["E"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["1F浴室"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI1-5");
win.SurfaceArea = WIN0512;
win.OutSideIncline = inclines["N"];
zones["1F洗面所"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS1-5");
frm.SurfaceArea = Math.Max(0.5 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["1F洗面所"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI1-6");
win.SurfaceArea = WIN0512;
win.OutSideIncline = inclines["N"];
zones["1FWC"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS1-6");
frm.SurfaceArea = Math.Max(0.5 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["1FWC"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI1-7");
win.SurfaceArea = WIN1745;
win.OutSideIncline = inclines["W"];
zones["1F台所"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS1-7");
frm.SurfaceArea = Math.Max(1.7 * 0.45 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["W"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["1F台所"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI1-8");
win.SurfaceArea = WIN0512;
win.OutSideIncline = inclines["W"];
zones["1F居間"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS1-8");
frm.SurfaceArea = Math.Max(0.5 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["W"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["1F居間"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI1-9");
win.SurfaceArea = WIN0512;
win.OutSideIncline = inclines["W"];
zones["1F居間"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS1-9");
frm.SurfaceArea = Math.Max(0.5 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["W"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["1F居間"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI2-1");
win.SurfaceArea = WIN1712;
win.OutSideIncline = inclines["S"];
zones["2F主寝室"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS2-1");
frm.SurfaceArea = Math.Max(1.7 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["S"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["2F主寝室"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI2-2");
win.SurfaceArea = WIN1712;
win.OutSideIncline = inclines["S"];
zones["2F主寝室"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS2-2");
frm.SurfaceArea = Math.Max(1.7 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["S"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["2F主寝室"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI2-3");
win.SurfaceArea = WIN1712;
win.OutSideIncline = inclines["S"];
zones["2F子供室1"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS2-3");
frm.SurfaceArea = Math.Max(1.7 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["S"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["2F子供室1"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI2-4");
win.SurfaceArea = WIN0512;
win.OutSideIncline = inclines["E"];
zones["2F子供室1"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS2-4");
frm.SurfaceArea = Math.Max(0.5 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["E"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["2F子供室1"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI2-5");
win.SurfaceArea = WIN0512;
win.OutSideIncline = inclines["E"];
zones["2F子供室2"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS2-5");
frm.SurfaceArea = Math.Max(0.5 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["E"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["2F子供室2"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI2-6");
win.SurfaceArea = WIN1712;
win.OutSideIncline = inclines["N"];
zones["2F子供室2"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS2-6");
frm.SurfaceArea = Math.Max(1.7 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["2F子供室2"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI2-7");
win.SurfaceArea = WIN0512;
win.OutSideIncline = inclines["N"];
zones["階段室"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS2-7");
frm.SurfaceArea = Math.Max(0.5 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["階段室"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI2-8");
win.SurfaceArea = WIN0512;
win.OutSideIncline = inclines["N"];
zones["2FWC"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS2-8");
frm.SurfaceArea = Math.Max(0.5 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["2FWC"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI2-9");
win.SurfaceArea = WIN1712;
win.OutSideIncline = inclines["N"];
zones["2F予備室"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS2-9");
frm.SurfaceArea = Math.Max(1.7 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["N"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["2F予備室"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
win = new Window(gPanes, "WI2-10");
win.SurfaceArea = WIN0512;
win.OutSideIncline = inclines["E"];
zones["2F主寝室"].AddWindow(win);
outdoor.AddWindow(win);
windows.Add(win.Name, win);
frm = new Wall(wallLayers["サッシ"], "SS2-10");
frm.SurfaceArea = Math.Max(0.5 * 1.2 - win.SurfaceArea, 0.0001);
frm.SetIncline(inclines["E"], true);
outdoor.AddWallSurface(frm.GetSurface(true));
zones["2F主寝室"].AddSurface(frm.GetSurface(false));
frames.Add(frm.Name, frm);
//総合熱伝達率設定
foreach (string key in windows.Keys)
{
windows[key].GetSurface(true).FilmCoefficient = AO;
windows[key].GetSurface(false).FilmCoefficient = AI;
}
//総合熱伝達率設定
foreach (string key in frames.Keys)
{
frames[key].GetSurface(true).FilmCoefficient = AO;
frames[key].GetSurface(false).FilmCoefficient = AI;
if (! makeWindowFrame) frames[key].SurfaceArea = 0.000001;
}
}
/// <summary>Sample program calculating the air state and heat load of the building (MultiRoom class)</summary>
private static void AirStateAndHeatLoadTest2()
{
//A sample weather data
//Drybulb temperature [C]
double[] dbt = new double[] { 24.2, 24.1, 24.1, 24.2, 24.3, 24.2, 24.4, 25.1, 26.1, 27.1, 28.8, 29.9,
30.7, 31.2, 31.6, 31.4, 31.3, 30.8, 29.4, 28.1, 27.5, 27.1, 26.6, 26.3 };
//Humidity ratio [kg/kg(DA)]
double[] hum = new double[] { 0.0134, 0.0136, 0.0134, 0.0133, 0.0131, 0.0134, 0.0138, 0.0142, 0.0142, 0.0140, 0.0147, 0.0149,
0.0142, 0.0146, 0.0140, 0.0145, 0.0144, 0.0146, 0.0142, 0.0136, 0.0136, 0.0135, 0.0136, 0.0140 };
//Nocturnal radiation [W/m2]
double[] nrd = new double[] { 32, 30, 30, 29, 26, 24, 24, 25, 25, 25, 24, 24, 24, 23, 24, 24, 24, 24, 23, 23, 24, 26, 25, 23 };
//Direct normal radiation [W/m2]
double[] dnr = new double[] { 0, 0, 0, 0, 0, 0, 106, 185, 202, 369, 427, 499, 557, 522, 517, 480, 398, 255, 142, 2, 0, 0, 0, 0 };
//Diffuse horizontal radiation [W/m2]
double[] drd = new double[] { 0, 0, 0, 0, 0, 0, 36, 115, 198, 259, 314, 340, 340, 349, 319, 277, 228, 167, 87, 16, 0, 0, 0, 0 };
//Create an instance of the Outdoor class
Outdoor outdoor = new Outdoor();
Sun sun = new Sun(Sun.City.Tokyo); //Located in Tokyo
outdoor.Sun = sun;
outdoor.GroundTemperature = 25; //Ground temperature is assumed to be constant
//Create an instance of the Incline class
Incline nIn = new Incline(Incline.Orientation.N, 0.5 * Math.PI); //North, Vertical
Incline eIn = new Incline(Incline.Orientation.E, 0.5 * Math.PI); //East, Vertical
Incline wIn = new Incline(Incline.Orientation.W, 0.5 * Math.PI); //West, Vertical
Incline sIn = new Incline(Incline.Orientation.S, 0.5 * Math.PI); //South, Vertical
Incline hIn = new Incline(Incline.Orientation.S, 0); //Horizontal
//Create an instance of the Zone class
Zone[] zones = new Zone[4];
Zone wpZone = zones[0] = new Zone("West perimeter zone");
wpZone.Volume = 3 * 5 * 3; //Ceiling height is 3m
Zone wiZone = zones[1] = new Zone("West interior zone");
wiZone.Volume = 4 * 5 * 3;
Zone epZone = zones[2] = new Zone("East perimeter zone");
epZone.Volume = 3 * 5 * 3;
Zone eiZone = zones[3] = new Zone("East interior zone");
eiZone.Volume = 4 * 5 * 3;
foreach (Zone zn in zones)
{
zn.VentilationVolume = 10; //Ventilation volume[CMH]
zn.TimeStep = 3600;
zn.DrybulbTemperatureSetPoint = 26;
zn.HumidityRatioSetPoint = 0.01;
}
//Set a heat production element to the east interior zone
//Convective sensible heat=100W, Radiative sensible heat=100W, Latent heat=20W
eiZone.AddHeatGain(new ConstantHeatGain(100, 100, 20));
//Create an instance of the WallLayers class : Concrete,400mm
WallLayers wl = new WallLayers();
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.ReinforcedConcrete), 0.4));
//Create an instance of the GlassPanes class:Low-emissivity coating single glass
GlassPanes gPanes = new GlassPanes(new GlassPanes.Pane(GlassPanes.Pane.PredifinedGlassPane.HeatReflectingGlass06mm));
//Set wall surfaces to the zone objects
Wall[] walls = new Wall[18];
List<WallSurface> outdoorSurfaces = new List<WallSurface>();
Wall wpwWall = walls[0] = new Wall(wl, "West wall in the west perimeter zone");
wpwWall.SurfaceArea = 3 * 3;
outdoorSurfaces.Add(wpwWall.GetSurface(true));
wpZone.AddSurface(wpwWall.GetSurface(false));
wpwWall.SetIncline(wIn, true);
Wall wpcWall = walls[1] = new Wall(wl, "Ceiling in the west perimeter zone");
wpcWall.SurfaceArea = 3 * 5;
outdoorSurfaces.Add(wpcWall.GetSurface(true));
wpZone.AddSurface(wpcWall.GetSurface(false));
wpcWall.SetIncline(hIn, true);
Wall wpfWall = walls[2] = new Wall(wl, "Floor in the west perimeter zone");
wpfWall.SurfaceArea = 3 * 5;
outdoor.AddGroundWallSurface(wpfWall.GetSurface(true));
wpZone.AddSurface(wpfWall.GetSurface(false));
Wall winWall = walls[3] = new Wall(wl, "North wall in the west interior zone");
winWall.SurfaceArea = 3 * 5;
outdoorSurfaces.Add(winWall.GetSurface(true));
wiZone.AddSurface(winWall.GetSurface(false));
winWall.SetIncline(nIn, true);
Wall wiwWall = walls[4] = new Wall(wl, "West wall in the west interior zone");
wiwWall.SurfaceArea = 3 * 4;
outdoorSurfaces.Add(wiwWall.GetSurface(true));
wiZone.AddSurface(wiwWall.GetSurface(false));
wiwWall.SetIncline(wIn, true);
Wall wicWall = walls[5] = new Wall(wl, "Ceiling in the west interior zone");
wicWall.SurfaceArea = 4 * 5;
outdoorSurfaces.Add(wicWall.GetSurface(true));
wiZone.AddSurface(wicWall.GetSurface(false));
wicWall.SetIncline(hIn, true);
Wall wifWall = walls[6] = new Wall(wl, "Floor in the west interior zone");
wifWall.SurfaceArea = 4 * 5;
outdoor.AddGroundWallSurface(wifWall.GetSurface(true));
wiZone.AddSurface(wifWall.GetSurface(false));
Wall epwWall = walls[7] = new Wall(wl, "East wall in the east perimeter zone");
epwWall.SurfaceArea = 3 * 3;
outdoorSurfaces.Add(epwWall.GetSurface(true));
epZone.AddSurface(epwWall.GetSurface(false));
epwWall.SetIncline(eIn, true);
Wall epcWall = walls[8] = new Wall(wl, "Ceiling in the east perimeter zone");
epcWall.SurfaceArea = 3 * 5;
outdoorSurfaces.Add(epcWall.GetSurface(true));
epZone.AddSurface(epcWall.GetSurface(false));
epcWall.SetIncline(hIn, true);
Wall epfWall = walls[9] = new Wall(wl, "Floor in the east perimeter zone");
epfWall.SurfaceArea = 3 * 5;
outdoor.AddGroundWallSurface(epfWall.GetSurface(true));
epZone.AddSurface(epfWall.GetSurface(false));
Wall einWall = walls[10] = new Wall(wl, "North wall in the east interior zone");
einWall.SurfaceArea = 5 * 3;
outdoorSurfaces.Add(einWall.GetSurface(true));
eiZone.AddSurface(einWall.GetSurface(false));
einWall.SetIncline(nIn, true);
Wall eiwWall = walls[11] = new Wall(wl, "East wall in the east interior zone");
eiwWall.SurfaceArea = 4 * 3;
outdoorSurfaces.Add(eiwWall.GetSurface(true));
eiZone.AddSurface(eiwWall.GetSurface(false));
eiwWall.SetIncline(eIn, true);
Wall eicWall = walls[12] = new Wall(wl, "Ceiling in the east interior zone");
eicWall.SurfaceArea = 4 * 5;
outdoorSurfaces.Add(eicWall.GetSurface(true));
eiZone.AddSurface(eicWall.GetSurface(false));
eicWall.SetIncline(hIn, true);
Wall eifWall = walls[13] = new Wall(wl, "Floor in the east interior zone");
eifWall.SurfaceArea = 4 * 5;
outdoor.AddGroundWallSurface(eifWall.GetSurface(true));
eiZone.AddSurface(eifWall.GetSurface(false));
Wall cpWall = walls[14] = new Wall(wl, "Inner wall at perimeter");
cpWall.SurfaceArea = 3 * 3;
wpZone.AddSurface(cpWall.GetSurface(true));
epZone.AddSurface(cpWall.GetSurface(false));
Wall ciWall = walls[15] = new Wall(wl, "Inner wall at interior");
ciWall.SurfaceArea = 4 * 3;
wiZone.AddSurface(ciWall.GetSurface(true));
eiZone.AddSurface(ciWall.GetSurface(false));
Wall wpsWall = walls[16] = new Wall(wl, "South wall in the west perimeter zone");
wpsWall.SurfaceArea = 5 * 3 - 3 * 2; //Reduce window surface area
outdoorSurfaces.Add(wpsWall.GetSurface(true));
wpZone.AddSurface(wpsWall.GetSurface(false));
wpsWall.SetIncline(sIn, true);
Wall epsWall = walls[17] = new Wall(wl, "South wall in the east perimeter zone");
epsWall.SurfaceArea = 5 * 3 - 3 * 2; //Reduce window surface area
outdoorSurfaces.Add(epsWall.GetSurface(true));
epZone.AddSurface(epsWall.GetSurface(false));
epsWall.SetIncline(sIn, true);
//Initialize outdoor surfaces
foreach (WallSurface ws in outdoorSurfaces)
{
//Add wall surfaces to Outdoor object
outdoor.AddWallSurface(ws);
//Initialize emissivity of surface
ws.InitializeEmissivity(WallSurface.SurfaceMaterial.Concrete);
}
//Add windows to the west zone
Window wWind = new Window(gPanes, "Window in the west perimeter zone");
wWind.SurfaceArea = 3 * 2;
wpZone.AddWindow(wWind);
outdoor.AddWindow(wWind);
//Add windows to the east zone
Window eWind = new Window(gPanes, "Window in the east perimeter zone");
eWind.SurfaceArea = 3 * 2;
//Set horizontal sun shade.
eWind.Shade = SunShade.MakeHorizontalSunShade(3, 2, 1, 1, 1, 0.5, sIn);
wpZone.AddWindow(eWind);
outdoor.AddWindow(eWind);
//Creat an insances of the Room class and MultiRoom class
Room eRm = new Room(new Zone[] { epZone, eiZone }); //East room
Room wRm = new Room(new Zone[] { wpZone, wiZone }); //Weast room
MultiRoom mRoom = new MultiRoom(new Room[] { eRm, wRm }); //Multi room (east and west rooms)
mRoom.SetTimeStep(3600);
//Set ventilation volume
wpZone.VentilationVolume = 10; //Only west perimeter zone has outdoor air ventilation
mRoom.SetAirFlow(wpZone, wiZone, 10);
mRoom.SetAirFlow(epZone, eiZone, 10);
mRoom.SetAirFlow(eiZone, epZone, 10);
//Set short wave radiation distribution:60% of short wave is distributed to perimeter floor.
double sfSum = 0;
foreach (ISurface isf in eRm.GetSurface()) sfSum += isf.Area;
sfSum -= epfWall.SurfaceArea;
foreach (ISurface isf in eRm.GetSurface()) eRm.SetShortWaveRadiationRate(isf, isf.Area / sfSum * 0.4);
eRm.SetShortWaveRadiationRate(epfWall.GetSurface(false), 0.6);
sfSum = 0;
foreach (ISurface isf in wRm.GetSurface()) sfSum += isf.Area;
sfSum -= wpfWall.SurfaceArea;
foreach (ISurface isf in wRm.GetSurface()) wRm.SetShortWaveRadiationRate(isf, isf.Area / sfSum * 0.4);
wRm.SetShortWaveRadiationRate(wpfWall.GetSurface(false), 0.6);
//Output title wrine to standard output stream
StreamWriter sWriter = new StreamWriter("AirStateAndHeatLoadTest2.csv");
foreach (Zone zn in zones) sWriter.Write(zn.Name + "Drybulb temperature[C], " + zn.Name +
"Humidity ratio[kg/kgDA], " + zn.Name + "Sensible heat load[W], " + zn.Name + "Latent heat load[W], ");
sWriter.WriteLine();
//Update the state (Iterate 100 times to make state steady)
for (int i = 0; i < 100; i++)
{
DateTime dTime = new DateTime(2007, 8, 3, 0, 0, 0);
for (int j = 0; j < 24; j++)
{
//Set date and time to Sun and Zone object.
sun.Update(dTime);
mRoom.SetCurrentDateTime(dTime);
//Operate HVAC system (8:00~19:00)
bool operating = (8 <= dTime.Hour && dTime.Hour <= 19);
foreach (Zone zn in zones)
{
zn.ControlHumidityRatio = operating;
zn.ControlDrybulbTemperature = operating;
}
//Set weather state.
outdoor.AirState = new MoistAir(dbt[j], hum[j]);
outdoor.NocturnalRadiation = nrd[j];
sun.SetGlobalHorizontalRadiation(drd[j], dnr[j]);
//Set ventilation air state.
wpZone.VentilationAirState = outdoor.AirState;
//Update boundary state of outdoor facing surfaces.
outdoor.SetWallSurfaceBoundaryState();
//Update the walls.
foreach (Wall wal in walls) wal.Update();
//Update the MultiRoom object.
mRoom.UpdateRoomTemperatures();
mRoom.UpdateRoomHumidities();
//Update date and time
dTime = dTime.AddHours(1);
//If it is last iteration, output result to CSV text.
if (i == 99)
{
foreach (Zone zn in zones)
{
sWriter.Write(zn.CurrentDrybulbTemperature.ToString("F1") + ", " + zn.CurrentHumidityRatio.ToString("F3") + ", " +
zn.CurrentSensibleHeatLoad.ToString("F0") + ", " + zn.CurrentLatentHeatLoad.ToString("F0") + ", ");
}
sWriter.WriteLine();
}
}
}
sWriter.Close();
}
/// <summary>Sample program calculating the unsteady heat conduction of wall with latent heat storage material</summary>
private static void wallTest3()
{
//Initial temperature
const double INIT_TEMP = 35;
//Create an instance of WallLayers class
WallLayers wl = new WallLayers();
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.FrexibleBoard), 0.0165));
wl.AddLayer(new WallLayers.Layer(new WallMaterial("dummy", 1, 1), 0.02));
wl.AddLayer(new WallLayers.Layer(new WallMaterial("dummy", 1, 1), 0.02));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.ExtrudedPolystyreneFoam_3), 0.02));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.Plywood), 0.009));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.AirGap), 0.015));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.Plywood), 0.009));
//Create an instance of Wall class
Wall wall = new Wall(wl);
wall.TimeStep = 1200;
wall.AirTemperature1 = 20;
wall.AirTemperature2 = 20;
wall.SurfaceArea = 6.48;
//Create an instance of LatentHeatStorageMaterial class
LatentHeatStorageMaterial pmc1;
pmc1 = new LatentHeatStorageMaterial(19, new WallMaterial("PCM1 (Solid)", 0.19, 3.6 * 1400));
pmc1.AddMaterial(23, new WallMaterial("PCM1 (Two phase)", (0.19 + 0.22) / 2d, 15.1 * 1400));
pmc1.AddMaterial(100, new WallMaterial("PCM1 (Liquid)", 0.22, 3.6 * 1400));
pmc1.Initialize(INIT_TEMP);
//Set PCM to second wall layer
wall.SetLatentHeatStorageMaterial(1, pmc1);
//Create an instance of LatentHeatStorageMaterial class
LatentHeatStorageMaterial pcm2;
pcm2 = new LatentHeatStorageMaterial(30, new WallMaterial("PCM2 (Solid)", 0.19, 3.6 * 1390));
pcm2.AddMaterial(32, new WallMaterial("PCM2 (Two phase)", (0.19 + 0.22) / 2d, 63.25 * 1400));
pcm2.AddMaterial(100, new WallMaterial("PCM2 (Liquid)", 0.22, 3.5 * 1410));
pcm2.Initialize(INIT_TEMP);
//Set PCM to third wall layer
wall.SetLatentHeatStorageMaterial(2, pcm2);
//Install heating tube between PMCs
Tube tube = new Tube(0.84, 0.346, 4186);
wall.AddTube(tube, 1);
tube.SetFlowRate(0);
tube.FluidTemperature = 40;
//Initialize wall temperature
wall.InitializeTemperature(INIT_TEMP);
for (int i = 0; i < wall.Layers.LayerNumber; i++) Console.Write("Temperature" + i + ", ");
Console.WriteLine("Heat storage[kJ]");
for (int i = 0; i < 200; i++)
{
if (i == 100)
{
tube.SetFlowRate(0.54); //Start heating
wall.AirTemperature1 = 30;
wall.AirTemperature2 = 30;
}
wall.Update();
double[] tmp = wall.GetTemperatures();
for (int j = 0; j < tmp.Length - 1; j++) Console.Write(((tmp[j] + tmp[j + 1]) / 2d).ToString("F1") + ", ");
Console.Write(wall.GetHeatStorage(INIT_TEMP).ToString("F0"));
Console.WriteLine();
}
Console.Read();
}
/// <summary>壁熱貫流テスト（冷温水配管埋設）</summary>
private static void wallHeatTransferTest2()
{
WallLayers wl = new WallLayers();
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.FrexibleBoard), 0.0165));
wl.AddLayer(new WallLayers.Layer(new WallMaterial("水", 0.59, 4186), 0.02));
wl.AddLayer(new WallLayers.Layer(new WallMaterial("水", 0.59, 4186), 0.02));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.ExtrudedPolystyreneFoam_3), 0.02));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.Plywood), 0.009));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.AirGap), 0.015));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.Plywood), 0.009));
Wall wall = new Wall(wl);
wall.TimeStep = 300;
wall.AirTemperature1 = 20;
wall.AirTemperature2 = 10;
wall.SurfaceArea = 6.48;
//配管を埋設
Tube tube = new Tube(0.84, 0.346, 4186);
wall.AddTube(tube, 1);
tube.SetFlowRate(0); //最初は流量0
tube.FluidTemperature = 30;
wall.InitializeTemperature(20); //壁体温度を初期化
for (int i = 0; i < wall.Layers.LayerNumber; i++) Console.Write("温度" + i + ", ");
Console.WriteLine("配管への熱移動量[W], 配管出口温度[C]");
for (int i = 0; i < 100; i++)
{
if (i == 50) tube.SetFlowRate(0.54); //通水開始
wall.Update();
double[] tmp = wall.GetTemperatures();
for (int j = 0; j < tmp.Length - 1; j++) Console.Write(((tmp[j] + tmp[j + 1]) / 2d).ToString("F1") + ", ");
Console.Write(wall.GetHeatTransferToTube(1).ToString("F0") + ", " + tube.GetOutletFluidTemperature().ToString("F1"));
Console.WriteLine();
}
Console.Read();
}
private static void makeFloors(Dictionary<string, Zone> zones,
Dictionary<string, WallLayers> wallLayers, out Dictionary<string, Wall> floors)
{
floors = new Dictionary<string, Wall>();
Wall floor;
floor = new Wall(wallLayers["屋根2"], "CE-1");
floor.SurfaceArea = 17.4;
zones["屋根裏"].AddSurface(floor.GetSurface(true));
zones["2F主寝室"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["屋根2"], "CE-2");
floor.SurfaceArea = 10.7;
zones["屋根裏"].AddSurface(floor.GetSurface(true));
zones["2F子供室1"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["屋根2"], "CE-3");
floor.SurfaceArea = 10.1;
zones["屋根裏"].AddSurface(floor.GetSurface(true));
zones["2F予備室"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["屋根2"], "CE-4");
floor.SurfaceArea = 9.9;
zones["屋根裏"].AddSurface(floor.GetSurface(true));
zones["2F子供室2"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["屋根2"], "CE-5");
floor.SurfaceArea = 4.2;
zones["屋根裏"].AddSurface(floor.GetSurface(true));
zones["2F廊下"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["屋根2"], "CE-6");
floor.SurfaceArea = 3.1;
zones["屋根裏"].AddSurface(floor.GetSurface(true));
zones["2F押入1"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["屋根2"], "CE-7");
floor.SurfaceArea = 0.8;
zones["屋根裏"].AddSurface(floor.GetSurface(true));
zones["2F押入2"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["屋根2"], "CE-8");
floor.SurfaceArea = 1.7;
zones["屋根裏"].AddSurface(floor.GetSurface(true));
zones["2F押入3"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["屋根2"], "CE-9");
floor.SurfaceArea = 1.7;
zones["屋根裏"].AddSurface(floor.GetSurface(true));
zones["2FWC"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["屋根2"], "CE-10");
floor.SurfaceArea = 3.3;
zones["屋根裏"].AddSurface(floor.GetSurface(true));
zones["階段室"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-1");
floor.SurfaceArea = 17.4;
zones["2F主寝室"].AddSurface(floor.GetSurface(true));
zones["1F居間"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-2");
floor.SurfaceArea = 17.4;
zones["2F押入1"].AddSurface(floor.GetSurface(true));
zones["1F居間"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-3");
floor.SurfaceArea = 10.7 - 0.91 * 0.91;
zones["1F和室"].AddSurface(floor.GetSurface(true));
zones["2F子供室1"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-4");
floor.SurfaceArea = 0.91 * 0.91;
zones["2F子供室1"].AddSurface(floor.GetSurface(true));
zones["1F押入"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-5");
floor.SurfaceArea = 0.8;
zones["2F押入2"].AddSurface(floor.GetSurface(true));
zones["1F和室"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-6");
floor.SurfaceArea = 0.8;
zones["2F押入3"].AddSurface(floor.GetSurface(true));
zones["1F和室"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-7");
floor.SurfaceArea = 0.8;
zones["2F押入3"].AddSurface(floor.GetSurface(true));
zones["1F押入"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-8");
floor.SurfaceArea = 3.185 * 2.275;
zones["2F予備室"].AddSurface(floor.GetSurface(true));
zones["1F台所"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-9");
floor.SurfaceArea = 3.185 * 0.91;
zones["2F予備室"].AddSurface(floor.GetSurface(true));
zones["1F廊下"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-10");
floor.SurfaceArea = 4.2;
zones["2F廊下"].AddSurface(floor.GetSurface(true));
zones["1F廊下"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-11");
floor.SurfaceArea = 1.7;
zones["2FWC"].AddSurface(floor.GetSurface(true));
zones["1F廊下"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-12");
floor.SurfaceArea = 1.82 * 0.91;
zones["2F子供室2"].AddSurface(floor.GetSurface(true));
zones["1F廊下"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-13");
floor.SurfaceArea = 2.73 * 1.82;
zones["2F子供室2"].AddSurface(floor.GetSurface(true));
zones["1F洗面所"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-14");
floor.SurfaceArea = 1.82 * 1.82;
zones["2F子供室2"].AddSurface(floor.GetSurface(true));
zones["1F浴室"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["2F床"], "FL2-15");
floor.SurfaceArea = 0.91 * 1.82;
zones["階段室"].AddSurface(floor.GetSurface(true));
zones["1FWC"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["1F床"], "FL1-1");
floor.SurfaceArea = 20.5;
zones["1F居間"].AddSurface(floor.GetSurface(true));
zones["床下"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["1F床"], "FL1-2");
floor.SurfaceArea = 11.6;
zones["1F和室"].AddSurface(floor.GetSurface(true));
zones["床下"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["1F床"], "FL1-3");
floor.SurfaceArea = 7.2;
zones["1F台所"].AddSurface(floor.GetSurface(true));
zones["床下"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["1F床"], "FL1-4");
floor.SurfaceArea = 5.0;
zones["1F洗面所"].AddSurface(floor.GetSurface(true));
zones["床下"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["1F床"], "FL1-5");
floor.SurfaceArea = 3.3;
zones["1F浴室"].AddSurface(floor.GetSurface(true));
zones["床下"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["1F床"], "FL1-6");
floor.SurfaceArea = 1.7;
zones["1FWC"].AddSurface(floor.GetSurface(true));
zones["床下"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["1F床"], "FL1-7");
floor.SurfaceArea = 1.7;
zones["1F廊下"].AddSurface(floor.GetSurface(true));
zones["床下"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
floor = new Wall(wallLayers["1F床"], "FL1-8");
floor.SurfaceArea = 1.7;
zones["1F押入"].AddSurface(floor.GetSurface(true));
zones["床下"].AddSurface(floor.GetSurface(false));
floors.Add(floor.Name, floor);
//総合熱伝達率設定
foreach (string key in floors.Keys)
{
floors[key].GetSurface(true).FilmCoefficient = (4.6 + 1.5) / 2 + 4.7;
floors[key].GetSurface(true).ConvectiveRate = (4.6 + 1.5) / 2 / floors[key].GetSurface(true).FilmCoefficient;
floors[key].GetSurface(false).FilmCoefficient = (4.6 + 1.5) / 2 + 4.7;
floors[key].GetSurface(false).ConvectiveRate = (4.6 + 1.5) / 2 / floors[key].GetSurface(false).FilmCoefficient;
//上下別の設定
/*floors[key].GetSurface(true).FilmCoefficient = 4.6 + 4.7;
floors[key].GetSurface(true).ConvectiveRate = 4.6 / (4.6 + 4.7);
floors[key].GetSurface(false).FilmCoefficient = 1.5 + 4.7;
floors[key].GetSurface(false).ConvectiveRate = 1.5 / (1.5 + 4.7);*/
floors[key].TimeStep = TIME_STEP;
}
}
/// <summary>壁熱貫流テスト（潜熱蓄熱材）</summary>
private static void wallHeatTransferTest3()
{
//初期温度
const double INIT_TEMP = 35;
//壁層を作成
WallLayers wl = new WallLayers();
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.FrexibleBoard), 0.0165));
wl.AddLayer(new WallLayers.Layer(new WallMaterial("ダミー材料", 1, 1), 0.02));
wl.AddLayer(new WallLayers.Layer(new WallMaterial("ダミー材料", 1, 1), 0.02));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.ExtrudedPolystyreneFoam_3), 0.02));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.Plywood), 0.009));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.AirGap), 0.015));
wl.AddLayer(new WallLayers.Layer(new WallMaterial(WallMaterial.PredefinedMaterials.Plywood), 0.009));
//壁体を作成
Wall wall = new Wall(wl);
wall.TimeStep = 1200;
wall.AirTemperature1 = 20;
wall.AirTemperature2 = 20;
wall.SurfaceArea = 6.48;
//潜熱蓄熱材1を作成して設定
LatentHeatStorageMaterial material1;
material1 = new LatentHeatStorageMaterial(19, new WallMaterial("パッシブ・スミターマル（凝固）", 0.19, 3.6 * 1400));
material1.AddMaterial(23, new WallMaterial("パッシブ・スミターマル（遷移）", (0.19 + 0.22) / 2d, 15.1 * 1400));
material1.AddMaterial(100, new WallMaterial("パッシブ・スミターマル（融解）", 0.22, 3.6 * 1400));
material1.Initialize(INIT_TEMP);
wall.SetLatentHeatStorageMaterial(1, material1);
//潜熱蓄熱材2を作成して設定
LatentHeatStorageMaterial material2;
material2 = new LatentHeatStorageMaterial(30, new WallMaterial("スミターマル（凝固）", 0.19, 3.6 * 1390));
material2.AddMaterial(32, new WallMaterial("スミターマル（遷移）", (0.19 + 0.22) / 2d, 63.25 * 1400));
material2.AddMaterial(100, new WallMaterial("スミターマル（融解）", 0.22, 3.5 * 1410));
material2.Initialize(INIT_TEMP);
wall.SetLatentHeatStorageMaterial(2, material2);
//潜熱蓄熱材の間に配管を埋設
Tube tube = new Tube(0.84, 0.346, 4186);
wall.AddTube(tube, 1);
tube.SetFlowRate(0);
tube.FluidTemperature = 40;
//壁体温度を初期化
wall.InitializeTemperature(INIT_TEMP);
for (int i = 0; i < wall.Layers.LayerNumber; i++) Console.Write("温度" + i + ", ");
Console.WriteLine("蓄熱量[kJ]");
for (int i = 0; i < 200; i++)
{
if (i == 100)
{
tube.SetFlowRate(0.54); //通水開始
wall.AirTemperature1 = 30;
wall.AirTemperature2 = 30;
}
wall.Update();
double[] tmp = wall.GetTemperatures();
for (int j = 0; j < tmp.Length - 1; j++) Console.Write(((tmp[j] + tmp[j + 1]) / 2d).ToString("F1") + ", ");
Console.Write(wall.GetHeatStorage(INIT_TEMP).ToString("F0"));
Console.WriteLine();
}
Console.Read();
}
private static void makeInWalls(
Dictionary<string, Zone> zones, Dictionary<string, WallLayers> wallLayers, Dictionary<string, Wall> doors,
out Dictionary<string, Wall> inWalls)
{
inWalls = new Dictionary<string, Wall>();
Wall inWall;
inWall = new Wall(wallLayers["内壁"], "IW1-1");
inWall.SurfaceArea = 3.64 * 2.7;
zones["1F居間"].AddSurface(inWall.GetSurface(true));
zones["1F和室"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW1-2");
inWall.SurfaceArea = 0.91 * 2.7;
zones["1F和室"].AddSurface(inWall.GetSurface(true));
zones["1F押入"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW1-3");
inWall.SurfaceArea = 1.82 * 2.7;
zones["1F和室"].AddSurface(inWall.GetSurface(true));
zones["1F廊下"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW1-4");
inWall.SurfaceArea = 0.91 * 2.7;
zones["1F和室"].AddSurface(inWall.GetSurface(true));
zones["1F浴室"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW1-5");
inWall.SurfaceArea = 0.91 * 2.7;
zones["1F押入"].AddSurface(inWall.GetSurface(true));
zones["1F浴室"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW1-6");
inWall.SurfaceArea = 1.82 * 2.7;
zones["1F廊下"].AddSurface(inWall.GetSurface(true));
zones["1F浴室"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW1-7");
inWall.SurfaceArea = 1.82 * 2.7 - doors["DR1-3"].SurfaceArea;
zones["1F洗面所"].AddSurface(inWall.GetSurface(true));
zones["1F浴室"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW1-8");
inWall.SurfaceArea = 0.91 * 2.7 - doors["DR1-4"].SurfaceArea;
zones["1F洗面所"].AddSurface(inWall.GetSurface(true));
zones["1F廊下"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW1-9");
inWall.SurfaceArea = 1.82 * 2.7;
zones["1F洗面所"].AddSurface(inWall.GetSurface(true));
zones["1FWC"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW1-10");
inWall.SurfaceArea = 1.82 * 2.7;
zones["階段室"].AddSurface(inWall.GetSurface(true));
zones["1F浴室"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW1-11");
inWall.SurfaceArea = 3.185 * 2.7 - doors["DR1-8"].SurfaceArea;
zones["1F台所"].AddSurface(inWall.GetSurface(true));
zones["1F廊下"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW1-12");
inWall.SurfaceArea = 2.73 * 2.7 - doors["DR1-6"].SurfaceArea;
zones["1F居間"].AddSurface(inWall.GetSurface(true));
zones["1F廊下"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW1-13");
inWall.SurfaceArea = 0.91 * 2.7 - doors["DR1-5"].SurfaceArea;
zones["1FWC"].AddSurface(inWall.GetSurface(true));
zones["1F廊下"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-1");
inWall.SurfaceArea = 3.64 * 2.7;
zones["2F主寝室"].AddSurface(inWall.GetSurface(true));
zones["2F子供室1"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-2");
inWall.SurfaceArea = 3.185 * 2.7;
zones["2F主寝室"].AddSurface(inWall.GetSurface(true));
zones["2F予備室"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-3");
inWall.SurfaceArea = 1.82 * 2.7;
zones["2F子供室1"].AddSurface(inWall.GetSurface(true));
zones["2F押入3"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-4");
inWall.SurfaceArea = 0.91 * 2.7;
zones["2F押入2"].AddSurface(inWall.GetSurface(true));
zones["2F押入3"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-5");
inWall.SurfaceArea = 0.91 * 2.7;
zones["2F押入2"].AddSurface(inWall.GetSurface(true));
zones["2F子供室2"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-6");
inWall.SurfaceArea = 1.82 * 2.7;
zones["階段室"].AddSurface(inWall.GetSurface(true));
zones["2F子供室2"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-7");
inWall.SurfaceArea = 1.82 * 2.7;
zones["階段室"].AddSurface(inWall.GetSurface(true));
zones["2FWC"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-8");
inWall.SurfaceArea = 1.82 * 2.7;
zones["2F予備室"].AddSurface(inWall.GetSurface(true));
zones["2FWC"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-9");
inWall.SurfaceArea = 0.91 * 2.7;
zones["階段室"].AddSurface(inWall.GetSurface(true));
zones["2F廊下"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-10");
inWall.SurfaceArea = 1.82 * 2.7 - doors["DR2-2"].SurfaceArea;
zones["2F主寝室"].AddSurface(inWall.GetSurface(true));
zones["2F廊下"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-11");
inWall.SurfaceArea = 0.91 * 2.7 - doors["DR2-8"].SurfaceArea;
zones["2F子供室1"].AddSurface(inWall.GetSurface(true));
zones["2F廊下"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-12");
inWall.SurfaceArea = 0.91 * 2.7;
zones["2F主寝室"].AddSurface(inWall.GetSurface(true));
zones["2F押入1"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-13");
inWall.SurfaceArea = 0.91 * 2.7 - doors["DR2-7"].SurfaceArea;
zones["2FWC"].AddSurface(inWall.GetSurface(true));
zones["2F廊下"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-14");
inWall.SurfaceArea = 1.82 * 2.7 - doors["DR2-5"].SurfaceArea;
zones["2F子供室2"].AddSurface(inWall.GetSurface(true));
zones["2F廊下"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
inWall = new Wall(wallLayers["内壁"], "IW2-15");
inWall.SurfaceArea = 0.91 * 2.7;
zones["2F子供室1"].AddSurface(inWall.GetSurface(true));
zones["2F押入2"].AddSurface(inWall.GetSurface(false));
inWalls.Add(inWall.Name, inWall);
//総合熱伝達率設定
foreach (string key in inWalls.Keys)
{
inWalls[key].GetSurface(true).FilmCoefficient = AI;
inWalls[key].GetSurface(false).FilmCoefficient = AI;
inWalls[key].TimeStep = TIME_STEP;
}
}
//パソコンによる空気調和計算法 pp.180
private static void makeRoom(double timeStep, out Zone room, out Wall exWall, out Wall inWall, out Wall ceiling, out Wall floor,
out Sun sun, out Outdoor outdoor)
{
//太陽を作成//東京
sun = new Sun(35, 139, 134);
//外界を作成
outdoor = new Outdoor();
outdoor.Sun = sun;
//室を作成
room = new Zone();
room.Volume = 353;
room.SensibleHeatCapacity = 3500 * 1000;
room.InitializeAirState(26, 0.018);
room.VentilationVolume = room.Volume * 0.2;
room.TimeStep = timeStep;
WallLayers layers;
WallLayers.Layer layer;
//外壁を作成
layers = new WallLayers();
layer = new WallLayers.Layer(new WallMaterial("アルミ化粧板", 210, 2373), 0.002);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("中空層", 1d / 0.086d, 0), 0);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("ロックウール", 0.042, 84), 0.050);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("コンクリート", 1.4, 1934), 0.150);
layers.AddLayer(layer);
exWall = new Wall(layers);
exWall.SurfaceArea = 22.4;
exWall.TimeStep = timeStep;
WallSurface ews = exWall.GetSurface(true);
ews.SolarAbsorptance = 0.7;
ews.LongWaveEmissivity = 0.9;
ews.Albedo = 0.2;
WallSurface iws = exWall.GetSurface(false);
ews.FilmCoefficient = 23;
iws.FilmCoefficient = 9.3;
exWall.SetIncline(new Incline(Incline.Orientation.SW, 0.5 * Math.PI), true);
room.AddSurface(iws); //部屋に追加
outdoor.AddWallSurface(ews); //外界に追加
room.SetShortWaveRadiationRate(iws, iws.Area); //放射成分吸収比率を設定
room.SetLongWaveRadiationRate(iws, iws.Area); //放射成分吸収比率を設定
//内壁を作成
layers = new WallLayers();
layer = new WallLayers.Layer(new WallMaterial("コンクリート", 1.4, 1934), 0.120, 2);
layers.AddLayer(layer);
inWall = new Wall(layers);
inWall.SurfaceArea = 100.8;
inWall.TimeStep = timeStep;
iws = inWall.GetSurface(true);
iws.FilmCoefficient = 9.3;
room.AddSurface(iws);
room.SetShortWaveRadiationRate(iws, iws.Area); //放射成分吸収比率を設定
room.SetLongWaveRadiationRate(iws, iws.Area); //放射成分吸収比率を設定
//床と天井を作成
layers = new WallLayers();
layer = new WallLayers.Layer(new WallMaterial("カーペット", 0.08, 318), 0.015);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("コンクリート", 1.4, 1934), 0.150);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("中空層", 1d / 0.086d, 0), 0);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("石膏ボード", 0.17, 1030), 0.012);
layers.AddLayer(layer);
//床
floor = new Wall(layers);
floor.SurfaceArea = 98;
floor.TimeStep = timeStep;
iws = floor.GetSurface(true);
iws.FilmCoefficient = 9.3;
room.AddSurface(iws);
room.SetShortWaveRadiationRate(iws, iws.Area * 2.0); //放射成分吸収比率を設定**多め
room.SetLongWaveRadiationRate(iws, iws.Area * 2.0); //放射成分吸収比率を設定**多め
//天井
ceiling = new Wall(layers);
ceiling.SurfaceArea = 98;
ceiling.TimeStep = timeStep;
iws = ceiling.GetSurface(false);
iws.FilmCoefficient = 9.3;
room.AddSurface(iws);
room.SetShortWaveRadiationRate(iws, iws.Area); //放射成分吸収比率を設定
room.SetLongWaveRadiationRate(iws, iws.Area); //放射成分吸収比率を設定
//室温・隣室温度を設定
inWall.AirTemperature2 = ceiling.AirTemperature1 = floor.AirTemperature2 = 25;
//窓を作成
GlassPanes glassPanes = new GlassPanes(0.79, 0.04, 190);
Window window = new Window(glassPanes);
WindowSurface ws = window.GetSurface(true);
ws.FilmCoefficient = 23;
ws.Albedo = 0.2;
window.SurfaceArea = 28;
window.OutSideIncline = new Incline(Incline.Orientation.SW, 0.5 * Math.PI);
ws = window.GetSurface(false);
ws.FilmCoefficient = 9.3;
room.AddWindow(window);
outdoor.AddWindow(window);
window.ShadowRate = 0;
room.SetShortWaveRadiationRate(window, window.SurfaceArea); //放射成分吸収比率を設定
room.SetLongWaveRadiationRate(window, window.SurfaceArea); //放射成分吸収比率を設定
//壁体初期化
inWall.InitializeTemperature(22);
exWall.InitializeTemperature(22);
floor.InitializeTemperature(22);
ceiling.InitializeTemperature(22);
}
private static void makeSunZoneBuilding(out Zone[] rooms, out Wall[] walls, out Window[] windows, out Outdoor[] outdoor, out Sun sun)
{
const double ai = 8.29;
const double ao = 29.3;
const double aowin = 21;
const double extswEmissivity = 0.6d;
const double extlwEmissivity = 0.9d;
//室を作成
rooms = new Zone[2];
//BackZoneを作成
rooms[0] = new Zone();
rooms[0].Volume = 8 * 6 * 2.7; //室容積[m3]
//内部負荷[W]
rooms[0].AddHeatGain(new ConstantHeatGain(200 * 0.4, 200 * 0.6, 0));
if (CALCULATE_ELEVATION_EFFECT) rooms[0].AtmosphericPressure = MoistAir.GetAtmosphericPressure(1609);
else rooms[0].AtmosphericPressure = 101.325d;
rooms[0].TimeStep = 3600;
rooms[0].InitializeAirState(20, 0.01);
rooms[0].FilmCoefficient = ai;
//対流成分
rooms[0].SetConvectiveRate(3.16 / ai);
//漏気量
rooms[0].VentilationVolume = rooms[0].Volume * 0.5;
if (!CALCULATE_ELEVATION_EFFECT) rooms[0].Volume *= 0.82;
//SunZoneを作成
rooms[1] = new Zone();
rooms[1].Volume = 8 * 2 * 2.7; //室容積[m3]
if (CALCULATE_ELEVATION_EFFECT) rooms[1].AtmosphericPressure = MoistAir.GetAtmosphericPressure(1609);
else rooms[1].AtmosphericPressure = 101.325d;
rooms[1].TimeStep = 3600;
rooms[1].InitializeAirState(20, 0.01);
rooms[1].FilmCoefficient = ai;
//対流成分
rooms[1].SetConvectiveRate(3.16 / ai);
//漏気量
rooms[1].VentilationVolume = rooms[1].Volume * 0.5;
if (!CALCULATE_ELEVATION_EFFECT) rooms[1].Volume *= 0.82;
//外界を作成
outdoor = new Outdoor[2];
outdoor[0] = new Outdoor();
outdoor[0].GroundTemperature = 10;
sun = new Sun(39.8, 360 - 104.9, 360 - 105);
outdoor[0].Sun = sun;
//壁構成を作成
WallLayers exwLL, flwLL, rfwLL, exwLH, flwLH, rfwLH;
makeWallLayer(true, out exwLL, out flwLL, out rfwLL);
makeWallLayer(true, out exwLH, out flwLH, out rfwLH);
//壁表面を作成
WallSurface ews, iws;
//壁を作成
walls = new Wall[11];
//屋根を作成1
walls[0] = new Wall(rfwLL);
walls[0].Name = "屋根";
walls[0].SurfaceArea = 48;
walls[0].SetIncline(new Incline(Incline.Orientation.N, 0), false);
walls[0].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[0].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[0].InitializeTemperature(25);
//壁表面の設定
iws = walls[0].GetSurface(true);
ews = walls[0].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//屋根を作成2
walls[1] = new Wall(rfwLH);
walls[1].Name = "屋根";
walls[1].SurfaceArea = 16;
walls[1].SetIncline(new Incline(Incline.Orientation.N, 0), false);
walls[1].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[1].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[1].InitializeTemperature(25);
//壁表面の設定
iws = walls[1].GetSurface(true);
ews = walls[1].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
rooms[1].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//床を作成1
walls[2] = new Wall(flwLL);
walls[2].Name = "床";
walls[2].SurfaceArea = 48;
walls[2].SetIncline(new Incline(Incline.Orientation.N, Math.PI), false);
walls[2].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[2].SetFilmCoefficient(0.04, false);//外表面総合熱伝達率[W/(m2K)]//地面絶縁体
walls[2].InitializeTemperature(25);
//壁表面の設定
iws = walls[2].GetSurface(true);
ews = walls[2].GetSurface(false);
rooms[0].AddSurface(iws);
outdoor[0].AddGroundWallSurface(ews);
//床を作成2
walls[3] = new Wall(flwLH);
walls[3].Name = "床";
walls[3].SurfaceArea = 8 * 2;
walls[3].SetIncline(new Incline(Incline.Orientation.N, Math.PI), false);
walls[3].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[3].SetFilmCoefficient(0.04, false);//外表面総合熱伝達率[W/(m2K)]//地面絶縁体
walls[3].InitializeTemperature(25);
//壁表面の設定
iws = walls[3].GetSurface(true);
ews = walls[3].GetSurface(false);
rooms[1].AddSurface(iws);
outdoor[0].AddGroundWallSurface(ews);
//北外壁を作成
walls[4] = new Wall(exwLL);
walls[4].Name = "北外壁";
walls[4].SurfaceArea = 8 * 2.7;
walls[4].SetIncline(new Incline(Incline.Orientation.N, 0.5 * Math.PI), false);
walls[4].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[4].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[4].InitializeTemperature(25);
//壁表面の設定
iws = walls[4].GetSurface(true);
ews = walls[4].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//南外壁を作成
walls[5] = new Wall(exwLH);
walls[5].Name = "南外壁";
walls[5].SurfaceArea = 8 * 2.7 - 6d - 6d;
walls[5].SetIncline(new Incline(Incline.Orientation.S, 0.5 * Math.PI), false);
walls[5].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[5].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[5].InitializeTemperature(25);
//壁表面の設定
iws = walls[5].GetSurface(true);
ews = walls[5].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[1].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//東外壁を作成1
walls[6] = new Wall(exwLL);
walls[6].Name = "東外壁";
walls[6].SurfaceArea = 6 * 2.7;
walls[6].SetIncline(new Incline(Incline.Orientation.E, 0.5 * Math.PI), false);
walls[6].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[6].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[6].InitializeTemperature(25);
//壁表面の設定
iws = walls[6].GetSurface(true);
ews = walls[6].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//東外壁を作成2
walls[7] = new Wall(exwLH);
walls[7].Name = "東外壁";
walls[7].SurfaceArea = 2 * 2.7;
walls[7].SetIncline(new Incline(Incline.Orientation.E, 0.5 * Math.PI), false);
walls[7].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[7].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[7].InitializeTemperature(25);
//壁表面の設定
iws = walls[7].GetSurface(true);
ews = walls[7].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[1].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//西外壁を作成1
walls[8] = new Wall(exwLL);
walls[8].Name = "西外壁";
walls[8].SurfaceArea = 6 * 2.7;
walls[8].SetIncline(new Incline(Incline.Orientation.W, 0.5 * Math.PI), false);
walls[8].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[8].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[8].InitializeTemperature(25);
//壁表面の設定
iws = walls[8].GetSurface(true);
ews = walls[8].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[0].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//西外壁を作成2
walls[9] = new Wall(exwLH);
walls[9].Name = "西外壁";
walls[9].SurfaceArea = 2 * 2.7;
walls[9].SetIncline(new Incline(Incline.Orientation.W, 0.5 * Math.PI), false);
walls[9].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[9].SetFilmCoefficient(ao, false);//外表面総合熱伝達率[W/(m2K)]
walls[9].InitializeTemperature(25);
//壁表面の設定
iws = walls[9].GetSurface(true);
ews = walls[9].GetSurface(false);
ews.SolarAbsorptance = extswEmissivity;
ews.LongWaveEmissivity = extlwEmissivity;
ews.Albedo = 0.2;
rooms[1].AddSurface(iws);
outdoor[0].AddWallSurface(ews);
//共用壁を作成
WallLayers.Layer layer = new WallLayers.Layer(new WallMaterial("CommonWall", 0.510, 1400d * 1000d / 1000d), 0.2, 4);
WallLayers cWL = new WallLayers();
cWL.AddLayer(layer);
walls[10] = new Wall(cWL);
walls[10].Name = "共用壁";
walls[10].SurfaceArea = 8 * 2.7;
walls[10].SetIncline(new Incline(Incline.Orientation.S, 0.5 * Math.PI), false);
walls[10].SetFilmCoefficient(ai, true); //内表面総合熱伝達率[W/(m2K)]
walls[10].SetFilmCoefficient(ai, false);//内表面総合熱伝達率[W/(m2K)]
walls[10].InitializeTemperature(25);
//壁表面の設定
iws = walls[10].GetSurface(true);
ews = walls[10].GetSurface(false);
rooms[0].AddSurface(iws);
rooms[1].AddSurface(ews);
//窓の作成
GlassPanes glassPane = new GlassPanes(0.74745, 0.043078, 1d / (1d / 333 + 1d / 333 + 1d / 6.297));
//glassPane.LongWaveEmissivity = extlwEmissivity;
//glassPane.ConvectiveRate = 3.16 / ai;
glassPane.AngularDependenceCoefficients = new double[] { 1.3930, 5.5401, -19.5736, 19.0379 };
Window window1 = new Window(glassPane);
Window window2 = new Window(glassPane);
//長波長吸収率・アルベド
WindowSurface ws;
ws = window1.GetSurface(true);
ws.LongWaveEmissivity = extlwEmissivity;
ws.FilmCoefficient = aowin;//表面総合熱伝達率[W/(m2K)]
ws.Albedo = 0.2;
ws = window2.GetSurface(true);
ws.LongWaveEmissivity = extlwEmissivity;
ws.FilmCoefficient = aowin;//表面総合熱伝達率[W/(m2K)]
ws.Albedo = 0.2;
//対流・放射成分
ws = window1.GetSurface(false);
ws.ConvectiveRate = 3.16 / ai;
ws.FilmCoefficient = ai;//表面総合熱伝達率[W/(m2K)]
ws = window2.GetSurface(false);
ws.ConvectiveRate = 3.16 / ai;
ws.FilmCoefficient = ai;//表面総合熱伝達率[W/(m2K)]
//窓面積
window1.SurfaceArea = 6;
window2.SurfaceArea = 6;
window1.OutSideIncline = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
window2.OutSideIncline = new Incline(Incline.Orientation.S, 0.5 * Math.PI);
//室と外界に追加
rooms[1].AddWindow(window1);
rooms[1].AddWindow(window2);
outdoor[0].AddWindow(window1);
outdoor[0].AddWindow(window2);
windows = new Window[] { window1, window2 };
//放射率
rooms[1].SetShortWaveRadiationRate(walls[3].GetSurface(true), 0.6); //床面
rooms[1].SetShortWaveRadiationRate(walls[1].GetSurface(true), 0.06); //天井面
rooms[1].SetShortWaveRadiationRate(walls[7].GetSurface(true), 0.02); //東面
rooms[1].SetShortWaveRadiationRate(walls[9].GetSurface(true), 0.02); //西面
rooms[1].SetShortWaveRadiationRate(walls[10].GetSurface(false), 0.2); //北面
rooms[1].SetShortWaveRadiationRate(walls[5].GetSurface(true), 0.03); //南面
rooms[1].SetShortWaveRadiationRate(window1, 0.035);
rooms[1].SetShortWaveRadiationRate(window2, 0.035);
rooms[1].ControlDrybulbTemperature = false;
//対流成分設定
rooms[0].SetConvectiveRate(3.16 / ai);
rooms[1].SetConvectiveRate(3.16 / ai);
outdoor[0].SetConvectiveRate(24.67 / ao);
}
private static void RoomModelTest()
{
//夏か否か
bool IS_SUMMER = true;
//タイムステップ
const double TIME_STEP = 1800;
//室を作成
Zone room;
Sun sun;
Wall exWall, inWall, floor, ceiling;
Outdoor oDoor;
makeRoom(TIME_STEP, out room, out exWall, out inWall, out ceiling, out floor, out sun, out oDoor);
Wall[] walls = new Wall[] { exWall, inWall, ceiling, floor };
Zone[] rooms = new Zone[] { room };
//発熱要素
ConstantHeatGain hGain;
if(IS_SUMMER) hGain = new ConstantHeatGain(55 * 16 * 0.5 + 2900 * 0.6 + 500 * 0.6, 55 * 16 * 0.5 + 2900 * 0.4 + 500 * 0.4, (119 - 55) * 16);
else hGain = new ConstantHeatGain((71 * 16 * 0.5 + 2900 * 0.6 + 500 * 0.6) * 0.5, (71 * 16 * 0.5 + 2900 * 0.4 + 500 * 0.4) * 0.5, ((119 - 71) * 16) * 0.5);
//設計用気象データ
double[] wdIdn, wdIsky, wdDbt, wdAhd, wdRN;
if (IS_SUMMER)
{
wdIdn = new double[] { 0, 0, 0, 0, 0, 244, 517, 679, 774, 829, 856, 862, 847, 809, 739, 619, 415, 97, 0, 0, 0, 0, 0, 0 };
wdIsky = new double[] { 0, 0, 0, 0, 21, 85, 109, 116, 116, 113, 110, 109, 111, 114, 116, 114, 102, 63, 0, 0, 0, 0, 0, 0 };
wdDbt = new double[] { 27.4, 27.1, 26.8, 26.5, 26.9, 27.7, 28.8, 29.8, 30.8, 31.5, 32.1, 32.6, 32.9, 33.2, 33.5, 33.1, 32.4, 31.5, 30.6, 29.8, 29.1, 28.5, 28.1, 27.7 };
wdAhd = new double[] { 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018, 0.018 };
wdRN = new double[] { 24, 24, 24, 24, 24, 24, 25, 25, 25, 25, 26, 26, 26, 26, 26, 26, 26, 25, 25, 25, 25, 24, 24, 24 };
room.DrybulbTemperatureSetPoint = 26;
room.HumidityRatioSetPoint = 0.0105;
}
else
{
wdIdn = new double[] { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
wdIsky = new double[] { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
wdDbt = new double[] { 0.3, 0.1, 0, -0.2, -0.4, -0.5, -0.2, 0.5, 1.2, 1.9, 2.4, 2.8, 3.1, 3.3, 3.5, 3.3, 3, 2.6, 2.1, 1.7, 1.3, 0.9, 0.7, 0.4 };
wdAhd = new double[] { 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014, 0.0014 };
//wdRN = new double[] { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 };
wdRN = new double[] { 124, 123, 123, 123, 123, 122, 123, 124, 125, 127, 128, 128, 129, 129, 130, 129, 129, 128, 127, 126, 126, 125, 124, 124 };
room.DrybulbTemperatureSetPoint = 22;
room.HumidityRatioSetPoint = 0.0082;
}
using (StreamWriter sWriter = new StreamWriter("test.csv", false, Encoding.GetEncoding("Shift_JIS")))
{
sWriter.WriteLine("時刻,室乾球温度[C],顕熱負荷[W],室絶対湿度[kg/kg(DA)],潜熱負荷[W], 周壁平均温度[C]");
DateTime dt;
if(IS_SUMMER) dt = new DateTime(1999, 7, 21);
else dt = new DateTime(1999, 1, 21);
for (int i = 0; i < (10 * 24 + 1) * 60 * 60 / TIME_STEP; i++)
{
//外気条件を更新
int wdIndex = dt.Hour;
wdIndex--;
if (wdIndex < 0) wdIndex = 23;
double dbt = wdDbt[wdIndex];
double ahd = wdAhd[wdIndex];
oDoor.AirState = MoistAir.GetAirStateFromDBHR(dbt, ahd);
room.VentilationAirState = MoistAir.GetAirStateFromDBHR(dbt, ahd);
//太陽の情報を更新
sun.Update(dt);
sun.SetGlobalHorizontalRadiation(wdIsky[wdIndex], wdIdn[wdIndex]);
//隣室温度を設定
ceiling.AirTemperature1 = floor.AirTemperature2 = room.CurrentDrybulbTemperature;
inWall.AirTemperature2 = room.CurrentDrybulbTemperature * 0.7 + dbt * 0.3;
//室内発熱要素を設定
if (9 <= dt.Hour && dt.Hour <= 18) room.AddHeatGain(hGain);
else room.RemoveHeatGain(hGain);
//室温制御を更新
room.ControlDrybulbTemperature = (8 <= dt.Hour && dt.Hour <= 18);
room.ControlHumidityRatio = (8 <= dt.Hour && dt.Hour <= 18);
//相当外気温度を更新
oDoor.SetWallSurfaceBoundaryState();
oDoor.NocturnalRadiation = wdRN[wdIndex];
//壁の熱流CFを更新
foreach (Wall wall in walls) wall.Update();
//室を更新
room.Update();
//書き出し
sWriter.WriteLine(dt.ToShortTimeString() + "," + room.CurrentDrybulbTemperature + ", " +
room.CurrentSensibleHeatLoad + "," + room.CurrentHumidityRatio + ", " + room.CurrentLatentHeatLoad + "," + room.CurrentMeanRadiantTemperature);
dt = dt.AddSeconds(TIME_STEP);
if (i == 24 * 60 * 60 / TIME_STEP)
{
if (IS_SUMMER) dt = new DateTime(1999, 7, 21);
else dt = new DateTime(1999, 1, 21);
}
}
}
}
/// <summary>Sample program calculating the unsteady heat conduction of wall</summary>
private static void wallTest1()
{
WallLayers layers = new WallLayers();
WallLayers.Layer layer;
layer = new WallLayers.Layer(new WallMaterial("Plywood", 0.19, 716), 0.025);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("Concrete", 1.4, 1934), 0.120);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("Air gap", 1d / 0.086, 0), 0.020);
layers.AddLayer(layer);
layer = new WallLayers.Layer(new WallMaterial("Rock wool", 0.042, 84), 0.050);
layers.AddLayer(layer);
Wall wall = new Wall(layers);
wall.TimeStep = 3600;
wall.AirTemperature1 = 20;
wall.AirTemperature2 = 10;
wall.InitializeTemperature(10); //Initial temperature is 10 C
wall.SurfaceArea = 1;
Console.WriteLine("Plywood, Concrete, Air gap, Rock wool");
double[] temps;
for (int i = 0; i < 24; i++)
{
wall.Update();
temps = wall.GetTemperatures();
Console.Write((i + 1).ToString("F0").PadLeft(2) + "Hour | ");
for (int j = 0; j < temps.Length - 1; j++) Console.Write(((temps[j] + temps[j + 1]) / 2d).ToString("F1") + " | ");
Console.WriteLine();
}
//Iterate until wall become steady state
for (int i = 0; i < 1000; i++) wall.Update();
Console.WriteLine();
Console.WriteLine("Steady state");
temps = wall.GetTemperatures();
for (int j = 0; j < temps.Length - 1; j++) Console.Write(((temps[j] + temps[j + 1]) / 2d).ToString("F1") + " | ");
Console.WriteLine();
Console.WriteLine("Heat transfer at steady state 1: " + wall.GetHeatTransfer(true).ToString("F1"));
Console.WriteLine("Heat transfer at steady state 2: " + wall.GetHeatTransfer(false).ToString("F1"));
Console.WriteLine("Heat transfer at steady state 3: " + wall.GetStaticHeatTransfer().ToString("F1"));
Console.Read();
}