public static void createLayerParts(SliceVolumeStorage storage, Slicer slicer, ConfigConstants.REPAIR_OVERLAPS unionAllType)
{
for (int layerIndex = 0; layerIndex < slicer.layers.Count; layerIndex++)
{
storage.layers.Add(new SliceLayer());
storage.layers[layerIndex].printZ = slicer.layers[layerIndex].z;
LayerPart.createLayerWithParts(storage.layers[layerIndex], slicer.layers[layerIndex], unionAllType);
}
}
private void sliceModels(SliceDataStorage storage)
{
timeKeeper.Restart();
#if false
optomizedModel.saveDebugSTL("debug_output.stl");
#endif
LogOutput.Log("Slicing model...\n");
List<Slicer> slicerList = new List<Slicer>();
for (int volumeIndex = 0; volumeIndex < optomizedModel.volumes.Count; volumeIndex++)
{
Slicer slicer = new Slicer(optomizedModel.volumes[volumeIndex], config);
slicerList.Add(slicer);
}
#if false
slicerList[0].DumpSegmentsToGcode("Volume 0 Segments.gcode");
slicerList[0].DumpPolygonsToGcode("Volume 0 Polygons.gcode");
//slicerList[0].DumpPolygonsToHTML("Volume 0 Polygons.html");
#endif
LogOutput.Log("Sliced model in {0:0.0}s\n".FormatWith(timeKeeper.Elapsed.Seconds));
timeKeeper.Restart();
LogOutput.Log("Generating support map...\n");
storage.support.GenerateSupportGrid(optomizedModel, config);
storage.modelSize = optomizedModel.size_um;
storage.modelMin = optomizedModel.minXYZ_um;
storage.modelMax = optomizedModel.maxXYZ_um;
LogOutput.Log("Generating layer parts...\n");
for (int volumeIndex = 0; volumeIndex < slicerList.Count; volumeIndex++)
{
storage.volumes.Add(new SliceVolumeStorage());
LayerPart.CreateLayerParts(storage.volumes[volumeIndex], slicerList[volumeIndex], config.repairOverlaps);
if (config.enableRaft)
{
//Add the raft offset to each layer.
for (int layerNr = 0; layerNr < storage.volumes[volumeIndex].layers.Count; layerNr++)
{
storage.volumes[volumeIndex].layers[layerNr].printZ += config.raftBaseThickness_um + config.raftInterfaceThicknes_um;
}
}
}
LogOutput.Log("Generated layer parts in {0:0.0}s\n".FormatWith(timeKeeper.Elapsed.Seconds));
timeKeeper.Restart();
}
private void processSliceData(SliceDataStorage storage)
{
if (config.continuousSpiralOuterPerimeter)
{
config.numberOfTopLayers = 0;
config.infillPercent = 0;
}
MultiVolumes.RemoveVolumesIntersections(storage.volumes);
MultiVolumes.OverlapMultipleVolumesSlightly(storage.volumes, config.multiVolumeOverlapPercent);
#if False
LayerPart.dumpLayerparts(storage, "output.html");
#endif
int totalLayers = storage.volumes[0].layers.Count;
#if DEBUG
for (int volumeIndex = 1; volumeIndex < storage.volumes.Count; volumeIndex++)
{
if (totalLayers != storage.volumes[volumeIndex].layers.Count)
{
throw new Exception("All the valumes must have the same number of layers (they just can have empty layers).");
}
}
#endif
for (int layerIndex = 0; layerIndex < totalLayers; layerIndex++)
{
for (int volumeIndex = 0; volumeIndex < storage.volumes.Count; volumeIndex++)
{
if (MatterSlice.Canceled)
{
return;
}
int insetCount = config.numberOfPerimeters;
if (config.continuousSpiralOuterPerimeter && (int)(layerIndex) < config.numberOfBottomLayers && layerIndex % 2 == 1)
{
//Add extra insets every 2 layers when spiralizing, this makes bottoms of cups watertight.
insetCount += 5;
}
SliceLayer layer = storage.volumes[volumeIndex].layers[layerIndex];
int extrusionWidth = config.extrusionWidth_um;
if (layerIndex == 0)
{
extrusionWidth = config.firstLayerExtrusionWidth_um;
}
Inset.generateInsets(layer, extrusionWidth, insetCount);
}
LogOutput.Log("Creating Insets {0}/{1}\n".FormatWith(layerIndex + 1, totalLayers));
}
if (config.wipeShieldDistanceFromShapes_um > 0)
{
CreateWipeShields(storage, totalLayers);
}
LogOutput.Log("Generated inset in {0:0.0}s\n".FormatWith(timeKeeper.Elapsed.Seconds));
timeKeeper.Restart();
for (int layerIndex = 0; layerIndex < totalLayers; layerIndex++)
{
if (MatterSlice.Canceled)
{
return;
}
//Only generate bottom and top layers and infill for the first X layers when spiralize is choosen.
if (!config.continuousSpiralOuterPerimeter || (int)(layerIndex) < config.numberOfBottomLayers)
{
for (int volumeIndex = 0; volumeIndex < storage.volumes.Count; volumeIndex++)
{
int extrusionWidth = config.extrusionWidth_um;
if (layerIndex == 0)
{
extrusionWidth = config.firstLayerExtrusionWidth_um;
}
TopsAndBottoms.GenerateTopAndBottom(layerIndex, storage.volumes[volumeIndex], extrusionWidth, config.numberOfBottomLayers, config.numberOfTopLayers);
}
}
LogOutput.Log("Creating Top & Bottom Layers {0}/{1}\n".FormatWith(layerIndex + 1, totalLayers));
}
LogOutput.Log("Generated top bottom layers in {0:0.0}s\n".FormatWith(timeKeeper.Elapsed.Seconds));
timeKeeper.Restart();
if (config.wipeTowerSize_um > 0)
{
Polygon p = new Polygon();
storage.wipeTower.Add(p);
p.Add(new IntPoint(storage.modelMin.x - 3000, storage.modelMax.y + 3000));
p.Add(new IntPoint(storage.modelMin.x - 3000, storage.modelMax.y + 3000 + config.wipeTowerSize_um));
p.Add(new IntPoint(storage.modelMin.x - 3000 - config.wipeTowerSize_um, storage.modelMax.y + 3000 + config.wipeTowerSize_um));
p.Add(new IntPoint(storage.modelMin.x - 3000 - config.wipeTowerSize_um, storage.modelMax.y + 3000));
storage.wipePoint = new IntPoint(storage.modelMin.x - 3000 - config.wipeTowerSize_um / 2, storage.modelMax.y + 3000 + config.wipeTowerSize_um / 2);
}
if (config.enableRaft)
{
Raft.GenerateRaftOutlines(storage, config.raftExtraDistanceAroundPart_um, config);
Skirt.generateSkirt(storage,
config.skirtDistance_um + config.raftBaseLineSpacing_um,
config.raftBaseLineSpacing_um,
config.numberOfSkirtLoops,
config.skirtMinLength_um,
config.raftBaseThickness_um, config);
}
else
{
Skirt.generateSkirt(storage,
config.skirtDistance_um,
config.firstLayerExtrusionWidth_um,
config.numberOfSkirtLoops,
config.skirtMinLength_um,
config.firstLayerThickness_um, config);
}
}
