protected override IEnumerator <PrinterSetupWizardPage> GetWizardSteps()
{
var probePositions = new List <ProbePosition>(levelingPlan.ProbeCount);
for (int j = 0; j < levelingPlan.ProbeCount; j++)
{
probePositions.Add(new ProbePosition());
}
var levelingStrings = new LevelingStrings(printer.Settings);
// If no leveling data has been calculated
bool showWelcomeScreen = printer.Settings.Helpers.GetPrintLevelingData().SampledPositions.Count == 0 &&
!ProbeCalibrationWizard.UsingZProbe(printer);
if (showWelcomeScreen)
{
yield return(new PrinterSetupWizardPage(
this,
levelingStrings.InitialPrinterSetupStepText,
string.Format(
"{0}\n\n{1}",
"Congratulations on connecting to your printer. Before starting your first print we need to run a simple calibration procedure.".Localize(),
"The next few screens will walk your through calibrating your printer.".Localize())));
}
bool hasHeatedBed = printer.Settings.GetValue <bool>(SettingsKey.has_heated_bed);
bool useZProbe = printer.Settings.Helpers.UseZProbe();
int zProbeSamples = printer.Settings.GetValue <int>(SettingsKey.z_probe_samples);
var secondsPerManualSpot = 10 * 3;
var secondsPerAutomaticSpot = 3 * zProbeSamples;
var secondsToCompleteWizard = levelingPlan.ProbeCount * (useZProbe ? secondsPerAutomaticSpot : secondsPerManualSpot);
secondsToCompleteWizard += (hasHeatedBed ? 60 * 3 : 0);
yield return(new PrinterSetupWizardPage(
this,
"Print Leveling Overview".Localize(),
levelingStrings.WelcomeText(levelingPlan.ProbeCount, (int)Math.Round(secondsToCompleteWizard / 60.0))));
yield return(new HomePrinterPage(
this,
"Homing The Printer".Localize(),
levelingStrings.HomingPageInstructions(useZProbe, hasHeatedBed),
useZProbe));
// figure out the heating requirements
double targetBedTemp = 0;
double targetHotendTemp = 0;
if (hasHeatedBed)
{
targetBedTemp = printer.Settings.GetValue <double>(SettingsKey.bed_temperature);
}
if (!useZProbe)
{
targetHotendTemp = printer.Settings.Helpers.ExtruderTemperature(0);
}
if (targetBedTemp > 0 || targetHotendTemp > 0)
{
string heatingInstructions = "";
if (targetBedTemp > 0 && targetHotendTemp > 0)
{
// heating both the bed and the hotend
heatingInstructions = "Waiting for the bed to heat to ".Localize() + targetBedTemp + "°C\n"
+ "and the hotend to heat to ".Localize() + targetHotendTemp + "°C.\n"
+ "\n"
+ "This will improve the accuracy of print leveling ".Localize()
+ "and ensure that no filament is stuck to your nozzle.".Localize() + "\n"
+ "\n"
+ "Warning! The tip of the nozzle will be HOT!".Localize() + "\n"
+ "Avoid contact with your skin.".Localize();
}
else if (targetBedTemp > 0)
{
// only heating the bed
heatingInstructions = "Waiting for the bed to heat to ".Localize() + targetBedTemp + "°C.\n"
+ "This will improve the accuracy of print leveling.".Localize();
}
else // targetHotendTemp > 0
{
// only heating the hotend
heatingInstructions += "Waiting for the hotend to heat to ".Localize() + targetHotendTemp + "°C.\n"
+ "This will ensure that no filament is stuck to your nozzle.".Localize() + "\n"
+ "\n"
+ "Warning! The tip of the nozzle will be HOT!".Localize() + "\n"
+ "Avoid contact with your skin.".Localize();
}
yield return(new WaitForTempPage(
this,
"Waiting For Printer To Heat".Localize(),
heatingInstructions,
targetBedTemp, targetHotendTemp));
}
double bedRadius = Math.Min(printer.Settings.GetValue <Vector2>(SettingsKey.bed_size).X, printer.Settings.GetValue <Vector2>(SettingsKey.bed_size).Y) / 2;
double startProbeHeight = printer.Settings.GetValue <double>(SettingsKey.print_leveling_probe_start);
int i = 0;
foreach (var goalProbePosition in levelingPlan.GetPrintLevelPositionToSample())
{
var validProbePosition = EnsureInPrintBounds(printer.Settings, goalProbePosition);
if (printer.Settings.Helpers.UseZProbe())
{
yield return(new AutoProbeFeedback(
this,
new Vector3(validProbePosition, startProbeHeight),
string.Format(
"{0} {1} {2} - {3}",
$"{"Step".Localize()} {i + 1} {"of".Localize()} {levelingPlan.ProbeCount}:",
"Position".Localize(),
i + 1,
"Auto Calibrate".Localize()),
probePositions,
i));
}
else
{
yield return(new GetCoarseBedHeight(
this,
new Vector3(validProbePosition, startProbeHeight),
string.Format(
"{0} {1} {2} - {3}",
levelingStrings.GetStepString(levelingPlan.TotalSteps),
"Position".Localize(),
i + 1,
"Low Precision".Localize()),
probePositions,
i,
levelingStrings));
yield return(new GetFineBedHeight(
this,
string.Format(
"{0} {1} {2} - {3}",
levelingStrings.GetStepString(levelingPlan.TotalSteps),
"Position".Localize(),
i + 1,
"Medium Precision".Localize()),
probePositions,
i,
levelingStrings));
yield return(new GetUltraFineBedHeight(
this,
string.Format(
"{0} {1} {2} - {3}",
levelingStrings.GetStepString(levelingPlan.TotalSteps),
"Position".Localize(),
i + 1,
"High Precision".Localize()),
probePositions,
i,
levelingStrings));
}
i++;
}
yield return(new LastPageInstructions(
this,
"Print Leveling Wizard".Localize(),
useZProbe,
probePositions));
}
protected override IEnumerator <WizardPage> GetPages()
{
var levelingStrings = new LevelingStrings();
// If no leveling data has been calculated
bool showWelcomeScreen = printer.Settings.Helpers.PrintLevelingData.SampledPositions.Count == 0 &&
!ProbeCalibrationWizard.UsingZProbe(printer);
if (showWelcomeScreen)
{
yield return(new WizardPage(
this,
"Initial Printer Setup".Localize(),
string.Format(
"{0}\n\n{1}",
"Congratulations on connecting to your printer. Before starting your first print we need to run a simple calibration procedure.".Localize(),
"The next few screens will walk your through calibrating your printer.".Localize()))
{
WindowTitle = Title
});
}
// Switch to raw mode and construct leveling structures
this.Initialize();
// var probePositions = new List<ProbePosition>(Enumerable.Range(0, levelingPlan.ProbeCount).Select(p => new ProbePosition()));
var probePositions = new List <ProbePosition>(levelingPlan.ProbeCount);
for (int j = 0; j < levelingPlan.ProbeCount; j++)
{
probePositions.Add(new ProbePosition());
}
bool hasHeatedBed = printer.Settings.GetValue <bool>(SettingsKey.has_heated_bed);
bool useZProbe = printer.Settings.Helpers.UseZProbe();
int zProbeSamples = printer.Settings.GetValue <int>(SettingsKey.z_probe_samples);
// Build welcome text for Print Leveling Overview page
string buildWelcomeText()
{
var secondsPerManualSpot = 10 * 3;
var secondsPerAutomaticSpot = 3 * zProbeSamples;
var secondsToCompleteWizard = levelingPlan.ProbeCount * (useZProbe ? secondsPerAutomaticSpot : secondsPerManualSpot);
secondsToCompleteWizard += (hasHeatedBed ? 60 * 3 : 0);
int numberOfSteps = levelingPlan.ProbeCount;
int numberOfMinutes = (int)Math.Round(secondsToCompleteWizard / 60.0);
if (hasHeatedBed)
{
return("{0}\n\n\t• {1}\n\t• {2}\n\t• {3}\n\t• {4}\n\t• {5}\n\n{6}\n\n{7}".FormatWith(
"Welcome to the print leveling wizard. Here is a quick overview on what we are going to do.".Localize(),
"Select the material you are printing".Localize(),
"Home the printer".Localize(),
"Heat the bed".Localize(),
"Sample the bed at {0} points".Localize().FormatWith(numberOfSteps),
"Turn auto leveling on".Localize(),
"We should be done in approximately {0} minutes.".Localize().FormatWith(numberOfMinutes),
"Click 'Next' to continue.".Localize()));
}
else
{
return("{0}\n\n\t• {1}\n\t• {2}\n\t• {3}\n\n{4}\n\n{5}".FormatWith(
"Welcome to the print leveling wizard. Here is a quick overview on what we are going to do.".Localize(),
"Home the printer".Localize(),
"Sample the bed at {0} points".Localize().FormatWith(numberOfSteps),
"Turn auto leveling on".Localize(),
"We should be done in approximately {0} minutes.".Localize().FormatWith(numberOfMinutes),
"Click 'Next' to continue.".Localize()));
}
}
yield return(new WizardPage(
this,
"Print Leveling Overview".Localize(),
buildWelcomeText())
{
WindowTitle = Title
});
yield return(new HomePrinterPage(
this,
"Homing The Printer".Localize(),
levelingStrings.HomingPageInstructions(useZProbe, hasHeatedBed),
useZProbe));
// if there is a level_x_carriage_markdown oem markdown page
if (!string.IsNullOrEmpty(printer.Settings.GetValue(SettingsKey.level_x_carriage_markdown)))
{
yield return(GetLevelXCarriagePage(this, printer));
}
// figure out the heating requirements
double targetBedTemp = 0;
double targetHotendTemp = 0;
if (hasHeatedBed)
{
targetBedTemp = printer.Settings.GetValue <double>(SettingsKey.bed_temperature);
}
if (!useZProbe)
{
targetHotendTemp = printer.Settings.Helpers.ExtruderTargetTemperature(0);
}
if (targetBedTemp > 0 || targetHotendTemp > 0)
{
string heatingInstructions = "";
if (targetBedTemp > 0 && targetHotendTemp > 0)
{
// heating both the bed and the hotend
heatingInstructions = "Waiting for the bed to heat to ".Localize() + targetBedTemp + "°C\n"
+ "and the hotend to heat to ".Localize() + targetHotendTemp + "°C.\n"
+ "\n"
+ "This will improve the accuracy of print leveling ".Localize()
+ "and ensure that no filament is stuck to your nozzle.".Localize() + "\n"
+ "\n"
+ "Warning! The tip of the nozzle will be HOT!".Localize() + "\n"
+ "Avoid contact with your skin.".Localize();
}
else if (targetBedTemp > 0)
{
// only heating the bed
heatingInstructions = "Waiting for the bed to heat to ".Localize() + targetBedTemp + "°C.\n"
+ "This will improve the accuracy of print leveling.".Localize();
}
else // targetHotendTemp > 0
{
// only heating the hotend
heatingInstructions += "Waiting for the hotend to heat to ".Localize() + targetHotendTemp + "°C.\n"
+ "This will ensure that no filament is stuck to your nozzle.".Localize() + "\n"
+ "\n"
+ "Warning! The tip of the nozzle will be HOT!".Localize() + "\n"
+ "Avoid contact with your skin.".Localize();
}
yield return(new WaitForTempPage(
this,
"Waiting For Printer To Heat".Localize(),
heatingInstructions,
targetBedTemp,
new double[] { targetHotendTemp }));
}
double bedRadius = Math.Min(printer.Settings.GetValue <Vector2>(SettingsKey.bed_size).X, printer.Settings.GetValue <Vector2>(SettingsKey.bed_size).Y) / 2;
double startProbeHeight = printer.Settings.GetValue <double>(SettingsKey.print_leveling_probe_start);
int i = 0;
var probePoints = levelingPlan.GetPrintLevelPositionToSample().ToList();
AutoProbePage autoProbePage = null;
if (printer.Settings.Helpers.UseZProbe())
{
autoProbePage = new AutoProbePage(this, printer, "Bed Detection", probePoints, probePositions);
yield return(autoProbePage);
}
else
{
foreach (var goalProbePoint in probePoints)
{
if (wizardExited)
{
// Make sure when the wizard is done we turn off the bed heating
printer.Connection.TurnOffBedAndExtruders(TurnOff.AfterDelay);
if (printer.Settings.GetValue <bool>(SettingsKey.z_homes_to_max))
{
printer.Connection.HomeAxis(PrinterConnection.Axis.XYZ);
}
yield break;
}
var validProbePosition = EnsureInPrintBounds(printer, goalProbePoint);
{
yield return(new GetCoarseBedHeight(
this,
new Vector3(validProbePosition, startProbeHeight),
string.Format(
"{0} {1} {2} - {3}",
levelingStrings.GetStepString(levelingPlan.TotalSteps),
"Position".Localize(),
i + 1,
"Low Precision".Localize()),
probePositions,
i,
levelingStrings));
yield return(new GetFineBedHeight(
this,
string.Format(
"{0} {1} {2} - {3}",
levelingStrings.GetStepString(levelingPlan.TotalSteps),
"Position".Localize(),
i + 1,
"Medium Precision".Localize()),
probePositions,
i,
levelingStrings));
yield return(new GetUltraFineBedHeight(
this,
string.Format(
"{0} {1} {2} - {3}",
levelingStrings.GetStepString(levelingPlan.TotalSteps),
"Position".Localize(),
i + 1,
"High Precision".Localize()),
probePositions,
i,
levelingStrings));
}
i++;
}
}
// if we are not using a z-probe, reset the baby stepping at the successful conclusion of leveling
if (!printer.Settings.GetValue <bool>(SettingsKey.use_z_probe))
{
// clear the baby stepping so we don't save the old values
babySteppingValue = 0;
}
yield return(new LastPageInstructions(
this,
"Print Leveling Wizard".Localize(),
useZProbe,
probePositions));
}