public static void SetPassword() //Dh
{
int err;
ConsoleKeyInfo passwrdConfig;
string soldPassword;
string snewPassword;
Console.WriteLine("What Type of Access Control Would You " +
"like to Set the Device to? \r\n0 : No Password \r\n" +
"1 : Enable the Password \r\n2 : Change the Password \r\n" +
"3: Permanent Lock");
passwrdConfig = Console.ReadKey();
if (passwrdConfig.Key == ConsoleKey.D0) // disable password
{
d1.AccessConfig = 0x00;
}
else if (passwrdConfig.Key == ConsoleKey.D1) // enable password
{
d1.AccessConfig = 0x40;
}
else if (passwrdConfig.Key == ConsoleKey.D2) // change password
{
d1.AccessConfig = 0xA5;
}
else if (passwrdConfig.Key == ConsoleKey.D2) // change password
{
Console.WriteLine("Are You Sure You Want to PERMANENTLY LOCK ALL SETTINGS on This Device");
if (Console.ReadKey().Key == ConsoleKey.Y)
{
d1.AccessConfig = 0xFF;
err = MCP2210.M_Mcp2210_SetPermanentLock(d1.Handle);
return; // handle the error
}
}
Console.WriteLine("Please Insert the Current Password. " +
"8 Characters Max \r\n" +
"Please input any 8 Character string if it currently does not have a password");
soldPassword = Console.ReadLine();
Console.WriteLine("Please Insert the New Password. 8 Characters Max");
snewPassword = Console.ReadLine();
err = MCP2210.M_Mcp2210_SetAccessControl(d1.Handle, d1.AccessConfig, soldPassword, snewPassword);
if (0 == err)
{
d1.sPassword = snewPassword;
}
else
{
PullbackException oops = new PullbackException();
oops.Mcp2210Error = err;
throw oops;
}
}
public static void GetGpioConfig() //8h
{
int err;
uint tempuinGpioVal = 0;
uint tempuinGpioDir = 0;
byte tempbRmtWkupEn = 0;
byte tempbPinMode = 0;
byte tempbSpiBusRelEn = 0;
ConsoleKeyInfo memType;
Console.WriteLine("Would you like to see GPIO settings for [1] NVRAM or [2] Volitile Memory \r\n");
memType = Console.ReadKey();
if (memType.Key == ConsoleKey.D1)
{
d1.bFgSelector = (byte)MCP2210.M_MCP2210_NVRAM_CONFIG;
}
else if (memType.Key == ConsoleKey.D2)
{
d1.bFgSelector = (byte)MCP2210.M_MCP2210_VM_CONFIG;
}
err = MCP2210.M_Mcp2210_GetGpioConfig(d1.Handle, d1.bFgSelector, d1.baGpSetting, ref tempuinGpioVal, ref tempuinGpioDir, ref tempbRmtWkupEn, ref tempbPinMode, ref tempbSpiBusRelEn);
Converter.CheckByteArray(d1.baGpSetting);
d1.uinGpioVal = tempuinGpioVal;
d1.uinGpioDir = tempuinGpioDir;
d1.bRmtWkupEn = tempbRmtWkupEn;
d1.bPinMode = tempbPinMode;
d1.bSpiBusRelEn = tempbSpiBusRelEn;
Console.WriteLine("The chosen indication is {0} \r\n", d1.uinGpioVal);
Console.WriteLine("The chosen direction is {0} \r\n", d1.uinGpioDir);
if (d1.bRmtWkupEn == (byte)MCP2210.M_MCP2210_REMOTE_WAKEUP_ENABLED)
{
Console.WriteLine("Remote Wake Up is Enabled");
}
else if (d1.bRmtWkupEn == (byte)MCP2210.M_MCP2210_REMOTE_WAKEUP_DISABLED)
{
Console.WriteLine("Remote Wake Up is Disabled");
}
if (d1.bPinMode == (byte)MCP2210.M_MCP2210_INT_MD_CNT_NONE)
{
Console.WriteLine("Interupt pin is Disabled");
}
else if (d1.bPinMode == (byte)MCP2210.M_MCP2210_INT_MD_CNT_HIGH_PULSES)
{
Console.WriteLine("Interrupt is High Pulse Triggered");
}
else if (d1.bPinMode == (byte)MCP2210.M_MCP2210_INT_MD_CNT_LOW_PULSES)
{
Console.WriteLine("Interrupt is Low Pulse Triggered");
}
else if (d1.bPinMode == (byte)MCP2210.M_MCP2210_INT_MD_CNT_RISING_EDGES)
{
Console.WriteLine("Interrupt is Rising Edge Triggered");
}
else if (d1.bPinMode == (byte)MCP2210.M_MCP2210_INT_MD_CNT_FALLING_EDGES)
{
Console.WriteLine("Interrupt is Falling Edge Triggered");
}
if (d1.bSpiBusRelEn == (byte)MCP2210.M_MCP2210_SPI_BUS_RELEASE_ENABLED)
{
Console.WriteLine("SPI Bus Release is Enabled");
}
if (d1.bSpiBusRelEn == (byte)MCP2210.M_MCP2210_SPI_BUS_RELEASE_DISABLED)
{
Console.WriteLine("SPI Bus Release is Disabled");
}
if (err != 0)
{
PullbackException oops = new PullbackException();
oops.Mcp2210Error = err;
throw oops;
}
Console.WriteLine("Error is {0}", err);
}
public static void SetGpioConfig() //7h
{
ConsoleKeyInfo memType;
ConsoleKeyInfo gpioTemp;
string temp_gp;
int err;
Console.WriteLine("Would you like to set the GPIO settings for [1] NVRAM or [2] Volitile Memory \r\n");
memType = Console.ReadKey();
if (memType.Key == ConsoleKey.D1)
{
d1.bFgSelector = (byte)MCP2210.M_MCP2210_NVRAM_CONFIG;
}
else if (memType.Key == ConsoleKey.D2)
{
d1.bFgSelector = (byte)MCP2210.M_MCP2210_VM_CONFIG;
}
Console.WriteLine("Please Indicate the GP Pin Designation in Hex Format, GP0 is First & GP8 is Last \r\n 00 : GPIO \r\n 01 : Chip Select \r\n 02 : Dedicated Pin Function \r\n ");
temp_gp = Console.ReadLine();
d1.baGpSetting = Converter.ToByteArray(temp_gp);
for (int i = 0; i < 9; i++)
{
Console.WriteLine("Please Indicate the Output Value of Pin GPIO{0} \r\n", i);
gpioTemp = Console.ReadKey();
if (gpioTemp.Key == ConsoleKey.D1)
{
d1.uinGpioVal += (uint)1 << i;
}
Console.WriteLine("\r\n");
}
Console.WriteLine("The chosen indication is {0} \r\n", d1.uinGpioVal);
for (int i = 0; i < 9; i++)
{
Console.WriteLine("Please Indicate the Direction of Pin GPIO{0}\r\n 1 is In, 0 is Out \r\n", i);
gpioTemp = Console.ReadKey();
if (gpioTemp.Key == ConsoleKey.D1)
{
d1.uinGpioDir += (uint)1 << i;
}
Console.WriteLine("\r\n");
}
Console.WriteLine("The chosen direction is {0}", d1.uinGpioDir);
Console.WriteLine("\r\n Would You Like the Device to Be Remote Wake Enababled [Y] or [N] /r/n");
gpioTemp = Console.ReadKey();
if (gpioTemp.Key == ConsoleKey.Y)
{
d1.bRmtWkupEn = (byte)MCP2210.M_MCP2210_REMOTE_WAKEUP_ENABLED;
}
if (gpioTemp.Key == ConsoleKey.N)
{
d1.bRmtWkupEn = (byte)MCP2210.M_MCP2210_REMOTE_WAKEUP_DISABLED;
}
Console.WriteLine("\r\n How would you like the interupt pin to count interupts, GP6 \r\n 0 : NONE \r\n 1 : High Pulses \r\n 2 : Low Pulses \r\n 3 : Rising Edges \r\n 4 : Falling Edges \r\n");
gpioTemp = Console.ReadKey();
if (gpioTemp.Key == ConsoleKey.D0)
{
d1.bPinMode = (byte)MCP2210.M_MCP2210_INT_MD_CNT_NONE;
}
else if (gpioTemp.Key == ConsoleKey.D1)
{
d1.bPinMode = (byte)MCP2210.M_MCP2210_INT_MD_CNT_HIGH_PULSES;
}
else if (gpioTemp.Key == ConsoleKey.D2)
{
d1.bPinMode = (byte)MCP2210.M_MCP2210_INT_MD_CNT_LOW_PULSES;
}
else if (gpioTemp.Key == ConsoleKey.D3)
{
d1.bPinMode = (byte)MCP2210.M_MCP2210_INT_MD_CNT_RISING_EDGES;
}
else if (gpioTemp.Key == ConsoleKey.D4)
{
d1.bPinMode = (byte)MCP2210.M_MCP2210_INT_MD_CNT_FALLING_EDGES;
}
Console.WriteLine("\r\n Would you like your device to release the SPI Bus to another master when not broadcasting [Y] or [N] \r\n");
gpioTemp = Console.ReadKey();
if (gpioTemp.Key == ConsoleKey.Y)
{
d1.bSpiBusRelEn = (byte)MCP2210.M_MCP2210_SPI_BUS_RELEASE_ENABLED;
}
if (gpioTemp.Key == ConsoleKey.N)
{
d1.bSpiBusRelEn = (byte)MCP2210.M_MCP2210_SPI_BUS_RELEASE_DISABLED;
}
err = MCP2210.M_Mcp2210_SetGpioConfig(d1.Handle, d1.bFgSelector, d1.baGpSetting, d1.uinGpioVal, d1.uinGpioDir, d1.bRmtWkupEn, d1.bPinMode, d1.bSpiBusRelEn);
if (err != 0)
{
PullbackException oops = new PullbackException();
oops.Mcp2210Error = err;
throw oops;
}
Console.WriteLine("\r\n Error is {0}", err);
}