private RawTOCEntry EmitRawTOCEntry(ATOCEntry entry)
{
BCD2 tno, ino;
//this should actually be zero. im not sure if this is stored as BCD2 or not
tno = BCD2.FromDecimal(entry.TrackNo);
//these are special values.. I think, taken from this:
//http://www.staff.uni-mainz.de/tacke/scsi/SCSI2-14.html
//the CCD will contain Points as decimal values except for these specially converted decimal values which should stay as BCD.
//Why couldn't they all be BCD? I don't know. I guess because BCD is inconvenient, but only A0 and friends have special meaning. It's confusing.
ino = BCD2.FromDecimal(entry.Point);
if (entry.Point == 0xA0)
{
ino.BCDValue = 0xA0;
}
else if (entry.Point == 0xA1)
{
ino.BCDValue = 0xA1;
}
else if (entry.Point == 0xA2)
{
ino.BCDValue = 0xA2;
}
// get ADR & Control from ADR_Control byte
byte adrc = Convert.ToByte(entry.ADR_Control);
var Control = adrc & 0x0F;
var ADR = adrc >> 4;
var q = new SubchannelQ
{
q_status = SubchannelQ.ComputeStatus(ADR, (EControlQ)(Control & 0xF)),
q_tno = tno,
q_index = ino,
min = BCD2.FromDecimal(entry.AMin),
sec = BCD2.FromDecimal(entry.ASec),
frame = BCD2.FromDecimal(entry.AFrame),
zero = (byte)entry.Zero,
ap_min = BCD2.FromDecimal(entry.PMin),
ap_sec = BCD2.FromDecimal(entry.PSec),
ap_frame = BCD2.FromDecimal(entry.PFrame),
q_crc = 0, //meaningless
};
return(new RawTOCEntry {
QData = q
});
}
/// <exception cref="MDSParseException">no file found at <paramref name="mdsPath"/> or BLOB error</exception>
public Disc LoadMDSToDisc(string mdsPath, DiscMountPolicy IN_DiscMountPolicy)
{
var loadResults = LoadMDSPath(mdsPath);
if (!loadResults.Valid)
{
throw loadResults.FailureException;
}
Disc disc = new Disc();
// load all blobs
Dictionary <int, IBlob> BlobIndex = MountBlobs(loadResults.ParsedMDSFile, disc);
var mdsf = loadResults.ParsedMDSFile;
//generate DiscTOCRaw items from the ones specified in the MDS file
disc.RawTOCEntries = new List <RawTOCEntry>();
foreach (var entry in mdsf.TOCEntries)
{
disc.RawTOCEntries.Add(EmitRawTOCEntry(entry));
}
//analyze the RAWTocEntries to figure out what type of track track 1 is
var tocSynth = new Synthesize_DiscTOC_From_RawTOCEntries_Job(disc.RawTOCEntries);
tocSynth.Run();
// now build the sectors
int currBlobIndex = 0;
foreach (var session in mdsf.ParsedSession)
{
for (int i = session.StartTrack; i <= session.EndTrack; i++)
{
int relMSF = -1;
var track = mdsf.TOCEntries.FirstOrDefault(t => t.Point == i);
if (track == null)
{
break;
}
// ignore the info entries
if (track.Point == 0xA0 ||
track.Point == 0xA1 ||
track.Point == 0xA2)
{
continue;
}
// get the blob(s) for this track
// it's probably a safe assumption that there will be only one blob per track, but I'm still not 100% sure on this
var tr = mdsf.TOCEntries.FirstOrDefault(a => a.Point == i) ?? throw new MDSParseException("BLOB Error!");
#if true
if (tr.ImageFileNamePaths.Count == 0)
{
throw new MDSParseException("BLOB Error!");
}
#else // this is the worst use of lists and LINQ I've seen in this god-forsaken codebase, I hope for all our sakes that it's not a workaround for some race condition --yoshi
List <string> blobstrings = new List <string>();
foreach (var t in tr.ImageFileNamePaths)
{
if (!blobstrings.Contains(t))
{
blobstrings.Add(t);
}
}
var tBlobs = (from a in tr.ImageFileNamePaths
select a).ToList();
if (tBlobs.Count < 1)
{
throw new MDSParseException("BLOB Error!");
}
// is the currBlob valid for this track, or do we need to increment?
string bString = tBlobs.First();
#endif
IBlob mdfBlob = null;
// check for track pregap and create if necessary
// this is specified in the track extras block
if (track.ExtraBlock.Pregap > 0)
{
CUE.CueTrackType pregapTrackType = CUE.CueTrackType.Audio;
if (tocSynth.Result.TOCItems[1].IsData)
{
if (tocSynth.Result.Session1Format == SessionFormat.Type20_CDXA)
{
pregapTrackType = CUE.CueTrackType.Mode2_2352;
}
else if (tocSynth.Result.Session1Format == SessionFormat.Type10_CDI)
{
pregapTrackType = CUE.CueTrackType.CDI_2352;
}
else if (tocSynth.Result.Session1Format == SessionFormat.Type00_CDROM_CDDA)
{
pregapTrackType = CUE.CueTrackType.Mode1_2352;
}
}
for (int pre = 0; pre < track.ExtraBlock.Pregap; pre++)
{
relMSF++;
var ss_gap = new CUE.SS_Gap()
{
Policy = IN_DiscMountPolicy,
TrackType = pregapTrackType
};
disc._Sectors.Add(ss_gap);
int qRelMSF = pre - Convert.ToInt32(track.ExtraBlock.Pregap);
//tweak relMSF due to ambiguity/contradiction in yellowbook docs
if (!IN_DiscMountPolicy.CUE_PregapContradictionModeA)
{
qRelMSF++;
}
//setup subQ
byte ADR = 1; //absent some kind of policy for how to set it, this is a safe assumption:
ss_gap.sq.SetStatus(ADR, tocSynth.Result.TOCItems[1].Control);
ss_gap.sq.q_tno = BCD2.FromDecimal(1);
ss_gap.sq.q_index = BCD2.FromDecimal(0);
ss_gap.sq.AP_Timestamp = pre;
ss_gap.sq.Timestamp = qRelMSF;
//setup subP
ss_gap.Pause = true;
}
// pregap processing completed
}
// create track sectors
long currBlobOffset = track.TrackOffset;
for (long sector = session.StartSector; sector <= session.EndSector; sector++)
{
CUE.SS_Base sBase = null;
// get the current blob from the BlobIndex
Blob_RawFile currBlob = (Blob_RawFile)BlobIndex[currBlobIndex];
long currBlobLength = currBlob.Length;
long currBlobPosition = sector;
if (currBlobPosition == currBlobLength)
{
currBlobIndex++;
}
mdfBlob = disc.DisposableResources[currBlobIndex] as Blob_RawFile;
//int userSector = 2048;
switch (track.SectorSize)
{
case 2448:
sBase = new CUE.SS_2352()
{
Policy = IN_DiscMountPolicy
};
//userSector = 2352;
break;
case 2048:
default:
sBase = new CUE.SS_Mode1_2048()
{
Policy = IN_DiscMountPolicy
};
//userSector = 2048;
break;
//throw new Exception($"Not supported: Sector Size {track.SectorSize}");
}
// configure blob
sBase.Blob = mdfBlob;
sBase.BlobOffset = currBlobOffset;
currBlobOffset += track.SectorSize; // userSector;
// add subchannel data
relMSF++;
BCD2 tno, ino;
//this should actually be zero. im not sure if this is stored as BCD2 or not
tno = BCD2.FromDecimal(track.TrackNo);
//these are special values.. I think, taken from this:
//http://www.staff.uni-mainz.de/tacke/scsi/SCSI2-14.html
//the CCD will contain Points as decimal values except for these specially converted decimal values which should stay as BCD.
//Why couldn't they all be BCD? I don't know. I guess because BCD is inconvenient, but only A0 and friends have special meaning. It's confusing.
ino = BCD2.FromDecimal(track.Point);
if (track.Point == 0xA0)
{
ino.BCDValue = 0xA0;
}
else if (track.Point == 0xA1)
{
ino.BCDValue = 0xA1;
}
else if (track.Point == 0xA2)
{
ino.BCDValue = 0xA2;
}
// get ADR & Control from ADR_Control byte
byte adrc = Convert.ToByte(track.ADR_Control);
var Control = adrc & 0x0F;
var ADR = adrc >> 4;
var q = new SubchannelQ
{
q_status = SubchannelQ.ComputeStatus(ADR, (EControlQ)(Control & 0xF)),
q_tno = BCD2.FromDecimal(track.Point),
q_index = ino,
AP_Timestamp = disc._Sectors.Count,
Timestamp = relMSF - Convert.ToInt32(track.ExtraBlock.Pregap)
};
sBase.sq = q;
disc._Sectors.Add(sBase);
}
}
}
return(disc);
}
/// <exception cref="CCDParseException">file <paramref name="ccdPath"/> not found, nonexistent IMG file, nonexistent SUB file, IMG or SUB file not multiple of <c>2352 B</c>, or IMG and SUB files differ in length</exception>
public Disc LoadCCDToDisc(string ccdPath, DiscMountPolicy IN_DiscMountPolicy)
{
var loadResults = LoadCCDPath(ccdPath);
if (!loadResults.Valid)
{
throw loadResults.FailureException;
}
Disc disc = new Disc();
IBlob imgBlob = null, subBlob = null;
long imgLen = -1, subLen;
//mount the IMG file
//first check for a .ecm in place of the img
var imgPath = loadResults.ImgPath;
if (!File.Exists(imgPath))
{
var ecmPath = Path.ChangeExtension(imgPath, ".img.ecm");
if (File.Exists(ecmPath))
{
if (Disc.Blob_ECM.IsECM(ecmPath))
{
var ecm = new Disc.Blob_ECM();
ecm.Load(ecmPath);
imgBlob = ecm;
imgLen = ecm.Length;
}
}
}
if (imgBlob == null)
{
if (!File.Exists(loadResults.ImgPath))
{
throw new CCDParseException("Malformed CCD format: nonexistent IMG file!");
}
var imgFile = new Disc.Blob_RawFile()
{
PhysicalPath = loadResults.ImgPath
};
imgLen = imgFile.Length;
imgBlob = imgFile;
}
disc.DisposableResources.Add(imgBlob);
//mount the SUB file
if (!File.Exists(loadResults.SubPath))
{
throw new CCDParseException("Malformed CCD format: nonexistent SUB file!");
}
var subFile = new Disc.Blob_RawFile()
{
PhysicalPath = loadResults.SubPath
};
subBlob = subFile;
disc.DisposableResources.Add(subBlob);
subLen = subFile.Length;
//quick integrity check of file sizes
if (imgLen % 2352 != 0)
{
throw new CCDParseException("Malformed CCD format: IMG file length not multiple of 2352");
}
int NumImgSectors = (int)(imgLen / 2352);
if (subLen != NumImgSectors * 96)
{
throw new CCDParseException("Malformed CCD format: SUB file length not matching IMG");
}
var ccdf = loadResults.ParsedCCDFile;
//the only instance of a sector synthesizer we'll need
SS_CCD synth = new SS_CCD();
//generate DiscTOCRaw items from the ones specified in the CCD file
//TODO - range validate these (too many truncations to byte)
disc.RawTOCEntries = new List <RawTOCEntry>();
foreach (var entry in ccdf.TOCEntries)
{
BCD2 tno, ino;
//this should actually be zero. im not sure if this is stored as BCD2 or not
tno = BCD2.FromDecimal(entry.TrackNo);
//these are special values.. I think, taken from this:
//http://www.staff.uni-mainz.de/tacke/scsi/SCSI2-14.html
//the CCD will contain Points as decimal values except for these specially converted decimal values which should stay as BCD.
//Why couldn't they all be BCD? I don't know. I guess because BCD is inconvenient, but only A0 and friends have special meaning. It's confusing.
ino = BCD2.FromDecimal(entry.Point);
if (entry.Point == 0xA0)
{
ino.BCDValue = 0xA0;
}
else if (entry.Point == 0xA1)
{
ino.BCDValue = 0xA1;
}
else if (entry.Point == 0xA2)
{
ino.BCDValue = 0xA2;
}
var q = new SubchannelQ
{
q_status = SubchannelQ.ComputeStatus(entry.ADR, (EControlQ)(entry.Control & 0xF)),
q_tno = tno,
q_index = ino,
min = BCD2.FromDecimal(entry.AMin),
sec = BCD2.FromDecimal(entry.ASec),
frame = BCD2.FromDecimal(entry.AFrame),
zero = (byte)entry.Zero,
ap_min = BCD2.FromDecimal(entry.PMin),
ap_sec = BCD2.FromDecimal(entry.PSec),
ap_frame = BCD2.FromDecimal(entry.PFrame),
q_crc = 0, //meaningless
};
disc.RawTOCEntries.Add(new RawTOCEntry {
QData = q
});
}
//analyze the RAWTocEntries to figure out what type of track track 1 is
var tocSynth = new Synthesize_DiscTOC_From_RawTOCEntries_Job()
{
Entries = disc.RawTOCEntries
};
tocSynth.Run();
//Add sectors for the mandatory track 1 pregap, which isn't stored in the CCD file
//We reuse some CUE code for this.
//If we load other formats later we might should abstract this even further (to a synthesizer job)
//It can't really be abstracted from cue files though due to the necessity of merging this with other track 1 pregaps
CUE.CueTrackType pregapTrackType = CUE.CueTrackType.Audio;
if (tocSynth.Result.TOCItems[1].IsData)
{
if (tocSynth.Result.Session1Format == SessionFormat.Type20_CDXA)
{
pregapTrackType = CUE.CueTrackType.Mode2_2352;
}
else if (tocSynth.Result.Session1Format == SessionFormat.Type10_CDI)
{
pregapTrackType = CUE.CueTrackType.CDI_2352;
}
else if (tocSynth.Result.Session1Format == SessionFormat.Type00_CDROM_CDDA)
{
pregapTrackType = CUE.CueTrackType.Mode1_2352;
}
}
for (int i = 0; i < 150; i++)
{
var ss_gap = new CUE.SS_Gap()
{
Policy = IN_DiscMountPolicy,
TrackType = pregapTrackType
};
disc._Sectors.Add(ss_gap);
int qRelMSF = i - 150;
//tweak relMSF due to ambiguity/contradiction in yellowbook docs
if (!IN_DiscMountPolicy.CUE_PregapContradictionModeA)
{
qRelMSF++;
}
//setup subQ
byte ADR = 1; //absent some kind of policy for how to set it, this is a safe assumption:
ss_gap.sq.SetStatus(ADR, tocSynth.Result.TOCItems[1].Control);
ss_gap.sq.q_tno = BCD2.FromDecimal(1);
ss_gap.sq.q_index = BCD2.FromDecimal(0);
ss_gap.sq.AP_Timestamp = i;
ss_gap.sq.Timestamp = qRelMSF;
//setup subP
ss_gap.Pause = true;
}
//build the sectors:
//set up as many sectors as we have img/sub for, even if the TOC doesnt reference them
//(the TOC is unreliable, and the Track records are redundant)
for (int i = 0; i < NumImgSectors; i++)
{
disc._Sectors.Add(synth);
}
return(disc);
}
void RunMednaDisc()
{
var disc = new Disc();
OUT_Disc = disc;
//create a MednaDisc and give it to the disc for ownership
var md = new MednaDisc(IN_FromPath);
disc.DisposableResources.Add(md);
//"length of disc" for bizhawk's purposes (NOT a robust concept!) is determined by beginning of leadout track
var m_leadoutTrack = md.TOCTracks[100];
int nSectors = (int)m_leadoutTrack.lba;
//make synth param memos
disc.SynthParams.MednaDisc = md;
//this is the sole sector synthesizer we'll need
var synth = new SS_MednaDisc();
OUT_Disc.SynthProvider = new SimpleSectorSynthProvider()
{
SS = synth
};
//ADR (q-Mode) is necessarily 0x01 for a RawTOCEntry
const int kADR = 1;
const int kUnknownControl = 0;
//mednafen delivers us what is essentially but not exactly (or completely) a TOCRaw.
//we need to synth RawTOCEntries from this and then turn it into a proper TOCRaw
//when coming from mednafen, there are 101 entries.
//entry[0] is placeholder junk, not to be used
//entry[100] is the leadout track (A0)
//A1 and A2 are in the form of FirstRecordedTrackNumber and LastRecordedTrackNumber
for (int i = 1; i < 101; i++)
{
var m_te = md.TOCTracks[i];
//dont add invalid (absent) items
if (!m_te.Valid)
{
continue;
}
var m_ts = new Timestamp((int)m_te.lba + 150); //these are supposed to be absolute timestamps
var q = new SubchannelQ
{
q_status = SubchannelQ.ComputeStatus(kADR, (EControlQ)m_te.control),
q_tno = BCD2.FromDecimal(0), //unknown with mednadisc
q_index = BCD2.FromDecimal(i),
min = BCD2.FromDecimal(0), //unknown with mednadisc
sec = BCD2.FromDecimal(0), //unknown with mednadisc
frame = BCD2.FromDecimal(0), //unknown with mednadisc
zero = 0, //unknown with mednadisc
ap_min = BCD2.FromDecimal(m_ts.MIN),
ap_sec = BCD2.FromDecimal(m_ts.SEC),
ap_frame = BCD2.FromDecimal(m_ts.FRAC),
q_crc = 0 //meaningless
};
//a special fixup: mednafen's entry 100 is the lead-out track, so change it into the A2 raw toc entry
if (i == 100)
{
q.q_index.BCDValue = 0xA2;
}
disc.RawTOCEntries.Add(new RawTOCEntry {
QData = q
});
}
//synth A0 and A1 entries (indicating first and last recorded tracks and also session type)
var qA0 = new SubchannelQ
{
q_status = SubchannelQ.ComputeStatus(kADR, kUnknownControl),
q_tno = BCD2.FromDecimal(0), //unknown with mednadisc
q_index = BCD2.FromBCD(0xA0),
min = BCD2.FromDecimal(0), //unknown with mednadisc
sec = BCD2.FromDecimal(0), //unknown with mednadisc
frame = BCD2.FromDecimal(0), //unknown with mednadisc
zero = 0, //unknown with mednadisc
ap_min = BCD2.FromDecimal(md.TOC.first_track),
ap_sec = BCD2.FromDecimal(md.TOC.disc_type),
ap_frame = BCD2.FromDecimal(0),
q_crc = 0, //meaningless
};
disc.RawTOCEntries.Add(new RawTOCEntry {
QData = qA0
});
var qA1 = new SubchannelQ
{
q_status = SubchannelQ.ComputeStatus(kADR, kUnknownControl),
q_tno = BCD2.FromDecimal(0), //unknown with mednadisc
q_index = BCD2.FromBCD(0xA1),
min = BCD2.FromDecimal(0), //unknown with mednadisc
sec = BCD2.FromDecimal(0), //unknown with mednadisc
frame = BCD2.FromDecimal(0), //unknown with mednadisc
zero = 0, //unknown with mednadisc
ap_min = BCD2.FromDecimal(md.TOC.last_track),
ap_sec = BCD2.FromDecimal(0),
ap_frame = BCD2.FromDecimal(0),
q_crc = 0, //meaningless
};
disc.RawTOCEntries.Add(new RawTOCEntry {
QData = qA1
});
}
/// <summary>
/// Creates the subcode (really, just subchannel Q) for this disc from its current TOC.
/// Depends on the TOCPoints existing in the structure
/// TODO - do we need a fully 0xFF P-subchannel for PSX?
/// </summary>
void Synthesize_SubcodeFromStructure()
{
int aba = 0;
int dpIndex = 0;
//TODO - from mednafen (on PC-FX chip chan kick)
//If we're more than 2 seconds(150 sectors) from the real "start" of the track/INDEX 01, and the track is a data track,
//and the preceding track is an audio track, encode it as audio(by taking the SubQ control field from the preceding
//NOTE: discs may have subcode which is nonsense or possibly not recoverable from a sensible disc structure.
//but this function does what it says.
//SO: heres the main idea of how this works.
//we have the Structure.Points (whose name we dont like) which is a list of sectors where the tno/index changes.
//So for each sector, we see if we've advanced to the next point.
//TODO - check if this is synthesized correctly when producing a structure from a TOCRaw
while (aba < Sectors.Count)
{
if (dpIndex < Structure.Points.Count - 1)
{
while (aba >= Structure.Points[dpIndex + 1].ABA)
{
dpIndex++;
}
}
var dp = Structure.Points[dpIndex];
var se = Sectors[aba];
EControlQ control = dp.Control;
bool pause = true;
if (dp.Num != 0) //TODO - shouldnt this be IndexNum?
{
pause = false;
}
if ((dp.Control & EControlQ.DataUninterrupted) != 0)
{
pause = false;
}
int adr = dp.ADR;
SubchannelQ sq = new SubchannelQ();
sq.q_status = SubchannelQ.ComputeStatus(adr, control);
sq.q_tno = BCD2.FromDecimal(dp.TrackNum).BCDValue;
sq.q_index = BCD2.FromDecimal(dp.IndexNum).BCDValue;
int track_relative_aba = aba - dp.Track.Indexes[1].aba;
track_relative_aba = Math.Abs(track_relative_aba);
Timestamp track_relative_timestamp = new Timestamp(track_relative_aba);
sq.min = BCD2.FromDecimal(track_relative_timestamp.MIN);
sq.sec = BCD2.FromDecimal(track_relative_timestamp.SEC);
sq.frame = BCD2.FromDecimal(track_relative_timestamp.FRAC);
sq.zero = 0;
Timestamp absolute_timestamp = new Timestamp(aba);
sq.ap_min = BCD2.FromDecimal(absolute_timestamp.MIN);
sq.ap_sec = BCD2.FromDecimal(absolute_timestamp.SEC);
sq.ap_frame = BCD2.FromDecimal(absolute_timestamp.FRAC);
var bss = new BufferedSubcodeSector();
bss.Synthesize_SubchannelQ(ref sq, true);
//TEST: need this for psx?
if (pause)
{
bss.Synthesize_SubchannelP(true);
}
se.SubcodeSector = bss;
aba++;
}
}
/// <summary>
/// Loads a CCD at the specified path to a Disc object
/// </summary>
public Disc LoadCCDToDisc(string ccdPath)
{
var loadResults = LoadCCDPath(ccdPath);
if (!loadResults.Valid)
{
throw loadResults.FailureException;
}
Disc disc = new Disc();
var ccdf = loadResults.ParsedCCDFile;
var imgBlob = new Disc.Blob_RawFile()
{
PhysicalPath = loadResults.ImgPath
};
var subBlob = new Disc.Blob_RawFile()
{
PhysicalPath = loadResults.SubPath
};
disc.Blobs.Add(imgBlob);
disc.Blobs.Add(subBlob);
//generate DiscTOCRaw items from the ones specified in the CCD file
//TODO - range validate these (too many truncations to byte)
disc.RawTOCEntries = new List <RawTOCEntry>();
BufferedSubcodeSector bss = new BufferedSubcodeSector();
foreach (var entry in ccdf.TOCEntries)
{
var q = new SubchannelQ
{
q_status = SubchannelQ.ComputeStatus(entry.ADR, (EControlQ)(entry.Control & 0xF)),
q_tno = (byte)entry.TrackNo,
q_index = (byte)entry.Point,
min = BCD2.FromDecimal(entry.AMin),
sec = BCD2.FromDecimal(entry.ASec),
frame = BCD2.FromDecimal(entry.AFrame),
zero = (byte)entry.Zero,
ap_min = BCD2.FromDecimal(entry.PMin),
ap_sec = BCD2.FromDecimal(entry.PSec),
ap_frame = BCD2.FromDecimal(entry.PFrame),
};
//CRC cant be calculated til we've got all the fields setup
q.q_crc = bss.Synthesize_SubchannelQ(ref q, true);
disc.RawTOCEntries.Add(new RawTOCEntry {
QData = q
});
}
//generate the toc from the entries
var tocSynth = new DiscTOCRaw.SynthesizeFromRawTOCEntriesJob()
{
Entries = disc.RawTOCEntries
};
tocSynth.Run();
disc.TOCRaw = tocSynth.Result;
//synthesize DiscStructure
var structureSynth = new DiscStructure.SynthesizeFromDiscTOCRawJob()
{
TOCRaw = disc.TOCRaw
};
structureSynth.Run();
disc.Structure = structureSynth.Result;
//I *think* implicitly there is an index 0.. at.. i dunno, 0 maybe, for track 1
{
var dsi0 = new DiscStructure.Index();
dsi0.LBA = 0;
dsi0.Number = 0;
disc.Structure.Sessions[0].Tracks[0].Indexes.Add(dsi0);
}
//now, how to get the track types for the DiscStructure?
//1. the CCD tells us (somehow the reader has judged)
//2. scan it out of the Q subchannel
//lets choose1.
//TODO - better consider how to handle the situation where we have havent received all the [TRACK] items we need
foreach (var st in disc.Structure.Sessions[0].Tracks)
{
var ccdt = ccdf.TracksByNumber[st.Number];
switch (ccdt.Mode)
{
case 0:
st.TrackType = ETrackType.Audio; //for CCD, this means audio, apparently.
break;
case 1:
st.TrackType = ETrackType.Mode1_2352;
break;
case 2:
st.TrackType = ETrackType.Mode2_2352;
break;
default:
throw new InvalidOperationException("Unsupported CCD mode");
}
//add indexes for this track
foreach (var ccdi in ccdt.Indexes)
{
var dsi = new DiscStructure.Index();
//if (ccdi.Key == 0) continue;
dsi.LBA = ccdi.Value;
dsi.Number = ccdi.Key;
st.Indexes.Add(dsi);
}
}
//add sectors for the lead-in, which isn't stored in the CCD file, I think
//TODO - synthesize lead-in sectors from TOC, if the lead-in isn't available.
//need a test case for that though.
var leadin_sector_zero = new Sector_Zero();
var leadin_subcode_zero = new ZeroSubcodeSector();
for (int i = 0; i < 150; i++)
{
var se = new SectorEntry(leadin_sector_zero);
disc.Sectors.Add(se);
se.SubcodeSector = leadin_subcode_zero;
}
//build the sectors:
//set up as many sectors as we have img/sub for, even if the TOC doesnt reference them (TOC is unreliable, although the tracks should have covered it all)
for (int i = 0; i < loadResults.NumImgSectors; i++)
{
var isec = new Sector_RawBlob();
isec.Offset = ((long)i) * 2352;
isec.Blob = imgBlob;
var se = new SectorEntry(isec);
disc.Sectors.Add(se);
var scsec = new BlobSubcodeSectorPreDeinterleaved();
scsec.Offset = ((long)i) * 96;
scsec.Blob = subBlob;
se.SubcodeSector = scsec;
}
return(disc);
}
