public void SetRotationAboutEye(double x, double y, double z)
{
msgMatrix matx = new msgMatrix();
msgVectorStruct LookAtPos = new msgVectorStruct();
matx.Rotate(zero_p, x_axe, x / 180.0 * Math.PI);
matx.Rotate(zero_p, z_axe, -z / 180.0 * Math.PI);
LookAtPos.x = 0.0;
LookAtPos.y = m_fFocalLength;
LookAtPos.z = 0.0;
matx.ApplyMatrixToVector(zero_p, LookAtPos);
m_fLookAtPos.x = m_fEyePos.x + LookAtPos.x;
m_fLookAtPos.y = m_fEyePos.y + LookAtPos.y;
m_fLookAtPos.z = m_fEyePos.z + LookAtPos.z;
// Calculate our camera's UpVector using ONLY the 'X' (Pitch) and 'Z' (Yaw)
// parameters
m_fUpVector = z_axe;
matx.ApplyMatrixToVector(zero_p, m_fUpVector);
// Just save the 'y' value for later use when calculating the camera's 'Up' vector
// prior to calling gluLookAt()
m_fRoll = y;
}
private void PrepareMatrix(double Ox, double Oy, double Oz,
double Rx, double Ry, double Rz,
double Tx, double Ty, double Tz,
ref msgMatrix XForm)
{
XForm.Identity();
msgVectorStruct TransV = new msgVectorStruct();
TransV.x = Tx;
TransV.y = Ty;
TransV.z = Tz;
XForm.Translate(TransV);
XForm.Rotate(zero_p, x_axe, Rx);
XForm.Rotate(zero_p, y_axe, Ry);
XForm.Rotate(zero_p, z_axe, Rz);
msgVectorStruct oV = new msgVectorStruct();
oV.x = Ox;
oV.y = Oy;
oV.z = Oz;
XForm.Translate(oV);
}
public void GetInvRotationMatrix(ref msgMatrix XformMatrix)
{
PrepareInvMatrix(0.0f, 0.0f, 0.0f, // Origin
-m_fPitch, m_fRoll, m_fYaw, // Rotation
0.0f, 0.0f, 0.0f, // Translation
ref XformMatrix);
}
public void CalculateUpVector()
{
msgMatrix matx = new msgMatrix();
matx.Rotate(zero_p, x_axe, m_fPitch / 180.0 * Math.PI);
matx.Rotate(zero_p, z_axe, -m_fYaw / 180.0 * Math.PI);
m_fUpVector = z_axe;
matx.ApplyMatrixToVector(zero_p, m_fUpVector);
}
public void PositionCamera()
{
if (m_bResetClippingPlanes)
{
// Reset our cameras clipping plane
ResetView(0, 0);
m_bResetClippingPlanes = false;
}
if (m_fRoll != 0)
{
msgMatrix matx = new msgMatrix();
msgVectorStruct UpVector;
matx.Rotate(zero_p, x_axe, m_fPitch / 180.0 * Math.PI);
matx.Rotate(zero_p, y_axe, m_fRoll / 180.0 * Math.PI);
matx.Rotate(zero_p, z_axe, -m_fYaw / 180.0 * Math.PI);
UpVector = z_axe;
matx.ApplyMatrixToVector(zero_p, UpVector);
// Position the camera using the newly calculated 'Up' vector
OpenGLControl.gluLookAt(m_fEyePos.x, m_fEyePos.y, m_fEyePos.z,
m_fLookAtPos.x, m_fLookAtPos.y, m_fLookAtPos.z,
UpVector.x, UpVector.y, UpVector.z);
}
else
{
// Since our 'Up' vector has already been calculated, all we need to do is
// position the camera..
OpenGLControl.gluLookAt(m_fEyePos.x, m_fEyePos.y, m_fEyePos.z,
m_fLookAtPos.x, m_fLookAtPos.y, m_fLookAtPos.z,
m_fUpVector.x, m_fUpVector.y, m_fUpVector.z);
}
// Save the Model view matrix. This is used later for
// conversion of mouse coordinates to world coordinates.
OpenGLControl.glGetDoublev(OpenGLControl.GL_MODELVIEW_MATRIX, m_dModelViewMatrix);
}
public void SetRotationAboutLookAt(double x, double y, double z)
{
msgMatrix matx = new msgMatrix();
msgVectorStruct EyePos = new msgVectorStruct();
matx.Rotate(zero_p, x_axe, x / 180.0 * Math.PI);
matx.Rotate(zero_p, z_axe, -z / 180.0 * Math.PI);
EyePos.x = 0.0;
EyePos.y = -m_fFocalLength;
EyePos.z = 0.0;
matx.ApplyMatrixToVector(zero_p, EyePos);
m_fEyePos.x = EyePos.x + m_fLookAtPos.x;
m_fEyePos.y = EyePos.y + m_fLookAtPos.y;
m_fEyePos.z = EyePos.z + m_fLookAtPos.z;
// Calculate our camera's UpVector using ONLY the 'X' (Pitch) and 'Z' (Yaw)
// parameters
m_fUpVector = z_axe;
matx.ApplyMatrixToVector(zero_p, m_fUpVector);
// Just save the 'y' value for later use when calculating the camera's 'Up' vector
// prior to calling gluLookAt()
m_fRoll = y;
}
public void CalculateUpVector()
{
msgMatrix matx = new msgMatrix();
matx.Rotate(zero_p, x_axe, m_fPitch / 180.0 * Math.PI);
matx.Rotate(zero_p, z_axe, -m_fYaw / 180.0 * Math.PI);
m_fUpVector = z_axe;
matx.ApplyMatrixToVector(zero_p, m_fUpVector);
}
public void PositionCamera()
{
if (m_bResetClippingPlanes)
{
// Reset our cameras clipping plane
ResetView(0, 0);
m_bResetClippingPlanes = false;
}
if (m_fRoll != 0)
{
msgMatrix matx = new msgMatrix();
msgVectorStruct UpVector;
matx.Rotate(zero_p, x_axe, m_fPitch / 180.0 * Math.PI);
matx.Rotate(zero_p, y_axe, m_fRoll / 180.0 * Math.PI);
matx.Rotate(zero_p, z_axe, -m_fYaw / 180.0 * Math.PI);
UpVector = z_axe;
matx.ApplyMatrixToVector(zero_p, UpVector);
// Position the camera using the newly calculated 'Up' vector
OpenGLControl.gluLookAt(m_fEyePos.x, m_fEyePos.y, m_fEyePos.z,
m_fLookAtPos.x, m_fLookAtPos.y, m_fLookAtPos.z,
UpVector.x, UpVector.y, UpVector.z);
}
else
{
// Since our 'Up' vector has already been calculated, all we need to do is
// position the camera..
OpenGLControl.gluLookAt(m_fEyePos.x, m_fEyePos.y, m_fEyePos.z,
m_fLookAtPos.x, m_fLookAtPos.y, m_fLookAtPos.z,
m_fUpVector.x, m_fUpVector.y, m_fUpVector.z);
}
// Save the Model view matrix. This is used later for
// conversion of mouse coordinates to world coordinates.
OpenGLControl.glGetDoublev(OpenGLControl.GL_MODELVIEW_MATRIX, m_dModelViewMatrix);
}
public void GetRotationMatrix(ref msgMatrix XformMatrix)
{
PrepareMatrix(0.0f, 0.0f, 0.0f, // Origin
-m_fPitch, m_fRoll, m_fYaw, // Rotation
0.0f, 0.0f, 0.0f, // Translation
ref XformMatrix);
}
public void FitBounds(double minX, double minY, double minZ,
double maxX, double maxY, double maxZ)
{
BoundingPlane boundsRight = new BoundingPlane();
BoundingPlane boundsLeft = new BoundingPlane();
BoundingPlane boundsTop = new BoundingPlane();
BoundingPlane boundsBottom = new BoundingPlane();
BoundingPlane boundsNear = new BoundingPlane();
BoundingPlane boundsFar = new BoundingPlane();
msgVectorStruct boundsMax = new msgVectorStruct();
msgVectorStruct boundsMin = new msgVectorStruct();
msgVectorStruct vecCenter = new msgVectorStruct();
msgVectorStruct[] vertices = new msgVectorStruct[8];
for (int i = 0; i < vertices.Length; i++)
{
vertices[i] = new msgVectorStruct();
}
msgVectorStruct vecOffset = new msgVectorStruct();
msgMatrix matrix = new msgMatrix();
double focalLength = 0;
double fDepthWidth = 0;
double fDepthHeight = 0;
double rx = 0;
double ry = 0;
double rz = 0;
double fTan = 0;
double fx = 0;
double fz = 0;
fTan = (double)Math.Tan((float)Utils.Radiansf(m_fFovY/2));
// Get the cameras rotatiom about the LookAt position, as we
// will use this to restore the rotation values after we move
// the camera and it's focal length.
GetRotationAboutLookAt(ref rx, ref ry, ref rz);
// Copy the bounds to our local variable
boundsMin.x = minX; boundsMin.y = minY; boundsMin.z = minZ;
boundsMax.x = maxX; boundsMax.y = maxY; boundsMax.z = maxZ;
double spanX, spanY, spanZ;
spanX = Utils.Diff(boundsMax.x, boundsMin.x);
spanY = Utils.Diff(boundsMax.y, boundsMin.y);
spanZ = Utils.Diff(boundsMax.z, boundsMin.z);
vecCenter.x = boundsMax.x - Math.Abs(spanX)/2;
vecCenter.y = boundsMax.y - Math.Abs(spanY)/2;
vecCenter.z = boundsMax.z - Math.Abs(spanZ)/2;
boundsMax.x = spanX/2;
boundsMax.y = spanY/2;
boundsMax.z = spanZ/2;
boundsMin.x = -spanX/2;
boundsMin.y = -spanY/2;
boundsMin.z = -spanZ/2;
// Given the bounding box, fill in the missing vertices to complete our
// cube
vertices[0] = boundsMax; // Left
vertices[1].x = boundsMax.x; vertices[1].y = boundsMax.y; vertices[1].z = boundsMin.x;
vertices[2].x = boundsMax.x; vertices[2].y = boundsMin.y; vertices[2].z = boundsMin.x;
vertices[3].x = boundsMax.x; vertices[3].y = boundsMin.y; vertices[3].z = boundsMax.x;
vertices[4] = boundsMin;
vertices[5].x = boundsMin.x; vertices[5].y = boundsMin.y; vertices[5].z = boundsMax.x;
vertices[6].x = boundsMin.x; vertices[6].y = boundsMax.y; vertices[6].z = boundsMax.x;
vertices[7].x = boundsMin.x; vertices[7].y = boundsMax.y; vertices[7].z = boundsMin.x;
// Get the cameras rotation matrix
GetRotationMatrix(ref matrix);
for(int i=0; i<8; i++)
{
// Transform the vertice by the camera rotation matrix. Since we define the
// default 'Up' camera position as Z-axis Up, the coordinates map as follows:
// X maps to Width,
// Y maps to Depth
// Z mpas to Height
zero_p.x = zero_p.y =zero_p.z =0.0;
matrix.ApplyMatrixToVector(zero_p, vertices[i]);
// Calculate the focal length needed to fit the near bounding plane
fDepthWidth = (Math.Abs(vertices[i].x)/fTan/m_fAspect)-vertices[i].y;
fDepthHeight = (Math.Abs(vertices[i].z) / fTan) - vertices[i].y;
// Calculate the Near clipping bounds. This will be used to fit Isometric views and
// for calculating the Near/Far clipping m_fFrustum.
if(vertices[i].y<0)
{
if (Math.Abs(vertices[i].x) > Math.Abs(boundsNear.vec.x) ||
(Math.Abs(vertices[i].x) == boundsNear.vec.x && Math.Abs(vertices[i].y) > Math.Abs(boundsNear.vec.z)))
{
boundsNear.vec.x = Math.Abs(vertices[i].x);
boundsNear.vec.z = Math.Abs(vertices[i].y);
}
if (Math.Abs(vertices[i].z) > Math.Abs(boundsNear.vec.y) ||
(Math.Abs(vertices[i].z) == boundsNear.vec.y))
{
boundsNear.vec.y = Math.Abs(vertices[i].z);
//boundsNear.vec[W] = fabs(vertices[i].y);
}
// Get the bounding depth closest to the viewer
if(fDepthWidth < boundsNear.fDepth || boundsNear.fDepth == 0)
boundsNear.fDepth = fDepthWidth;
if(fDepthHeight < boundsNear.fDepth || boundsNear.fDepth == 0)
boundsNear.fDepth = fDepthHeight;
}
else
{
if( Math.Abs(vertices[i].x) > Math.Abs(boundsFar.vec.x) ||
(Math.Abs(vertices[i].x) == boundsFar.vec.x && Math.Abs(vertices[i].y) < Math.Abs(boundsFar.vec.z)) )
{
boundsFar.vec.x = vertices[i].x;
boundsFar.vec.z = vertices[i].y;
}
if( Math.Abs(vertices[i].z) > Math.Abs(boundsFar.vec.y) ||
(Math.Abs(vertices[i].z) == Math.Abs(boundsFar.vec.y)) )
{
boundsFar.vec.y = vertices[i].z;
//boundsFar.vec[W] = vertices[i].y;
}
// Get the bounding depth furtherest from the viewer
if(fDepthWidth > boundsFar.fDepth)
boundsFar.fDepth = fDepthWidth;
if(fDepthHeight > boundsFar.fDepth)
boundsFar.fDepth = fDepthHeight;
}
// Calculate the Right, Left, Top and Bottom clipping bounds. This will be used to fit
// Perspective views.
if(vertices[i].x > 0)
{
if(fDepthWidth > boundsRight.fDepth)
{
boundsRight.fDepth = fDepthWidth;
boundsRight.vec.x = vertices[i].x;
//boundsRight.vec[W] = vertices[i].y;
}
}
if(vertices[i].x <= 0)
{
if(fDepthWidth > boundsLeft.fDepth)
{
boundsLeft.fDepth = fDepthWidth;
boundsLeft.vec.x = vertices[i].x;
//boundsLeft.vec[W] = vertices[i].y;
}
}
if(vertices[i].z > 0)
{
if(fDepthHeight > boundsTop.fDepth)
{
boundsTop.fDepth = fDepthHeight;
boundsTop.vec.x = vertices[i].x;
//boundsTop.vec[W] = vertices[i].y;
}
}
if(vertices[i].z <= 0)
{
if(fDepthHeight > boundsBottom.fDepth)
{
boundsBottom.fDepth = fDepthHeight;
boundsBottom.vec.x = vertices[i].x;
//boundsBottom.vec[W] = vertices[i].y;
}
}
}
// Now that we have the view clipping bounds, we can calculate the focal depth
// required to fit the volumn and the offset necessary to center the volumn.
if (m_bPerspective)
{
msgMatrix invMatrix = new msgMatrix();
if (boundsRight.fDepth == boundsLeft.fDepth &&
boundsTop.fDepth == boundsBottom.fDepth)
{
// Front, Side or Top view
// Since the bounds are symetric, just use the Right and Top focal depth.
fx = boundsRight.fDepth;
fz = boundsTop.fDepth;
// No offset necessary
vecOffset.x = vecOffset.y = vecOffset.z = 0.0;
}
else
{
// Calculate the average focal length needed to fit the bounding box
fx = (boundsRight.fDepth + boundsLeft.fDepth) / 2;
fz = (boundsTop.fDepth + boundsBottom.fDepth) / 2;
// Calculate the offset necessary to center the bounding box. Note that we
// use a scaling factor for centering the non-limiting bounds to achieve a
// more visually appealing center.
if (fx > fz)
{
double fScale = Math.Sqrt(boundsTop.fDepth / boundsBottom.fDepth);
double fTop = fTan * fx - fTan * boundsTop.fDepth;
double fBottom = fTan * fx - fTan * boundsBottom.fDepth;
vecOffset.x = (fTan * m_fAspect * boundsRight.fDepth - fTan * m_fAspect * fx);
vecOffset.z = (fBottom - fTop * fScale) / 2;
}
else
{
double fScale = Math.Sqrt(boundsLeft.fDepth / boundsRight.fDepth);
double fRight = fTan * m_fAspect * fz - fTan * m_fAspect * boundsRight.fDepth;
double fLeft = fTan * m_fAspect * fz - fTan * m_fAspect * boundsLeft.fDepth;
vecOffset.z = (fTan * boundsTop.fDepth - fTan * fz);
vecOffset.x = (fLeft - fRight * fScale) / 2;
}
}
// Now that we have the offsets necessary to center the bounds, we must rotate
// the vertices (camera coordinates) by the cameras inverse rotation matrix to
// convert the offsets to world coordinates.
GetInvRotationMatrix(ref invMatrix);
zero_p.x = zero_p.y = zero_p.z = 0.0;
invMatrix.ApplyMatrixToVector(zero_p, vecOffset);
}
else
{
// Isometric View
// Calculate the focal length needed to fit the near bounding plane
if (m_iScreenWidth <= m_iScreenHeight)
{
fx = boundsNear.vec.x / Math.Tan((float)Utils.Radiansf(m_fFovY / 2));
fz = boundsNear.vec.y / Math.Tan((float)Utils.Radiansf(m_fFovY / 2)) / ((double)m_iScreenHeight / (double)m_iScreenWidth);
}
else
{
fx = boundsNear.vec.x / Math.Tan((float)Utils.Radiansf(m_fFovY / 2)) / m_fAspect;
fz = boundsNear.vec.y / Math.Tan((float)Utils.Radiansf(m_fFovY / 2));
}
}
// Set the focal length equal to the largest length required to fit either the
// Width (Horizontal) or Height (Vertical)
focalLength = (fx > fz ? fx : fz);
// Set the camera's new LookAt position to focus on the center
// of the bounding box.
SetLookAtPos(vecCenter.x + vecOffset.x, vecCenter.y + vecOffset.y, vecCenter.z + vecOffset.z);
// Set the camera focal Length
if (focalLength > m_fNear)
SetFocalLength(focalLength, true);
// Adjust the Near clipping plane if necessary
// if((boundsNear.fDepth/2) > 0.5f)
// m_fNear = boundsNear.fDepth/2;
// Adjust the Far clipping plane if necessary
if (focalLength + boundsFar.fDepth > m_fFar)
m_fFar = focalLength + boundsFar.fDepth;
// Recalculate the camera view m_fFrustum;
ResetView(0, 0);
// Restore the cameras rotation about the LookAt position
SetRotationAboutLookAt(rx, ry, rz);
}
private void PrepareMatrix(double Ox, double Oy, double Oz,
double Rx, double Ry, double Rz,
double Tx, double Ty, double Tz,
ref msgMatrix XForm)
{
XForm.Identity();
msgVectorStruct TransV = new msgVectorStruct();
TransV.x = Tx;
TransV.y = Ty;
TransV.z = Tz;
XForm.Translate(TransV);
XForm.Rotate(zero_p, x_axe, Rx);
XForm.Rotate(zero_p, y_axe, Ry);
XForm.Rotate(zero_p, z_axe, Rz);
msgVectorStruct oV = new msgVectorStruct();
oV.x = Ox;
oV.y = Oy;
oV.z = Oz;
XForm.Translate(oV);
}
public void FitBounds(double minX, double minY, double minZ,
double maxX, double maxY, double maxZ)
{
BoundingPlane boundsRight = new BoundingPlane();
BoundingPlane boundsLeft = new BoundingPlane();
BoundingPlane boundsTop = new BoundingPlane();
BoundingPlane boundsBottom = new BoundingPlane();
BoundingPlane boundsNear = new BoundingPlane();
BoundingPlane boundsFar = new BoundingPlane();
msgVectorStruct boundsMax = new msgVectorStruct();
msgVectorStruct boundsMin = new msgVectorStruct();
msgVectorStruct vecCenter = new msgVectorStruct();
msgVectorStruct[] vertices = new msgVectorStruct[8];
for (int i = 0; i < vertices.Length; i++)
{
vertices[i] = new msgVectorStruct();
}
msgVectorStruct vecOffset = new msgVectorStruct();
msgMatrix matrix = new msgMatrix();
double focalLength = 0;
double fDepthWidth = 0;
double fDepthHeight = 0;
double rx = 0;
double ry = 0;
double rz = 0;
double fTan = 0;
double fx = 0;
double fz = 0;
fTan = (double)Math.Tan((float)Utils.Radiansf(m_fFovY / 2));
// Get the cameras rotatiom about the LookAt position, as we
// will use this to restore the rotation values after we move
// the camera and it's focal length.
GetRotationAboutLookAt(ref rx, ref ry, ref rz);
// Copy the bounds to our local variable
boundsMin.x = minX; boundsMin.y = minY; boundsMin.z = minZ;
boundsMax.x = maxX; boundsMax.y = maxY; boundsMax.z = maxZ;
double spanX, spanY, spanZ;
spanX = Utils.Diff(boundsMax.x, boundsMin.x);
spanY = Utils.Diff(boundsMax.y, boundsMin.y);
spanZ = Utils.Diff(boundsMax.z, boundsMin.z);
vecCenter.x = boundsMax.x - Math.Abs(spanX) / 2;
vecCenter.y = boundsMax.y - Math.Abs(spanY) / 2;
vecCenter.z = boundsMax.z - Math.Abs(spanZ) / 2;
boundsMax.x = spanX / 2;
boundsMax.y = spanY / 2;
boundsMax.z = spanZ / 2;
boundsMin.x = -spanX / 2;
boundsMin.y = -spanY / 2;
boundsMin.z = -spanZ / 2;
// Given the bounding box, fill in the missing vertices to complete our
// cube
vertices[0] = boundsMax; // Left
vertices[1].x = boundsMax.x; vertices[1].y = boundsMax.y; vertices[1].z = boundsMin.x;
vertices[2].x = boundsMax.x; vertices[2].y = boundsMin.y; vertices[2].z = boundsMin.x;
vertices[3].x = boundsMax.x; vertices[3].y = boundsMin.y; vertices[3].z = boundsMax.x;
vertices[4] = boundsMin;
vertices[5].x = boundsMin.x; vertices[5].y = boundsMin.y; vertices[5].z = boundsMax.x;
vertices[6].x = boundsMin.x; vertices[6].y = boundsMax.y; vertices[6].z = boundsMax.x;
vertices[7].x = boundsMin.x; vertices[7].y = boundsMax.y; vertices[7].z = boundsMin.x;
// Get the cameras rotation matrix
GetRotationMatrix(ref matrix);
for (int i = 0; i < 8; i++)
{
// Transform the vertice by the camera rotation matrix. Since we define the
// default 'Up' camera position as Z-axis Up, the coordinates map as follows:
// X maps to Width,
// Y maps to Depth
// Z mpas to Height
zero_p.x = zero_p.y = zero_p.z = 0.0;
matrix.ApplyMatrixToVector(zero_p, vertices[i]);
// Calculate the focal length needed to fit the near bounding plane
fDepthWidth = (Math.Abs(vertices[i].x) / fTan / m_fAspect) - vertices[i].y;
fDepthHeight = (Math.Abs(vertices[i].z) / fTan) - vertices[i].y;
// Calculate the Near clipping bounds. This will be used to fit Isometric views and
// for calculating the Near/Far clipping m_fFrustum.
if (vertices[i].y < 0)
{
if (Math.Abs(vertices[i].x) > Math.Abs(boundsNear.vec.x) ||
(Math.Abs(vertices[i].x) == boundsNear.vec.x && Math.Abs(vertices[i].y) > Math.Abs(boundsNear.vec.z)))
{
boundsNear.vec.x = Math.Abs(vertices[i].x);
boundsNear.vec.z = Math.Abs(vertices[i].y);
}
if (Math.Abs(vertices[i].z) > Math.Abs(boundsNear.vec.y) ||
(Math.Abs(vertices[i].z) == boundsNear.vec.y))
{
boundsNear.vec.y = Math.Abs(vertices[i].z);
//boundsNear.vec[W] = fabs(vertices[i].y);
}
// Get the bounding depth closest to the viewer
if (fDepthWidth < boundsNear.fDepth || boundsNear.fDepth == 0)
{
boundsNear.fDepth = fDepthWidth;
}
if (fDepthHeight < boundsNear.fDepth || boundsNear.fDepth == 0)
{
boundsNear.fDepth = fDepthHeight;
}
}
else
{
if (Math.Abs(vertices[i].x) > Math.Abs(boundsFar.vec.x) ||
(Math.Abs(vertices[i].x) == boundsFar.vec.x && Math.Abs(vertices[i].y) < Math.Abs(boundsFar.vec.z)))
{
boundsFar.vec.x = vertices[i].x;
boundsFar.vec.z = vertices[i].y;
}
if (Math.Abs(vertices[i].z) > Math.Abs(boundsFar.vec.y) ||
(Math.Abs(vertices[i].z) == Math.Abs(boundsFar.vec.y)))
{
boundsFar.vec.y = vertices[i].z;
//boundsFar.vec[W] = vertices[i].y;
}
// Get the bounding depth furtherest from the viewer
if (fDepthWidth > boundsFar.fDepth)
{
boundsFar.fDepth = fDepthWidth;
}
if (fDepthHeight > boundsFar.fDepth)
{
boundsFar.fDepth = fDepthHeight;
}
}
// Calculate the Right, Left, Top and Bottom clipping bounds. This will be used to fit
// Perspective views.
if (vertices[i].x > 0)
{
if (fDepthWidth > boundsRight.fDepth)
{
boundsRight.fDepth = fDepthWidth;
boundsRight.vec.x = vertices[i].x;
//boundsRight.vec[W] = vertices[i].y;
}
}
if (vertices[i].x <= 0)
{
if (fDepthWidth > boundsLeft.fDepth)
{
boundsLeft.fDepth = fDepthWidth;
boundsLeft.vec.x = vertices[i].x;
//boundsLeft.vec[W] = vertices[i].y;
}
}
if (vertices[i].z > 0)
{
if (fDepthHeight > boundsTop.fDepth)
{
boundsTop.fDepth = fDepthHeight;
boundsTop.vec.x = vertices[i].x;
//boundsTop.vec[W] = vertices[i].y;
}
}
if (vertices[i].z <= 0)
{
if (fDepthHeight > boundsBottom.fDepth)
{
boundsBottom.fDepth = fDepthHeight;
boundsBottom.vec.x = vertices[i].x;
//boundsBottom.vec[W] = vertices[i].y;
}
}
}
// Now that we have the view clipping bounds, we can calculate the focal depth
// required to fit the volumn and the offset necessary to center the volumn.
if (m_bPerspective)
{
msgMatrix invMatrix = new msgMatrix();
if (boundsRight.fDepth == boundsLeft.fDepth &&
boundsTop.fDepth == boundsBottom.fDepth)
{
// Front, Side or Top view
// Since the bounds are symetric, just use the Right and Top focal depth.
fx = boundsRight.fDepth;
fz = boundsTop.fDepth;
// No offset necessary
vecOffset.x = vecOffset.y = vecOffset.z = 0.0;
}
else
{
// Calculate the average focal length needed to fit the bounding box
fx = (boundsRight.fDepth + boundsLeft.fDepth) / 2;
fz = (boundsTop.fDepth + boundsBottom.fDepth) / 2;
// Calculate the offset necessary to center the bounding box. Note that we
// use a scaling factor for centering the non-limiting bounds to achieve a
// more visually appealing center.
if (fx > fz)
{
double fScale = Math.Sqrt(boundsTop.fDepth / boundsBottom.fDepth);
double fTop = fTan * fx - fTan * boundsTop.fDepth;
double fBottom = fTan * fx - fTan * boundsBottom.fDepth;
vecOffset.x = (fTan * m_fAspect * boundsRight.fDepth - fTan * m_fAspect * fx);
vecOffset.z = (fBottom - fTop * fScale) / 2;
}
else
{
double fScale = Math.Sqrt(boundsLeft.fDepth / boundsRight.fDepth);
double fRight = fTan * m_fAspect * fz - fTan * m_fAspect * boundsRight.fDepth;
double fLeft = fTan * m_fAspect * fz - fTan * m_fAspect * boundsLeft.fDepth;
vecOffset.z = (fTan * boundsTop.fDepth - fTan * fz);
vecOffset.x = (fLeft - fRight * fScale) / 2;
}
}
// Now that we have the offsets necessary to center the bounds, we must rotate
// the vertices (camera coordinates) by the cameras inverse rotation matrix to
// convert the offsets to world coordinates.
GetInvRotationMatrix(ref invMatrix);
zero_p.x = zero_p.y = zero_p.z = 0.0;
invMatrix.ApplyMatrixToVector(zero_p, vecOffset);
}
else
{
// Isometric View
// Calculate the focal length needed to fit the near bounding plane
if (m_iScreenWidth <= m_iScreenHeight)
{
fx = boundsNear.vec.x / Math.Tan((float)Utils.Radiansf(m_fFovY / 2));
fz = boundsNear.vec.y / Math.Tan((float)Utils.Radiansf(m_fFovY / 2)) / ((double)m_iScreenHeight / (double)m_iScreenWidth);
}
else
{
fx = boundsNear.vec.x / Math.Tan((float)Utils.Radiansf(m_fFovY / 2)) / m_fAspect;
fz = boundsNear.vec.y / Math.Tan((float)Utils.Radiansf(m_fFovY / 2));
}
}
// Set the focal length equal to the largest length required to fit either the
// Width (Horizontal) or Height (Vertical)
focalLength = (fx > fz ? fx : fz);
// Set the camera's new LookAt position to focus on the center
// of the bounding box.
SetLookAtPos(vecCenter.x + vecOffset.x, vecCenter.y + vecOffset.y, vecCenter.z + vecOffset.z);
// Set the camera focal Length
if (focalLength > m_fNear)
{
SetFocalLength(focalLength, true);
}
// Adjust the Near clipping plane if necessary
// if((boundsNear.fDepth/2) > 0.5f)
// m_fNear = boundsNear.fDepth/2;
// Adjust the Far clipping plane if necessary
if (focalLength + boundsFar.fDepth > m_fFar)
{
m_fFar = focalLength + boundsFar.fDepth;
}
// Recalculate the camera view m_fFrustum;
ResetView(0, 0);
// Restore the cameras rotation about the LookAt position
SetRotationAboutLookAt(rx, ry, rz);
}
