public void GetData(Input inputData, _InputMeta inputMeta, VoltVarController PreviousFrame)
{
#region [ openECA inputData Extraction ]
// Extract inputData from openECA
//m_inputFrame.ControlTransformers[0].TapV = inputData.TapVTx4;
m_inputFrame.ControlTransformers[0].MwV = inputData.MwVTx4;
m_inputFrame.ControlTransformers[0].MvrV = inputData.MvrVTx4;
m_inputFrame.ControlTransformers[0].VoltsV = inputData.VoltsVTx4;
//m_inputFrame.ControlTransformers[1].TapV = inputData.TapVTx5;
m_inputFrame.ControlTransformers[1].MwV = inputData.MwVTx5;
m_inputFrame.ControlTransformers[1].MvrV = inputData.MvrVTx5;
m_inputFrame.ControlTransformers[1].VoltsV = inputData.VoltsVTx5;
m_inputFrame.ControlCapacitorBanks[0].BusBkrV = inputData.BusBkrVCap1;
//m_inputFrame.ControlCapacitorBanks[0].CapBkrV = inputData.CapBkrVCap1;
m_inputFrame.ControlCapacitorBanks[0].LockvV = inputData.LocKvVCap1;
m_inputFrame.ControlCapacitorBanks[1].BusBkrV = inputData.BusBkrVCap2;
//m_inputFrame.ControlCapacitorBanks[1].CapBkrV = inputData.CapBkrVCap2;
m_inputFrame.ControlCapacitorBanks[1].LockvV = inputData.LocKvVCap2;
m_inputFrame.SubstationInformation.G1Mw = inputData.G1Mw;
m_inputFrame.SubstationInformation.G1Mvr = inputData.G1Mvr;
m_inputFrame.SubstationInformation.G2Mw = inputData.G2Mw;
m_inputFrame.SubstationInformation.G2Mvr = inputData.G2Mvr;
#endregion
SubRoutine sub = new SubRoutine();
ReadCurrentControl ReadCurrentCon = new ReadCurrentControl();
VoltVarController Frame = new VoltVarController();
#region [ Measurements Mapping ]
m_inputFrame.OnNewMeasurements();
#endregion
#region [ Read The Previous Run ]
m_inputFrame.ReadPreviousRun(PreviousFrame);
#endregion
#region [ Verify Program Controls ]
ReadCurrentCon.VerifyProgramControl(m_inputFrame.SubstationAlarmDevice.LtcProgram);
#endregion
#region [ Adjust Control Delay Counters ]
//#-----------------------------------------------------------------------#
//# adjust the cap bank control delay counter, which is used to ensure: #
//# a. we don't do two cap bank control within 30 minutes of each other. #
//# b. we don't do a tap control within a minute of a cap bank control. #
//#-----------------------------------------------------------------------#
if (m_inputFrame.SubstationInformation.Ncdel < m_inputFrame.SubstationInformation.Zcdel)
{
m_inputFrame.SubstationInformation.Ncdel = m_inputFrame.SubstationInformation.Ncdel + 1;
}
//#-----------------------------------------------------------------------#
//# Adjust the tap control delay counter, which is used to ensure we #
//# don't do a cap bank control within a minute of a tap control. #
//#-----------------------------------------------------------------------#
if (m_inputFrame.SubstationInformation.Ntdel < m_inputFrame.SubstationInformation.Zdel)
{
m_inputFrame.SubstationInformation.Ntdel = m_inputFrame.SubstationInformation.Ntdel + 1;
}
#endregion
#region [ Read Curren Tx Values and Voltages ]
m_inputFrame = ReadCurrentCon.ReadCurrentTransformerValuesAndVoltages(m_inputFrame);
#endregion
#region [ Check if the Previous Control Reults can Meet Our Expectation ]
m_inputFrame = ReadCurrentCon.CheckPreviousControlResults(m_inputFrame);
#endregion
#region [ Call Sub Taps ]
m_inputFrame = sub.Taps(m_inputFrame);
#endregion
#region [CapBank]
m_inputFrame = sub.CapBank(m_inputFrame);
#endregion
#region [ Save before Exit ]
m_logMessage = ReadCurrentCon.MessageInput;
m_logMessage += sub.MessageInput;
m_inputFrame.LtcStatus.Avv = 0;
m_inputFrame.LtcStatus.Nins = 0;
m_inputFrame.LtcStatus.MinVar = 99999;
m_inputFrame.LtcStatus.MaxVar = -99999;
#endregion
}
public void PublishFrame(VoltVarController Frame, string inputdatafolder, VoltVarController PreviousFrame)
{
SubRoutine sub = new SubRoutine();
ReadCurrentControl ReadCurrentCon = new ReadCurrentControl();
#region [ Read the Input Value Key Pairs]
foreach (KeyValuePair <string, object> kvp in Frame.RawkeyValuePairs)
{
m_inputFrame.RawkeyValuePairs.Add(kvp.Key, kvp.Value);
}
#endregion
#region [ Measurements Mapping ]
m_inputFrame.OnNewMeasurements();
#endregion
#region [ Read The Previous Run ]
m_inputFrame.ReadPreviousRun(PreviousFrame);
#endregion
#region [ Verify Program Controls ]
ReadCurrentCon.VerifyProgramControl(m_inputFrame.SubstationAlarmDevice.LtcProgram);
#endregion
#region [ Adjust Control Delay Counters ]
//#-----------------------------------------------------------------------#
//# adjust the cap bank control delay counter, which is used to ensure: #
//# a. we don't do two cap bank control within 30 minutes of each other. #
//# b. we don't do a tap control within a minute of a cap bank control. #
//#-----------------------------------------------------------------------#
if (m_inputFrame.SubstationInformation.Ncdel < m_inputFrame.SubstationInformation.Zcdel)
{
m_inputFrame.SubstationInformation.Ncdel = m_inputFrame.SubstationInformation.Ncdel + 1;
}
//#-----------------------------------------------------------------------#
//# Adjust the tap control delay counter, which is used to ensure we #
//# don't do a cap bank control within a minute of a tap control. #
//#-----------------------------------------------------------------------#
if (m_inputFrame.SubstationInformation.Ntdel < m_inputFrame.SubstationInformation.Zdel)
{
m_inputFrame.SubstationInformation.Ntdel = m_inputFrame.SubstationInformation.Ntdel + 1;
}
#endregion
#region [ Read Curren Tx Values and Voltages ]
m_inputFrame = ReadCurrentCon.ReadCurrentTransformerValuesAndVoltages(m_inputFrame);
#endregion
#region [ Check if the Previous Control Reults can Meet Our Expectation ]
m_inputFrame = ReadCurrentCon.CheckPreviousControlResults(m_inputFrame);
#endregion
#region [ Call Sub Taps ]
m_inputFrame = sub.Taps(m_inputFrame);
#endregion
#region [CapBank]
m_inputFrame = sub.CapBank(m_inputFrame);
#endregion
#region [ Save before Exit ]
m_logMessage = ReadCurrentCon.MessageInput;
m_logMessage += sub.MessageInput;
m_inputFrame.RawkeyValuePairs.Clear();
m_inputFrame.LtcStatus.Avv = 0;
m_inputFrame.LtcStatus.Nins = 0;
m_inputFrame.LtcStatus.MinVar = 99999;
m_inputFrame.LtcStatus.MaxVar = -9999;
#endregion
}
