static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.SheetMetalDocument sheetMetalDocument = null;
SolidEdgePart.RefPlanes refplanes = null;
SolidEdgePart.RefPlane refplane = null;
SolidEdgePart.Model model = null;
SolidEdgePart.HoleDataCollection holeDataCollection = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgePart.Holes2d holes2d = null;
SolidEdgePart.Hole2d hole2d = null;
SolidEdgePart.Holes holes = null;
SolidEdgePart.Hole hole = null;
long profileStatus = 0;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
SolidEdgePart.UserDefinedPatterns userDefinedPatterns = null;
SolidEdgePart.UserDefinedPattern userDefinedPattern = null;
SolidEdgeFramework.SelectSet selectSet = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the Documents collection.
documents = application.Documents;
// Create a new sheetmetal document.
sheetMetalDocument = documents.AddSheetMetalDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Call helper method to create the actual geometry.
model = SheetMetalHelper.CreateBaseTabByCircle(sheetMetalDocument);
// Get a reference to the RefPlanes collection.
refplanes = sheetMetalDocument.RefPlanes;
// Get a reference to front RefPlane.
refplane = refplanes.GetFrontPlane();
// Get a reference to the ProfileSets collection.
profileSets = sheetMetalDocument.ProfileSets;
// Add new ProfileSet.
profileSet = profileSets.Add();
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add new Profile.
profile = profiles.Add(refplane);
// Get a reference to the Holes2d collection.
holes2d = profile.Holes2d;
// This creates a cross pattern of holes.
double[,] holeMatrix = new double[, ]
{
//{x, y}
{ 0.00, 0.00 },
{ -0.01, 0.00 },
{ -0.02, 0.00 },
{ -0.03, 0.00 },
{ -0.04, 0.00 },
{ 0.01, 0.00 },
{ 0.02, 0.00 },
{ 0.03, 0.00 },
{ 0.04, 0.00 },
{ 0.00, -0.01 },
{ 0.00, -0.02 },
{ 0.00, -0.03 },
{ 0.00, -0.04 },
{ 0.00, 0.01 },
{ 0.00, 0.02 },
{ 0.00, 0.03 },
{ 0.00, 0.04 }
};
// Draw the Base Profile.
for (int i = 0; i <= holeMatrix.GetUpperBound(0); i++)
{
// Add new Hole2d.
hole2d = holes2d.Add(
XCenter: holeMatrix[i, 0],
YCenter: holeMatrix[i, 1]);
}
// Hide the profile.
profile.Visible = false;
// Close profile.
profileStatus = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Get a reference to the ProfileSet.
profileSet = (SolidEdgePart.ProfileSet)profile.Parent;
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add profiles to list for AddByProfiles().
for (int i = 1; i <= profiles.Count; i++)
{
profileList.Add(profiles.Item(i));
}
// Get a reference to the HoleDataCollection collection.
holeDataCollection = sheetMetalDocument.HoleDataCollection;
// Add new HoleData.
SolidEdgePart.HoleData holeData = holeDataCollection.Add(
HoleType: SolidEdgePart.FeaturePropertyConstants.igRegularHole,
HoleDiameter: 0.005,
BottomAngle: 90);
// Get a reference to the Holes collection.
holes = model.Holes;
// Add hole.
hole = holes.AddFinite(
Profile: profile,
ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
FiniteDepth: 0.005,
Data: holeData);
// Get a reference to the UserDefinedPatterns collection.
userDefinedPatterns = model.UserDefinedPatterns;
// Create the user defined pattern.
userDefinedPattern = userDefinedPatterns.AddByProfiles(
NumberOfProfiles: profileList.Count,
ProfilesArray: profileList.ToArray(),
SeedFeature: hole);
// Get a reference to the ActiveSelectSet.
selectSet = application.ActiveSelectSet;
// Empty ActiveSelectSet.
selectSet.RemoveAll();
// Add new UserDefinedPattern to ActiveSelectSet.
selectSet.Add(userDefinedPattern);
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
public static void CreateHolesWithUserDefinedPattern(SolidEdgePart.PartDocument partDocument)
{
SolidEdgePart.RefPlanes refplanes = null;
SolidEdgePart.RefPlane refplane = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgePart.HoleDataCollection holeDataCollection = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgePart.Holes2d holes2d = null;
SolidEdgePart.Hole2d hole2d = null;
SolidEdgePart.Holes holes = null;
SolidEdgePart.Hole hole = null;
long profileStatus = 0;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
SolidEdgePart.UserDefinedPatterns userDefinedPatterns = null;
SolidEdgePart.UserDefinedPattern userDefinedPattern = null;
// Get a reference to the RefPlanes collection.
refplanes = partDocument.RefPlanes;
// Get a reference to front RefPlane.
refplane = refplanes.GetFrontPlane();
List <double[]> linesArray = new List <double[]>();
linesArray.Add(new double[] { 0, 0, 0.08, 0 });
linesArray.Add(new double[] { 0.08, 0, 0.08, 0.06 });
linesArray.Add(new double[] { 0.08, 0.06, 0.064, 0.06 });
linesArray.Add(new double[] { 0.064, 0.06, 0.064, 0.02 });
linesArray.Add(new double[] { 0.064, 0.02, 0.048, 0.02 });
linesArray.Add(new double[] { 0.048, 0.02, 0.048, 0.06 });
linesArray.Add(new double[] { 0.048, 0.06, 0.032, 0.06 });
linesArray.Add(new double[] { 0.032, 0.06, 0.032, 0.02 });
linesArray.Add(new double[] { 0.032, 0.02, 0.016, 0.02 });
linesArray.Add(new double[] { 0.016, 0.02, 0.016, 0.06 });
linesArray.Add(new double[] { 0.016, 0.06, 0, 0.06 });
linesArray.Add(new double[] { 0, 0.06, 0, 0 });
// Call helper method to create the actual geometry.
CreateFiniteExtrudedProtrusion(partDocument, refplane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.005);
// Get a reference to the Models collection.
models = partDocument.Models;
// Get a reference to Model.
model = models.Item(1);
// Get a reference to the ProfileSets collection.
profileSets = partDocument.ProfileSets;
// Add new ProfileSet.
profileSet = profileSets.Add();
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add new Profile.
profile = profiles.Add(refplane);
// Get a reference to the Holes2d collection.
holes2d = profile.Holes2d;
double[,] holeMatrix = new double[, ]
{
//{x, y}
{ 0.01, 0.01 },
{ 0.02, 0.01 },
{ 0.03, 0.01 },
{ 0.04, 0.01 },
{ 0.05, 0.01 },
{ 0.06, 0.01 },
{ 0.07, 0.01 }
};
// Draw the Base Profile.
for (int i = 0; i <= holeMatrix.GetUpperBound(0); i++)
{
// Add new Hole2d.
hole2d = holes2d.Add(
XCenter: holeMatrix[i, 0],
YCenter: holeMatrix[i, 1]);
}
// Hide the profile.
profile.Visible = false;
// Close profile.
profileStatus = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Get a reference to the ProfileSet.
profileSet = (SolidEdgePart.ProfileSet)profile.Parent;
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add profiles to list for AddByProfiles().
for (int i = 1; i <= profiles.Count; i++)
{
profileList.Add(profiles.Item(i));
}
// Get a reference to the HoleDataCollection collection.
holeDataCollection = partDocument.HoleDataCollection;
// Add new HoleData.
SolidEdgePart.HoleData holeData = holeDataCollection.Add(
HoleType: SolidEdgePart.FeaturePropertyConstants.igRegularHole,
HoleDiameter: 0.005,
BottomAngle: 90);
// Get a reference to the Holes collection.
holes = model.Holes;
// Add hole.
hole = holes.AddFinite(
Profile: profile,
ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
FiniteDepth: 0.005,
Data: holeData);
// Get a reference to the UserDefinedPatterns collection.
userDefinedPatterns = model.UserDefinedPatterns;
// Create the user defined pattern.
userDefinedPattern = userDefinedPatterns.AddByProfiles(
NumberOfProfiles: profileList.Count,
ProfilesArray: profileList.ToArray(),
SeedFeature: hole);
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgePart.SheetMetalDocument sheetMetalDocument = null;
SolidEdgePart.FamilyMembers familyMembers = null;
SolidEdgePart.Round round = null;
SolidEdgePart.UserDefinedPattern userDefinedPattern = null;
SolidEdgeFrameworkSupport.Dimension dimension = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Bring Solid Edge to the foreground.
application.Activate();
// Get a reference to the active part document.
sheetMetalDocument = application.GetActiveDocument <SolidEdgePart.SheetMetalDocument>(false);
if (sheetMetalDocument != null)
{
// Get a reference to the FamilyMembers collection.
familyMembers = sheetMetalDocument.FamilyMembers;
// Interate through the family members.
foreach (var familyMember in familyMembers.OfType <SolidEdgePart.FamilyMember>())
{
Console.WriteLine(familyMember.Name);
// Determine FamilyMember MovePrecedence.
switch (familyMember.MovePrecedence)
{
case SolidEdgePart.MovePrecedenceConstants.igModelMovePredecence:
break;
case SolidEdgePart.MovePrecedenceConstants.igSelectSetMovePrecedence:
break;
}
// Warning: Accessing certain LiveRule[...] properties may throw an exception.
//Console.WriteLine("igConcentricLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igConcentricLiveRule]);
//Console.WriteLine("igCoplanarAxesAboutXLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igCoplanarAxesAboutXLiveRule]);
//Console.WriteLine("igCoplanarAxesAboutYLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igCoplanarAxesAboutYLiveRule]);
//Console.WriteLine("igCoplanarAxesAboutZLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igCoplanarAxesAboutZLiveRule]);
//Console.WriteLine("igCoplanarAxesLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igCoplanarAxesLiveRule]);
//Console.WriteLine("igCoplanarLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igCoplanarLiveRule]);
//Console.WriteLine("igMaintainRadiusLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igMaintainRadiusLiveRule]);
//Console.WriteLine("igOrthoLockingLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igOrthoLockingLiveRule]);
//Console.WriteLine("igParallelLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igParallelLiveRule]);
//Console.WriteLine("igPerpendicularLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igPerpendicularLiveRule]);
//Console.WriteLine("igSymmetricLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igSymmetricLiveRule]);
//Console.WriteLine("igSymmetricXYLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igSymmetricXYLiveRule]);
//Console.WriteLine("igSymmetricYZLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igSymmetricYZLiveRule]);
//Console.WriteLine("igSymmetricZXLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igSymmetricZXLiveRule]);
//Console.WriteLine("igTangentEdgeLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igTangentEdgeLiveRule]);
//Console.WriteLine("igTangentTouchingLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igTangentTouchingLiveRule]);
//Console.WriteLine("igThicknessChainLiveRule - {0}", familyMember.LiveRule[SolidEdgePart.LiveRulesConstants.igThicknessChainLiveRule]);
// Interate through the suppressed features of the current family member.
for (int j = 1; j <= familyMember.SuppressedFeatureCount; j++)
{
object suppressedFeature = familyMember.SuppressedFeature[j];
// Use helper class to get the feature type.
var featureType = SolidEdgeCommunity.Runtime.InteropServices.ComObject.GetPropertyValue <SolidEdgePart.FeatureTypeConstants>(suppressedFeature, "Type", (SolidEdgePart.FeatureTypeConstants) 0);
switch (featureType)
{
case SolidEdgePart.FeatureTypeConstants.igRoundFeatureObject:
round = (SolidEdgePart.Round)suppressedFeature;
break;
case SolidEdgePart.FeatureTypeConstants.igUserDefinedPatternFeatureObject:
userDefinedPattern = (SolidEdgePart.UserDefinedPattern)suppressedFeature;
break;
}
}
// Interate through the variables of the current family member.
for (int j = 1; j <= familyMember.VariableCount; j++)
{
object variable = familyMember.Variable[j];
// Use helper class to get the object type.
var objectType = SolidEdgeCommunity.Runtime.InteropServices.ComObject.GetPropertyValue <SolidEdgeFramework.ObjectType>(variable, "Type", (SolidEdgeFramework.ObjectType) 0);
switch (objectType)
{
case SolidEdgeFramework.ObjectType.igDimension:
dimension = (SolidEdgeFrameworkSupport.Dimension)variable;
break;
}
}
}
}
else
{
throw new System.Exception("No active document.");
}
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.SheetMetalDocument sheetMetalDocument = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgeFramework.SelectSet selectSet = null;
Array features = Array.CreateInstance(typeof(object), 0);
SolidEdgePart.ExtrudedProtrusion extrudedProtrustion = null;
SolidEdgePart.UserDefinedPattern userDefinedPattern = null;
SolidEdgePart.MirrorCopy mirrorCopy = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the documents collection.
documents = application.Documents;
// Create a new sheet metal document.
sheetMetalDocument = documents.AddSheetMetalDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Get a reference to the RefPlanes collection.
refPlanes = sheetMetalDocument.RefPlanes;
// Get a reference to the top RefPlane using extension method.
refPlane = refPlanes.GetTopPlane();
// Get path to Solid Edge training directory. Typically, 'C:\Program Files\Solid Edge XXX\Training'.
var trainingDirectory = new System.IO.DirectoryInfo(SolidEdgeCommunity.SolidEdgeUtils.GetTrainingFolderPath());
// Build path to source part document.
//string LibName = System.IO.Path.Combine(trainingDirectory.FullName, "Foot1.psm");
string LibName = System.IO.Path.Combine(trainingDirectory.FullName, "base.par");
// This method will take all features from block.par and place them into the new part document.
sheetMetalDocument.PlaceFeatureLibrary(LibName, refPlane, 0.0, 0.0, 0.0, out features);
// Optionally, iterate through all of the added features.
foreach (var feature in features.OfType <object>())
{
// Use helper class to get the feature type.
var featureType = SolidEdgeCommunity.Runtime.InteropServices.ComObject.GetPropertyValue <SolidEdgePart.FeatureTypeConstants>(feature, "Type", (SolidEdgePart.FeatureTypeConstants) 0);
// Depending on the feature type, we can cast the weakly typed feature to a strongly typed feature.
switch (featureType)
{
case SolidEdgePart.FeatureTypeConstants.igExtrudedProtrusionFeatureObject:
extrudedProtrustion = (SolidEdgePart.ExtrudedProtrusion)feature;
break;
case SolidEdgePart.FeatureTypeConstants.igUserDefinedPatternFeatureObject:
userDefinedPattern = (SolidEdgePart.UserDefinedPattern)feature;
break;
case SolidEdgePart.FeatureTypeConstants.igMirrorCopyFeatureObject:
mirrorCopy = (SolidEdgePart.MirrorCopy)feature;
break;
}
}
// Get a reference to the ActiveSelectSet.
selectSet = application.ActiveSelectSet;
// Empty ActiveSelectSet.
selectSet.RemoveAll();
// Add all features to ActiveSelectSet.
foreach (object feature in features)
{
selectSet.Add(feature);
}
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void CreateHolesWithUserDefinedPattern(SolidEdgePart.SheetMetalDocument sheetMetalDocument)
{
SolidEdgePart.RefPlanes refplanes = null;
SolidEdgePart.RefPlane refplane = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgePart.HoleDataCollection holeDataCollection = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgePart.Holes2d holes2d = null;
SolidEdgePart.Hole2d hole2d = null;
SolidEdgePart.Holes holes = null;
SolidEdgePart.Hole hole = null;
long profileStatus = 0;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
SolidEdgePart.UserDefinedPatterns userDefinedPatterns = null;
SolidEdgePart.UserDefinedPattern userDefinedPattern = null;
// Get a reference to the RefPlanes collection.
refplanes = sheetMetalDocument.RefPlanes;
// Get a reference to Right (yz) plane.
refplane = refplanes.Item(3);
// Get a reference to the Models collection.
models = sheetMetalDocument.Models;
// Get a reference to Model.
model = models.Item(1);
// Get a reference to the ProfileSets collection.
profileSets = sheetMetalDocument.ProfileSets;
// Add new ProfileSet.
profileSet = profileSets.Add();
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add new Profile.
profile = profiles.Add(refplane);
// Get a reference to the Holes2d collection.
holes2d = profile.Holes2d;
// This creates a cross pattern of holes.
double[,] holeMatrix = new double[, ]
{
//{x, y}
{ 0.00, 0.00 },
{ -0.01, 0.00 },
{ -0.02, 0.00 },
{ -0.03, 0.00 },
{ -0.04, 0.00 },
{ 0.01, 0.00 },
{ 0.02, 0.00 },
{ 0.03, 0.00 },
{ 0.04, 0.00 },
{ 0.00, -0.01 },
{ 0.00, -0.02 },
{ 0.00, -0.03 },
{ 0.00, -0.04 },
{ 0.00, 0.01 },
{ 0.00, 0.02 },
{ 0.00, 0.03 },
{ 0.00, 0.04 }
};
// Draw the Base Profile.
for (int i = 0; i <= holeMatrix.GetUpperBound(0); i++)
{
// Add new Hole2d.
hole2d = holes2d.Add(
XCenter: holeMatrix[i, 0],
YCenter: holeMatrix[i, 1]);
}
// Hide the profile.
profile.Visible = false;
// Close profile.
profileStatus = profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Get a reference to the ProfileSet.
profileSet = (SolidEdgePart.ProfileSet)profile.Parent;
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Add profiles to list for AddByProfiles().
for (int i = 1; i <= profiles.Count; i++)
{
profileList.Add(profiles.Item(i));
}
// Get a reference to the HoleDataCollection collection.
holeDataCollection = sheetMetalDocument.HoleDataCollection;
// Add new HoleData.
SolidEdgePart.HoleData holeData = holeDataCollection.Add(
HoleType: SolidEdgePart.FeaturePropertyConstants.igRegularHole,
HoleDiameter: 0.005,
BottomAngle: 90);
// Get a reference to the Holes collection.
holes = model.Holes;
// Add hole.
hole = holes.AddFinite(
Profile: profile,
ProfilePlaneSide: SolidEdgePart.FeaturePropertyConstants.igRight,
FiniteDepth: 0.005,
Data: holeData);
// Get a reference to the UserDefinedPatterns collection.
userDefinedPatterns = model.UserDefinedPatterns;
// Create the user defined pattern.
userDefinedPattern = userDefinedPatterns.AddByProfiles(
NumberOfProfiles: profileList.Count,
ProfilesArray: profileList.ToArray(),
SeedFeature: hole);
}
