static void CreateExtrudedProtrusion(SolidEdgePart.SheetMetalDocument sheetMetalDocument)
{
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.Sketchs sketchs = null;
SolidEdgePart.Sketch sketch = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
SolidEdgeFrameworkSupport.Circle2d circle2d = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
// Get refplane.
refPlanes = sheetMetalDocument.RefPlanes;
refPlane = refPlanes.Item(2);
// Create sketch.
sketchs = sheetMetalDocument.Sketches;
sketch = sketchs.Add();
// Create profile.
profiles = sketch.Profiles;
profile = profiles.Add(refPlane);
// Create 2D circle.
circles2d = profile.Circles2d;
circle2d = circles2d.AddByCenterRadius(0, 0, 0.05);
profile.Visible = false;
// Create extruded protrusion.
models = sheetMetalDocument.Models;
model = models.AddBaseTab(profile, SolidEdgePart.FeaturePropertyConstants.igRight);
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgeDraft.DraftDocument draftDocument = null;
SolidEdgeDraft.Sheet sheet = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
SolidEdgeFrameworkSupport.Circle2d circle2d = null;
SolidEdgeFrameworkSupport.Dimensions dimensions = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the documents collection.
documents = application.Documents;
// Create a new draft document.
draftDocument = documents.AddDraftDocument();
// Get a reference to the active sheet.
sheet = draftDocument.ActiveSheet;
// Get a reference to the Circles2d collection.
circles2d = sheet.Circles2d;
// Get a reference to the Dimensions collection.
dimensions = (SolidEdgeFrameworkSupport.Dimensions)sheet.Dimensions;
double x = 0.1;
double y = 0.1;
double radius = 0.01;
for (int i = 0; i < 5; i++)
{
// Add the circle.
circle2d = circles2d.AddByCenterRadius(x, y, radius);
// Dimension the circle.
dimensions.AddRadialDiameter(circle2d);
x += 0.05;
y += 0.05;
radius += 0.01;
}
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgeDraft.DraftDocument draftDocument = null;
SolidEdgeDraft.Sheet sheet = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
SolidEdgeFrameworkSupport.Circle2d circle2d = null;
SolidEdgeFrameworkSupport.GeometryStyle2d geometryStyle2d = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the Documents collection.
documents = application.Documents;
// Create a new draft document.
draftDocument = documents.AddDraftDocument();
// Get a reference to the active sheet.
sheet = draftDocument.ActiveSheet;
// Get a reference to the Circles2d collection.
circles2d = sheet.Circles2d;
// Add the circle.
circle2d = circles2d.AddByCenterRadius(0.2, 0.2, 0.1);
// Get a reference to the GeometryStyle2d to modify the style.
geometryStyle2d = circle2d.Style;
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
public static SolidEdgePart.Model CreateBaseTabByCircle(SolidEdgePart.SheetMetalDocument sheetMetalDocument)
{
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.Sketchs sketchs = null;
SolidEdgePart.Sketch sketch = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
SolidEdgeFrameworkSupport.Circle2d circle2d = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
double x = 0;
double y = 0;
double radius = 0.05;
// Get refplane.
refPlanes = sheetMetalDocument.RefPlanes;
// Get a reference to front RefPlane.
refPlane = refPlanes.GetFrontPlane();
// Create sketch.
sketchs = sheetMetalDocument.Sketches;
sketch = sketchs.Add();
// Create profile.
profiles = sketch.Profiles;
profile = profiles.Add(refPlane);
// Create 2D circle.
circles2d = profile.Circles2d;
circle2d = circles2d.AddByCenterRadius(x, y, radius);
// Hide profile.
profile.Visible = false;
// Create extruded protrusion.
models = sheetMetalDocument.Models;
model = models.AddBaseTab(profile, SolidEdgePart.FeaturePropertyConstants.igRight);
return(model);
}
public static SolidEdgePart.Model CreateSweptProtrusion(SolidEdgePart.PartDocument partDocument)
{
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgePart.Sketchs sketches = null;
SolidEdgePart.Sketch sketch = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile sketchProfile = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
List <SolidEdgePart.Profile> listPaths = new List <SolidEdgePart.Profile>();
List <SolidEdgePart.FeaturePropertyConstants> listPathTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
List <SolidEdgePart.Profile> listSections = new List <SolidEdgePart.Profile>();
List <SolidEdgePart.FeaturePropertyConstants> listSectionTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
List <int> listOrigins = new List <int>();
// Get a reference to the models collection.
models = (SolidEdgePart.Models)partDocument.Models;
// Get a reference to the Sketches collections.
sketches = (SolidEdgePart.Sketchs)partDocument.Sketches;
// Get a reference to the profile sets collection.
profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets;
// Get a reference to the ref planes collection.
refPlanes = (SolidEdgePart.RefPlanes)partDocument.RefPlanes;
// Get a reference to front RefPlane.
refPlane = refPlanes.GetFrontPlane();
// Add a new sketch.
sketch = (SolidEdgePart.Sketch)sketches.Add();
// Add profile for sketch on specified refplane.
sketchProfile = sketch.Profiles.Add(refPlane);
// Get a reference to the Circles2d collection.
circles2d = sketchProfile.Circles2d;
// Draw the Base Profile.
circles2d.AddByCenterRadius(0, 0, 0.02);
// Close the profile.
sketchProfile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Arrays for AddSweptProtrusion().
listPaths.Add(sketchProfile);
listPathTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
// NOTE: profile is the Curve.
refPlane = refPlanes.AddNormalToCurve(
sketchProfile,
SolidEdgePart.ReferenceElementConstants.igCurveEnd,
refPlanes.GetFrontPlane(),
SolidEdgePart.ReferenceElementConstants.igPivotEnd,
true,
System.Reflection.Missing.Value);
// Add a new profile set.
profileSet = (SolidEdgePart.ProfileSet)profileSets.Add();
// Get a reference to the profiles collection.
profiles = (SolidEdgePart.Profiles)profileSet.Profiles;
// add a new profile.
profile = (SolidEdgePart.Profile)profiles.Add(refPlane);
// Get a reference to the Circles2d collection.
circles2d = profile.Circles2d;
// Draw the Base Profile.
circles2d.AddByCenterRadius(0, 0, 0.01);
// Close the profile.
profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Arrays for AddSweptProtrusion().
listSections.Add(profile);
listSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
listOrigins.Add(0); //Use 0 for closed profiles.
// Create the extended protrusion.
model = models.AddSweptProtrusion(
listPaths.Count,
listPaths.ToArray(),
listPathTypes.ToArray(),
listSections.Count,
listSections.ToArray(),
listSectionTypes.ToArray(),
listOrigins.ToArray(),
0,
SolidEdgePart.FeaturePropertyConstants.igLeft,
SolidEdgePart.FeaturePropertyConstants.igNone,
0.0,
null,
SolidEdgePart.FeaturePropertyConstants.igNone,
0.0,
null);
// Hide profiles.
sketchProfile.Visible = false;
profile.Visible = false;
return(model);
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.Sketchs sketches = null;
SolidEdgePart.Sketch sketch = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
SolidEdgeFrameworkSupport.Circle2d circle2d = null;
SolidEdgeFramework.SelectSet selectSet = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the documents collection.
documents = application.Documents;
// Create a new part document.
partDocument = documents.AddPartDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Get a reference to the RefPlanes collection.
refPlanes = partDocument.RefPlanes;
// Get a reference to front RefPlane.
refPlane = refPlanes.GetFrontPlane();
// Get a reference to the Sketches collection.
sketches = partDocument.Sketches;
// Create a new sketch.
sketch = sketches.Add();
// Get a reference to the Profiles collection.
profiles = sketch.Profiles;
// Create a new profile.
profile = profiles.Add(refPlane);
circles2d = profile.Circles2d;
circle2d = circles2d.AddByCenterRadius(0.04, 0.05, 0.02);
profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Get a reference to the ActiveSelectSet.
selectSet = application.ActiveSelectSet;
// Empty ActiveSelectSet.
selectSet.RemoveAll();
// Add new FaceRotate to ActiveSelectSet.
selectSet.Add(circle2d);
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.SheetMetalDocument sheetMetalDocument = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.Sketchs sketchs = null;
SolidEdgePart.Sketch sketch = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
SolidEdgeFrameworkSupport.Circle2d circle2d = null;
SolidEdgePart.Model model = null;
SolidEdgePart.ExtrudedCutouts extrudedCutouts = null;
SolidEdgePart.ExtrudedCutout extrudedCutout = null;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
double finiteDepth1 = 0.5;
SolidEdgeFramework.SelectSet selectSet = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the Documents collection.
documents = application.Documents;
// Create a new sheetmetal document.
sheetMetalDocument = documents.AddSheetMetalDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Call helper method to create the actual geometry.
model = SheetMetalHelper.CreateBaseTabByCircle(sheetMetalDocument);
// Get a reference to the RefPlanes collection.
refPlanes = sheetMetalDocument.RefPlanes;
// Get a reference to right RefPlane.
refPlane = refPlanes.GetRightPlane();
// Get a reference to the Sketches collection.
sketchs = sheetMetalDocument.Sketches;
// Add a new Sketch.
sketch = sketchs.Add();
// Get a reference to the Profiles collection.
profiles = sketch.Profiles;
// Add a new Profile.
profile = profiles.Add(refPlane);
profileList.Add(profile);
// Create 2D circle.
circles2d = profile.Circles2d;
circle2d = circles2d.AddByCenterRadius(0, 0, 0.025);
profile.Visible = false;
// Get a reference to the ExtrudedCutouts collection.
extrudedCutouts = model.ExtrudedCutouts;
// Add a new ExtrudedCutout.
extrudedCutout = extrudedCutouts.Add(
profileList.Count,
profileList.ToArray(),
SolidEdgePart.FeaturePropertyConstants.igLeft,
SolidEdgePart.FeaturePropertyConstants.igFinite,
SolidEdgePart.FeaturePropertyConstants.igSymmetric,
finiteDepth1,
null,
SolidEdgePart.KeyPointExtentConstants.igTangentNormal,
null,
SolidEdgePart.OffsetSideConstants.seOffsetNone,
0,
SolidEdgePart.TreatmentTypeConstants.seTreatmentNone,
SolidEdgePart.DraftSideConstants.seDraftNone,
0,
SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownNone,
SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideNone,
SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureNone,
0,
0,
SolidEdgePart.FeaturePropertyConstants.igNone,
SolidEdgePart.FeaturePropertyConstants.igNone,
0,
null,
SolidEdgePart.KeyPointExtentConstants.igTangentNormal,
null,
SolidEdgePart.OffsetSideConstants.seOffsetNone,
0,
SolidEdgePart.TreatmentTypeConstants.seTreatmentNone,
SolidEdgePart.DraftSideConstants.seDraftNone,
0,
SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownNone,
SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideNone,
SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureNone,
0,
0);
// Get a reference to the ActiveSelectSet.
selectSet = application.ActiveSelectSet;
// Empty ActiveSelectSet.
selectSet.RemoveAll();
// Add new ExtrudedCutout to ActiveSelectSet.
selectSet.Add(extrudedCutout);
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.Sketchs sketches = null;
SolidEdgePart.Sketch sketch = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
SolidEdgeFrameworkSupport.Circle2d circle2d = null;
SolidEdgePart.Constructions constructions = null;
SolidEdgePart.ExtrudedSurfaces extrudedSurfaces = null;
SolidEdgePart.ExtrudedSurface extrudedSurface = null;
SolidEdgeFramework.SelectSet selectSet = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the Documents collection.
documents = application.Documents;
// Create a new part document.
partDocument = documents.AddPartDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Get a reference to the RefPlanes collection.
refPlanes = partDocument.RefPlanes;
// Get a reference to front RefPlane.
refPlane = refPlanes.GetFrontPlane();
// Get a reference to the Sketches collection.
sketches = partDocument.Sketches;
// Create a new sketch.
sketch = sketches.Add();
// Get a reference to the Profiles collection.
profiles = sketch.Profiles;
// Create a new profile.
profile = profiles.Add(refPlane);
circles2d = profile.Circles2d;
circle2d = circles2d.AddByCenterRadius(0.04, 0.05, 0.02);
profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Get a reference to the Constructions collection.
constructions = partDocument.Constructions;
// Get a reference to the ExtrudedSurfaces collection.
extrudedSurfaces = constructions.ExtrudedSurfaces;
// These parameter variables are declared because we have to pass them as pointers.
SolidEdgePart.KeyPointExtentConstants KeyPointFlags1 = SolidEdgePart.KeyPointExtentConstants.igTangentNormal;
SolidEdgePart.KeyPointExtentConstants KeyPointFlags2 = SolidEdgePart.KeyPointExtentConstants.igTangentNormal;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
for (int i = 1; i <= profiles.Count; i++)
{
profileList.Add(profiles.Item(i));
}
Array profileArray = profileList.ToArray();
// Add a new ExtrudedSurface.
extrudedSurface = extrudedSurfaces.Add(
NumberOfProfiles: profileArray.Length,
ProfileArray: ref profileArray,
ExtentType1: SolidEdgePart.FeaturePropertyConstants.igFinite,
ExtentSide1: SolidEdgePart.FeaturePropertyConstants.igRight,
FiniteDepth1: 0.0127,
KeyPointOrTangentFace1: null,
KeyPointFlags1: ref KeyPointFlags1,
FromFaceOrRefPlane: null,
FromFaceOffsetSide: SolidEdgePart.OffsetSideConstants.seOffsetNone,
FromFaceOffsetDistance: 0,
TreatmentType1: SolidEdgePart.TreatmentTypeConstants.seTreatmentCrown,
TreatmentDraftSide1: SolidEdgePart.DraftSideConstants.seDraftInside,
TreatmentDraftAngle1: 0.1,
TreatmentCrownType1: SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownByOffset,
TreatmentCrownSide1: SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideInside,
TreatmentCrownCurvatureSide1: SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureInside,
TreatmentCrownRadiusOrOffset1: 0.003,
TreatmentCrownTakeOffAngle1: 0,
ExtentType2: SolidEdgePart.FeaturePropertyConstants.igFinite,
ExtentSide2: SolidEdgePart.FeaturePropertyConstants.igLeft,
FiniteDepth2: 0.0127,
KeyPointOrTangentFace2: null,
KeyPointFlags2: ref KeyPointFlags2,
ToFaceOrRefPlane: null,
ToFaceOffsetSide: SolidEdgePart.OffsetSideConstants.seOffsetNone,
ToFaceOffsetDistance: 0,
TreatmentType2: SolidEdgePart.TreatmentTypeConstants.seTreatmentCrown,
TreatmentDraftSide2: SolidEdgePart.DraftSideConstants.seDraftNone,
TreatmentDraftAngle2: 0,
TreatmentCrownType2: SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownByOffset,
TreatmentCrownSide2: SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideInside,
TreatmentCrownCurvatureSide2: SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureInside,
TreatmentCrownRadiusOrOffset2: 0.003,
TreatmentCrownTakeOffAngle2: 0,
WantEndCaps: true
);
SolidEdgePart.FeaturePropertyConstants ExtentType;
SolidEdgePart.FeaturePropertyConstants ExtentSide;
double FiniteDepth = 0.0;
SolidEdgePart.KeyPointExtentConstants KeyPointFlags = SolidEdgePart.KeyPointExtentConstants.igTangentNormal;
// Get extent information for the first direction.
extrudedSurface.GetDirection1Extent(out ExtentType, out ExtentSide, out FiniteDepth);
// Modify parameters.
FiniteDepth = 2.0;
ExtentType = SolidEdgePart.FeaturePropertyConstants.igFinite;
ExtentSide = SolidEdgePart.FeaturePropertyConstants.igRight;
// Apply extent information for the first direction.
extrudedSurface.ApplyDirection1Extent(
ExtentType,
ExtentSide,
FiniteDepth,
null,
ref KeyPointFlags);
// Get a reference to the ActiveSelectSet.
selectSet = application.ActiveSelectSet;
// Empty ActiveSelectSet.
selectSet.RemoveAll();
// Add new FaceRotate to ActiveSelectSet.
selectSet.Add(extrudedSurface);
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
List <SolidEdgePart.Profile> crossSectionProfiles = new List <SolidEdgePart.Profile>();
SolidEdgeFrameworkSupport.Lines2d lines2d = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
SolidEdgeFrameworkSupport.Relations2d relations2d = null;
List <object> OriginArray = new List <object>();
SolidEdgePart.LoftedCutouts loftedCutouts = null;
SolidEdgePart.LoftedCutout loftedCutout = null;
SolidEdgeFramework.SelectSet selectSet = null;
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the documents collection.
documents = application.Documents;
// Create a new part document.
partDocument = documents.AddPartDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Get a reference to the RefPlanes collection.
refPlanes = partDocument.RefPlanes;
// Get a reference to top RefPlane.
refPlane = refPlanes.GetTopPlane();
// Get a reference to the ProfileSets collection.
profileSets = partDocument.ProfileSets;
// Add new ProfileSet.
profileSet = profileSets.Add();
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
// Get a reference to the Models collection.
models = partDocument.Models;
#region Base Profile
List <double[]> linesArray = new List <double[]>();
linesArray.Add(new double[] { 0, 0, 0.1, 0 });
linesArray.Add(new double[] { 0.1, 0, 0.1, 0.1 });
linesArray.Add(new double[] { 0.1, 0.1, 0, 0.1 });
linesArray.Add(new double[] { 0, 0.1, 0, 0 });
// Call helper method to create the actual geometry.
model = PartHelper.CreateFiniteExtrudedProtrusion(partDocument, refPlane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.1);
#endregion
#region CrossSection Profile #1
refPlane = refPlanes.AddParallelByDistance(
ParentPlane: refPlanes.GetRightPlane(),
Distance: 0.1,
NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide,
Local: true);
// Add new ProfileSet.
profileSet = profileSets.Add();
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
crossSectionProfiles.Add(profiles.Add(refPlane));
OriginArray.Add(new double[] { 0.03, 0.03 });
lines2d = crossSectionProfiles[0].Lines2d;
lines2d.AddBy2Points(0.03, 0.03, 0.07, 0.03);
lines2d.AddBy2Points(0.07, 0.03, 0.07, 0.07);
lines2d.AddBy2Points(0.07, 0.07, 0.03, 0.07);
lines2d.AddBy2Points(0.03, 0.07, 0.03, 0.03);
relations2d = (SolidEdgeFrameworkSupport.Relations2d)crossSectionProfiles[0].Relations2d;
relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
crossSectionProfiles[0].End(SolidEdgePart.ProfileValidationType.igProfileClosed);
crossSectionProfiles[0].Visible = false;
#endregion
#region CrossSection Profile #2
refPlane = refPlanes.AddParallelByDistance(
ParentPlane: refPlanes.GetRightPlane(),
Distance: 0.05,
NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide,
Local: true);
// Add new ProfileSet.
profileSet = profileSets.Add();
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
crossSectionProfiles.Add(profiles.Add(refPlane));
OriginArray.Add(new double[] { 0.0, 0.0 });
circles2d = crossSectionProfiles[1].Circles2d;
circles2d.AddByCenterRadius(0.05, 0.05, 0.015);
crossSectionProfiles[1].End(SolidEdgePart.ProfileValidationType.igProfileClosed);
crossSectionProfiles[1].Visible = false;
#endregion
#region CrossSection Profile #3
refPlane = refPlanes.AddParallelByDistance(
ParentPlane: refPlanes.GetRightPlane(),
Distance: 0,
NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide,
Local: true);
// Add new ProfileSet.
profileSet = profileSets.Add();
// Get a reference to the Profiles collection.
profiles = profileSet.Profiles;
crossSectionProfiles.Add(profiles.Add(refPlane));
OriginArray.Add(new double[] { 0.03, 0.03 });
lines2d = crossSectionProfiles[2].Lines2d;
lines2d.AddBy2Points(0.03, 0.03, 0.07, 0.03);
lines2d.AddBy2Points(0.07, 0.03, 0.07, 0.07);
lines2d.AddBy2Points(0.07, 0.07, 0.03, 0.07);
lines2d.AddBy2Points(0.03, 0.07, 0.03, 0.03);
relations2d = (SolidEdgeFrameworkSupport.Relations2d)crossSectionProfiles[2].Relations2d;
relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
crossSectionProfiles[2].End(SolidEdgePart.ProfileValidationType.igProfileClosed);
crossSectionProfiles[2].Visible = false;
#endregion
// Get a reference to the LoftedCutouts collection.
loftedCutouts = model.LoftedCutouts;
// Build cross section type array.
List <object> crossSectionTypes = new List <object>();
crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
// Create the lofted cutout.
loftedCutout = loftedCutouts.AddSimple(crossSectionProfiles.Count,
crossSectionProfiles.ToArray(),
crossSectionTypes.ToArray(),
OriginArray.ToArray(),
SolidEdgePart.FeaturePropertyConstants.igLeft,
SolidEdgePart.FeaturePropertyConstants.igNone,
SolidEdgePart.FeaturePropertyConstants.igNone);
// Get a reference to the ActiveSelectSet.
selectSet = application.ActiveSelectSet;
// Empty ActiveSelectSet.
selectSet.RemoveAll();
// Add new LoftedCutout to ActiveSelectSet.
selectSet.Add(loftedCutout);
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void Main(string[] args)
{
SolidEdgeFramework.Application application = null;
SolidEdgeFramework.Documents documents = null;
SolidEdgePart.PartDocument partDocument = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgePart.Sketchs sketches = null;
SolidEdgePart.Sketch sketch = null;
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.ProfileSets profileSets = null;
SolidEdgePart.ProfileSet profileSet = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile sketchProfile = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
List <SolidEdgePart.Profile> listPaths = new List <SolidEdgePart.Profile>();
List <SolidEdgePart.FeaturePropertyConstants> listPathTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
List <SolidEdgePart.Profile> listSections = new List <SolidEdgePart.Profile>();
List <SolidEdgePart.FeaturePropertyConstants> listSectionTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
List <int> listOrigins = new List <int>();
try
{
// Register with OLE to handle concurrency issues on the current thread.
SolidEdgeCommunity.OleMessageFilter.Register();
// Connect to or start Solid Edge.
application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);
// Get a reference to the Documents collection.
documents = application.Documents;
// Create a new PartDocument.
partDocument = documents.AddPartDocument();
// Always a good idea to give SE a chance to breathe.
application.DoIdle();
// Get a reference to the models collection.
models = (SolidEdgePart.Models)partDocument.Models;
// Get a reference to the Sketches collections.
sketches = (SolidEdgePart.Sketchs)partDocument.Sketches;
// Get a reference to the profile sets collection.
profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets;
// Get a reference to the ref planes collection.
refPlanes = (SolidEdgePart.RefPlanes)partDocument.RefPlanes;
// Get a reference to front RefPlane.
refPlane = refPlanes.GetFrontPlane();
// Add a new sketch.
sketch = (SolidEdgePart.Sketch)sketches.Add();
// Add profile for sketch on specified refplane.
sketchProfile = sketch.Profiles.Add(refPlane);
// Get a reference to the Circles2d collection.
circles2d = sketchProfile.Circles2d;
// Draw the Base Profile.
circles2d.AddByCenterRadius(0, 0, 0.02);
// Close the profile.
sketchProfile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Arrays for AddSweptProtrusion().
listPaths.Add(sketchProfile);
listPathTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
// NOTE: profile is the Curve.
refPlane = refPlanes.AddNormalToCurve(
sketchProfile,
SolidEdgePart.ReferenceElementConstants.igCurveEnd,
refPlanes.GetFrontPlane(),
SolidEdgePart.ReferenceElementConstants.igPivotEnd,
true,
System.Reflection.Missing.Value);
// Add a new profile set.
profileSet = (SolidEdgePart.ProfileSet)profileSets.Add();
// Get a reference to the profiles collection.
profiles = (SolidEdgePart.Profiles)profileSet.Profiles;
// add a new profile.
profile = (SolidEdgePart.Profile)profiles.Add(refPlane);
// Get a reference to the Circles2d collection.
circles2d = profile.Circles2d;
// Draw the Base Profile.
circles2d.AddByCenterRadius(0, 0, 0.01);
// Close the profile.
profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);
// Arrays for AddSweptProtrusion().
listSections.Add(profile);
listSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
listOrigins.Add(0); //Use 0 for closed profiles.
// Create the extended protrusion.
model = models.AddSweptProtrusion(
listPaths.Count,
listPaths.ToArray(),
listPathTypes.ToArray(),
listSections.Count,
listSections.ToArray(),
listSectionTypes.ToArray(),
listOrigins.ToArray(),
0,
SolidEdgePart.FeaturePropertyConstants.igLeft,
SolidEdgePart.FeaturePropertyConstants.igNone,
0.0,
null,
SolidEdgePart.FeaturePropertyConstants.igNone,
0.0,
null);
// Hide profiles.
sketchProfile.Visible = false;
profile.Visible = false;
// Switch to ISO view.
application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
}
catch (System.Exception ex)
{
Console.WriteLine(ex.Message);
}
finally
{
SolidEdgeCommunity.OleMessageFilter.Unregister();
}
}
static void CreateExtrudedCutout(SolidEdgePart.SheetMetalDocument sheetMetalDocument)
{
SolidEdgePart.RefPlanes refPlanes = null;
SolidEdgePart.RefPlane refPlane = null;
SolidEdgePart.Sketchs sketchs = null;
SolidEdgePart.Sketch sketch = null;
SolidEdgePart.Profiles profiles = null;
SolidEdgePart.Profile profile = null;
SolidEdgeFrameworkSupport.Circles2d circles2d = null;
SolidEdgeFrameworkSupport.Circle2d circle2d = null;
SolidEdgePart.Models models = null;
SolidEdgePart.Model model = null;
SolidEdgePart.ExtrudedCutouts extrudedCutouts = null;
SolidEdgePart.ExtrudedCutout extrudedCutout = null;
List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();
double finiteDepth1 = 0.5;
// Get refplane.
refPlanes = sheetMetalDocument.RefPlanes;
refPlane = refPlanes.Item(2);
// Create 2nd sketch.
sketchs = sheetMetalDocument.Sketches;
sketch = sketchs.Add();
// Create profile.
profiles = sketch.Profiles;
profile = profiles.Add(refPlane);
// Create 2D circle.
circles2d = profile.Circles2d;
circle2d = circles2d.AddByCenterRadius(0, 0, 0.025);
profile.Visible = false;
profileList.Add(profile);
models = sheetMetalDocument.Models;
model = models.Item(1);
extrudedCutouts = model.ExtrudedCutouts;
extrudedCutout = extrudedCutouts.Add(
profileList.Count,
profileList.ToArray(),
SolidEdgePart.FeaturePropertyConstants.igLeft,
SolidEdgePart.FeaturePropertyConstants.igFinite,
SolidEdgePart.FeaturePropertyConstants.igSymmetric,
finiteDepth1,
null,
SolidEdgePart.KeyPointExtentConstants.igTangentNormal,
null,
SolidEdgePart.OffsetSideConstants.seOffsetNone,
0,
SolidEdgePart.TreatmentTypeConstants.seTreatmentNone,
SolidEdgePart.DraftSideConstants.seDraftNone,
0,
SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownNone,
SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideNone,
SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureNone,
0,
0,
SolidEdgePart.FeaturePropertyConstants.igNone,
SolidEdgePart.FeaturePropertyConstants.igNone,
0,
null,
SolidEdgePart.KeyPointExtentConstants.igTangentNormal,
null,
SolidEdgePart.OffsetSideConstants.seOffsetNone,
0,
SolidEdgePart.TreatmentTypeConstants.seTreatmentNone,
SolidEdgePart.DraftSideConstants.seDraftNone,
0,
SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownNone,
SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideNone,
SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureNone,
0,
0);
}
