static void CreateExtrudedProtrusion(SolidEdgePart.SheetMetalDocument sheetMetalDocument)
        {
            SolidEdgePart.RefPlanes             refPlanes = null;
            SolidEdgePart.RefPlane              refPlane  = null;
            SolidEdgePart.Sketchs               sketchs   = null;
            SolidEdgePart.Sketch                sketch    = null;
            SolidEdgePart.Profiles              profiles  = null;
            SolidEdgePart.Profile               profile   = null;
            SolidEdgeFrameworkSupport.Circles2d circles2d = null;
            SolidEdgeFrameworkSupport.Circle2d  circle2d  = null;
            SolidEdgePart.Models                models    = null;
            SolidEdgePart.Model model = null;

            // Get refplane.
            refPlanes = sheetMetalDocument.RefPlanes;
            refPlane  = refPlanes.Item(2);

            // Create sketch.
            sketchs = sheetMetalDocument.Sketches;
            sketch  = sketchs.Add();

            // Create profile.
            profiles = sketch.Profiles;
            profile  = profiles.Add(refPlane);

            // Create 2D circle.
            circles2d = profile.Circles2d;
            circle2d  = circles2d.AddByCenterRadius(0, 0, 0.05);

            profile.Visible = false;

            // Create extruded protrusion.
            models = sheetMetalDocument.Models;
            model  = models.AddBaseTab(profile, SolidEdgePart.FeaturePropertyConstants.igRight);
        }
Beispiel #2
0
        static void Main(string[] args)
        {
            SolidEdgeFramework.Application       application   = null;
            SolidEdgeFramework.Documents         documents     = null;
            SolidEdgeDraft.DraftDocument         draftDocument = null;
            SolidEdgeDraft.Sheet                 sheet         = null;
            SolidEdgeFrameworkSupport.Circles2d  circles2d     = null;
            SolidEdgeFrameworkSupport.Circle2d   circle2d      = null;
            SolidEdgeFrameworkSupport.Dimensions dimensions    = null;

            try
            {
                // Register with OLE to handle concurrency issues on the current thread.
                SolidEdgeCommunity.OleMessageFilter.Register();

                // Connect to or start Solid Edge.
                application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);

                // Get a reference to the documents collection.
                documents = application.Documents;

                // Create a new draft document.
                draftDocument = documents.AddDraftDocument();

                // Get a reference to the active sheet.
                sheet = draftDocument.ActiveSheet;

                // Get a reference to the Circles2d collection.
                circles2d = sheet.Circles2d;

                // Get a reference to the Dimensions collection.
                dimensions = (SolidEdgeFrameworkSupport.Dimensions)sheet.Dimensions;

                double x      = 0.1;
                double y      = 0.1;
                double radius = 0.01;

                for (int i = 0; i < 5; i++)
                {
                    // Add the circle.
                    circle2d = circles2d.AddByCenterRadius(x, y, radius);

                    // Dimension the circle.
                    dimensions.AddRadialDiameter(circle2d);

                    x      += 0.05;
                    y      += 0.05;
                    radius += 0.01;
                }
            }
            catch (System.Exception ex)
            {
                Console.WriteLine(ex.Message);
            }
            finally
            {
                SolidEdgeCommunity.OleMessageFilter.Unregister();
            }
        }
Beispiel #3
0
        static void Main(string[] args)
        {
            SolidEdgeFramework.Application            application     = null;
            SolidEdgeFramework.Documents              documents       = null;
            SolidEdgeDraft.DraftDocument              draftDocument   = null;
            SolidEdgeDraft.Sheet                      sheet           = null;
            SolidEdgeFrameworkSupport.Circles2d       circles2d       = null;
            SolidEdgeFrameworkSupport.Circle2d        circle2d        = null;
            SolidEdgeFrameworkSupport.GeometryStyle2d geometryStyle2d = null;

            try
            {
                // Register with OLE to handle concurrency issues on the current thread.
                SolidEdgeCommunity.OleMessageFilter.Register();

                // Connect to or start Solid Edge.
                application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);

                // Get a reference to the Documents collection.
                documents = application.Documents;

                // Create a new draft document.
                draftDocument = documents.AddDraftDocument();

                // Get a reference to the active sheet.
                sheet = draftDocument.ActiveSheet;

                // Get a reference to the Circles2d collection.
                circles2d = sheet.Circles2d;

                // Add the circle.
                circle2d = circles2d.AddByCenterRadius(0.2, 0.2, 0.1);

                // Get a reference to the GeometryStyle2d to modify the style.
                geometryStyle2d = circle2d.Style;
            }
            catch (System.Exception ex)
            {
                Console.WriteLine(ex.Message);
            }
            finally
            {
                SolidEdgeCommunity.OleMessageFilter.Unregister();
            }
        }
Beispiel #4
0
    public static SolidEdgePart.Model CreateBaseTabByCircle(SolidEdgePart.SheetMetalDocument sheetMetalDocument)
    {
        SolidEdgePart.RefPlanes             refPlanes = null;
        SolidEdgePart.RefPlane              refPlane  = null;
        SolidEdgePart.Sketchs               sketchs   = null;
        SolidEdgePart.Sketch                sketch    = null;
        SolidEdgePart.Profiles              profiles  = null;
        SolidEdgePart.Profile               profile   = null;
        SolidEdgeFrameworkSupport.Circles2d circles2d = null;
        SolidEdgeFrameworkSupport.Circle2d  circle2d  = null;
        SolidEdgePart.Models                models    = null;
        SolidEdgePart.Model model = null;
        double x      = 0;
        double y      = 0;
        double radius = 0.05;

        // Get refplane.
        refPlanes = sheetMetalDocument.RefPlanes;

        // Get a reference to front RefPlane.
        refPlane = refPlanes.GetFrontPlane();

        // Create sketch.
        sketchs = sheetMetalDocument.Sketches;
        sketch  = sketchs.Add();

        // Create profile.
        profiles = sketch.Profiles;
        profile  = profiles.Add(refPlane);

        // Create 2D circle.
        circles2d = profile.Circles2d;
        circle2d  = circles2d.AddByCenterRadius(x, y, radius);

        // Hide profile.
        profile.Visible = false;

        // Create extruded protrusion.
        models = sheetMetalDocument.Models;
        model  = models.AddBaseTab(profile, SolidEdgePart.FeaturePropertyConstants.igRight);

        return(model);
    }
Beispiel #5
0
    public static SolidEdgePart.Model CreateSweptProtrusion(SolidEdgePart.PartDocument partDocument)
    {
        SolidEdgePart.Models                models        = null;
        SolidEdgePart.Model                 model         = null;
        SolidEdgePart.Sketchs               sketches      = null;
        SolidEdgePart.Sketch                sketch        = null;
        SolidEdgePart.RefPlanes             refPlanes     = null;
        SolidEdgePart.RefPlane              refPlane      = null;
        SolidEdgePart.ProfileSets           profileSets   = null;
        SolidEdgePart.ProfileSet            profileSet    = null;
        SolidEdgePart.Profiles              profiles      = null;
        SolidEdgePart.Profile               sketchProfile = null;
        SolidEdgePart.Profile               profile       = null;
        SolidEdgeFrameworkSupport.Circles2d circles2d     = null;

        List <SolidEdgePart.Profile> listPaths = new List <SolidEdgePart.Profile>();
        List <SolidEdgePart.FeaturePropertyConstants> listPathTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
        List <SolidEdgePart.Profile> listSections = new List <SolidEdgePart.Profile>();
        List <SolidEdgePart.FeaturePropertyConstants> listSectionTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
        List <int> listOrigins = new List <int>();

        // Get a reference to the models collection.
        models = (SolidEdgePart.Models)partDocument.Models;

        // Get a reference to the Sketches collections.
        sketches = (SolidEdgePart.Sketchs)partDocument.Sketches;

        // Get a reference to the profile sets collection.
        profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets;

        // Get a reference to the ref planes collection.
        refPlanes = (SolidEdgePart.RefPlanes)partDocument.RefPlanes;

        // Get a reference to front RefPlane.
        refPlane = refPlanes.GetFrontPlane();

        // Add a new sketch.
        sketch = (SolidEdgePart.Sketch)sketches.Add();

        // Add profile for sketch on specified refplane.
        sketchProfile = sketch.Profiles.Add(refPlane);

        // Get a reference to the Circles2d collection.
        circles2d = sketchProfile.Circles2d;

        // Draw the Base Profile.
        circles2d.AddByCenterRadius(0, 0, 0.02);

        // Close the profile.
        sketchProfile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

        // Arrays for AddSweptProtrusion().
        listPaths.Add(sketchProfile);
        listPathTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);

        // NOTE: profile is the Curve.
        refPlane = refPlanes.AddNormalToCurve(
            sketchProfile,
            SolidEdgePart.ReferenceElementConstants.igCurveEnd,
            refPlanes.GetFrontPlane(),
            SolidEdgePart.ReferenceElementConstants.igPivotEnd,
            true,
            System.Reflection.Missing.Value);

        // Add a new profile set.
        profileSet = (SolidEdgePart.ProfileSet)profileSets.Add();

        // Get a reference to the profiles collection.
        profiles = (SolidEdgePart.Profiles)profileSet.Profiles;

        // add a new profile.
        profile = (SolidEdgePart.Profile)profiles.Add(refPlane);

        // Get a reference to the Circles2d collection.
        circles2d = profile.Circles2d;

        // Draw the Base Profile.
        circles2d.AddByCenterRadius(0, 0, 0.01);

        // Close the profile.
        profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

        // Arrays for AddSweptProtrusion().
        listSections.Add(profile);
        listSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
        listOrigins.Add(0); //Use 0 for closed profiles.

        // Create the extended protrusion.
        model = models.AddSweptProtrusion(
            listPaths.Count,
            listPaths.ToArray(),
            listPathTypes.ToArray(),
            listSections.Count,
            listSections.ToArray(),
            listSectionTypes.ToArray(),
            listOrigins.ToArray(),
            0,
            SolidEdgePart.FeaturePropertyConstants.igLeft,
            SolidEdgePart.FeaturePropertyConstants.igNone,
            0.0,
            null,
            SolidEdgePart.FeaturePropertyConstants.igNone,
            0.0,
            null);

        // Hide profiles.
        sketchProfile.Visible = false;
        profile.Visible       = false;

        return(model);
    }
Beispiel #6
0
        static void Main(string[] args)
        {
            SolidEdgeFramework.Application      application  = null;
            SolidEdgeFramework.Documents        documents    = null;
            SolidEdgePart.PartDocument          partDocument = null;
            SolidEdgePart.RefPlanes             refPlanes    = null;
            SolidEdgePart.RefPlane              refPlane     = null;
            SolidEdgePart.Sketchs               sketches     = null;
            SolidEdgePart.Sketch                sketch       = null;
            SolidEdgePart.Profiles              profiles     = null;
            SolidEdgePart.Profile               profile      = null;
            SolidEdgeFrameworkSupport.Circles2d circles2d    = null;
            SolidEdgeFrameworkSupport.Circle2d  circle2d     = null;
            SolidEdgeFramework.SelectSet        selectSet    = null;

            try
            {
                // Register with OLE to handle concurrency issues on the current thread.
                SolidEdgeCommunity.OleMessageFilter.Register();

                // Connect to or start Solid Edge.
                application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);

                // Get a reference to the documents collection.
                documents = application.Documents;

                // Create a new part document.
                partDocument = documents.AddPartDocument();

                // Always a good idea to give SE a chance to breathe.
                application.DoIdle();

                // Get a reference to the RefPlanes collection.
                refPlanes = partDocument.RefPlanes;

                // Get a reference to front RefPlane.
                refPlane = refPlanes.GetFrontPlane();

                // Get a reference to the Sketches collection.
                sketches = partDocument.Sketches;

                // Create a new sketch.
                sketch = sketches.Add();

                // Get a reference to the Profiles collection.
                profiles = sketch.Profiles;

                // Create a new profile.
                profile = profiles.Add(refPlane);

                circles2d = profile.Circles2d;

                circle2d = circles2d.AddByCenterRadius(0.04, 0.05, 0.02);

                profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

                // Get a reference to the ActiveSelectSet.
                selectSet = application.ActiveSelectSet;

                // Empty ActiveSelectSet.
                selectSet.RemoveAll();

                // Add new FaceRotate to ActiveSelectSet.
                selectSet.Add(circle2d);

                // Switch to ISO view.
                application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
            }
            catch (System.Exception ex)
            {
                Console.WriteLine(ex.Message);
            }
            finally
            {
                SolidEdgeCommunity.OleMessageFilter.Unregister();
            }
        }
Beispiel #7
0
        static void Main(string[] args)
        {
            SolidEdgeFramework.Application      application        = null;
            SolidEdgeFramework.Documents        documents          = null;
            SolidEdgePart.SheetMetalDocument    sheetMetalDocument = null;
            SolidEdgePart.RefPlanes             refPlanes          = null;
            SolidEdgePart.RefPlane              refPlane           = null;
            SolidEdgePart.Sketchs               sketchs            = null;
            SolidEdgePart.Sketch                sketch             = null;
            SolidEdgePart.Profiles              profiles           = null;
            SolidEdgePart.Profile               profile            = null;
            SolidEdgeFrameworkSupport.Circles2d circles2d          = null;
            SolidEdgeFrameworkSupport.Circle2d  circle2d           = null;
            SolidEdgePart.Model           model           = null;
            SolidEdgePart.ExtrudedCutouts extrudedCutouts = null;
            SolidEdgePart.ExtrudedCutout  extrudedCutout  = null;
            List <SolidEdgePart.Profile>  profileList     = new List <SolidEdgePart.Profile>();
            double finiteDepth1 = 0.5;

            SolidEdgeFramework.SelectSet selectSet = null;

            try
            {
                // Register with OLE to handle concurrency issues on the current thread.
                SolidEdgeCommunity.OleMessageFilter.Register();

                // Connect to or start Solid Edge.
                application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);

                // Get a reference to the Documents collection.
                documents = application.Documents;

                // Create a new sheetmetal document.
                sheetMetalDocument = documents.AddSheetMetalDocument();

                // Always a good idea to give SE a chance to breathe.
                application.DoIdle();

                // Call helper method to create the actual geometry.
                model = SheetMetalHelper.CreateBaseTabByCircle(sheetMetalDocument);

                // Get a reference to the RefPlanes collection.
                refPlanes = sheetMetalDocument.RefPlanes;

                // Get a reference to right RefPlane.
                refPlane = refPlanes.GetRightPlane();

                // Get a reference to the Sketches collection.
                sketchs = sheetMetalDocument.Sketches;

                // Add a new Sketch.
                sketch = sketchs.Add();

                // Get a reference to the Profiles collection.
                profiles = sketch.Profiles;

                // Add a new Profile.
                profile = profiles.Add(refPlane);

                profileList.Add(profile);

                // Create 2D circle.
                circles2d = profile.Circles2d;
                circle2d  = circles2d.AddByCenterRadius(0, 0, 0.025);

                profile.Visible = false;

                // Get a reference to the ExtrudedCutouts collection.
                extrudedCutouts = model.ExtrudedCutouts;

                // Add a new ExtrudedCutout.
                extrudedCutout = extrudedCutouts.Add(
                    profileList.Count,
                    profileList.ToArray(),
                    SolidEdgePart.FeaturePropertyConstants.igLeft,
                    SolidEdgePart.FeaturePropertyConstants.igFinite,
                    SolidEdgePart.FeaturePropertyConstants.igSymmetric,
                    finiteDepth1,
                    null,
                    SolidEdgePart.KeyPointExtentConstants.igTangentNormal,
                    null,
                    SolidEdgePart.OffsetSideConstants.seOffsetNone,
                    0,
                    SolidEdgePart.TreatmentTypeConstants.seTreatmentNone,
                    SolidEdgePart.DraftSideConstants.seDraftNone,
                    0,
                    SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownNone,
                    SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideNone,
                    SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureNone,
                    0,
                    0,
                    SolidEdgePart.FeaturePropertyConstants.igNone,
                    SolidEdgePart.FeaturePropertyConstants.igNone,
                    0,
                    null,
                    SolidEdgePart.KeyPointExtentConstants.igTangentNormal,
                    null,
                    SolidEdgePart.OffsetSideConstants.seOffsetNone,
                    0,
                    SolidEdgePart.TreatmentTypeConstants.seTreatmentNone,
                    SolidEdgePart.DraftSideConstants.seDraftNone,
                    0,
                    SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownNone,
                    SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideNone,
                    SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureNone,
                    0,
                    0);

                // Get a reference to the ActiveSelectSet.
                selectSet = application.ActiveSelectSet;

                // Empty ActiveSelectSet.
                selectSet.RemoveAll();

                // Add new ExtrudedCutout to ActiveSelectSet.
                selectSet.Add(extrudedCutout);

                // Switch to ISO view.
                application.StartCommand(SolidEdgeConstants.SheetMetalCommandConstants.SheetMetalViewISOView);
            }
            catch (System.Exception ex)
            {
                Console.WriteLine(ex.Message);
            }
            finally
            {
                SolidEdgeCommunity.OleMessageFilter.Unregister();
            }
        }
Beispiel #8
0
        static void Main(string[] args)
        {
            SolidEdgeFramework.Application      application      = null;
            SolidEdgeFramework.Documents        documents        = null;
            SolidEdgePart.PartDocument          partDocument     = null;
            SolidEdgePart.RefPlanes             refPlanes        = null;
            SolidEdgePart.RefPlane              refPlane         = null;
            SolidEdgePart.Sketchs               sketches         = null;
            SolidEdgePart.Sketch                sketch           = null;
            SolidEdgePart.Profiles              profiles         = null;
            SolidEdgePart.Profile               profile          = null;
            SolidEdgeFrameworkSupport.Circles2d circles2d        = null;
            SolidEdgeFrameworkSupport.Circle2d  circle2d         = null;
            SolidEdgePart.Constructions         constructions    = null;
            SolidEdgePart.ExtrudedSurfaces      extrudedSurfaces = null;
            SolidEdgePart.ExtrudedSurface       extrudedSurface  = null;
            SolidEdgeFramework.SelectSet        selectSet        = null;

            try
            {
                // Register with OLE to handle concurrency issues on the current thread.
                SolidEdgeCommunity.OleMessageFilter.Register();

                // Connect to or start Solid Edge.
                application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);

                // Get a reference to the Documents collection.
                documents = application.Documents;

                // Create a new part document.
                partDocument = documents.AddPartDocument();

                // Always a good idea to give SE a chance to breathe.
                application.DoIdle();

                // Get a reference to the RefPlanes collection.
                refPlanes = partDocument.RefPlanes;

                // Get a reference to front RefPlane.
                refPlane = refPlanes.GetFrontPlane();

                // Get a reference to the Sketches collection.
                sketches = partDocument.Sketches;

                // Create a new sketch.
                sketch = sketches.Add();

                // Get a reference to the Profiles collection.
                profiles = sketch.Profiles;

                // Create a new profile.
                profile = profiles.Add(refPlane);

                circles2d = profile.Circles2d;

                circle2d = circles2d.AddByCenterRadius(0.04, 0.05, 0.02);

                profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

                // Get a reference to the Constructions collection.
                constructions = partDocument.Constructions;

                // Get a reference to the ExtrudedSurfaces collection.
                extrudedSurfaces = constructions.ExtrudedSurfaces;

                // These parameter variables are declared because we have to pass them as pointers.
                SolidEdgePart.KeyPointExtentConstants KeyPointFlags1 = SolidEdgePart.KeyPointExtentConstants.igTangentNormal;
                SolidEdgePart.KeyPointExtentConstants KeyPointFlags2 = SolidEdgePart.KeyPointExtentConstants.igTangentNormal;

                List <SolidEdgePart.Profile> profileList = new List <SolidEdgePart.Profile>();

                for (int i = 1; i <= profiles.Count; i++)
                {
                    profileList.Add(profiles.Item(i));
                }

                Array profileArray = profileList.ToArray();

                // Add a new ExtrudedSurface.
                extrudedSurface = extrudedSurfaces.Add(
                    NumberOfProfiles: profileArray.Length,
                    ProfileArray: ref profileArray,
                    ExtentType1: SolidEdgePart.FeaturePropertyConstants.igFinite,
                    ExtentSide1: SolidEdgePart.FeaturePropertyConstants.igRight,
                    FiniteDepth1: 0.0127,
                    KeyPointOrTangentFace1: null,
                    KeyPointFlags1: ref KeyPointFlags1,
                    FromFaceOrRefPlane: null,
                    FromFaceOffsetSide: SolidEdgePart.OffsetSideConstants.seOffsetNone,
                    FromFaceOffsetDistance: 0,
                    TreatmentType1: SolidEdgePart.TreatmentTypeConstants.seTreatmentCrown,
                    TreatmentDraftSide1: SolidEdgePart.DraftSideConstants.seDraftInside,
                    TreatmentDraftAngle1: 0.1,
                    TreatmentCrownType1: SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownByOffset,
                    TreatmentCrownSide1: SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideInside,
                    TreatmentCrownCurvatureSide1: SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureInside,
                    TreatmentCrownRadiusOrOffset1: 0.003,
                    TreatmentCrownTakeOffAngle1: 0,
                    ExtentType2: SolidEdgePart.FeaturePropertyConstants.igFinite,
                    ExtentSide2: SolidEdgePart.FeaturePropertyConstants.igLeft,
                    FiniteDepth2: 0.0127,
                    KeyPointOrTangentFace2: null,
                    KeyPointFlags2: ref KeyPointFlags2,
                    ToFaceOrRefPlane: null,
                    ToFaceOffsetSide: SolidEdgePart.OffsetSideConstants.seOffsetNone,
                    ToFaceOffsetDistance: 0,
                    TreatmentType2: SolidEdgePart.TreatmentTypeConstants.seTreatmentCrown,
                    TreatmentDraftSide2: SolidEdgePart.DraftSideConstants.seDraftNone,
                    TreatmentDraftAngle2: 0,
                    TreatmentCrownType2: SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownByOffset,
                    TreatmentCrownSide2: SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideInside,
                    TreatmentCrownCurvatureSide2: SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureInside,
                    TreatmentCrownRadiusOrOffset2: 0.003,
                    TreatmentCrownTakeOffAngle2: 0,
                    WantEndCaps: true
                    );

                SolidEdgePart.FeaturePropertyConstants ExtentType;
                SolidEdgePart.FeaturePropertyConstants ExtentSide;
                double FiniteDepth = 0.0;
                SolidEdgePart.KeyPointExtentConstants KeyPointFlags = SolidEdgePart.KeyPointExtentConstants.igTangentNormal;

                // Get extent information for the first direction.
                extrudedSurface.GetDirection1Extent(out ExtentType, out ExtentSide, out FiniteDepth);

                // Modify parameters.
                FiniteDepth = 2.0;
                ExtentType  = SolidEdgePart.FeaturePropertyConstants.igFinite;
                ExtentSide  = SolidEdgePart.FeaturePropertyConstants.igRight;

                // Apply extent information for the first direction.
                extrudedSurface.ApplyDirection1Extent(
                    ExtentType,
                    ExtentSide,
                    FiniteDepth,
                    null,
                    ref KeyPointFlags);

                // Get a reference to the ActiveSelectSet.
                selectSet = application.ActiveSelectSet;

                // Empty ActiveSelectSet.
                selectSet.RemoveAll();

                // Add new FaceRotate to ActiveSelectSet.
                selectSet.Add(extrudedSurface);

                // Switch to ISO view.
                application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
            }
            catch (System.Exception ex)
            {
                Console.WriteLine(ex.Message);
            }
            finally
            {
                SolidEdgeCommunity.OleMessageFilter.Unregister();
            }
        }
Beispiel #9
0
        static void Main(string[] args)
        {
            SolidEdgeFramework.Application application          = null;
            SolidEdgeFramework.Documents   documents            = null;
            SolidEdgePart.PartDocument     partDocument         = null;
            SolidEdgePart.RefPlanes        refPlanes            = null;
            SolidEdgePart.RefPlane         refPlane             = null;
            SolidEdgePart.Models           models               = null;
            SolidEdgePart.Model            model                = null;
            SolidEdgePart.ProfileSets      profileSets          = null;
            SolidEdgePart.ProfileSet       profileSet           = null;
            SolidEdgePart.Profiles         profiles             = null;
            List <SolidEdgePart.Profile>   crossSectionProfiles = new List <SolidEdgePart.Profile>();

            SolidEdgeFrameworkSupport.Lines2d     lines2d     = null;
            SolidEdgeFrameworkSupport.Circles2d   circles2d   = null;
            SolidEdgeFrameworkSupport.Relations2d relations2d = null;
            List <object> OriginArray = new List <object>();

            SolidEdgePart.LoftedCutouts  loftedCutouts = null;
            SolidEdgePart.LoftedCutout   loftedCutout  = null;
            SolidEdgeFramework.SelectSet selectSet     = null;

            try
            {
                // Register with OLE to handle concurrency issues on the current thread.
                SolidEdgeCommunity.OleMessageFilter.Register();

                // Connect to or start Solid Edge.
                application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);

                // Get a reference to the documents collection.
                documents = application.Documents;

                // Create a new part document.
                partDocument = documents.AddPartDocument();

                // Always a good idea to give SE a chance to breathe.
                application.DoIdle();

                // Get a reference to the RefPlanes collection.
                refPlanes = partDocument.RefPlanes;

                // Get a reference to top RefPlane.
                refPlane = refPlanes.GetTopPlane();

                // Get a reference to the ProfileSets collection.
                profileSets = partDocument.ProfileSets;

                // Add new ProfileSet.
                profileSet = profileSets.Add();

                // Get a reference to the Profiles collection.
                profiles = profileSet.Profiles;

                // Get a reference to the Models collection.
                models = partDocument.Models;

                #region Base Profile

                List <double[]> linesArray = new List <double[]>();
                linesArray.Add(new double[] { 0, 0, 0.1, 0 });
                linesArray.Add(new double[] { 0.1, 0, 0.1, 0.1 });
                linesArray.Add(new double[] { 0.1, 0.1, 0, 0.1 });
                linesArray.Add(new double[] { 0, 0.1, 0, 0 });

                // Call helper method to create the actual geometry.
                model = PartHelper.CreateFiniteExtrudedProtrusion(partDocument, refPlane, linesArray.ToArray(), SolidEdgePart.FeaturePropertyConstants.igRight, 0.1);

                #endregion

                #region CrossSection Profile #1

                refPlane = refPlanes.AddParallelByDistance(
                    ParentPlane: refPlanes.GetRightPlane(),
                    Distance: 0.1,
                    NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide,
                    Local: true);

                // Add new ProfileSet.
                profileSet = profileSets.Add();

                // Get a reference to the Profiles collection.
                profiles = profileSet.Profiles;

                crossSectionProfiles.Add(profiles.Add(refPlane));

                OriginArray.Add(new double[] { 0.03, 0.03 });

                lines2d = crossSectionProfiles[0].Lines2d;
                lines2d.AddBy2Points(0.03, 0.03, 0.07, 0.03);
                lines2d.AddBy2Points(0.07, 0.03, 0.07, 0.07);
                lines2d.AddBy2Points(0.07, 0.07, 0.03, 0.07);
                lines2d.AddBy2Points(0.03, 0.07, 0.03, 0.03);

                relations2d = (SolidEdgeFrameworkSupport.Relations2d)crossSectionProfiles[0].Relations2d;

                relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
                relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
                relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
                relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);

                crossSectionProfiles[0].End(SolidEdgePart.ProfileValidationType.igProfileClosed);

                crossSectionProfiles[0].Visible = false;

                #endregion

                #region CrossSection Profile #2

                refPlane = refPlanes.AddParallelByDistance(
                    ParentPlane: refPlanes.GetRightPlane(),
                    Distance: 0.05,
                    NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide,
                    Local: true);
                // Add new ProfileSet.
                profileSet = profileSets.Add();

                // Get a reference to the Profiles collection.
                profiles = profileSet.Profiles;

                crossSectionProfiles.Add(profiles.Add(refPlane));

                OriginArray.Add(new double[] { 0.0, 0.0 });

                circles2d = crossSectionProfiles[1].Circles2d;
                circles2d.AddByCenterRadius(0.05, 0.05, 0.015);

                crossSectionProfiles[1].End(SolidEdgePart.ProfileValidationType.igProfileClosed);

                crossSectionProfiles[1].Visible = false;

                #endregion

                #region CrossSection Profile #3

                refPlane = refPlanes.AddParallelByDistance(
                    ParentPlane: refPlanes.GetRightPlane(),
                    Distance: 0,
                    NormalSide: SolidEdgePart.ReferenceElementConstants.igNormalSide,
                    Local: true);

                // Add new ProfileSet.
                profileSet = profileSets.Add();

                // Get a reference to the Profiles collection.
                profiles = profileSet.Profiles;

                crossSectionProfiles.Add(profiles.Add(refPlane));

                OriginArray.Add(new double[] { 0.03, 0.03 });

                lines2d = crossSectionProfiles[2].Lines2d;
                lines2d.AddBy2Points(0.03, 0.03, 0.07, 0.03);
                lines2d.AddBy2Points(0.07, 0.03, 0.07, 0.07);
                lines2d.AddBy2Points(0.07, 0.07, 0.03, 0.07);
                lines2d.AddBy2Points(0.03, 0.07, 0.03, 0.03);

                relations2d = (SolidEdgeFrameworkSupport.Relations2d)crossSectionProfiles[2].Relations2d;

                relations2d.AddKeypoint(lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
                relations2d.AddKeypoint(lines2d.Item(2), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
                relations2d.AddKeypoint(lines2d.Item(3), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);
                relations2d.AddKeypoint(lines2d.Item(4), (int)SolidEdgeConstants.KeypointIndexConstants.igLineEnd, lines2d.Item(1), (int)SolidEdgeConstants.KeypointIndexConstants.igLineStart);

                crossSectionProfiles[2].End(SolidEdgePart.ProfileValidationType.igProfileClosed);

                crossSectionProfiles[2].Visible = false;

                #endregion

                // Get a reference to the LoftedCutouts collection.
                loftedCutouts = model.LoftedCutouts;

                // Build cross section type array.
                List <object> crossSectionTypes = new List <object>();
                crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
                crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
                crossSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);

                // Create the lofted cutout.
                loftedCutout = loftedCutouts.AddSimple(crossSectionProfiles.Count,
                                                       crossSectionProfiles.ToArray(),
                                                       crossSectionTypes.ToArray(),
                                                       OriginArray.ToArray(),
                                                       SolidEdgePart.FeaturePropertyConstants.igLeft,
                                                       SolidEdgePart.FeaturePropertyConstants.igNone,
                                                       SolidEdgePart.FeaturePropertyConstants.igNone);

                // Get a reference to the ActiveSelectSet.
                selectSet = application.ActiveSelectSet;

                // Empty ActiveSelectSet.
                selectSet.RemoveAll();

                // Add new LoftedCutout to ActiveSelectSet.
                selectSet.Add(loftedCutout);

                // Switch to ISO view.
                application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
            }
            catch (System.Exception ex)
            {
                Console.WriteLine(ex.Message);
            }
            finally
            {
                SolidEdgeCommunity.OleMessageFilter.Unregister();
            }
        }
Beispiel #10
0
        static void Main(string[] args)
        {
            SolidEdgeFramework.Application      application   = null;
            SolidEdgeFramework.Documents        documents     = null;
            SolidEdgePart.PartDocument          partDocument  = null;
            SolidEdgePart.Models                models        = null;
            SolidEdgePart.Model                 model         = null;
            SolidEdgePart.Sketchs               sketches      = null;
            SolidEdgePart.Sketch                sketch        = null;
            SolidEdgePart.RefPlanes             refPlanes     = null;
            SolidEdgePart.RefPlane              refPlane      = null;
            SolidEdgePart.ProfileSets           profileSets   = null;
            SolidEdgePart.ProfileSet            profileSet    = null;
            SolidEdgePart.Profiles              profiles      = null;
            SolidEdgePart.Profile               sketchProfile = null;
            SolidEdgePart.Profile               profile       = null;
            SolidEdgeFrameworkSupport.Circles2d circles2d     = null;

            List <SolidEdgePart.Profile> listPaths = new List <SolidEdgePart.Profile>();
            List <SolidEdgePart.FeaturePropertyConstants> listPathTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
            List <SolidEdgePart.Profile> listSections = new List <SolidEdgePart.Profile>();
            List <SolidEdgePart.FeaturePropertyConstants> listSectionTypes = new List <SolidEdgePart.FeaturePropertyConstants>();
            List <int> listOrigins = new List <int>();

            try
            {
                // Register with OLE to handle concurrency issues on the current thread.
                SolidEdgeCommunity.OleMessageFilter.Register();

                // Connect to or start Solid Edge.
                application = SolidEdgeCommunity.SolidEdgeUtils.Connect(true, true);

                // Get a reference to the Documents collection.
                documents = application.Documents;

                // Create a new PartDocument.
                partDocument = documents.AddPartDocument();

                // Always a good idea to give SE a chance to breathe.
                application.DoIdle();

                // Get a reference to the models collection.
                models = (SolidEdgePart.Models)partDocument.Models;

                // Get a reference to the Sketches collections.
                sketches = (SolidEdgePart.Sketchs)partDocument.Sketches;

                // Get a reference to the profile sets collection.
                profileSets = (SolidEdgePart.ProfileSets)partDocument.ProfileSets;

                // Get a reference to the ref planes collection.
                refPlanes = (SolidEdgePart.RefPlanes)partDocument.RefPlanes;

                // Get a reference to front RefPlane.
                refPlane = refPlanes.GetFrontPlane();

                // Add a new sketch.
                sketch = (SolidEdgePart.Sketch)sketches.Add();

                // Add profile for sketch on specified refplane.
                sketchProfile = sketch.Profiles.Add(refPlane);

                // Get a reference to the Circles2d collection.
                circles2d = sketchProfile.Circles2d;

                // Draw the Base Profile.
                circles2d.AddByCenterRadius(0, 0, 0.02);

                // Close the profile.
                sketchProfile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

                // Arrays for AddSweptProtrusion().
                listPaths.Add(sketchProfile);
                listPathTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);

                // NOTE: profile is the Curve.
                refPlane = refPlanes.AddNormalToCurve(
                    sketchProfile,
                    SolidEdgePart.ReferenceElementConstants.igCurveEnd,
                    refPlanes.GetFrontPlane(),
                    SolidEdgePart.ReferenceElementConstants.igPivotEnd,
                    true,
                    System.Reflection.Missing.Value);

                // Add a new profile set.
                profileSet = (SolidEdgePart.ProfileSet)profileSets.Add();

                // Get a reference to the profiles collection.
                profiles = (SolidEdgePart.Profiles)profileSet.Profiles;

                // add a new profile.
                profile = (SolidEdgePart.Profile)profiles.Add(refPlane);

                // Get a reference to the Circles2d collection.
                circles2d = profile.Circles2d;

                // Draw the Base Profile.
                circles2d.AddByCenterRadius(0, 0, 0.01);

                // Close the profile.
                profile.End(SolidEdgePart.ProfileValidationType.igProfileClosed);

                // Arrays for AddSweptProtrusion().
                listSections.Add(profile);
                listSectionTypes.Add(SolidEdgePart.FeaturePropertyConstants.igProfileBasedCrossSection);
                listOrigins.Add(0); //Use 0 for closed profiles.

                // Create the extended protrusion.
                model = models.AddSweptProtrusion(
                    listPaths.Count,
                    listPaths.ToArray(),
                    listPathTypes.ToArray(),
                    listSections.Count,
                    listSections.ToArray(),
                    listSectionTypes.ToArray(),
                    listOrigins.ToArray(),
                    0,
                    SolidEdgePart.FeaturePropertyConstants.igLeft,
                    SolidEdgePart.FeaturePropertyConstants.igNone,
                    0.0,
                    null,
                    SolidEdgePart.FeaturePropertyConstants.igNone,
                    0.0,
                    null);

                // Hide profiles.
                sketchProfile.Visible = false;
                profile.Visible       = false;

                // Switch to ISO view.
                application.StartCommand(SolidEdgeConstants.PartCommandConstants.PartViewISOView);
            }
            catch (System.Exception ex)
            {
                Console.WriteLine(ex.Message);
            }
            finally
            {
                SolidEdgeCommunity.OleMessageFilter.Unregister();
            }
        }
        static void CreateExtrudedCutout(SolidEdgePart.SheetMetalDocument sheetMetalDocument)
        {
            SolidEdgePart.RefPlanes             refPlanes = null;
            SolidEdgePart.RefPlane              refPlane  = null;
            SolidEdgePart.Sketchs               sketchs   = null;
            SolidEdgePart.Sketch                sketch    = null;
            SolidEdgePart.Profiles              profiles  = null;
            SolidEdgePart.Profile               profile   = null;
            SolidEdgeFrameworkSupport.Circles2d circles2d = null;
            SolidEdgeFrameworkSupport.Circle2d  circle2d  = null;
            SolidEdgePart.Models                models    = null;
            SolidEdgePart.Model           model           = null;
            SolidEdgePart.ExtrudedCutouts extrudedCutouts = null;
            SolidEdgePart.ExtrudedCutout  extrudedCutout  = null;
            List <SolidEdgePart.Profile>  profileList     = new List <SolidEdgePart.Profile>();
            double finiteDepth1 = 0.5;

            // Get refplane.
            refPlanes = sheetMetalDocument.RefPlanes;
            refPlane  = refPlanes.Item(2);

            // Create 2nd sketch.
            sketchs = sheetMetalDocument.Sketches;
            sketch  = sketchs.Add();

            // Create profile.
            profiles = sketch.Profiles;
            profile  = profiles.Add(refPlane);

            // Create 2D circle.
            circles2d = profile.Circles2d;
            circle2d  = circles2d.AddByCenterRadius(0, 0, 0.025);

            profile.Visible = false;
            profileList.Add(profile);

            models = sheetMetalDocument.Models;
            model  = models.Item(1);

            extrudedCutouts = model.ExtrudedCutouts;
            extrudedCutout  = extrudedCutouts.Add(
                profileList.Count,
                profileList.ToArray(),
                SolidEdgePart.FeaturePropertyConstants.igLeft,
                SolidEdgePart.FeaturePropertyConstants.igFinite,
                SolidEdgePart.FeaturePropertyConstants.igSymmetric,
                finiteDepth1,
                null,
                SolidEdgePart.KeyPointExtentConstants.igTangentNormal,
                null,
                SolidEdgePart.OffsetSideConstants.seOffsetNone,
                0,
                SolidEdgePart.TreatmentTypeConstants.seTreatmentNone,
                SolidEdgePart.DraftSideConstants.seDraftNone,
                0,
                SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownNone,
                SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideNone,
                SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureNone,
                0,
                0,
                SolidEdgePart.FeaturePropertyConstants.igNone,
                SolidEdgePart.FeaturePropertyConstants.igNone,
                0,
                null,
                SolidEdgePart.KeyPointExtentConstants.igTangentNormal,
                null,
                SolidEdgePart.OffsetSideConstants.seOffsetNone,
                0,
                SolidEdgePart.TreatmentTypeConstants.seTreatmentNone,
                SolidEdgePart.DraftSideConstants.seDraftNone,
                0,
                SolidEdgePart.TreatmentCrownTypeConstants.seTreatmentCrownNone,
                SolidEdgePart.TreatmentCrownSideConstants.seTreatmentCrownSideNone,
                SolidEdgePart.TreatmentCrownCurvatureSideConstants.seTreatmentCrownCurvatureNone,
                0,
                0);
        }