private void CreateBase(List <MeshGroup> meshesList, List <ScaleRotateTranslate> meshTransforms, List <PlatingMeshGroupData> platingDataList)
{
if (meshesList.Count > 0)
{
AxisAlignedBoundingBox bounds = meshesList[0].GetAxisAlignedBoundingBox(meshTransforms[0].TotalTransform);
for (int i = 1; i < meshesList.Count; i++)
{
bounds = AxisAlignedBoundingBox.Union(bounds, meshesList[i].GetAxisAlignedBoundingBox(meshTransforms[i].TotalTransform));
}
double roundingScale = 20;
RectangleDouble baseRect = new RectangleDouble(bounds.minXYZ.x, bounds.minXYZ.y, bounds.maxXYZ.x, bounds.maxXYZ.y);
baseRect.Inflate(2);
baseRect *= roundingScale;
RoundedRect baseRoundedRect = new RoundedRect(baseRect, 1 * roundingScale);
Mesh baseMeshResult = VertexSourceToMesh.Extrude(baseRoundedRect, unscaledBaseHeight / 2 * roundingScale * sizeScrollBar.Value * heightScrollBar.Value);
baseMeshResult.Transform(Matrix4X4.CreateScale(1 / roundingScale));
meshesList.Add(new MeshGroup(baseMeshResult));
platingDataList.Add(new PlatingMeshGroupData());
meshTransforms.Add(ScaleRotateTranslate.CreateTranslation(0, 0, 0));
PlatingHelper.CreateITraceableForMeshGroup(platingDataList, meshesList, meshesList.Count - 1, null);
}
}
private void SetWordSize(List <MeshGroup> meshesList, List <ScaleRotateTranslate> meshTransforms)
{
if (meshesList.Count > 0)
{
for (int meshIndex = 0; meshIndex < meshesList.Count; meshIndex++)
{
Vector3 startPositionRelCenter = Vector3.Transform(Vector3.Zero, meshTransforms[meshIndex].translation);
// take out the last scale
double oldSize = 1.0 / lastSizeValue;
Vector3 unscaledStartPositionRelCenter = startPositionRelCenter * oldSize;
double newSize = sizeScrollBar.Value;
Vector3 endPositionRelCenter = unscaledStartPositionRelCenter * newSize;
Vector3 deltaPosition = endPositionRelCenter - startPositionRelCenter;
// move the part to keep it in the same relative position
ScaleRotateTranslate scale = meshTransforms[meshIndex];
scale.scale *= Matrix4X4.CreateScale(new Vector3(oldSize, oldSize, oldSize));
scale.scale *= Matrix4X4.CreateScale(new Vector3(newSize, newSize, newSize));
scale.translation *= Matrix4X4.CreateTranslation(deltaPosition);
meshTransforms[meshIndex] = scale;
}
lastSizeValue = sizeScrollBar.Value;
}
CenterTextOnScreen(meshesList, meshTransforms);
}
public static void CenterMeshesXY(List <Mesh> meshesList, List <ScaleRotateTranslate> meshTransforms)
{
bool first = true;
AxisAlignedBoundingBox totalBounds = new AxisAlignedBoundingBox(new Vector3(), new Vector3());
for (int index = 0; index < meshesList.Count; index++)
{
if (first)
{
totalBounds = meshesList[index].GetAxisAlignedBoundingBox(meshTransforms[index].TotalTransform);
first = false;
}
else
{
AxisAlignedBoundingBox bounds = meshesList[index].GetAxisAlignedBoundingBox(meshTransforms[index].TotalTransform);
totalBounds = AxisAlignedBoundingBox.Union(totalBounds, bounds);
}
}
Vector3 boundsCenter = (totalBounds.maxXYZ + totalBounds.minXYZ) / 2;
boundsCenter.z = 0;
for (int index = 0; index < meshesList.Count; index++)
{
ScaleRotateTranslate moved = meshTransforms[index];
moved.translation *= Matrix4X4.CreateTranslation(-boundsCenter);
meshTransforms[index] = moved;
}
}
public override void OnMouseMove(MouseEventArgs mouseEvent)
{
if (meshViewerWidget.TrackballTumbleWidget.TransformState == TrackBallController.MouseDownType.None && meshSelectInfo.downOnPart)
{
Vector2 meshViewerWidgetScreenPosition = meshViewerWidget.TransformFromParentSpace(this, new Vector2(mouseEvent.X, mouseEvent.Y));
Ray ray = meshViewerWidget.TrackballTumbleWidget.GetRayFromScreen(meshViewerWidgetScreenPosition);
IntersectInfo info = meshSelectInfo.hitPlane.GetClosestIntersection(ray);
if (info != null)
{
Vector3 delta = info.hitPosition - meshSelectInfo.planeDownHitPos;
Matrix4X4 totalTransform = Matrix4X4.CreateTranslation(new Vector3(-meshSelectInfo.lastMoveDelta));
totalTransform *= Matrix4X4.CreateTranslation(new Vector3(delta));
meshSelectInfo.lastMoveDelta = delta;
ScaleRotateTranslate translated = SelectedMeshTransform;
translated.translation *= totalTransform;
SelectedMeshTransform = translated;
Invalidate();
}
}
base.OnMouseMove(mouseEvent);
}
private void insertTextBackgroundWorker_DoWork(object sender, DoWorkEventArgs e)
{
Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
BackgroundWorker backgroundWorker = (BackgroundWorker)sender;
asynchMeshGroups.Clear();
asynchMeshGroupTransforms.Clear();
asynchPlatingDatas.Clear();
string currentText = (string)e.Argument;
TypeFacePrinter printer = new TypeFacePrinter(currentText, new StyledTypeFace(boldTypeFace, 12));
Vector2 size = printer.GetSize(currentText);
double centerOffset = -size.x / 2;
double ratioPerMeshGroup = 1.0 / currentText.Length;
double currentRatioDone = 0;
for (int i = 0; i < currentText.Length; i++)
{
int newIndex = asynchMeshGroups.Count;
TypeFacePrinter letterPrinter = new TypeFacePrinter(currentText[i].ToString(), new StyledTypeFace(boldTypeFace, 12));
Mesh textMesh = VertexSourceToMesh.Extrude(letterPrinter, 10 + (i % 2));
if (textMesh.Faces.Count > 0)
{
asynchMeshGroups.Add(new MeshGroup(textMesh));
PlatingMeshGroupData newMeshInfo = new PlatingMeshGroupData();
newMeshInfo.xSpacing = printer.GetOffsetLeftOfCharacterIndex(i).x + centerOffset;
asynchPlatingDatas.Add(newMeshInfo);
asynchMeshGroupTransforms.Add(ScaleRotateTranslate.Identity());
PlatingHelper.CreateITraceableForMeshGroup(asynchPlatingDatas, asynchMeshGroups, newIndex, (double progress0To1, string processingState, out bool continueProcessing) =>
{
continueProcessing = true;
int nextPercent = (int)((currentRatioDone + ratioPerMeshGroup * progress0To1) * 100);
backgroundWorker.ReportProgress(nextPercent);
});
currentRatioDone += ratioPerMeshGroup;
PlatingHelper.PlaceMeshGroupOnBed(asynchMeshGroups, asynchMeshGroupTransforms, newIndex);
}
backgroundWorker.ReportProgress((i + 1) * 95 / currentText.Length);
}
SetWordSpacing(asynchMeshGroups, asynchMeshGroupTransforms, asynchPlatingDatas);
SetWordSize(asynchMeshGroups, asynchMeshGroupTransforms);
SetWordHeight(asynchMeshGroups, asynchMeshGroupTransforms);
if (createUnderline.Checked)
{
CreateUnderline(asynchMeshGroups, asynchMeshGroupTransforms, asynchPlatingDatas);
}
backgroundWorker.ReportProgress(95);
}
private async void AutoArrangePartsInBackground()
{
if (MeshGroups.Count > 0)
{
string progressArrangeParts = LocalizedString.Get("Arranging Parts");
string progressArrangePartsFull = string.Format("{0}:", progressArrangeParts);
processingProgressControl.ProcessType = progressArrangePartsFull;
processingProgressControl.Visible = true;
processingProgressControl.PercentComplete = 0;
LockEditControls();
await Task.Run((System.Action) ArrangeMeshGroups);
if (WidgetHasBeenClosed)
{
return;
}
// offset them to the centor of the bed
for (int i = 0; i < asynchMeshGroups.Count; i++)
{
ScaleRotateTranslate translate = asynchMeshGroupTransforms[i];
translate.translation *= Matrix4X4.CreateTranslation(new Vector3(ActiveSliceSettings.Instance.BedCenter, 0));
asynchMeshGroupTransforms[i] = translate;
}
UnlockEditControls();
PartHasBeenChanged();
PullMeshGroupDataFromAsynchLists();
}
}
public static void MoveMeshGroupToOpenPosition(int meshGroupToMoveIndex, List <PlatingMeshGroupData> perMeshInfo, List <MeshGroup> allMeshGroups, List <ScaleRotateTranslate> meshTransforms)
{
MeshGroup meshGroupToMove = allMeshGroups[meshGroupToMoveIndex];
// find a place to put it that doesn't hit anything
AxisAlignedBoundingBox meshToMoveBounds = meshGroupToMove.GetAxisAlignedBoundingBox(meshTransforms[meshGroupToMoveIndex].TotalTransform);
// add in a few mm so that it will not be touching
meshToMoveBounds.minXYZ -= new Vector3(2, 2, 0);
meshToMoveBounds.maxXYZ += new Vector3(2, 2, 0);
double ringDist = Math.Min(meshToMoveBounds.XSize, meshToMoveBounds.YSize);
double currentDist = 0;
double angle = 0;
double angleIncrement = MathHelper.Tau / 64;
Matrix4X4 transform;
while (true)
{
Matrix4X4 positionTransform = Matrix4X4.CreateTranslation(currentDist, 0, 0);
positionTransform *= Matrix4X4.CreateRotationZ(angle);
Vector3 newPosition = Vector3.Transform(Vector3.Zero, positionTransform);
transform = Matrix4X4.CreateTranslation(newPosition);
AxisAlignedBoundingBox testBounds = meshToMoveBounds.NewTransformed(transform);
bool foundHit = false;
for (int i = 0; i < allMeshGroups.Count; i++)
{
MeshGroup meshToTest = allMeshGroups[i];
if (meshToTest != meshGroupToMove)
{
AxisAlignedBoundingBox existingMeshBounds = meshToTest.GetAxisAlignedBoundingBox(meshTransforms[i].TotalTransform);
AxisAlignedBoundingBox intersection = AxisAlignedBoundingBox.Intersection(testBounds, existingMeshBounds);
if (intersection.XSize > 0 && intersection.YSize > 0)
{
foundHit = true;
break;
}
}
}
if (!foundHit)
{
break;
}
angle += angleIncrement;
if (angle >= MathHelper.Tau)
{
angle = 0;
currentDist += ringDist;
}
}
ScaleRotateTranslate moved = meshTransforms[meshGroupToMoveIndex];
moved.translation *= transform;
meshTransforms[meshGroupToMoveIndex] = moved;
}
public static void PlaceMeshGroupOnBed(List <MeshGroup> meshesGroupList, List <ScaleRotateTranslate> meshTransforms, int index)
{
AxisAlignedBoundingBox bounds = meshesGroupList[index].GetAxisAlignedBoundingBox(meshTransforms[index].TotalTransform);
Vector3 boundsCenter = (bounds.maxXYZ + bounds.minXYZ) / 2;
ScaleRotateTranslate moved = meshTransforms[index];
moved.translation *= Matrix4X4.CreateTranslation(new Vector3(0, 0, -boundsCenter.z + bounds.ZSize / 2));
meshTransforms[index] = moved;
}
public static void CenterMeshGroupXY(List <MeshGroup> meshesGroupList, List <ScaleRotateTranslate> meshTransforms, int index)
{
AxisAlignedBoundingBox bounds = GetAxisAlignedBoundingBox(meshesGroupList[index], meshTransforms[index].TotalTransform);
Vector3 boundsCenter = (bounds.maxXYZ + bounds.minXYZ) / 2;
ScaleRotateTranslate moved = meshTransforms[index];
moved.translation *= Matrix4X4.CreateTranslation(new Vector3(-boundsCenter.x + bounds.XSize / 2, -boundsCenter.y + bounds.YSize / 2, 0));
meshTransforms[index] = moved;
}
private void AddCharacterMeshes(string currentText, TypeFacePrinter printer)
{
int newIndex = asyncMeshGroups.Count;
StyledTypeFace typeFace = printer.TypeFaceStyle;
for (int i = 0; i < currentText.Length; i++)
{
string letter = currentText[i].ToString();
TypeFacePrinter letterPrinter = new TypeFacePrinter(letter, typeFace);
if (CharacterHasMesh(letterPrinter, letter))
{
#if true
Mesh textMesh = VertexSourceToMesh.Extrude(letterPrinter, unscaledLetterHeight / 2);
#else
Mesh textMesh = VertexSourceToMesh.Extrude(letterPrinter, unscaledLetterHeight / 2);
// this is the code to make rounded tops
// convert the letterPrinter to clipper polygons
List <List <IntPoint> > insetPoly = VertexSourceToPolygon.CreatePolygons(letterPrinter);
// inset them
ClipperOffset clipper = new ClipperOffset();
clipper.AddPaths(insetPoly, JoinType.jtMiter, EndType.etClosedPolygon);
List <List <IntPoint> > solution = new List <List <IntPoint> >();
clipper.Execute(solution, 5.0);
// convert them back into a vertex source
// merge both the inset and original vertex sources together
// convert the new vertex source into a mesh (trianglulate them)
// offset the inner loop in z
// create the polygons from the inner loop to a center point so that there is the rest of an approximation of the bubble
// make the mesh for the bottom
// add the top and bottom together
// done
#endif
asyncMeshGroups.Add(new MeshGroup(textMesh));
PlatingMeshGroupData newMeshInfo = new PlatingMeshGroupData();
newMeshInfo.spacing = printer.GetOffsetLeftOfCharacterIndex(i);
asyncPlatingDatas.Add(newMeshInfo);
asyncMeshGroupTransforms.Add(ScaleRotateTranslate.Identity());
PlatingHelper.CreateITraceableForMeshGroup(asyncPlatingDatas, asyncMeshGroups, newIndex, null);
ScaleRotateTranslate moved = asyncMeshGroupTransforms[newIndex];
moved.translation *= Matrix4X4.CreateTranslation(new Vector3(0, 0, unscaledLetterHeight / 2));
asyncMeshGroupTransforms[newIndex] = moved;
newIndex++;
}
processingProgressControl.PercentComplete = ((i + 1) * 95 / currentText.Length);
}
}
private void DoGroup(BackgroundWorker backgroundWorker)
{
if (SelectedMeshGroupIndex == -1)
{
SelectedMeshGroupIndex = 0;
}
MeshGroup meshGroupWeAreKeeping = asynchMeshGroups[SelectedMeshGroupIndex];
for (int meshGroupToMoveIndex = asynchMeshGroups.Count - 1; meshGroupToMoveIndex >= 0; meshGroupToMoveIndex--)
{
MeshGroup meshGroupToMove = asynchMeshGroups[meshGroupToMoveIndex];
if (meshGroupToMove != meshGroupWeAreKeeping)
{
for (int moveIndex = 0; moveIndex < meshGroupToMove.Meshes.Count; moveIndex++)
{
Mesh mesh = meshGroupToMove.Meshes[moveIndex];
meshGroupWeAreKeeping.Meshes.Add(mesh);
}
asynchMeshGroups.RemoveAt(meshGroupToMoveIndex);
asynchMeshGroupTransforms.RemoveAt(meshGroupToMoveIndex);
}
else
{
asynchMeshGroupTransforms[meshGroupToMoveIndex] = ScaleRotateTranslate.Identity();
}
}
asynchPlatingDatas.Clear();
double ratioPerMeshGroup = 1.0 / asynchMeshGroups.Count;
double currentRatioDone = 0;
for (int i = 0; i < asynchMeshGroups.Count; i++)
{
PlatingMeshGroupData newInfo = new PlatingMeshGroupData();
asynchPlatingDatas.Add(newInfo);
MeshGroup meshGroup = asynchMeshGroups[i];
// create the selection info
PlatingHelper.CreateITraceableForMeshGroup(asynchPlatingDatas, asynchMeshGroups, i, (double progress0To1, string processingState, out bool continueProcessing) =>
{
ReportProgressChanged(progress0To1, processingState, out continueProcessing);
});
currentRatioDone += ratioPerMeshGroup;
}
}
void ungroupSelectedBackgroundWorker_DoWork(object sender, DoWorkEventArgs e)
{
string makingCopyLabel = LocalizedString.Get("Ungrouping");
string makingCopyLabelFull = string.Format("{0}:", makingCopyLabel);
processingProgressControl.ProcessType = makingCopyLabelFull;
Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
BackgroundWorker backgroundWorker = (BackgroundWorker)sender;
PushMeshGroupDataToAsynchLists(TraceInfoOpperation.DO_COPY);
int indexBeingReplaced = SelectedMeshGroupIndex;
asynchMeshGroups[indexBeingReplaced].Transform(asynchMeshGroupTransforms[indexBeingReplaced].TotalTransform);
List <Mesh> discreetMeshes = CreateDiscreteMeshes.SplitConnectedIntoMeshes(asynchMeshGroups[indexBeingReplaced], (double progress0To1, string processingState, out bool continueProcessing) =>
{
BackgroundWorker_ProgressChanged(progress0To1 * .5, processingState, out continueProcessing);
});
asynchMeshGroups.RemoveAt(indexBeingReplaced);
asynchPlatingDatas.RemoveAt(indexBeingReplaced);
asynchMeshGroupTransforms.RemoveAt(indexBeingReplaced);
double ratioPerDiscreetMesh = 1.0 / discreetMeshes.Count;
double currentRatioDone = 0;
for (int discreetMeshIndex = 0; discreetMeshIndex < discreetMeshes.Count; discreetMeshIndex++)
{
PlatingMeshGroupData newInfo = new PlatingMeshGroupData();
asynchPlatingDatas.Add(newInfo);
asynchMeshGroups.Add(new MeshGroup(discreetMeshes[discreetMeshIndex]));
int addedMeshIndex = asynchMeshGroups.Count - 1;
MeshGroup addedMeshGroup = asynchMeshGroups[addedMeshIndex];
ScaleRotateTranslate transform = ScaleRotateTranslate.Identity();
transform.SetCenteringForMeshGroup(addedMeshGroup);
asynchMeshGroupTransforms.Add(transform);
//PlatingHelper.PlaceMeshGroupOnBed(asynchMeshGroups, asynchMeshGroupTransforms, addedMeshIndex, false);
// and create selection info
PlatingHelper.CreateITraceableForMeshGroup(asynchPlatingDatas, asynchMeshGroups, addedMeshIndex, (double progress0To1, string processingState, out bool continueProcessing) =>
{
BackgroundWorker_ProgressChanged(progress0To1 * .5 + .5, processingState, out continueProcessing);
});
currentRatioDone += ratioPerDiscreetMesh;
}
}
private void SetWordSpacing(List <MeshGroup> meshesList, List <ScaleRotateTranslate> meshTransforms, List <PlatingMeshGroupData> platingDataList)
{
if (meshesList.Count > 0)
{
for (int meshIndex = 0; meshIndex < meshesList.Count; meshIndex++)
{
Vector3 startPosition = Vector3.Transform(Vector3.Zero, meshTransforms[meshIndex].translation);
ScaleRotateTranslate translation = meshTransforms[meshIndex];
translation.translation *= Matrix4X4.CreateTranslation(-startPosition);
double newX = platingDataList[meshIndex].spacing.x * spacingScrollBar.Value * lastSizeValue;
translation.translation *= Matrix4X4.CreateTranslation(new Vector3(newX, 0, 0) + new Vector3(MeshViewerWidget.BedCenter));
meshTransforms[meshIndex] = translation;
}
}
}
private void SetWordSize(List <MeshGroup> meshesList, List <ScaleRotateTranslate> meshTransforms)
{
if (meshesList.Count > 0)
{
for (int meshIndex = 0; meshIndex < meshesList.Count; meshIndex++)
{
// take out the last scale
double oldSize = 1.0 / lastSizeValue;
ScaleRotateTranslate scale = meshTransforms[meshIndex];
scale.scale *= Matrix4X4.CreateScale(new Vector3(oldSize, oldSize, oldSize));
double newSize = sizeScrollBar.Value;
scale.scale *= Matrix4X4.CreateScale(new Vector3(newSize, newSize, newSize));
meshTransforms[meshIndex] = scale;
}
lastSizeValue = sizeScrollBar.Value;
}
}
private void SetWordHeight(List <MeshGroup> meshesList, List <ScaleRotateTranslate> meshTransforms)
{
if (meshesList.Count > 0)
{
for (int meshIndex = 0; meshIndex < meshesList.Count; meshIndex++)
{
// take out the last scale
double oldHeight = lastHeightValue;
ScaleRotateTranslate scale = meshTransforms[meshIndex];
scale.scale *= Matrix4X4.CreateScale(new Vector3(1, 1, 1 / oldHeight));
double newHeight = heightScrollBar.Value;
scale.scale *= Matrix4X4.CreateScale(new Vector3(1, 1, newHeight));
meshTransforms[meshIndex] = scale;
}
lastHeightValue = heightScrollBar.Value;
}
}
private void CreateUnderline(List <MeshGroup> meshesList, List <ScaleRotateTranslate> meshTransforms, List <PlatingMeshGroupData> platingDataList)
{
if (meshesList.Count > 0)
{
AxisAlignedBoundingBox bounds = meshesList[0].GetAxisAlignedBoundingBox(meshTransforms[0].TotalTransform);
for (int i = 1; i < meshesList.Count; i++)
{
bounds = AxisAlignedBoundingBox.Union(bounds, meshesList[i].GetAxisAlignedBoundingBox(meshTransforms[i].TotalTransform));
}
double xSize = bounds.XSize;
double ySize = sizeScrollBar.Value * 3;
double zSize = bounds.ZSize / 3;
Mesh connectionLine = PlatonicSolids.CreateCube(xSize, ySize, zSize);
meshesList.Add(new MeshGroup(connectionLine));
platingDataList.Add(new PlatingMeshGroupData());
meshTransforms.Add(ScaleRotateTranslate.CreateTranslation((bounds.maxXYZ.x + bounds.minXYZ.x) / 2, bounds.minXYZ.y + ySize / 2 - ySize * 1 / 3, zSize / 2));
PlatingHelper.CreateITraceableForMeshGroup(platingDataList, meshesList, meshesList.Count - 1, null);
}
}
private void CenterTextOnScreen(List <MeshGroup> meshesList, List <ScaleRotateTranslate> meshTransforms)
{
// center in y
if (meshesList.Count > 0)
{
AxisAlignedBoundingBox bounds = meshesList[0].GetAxisAlignedBoundingBox(meshTransforms[0].TotalTransform);
for (int i = 1; i < meshesList.Count; i++)
{
bounds = AxisAlignedBoundingBox.Union(bounds, meshesList[i].GetAxisAlignedBoundingBox(meshTransforms[i].TotalTransform));
}
Vector3 bedCenter = new Vector3(MeshViewerWidget.BedCenter);
Vector3 centerOffset = bounds.Center - bedCenter;
for (int meshIndex = 0; meshIndex < meshesList.Count; meshIndex++)
{
ScaleRotateTranslate centering = meshTransforms[meshIndex];
centering.centering *= Matrix4X4.CreateTranslation(new Vector3(-centerOffset.x, -centerOffset.y, 0));
meshTransforms[meshIndex] = centering;
}
}
}
public static void FindPositionForGroupAndAddToPlate(MeshGroup meshGroupToAdd, ScaleRotateTranslate meshTransform, List <PlatingMeshGroupData> perMeshInfo, List <MeshGroup> meshesGroupsToAvoid, List <ScaleRotateTranslate> meshTransforms)
{
if (meshGroupToAdd == null || meshGroupToAdd.Meshes.Count < 1)
{
return;
}
// first find the bounds of what is already here.
AxisAlignedBoundingBox allPlacedMeshBounds = GetAxisAlignedBoundingBox(meshesGroupsToAvoid[0], meshTransforms[0].TotalTransform);
for (int i = 1; i < meshesGroupsToAvoid.Count; i++)
{
AxisAlignedBoundingBox nextMeshBounds = GetAxisAlignedBoundingBox(meshesGroupsToAvoid[i], meshTransforms[i].TotalTransform);
allPlacedMeshBounds = AxisAlignedBoundingBox.Union(allPlacedMeshBounds, nextMeshBounds);
}
meshesGroupsToAvoid.Add(meshGroupToAdd);
PlatingMeshGroupData newMeshInfo = new PlatingMeshGroupData();
perMeshInfo.Add(newMeshInfo);
meshTransform.SetCenteringForMeshGroup(meshGroupToAdd);
meshTransforms.Add(meshTransform);
int meshGroupIndex = meshesGroupsToAvoid.Count - 1;
// move the part to the total bounds lower left side
MeshGroup meshGroup = meshesGroupsToAvoid[meshGroupIndex];
Vector3 meshLowerLeft = GetAxisAlignedBoundingBox(meshGroup, meshTransforms[meshGroupIndex].TotalTransform).minXYZ;
ScaleRotateTranslate atLowerLeft = meshTransforms[meshGroupIndex];
atLowerLeft.translation *= Matrix4X4.CreateTranslation(-meshLowerLeft + allPlacedMeshBounds.minXYZ);
meshTransforms[meshGroupIndex] = atLowerLeft;
MoveMeshGroupToOpenPosition(meshGroupIndex, perMeshInfo, meshesGroupsToAvoid, meshTransforms);
PlaceMeshGroupOnBed(meshesGroupsToAvoid, meshTransforms, meshGroupIndex);
}
public override void OnMouseMove(MouseEvent3DArgs mouseEvent3D)
{
IntersectInfo info = hitPlane.GetClosestIntersection(mouseEvent3D.MouseRay);
if (info != null && MeshViewerToDrawWith.SelectedMeshGroupIndex != -1)
{
Vector3 delta = new Vector3(0, 0, info.hitPosition.z - zHitHeight);
// move it back to where it started
ScaleRotateTranslate translated = MeshViewerToDrawWith.SelectedMeshGroupTransform;
translated.translation *= Matrix4X4.CreateTranslation(new Vector3(-lastMoveDelta));
MeshViewerToDrawWith.SelectedMeshGroupTransform = translated;
if (MeshViewerToDrawWith.SnapGridDistance > 0)
{
// snap this position to the grid
double snapGridDistance = MeshViewerToDrawWith.SnapGridDistance;
AxisAlignedBoundingBox selectedBounds = MeshViewerToDrawWith.GetBoundsForSelection();
// snap the z position
double bottom = selectedBounds.minXYZ.z + delta.z;
double snappedBottom = ((int)((bottom / snapGridDistance) + .5)) * snapGridDistance;
delta.z = snappedBottom - selectedBounds.minXYZ.z;
}
// and move it from there to where we are now
translated.translation *= Matrix4X4.CreateTranslation(new Vector3(delta));
MeshViewerToDrawWith.SelectedMeshGroupTransform = translated;
lastMoveDelta = delta;
view3DWidget.PartHasBeenChanged();
Invalidate();
}
base.OnMouseMove(mouseEvent3D);
}
private async void AutoArrangePartsInBackground()
{
if (MeshGroups.Count > 0)
{
string progressArrangeParts = LocalizedString.Get("Arranging Parts");
string progressArrangePartsFull = string.Format("{0}:", progressArrangeParts);
processingProgressControl.ProcessType = progressArrangePartsFull;
processingProgressControl.Visible = true;
processingProgressControl.PercentComplete = 0;
LockEditControls();
await Task.Run(() =>
{
Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
PushMeshGroupDataToAsynchLists(TraceInfoOpperation.DONT_COPY);
PlatingHelper.ArrangeMeshGroups(asyncMeshGroups, asyncMeshGroupTransforms, asyncPlatingDatas, ReportProgressChanged);
});
if (WidgetHasBeenClosed)
{
return;
}
// offset them to the centor of the bed
for (int i = 0; i < asyncMeshGroups.Count; i++)
{
ScaleRotateTranslate translate = asyncMeshGroupTransforms[i];
translate.translation *= Matrix4X4.CreateTranslation(new Vector3(ActiveSliceSettings.Instance.BedCenter, 0));
asyncMeshGroupTransforms[i] = translate;
}
UnlockEditControls();
PartHasBeenChanged();
PullMeshGroupDataFromAsynchLists();
}
}
private void arrangeMeshGroupsBackgroundWorker_DoWork(object sender, DoWorkEventArgs e)
{
Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
PushMeshGroupDataToAsynchLists(TraceInfoOpperation.DONT_COPY);
BackgroundWorker backgroundWorker = (BackgroundWorker)sender;
// move them all out of the way
for (int i = 0; i < asynchMeshGroups.Count; i++)
{
ScaleRotateTranslate translate = asynchMeshGroupTransforms[i];
translate.translation *= Matrix4X4.CreateTranslation(10000, 10000, 0);
asynchMeshGroupTransforms[i] = translate;
}
// sort them by size
for (int i = 0; i < asynchMeshGroups.Count; i++)
{
AxisAlignedBoundingBox iAABB = asynchMeshGroups[i].GetAxisAlignedBoundingBox(asynchMeshGroupTransforms[i].TotalTransform);
for (int j = i + 1; j < asynchMeshGroups.Count; j++)
{
AxisAlignedBoundingBox jAABB = asynchMeshGroups[j].GetAxisAlignedBoundingBox(asynchMeshGroupTransforms[j].TotalTransform);
if (Math.Max(iAABB.XSize, iAABB.YSize) < Math.Max(jAABB.XSize, jAABB.YSize))
{
PlatingMeshGroupData tempData = asynchPlatingDatas[i];
asynchPlatingDatas[i] = asynchPlatingDatas[j];
asynchPlatingDatas[j] = tempData;
MeshGroup tempMeshGroup = asynchMeshGroups[i];
asynchMeshGroups[i] = asynchMeshGroups[j];
asynchMeshGroups[j] = tempMeshGroup;
ScaleRotateTranslate iTransform = asynchMeshGroupTransforms[i];
ScaleRotateTranslate jTransform = asynchMeshGroupTransforms[j];
Matrix4X4 tempTransform = iTransform.translation;
iTransform.translation = jTransform.translation;
jTransform.translation = tempTransform;
asynchMeshGroupTransforms[i] = jTransform;
asynchMeshGroupTransforms[j] = iTransform;
iAABB = jAABB;
}
}
}
double ratioPerMeshGroup = 1.0 / asynchMeshGroups.Count;
double currentRatioDone = 0;
// put them onto the plate (try the center) starting with the biggest and moving down
for (int meshGroupIndex = 0; meshGroupIndex < asynchMeshGroups.Count; meshGroupIndex++)
{
bool continueProcessing2 = true;
ReportProgressChanged(currentRatioDone, "Calculating Positions...".Localize(), out continueProcessing2);
MeshGroup meshGroup = asynchMeshGroups[meshGroupIndex];
Vector3 meshLowerLeft = meshGroup.GetAxisAlignedBoundingBox(asynchMeshGroupTransforms[meshGroupIndex].TotalTransform).minXYZ;
ScaleRotateTranslate atZero = asynchMeshGroupTransforms[meshGroupIndex];
atZero.translation *= Matrix4X4.CreateTranslation(-meshLowerLeft);
asynchMeshGroupTransforms[meshGroupIndex] = atZero;
PlatingHelper.MoveMeshGroupToOpenPosition(meshGroupIndex, asynchPlatingDatas, asynchMeshGroups, asynchMeshGroupTransforms);
// and create the trace info so we can select it
if (asynchPlatingDatas[meshGroupIndex].meshTraceableData.Count == 0)
{
PlatingHelper.CreateITraceableForMeshGroup(asynchPlatingDatas, asynchMeshGroups, meshGroupIndex, null);
}
currentRatioDone += ratioPerMeshGroup;
// and put it on the bed
PlatingHelper.PlaceMeshGroupOnBed(asynchMeshGroups, asynchMeshGroupTransforms, meshGroupIndex);
}
// and finally center whatever we have as a group
{
AxisAlignedBoundingBox bounds = asynchMeshGroups[0].GetAxisAlignedBoundingBox(asynchMeshGroupTransforms[0].TotalTransform);
for (int i = 1; i < asynchMeshGroups.Count; i++)
{
bounds = AxisAlignedBoundingBox.Union(bounds, asynchMeshGroups[i].GetAxisAlignedBoundingBox(asynchMeshGroupTransforms[i].TotalTransform));
}
Vector3 boundsCenter = (bounds.maxXYZ + bounds.minXYZ) / 2;
for (int i = 0; i < asynchMeshGroups.Count; i++)
{
ScaleRotateTranslate translate = asynchMeshGroupTransforms[i];
translate.translation *= Matrix4X4.CreateTranslation(-boundsCenter + new Vector3(0, 0, bounds.ZSize / 2));
asynchMeshGroupTransforms[i] = translate;
}
}
}
private void UngroupSelected()
{
if (SelectedMeshGroupIndex == -1)
{
SelectedMeshGroupIndex = 0;
}
string makingCopyLabel = LocalizedString.Get("Ungrouping");
string makingCopyLabelFull = string.Format("{0}:", makingCopyLabel);
processingProgressControl.ProcessType = makingCopyLabelFull;
Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
PushMeshGroupDataToAsynchLists(TraceInfoOpperation.DO_COPY);
int indexBeingReplaced = SelectedMeshGroupIndex;
List <Mesh> discreetMeshes = new List <Mesh>();
asynchMeshGroups[indexBeingReplaced].Transform(asynchMeshGroupTransforms[indexBeingReplaced].TotalTransform);
// if there are multiple meshes than just make them separate groups
if (asynchMeshGroups[indexBeingReplaced].Meshes.Count > 1)
{
foreach (Mesh mesh in asynchMeshGroups[indexBeingReplaced].Meshes)
{
discreetMeshes.Add(mesh);
}
}
else // actually try and cut up the mesh into separate parts
{
discreetMeshes = CreateDiscreteMeshes.SplitConnectedIntoMeshes(asynchMeshGroups[indexBeingReplaced], (double progress0To1, string processingState, out bool continueProcessing) =>
{
ReportProgressChanged(progress0To1 * .5, processingState, out continueProcessing);
});
}
asynchMeshGroups.RemoveAt(indexBeingReplaced);
asynchPlatingDatas.RemoveAt(indexBeingReplaced);
asynchMeshGroupTransforms.RemoveAt(indexBeingReplaced);
double ratioPerDiscreetMesh = 1.0 / discreetMeshes.Count;
double currentRatioDone = 0;
for (int discreetMeshIndex = 0; discreetMeshIndex < discreetMeshes.Count; discreetMeshIndex++)
{
PlatingMeshGroupData newInfo = new PlatingMeshGroupData();
asynchPlatingDatas.Add(newInfo);
asynchMeshGroups.Add(new MeshGroup(discreetMeshes[discreetMeshIndex]));
int addedMeshIndex = asynchMeshGroups.Count - 1;
MeshGroup addedMeshGroup = asynchMeshGroups[addedMeshIndex];
ScaleRotateTranslate transform = ScaleRotateTranslate.Identity();
transform.SetCenteringForMeshGroup(addedMeshGroup);
asynchMeshGroupTransforms.Add(transform);
//PlatingHelper.PlaceMeshGroupOnBed(asynchMeshGroups, asynchMeshGroupTransforms, addedMeshIndex, false);
// and create selection info
PlatingHelper.CreateITraceableForMeshGroup(asynchPlatingDatas, asynchMeshGroups, addedMeshIndex, (double progress0To1, string processingState, out bool continueProcessing) =>
{
ReportProgressChanged(.5 + progress0To1 * .5 * currentRatioDone, processingState, out continueProcessing);
});
currentRatioDone += ratioPerDiscreetMesh;
}
}
public static void FindPositionForGroupAndAddToPlate(MeshGroup meshGroupToAdd, ScaleRotateTranslate meshTransform, List <PlatingMeshGroupData> perMeshInfo, List <MeshGroup> meshesGroupsToAvoid, List <ScaleRotateTranslate> meshTransforms)
{
if (meshGroupToAdd == null || meshGroupToAdd.Meshes.Count < 1)
{
return;
}
meshesGroupsToAvoid.Add(meshGroupToAdd);
PlatingMeshGroupData newMeshInfo = new PlatingMeshGroupData();
perMeshInfo.Add(newMeshInfo);
meshTransform.SetCenteringForMeshGroup(meshGroupToAdd);
meshTransforms.Add(meshTransform);
int meshGroupIndex = meshesGroupsToAvoid.Count - 1;
// now actually center the part we are going to finde a position for
CenterMeshGroupXY(meshesGroupsToAvoid, meshTransforms, meshGroupIndex);
MoveMeshGroupToOpenPosition(meshGroupIndex, perMeshInfo, meshesGroupsToAvoid, meshTransforms);
PlaceMeshGroupOnBed(meshesGroupsToAvoid, meshTransforms, meshGroupIndex);
}
public static void ArrangeMeshGroups(List <MeshGroup> asyncMeshGroups, List <ScaleRotateTranslate> asyncMeshGroupTransforms, List <PlatingMeshGroupData> asyncPlatingDatas,
Action <double, string> reportProgressChanged)
{
// move them all out of the way
for (int i = 0; i < asyncMeshGroups.Count; i++)
{
ScaleRotateTranslate translate = asyncMeshGroupTransforms[i];
translate.translation *= Matrix4X4.CreateTranslation(10000, 10000, 0);
asyncMeshGroupTransforms[i] = translate;
}
// sort them by size
for (int i = 0; i < asyncMeshGroups.Count; i++)
{
AxisAlignedBoundingBox iAABB = asyncMeshGroups[i].GetAxisAlignedBoundingBox(asyncMeshGroupTransforms[i].TotalTransform);
for (int j = i + 1; j < asyncMeshGroups.Count; j++)
{
AxisAlignedBoundingBox jAABB = asyncMeshGroups[j].GetAxisAlignedBoundingBox(asyncMeshGroupTransforms[j].TotalTransform);
if (Math.Max(iAABB.XSize, iAABB.YSize) < Math.Max(jAABB.XSize, jAABB.YSize))
{
PlatingMeshGroupData tempData = asyncPlatingDatas[i];
asyncPlatingDatas[i] = asyncPlatingDatas[j];
asyncPlatingDatas[j] = tempData;
MeshGroup tempMeshGroup = asyncMeshGroups[i];
asyncMeshGroups[i] = asyncMeshGroups[j];
asyncMeshGroups[j] = tempMeshGroup;
ScaleRotateTranslate iTransform = asyncMeshGroupTransforms[i];
ScaleRotateTranslate jTransform = asyncMeshGroupTransforms[j];
Matrix4X4 tempTransform = iTransform.translation;
iTransform.translation = jTransform.translation;
jTransform.translation = tempTransform;
asyncMeshGroupTransforms[i] = jTransform;
asyncMeshGroupTransforms[j] = iTransform;
iAABB = jAABB;
}
}
}
double ratioPerMeshGroup = 1.0 / asyncMeshGroups.Count;
double currentRatioDone = 0;
// put them onto the plate (try the center) starting with the biggest and moving down
for (int meshGroupIndex = 0; meshGroupIndex < asyncMeshGroups.Count; meshGroupIndex++)
{
reportProgressChanged(currentRatioDone, "Calculating Positions...".Localize());
MeshGroup meshGroup = asyncMeshGroups[meshGroupIndex];
Vector3 meshLowerLeft = meshGroup.GetAxisAlignedBoundingBox(asyncMeshGroupTransforms[meshGroupIndex].TotalTransform).minXYZ;
ScaleRotateTranslate atZero = asyncMeshGroupTransforms[meshGroupIndex];
atZero.translation *= Matrix4X4.CreateTranslation(-meshLowerLeft);
asyncMeshGroupTransforms[meshGroupIndex] = atZero;
PlatingHelper.MoveMeshGroupToOpenPosition(meshGroupIndex, asyncPlatingDatas, asyncMeshGroups, asyncMeshGroupTransforms);
// and create the trace info so we can select it
if (asyncPlatingDatas[meshGroupIndex].meshTraceableData.Count == 0)
{
PlatingHelper.CreateITraceableForMeshGroup(asyncPlatingDatas, asyncMeshGroups, meshGroupIndex, null);
}
currentRatioDone += ratioPerMeshGroup;
// and put it on the bed
PlatingHelper.PlaceMeshGroupOnBed(asyncMeshGroups, asyncMeshGroupTransforms, meshGroupIndex);
}
// and finally center whatever we have as a group
{
AxisAlignedBoundingBox bounds = asyncMeshGroups[0].GetAxisAlignedBoundingBox(asyncMeshGroupTransforms[0].TotalTransform);
for (int i = 1; i < asyncMeshGroups.Count; i++)
{
bounds = AxisAlignedBoundingBox.Union(bounds, asyncMeshGroups[i].GetAxisAlignedBoundingBox(asyncMeshGroupTransforms[i].TotalTransform));
}
Vector3 boundsCenter = (bounds.maxXYZ + bounds.minXYZ) / 2;
for (int i = 0; i < asyncMeshGroups.Count; i++)
{
ScaleRotateTranslate translate = asyncMeshGroupTransforms[i];
translate.translation *= Matrix4X4.CreateTranslation(-boundsCenter + new Vector3(0, 0, bounds.ZSize / 2));
asyncMeshGroupTransforms[i] = translate;
}
}
}
public View3DTextCreator(Vector3 viewerVolume, Vector2 bedCenter, MeshViewerWidget.BedShape bedShape)
{
boldTypeFace = TypeFace.LoadFrom(StaticData.Instance.ReadAllText(Path.Combine("Fonts", "LiberationSans-Bold.svg")));
MeshGroupExtraData = new List <PlatingMeshGroupData>();
FlowLayoutWidget mainContainerTopToBottom = new FlowLayoutWidget(FlowDirection.TopToBottom);
mainContainerTopToBottom.HAnchor = Agg.UI.HAnchor.Max_FitToChildren_ParentWidth;
mainContainerTopToBottom.VAnchor = Agg.UI.VAnchor.Max_FitToChildren_ParentHeight;
FlowLayoutWidget centerPartPreviewAndControls = new FlowLayoutWidget(FlowDirection.LeftToRight);
centerPartPreviewAndControls.AnchorAll();
GuiWidget viewArea = new GuiWidget();
viewArea.AnchorAll();
{
meshViewerWidget = new MeshViewerWidget(viewerVolume, bedCenter, bedShape);
meshViewerWidget.AllowBedRenderingWhenEmpty = true;
meshViewerWidget.AnchorAll();
}
viewArea.AddChild(meshViewerWidget);
centerPartPreviewAndControls.AddChild(viewArea);
mainContainerTopToBottom.AddChild(centerPartPreviewAndControls);
FlowLayoutWidget buttonBottomPanel = new FlowLayoutWidget(FlowDirection.LeftToRight);
buttonBottomPanel.HAnchor = HAnchor.ParentLeftRight;
buttonBottomPanel.Padding = new BorderDouble(3, 3);
buttonBottomPanel.BackgroundColor = ActiveTheme.Instance.PrimaryBackgroundColor;
buttonRightPanel = CreateRightButtonPanel(viewerVolume.y);
// add in the plater tools
{
FlowLayoutWidget editToolBar = new FlowLayoutWidget();
processingProgressControl = new ProgressControl("Finding Parts:".Localize(), ActiveTheme.Instance.PrimaryTextColor, ActiveTheme.Instance.PrimaryAccentColor);
processingProgressControl.VAnchor = Agg.UI.VAnchor.ParentCenter;
editToolBar.AddChild(processingProgressControl);
editToolBar.VAnchor |= Agg.UI.VAnchor.ParentCenter;
editPlateButtonsContainer = new FlowLayoutWidget();
textToAddWidget = new MHTextEditWidget("", pixelWidth: 300, messageWhenEmptyAndNotSelected: "Enter Text Here".Localize());
textToAddWidget.VAnchor = VAnchor.ParentCenter;
textToAddWidget.Margin = new BorderDouble(5);
editPlateButtonsContainer.AddChild(textToAddWidget);
textToAddWidget.ActualTextEditWidget.EnterPressed += (object sender, KeyEventArgs keyEvent) =>
{
InsertTextNow(textToAddWidget.Text);
};
Button insertTextButton = textImageButtonFactory.Generate("Insert".Localize());
editPlateButtonsContainer.AddChild(insertTextButton);
insertTextButton.Click += (sender, e) =>
{
InsertTextNow(textToAddWidget.Text);
};
KeyDown += (sender, e) =>
{
KeyEventArgs keyEvent = e as KeyEventArgs;
if (keyEvent != null && !keyEvent.Handled)
{
if (keyEvent.KeyCode == Keys.Escape)
{
if (meshSelectInfo.downOnPart)
{
meshSelectInfo.downOnPart = false;
ScaleRotateTranslate translated = SelectedMeshTransform;
translated.translation *= transformOnMouseDown;
SelectedMeshTransform = translated;
Invalidate();
}
}
}
};
editToolBar.AddChild(editPlateButtonsContainer);
buttonBottomPanel.AddChild(editToolBar);
}
GuiWidget buttonRightPanelHolder = new GuiWidget(HAnchor.FitToChildren, VAnchor.ParentBottomTop);
centerPartPreviewAndControls.AddChild(buttonRightPanelHolder);
buttonRightPanelHolder.AddChild(buttonRightPanel);
viewControls3D = new ViewControls3D(meshViewerWidget);
viewControls3D.ResetView += (sender, e) =>
{
SetDefaultView();
};
buttonRightPanelDisabledCover = new Cover(HAnchor.ParentLeftRight, VAnchor.ParentBottomTop);
buttonRightPanelDisabledCover.BackgroundColor = new RGBA_Bytes(ActiveTheme.Instance.PrimaryBackgroundColor, 150);
buttonRightPanelHolder.AddChild(buttonRightPanelDisabledCover);
LockEditControls();
GuiWidget leftRightSpacer = new GuiWidget();
leftRightSpacer.HAnchor = HAnchor.ParentLeftRight;
buttonBottomPanel.AddChild(leftRightSpacer);
closeButton = textImageButtonFactory.Generate("Close".Localize());
buttonBottomPanel.AddChild(closeButton);
mainContainerTopToBottom.AddChild(buttonBottomPanel);
this.AddChild(mainContainerTopToBottom);
this.AnchorAll();
meshViewerWidget.TrackballTumbleWidget.TransformState = TrackBallController.MouseDownType.Rotation;
AddChild(viewControls3D);
SetDefaultView();
AddHandlers();
UnlockEditControls();
// but make sure we can't use the right panel yet
buttonRightPanelDisabledCover.Visible = true;
}
private void AlignSelected()
{
if (SelectedMeshGroupIndex == -1)
{
SelectedMeshGroupIndex = 0;
}
// make sure our thread traslates numbmers correctly (always do this in a thread)
Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
// save our data so we don't mess up the display while doing work
PushMeshGroupDataToAsynchLists(TraceInfoOpperation.DO_COPY);
// try to move all the not selected meshes relative to the selected mesh
AxisAlignedBoundingBox selectedOriginalBounds = asyncMeshGroups[SelectedMeshGroupIndex].GetAxisAlignedBoundingBox();
Vector3 selectedOriginalCenter = selectedOriginalBounds.Center;
AxisAlignedBoundingBox selectedCurrentBounds = asyncMeshGroups[SelectedMeshGroupIndex].GetAxisAlignedBoundingBox(asyncMeshGroupTransforms[SelectedMeshGroupIndex].TotalTransform);
Vector3 selctedCurrentCenter = selectedCurrentBounds.Center;
for (int meshGroupToMoveIndex = 0; meshGroupToMoveIndex < asyncMeshGroups.Count; meshGroupToMoveIndex++)
{
MeshGroup meshGroupToMove = asyncMeshGroups[meshGroupToMoveIndex];
if (meshGroupToMove != asyncMeshGroups[SelectedMeshGroupIndex])
{
AxisAlignedBoundingBox groupToMoveOriginalBounds = meshGroupToMove.GetAxisAlignedBoundingBox();
Vector3 groupToMoveOriginalCenter = groupToMoveOriginalBounds.Center;
AxisAlignedBoundingBox groupToMoveBounds = meshGroupToMove.GetAxisAlignedBoundingBox(asyncMeshGroupTransforms[meshGroupToMoveIndex].TotalTransform);
Vector3 groupToMoveCenter = groupToMoveBounds.Center;
Vector3 originalCoordinatesDelta = groupToMoveOriginalCenter - selectedOriginalCenter;
Vector3 currentCoordinatesDelta = groupToMoveCenter - selctedCurrentCenter;
Vector3 deltaRequired = originalCoordinatesDelta - currentCoordinatesDelta;
if (deltaRequired.Length > .0001)
{
ScaleRotateTranslate translated = asyncMeshGroupTransforms[meshGroupToMoveIndex];
translated.translation *= Matrix4X4.CreateTranslation(deltaRequired);
asyncMeshGroupTransforms[meshGroupToMoveIndex] = translated;
PartHasBeenChanged();
}
}
}
// now put all the meshes into just one group
MeshGroup meshGroupWeAreKeeping = asyncMeshGroups[SelectedMeshGroupIndex];
for (int meshGroupToMoveIndex = asyncMeshGroups.Count - 1; meshGroupToMoveIndex >= 0; meshGroupToMoveIndex--)
{
MeshGroup meshGroupToMove = asyncMeshGroups[meshGroupToMoveIndex];
if (meshGroupToMove != meshGroupWeAreKeeping)
{
// move all the meshes into the new aligned mesh group
for (int moveIndex = 0; moveIndex < meshGroupToMove.Meshes.Count; moveIndex++)
{
Mesh mesh = meshGroupToMove.Meshes[moveIndex];
meshGroupWeAreKeeping.Meshes.Add(mesh);
}
asyncMeshGroups.RemoveAt(meshGroupToMoveIndex);
asyncMeshGroupTransforms.RemoveAt(meshGroupToMoveIndex);
}
}
asyncPlatingDatas.Clear();
double ratioPerMeshGroup = 1.0 / asyncMeshGroups.Count;
double currentRatioDone = 0;
for (int i = 0; i < asyncMeshGroups.Count; i++)
{
PlatingMeshGroupData newInfo = new PlatingMeshGroupData();
asyncPlatingDatas.Add(newInfo);
MeshGroup meshGroup = asyncMeshGroups[i];
// create the selection info
PlatingHelper.CreateITraceableForMeshGroup(asyncPlatingDatas, asyncMeshGroups, i, (double progress0To1, string processingState, out bool continueProcessing) =>
{
ReportProgressChanged(progress0To1, processingState, out continueProcessing);
});
currentRatioDone += ratioPerMeshGroup;
}
}
public static void MoveMeshGroupToOpenPosition(int meshGroupToMoveIndex, List <PlatingMeshGroupData> perMeshInfo, List <MeshGroup> allMeshGroups, List <ScaleRotateTranslate> meshTransforms)
{
AxisAlignedBoundingBox allPlacedMeshBounds = GetAxisAlignedBoundingBox(allMeshGroups[0], meshTransforms[0].TotalTransform);
for (int i = 1; i < meshGroupToMoveIndex; i++)
{
AxisAlignedBoundingBox nextMeshBounds = GetAxisAlignedBoundingBox(allMeshGroups[i], meshTransforms[i].TotalTransform);
allPlacedMeshBounds = AxisAlignedBoundingBox.Union(allPlacedMeshBounds, nextMeshBounds);
}
double xStart = allPlacedMeshBounds.minXYZ.x;
double yStart = allPlacedMeshBounds.minXYZ.y;
MeshGroup meshGroupToMove = allMeshGroups[meshGroupToMoveIndex];
// find a place to put it that doesn't hit anything
AxisAlignedBoundingBox meshToMoveBounds = GetAxisAlignedBoundingBox(meshGroupToMove, meshTransforms[meshGroupToMoveIndex].TotalTransform);
// add in a few mm so that it will not be touching
meshToMoveBounds.minXYZ -= new Vector3(2, 2, 0);
meshToMoveBounds.maxXYZ += new Vector3(2, 2, 0);
Matrix4X4 transform = Matrix4X4.Identity;
int currentSize = 1;
bool partPlaced = false;
while (!partPlaced && meshGroupToMoveIndex > 0)
{
int yStep = 0;
int xStep = currentSize;
// check far right edge
for (yStep = 0; yStep < currentSize; yStep++)
{
partPlaced = CheckPosition(meshGroupToMoveIndex, allMeshGroups, meshTransforms, meshGroupToMove, meshToMoveBounds, yStep, xStep, ref transform);
if (partPlaced)
{
break;
}
}
if (!partPlaced)
{
yStep = currentSize;
// check top edeg
for (xStep = 0; xStep < currentSize; xStep++)
{
partPlaced = CheckPosition(meshGroupToMoveIndex, allMeshGroups, meshTransforms, meshGroupToMove, meshToMoveBounds, yStep, xStep, ref transform);
if (partPlaced)
{
break;
}
}
if (!partPlaced)
{
xStep = currentSize;
// check top right point
partPlaced = CheckPosition(meshGroupToMoveIndex, allMeshGroups, meshTransforms, meshGroupToMove, meshToMoveBounds, yStep, xStep, ref transform);
}
}
currentSize++;
}
ScaleRotateTranslate moved = meshTransforms[meshGroupToMoveIndex];
moved.translation *= transform;
meshTransforms[meshGroupToMoveIndex] = moved;
}
private void GroupSelected()
{
string makingCopyLabel = LocalizedString.Get("Grouping");
string makingCopyLabelFull = string.Format("{0}:", makingCopyLabel);
processingProgressControl.ProcessType = makingCopyLabelFull;
Thread.CurrentThread.CurrentCulture = CultureInfo.InvariantCulture;
PushMeshGroupDataToAsynchLists(TraceInfoOpperation.DO_COPY);
for (int i = 0; i < asyncMeshGroups.Count; i++)
{
asyncMeshGroups[i].Transform(asyncMeshGroupTransforms[i].TotalTransform);
bool continueProcessing;
ReportProgressChanged((i + 1) * .4 / asyncMeshGroups.Count, "", out continueProcessing);
}
if (SelectedMeshGroupIndex == -1)
{
SelectedMeshGroupIndex = 0;
}
MeshGroup meshGroupWeAreKeeping = asyncMeshGroups[SelectedMeshGroupIndex];
for (int meshGroupToMoveIndex = asyncMeshGroups.Count - 1; meshGroupToMoveIndex >= 0; meshGroupToMoveIndex--)
{
MeshGroup meshGroupToMove = asyncMeshGroups[meshGroupToMoveIndex];
if (meshGroupToMove != meshGroupWeAreKeeping)
{
for (int moveIndex = 0; moveIndex < meshGroupToMove.Meshes.Count; moveIndex++)
{
Mesh mesh = meshGroupToMove.Meshes[moveIndex];
meshGroupWeAreKeeping.Meshes.Add(mesh);
}
asyncMeshGroups.RemoveAt(meshGroupToMoveIndex);
asyncMeshGroupTransforms.RemoveAt(meshGroupToMoveIndex);
}
else
{
asyncMeshGroupTransforms[meshGroupToMoveIndex] = ScaleRotateTranslate.Identity();
}
}
asyncPlatingDatas.Clear();
double ratioPerMeshGroup = 1.0 / asyncMeshGroups.Count;
double currentRatioDone = 0;
for (int i = 0; i < asyncMeshGroups.Count; i++)
{
PlatingMeshGroupData newInfo = new PlatingMeshGroupData();
asyncPlatingDatas.Add(newInfo);
MeshGroup meshGroup = asyncMeshGroups[i];
// create the selection info
PlatingHelper.CreateITraceableForMeshGroup(asyncPlatingDatas, asyncMeshGroups, i, (double progress0To1, string processingState, out bool continueProcessing) =>
{
ReportProgressChanged(progress0To1, processingState, out continueProcessing);
});
currentRatioDone += ratioPerMeshGroup;
}
}
