//////////////////////
public void Init()
{
Material floorMat = new Material(Shader.FromFile("floor_shader.hlsl"));
floorMat.Transparency = Transparency.Blend;
floorMat.SetVector("radius", new Vec4(5, 10, 0, 0));
floorMat.QueueOffset = -11;
floorMesh = Model.FromMesh(Mesh.GeneratePlane(new Vec2(40, 40), Vec3.Up, Vec3.Forward), floorMat);
floorTr = Matrix.TR(new Vec3(0, -1.5f, 0), Quat.Identity);
demoSelectPose.position = new Vec3(0, 0, -0.6f);
demoSelectPose.orientation = Quat.LookDir(-Vec3.Forward);
Tests.FindTests();
Tests.SetTestActive(startTest);
Tests.Initialize();
for (int i = 0; i < Tests.DemoCount; i++)
{
demoNames.Add(Tests.GetDemoName(i).Substring("Demo".Length));
}
if (!Tests.IsTesting)
{
SK.AddStepper(new RenderCamera(new Pose(0.3f, 0, .5f, Quat.FromAngles(0, -90, 0)), 1000, 1000));
}
}
void DrawMenu()
{
UI.AffordanceBegin("PaletteMenu", ref palettePose, paletteModel.Bounds);
paletteModel.Draw(Matrix.Identity);
Pose p = new Pose(Vec3.Zero, Quat.FromAngles(90, 0, 0));
UI.AffordanceBegin("LineSlider", ref p, new Bounds());
UI.HSliderAt("Size", ref lineSize, 0.001f, 0.02f, 0, new Vec3(6, -1, 0) * Units.cm2m, new Vec2(8, 2) * Units.cm2m);
Lines.Add(new Vec3(6, 1, -1) * Units.cm2m, new Vec3(-2, 1, -1) * Units.cm2m, activeColor, lineSize);
UI.AffordanceEnd();
if (UI.VolumeAt("White", new Bounds(new Vec3(4, 0, 7) * Units.cm2m, new Vec3(4, 2, 4) * Units.cm2m)))
{
SetColor(Color.White);
}
if (UI.VolumeAt("Red", new Bounds(new Vec3(9, 0, 3) * Units.cm2m, new Vec3(4, 2, 4) * Units.cm2m)))
{
SetColor(new Color(1, 0, 0));
}
if (UI.VolumeAt("Green", new Bounds(new Vec3(9, 0, -3) * Units.cm2m, new Vec3(4, 2, 4) * Units.cm2m)))
{
SetColor(new Color(0, 1, 0));
}
if (UI.VolumeAt("Blue", new Bounds(new Vec3(3, 0, -6) * Units.cm2m, new Vec3(4, 2, 4) * Units.cm2m)))
{
SetColor(new Color(0, 0, 1));
}
UI.AffordanceEnd();
}
/// Once you have that information, it's simply a matter of placing a
/// window off to the side of the hand! The palm pose Right direction
/// points to different sides of each hand, so a different X offset
/// is required for each hand.
public static void DrawHandMenu(Handed handed)
{
if (!HandFacingHead(handed))
{
return;
}
// Decide the size and offset of the menu
Vec2 size = new Vec2(4, 16);
float offset = handed == Handed.Left ? -2 - size.x : 2 + size.x;
// Position the menu relative to the side of the hand
Hand hand = Input.Hand(handed);
Vec3 at = hand[FingerId.Little, JointId.KnuckleMajor].position;
Vec3 down = hand[FingerId.Little, JointId.Root].position;
Vec3 across = hand[FingerId.Index, JointId.KnuckleMajor].position;
Pose menuPose = new Pose(
at,
Quat.LookAt(at, across, at - down) * Quat.FromAngles(0, handed == Handed.Left ? 90 : -90, 0));
menuPose.position += menuPose.Right * offset * U.cm;
menuPose.position += menuPose.Up * (size.y / 2) * U.cm;
// And make a menu!
UI.WindowBegin("HandMenu", ref menuPose, size * U.cm, UIWin.Empty);
UI.Button("Test");
UI.Button("That");
UI.Button("Hand");
UI.WindowEnd();
}
public void Render()
{
if (!this.IsVisible)
{
return;
}
var material = this.GetMaterialGroup(-1).GetMaterial();
if (material != null)
{
this.Node?.Draw(
SK.Matrix.TRS(this.WorldPosition.ToSKVec3(),
Quat.FromAngles(
this.WorldRotation.X,
this.WorldRotation.Y,
this.WorldRotation.Z),
this.WorldSize.ToSKVec3()),
material.Diffuse.ToSKColor(material.Opacity));
}
else
{
this.Node?.Draw(
SK.Matrix.TRS(this.WorldPosition.ToSKVec3(),
Quat.FromAngles(
this.WorldRotation.X,
this.WorldRotation.Y,
this.WorldRotation.Z),
this.WorldSize.ToSKVec3()));
}
}
public static SK.Quat ToSKQuat(this Imml.Numerics.Vector3 vector3)
{
//StereoKit is using a coordinate system where:
// X increases to the right
// Y increases up
// Z increases towards the viewer
return(Quat.FromAngles(
vector3.X,
vector3.Y,
vector3.Z));
}
/// Now all we need to do is show the QR codes! In this case,
/// we're just displaying an axis widget, and the contents of
/// the QR code as text.
///
/// With the text, all we're doing is squeezing the text into
/// the bounds of the QR code, and shifting it to be a little
/// forward, in front of the code!
public void Update()
{
foreach (QRData d in poses.Values)
{
Lines.AddAxis(d.pose, d.size);
Text.Add(
d.text,
Matrix.TRS(
d.pose.position + d.pose.Forward * d.size * 0.1f,
Quat.FromAngles(0, 0, 180) * d.pose.orientation),
Vec2.One * d.size,
TextFit.Squeeze,
TextAlign.XLeft | TextAlign.YTop);
}
}
bool TestMatrixDecompose()
{
Vec3 translate = new Vec3(1, 2, 3);
Quat rotate = Quat.FromAngles(0, 90, 0);
Vec3 scale = new Vec3(1, 2, 1);
Matrix mat = Matrix.TRS(translate, rotate, scale);
Vec3 exTranslate = mat.Translation;
Quat exRotate = mat.Rotation;
Vec3 exScale = mat.Scale;
Log.Info($"Transform matrix: {translate } {rotate } {scale }");
Log.Info($"Matrix sep decompose: {exTranslate} {exRotate} {exScale}");
if (Vec3.Distance(exTranslate, translate) > tolerance)
{
return(false);
}
if (Vec3.Distance(exScale, scale) > tolerance)
{
return(false);
}
if (!mat.Decompose(out exTranslate, out exRotate, out exScale))
{
return(false);
}
Log.Info($"Matrix decompose: {exTranslate} {exRotate} {exScale}");
if (Vec3.Distance(exTranslate, translate) > tolerance)
{
return(false);
}
if (Vec3.Distance(exScale, scale) > tolerance)
{
return(false);
}
return(true);
}
public void Update()
{
Tests.Screenshot(1024, 1024, "PBRBalls.jpg", new Vec3(0, 0, -0.1f), new Vec3(0, 0, -1));
Hierarchy.Push(Matrix.T(0, 0, -1));
if (!Tests.IsTesting)
{
UI.HandleBegin("Model", ref modelPose, pbrModel.Bounds * .2f);
pbrModel.Draw(Matrix.TRS(Vec3.Zero, Quat.FromAngles(0, 180, 0), 0.2f));
UI.HandleEnd();
}
for (int y = 0; y < materialGrid; y++)
{
for (int x = 0; x < materialGrid; x++)
{
Renderer.Add(sphereMesh, pbrMaterials[x + y * materialGrid], Matrix.TS(new Vec3(x - materialGrid / 2.0f + 0.5f, y - materialGrid / 2.0f + 0.5f, -1) / 4.0f, 0.2f));
}
}
Text.Add("Metallic -->", Matrix.TRS(new Vec3(0, materialGrid / 8.0f + 0.2f, -0.25f), Quat.FromAngles(0, 180, 0), 4));
Text.Add("Roughness -->", Matrix.TRS(new Vec3(materialGrid / -8.0f - 0.2f, 0, -0.25f), Quat.FromAngles(0, 180, -90), 4));
Hierarchy.Pop();
}
/// :End:
public static void DrawHandSize()
{
for (int h = 0; h < (int)Handed.Max; h++)
{
Hand hand = Input.Hand((Handed)h);
if (!hand.IsTracked)
{
continue;
}
HandJoint at = hand[FingerId.Middle, JointId.Tip];
Vec3 pos = at.position + at.Pose.Forward * at.radius;
Quat rot = at.orientation * Quat.FromAngles(-90, 0, 0);
if (!HandFacingHead((Handed)h))
{
rot = rot * Quat.FromAngles(0, 180, 0);
}
Text.Add(
(hand.size * 100).ToString(".0") + "cm",
Matrix.TRS(pos, rot, 0.3f),
TextAlign.XCenter | TextAlign.YBottom);
}
}
/// :CodeSample: Controller Input.Controller TrackState Input.ControllerMenuButton Controller.IsTracked Controller.trackedPos Controller.trackedRot Controller.IsX1Pressed Controller.IsX2Pressed Controller.IsStickClicked Controller.stick Controller.aim Controller.grip Controller.trigger Controller.pose
/// ### Controller Debug Visualizer
/// This function shows a debug visualization of the current state of
/// the controller! It's not something you'd show to users, but it's
/// nice for just seeing how the API works, or as a temporary
/// visualization.
void ShowController(Handed hand)
{
Controller c = Input.Controller(hand);
if (!c.IsTracked)
{
return;
}
Hierarchy.Push(c.pose.ToMatrix());
// Pick the controller color based on trackin info state
Color color = Color.Black;
if (c.trackedPos == TrackState.Inferred)
{
color.g = 0.5f;
}
if (c.trackedPos == TrackState.Known)
{
color.g = 1;
}
if (c.trackedRot == TrackState.Inferred)
{
color.b = 0.5f;
}
if (c.trackedRot == TrackState.Known)
{
color.b = 1;
}
Default.MeshCube.Draw(Default.Material, Matrix.S(new Vec3(3, 3, 8) * U.cm), color);
// Show button info on the back of the controller
Hierarchy.Push(Matrix.TR(0, 1.6f * U.cm, 0, Quat.LookAt(Vec3.Zero, new Vec3(0, 1, 0), new Vec3(0, 0, -1))));
// Show the tracking states as text
Text.Add(c.trackedPos == TrackState.Known?"(pos)":(c.trackedPos == TrackState.Inferred?"~pos~":"pos"), Matrix.TS(0, -0.03f, 0, 0.25f));
Text.Add(c.trackedRot == TrackState.Known?"(rot)":(c.trackedRot == TrackState.Inferred?"~rot~":"rot"), Matrix.TS(0, -0.02f, 0, 0.25f));
// Show the controller's buttons
Text.Add(Input.ControllerMenuButton.IsActive()?"(menu)":"menu", Matrix.TS(0, -0.01f, 0, 0.25f));
Text.Add(c.IsX1Pressed?"(X1)":"X1", Matrix.TS(0, 0.00f, 0, 0.25f));
Text.Add(c.IsX2Pressed?"(X2)":"X2", Matrix.TS(0, 0.01f, 0, 0.25f));
// Show the analog stick's information
Vec3 stickAt = new Vec3(0, 0.03f, 0);
Lines.Add(stickAt, stickAt + c.stick.XY0 * 0.01f, Color.White, 0.001f);
if (c.IsStickClicked)
{
Text.Add("O", Matrix.TS(stickAt, 0.25f));
}
// And show the trigger and grip buttons
Default.MeshCube.Draw(Default.Material, Matrix.TS(0, -0.015f, -0.005f, new Vec3(0.01f, 0.04f, 0.01f)) * Matrix.TR(new Vec3(0, 0.02f, 0.03f), Quat.FromAngles(-45 + c.trigger * 40, 0, 0)));
Default.MeshCube.Draw(Default.Material, Matrix.TS(0.0149f * (hand == Handed.Right?1:-1), 0, 0.015f, new Vec3(0.01f * (1 - c.grip), 0.04f, 0.01f)));
Hierarchy.Pop();
Hierarchy.Pop();
// And show the pointer
Default.MeshCube.Draw(Default.Material, c.aim.ToMatrix(new Vec3(1, 1, 4) * U.cm), Color.HSV(0, 0.5f, 0.8f).ToLinear());
}
public void Update()
{
Hierarchy.Push(Matrix.T(0, 2, 0));
Mesh.Sphere.Draw(wireframeMaterial, Matrix.TS(-0.07f, 0, 0, 0.1f));
Mesh.Sphere.Draw(Material.Default, Matrix.TS(0.07f, 0, 0, 0.1f));
Tests.Screenshot("Drawing_MeshLooksLike.jpg", 600, 400, Hierarchy.ToWorld(V.XYZ(0, 0, 0.12f)), Hierarchy.ToWorld(Vec3.Zero));
Hierarchy.Pop();
/// :CodeDoc: Guides Drawing
/// At its core, drawing things in 3D is done through a combination of
/// [`Mesh`]({{site.url}}/Pages/Reference/Mesh.html)es and
/// [`Material`]({{site.url}}/Pages/Reference/Material.html)s. A Mesh
/// is a collection of triangles in 3D space that describe where the
/// surface of that 3D object is. And a Material is then a collection
/// of parameters, [`Tex`]({{site.url}}/Pages/Reference/Tex.html)tures
/// (2d images), and Shader code that are combined to describe the
/// visual properties of the Mesh's surface!
///
/// 
/// _Meshes are made from triangles!_
///
/// And in addition to that, you'll need to know a little bit about
/// matrices, which are a math construct used to describe the location,
/// orientation and scale of geometry within the 3D space! A [`Matrix`]({{site.url}}/Pages/Reference/Matrix.html)
/// isn't difficult the way we're using it, so don't worry if math
/// isn't your thing.
///
/// And then StereoKit also has a [`Model`]({{site.url}}/Pages/Reference/Model.html),
/// which is a high level combination of Meshes, Material, Matrices,
/// and a few more things! Most of the time, you'll probably be drawing
/// Models loaded from file, but it's important to have options.
///
/// Then lastly, StereoKit has easy systems for drawing [`Line`]({{site.url}}/Pages/Reference/Lines.html)s,
/// [`Text`]({{site.url}}/Pages/Reference/Text.html), [`Sprite`]({{site.url}}/Pages/Reference/Sprite.html)s
/// and various other things! These are still based on Meshes and
/// Materials under the hood, but have some complex features that can
/// make them difficult to build from scratch.
///
/// ## Meshes and Materials
///
/// To simplify things here, we're going to use the built-in assets,
/// [`Mesh.Sphere`]({{site.url}}/Pages/Reference/Mesh/Sphere.html)
/// and [`Material.Default`]({{site.url}}/Pages/Reference/Material/Default.html).
/// Mesh.Sphere is a built-in mesh generated using math when StereoKit
/// starts up, and Material.Default is a high performance simple
/// Material that serves as StereoKit's default Material. (For more
/// built-in assets, see the [`Default`]({{site.url}}/Pages/Reference/Default.html)s)
///
Mesh.Sphere.Draw(Material.Default, Matrix.Identity);
///
/// 
/// _Drawing the default sphere Mesh with the default Material._
///
/// [`Matrix.Identity`]({{site.url}}/Pages/Reference/Matrix/Identity.html)
/// can be though of as a 'No transform' Matrix, so this is drawing the
/// sphere at the origin of the 3D space.
///
/// That's pretty straightforward! StereoKit will get this Mesh/Material
/// pair onto the screen this frame. Remember that StereoKit is
/// generally an immediate mode API, so this won't show up for more
/// than the current frame. If you want it to draw every frame, you'll
/// have to call Draw every frame!
///
/// So how do you get a Mesh to begin with? In most cases you'll just
/// be working with Models, but you can get a Mesh directly from a few
/// places:
/// - [`Mesh.Sphere`]({{site.url}}/Pages/Reference/Mesh/Sphere.html), [`Mesh.Cube`]({{site.url}}/Pages/Reference/Mesh/Cube.html), and [`Mesh.Quad`]({{site.url}}/Pages/Reference/Mesh/Quad.html) are built-in mesh assets that are handy to have around.
/// - [`Mesh`]({{site.url}}/Pages/Reference/Mesh.html) has a number of static methods for generating procedural shapes, such as [`Mesh.GenerateRoundedCube`]({{site.url}}/Pages/Reference/Mesh/GenerateRoundedCube.html) or [`Mesh.GeneratePlane`]({{site.url}}/Pages/Reference/Mesh/GeneratePlane.html).
/// - A Mesh can be extracted from one of a [Model's nodes]({{site.url}}/Pages/Reference/ModelNode/Mesh.html).
/// - You can create a Mesh from a list of vertices and indices. This is more advanced, but [check the sample here]({{site.url}}/Pages/Reference/Mesh/SetVerts.html).
///
/// And where do you get a Material? Well,
/// - See built-in Materials like [`Material.PBR`]({{site.url}}/Pages/Reference/Default/MaterialPBR.html) for high-quality surface or [`Material.Unlit`]({{site.url}}/Pages/Reference/Default/MaterialUnlit.html) for fast/stylisic surfaces.
/// - A Material [constructor]({{site.url}}/Pages/Reference/Material/Material.html) can be called with a Shader. Check out [the Material guide]({{site.url}}/Pages/Guides/Materials-and-Shaders.html) for in-depth usage (Materials and Shaders are a lot of fun!).
/// - You can call [`Material.Copy`]({{site.url}}/Pages/Reference/Material/Copy.html) to create a duplicate of an existing Material.
///
/// ## Matrix basics
///
/// If you like math, this explanation is not really for you! But if
/// you like results, this will get you going where you need to go. The
/// important thing to know about a [`Matrix`]({{site.url}}/Pages/Reference/Matrix.html),
/// is that it's a good way to represent an object's transform (Translation,
/// Rotation, and Scale).
///
/// StereoKit provides a number of Matrix creation methods that allow
/// you to easily create Translation/Rotation/Scale matrices.
// The identity matrix is the matrix equivalent of '1'. You can also
// think of it as a 'no-transform' matrix.
Matrix transform = Matrix.Identity;
// Translates points 1 meter up the Y axis
transform = Matrix.T(0, 1, 0);
// Scales a point by (2,2,2), rotates it 180 on the X axis, and
// then translates it up 1 meter up the Y axis.
transform = Matrix.TRS(
new Vec3(0, 1, 0),
Quat.FromAngles(180, 0, 0),
new Vec3(2, 2, 2));
// To draw a cube at (0,-10,0) that's rotated 45 degrees around its Y
// axis:
Mesh.Cube.Draw(Material.Default, Matrix.TR(0, -10, 0, Quat.FromAngles(0, 45, 0)));
///
/// The TRS methods have a lot of permutations that can help make your
/// matrix creation code a bit shorter. Like, if you don't need to add
/// scale to your TRS matrix, there's the TR variant! No rotation? Try
/// TS! Etc. etc.
///
/// Now. Even _more_ interesting, is that many Matrices can be combined
/// into a single Matrix representing multiple transforms! This is done
/// via multiplication, and an important note here is that matrix
/// multiplication is not commutative, that is: `A*B != B*A`, so the
/// order in which you combine your matrices is important.
///
/// This can let you do things like, rotate around a pivot point, or
/// build a hierarchy of transforms! A parent/child position hierarchy
/// can be described pretty easily this way:
Matrix parentTransform = Matrix.TR(10, 0, 0, Quat.FromAngles(0, 45, 0));
Matrix childTransform = Matrix.TS(1, 1, 0, 0.2f);
Mesh.Cube.Draw(Material.Default, parentTransform);
Mesh.Cube.Draw(Material.Default, childTransform * parentTransform);
///
/// 
/// _The smaller `childTransform` is relative to `parentTransform` via multiplication._
///
/// ## Models
///
/// The easiest way to draw complex content is through a Model! A Model
/// is basically a small scene of Mesh/Material pairs at positions with
/// hierarchical relationships to eachother. If you're creating art in
/// a 3D modeling tool such as Blender, then this is basically a full
/// representation of the scene you've created there.
///
/// Since a model already has all its information within it, all you
/// need to do is provide it with a location!
model.Draw(Matrix.T(10, 10, 0));
/// 
/// _StereoKit's main format is the .gltf file._
///
/// So... that was also pretty simple! The only real trick with Models
/// is getting one in the first place, but even that's not too hard.
/// There's a lot you can do with a Model beyond just drawing it, so
/// for more details on that, check out [the Model guide]({{site.url}}/Pages/Guides/Working-with-Models.html)!
///
/// But here's the quick list of where you can get a Model to begin
/// with:
/// - [`Model.FromFile`]({{site.url}}/Pages/Reference/Model/FromFile.html) is the easiest, most common way to get a Model!
/// - [`Model.FromMesh`]({{site.url}}/Pages/Reference/Model/FromMesh.html) will let you create a very simple Model with a single function call.
/// - The [Model constructor]({{site.url}}/Pages/Reference/Model/Model.html) lets you create an empty Model, which you can then fill with ModelNodes via [`Model.AddNode`]({{site.url}}/Pages/Reference/Model/AddNode.html)
/// - You can call [`Model.Copy`]({{site.url}}/Pages/Reference/Model/Copy.html) to create a duplicate of an existing Model.
///
/// ## Lines
///
/// Being able to easily draw a line is incredibly useful for
/// debugging, and generally quite practical for many other purposes as
/// well! StereoKit has the [`Lines`]({{site.url}}/Pages/Reference/Lines.html)
/// class to assist with this, and is pretty straightforward to use.
/// There's a few variations, but at it's simplest, it's a few points,
/// a color, and a thickness.
Lines.Add(
new Vec3(2, 2, 0),
new Vec3(3, 2.5f, 0),
Color.Black, 1 * U.cm);
/// 
/// _You can also draw Rays, Poses, and multicolored lists of lines!_
///
/// ## Text
///
/// Text is drawn with a collection of rectangular quads, each mapped
/// to a character glyph on a texture. StereoKit supports rendering any
/// unicode glyphs yout throw at it, as long as the active Font has
/// that glyph defined in it! This means you can work with all sorts of
/// different languages right away, without any baking or preparation.
///
/// To draw text with the default Font, you can do this!
Text.Add("こんにちは", Matrix.T(-10, 10, 0));
///
/// 
/// _'Hello' in Japanese, I'm pretty sure._
///
/// You can create additional font styles and fonts to use with text
/// drawing, and there are a number of overloads for [`Text.Add`]({{site.url}}/Pages/Reference/Text/Add.html)
/// that allow you to change the layout or constrain to a particular
/// area. Check the docs for the method for more information about that!
///
/// ## Cool!
///
/// So that's the highlights! There's plenty more to draw and more
/// tricks to be learned, but this is a great start! There's treasures
/// in the documentation, so hunt around in there for more samples. You
/// may also be interested in the [Materials guide]({{site.url}}/Pages/Guides/Working-with-Materials.html)
/// for advanced rendering code, or [the Model guide]({{site.url}}/Pages/Guides/Working-with-Models.html)
/// for managing your visible content!
///
/// If you'd like to see all the code for this document,
/// [check it out here!](https://github.com/maluoi/StereoKit/blob/master/Examples/StereoKitTest/Guides/GuideDrawing.cs)
/// :End:
Tests.Screenshot("Drawing_Defaults.jpg", 600, 600, V.XYZ(0, 0, 1.2f), Vec3.Zero);
Tests.Screenshot("Drawing_MatrixCombine.jpg", 600, 600, V.XYZ(10, 0, 2), V.XYZ(10, 0, 0));
Tests.Screenshot("Drawing_Model.jpg", 600, 600, 60, V.XYZ(10, 10, -3f), V.XYZ(10, 10, 0));
Tests.Screenshot("Drawing_Lines.jpg", 600, 600, V.XYZ(2.5f, 2.25f, 0.8f), V.XYZ(2.5f, 2.25f, 0));
Tests.Screenshot("Drawing_Text.jpg", 600, 600, V.XYZ(-10, 10, -0.1f), V.XYZ(-10, 10, 0));
}
public void Update()
{
Tests.Screenshot("Tests/LineRenderer.jpg", 600, 600, V.XYZ(0, 0, 0.5f), Vec3.Zero);
// A ring of lines that goes out past the edge of the screen
Color32 c = Color32.White;
for (int i = 0; i < 16; i++)
{
Vec3 at = Vec3.AngleXY((i / 16.0f) * 360.0f) * 0.5f;
Lines.Add(at - V.XYZ(0, 0, 0.2f), at + V.XYZ(0, 0, 0.2f), c, 0.01f);
}
// A Circle
c = new Color(1, .5f, .5f, 1).ToLinear();
LinePoint[] points = new LinePoint[17];
for (int i = 0; i < points.Length; i++)
{
points[i] = new LinePoint(
Vec3.AngleXY((i / (float)(points.Length - 1)) * 360.0f) * 0.4f,
c, 0.01f);
}
Lines.Add(points);
// A square, worst case for this system
c = new Color(.5f, 1, .5f, 1).ToLinear();
Lines.Add(new LinePoint[] {
new LinePoint(V.XY0(-0.25f, 0.25f), c, 0.01f),
new LinePoint(V.XY0(0.25f, 0.25f), c, 0.01f),
new LinePoint(V.XY0(0.25f, -0.25f), c, 0.01f),
new LinePoint(V.XY0(-0.25f, -0.25f), c, 0.01f),
new LinePoint(V.XY0(-0.25f, 0.25f), c, 0.01f),
});
// A beveled square
c = new Color(.5f, .5f, 1, 1).ToLinear();
Lines.Add(new LinePoint[] {
new LinePoint(V.XY0(-0.2f, 0.19f), c, 0.01f),
new LinePoint(V.XY0(-0.19f, 0.2f), c, 0.01f),
new LinePoint(V.XY0(0.19f, 0.2f), c, 0.01f),
new LinePoint(V.XY0(0.2f, 0.19f), c, 0.01f),
new LinePoint(V.XY0(0.2f, -0.19f), c, 0.01f),
new LinePoint(V.XY0(0.19f, -0.2f), c, 0.01f),
new LinePoint(V.XY0(-0.19f, -0.2f), c, 0.01f),
new LinePoint(V.XY0(-0.2f, -0.19f), c, 0.01f),
new LinePoint(V.XY0(-0.2f, 0.19f), c, 0.01f),
});
// an Icosohedron
float t = (1.0f + SKMath.Sqrt(5.0f)) / 2.0f;
float s = 0.08f;
float s2 = 0.3f;
int h = 0;
Vec3 v;
Hierarchy.Push(Matrix.R(Quat.FromAngles(10, 10, 10)));
v = V.XYZ(-1, t, 0) * s; Lines.Add(v, v * s2, Color.HSV((h++) / 12.0f, 0.8f, 0.8f).ToLinear(), 0.01f);
v = V.XYZ(1, t, 0) * s; Lines.Add(v, v * s2, Color.HSV((h++) / 12.0f, 0.8f, 0.8f).ToLinear(), 0.01f);
v = V.XYZ(-1, -t, 0) * s; Lines.Add(v, v * s2, Color.HSV((h++) / 12.0f, 0.8f, 0.8f).ToLinear(), 0.01f);
v = V.XYZ(1, -t, 0) * s; Lines.Add(v, v * s2, Color.HSV((h++) / 12.0f, 0.8f, 0.8f).ToLinear(), 0.01f);
v = V.XYZ(0, -1, t) * s; Lines.Add(v, v * s2, Color.HSV((h++) / 12.0f, 0.8f, 0.8f).ToLinear(), 0.01f);
v = V.XYZ(0, 1, t) * s; Lines.Add(v, v * s2, Color.HSV((h++) / 12.0f, 0.8f, 0.8f).ToLinear(), 0.01f);
v = V.XYZ(0, -1, -t) * s; Lines.Add(v, v * s2, Color.HSV((h++) / 12.0f, 0.8f, 0.8f).ToLinear(), 0.01f);
v = V.XYZ(0, 1, -t) * s; Lines.Add(v, v * s2, Color.HSV((h++) / 12.0f, 0.8f, 0.8f).ToLinear(), 0.01f);
v = V.XYZ(t, 0, -1) * s; Lines.Add(v, v * s2, Color.HSV((h++) / 12.0f, 0.8f, 0.8f).ToLinear(), 0.01f);
v = V.XYZ(t, 0, 1) * s; Lines.Add(v, v * s2, Color.HSV((h++) / 12.0f, 0.8f, 0.8f).ToLinear(), 0.01f);
v = V.XYZ(-t, 0, -1) * s; Lines.Add(v, v * s2, Color.HSV((h++) / 12.0f, 0.8f, 0.8f).ToLinear(), 0.01f);
v = V.XYZ(-t, 0, 1) * s; Lines.Add(v, v * s2, Color.HSV((h++) / 12.0f, 0.8f, 0.8f).ToLinear(), 0.01f);
Hierarchy.Pop();
}
bool TestMatrixTransform()
{
Vec3 translate = new Vec3(10, 0, 0);
Vec3 rotate = new Vec3(0, 90, 0);
Vec3 scale = new Vec3(2, 2, 2);
Matrix mat = Matrix.TRS(translate, Quat.FromAngles(rotate), scale);
Log.Info($"Transform matrix: {translate} {rotate} {scale}");
// Check ray transforms
Ray ray1 = new Ray(Vec3.Zero, V.XYZ(0, 0, 1));
Ray ray2 = new Ray(V.XYZ(1, 0, 0), V.XYZ(0, 0, 1));
Ray tRay1 = mat.Transform(ray1);
Ray tRay2 = mat * ray2;
Log.Info($"Ray {ray1} -> {tRay1}");
Log.Info($"Ray {ray2} -> {tRay2}");
if (Vec3.Distance(tRay1.position, V.XYZ(10, 0, 0)) > tolerance)
{
return(false);
}
if (Vec3.Distance(tRay1.direction, V.XYZ(2, 0, 0)) > tolerance)
{
return(false);
}
if (Vec3.Distance(tRay2.position, V.XYZ(10, 0, -2)) > tolerance)
{
return(false);
}
if (Vec3.Distance(tRay2.direction, V.XYZ(2, 0, 0)) > tolerance)
{
return(false);
}
// Check pose transforms
Pose pose1 = Pose.Identity;
Pose pose2 = new Pose(V.XYZ(1, 0, 0), Quat.FromAngles(0, 90, 0));
Pose tPose1 = mat.Transform(pose1);
Pose tPose2 = mat * pose2;
Log.Info($"Pose {pose1} -> {tPose1}");
Log.Info($"Pose {pose2} -> {tPose2}");
if (Vec3.Distance(tPose1.position, V.XYZ(10, 0, 0)) > tolerance)
{
return(false);
}
if (Vec3.Distance(tPose1.Forward, V.XYZ(-1, 0, 0)) > tolerance)
{
return(false);
}
if (Vec3.Distance(tPose2.position, V.XYZ(10, 0, -2)) > tolerance)
{
return(false);
}
if (Vec3.Distance(tPose2.Forward, V.XYZ(0, 0, 1)) > tolerance)
{
return(false);
}
return(true);
}
public void Update()
{
Hierarchy.Push(Matrix.TRS(V.XYZ(0.5f, -0.25f, -0.5f), Quat.LookDir(-1, 0, 1), 0.2f));
Tests.Screenshot("ProceduralGeometry.jpg", 600, 600, V.XYZ(0.3f, -0.25f, -0.3f), V.XYZ(0.5f, -0.25f, -0.5f));
Tests.Screenshot("ProceduralGrid.jpg", 600, 600, Hierarchy.ToWorld(V.X0Z(-2, -0.7f)), Hierarchy.ToWorld(V.X0Z(-2, 0)));
// Plane!
Mesh planeMesh = demoPlaneMesh;
Model planeModel = demoPlaneModel;
/// :CodeSample: Mesh.GeneratePlane
/// Drawing both a Mesh and a Model generated this way is reasonably simple,
/// here's a short example! For the Mesh, you'll need to create your own material,
/// we just loaded up the default Material here.
Matrix planeTransform = Matrix.T(-.5f, -1, 0);
planeMesh.Draw(Default.Material, planeTransform);
planeTransform = Matrix.T(.5f, -1, 0);
planeModel.Draw(planeTransform);
/// :End:
// Cube!
Mesh cubeMesh = demoCubeMesh;
Model cubeModel = demoCubeModel;
/// :CodeSample: Mesh.GenerateCube
/// Drawing both a Mesh and a Model generated this way is reasonably simple,
/// here's a short example! For the Mesh, you'll need to create your own material,
/// we just loaded up the default Material here.
// Call this code every Step
Matrix cubeTransform = Matrix.T(-.5f, -.5f, 0);
cubeMesh.Draw(Default.Material, cubeTransform);
cubeTransform = Matrix.T(.5f, -.5f, 0);
cubeModel.Draw(cubeTransform);
/// :End:
// Rounded Cube!
Mesh roundedCubeMesh = demoRoundedCubeMesh;
Model roundedCubeModel = demoRoundedCubeModel;
/// :CodeSample: Mesh Mesh.GenerateRoundedCube Mesh.Draw
/// Drawing both a Mesh and a Model generated this way is reasonably simple,
/// here's a short example! For the Mesh, you'll need to create your own material,
/// we just loaded up the default Material here.
// Call this code every Step
Matrix roundedCubeTransform = Matrix.T(-.5f, 0, 0);
roundedCubeMesh.Draw(Default.Material, roundedCubeTransform);
roundedCubeTransform = Matrix.T(.5f, 0, 0);
roundedCubeModel.Draw(roundedCubeTransform);
/// :End:
// Rounded Sphere!
Mesh sphereMesh = demoSphereMesh;
Model sphereModel = demoSphereModel;
/// :CodeSample: Mesh.GenerateSphere
/// Drawing both a Mesh and a Model generated this way is reasonably simple,
/// here's a short example! For the Mesh, you'll need to create your own material,
/// we just loaded up the default Material here.
// Call this code every Step
Matrix sphereTransform = Matrix.T(-.5f, .5f, 0);
sphereMesh.Draw(Default.Material, sphereTransform);
sphereTransform = Matrix.T(.5f, .5f, 0);
sphereModel.Draw(sphereTransform);
/// :End:
// Cylinder!
Mesh cylinderMesh = demoCylinderMesh;
Model cylinderModel = demoCylinderModel;
/// :CodeSample: Mesh.GenerateCylinder
/// Drawing both a Mesh and a Model generated this way is reasonably simple,
/// here's a short example! For the Mesh, you'll need to create your own material,
/// we just loaded up the default Material here.
// Call this code every Step
Matrix cylinderTransform = Matrix.T(-.5f, 1, 0);
cylinderMesh.Draw(Default.Material, cylinderTransform);
cylinderTransform = Matrix.T(.5f, 1, 0);
cylinderModel.Draw(cylinderTransform);
/// :End:
demoProcMesh.Draw(Default.Material, Matrix.TR(-2, 0, 0, Quat.FromAngles(-90, 0, 0)));
Hierarchy.Pop();
Text.Add(title, titlePose);
Text.Add(description, descPose, V.XY(0.4f, 0), TextFit.Wrap, TextAlign.TopCenter, TextAlign.TopLeft);
}
void StepMenu(Hand hand)
{
// Animate the menu a bit
float time = (Time.Elapsedf * 24);
menuPose.position = Vec3.Lerp(menuPose.position, destPose.position, time);
menuPose.orientation = Quat.Slerp(menuPose.orientation, destPose.orientation, time);
activation = SKMath.Lerp(activation, 1, time);
// Pre-calculate some circle traversal values
HandRadialLayer layer = layers[activeLayer];
int count = layer.items.Length;
float step = 360 / count;
float halfStep = step / 2;
// Push the Menu's pose onto the stack, so we can draw, and work
// in local space.
Hierarchy.Push(menuPose.ToMatrix(activation));
// Calculate the status of the menu!
Vec3 tipWorld = hand[FingerId.Index, JointId.Tip].position;
Vec3 tipLocal = Hierarchy.ToLocal(tipWorld);
float magSq = tipLocal.MagnitudeSq;
bool onMenu = tipLocal.z > -0.02f && tipLocal.z < 0.02f;
bool focused = onMenu && magSq > minDist * minDist;
bool selected = onMenu && magSq > midDist * midDist;
bool cancel = magSq > maxDist * maxDist;
// Find where our finger is pointing to, and draw that
float fingerAngle = (float)Math.Atan2(tipLocal.y, tipLocal.x) * Units.rad2deg - (layer.startAngle + angleOffset);
while (fingerAngle < 0)
{
fingerAngle += 360;
}
int angleId = (int)(fingerAngle / step);
Lines.Add(Vec3.Zero, new Vec3(tipLocal.x, tipLocal.y, 0), Color.White * 0.5f, 0.001f);
// Draw the menu inner and outer circles
Lines.Add(circle);
Lines.Add(innerCircle);
// Now draw each of the menu items!
for (int i = 0; i < count; i++)
{
float currAngle = i * step + layer.startAngle + angleOffset;
bool highlightText = focused && angleId == i;
bool highlightLine = highlightText || (focused && (angleId + 1) % count == i);
Vec3 dir = Vec3.AngleXY(currAngle);
Lines.Add(dir * minDist, dir * maxDist, highlightLine ? Color.White : Color.White * 0.5f, highlightLine?0.002f:0.001f);
Text.Add(layer.items[i].name, Matrix.TRS(Vec3.AngleXY(currAngle + halfStep) * midDist, Quat.FromAngles(0, 0, currAngle + halfStep - 90), highlightText?1.2f:1), TextAlign.XCenter | TextAlign.YBottom);
}
// Done with local work
Hierarchy.Pop();
// Execute any actions that were discovered
// But not if we're still in the process of animating, interaction values
// could be pretty incorrect when we're still lerping around.
if (activation < 0.95f)
{
return;
}
if (selected)
{
SelectItem(layer.items[angleId], tipWorld, (angleId + 0.5f) * step);
}
if (cancel)
{
Close();
}
}
public void Initialize()
{
/// :CodeSample: Model Model.AddNode Model.FindNode ModelNode.AddChild
/// ### Assembling a Model
/// While normally you'll load Models from file, you can also assemble
/// them yourself procedurally! This example shows assembling a simple
/// hierarchy of visual and empty nodes.
Model model = new Model();
model
.AddNode("Root", Matrix.S(0.2f), Mesh.Cube, Material.Default)
.AddChild("Sub", Matrix.TR(V.XYZ(0.5f, 0, 0), Quat.FromAngles(0, 0, 45)), Mesh.Cube, Material.Default)
.AddChild("Surface", Matrix.TRS(V.XYZ(0.5f, 0, 0), Quat.LookDir(V.XYZ(1, 0, 0)), V.XYZ(1, 1, 1)));
ModelNode surfaceNode = model.FindNode("Surface");
surfaceNode.AddChild("UnitX", Matrix.T(Vec3.UnitX));
surfaceNode.AddChild("UnitY", Matrix.T(Vec3.UnitY));
surfaceNode.AddChild("UnitZ", Matrix.T(Vec3.UnitZ));
/// :End:
Tests.Test(() => model.FindNode("NotPresent") == null);
/// :CodeSample: Model Model.Nodes
/// ### Simple iteration
/// Walking through the Model's list of nodes is pretty
/// straightforward! This will touch every ModelNode in the Model,
/// in the order they were defined, regardless of hierarchy position
/// or contents.
Log.Info("Iterate nodes:");
foreach (ModelNode node in model.Nodes)
{
Log.Info(" " + node.Name);
}
/// :End:
/// :CodeSample: Model Model.Visuals
/// ### Simple iteration of visual nodes
/// This will iterate through every ModelNode in the Model with visual
/// data attached to it!
Log.Info("Iterate visuals:");
foreach (ModelNode node in model.Visuals)
{
Log.Info(" " + node.Name);
}
/// :End:
/// :CodeSample: Model Model.Visuals Model.Nodes
/// ### Tagged Nodes
/// You can search through Visuals and Nodes
var nodes = model.Visuals
.Where(n => n.Name.StartsWith("[Wire]"));
foreach (var node in nodes)
{
node.Material = node.Material.Copy();
node.Material.Wireframe = true;
}
/// :End:
Log.Info("Recursive ModelNode traversal:");
RecursiveTraversal(model.RootNode);
Log.Info("Depth first ModelNode traversal:");
DepthFirstTraversal(model);
for (int i = 0; i < model.Nodes.Count; i++)
{
Log.Info($"{model.Nodes[i].Name} using shader {model.Nodes[i].Material?.Shader.Name}");
}
_model = model;
_surfaceNode = surfaceNode;
}
