private void buttonStart_Click(object sender, EventArgs e)
{
bool[] DOStatus;
Adam_AIAlarmMode mode;
if (m_bStart) // was started
{
panelAO.Enabled = false;
panelAlarm.Enabled = false;
m_bStart = false;
timer1.Enabled = false;
adamCom.CloseComPort();
buttonStart.Text = "Start";
}
else
{
if (adamCom.OpenComPort())
{
// set COM port state, 9600,N,8,1
adamCom.SetComPortState(Baudrate.Baud_9600, Databits.Eight, Parity.None, Stopbits.One);
// set COM port timeout
adamCom.SetComPortTimeout(500, 500, 0, 500, 0);
m_iCount = 0; // reset the reading counter
// get module config
if (!adamCom.Configuration(m_iAddr).GetModuleConfig(out m_adamConfig))
{
adamCom.CloseComPort();
MessageBox.Show("Failed to get module config!", "Error");
return;
}
// detect alarm
if (adamCom.Alarm(m_iAddr).GetModeAlarmDO(2, out mode, out DOStatus))
{
m_DOStatus[0] = DOStatus[0];
m_DOStatus[1] = DOStatus[1];
txtMode.Text = mode.ToString();
if (mode == Adam_AIAlarmMode.Disable) // alarm is disabled
{
buttonDO0.Enabled = true;
buttonDO1.Enabled = true;
}
else
{
buttonDO0.Enabled = false;
buttonDO1.Enabled = false;
}
}
//
panelAO.Enabled = true;
panelAlarm.Enabled = true;
timer1.Enabled = true; // enable timer
buttonStart.Text = "Stop";
m_bStart = true; // starting flag
}
else
{
MessageBox.Show("Failed to open COM port!", "Error");
}
}
}
private void buttonStart_Click(object sender, EventArgs e)
{
if (m_bStart) // was started
{
panelLED.Enabled = false;
panelCount.Enabled = false;
m_bStart = false;
timer1.Enabled = false;
adamCom.CloseComPort();
buttonStart.Text = "Start";
}
else
{
if (adamCom.OpenComPort())
{
// set COM port state, 9600,N,8,1
adamCom.SetComPortState(Baudrate.Baud_9600, Databits.Eight, Parity.None, Stopbits.One);
// set COM port timeout
adamCom.SetComPortTimeout(500, 500, 0, 500, 0);
m_iCount = 0; // reset the reading counter
// get module config
if (!adamCom.Configuration(m_iAddr).GetModuleConfig(out m_adamConfig))
{
adamCom.CloseComPort();
MessageBox.Show("Failed to get module config!", "Error");
return;
}
// LED panel
panelLED.Enabled = true;
RefreshLEDSource();
// Counter panel
if (m_adamConfig.TypeCode == (byte)Adam4080_CounterMode.Counter)
{
panelCount.Enabled = true;
cbxChannel.SelectedIndex = 0;
RefreshAlarmButton();
}
else
{
panelCount.Enabled = false;
}
timer1.Enabled = true; // enable timer
buttonStart.Text = "Stop";
m_bStart = true; // starting flag
}
else
{
MessageBox.Show("Failed to open COM port!", "Error");
}
}
}
public VoltageController(VM_MSConfig msConfig)
{
Config = msConfig;
m_iCom = 3; // using COM4
m_iAddr = 1; // the slave address is 1
m_iCount = 0; // the counting start from 0
m_bStart = false;
m_Adam4000Type = Adam4000Type.Adam4019P; // the sample is for ADAM-4019P
m_iChTotal = AnalogInput.GetChannelTotal(m_Adam4000Type);
m_byRange = new byte[m_iChTotal];
adamCom = new AdamCom(m_iCom);
adamCom.Checksum = false; // disbale checksum
Module = m_Adam4000Type.ToString();
if (adamCom.OpenComPort())
{
// set COM port state, 9600,N,8,1
adamCom.SetComPortState(Baudrate.Baud_9600, Databits.Eight, Parity.None, Stopbits.One);
// set COM port timeout
adamCom.SetComPortTimeout(500, 500, 0, 500, 0);
m_iCount = 0; // reset the reading counter
// get module config
if (!adamCom.Configuration(m_iAddr).GetModuleConfig(out m_adamConfig))
{
adamCom.CloseComPort();
LogHelper.WriteErrorLog("Failed to get module config!");
return;
}
//
RefreshChannelEnable();
RefreshChannelRange();
//
m_bStart = true; // starting flag
}
else
{
LogHelper.WriteErrorLog("Failed to open COM port!");
}
}
private void buttonStart_Click(object sender, EventArgs e)
{
if (m_bStart) // was started
{
tabControl1.Enabled = false;
m_bStart = false;
timer1.Enabled = false;
adamCom.CloseComPort();
buttonStart.Text = "Start";
}
else
{
if (adamCom.OpenComPort())
{
// set COM port state, 9600,N,8,1
adamCom.SetComPortState(Baudrate.Baud_9600, Databits.Eight, Parity.None, Stopbits.One);
// set COM port timeout
adamCom.SetComPortTimeout(500, 500, 0, 500, 0);
m_iCount = 0; // reset the reading counter
// get module config
if (!adamCom.Configuration(m_iAddr).GetModuleConfig(out m_adamConfig))
{
adamCom.CloseComPort();
MessageBox.Show("Failed to get module config!", "Error");
return;
}
//
RefreshChannelEnable();
//
tabControl1.Enabled = true;
timer1.Enabled = true; // enable timer
buttonStart.Text = "Stop";
m_bStart = true; // starting flag
}
else
{
MessageBox.Show("Failed to open COM port!", "Error");
}
}
}
public void Open()
{
adamCom = new AdamCom(SerialPortNumber);
adamCom.Checksum = Checksum;
bool opened = false;
try
{
if (!adamCom.IsOpen)
{
opened = adamCom.OpenComPort();
}
if (!opened)
{
return;
}
// set COM port state, 9600,N,8,1
adamCom.SetComPortState(Baudrate.Baud_9600, Databits.Eight, Parity.None, Stopbits.One, FlowControl.None);
// set COM port timeout
adamCom.SetComPortTimeout(500, 1000, 0, 1000, 0);
if (!adamCom.Configuration(address).GetModuleConfig(out config))
{
opened = false;
adamCom.CloseComPort();
return;
}
}
finally
{
Opened = opened;
}
}