/// <summary>
/// Method to write ITEM-CODE and ITEM-DESCRIPTION entries to enable import of the PCF file into the Plant 3D "PLANTPCFTOISO" command.
/// </summary>
/// <param name="element">The current element being written.</param>
/// <returns>StringBuilder containing the entries.</returns>
public static StringBuilder Plant3DIsoWriter(Element element, Document doc)
{
//If an element has EXISTING in it's PCF_ELEM_SPEC the writing of ITEM-CODE will be skipped, making Plant 3D ISO treat it as existing.
pdef elemSpec = new plst().PCF_ELEM_SPEC;
Parameter pm = element.get_Parameter(elemSpec.Guid);
if (string.Equals(pm.AsString(), "EXISTING"))
{
return(new StringBuilder());
}
//Write ITEM-CODE et al
StringBuilder sb = new StringBuilder();
pdef matId = new plst().PCF_MAT_ID;
pdef matDescr = new plst().PCF_MAT_DESCR;
int itemCode = element.get_Parameter(matId.Guid).AsInteger();
string itemDescr = element.get_Parameter(matDescr.Guid).AsString();
string key = MepUtils.GetElementPipingSystemType(element, doc).Abbreviation;
sb.AppendLine(" ITEM-CODE " + key + "-" + itemCode);
sb.AppendLine(" ITEM-DESCRIPTION " + itemDescr);
return(sb);
}
private Connector DetectUnconnectedConnector(Document doc, Connector knownCon)
{
var allCons = MepUtils.GetALLConnectorsInDocument(doc);
return(allCons.Where(c => c.Equalz(knownCon, 0.00328) && c.Owner.Id.IntegerValue != knownCon.Owner.Id.IntegerValue).FirstOrDefault());
}
//Choose one and traverse in both directions finding other supports on same pipe
//Continue conditions:
// 1. Element is Pipe -> add to brokenPipesList, continue
// a. AND PipingSystemAbbreviation remains unchanged
// b. AND PCF_ELEM_SPEC remains unchanged
// 2. Element is PipeAccessory and is one of the Support family instances -> add to supports on pipe
//Break conditions:
// 1. Element is PipeFitting -> Break
// 2. Element is PipeAccessory and NOT an instance of a Support family -> Break
// 3. Element is Pipe AND PipingSystemAbbreviation changes -> Break
// 4. Element is Pipe AND PCF_ELEM_SPEC changes -> Break
// 5. Free end -> Break
public void Traverse(Document doc)
{
//Get connectors from the Seed Element
Cons cons = MepUtils.GetConnectors(SeedElement);
//Assign the connectors from the support to the two directions
Connector firstSideCon = cons.Primary; Connector secondSideCon = cons.Secondary;
#region SpecFinder
//The spec of the support can be different from the pipe's
//It is decided that the spec of the pipe is decisive
//This means spec must be determined before loop starts
//ATTENTION: If pipes on both sides have different spec -> no traversal needed -> the support is placed at a natural boundary
Connector refFirstCon = null; Connector refSecondCon = null;
if (firstSideCon.IsConnected)
{
var refFirstCons = MepUtils.GetAllConnectorsFromConnectorSet(firstSideCon.AllRefs);
refFirstCon = refFirstCons.Where(x => x.Owner.IsType <Pipe>()).FirstOrDefault();
}
else
{
refFirstCon = DetectUnconnectedConnector(doc, firstSideCon);
}
if (secondSideCon.IsConnected)
{
var refSecondCons = MepUtils.GetAllConnectorsFromConnectorSet(secondSideCon.AllRefs);
refSecondCon = refSecondCons.Where(x => x.Owner.IsType <Pipe>()).FirstOrDefault();
}
else
{
refSecondCon = DetectUnconnectedConnector(doc, secondSideCon);
}
string firstSpec = ""; string secondSpec = ""; string spec = "";
if (refFirstCon != null)
{
Element el = refFirstCon.Owner;
firstSpec = el.get_Parameter(new plst().PCF_ELEM_SPEC.Guid).AsString();
}
if (refSecondCon != null)
{
Element el = refSecondCon.Owner;
secondSpec = el.get_Parameter(new plst().PCF_ELEM_SPEC.Guid).AsString();
}
if (firstSpec.IsNullOrEmpty() && secondSpec.IsNullOrEmpty())
{
return; //<- Both empty
}
if (!firstSpec.IsNullOrEmpty() && secondSpec.IsNullOrEmpty())
{
spec = firstSpec; //<- First not empty, but second
}
else if (firstSpec.IsNullOrEmpty() && !secondSpec.IsNullOrEmpty())
{
spec = secondSpec; //<- Second not empty, but first
}
else
{
if (firstSpec == secondSpec)
{
spec = firstSpec;
}
else
{
return; //<- Different specs -> support is at natural boundary
}
}
#endregion
//Loop controller
bool Continue = true;
//Side controller
bool firstSideDone = false;
//Loop variables
Connector start = null;
//Initialize first loop
start = firstSideCon;
//Loop guard
int i = 0;
while (Continue)
{
//Loop guard, if too many iterations something is wrong
i++;
if (i > 10000)
{
throw new Exception("Traverse loop in BrokenPipes has reached 10000 iterations -> something is wrong! \n" +
"Do you really have 10000 pipe pieces?");
}
//Using a seed connector, "start", get the next element
//If "start" does not yield a connector to continue on -> stop this side
//Determine if next element is eligible for continue
//If yes, add element to collections, get next connector
//If not, continue next side if side not already done
Connector refCon;
if (start.IsConnected)
{
var refCons = MepUtils.GetAllConnectorsFromConnectorSet(start.AllRefs); //<- DOES ALLREFS RETURN NULL IF EMPTY???
refCon = refCons.Where(x => x.Owner.IsType <Pipe>() || x.Owner.IsType <FamilyInstance>()).FirstOrDefault();
}
else
{
refCon = DetectUnconnectedConnector(doc, start);
}
//Break condition 5: Free end
if (refCon == null) //Dead end
{
if (firstSideDone == false)
{
//Dead end -> first side done -> continue second side
firstSideDone = true; start = secondSideCon; continue;
}
else
{
Continue = false; break;
} //Dead end -> both sides done -> end traversal loop
}
Element elementToConsider = refCon.Owner;
//Determine if the element is a support
bool isSupport = elementToConsider.ComponentClass1(doc) == "Pipe Support";
//Continuation 1a
string elementSysAbr = elementToConsider.get_Parameter(BuiltInParameter.RBS_DUCT_PIPE_SYSTEM_ABBREVIATION_PARAM).AsString();
if (CurSysAbr != elementSysAbr)
{
if (firstSideDone == false)
{
//Dead end -> first side done -> continue second side
firstSideDone = true; start = secondSideCon; continue;
}
else
{
Continue = false; break;
} //Dead end -> both sides done -> end traversal
}
//Continuation 1b
string elementSpec = elementToConsider.get_Parameter(new plst().PCF_ELEM_SPEC.Guid).AsString();
if (spec != elementSpec && !isSupport) //The spec can be different for another support on the pipe, so it must accept those
{
if (firstSideDone == false)
{
//Dead end -> first side done -> continue second side
firstSideDone = true; start = secondSideCon; continue;
}
else
{
Continue = false; break;
} //Dead end -> both sides done -> end traversal
}
switch (elementToConsider)
{
//Remove from pipeList, add to brokenPipesList, continue
case Pipe pipe:
BrokenPipes.Add(elementToConsider);
start = (from Connector c in pipe.ConnectorManager.Connectors //Find next seed connector
where c.Id != refCon.Id && (int)c.ConnectorType == 1
select c).FirstOrDefault();
break;
case FamilyInstance fi:
//Break condition 1: Element is a fitting
if (elementToConsider.Category.Id.IntegerValue == (int)BuiltInCategory.OST_PipeFitting)
{
if (firstSideDone == false)
{
//Dead end -> first side done -> continue second side
firstSideDone = true; start = secondSideCon; continue;
}
else
{
Continue = false; break;
} //Dead end -> both sides done -> end traversal
}
//Break condition 2: Element is a PipeAccessory and NOT a support
if (elementToConsider.Category.Id.IntegerValue == (int)BuiltInCategory.OST_PipeAccessory &&
!isSupport)
{
if (firstSideDone == false)
{
//Dead end -> first side done -> continue second side
firstSideDone = true; start = secondSideCon; continue;
}
else
{
Continue = false; break;
} //Dead end -> both sides done -> end traversal
}
//If execution reaches this part, then the element is a support and is eligible for consideration
SupportsOnPipe.Add(elementToConsider);
//Find next seed connector
Cons supportCons = MepUtils.GetConnectors(elementToConsider);
if (refCon.GetMEPConnectorInfo().IsPrimary)
{
start = supportCons.Secondary;
}
else
{
start = supportCons.Primary;
}
break;
default:
break;
}
}
}
public static void SetWallThicknessPipes(HashSet <Element> elements)
{
//Wallthicknes for pipes are hardcoded until further notice
//Values are from 10216-2 - Seamless steel tubes for pressure purposes
//TODO: Implement a way to read values from excel
Dictionary <int, string> pipeWallThk = new Dictionary <int, string>
{
[10] = "1.8 mm",
[15] = "2 mm",
[20] = "2.3 mm",
[25] = "2.6 mm",
[32] = "2.6 mm",
[40] = "2.6 mm",
[50] = "2.9 mm",
[65] = "2.9 mm",
[80] = "3.2 mm",
[100] = "3.6 mm",
[125] = "4 mm",
[150] = "4.5 mm",
[200] = "6.3 mm",
[250] = "6.3 mm",
[300] = "7.1 mm",
[350] = "8 mm",
[400] = "8.8 mm",
[450] = "10 mm",
[500] = "11 mm",
[600] = "12.5 mm"
};
pdef wallThkDef = new plst().PCF_ELEM_CII_WALLTHK;
pdef elemType = new plst().PCF_ELEM_TYPE;
foreach (Element element in elements)
{
//See if the parameter already has value and skip element if it has
if (!string.IsNullOrEmpty(element.get_Parameter(wallThkDef.Guid).AsString()))
{
continue;
}
if (element.get_Parameter(elemType.Guid).AsString().Equals("SUPPORT"))
{
continue;
}
//Retrieve the correct wallthickness from dictionary and set it on the element
Parameter wallThkParameter = element.get_Parameter(wallThkDef.Guid);
//Get connector set for the pipes
ConnectorSet connectorSet = MepUtils.GetConnectorManager(element).Connectors;
Connector c1 = null;
if (element is Pipe)
{
//Filter out non-end types of connectors
c1 = (from Connector connector in connectorSet
where connector.ConnectorType.ToString().Equals("End")
select connector).FirstOrDefault();
}
if (element is FamilyInstance)
{
c1 = (from Connector connector in connectorSet
where connector.GetMEPConnectorInfo().IsPrimary
select connector).FirstOrDefault();
Connector c2 = (from Connector connector in connectorSet
where connector.GetMEPConnectorInfo().IsSecondary
select connector).FirstOrDefault();
if (c2 != null)
{
if (c1.Radius > c2.Radius)
{
c1 = c2;
}
}
}
string data = string.Empty;
string source = Conversion.PipeSizeToMm(c1.Radius);
int dia = Convert.ToInt32(source);
pipeWallThk.TryGetValue(dia, out data);
wallThkParameter.Set(data);
}
}
