//// BUTTONCLICK HANDLERS ///////////////////////////////////////////////
public DialogResult OKButton_Click(object sender, EventArgs e)
{
DialogResult dr = DialogResult.Cancel;
if (ap.modified)
{
INCCDB.AcquireSelector sel = new INCCDB.AcquireSelector(det, ap.item_type, DateTime.Now);
ap.MeasDateTime = sel.TimeStamp; ap.lm.TimeStamp = sel.TimeStamp;
NC.App.DB.AddAcquireParams(sel, ap); // it's a new one, not the existing one modified
}
// The acquire is set to occur
if (ap.data_src != ConstructedSource.Reanalysis) // Reanalysis is a bit backwards, the correct measurement is fully constructed before this point
{
LMAcquire.ResetMeasurement();
}
switch (ap.data_src)
{
case ConstructedSource.Live: // set up the instrument list for the action controller
Integ.BuildMeasurement(ap, det, mo);
UIIntegration.Controller.file = false; // make sure to use the DAQ controller, not the file controller
NC.App.AppContext.FileInput = null; // reset the cmd line file input flag
if (det.ListMode)
{
// patch override lm.Interval with run_count_time from dialog
// the acquire dialogs field values, as seen and modified by the user, override the LM-only acquire settings for virtual SR measurements
NC.App.Opstate.Measurement.AcquireState.lm.Interval = NC.App.Opstate.Measurement.AcquireState.run_count_time;
NC.App.Opstate.Measurement.AcquireState.lm.Cycles = NC.App.Opstate.Measurement.AcquireState.num_runs;
// Check NC.App.Opstate.Measurement.AnalysisParams for at least one VSR
// If not present, inform and pop up the wizard
// If present, inform with new dialog, do not pop up the wizard
if (NC.App.Opstate.Measurement.AnalysisParams.HasMatchingVSR(det.MultiplicityParams))
{
dr = DialogResult.OK;
}
else
{
dr = (new LMAcquire(ap, det, fromINCC5Acq: true)).ShowDialog(); // analyzers are created in here, placed on global measurement
if (dr == DialogResult.OK)
{
NC.App.DB.UpdateAcquireParams(ap); //update it again
NC.App.DB.UpdateDetector(det);
}
}
if (dr == DialogResult.OK)
{
// if ok, the analyzers are set up, so can kick it off now.
UIIntegration.Controller.ActivateDetector(det);
}
}
else
{
SRInstrument sri = new SRInstrument(det);
sri.selected = true;
sri.Init(NC.App.Loggers.Logger(LMLoggers.AppSection.Data), NC.App.Loggers.Logger(LMLoggers.AppSection.Analysis));
if (!Instruments.All.Contains(sri))
{
Instruments.All.Add(sri); // add to global runtime list
}
dr = DialogResult.OK;
}
break;
case ConstructedSource.DB:
NC.App.AppContext.DBDataAssay = true;
UIIntegration.Controller.file = true;
IDDAcquireDBMeas dbdlg = new IDDAcquireDBMeas(this);
if (dbdlg.HasItems())
{
dr = dbdlg.ShowDialog();
if (dr == DialogResult.OK)
{
Integ.BuildMeasurement(ap, det, mo);
DateTimeOffset dto = dbdlg.measurementId.MeasDateTime;
NC.App.Logger(LMLoggers.AppSection.App).TraceEvent(LogLevels.Info, 87654,
"Using " + dto.ToString("MMM dd yyy HH:mm:ss.ff K"));
NC.App.Opstate.Measurement.MeasDate = dto;
// get the cycles for the selected measurement from the database, and add them to the current measurement
CycleList cl = NC.App.DB.GetCycles(det, dbdlg.measurementId, ap.data_src); // APluralityOfMultiplicityAnalyzers: // URGENT: get all the cycles associated with each analzyer, restoring into the correct key->result pair
NC.App.Opstate.Measurement.Add(cl);
// use the cycle time interval as found in the data, taking the first entry because equal intervals are assumed
if (cl.Count > 0)
{
NC.App.Opstate.Measurement.AcquireState.lm.Interval = NC.App.Opstate.Measurement.AcquireState.run_count_time
= cl[0].TS.TotalSeconds;
}
NC.App.DB.UpdateAcquireParams(ap); //update it again
}
}
else
{
MessageBox.Show("No items found in database matching these parameters", "WARNING");
}
break;
case ConstructedSource.Manual:
UIIntegration.Controller.file = true;
NC.App.AppContext.DBDataAssay = true;
IDDManualDataEntry mdlg = new IDDManualDataEntry();
mdlg.AH = this;
dr = mdlg.ShowDialog(); // the work constructing the measurement is done in the dialog class
break;
case ConstructedSource.Reanalysis:
UIIntegration.Controller.file = true;
NC.App.AppContext.DBDataAssay = true;
dr = DialogResult.OK;
// the measurement re-creation work is done in the IDDReanalysisAssay dialog class prior to reaching this point
break;
case ConstructedSource.CycleFile:
Integ.BuildMeasurementMinimal(ap, det, mo); // the measurement is reconstructed before each test data file processing, so this is meant as a carrier for certain kick-off values
NC.App.AppContext.TestDataFileAssay = true;
UIIntegration.Controller.file = true;
dr = UIIntegration.GetUsersFile("Select a test data (disk) file", NC.App.AppContext.FileInput, "INCC5 Test data (disk)", "dat", "cnn");
break;
case ConstructedSource.ReviewFile:
Integ.BuildMeasurementMinimal(ap, det, mo); // acquire type and measurement option are read from each NCC file itself, so this instance is an acquire state kick-off carrier value
NC.App.AppContext.ReviewFileAssay = true;
UIIntegration.Controller.file = true;
dr = UIIntegration.GetUsersFile("Select an NCC file", NC.App.AppContext.FileInput, "INCC5 Review", "NCC");
break;
case ConstructedSource.NCDFile:
Integ.BuildMeasurement(ap, det, mo);
NC.App.AppContext.NCDFileAssay = true;
UIIntegration.Controller.file = true;
if (det.ListMode || NC.App.Opstate.Measurement.MeasOption.IsListMode())
{
dr = (new LMAcquire(ap, det, fromINCC5Acq: true)).ShowDialog(); // show LM-relevant acquire-style settings for modification or confirmation
}
else
{
dr = UIIntegration.GetUsersFilesFolder("Select NCD files or folder", NC.App.AppContext.FileInput, "LMMM NCD", "ncd");
}
break;
case ConstructedSource.SortedPulseTextFile:
Integ.BuildMeasurement(ap, det, mo);
NC.App.AppContext.PulseFileAssay = true;
UIIntegration.Controller.file = true;
if (det.ListMode || NC.App.Opstate.Measurement.MeasOption.IsListMode())
{
dr = (new LMAcquire(ap, det, fromINCC5Acq: true)).ShowDialog(); // show LM-relevant acquire-style settings for modification or confirmation
}
else
{
dr = UIIntegration.GetUsersFilesFolder("Select pulse files or folder", NC.App.AppContext.FileInput, "pulse", "txt");
}
break;
case ConstructedSource.PTRFile:
Integ.BuildMeasurement(ap, det, mo);
NC.App.AppContext.PTRFileAssay = true;
UIIntegration.Controller.file = true;
if (det.ListMode || NC.App.Opstate.Measurement.MeasOption.IsListMode())
{
dr = (new LMAcquire(ap, det, fromINCC5Acq: true)).ShowDialog(); // show LM-relevant acquire-style settings for modification or confirmation
}
else
{
dr = UIIntegration.GetUsersFilesFolder("Select PTR-32 files or folder", NC.App.AppContext.FileInput, "PTR-32", "bin", "chn");
}
break;
case ConstructedSource.MCA527File:
Integ.BuildMeasurement(ap, det, mo);
NC.App.AppContext.MCA527FileAssay = true;
UIIntegration.Controller.file = true;
if (det.ListMode || NC.App.Opstate.Measurement.MeasOption.IsListMode())
{
dr = (new LMAcquire(ap, det, fromINCC5Acq: true)).ShowDialog(); // show LM-relevant acquire-style settings for modification or confirmation
}
else
{
dr = UIIntegration.GetUsersFilesFolder("Select MCA files or folder", NC.App.AppContext.FileInput, "MCA527", "mca");
}
break;
default:
break;
}
return(dr);
}
//// BUTTONCLICK HANDLERS ///////////////////////////////////////////////
public DialogResult OKButton_Click(object sender, EventArgs e)
{
DialogResult dr = DialogResult.Cancel;
if (ap.modified)
{
INCCDB.AcquireSelector sel = new INCCDB.AcquireSelector(det, ap.item_type, DateTime.Now);
ap.MeasDateTime = sel.TimeStamp; ap.lm.TimeStamp = sel.TimeStamp;
NC.App.DB.AcquireParametersMap().Add(sel, ap); // it's a new one, not the existing one modified
NC.App.DB.UpdateAcquireParams(ap, det.ListMode);
}
// The acquire is set to occur, build up the measurement state
AnalysisWizard.ResetMeasurement();
Integ.BuildMeasurement(ap, det, mo);
switch (ap.data_src)
{
case ConstructedSource.Live: // set up the instrument list for the action controller
UIIntegration.Controller.file = false; // make sure to use the DAQ controller, not the file controller
NC.App.AppContext.FileInput = null; // reset the cmd line file input flag
if (det.ListMode)
{
// patch override lm.Interval with run_count_time from dialog
NC.App.Opstate.Measurement.AcquireState.lm.Interval = NC.App.Opstate.Measurement.AcquireState.run_count_time;
// Check NC.App.Opstate.Measurement.AnalysisParams for at least one VSR
// If not present, inform and pop up the wizard
// If present, inform with new dialog, do not pop up the wizard
if (NC.App.Opstate.Measurement.AnalysisParams.HasMultiplicity())
{
dr = DialogResult.OK;
}
else
{
AnalysisWizard awl = new AnalysisWizard(AnalysisWizard.AWSteps.Step2B, ap, det); // analyzers are created in here, placed on global measurement
dr = awl.ShowDialog();
if (dr == DialogResult.OK)
{
NC.App.DB.UpdateAcquireParams(ap); //update it again
NC.App.DB.UpdateDetector(det);
}
}
if (dr == DialogResult.OK)
{
// if ok, the analyzers are set up, so can kick it off now.
UIIntegration.Controller.ActivateDetector(det);
}
}
else
{
SRInstrument sri = new SRInstrument(det);
sri.selected = true;
sri.Init(NC.App.Loggers.Logger(LMLoggers.AppSection.Data), NC.App.Loggers.Logger(LMLoggers.AppSection.Analysis));
if (!Instruments.All.Contains(sri))
{
Instruments.All.Add(sri); // add to global runtime list
}
dr = DialogResult.OK;
}
break;
case ConstructedSource.DB:
NC.App.AppContext.DBDataAssay = true;
UIIntegration.Controller.file = true;
IDDAcquireDBMeas dbdlg = new IDDAcquireDBMeas(this);
if (dbdlg.HasItems())
{
dr = dbdlg.ShowDialog();
if (dr == DialogResult.OK)
{
DateTimeOffset dto = dbdlg.measurementId.MeasDateTime;
DateTimeOffset cur = new DateTimeOffset(dto.Ticks, dto.Offset);
NC.App.Logger(NCCReporter.LMLoggers.AppSection.App).TraceEvent(NCCReporter.LogLevels.Info, 87654,
"Using " + dto.ToString("MMM dd yyy HH:mm:ss.ff K"));
// get the cycles for the selected measurement from the database, and add them to the current measurement
CycleList cl = NC.App.DB.GetCycles(det, dbdlg.measurementId);
foreach (Cycle cycle in cl) // add the necessary meta-data to the cycle identifier instance
{
cycle.UpdateDataSourceId(ap.data_src, det.Id.SRType,
cur.AddTicks(cycle.TS.Ticks), det.Id.FileName);
cur = cycle.DataSourceId.dt;
}
NC.App.Opstate.Measurement.Add(cl);
// TODO: for Reanalysis, a full reconstruction of the measurement state based on the ResultsRec state and the method parameter map contents (for Calib and Verif)
}
}
else
{
MessageBox.Show("No items found in database matching these parameters", "WARNING");
}
break;
case ConstructedSource.Manual:
UIIntegration.Controller.file = true;
NC.App.AppContext.DBDataAssay = true;
IDDManualDataEntry mdlg = new IDDManualDataEntry();
mdlg.AH = this;
dr = mdlg.ShowDialog();
if (dr == DialogResult.OK)
{
// the work is done in the dialog class
}
break;
case ConstructedSource.CycleFile:
NC.App.AppContext.TestDataFileAssay = true;
UIIntegration.Controller.file = true;
dr = UIIntegration.GetUsersFile("Select a test data (disk) file", NC.App.AppContext.FileInput, "INCC5 Test data (disk)", "dat");
break;
case ConstructedSource.ReviewFile:
NC.App.AppContext.ReviewFileAssay = true;
UIIntegration.Controller.file = true;
dr = UIIntegration.GetUsersFile("Select an NCC file", NC.App.AppContext.FileInput, "INCC5 Review", "NCC");
break;
case ConstructedSource.NCDFile:
NC.App.AppContext.NCDFileAssay = true;
UIIntegration.Controller.file = true;
if (NC.App.Opstate.Measurement.MeasOption == AssaySelector.MeasurementOption.unspecified)
{
AnalysisWizard aw = new AnalysisWizard(AnalysisWizard.AWSteps.Step2A, ap, det);
dr = aw.ShowDialog(); // show LM-relevant acquire-style settings for modification or confirmation
}
else
{
dr = UIIntegration.GetUsersFilesFolder("Select NCD files or folder", NC.App.AppContext.FileInput, "LMMM NCD", "ncd");
}
break;
case ConstructedSource.SortedPulseTextFile:
NC.App.AppContext.PulseFileAssay = true;
UIIntegration.Controller.file = true;
if (NC.App.Opstate.Measurement.MeasOption == AssaySelector.MeasurementOption.unspecified)
{
AnalysisWizard aw1 = new AnalysisWizard(AnalysisWizard.AWSteps.Step2A, ap, det);
dr = aw1.ShowDialog(); // show LM-relevant acquire-style settings for modification or confirmation
}
else
{
dr = UIIntegration.GetUsersFilesFolder("Select pulse files or folder", NC.App.AppContext.FileInput, "pulse", "txt");
}
break;
case ConstructedSource.PTRFile:
NC.App.AppContext.PTRFileAssay = true;
UIIntegration.Controller.file = true;
if (NC.App.Opstate.Measurement.MeasOption == AssaySelector.MeasurementOption.unspecified)
{
AnalysisWizard aw2 = new AnalysisWizard(AnalysisWizard.AWSteps.Step2A, ap, det);
dr = aw2.ShowDialog(); // show LM-relevant acquire-style settings for modification or confirmation
}
else
{
dr = UIIntegration.GetUsersFilesFolder("Select PTR-32 files or folder", NC.App.AppContext.FileInput, "PTR-32", "bin", "chn");
}
break;
case ConstructedSource.NILAFile:
NC.App.AppContext.NILAFileAssay = true;
UIIntegration.Controller.file = true;
dr = UIIntegration.GetUsersFilesFolder("Select NILA files or folder", NC.App.AppContext.FileInput, "MTS NILA", "dat");
//dr = DialogResult.Cancel;
break;
default:
break;
}
return(dr);
}
//// BUTTONCLICK HANDLERS ///////////////////////////////////////////////
public DialogResult OKButton_Click(object sender, EventArgs e)
{
DialogResult dr = DialogResult.Cancel;
if (ap.modified)
{
INCCDB.AcquireSelector sel = new INCCDB.AcquireSelector(det, ap.item_type, DateTime.Now);
ap.MeasDateTime = sel.TimeStamp; ap.lm.TimeStamp = sel.TimeStamp;
NC.App.DB.AddAcquireParams(sel, ap); // it's a new one, not the existing one modified
}
// The acquire is set to occur
if (ap.data_src != ConstructedSource.Reanalysis) // Reanalysis is a bit backwards, the correct measurement is fully constructed before this point
LMAcquire.ResetMeasurement();
switch (ap.data_src)
{
case ConstructedSource.Live: // set up the instrument list for the action controller
Integ.BuildMeasurement(ap, det, mo);
UIIntegration.Controller.file = false; // make sure to use the DAQ controller, not the file controller
NC.App.AppContext.FileInput = null; // reset the cmd line file input flag
if (det.ListMode)
{
// patch override lm.Interval with run_count_time from dialog
// the acquire dialogs field values, as seen and modified by the user, override the LM-only acquire settings for virtual SR measurements
NC.App.Opstate.Measurement.AcquireState.lm.Interval = NC.App.Opstate.Measurement.AcquireState.run_count_time;
NC.App.Opstate.Measurement.AcquireState.lm.Cycles = NC.App.Opstate.Measurement.AcquireState.num_runs;
// Check NC.App.Opstate.Measurement.AnalysisParams for at least one VSR
// If not present, inform and pop up the wizard
// If present, inform with new dialog, do not pop up the wizard
if (NC.App.Opstate.Measurement.AnalysisParams.HasMatchingVSR(det.MultiplicityParams))
{
dr = DialogResult.OK;
}
else
{
dr = (new LMAcquire(ap, det, fromINCC5Acq: true)).ShowDialog();// analyzers are created in here, placed on global measurement
if (dr == DialogResult.OK)
{
NC.App.DB.UpdateAcquireParams(ap); //update it again
NC.App.DB.UpdateDetector(det);
}
}
if (dr == DialogResult.OK)
{
// if ok, the analyzers are set up, so can kick it off now.
UIIntegration.Controller.ActivateDetector(det);
}
}
else
{
SRInstrument sri = new SRInstrument(det);
sri.selected = true;
sri.Init(NC.App.Loggers.Logger(LMLoggers.AppSection.Data), NC.App.Loggers.Logger(LMLoggers.AppSection.Analysis));
if (!Instruments.All.Contains(sri))
Instruments.All.Add(sri); // add to global runtime list
dr = DialogResult.OK;
}
break;
case ConstructedSource.DB:
NC.App.AppContext.DBDataAssay = true;
UIIntegration.Controller.file = true;
IDDAcquireDBMeas dbdlg = new IDDAcquireDBMeas(this);
if (dbdlg.HasItems())
{
dr = dbdlg.ShowDialog();
if (dr == DialogResult.OK)
{
Integ.BuildMeasurement(ap, det, mo);
DateTimeOffset dto = dbdlg.measurementId.MeasDateTime;
NC.App.Logger(LMLoggers.AppSection.App).TraceEvent(LogLevels.Info, 87654,
"Using " + dto.ToString("MMM dd yyy HH:mm:ss.ff K"));
NC.App.Opstate.Measurement.MeasDate = dto;
// get the cycles for the selected measurement from the database, and add them to the current measurement
CycleList cl = NC.App.DB.GetCycles(det, dbdlg.measurementId, ap.data_src); // APluralityOfMultiplicityAnalyzers: // URGENT: get all the cycles associated with each analyzer, restoring into the correct key->result pair
NC.App.Opstate.Measurement.Add(cl);
// use the cycle time interval as found in the data, taking the first entry because equal intervals are assumed
if (cl.Count > 0)
NC.App.Opstate.Measurement.AcquireState.lm.Interval = NC.App.Opstate.Measurement.AcquireState.run_count_time
= cl[0].TS.TotalSeconds;
NC.App.DB.UpdateAcquireParams(ap); //update it again
}
}
else
MessageBox.Show("No items found in database matching these parameters", "WARNING");
break;
case ConstructedSource.Manual:
UIIntegration.Controller.file = true;
NC.App.AppContext.DBDataAssay = true;
IDDManualDataEntry mdlg = new IDDManualDataEntry();
mdlg.AH = this;
dr = mdlg.ShowDialog(); // the work constructing the measurement is done in the dialog class
break;
case ConstructedSource.Reanalysis:
UIIntegration.Controller.file = true;
NC.App.AppContext.DBDataAssay = true;
dr = DialogResult.OK;
// the measurement re-creation work is done in the IDDReanalysisAssay dialog class prior to reaching this point
break;
case ConstructedSource.CycleFile:
Integ.BuildMeasurementMinimal(ap, det, mo); // the measurement is reconstructed before each test data file processing, so this is meant as a carrier for certain kick-off values
NC.App.AppContext.TestDataFileAssay = true;
UIIntegration.Controller.file = true;
dr = UIIntegration.GetUsersFile("Select a test data (disk) file", NC.App.AppContext.FileInput, "INCC5 Test data (disk)", "dat", "cnn");
break;
case ConstructedSource.ReviewFile:
Integ.BuildMeasurementMinimal(ap, det, mo); // acquire type and measurement option are read from each NCC file itself, so this instance is an acquire state kick-off carrier value
NC.App.AppContext.ReviewFileAssay = true;
UIIntegration.Controller.file = true;
dr = UIIntegration.GetUsersFile("Select an NCC file", NC.App.AppContext.FileInput, "INCC5 Review", "NCC");
break;
case ConstructedSource.NCDFile:
Integ.BuildMeasurement(ap, det, mo);
NC.App.AppContext.NCDFileAssay = true;
UIIntegration.Controller.file = true;
if (det.ListMode || NC.App.Opstate.Measurement.MeasOption.IsListMode())
{
dr = (new LMAcquire(ap, det, fromINCC5Acq: true)).ShowDialog(); // show LM-relevant acquire-style settings for modification or confirmation
}
else
{
dr = UIIntegration.GetUsersFilesFolder("Select NCD files or folder", NC.App.AppContext.FileInput, "LMMM NCD", "ncd");
}
break;
case ConstructedSource.SortedPulseTextFile:
Integ.BuildMeasurement(ap, det, mo);
NC.App.AppContext.PulseFileAssay = true;
UIIntegration.Controller.file = true;
if (det.ListMode || NC.App.Opstate.Measurement.MeasOption.IsListMode())
{
dr = (new LMAcquire(ap, det, fromINCC5Acq: true)).ShowDialog(); // show LM-relevant acquire-style settings for modification or confirmation
}
else
{
dr = UIIntegration.GetUsersFilesFolder("Select pulse files or folder", NC.App.AppContext.FileInput, "pulse", "txt");
}
break;
case ConstructedSource.PTRFile:
Integ.BuildMeasurement(ap, det, mo);
NC.App.AppContext.PTRFileAssay = true;
UIIntegration.Controller.file = true;
if (det.ListMode || NC.App.Opstate.Measurement.MeasOption.IsListMode())
{
dr = (new LMAcquire(ap, det, fromINCC5Acq: true)).ShowDialog(); // show LM-relevant acquire-style settings for modification or confirmation
}
else
{
dr = UIIntegration.GetUsersFilesFolder("Select PTR-32 files or folder", NC.App.AppContext.FileInput, "PTR-32", "bin", "chn");
}
break;
case ConstructedSource.MCA527File:
Integ.BuildMeasurement(ap, det, mo);
NC.App.AppContext.MCA527FileAssay = true;
UIIntegration.Controller.file = true;
if (det.ListMode || NC.App.Opstate.Measurement.MeasOption.IsListMode())
{
dr = (new LMAcquire(ap, det, fromINCC5Acq: true)).ShowDialog(); // show LM-relevant acquire-style settings for modification or confirmation
}
else
{
dr = UIIntegration.GetUsersFilesFolder("Select MCA files or folder", NC.App.AppContext.FileInput, "MCA527", "mca");
}
break;
default:
break;
}
return dr;
}
//// BUTTONCLICK HANDLERS ///////////////////////////////////////////////
public DialogResult OKButton_Click(object sender, EventArgs e)
{
DialogResult dr = DialogResult.Cancel;
if (ap.modified)
{
INCCDB.AcquireSelector sel = new INCCDB.AcquireSelector(det, ap.item_type, DateTime.Now);
ap.MeasDateTime = sel.TimeStamp; ap.lm.TimeStamp = sel.TimeStamp;
NC.App.DB.AcquireParametersMap().Add(sel, ap); // it's a new one, not the existing one modified
NC.App.DB.UpdateAcquireParams(ap, det.ListMode);
}
// The acquire is set to occur, build up the measurement state
AnalysisWizard.ResetMeasurement();
Integ.BuildMeasurement(ap, det, mo);
switch (ap.data_src)
{
case ConstructedSource.Live: // set up the instrument list for the action controller
UIIntegration.Controller.file = false; // make sure to use the DAQ controller, not the file controller
NC.App.AppContext.FileInput = null; // reset the cmd line file input flag
if (det.ListMode)
{
// patch override lm.Interval with run_count_time from dialog
NC.App.Opstate.Measurement.AcquireState.lm.Interval = NC.App.Opstate.Measurement.AcquireState.run_count_time;
// Check NC.App.Opstate.Measurement.AnalysisParams for at least one VSR
// If not present, inform and pop up the wizard
// If present, inform with new dialog, do not pop up the wizard
if (NC.App.Opstate.Measurement.AnalysisParams.HasMultiplicity())
{
dr = DialogResult.OK;
}
else
{
AnalysisWizard awl = new AnalysisWizard(AnalysisWizard.AWSteps.Step2B, ap, det); // analyzers are created in here, placed on global measurement
dr = awl.ShowDialog();
if (dr == DialogResult.OK)
{
NC.App.DB.UpdateAcquireParams(ap); //update it again
NC.App.DB.UpdateDetector(det);
}
}
if (dr == DialogResult.OK)
{
// if ok, the analyzers are set up, so can kick it off now.
UIIntegration.Controller.ActivateDetector(det);
}
}
else
{
SRInstrument sri = new SRInstrument(det);
sri.selected = true;
sri.Init(NC.App.Loggers.Logger(LMLoggers.AppSection.Data), NC.App.Loggers.Logger(LMLoggers.AppSection.Analysis));
if (!Instruments.All.Contains(sri))
Instruments.All.Add(sri); // add to global runtime list
dr = DialogResult.OK;
}
break;
case ConstructedSource.DB:
NC.App.AppContext.DBDataAssay = true;
UIIntegration.Controller.file = true;
IDDAcquireDBMeas dbdlg = new IDDAcquireDBMeas(this);
if (dbdlg.HasItems())
{
dr = dbdlg.ShowDialog();
if (dr == DialogResult.OK)
{
DateTimeOffset dto = dbdlg.measurementId.MeasDateTime;
DateTimeOffset cur = new DateTimeOffset(dto.Ticks, dto.Offset);
NC.App.Logger(NCCReporter.LMLoggers.AppSection.App).TraceEvent(NCCReporter.LogLevels.Info, 87654,
"Using " + dto.ToString("MMM dd yyy HH:mm:ss.ff K"));
// get the cycles for the selected measurement from the database, and add them to the current measurement
CycleList cl = NC.App.DB.GetCycles(det, dbdlg.measurementId);
foreach(Cycle cycle in cl) // add the necessary meta-data to the cycle identifier instance
{
cycle.UpdateDataSourceId(ap.data_src, det.Id.SRType,
cur.AddTicks(cycle.TS.Ticks), det.Id.FileName);
cur = cycle.DataSourceId.dt;
}
NC.App.Opstate.Measurement.Add(cl);
// TODO: for Reanalysis, a full reconstruction of the measurement state based on the ResultsRec state and the method parameter map contents (for Calib and Verif)
}
}
else
MessageBox.Show("No items found in database matching these parameters", "WARNING");
break;
case ConstructedSource.Manual:
UIIntegration.Controller.file = true;
NC.App.AppContext.DBDataAssay = true;
IDDManualDataEntry mdlg = new IDDManualDataEntry();
mdlg.AH = this;
dr = mdlg.ShowDialog();
if (dr == DialogResult.OK)
{
// the work is done in the dialog class
}
break;
case ConstructedSource.CycleFile:
NC.App.AppContext.TestDataFileAssay = true;
UIIntegration.Controller.file = true;
dr = UIIntegration.GetUsersFile("Select a test data (disk) file", NC.App.AppContext.FileInput, "INCC5 Test data (disk)", "dat");
break;
case ConstructedSource.ReviewFile:
NC.App.AppContext.ReviewFileAssay = true;
UIIntegration.Controller.file = true;
dr = UIIntegration.GetUsersFile("Select an NCC file", NC.App.AppContext.FileInput, "INCC5 Review", "NCC");
break;
case ConstructedSource.NCDFile:
NC.App.AppContext.NCDFileAssay = true;
UIIntegration.Controller.file = true;
if (NC.App.Opstate.Measurement.MeasOption == AssaySelector.MeasurementOption.unspecified)
{
AnalysisWizard aw = new AnalysisWizard(AnalysisWizard.AWSteps.Step2A, ap, det);
dr = aw.ShowDialog(); // show LM-relevant acquire-style settings for modification or confirmation
}
else
{
dr = UIIntegration.GetUsersFilesFolder("Select NCD files or folder", NC.App.AppContext.FileInput, "LMMM NCD", "ncd");
}
break;
case ConstructedSource.SortedPulseTextFile:
NC.App.AppContext.PulseFileAssay = true;
UIIntegration.Controller.file = true;
if (NC.App.Opstate.Measurement.MeasOption == AssaySelector.MeasurementOption.unspecified)
{
AnalysisWizard aw1 = new AnalysisWizard(AnalysisWizard.AWSteps.Step2A, ap, det);
dr = aw1.ShowDialog(); // show LM-relevant acquire-style settings for modification or confirmation
}
else
{
dr = UIIntegration.GetUsersFilesFolder("Select pulse files or folder", NC.App.AppContext.FileInput, "pulse", "txt");
}
break;
case ConstructedSource.PTRFile:
NC.App.AppContext.PTRFileAssay = true;
UIIntegration.Controller.file = true;
if (NC.App.Opstate.Measurement.MeasOption == AssaySelector.MeasurementOption.unspecified)
{
AnalysisWizard aw2 = new AnalysisWizard(AnalysisWizard.AWSteps.Step2A, ap, det);
dr = aw2.ShowDialog(); // show LM-relevant acquire-style settings for modification or confirmation
}
else
{
dr = UIIntegration.GetUsersFilesFolder("Select PTR-32 files or folder", NC.App.AppContext.FileInput, "PTR-32", "bin", "chn");
}
break;
case ConstructedSource.NILAFile:
NC.App.AppContext.NILAFileAssay = true;
UIIntegration.Controller.file = true;
dr = UIIntegration.GetUsersFilesFolder("Select NILA files or folder", NC.App.AppContext.FileInput, "MTS NILA", "dat");
//dr = DialogResult.Cancel;
break;
default:
break;
}
return dr;
}