public static void Main(string[] args)
{
// NOTE: To disable debug output uncomment the following two lines
//LogManager.Configuration.LoggingRules.RemoveAt(0);
//LogManager.Configuration.Reload();
Console.WriteLine("XTenLib test program, waiting for connection.");
var x10 = new XTenManager();
// Listen to XTenManager events
x10.ConnectionStatusChanged += X10_ConnectionStatusChanged;
x10.ModuleChanged += X10_ModuleChanged;
x10.PlcAddressReceived += X10_PlcAddressReceived;
x10.PlcFunctionReceived += X10_PlcFunctionReceived;
// These RF events are only used for CM15
x10.RfDataReceived += X10_RfDataReceived;
x10.RfCommandReceived += X10_RfCommandReceived;
x10.RfSecurityReceived += X10_RfSecurityReceived;
// Setup X10 interface. For CM15 set PortName = "USB"; for CM11 use serial port path intead (eg. "COM7" or "/dev/ttyUSB0")
x10.PortName = "USB";
x10.HouseCode = "A,C";
// Connect to the interface
x10.Connect();
// Sends A1 ON / OFF via RF
Thread.Sleep(1000);
x10.SendMessage(new byte[] { 0xEB, 0x20, 0x60, 0x9F, 0x00, 0xFF });
Thread.Sleep(1000);
x10.SendMessage(new byte[] { 0xEB, 0x20, 0x60, 0x9F, 0x20, 0xDF });
// Prevent the program from quitting with a noop loop
while (true)
{
Thread.Sleep(1000);
}
}
public object InterfaceControl(MigInterfaceCommand request)
{
var response = new ResponseText("OK");
string nodeId = lastAddressedModule = request.Address;
string option = request.GetOption(0);
Commands command;
Enum.TryParse <Commands>(request.Command.Replace(".", "_"), out command);
if (portName == Cm19LibDriverPort)
{
// Parse house/unit
var houseCode = CM19Lib.Utility.HouseCodeFromString(nodeId);
var unitCode = CM19Lib.Utility.UnitCodeFromString(nodeId);
var module = GetSecurityModuleByAddress(nodeId, ModuleTypes.Switch);
// module.CustomData is used to store the current level
switch (command)
{
case Commands.Control_On:
cm19Lib.UnitOn(houseCode, unitCode);
module.CustomData = 1D;
UpdateModuleLevel(module);
break;
case Commands.Control_Off:
cm19Lib.UnitOff(houseCode, unitCode);
module.CustomData = 0D;
UpdateModuleLevel(module);
break;
case Commands.Control_Bright:
cm19Lib.Bright(houseCode);
module.CustomData = module.CustomData + (5 / 100D);
if (module.CustomData > 1)
{
module.CustomData = 1D;
}
UpdateModuleLevel(module);
break;
case Commands.Control_Dim:
cm19Lib.Dim(houseCode);
module.CustomData = module.CustomData - (5 / 100D);
if (module.CustomData < 0)
{
module.CustomData = 0D;
}
UpdateModuleLevel(module);
break;
case Commands.Control_Level:
int dimValue = (int.Parse(option) - (int)(module.CustomData * 100.0)) / 5;
if (dimValue > 0)
{
cm19Lib.Bright(houseCode);
for (int i = 0; i < (dimValue / Cm19Manager.SendRepeatCount); i++)
{
cm19Lib.Bright(houseCode);
}
}
else if (dimValue < 0)
{
cm19Lib.Dim(houseCode);
for (int i = 0; i < -(dimValue / Cm19Manager.SendRepeatCount); i++)
{
cm19Lib.Dim(houseCode);
}
}
module.CustomData = module.CustomData + (dimValue * 5 / 100D);
UpdateModuleLevel(module);
break;
case Commands.Control_Toggle:
if (module.CustomData == 0D)
{
cm19Lib.UnitOn(houseCode, unitCode);
UpdateModuleLevel(module);
}
else
{
cm19Lib.UnitOff(houseCode, unitCode);
UpdateModuleLevel(module);
}
break;
case Commands.Control_AllLightsOn:
cm19Lib.AllLightsOn(houseCode);
// TODO: update modules status
break;
case Commands.Control_AllUnitsOff:
cm19Lib.AllUnitsOff(houseCode);
// TODO: update modules status
break;
case Commands.Control_RfSend:
byte[] data = CM19Lib.Utility.StringToByteArray(option.Replace(" ", ""));
cm19Lib.SendMessage(data);
break;
}
}
else
{
// Parse house/unit
var houseCode = XTenLib.Utility.HouseCodeFromString(nodeId);
var unitCode = XTenLib.Utility.UnitCodeFromString(nodeId);
switch (command)
{
case Commands.Parameter_Status:
x10Lib.StatusRequest(houseCode, unitCode);
break;
case Commands.Control_On:
x10Lib.UnitOn(houseCode, unitCode);
break;
case Commands.Control_Off:
x10Lib.UnitOff(houseCode, unitCode);
break;
case Commands.Control_Bright:
x10Lib.Bright(houseCode, unitCode, int.Parse(option));
break;
case Commands.Control_Dim:
x10Lib.Dim(houseCode, unitCode, int.Parse(option));
break;
case Commands.Control_Level_Adjust:
//int adjvalue = int.Parse(option);
//x10Lib.Modules[nodeId].Level = ((double)adjvalue/100D);
OnInterfacePropertyChanged(this.GetDomain(), nodeId, "X10 Module", ModuleEvents.Status_Level, x10Lib.Modules[nodeId].Level);
throw(new NotImplementedException("X10 CONTROL_LEVEL_ADJUST Not Implemented"));
break;
case Commands.Control_Level:
int dimvalue = int.Parse(option) - (int)(x10Lib.Modules[nodeId].Level * 100.0);
if (dimvalue > 0)
{
x10Lib.Bright(houseCode, unitCode, dimvalue);
}
else if (dimvalue < 0)
{
x10Lib.Dim(houseCode, unitCode, -dimvalue);
}
break;
case Commands.Control_Toggle:
string huc = XTenLib.Utility.HouseUnitCodeFromEnum(houseCode, unitCode);
if (x10Lib.Modules[huc].Level == 0)
{
x10Lib.UnitOn(houseCode, unitCode);
}
else
{
x10Lib.UnitOff(houseCode, unitCode);
}
break;
case Commands.Control_AllLightsOn:
x10Lib.AllLightsOn(houseCode);
break;
case Commands.Control_AllUnitsOff:
x10Lib.AllUnitsOff(houseCode);
break;
case Commands.Control_RfSend:
byte[] data = CM19Lib.Utility.StringToByteArray("EB" + option.Replace(" ", ""));
// SendRepeatCount is not implemented in XTenLib, so a for loop in required here
for (int i = 0; i < Cm19Manager.SendRepeatCount; i++)
{
x10Lib.SendMessage(data);
Thread.Sleep(Cm19Manager.SendPauseMs);
}
break;
}
}
return(response);
}
