public void ShouldReportErrorWhenInvalidOrganizationNumbersAreFound()
        {
            AddmlFieldDefinition fieldDefinition = new AddmlFieldDefinitionBuilder()
                                                   .Build();
            FlatFile flatFile = new FlatFile(fieldDefinition.GetAddmlFlatFileDefinition());

            ControlOrganizationNumber test = new ControlOrganizationNumber();

            test.Run(flatFile);
            test.Run(new Field(fieldDefinition, "914994780")); // ok
            test.Run(new Field(fieldDefinition, "914994781")); // invalid checksum
            test.Run(new Field(fieldDefinition, "91499478"));  // invalid length
            test.Run(new Field(fieldDefinition, "91499478A")); // invalid characters
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(3);
            testRun.Results[0].Location.ToString().Should().Be(fieldDefinition.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("Ugyldig organisasjonsnummer: 914994781");
            testRun.Results[1].Location.ToString().Should().Be(fieldDefinition.GetIndex().ToString());
            testRun.Results[1].Message.Should().Be("Ugyldig organisasjonsnummer: 91499478");
            testRun.Results[2].Location.ToString().Should().Be(fieldDefinition.GetIndex().ToString());
            testRun.Results[2].Message.Should().Be("Ugyldig organisasjonsnummer: 91499478A");
        }
        public void ShouldReportValuesShorterThanMinLength()
        {
            AddmlFieldDefinition fieldDefinition = new AddmlFieldDefinitionBuilder()
                                                   .WithMaxLength(3)
                                                   .Build();

            FlatFile flatFile = new FlatFile(fieldDefinition.GetAddmlFlatFileDefinition());

            A_18_ControlMaxLength test = new A_18_ControlMaxLength();

            test.Run(flatFile);
            test.Run(new Field(fieldDefinition, ""));
            test.Run(new Field(fieldDefinition, "1"));
            test.Run(new Field(fieldDefinition, "12"));
            test.Run(new Field(fieldDefinition, "123"));
            test.Run(new Field(fieldDefinition, "1234"));
            test.Run(new Field(fieldDefinition, "1234"));
            test.Run(new Field(fieldDefinition, "12345"));
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(1);
            testRun.Results[0].Location.ToString().Should().Be(fieldDefinition.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("Verdier lengre enn maksimumlengde: 1234 12345");
        }
Esempio n. 3
0
        public void ShouldReportIncorrectDateDataFormat()
        {
            AddmlFieldDefinition fieldDefinition1 = new AddmlFieldDefinitionBuilder()
                                                    .WithDataType(new DateDataType("dd.MM.yyyyTHH:mm:sszzz", null))
                                                    .Build();

            FlatFile flatFile = new FlatFile(fieldDefinition1.GetAddmlFlatFileDefinition());

            ControlDataFormat test = new ControlDataFormat();

            test.Run(flatFile);
            test.Run(new Field(fieldDefinition1, ""));
            test.Run(new Field(fieldDefinition1, "18.11.2016T08:43:00+00:00")); // ok
            test.Run(new Field(fieldDefinition1, "notadate"));
            test.Run(new Field(fieldDefinition1, "40.11.2016T08:43:00+00:00"));
            test.Run(new Field(fieldDefinition1, "18.11.2016"));
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(1);
            testRun.Results[0].Location.ToString().Should().Be(fieldDefinition1.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("Ugyldig dataformat: '', 'notadate', '40.11.2016T08:43:00+00:00', '18.11.2016'");
        }
Esempio n. 4
0
        public void ShouldFindNullValues()
        {
            List <string> nullValues = new List <string> {
                "null", "<null>"
            };
            AddmlFieldDefinition fieldDefinition = new AddmlFieldDefinitionBuilder()
                                                   .WithDataType(new StringDataType(null, nullValues))
                                                   .Build();
            FlatFile flatFile = new FlatFile(fieldDefinition.GetAddmlFlatFileDefinition());

            AnalyseCountNull test = new AnalyseCountNull();

            test.Run(flatFile);
            test.Run(new Field(fieldDefinition, "1"));
            test.Run(new Field(fieldDefinition, "null"));
            test.Run(new Field(fieldDefinition, "nulll"));
            test.Run(new Field(fieldDefinition, "2"));
            test.Run(new Field(fieldDefinition, "<null>"));
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeTrue();
            testRun.Results.Count.Should().Be(1);
            testRun.Results[0].Location.ToString().Should().Be(fieldDefinition.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("2 forekomster av null");
        }
        public void ShouldReportInvalidChecksumValue()
        {
            string expectedSha256Hash = "3b67b886241a7d63798ea0e63a70cbca6c2109ab3962b2a5815cbadcb90cbb08".ToUpper();

            AddmlFlatFileDefinition flatFileDefinition = new AddmlFlatFileDefinitionBuilder()
                                                         .WithChecksum(new Checksum("SHA-256", "invalid"))
                                                         .WithFileInfo(new FileInfo(TestUtil.TestDataDirectory + "checksum.txt"))
                                                         .Build();

            FlatFile flatFile = new FlatFile(flatFileDefinition);

            AH_01_ControlChecksum test = new AH_01_ControlChecksum();

            test.Run(flatFile);
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(1);
            testRun.Results[0].Location.ToString().Should().Be(flatFileDefinition.GetIndex().ToString());
            testRun.Results[0].Message.Should()
            .Contain("Forventet sjekksum: invalid").And
            .Contain("Aktuell sjekksum: " + expectedSha256Hash);
        }
Esempio n. 6
0
        public void ShouldReportIncorrectBooleanDataFormat()
        {
            AddmlFieldDefinition fieldDefinition1 = new AddmlFieldDefinitionBuilder()
                                                    .WithDataType(new BooleanDataType("Y/N", null))
                                                    .Build();
            AddmlFieldDefinition fieldDefinition2 = new AddmlFieldDefinitionBuilder()
                                                    .WithDataType(new BooleanDataType("Ja/Nei", null))
                                                    .Build();

            FlatFile flatFile = new FlatFile(fieldDefinition1.GetAddmlFlatFileDefinition());

            ControlDataFormat test = new ControlDataFormat();

            test.Run(flatFile);
            test.Run(new Field(fieldDefinition1, ""));
            test.Run(new Field(fieldDefinition1, "Y"));
            test.Run(new Field(fieldDefinition1, "N"));
            test.Run(new Field(fieldDefinition1, "Ja"));
            test.Run(new Field(fieldDefinition1, "Nei"));
            test.Run(new Field(fieldDefinition2, ""));
            test.Run(new Field(fieldDefinition2, "Y"));
            test.Run(new Field(fieldDefinition2, "N"));
            test.Run(new Field(fieldDefinition2, "Ja"));
            test.Run(new Field(fieldDefinition2, "Nei"));
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(2);
            testRun.Results[0].Location.ToString().Should().Be(fieldDefinition1.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("Ugyldig dataformat: '', 'Ja', 'Nei'");
            testRun.Results[1].Location.ToString().Should().Be(fieldDefinition2.GetIndex().ToString());
            testRun.Results[1].Message.Should().Be("Ugyldig dataformat: '', 'Y', 'N'");
        }
Esempio n. 7
0
        public void ShouldReportErrorWhenInvalidBirthNumbersAreFound()
        {
            AddmlFieldDefinition fieldDefinition = new AddmlFieldDefinitionBuilder()
                                                   .Build();
            FlatFile flatFile = new FlatFile(fieldDefinition.GetAddmlFlatFileDefinition());

            A_32_ControlBirthNumber test = new A_32_ControlBirthNumber();

            test.Run(flatFile);
            test.Run(new Field(fieldDefinition, "19089328341")); // ok
            test.Run(new Field(fieldDefinition, "19089328342")); // invalid checksum
            test.Run(new Field(fieldDefinition, "08011129480")); // ok
            test.Run(new Field(fieldDefinition, "08011129481")); // invalid checkum
            test.Run(new Field(fieldDefinition, "08063048608")); // ok
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(2);
            testRun.Results[0].Location.ToString().Should().Be(fieldDefinition.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("Ugyldig fødselsnummer: 19089328342");
            testRun.Results[1].Location.ToString().Should().Be(fieldDefinition.GetIndex().ToString());
            testRun.Results[1].Message.Should().Be("Ugyldig fødselsnummer: 08011129481");
        }
        public void ShouldReportNullValues()
        {
            List <string> nullValues = new List <string>
            {
                "null"
            };
            AddmlFieldDefinition fieldDefinition1 = new AddmlFieldDefinitionBuilder()
                                                    .WithDataType(new StringDataType(null, nullValues))
                                                    .Build();
            AddmlFieldDefinition fieldDefinition2 = new AddmlFieldDefinitionBuilder()
                                                    .WithDataType(new StringDataType(null, nullValues))
                                                    .Build();

            FlatFile flatFile = new FlatFile(fieldDefinition1.GetAddmlFlatFileDefinition());

            ControlNotNull test = new ControlNotNull();

            test.Run(flatFile);
            test.Run(new Field(fieldDefinition1, "A"));
            test.Run(new Field(fieldDefinition1, "null"));
            test.Run(new Field(fieldDefinition1, "B"));
            test.Run(new Field(fieldDefinition1, "C"));
            test.Run(new Field(fieldDefinition2, "A"));
            test.Run(new Field(fieldDefinition2, "B"));
            test.Run(new Field(fieldDefinition2, "C"));
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(1);
            testRun.Results[0].Location.ToString().Should().Be(fieldDefinition1.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("NULL-verdier finnes");
        }
Esempio n. 9
0
        public void ShouldOnlyShowSixErrorsPerFieldDefinition()
        {
            AddmlFieldDefinition fieldDefinition1 = new AddmlFieldDefinitionBuilder()
                                                    .WithDataType(new StringDataType("fnr", null))
                                                    .Build();

            FlatFile flatFile = new FlatFile(fieldDefinition1.GetAddmlFlatFileDefinition());

            ControlDataFormat test = new ControlDataFormat();

            test.Run(flatFile);
            test.Run(new Field(fieldDefinition1, "19980803")); // not ok
            test.Run(new Field(fieldDefinition1, "19990715")); // not ok
            test.Run(new Field(fieldDefinition1, "19880805")); // not ok
            test.Run(new Field(fieldDefinition1, "19890915")); // not ok
            test.Run(new Field(fieldDefinition1, "19990803")); // not ok
            test.Run(new Field(fieldDefinition1, "19880211")); // not ok
            test.Run(new Field(fieldDefinition1, "19890311")); // not ok, not shown
            test.Run(new Field(fieldDefinition1, "19890725")); // not ok, not shown
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(1);
            testRun.Results[0].Location.ToString().Should().Be(fieldDefinition1.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("Ugyldig dataformat: '19980803', '19990715', '19880805', '19890915', '19990803', '19880211' + 2 flere");
        }
Esempio n. 10
0
        public void ShouldReturnErrorWhenForeignKeyReferencesNonExistingPrimaryKeyValue()
        {
            var addmlFlatFileDefinition = new AddmlFlatFileDefinitionBuilder().Build();
            var recordDef = new AddmlRecordDefinitionBuilder()
                            .WithAddmlFlatFileDefinition(addmlFlatFileDefinition)
                            .Build();

            AddmlFieldDefinition primaryKeyFieldDef = recordDef.AddAddmlFieldDefinition("id", null, null, new IntegerDataType(), true, false,
                                                                                        null, null, null, null, null, true);
            var primaryKeyField = new Field(primaryKeyFieldDef, "1001");

            AddmlFieldDefinition foreignKeyFieldDef = new AddmlFieldDefinitionBuilder()
                                                      .WithForeignKey(primaryKeyFieldDef)
                                                      .Build();

            var foreignKeyField = new Field(foreignKeyFieldDef, "25");

            var controlForeignKey = new ControlForeignKey();

            controlForeignKey.Run(primaryKeyField);
            controlForeignKey.Run(foreignKeyField);

            controlForeignKey.EndOfFile();
            TestRun testRun = controlForeignKey.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(1);
        }
        public void ShouldReportIfRecordDefinitionIsNotInUse()
        {
            AddmlFlatFileDefinition fileDefinition        = new AddmlFlatFileDefinitionBuilder().Build();
            AddmlRecordDefinition   recordDefinitionInUse = new AddmlRecordDefinitionBuilder()
                                                            .WithAddmlFlatFileDefinition(fileDefinition)
                                                            .Build();
            AddmlRecordDefinition recordDefinitionNotInUse = new AddmlRecordDefinitionBuilder()
                                                             .WithAddmlFlatFileDefinition(fileDefinition)
                                                             .Build();
            AddmlFieldDefinition fieldDefinitionInUse = new AddmlFieldDefinitionBuilder()
                                                        .WithRecordDefinition(recordDefinitionInUse)
                                                        .Build();
            AddmlFieldDefinition fieldDefinitionNotInUse = new AddmlFieldDefinitionBuilder()
                                                           .WithRecordDefinition(recordDefinitionNotInUse)
                                                           .Build();
            FlatFile flatFile = new FlatFile(fileDefinition);

            A_14_ControlNotUsedRecordDef test = new A_14_ControlNotUsedRecordDef();

            test.Run(flatFile);
            test.Run(new Arkade.Core.Base.Addml.Record(recordDefinitionInUse, new List <Field> {
                new Field(fieldDefinitionInUse, "A"),
                new Field(fieldDefinitionInUse, "A"),
                new Field(fieldDefinitionInUse, "B")
            }));
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(1);
            testRun.Results[0].Location.ToString().Should().Be(recordDefinitionNotInUse.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("Posttypen er ikke i bruk");
        }
        public void ShouldCreateFrequencyList()
        {
            AddmlFieldDefinition fieldDefinition = new AddmlFieldDefinitionBuilder().Build();
            FlatFile             flatFile        = new FlatFile(fieldDefinition.GetAddmlFlatFileDefinition());

            AnalyseFrequenceList test = new AnalyseFrequenceList();

            test.Run(flatFile);
            test.Run(new Field(fieldDefinition, "A"));
            test.Run(new Field(fieldDefinition, "A"));
            test.Run(new Field(fieldDefinition, "B"));
            test.Run(new Field(fieldDefinition, "B"));
            test.Run(new Field(fieldDefinition, "B"));
            test.Run(new Field(fieldDefinition, "C"));
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeTrue();
            testRun.Results.Count.Should().Be(3);
            testRun.Results[0].Location.ToString().Should().Be(fieldDefinition.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("2 forekomster av A");
            testRun.Results[1].Location.ToString().Should().Be(fieldDefinition.GetIndex().ToString());
            testRun.Results[1].Message.Should().Be("3 forekomster av B");
            testRun.Results[2].Location.ToString().Should().Be(fieldDefinition.GetIndex().ToString());
            testRun.Results[2].Message.Should().Be("1 forekomster av C");
        }
Esempio n. 13
0
        public void ShouldReportIfRecordLengthIsDifferentFromSpecified()
        {
            AddmlRecordDefinition recordDefiniton = new AddmlRecordDefinitionBuilder()
                                                    .WithRecordLength(10)
                                                    .Build();

            AddmlFieldDefinition fieldDefinition = new AddmlFieldDefinitionBuilder()
                                                   .WithRecordDefinition(recordDefiniton)
                                                   .Build();

            FlatFile flatFile = new FlatFile(recordDefiniton.AddmlFlatFileDefinition);

            ControlFixedLength test = new ControlFixedLength();

            test.Run(flatFile);
            test.Run(new Arkade.Core.Base.Addml.Record(recordDefiniton, new List <Field> {
                new Field(fieldDefinition, "1"),
                new Field(fieldDefinition, "12"),
                new Field(fieldDefinition, "123"),
            }));
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(1);
            testRun.Results[0].Location.ToString().Should().Be(recordDefiniton.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("Oppgitt postlengde (10) er ulik faktisk (6)");
        }
Esempio n. 14
0
        public void ShouldNotReportExtraFilesWhenDefinedInDokversXml()
        {
            WorkingDirectory workingDirectory = new WorkingDirectory(null, new DirectoryInfo(TestUtil.TestDataDirectory + "noark4-extrafiles"));

            AddmlFlatFileDefinition flatFileDefinition2 = new AddmlFlatFileDefinitionBuilder()
                                                          .WithFileInfo(new FileInfo(
                                                                            workingDirectory.Content().DirectoryInfo().FullName
                                                                            + Path.DirectorySeparatorChar + "DOKVERS.XML"))
                                                          .WithFileName("DATA\\DOKVERS.XML")
                                                          .Build();

            AddmlDefinition addmlDefinition = new AddmlDefinitionBuilder()
                                              .WithAddmlFlatFileDefinitions(new List <AddmlFlatFileDefinition> {
                flatFileDefinition2
            })
                                              .Build();

            Archive archive = new Archive(ArchiveType.Noark4, Uuid.Random(), workingDirectory);

            ControlExtraOrMissingFiles test = new ControlExtraOrMissingFiles(addmlDefinition, archive);

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeTrue();
        }
Esempio n. 15
0
        public void ShouldVerifyThatOnlyCodesAreUsed()
        {
            AddmlFieldDefinition fieldDefinition = new AddmlFieldDefinitionBuilder()
                                                   .WithCodeList(new List <AddmlCode>
            {
                new AddmlCode("Y", ""),
                new AddmlCode("N", "")
            })
                                                   .Build();
            FlatFile flatFile = new FlatFile(fieldDefinition.GetAddmlFlatFileDefinition());

            ControlCodes test = new ControlCodes();

            test.Run(flatFile);
            test.Run(new Field(fieldDefinition, "Y"));
            test.Run(new Field(fieldDefinition, "N"));
            test.Run(new Field(fieldDefinition, "A"));
            test.Run(new Field(fieldDefinition, "B"));
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(1);
            testRun.Results[0].Location.ToString().Should().Be(fieldDefinition.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("Ikke i kodelisten: A B");
        }
Esempio n. 16
0
        public void ShouldReturnNoErrorsWhenAllForeignKeysExists()
        {
            var addmlFlatFileDefinition = new AddmlFlatFileDefinitionBuilder().Build();
            var recordDef = new AddmlRecordDefinitionBuilder()
                            .WithAddmlFlatFileDefinition(addmlFlatFileDefinition)
                            .Build();

            AddmlFieldDefinition primaryKeyFieldDef = recordDef.AddAddmlFieldDefinition("id", null, null, new IntegerDataType(), true, false,
                                                                                        null, null, null, null, null, true);
            var primaryKeyField = new Field(primaryKeyFieldDef, "1001");

            AddmlFieldDefinition foreignKeyFieldDef = recordDef.AddAddmlFieldDefinition("foreignKeyId", null, null, new IntegerDataType(), true, false,
                                                                                        null, null, null, null, null, false);
            var foreignKeyField = new Field(foreignKeyFieldDef, "1001");

            var controlForeignKey = new ControlForeignKey();

            controlForeignKey.Run(primaryKeyField);
            controlForeignKey.Run(foreignKeyField);

            controlForeignKey.EndOfFile();
            TestRun testRun = controlForeignKey.GetTestRun();

            testRun.IsSuccess().Should().BeTrue();
        }
Esempio n. 17
0
        public void ShouldReportErrorWhenInvalidAccountNumbersAreFound()
        {
            AddmlFieldDefinition fieldDefinition = new AddmlFieldDefinitionBuilder()
                                                   .Build();
            FlatFile flatFile = new FlatFile(fieldDefinition.GetAddmlFlatFileDefinition());

            A_34_ControlAccountNumber test = new A_34_ControlAccountNumber();

            test.Run(flatFile);
            test.Run(new Field(fieldDefinition, "12345678903")); // ok
            test.Run(new Field(fieldDefinition, "12345678901")); // invalid checksum
            test.Run(new Field(fieldDefinition, "1234567890"));  // invalid length
            test.Run(new Field(fieldDefinition, "1234567890A")); // invalid characters
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(3);
            testRun.Results[0].Location.ToString().Should().Be(fieldDefinition.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("Ugyldig kontonummer: 12345678901");
            testRun.Results[1].Location.ToString().Should().Be(fieldDefinition.GetIndex().ToString());
            testRun.Results[1].Message.Should().Be("Ugyldig kontonummer: 1234567890");
            testRun.Results[2].Location.ToString().Should().Be(fieldDefinition.GetIndex().ToString());
            testRun.Results[2].Message.Should().Be("Ugyldig kontonummer: 1234567890A");
        }
Esempio n. 18
0
        public void XmlFilesAreValidAccordingToSchema()
        {
            string workingDirectory =
                $"{AppDomain.CurrentDomain.BaseDirectory}\\TestData\\Noark5\\StructureValidation\\correct";

            TestRun testRun = CreateTestRun(workingDirectory);

            testRun.IsSuccess().Should().BeTrue();
        }
Esempio n. 19
0
        private void Test(TestRun testRun)
        {
            _stream.WriteLine(@"    <div class=""test"">");
            _stream.WriteLine(@"        <h3>");
            _stream.WriteLine(@"        " + testRun.TestName);
            _stream.WriteLine(@"        </h3>");
            _stream.WriteLine(@"");
            _stream.WriteLine(@"        <p class=""test-description"">");
            _stream.WriteLine(@"            " + testRun.TestDescription);
            _stream.WriteLine(@"        </p>");
            _stream.WriteLine(@"");
            _stream.WriteLine(@"        <h4>" + Resources.Report.HeadingTestResults + "</h4>");
            if (testRun.IsSuccess() && (testRun.TestType == TestType.ContentControl || testRun.TestType == TestType.Structure))
            {
                _stream.WriteLine("<p>" + Resources.Report.TestNoErrorsFound + "</p>");
            }
            else
            {
                _stream.WriteLine(@"        <table class=""table"">");
                _stream.WriteLine(@"            <thead>");
                _stream.WriteLine(@"            <tr>");
                _stream.WriteLine(@"                <th>" + Resources.Report.TestLocation + "</th>");
                _stream.WriteLine(@"                <th>" + Resources.Report.TestMessage + "</th>");
                _stream.WriteLine(@"            </tr>");
                _stream.WriteLine(@"            </thead>");
                _stream.WriteLine(@"            <tbody>");

                foreach (TestResult testResult in testRun.Results.Take(NumberOfErrorsToShow)) // TODO only first 100 results are included due to problem loading report in browser
                {
                    _stream.WriteLine(@"            <tr>");
                    _stream.WriteLine(@"                <td>");
                    _stream.WriteLine(@"                " + testResult.Location);
                    _stream.WriteLine(@"                </td>");
                    _stream.WriteLine(@"                <td>");
                    _stream.WriteLine(@"                " + SubstitueLineBreaksWithHtmlBreak(testResult.Message));
                    _stream.WriteLine(@"                </td>");
                    _stream.WriteLine(@"            </tr>");
                }

                if (testRun.Results.Count > NumberOfErrorsToShow)
                {
                    _stream.WriteLine(@"            <tr>");
                    _stream.WriteLine(@"                <td></td>");
                    _stream.WriteLine(@"                <td>" + string.Format(Resources.Report.TestMoreErrorsOfSameKind, testRun.Results.Count - NumberOfErrorsToShow) + "</td>");
                    _stream.WriteLine(@"            </tr>");
                }

                _stream.WriteLine(@"            </tbody>");
                _stream.WriteLine(@"        </table>");
            }
            _stream.WriteLine(@"    </div>");
        }
        public void ShouldReturnSuccessWhenSingleForeignKeyReferenceExist()
        {
            var attachmentDataRecord = new Record(_attachmentRecordDef,
                                                  new Field(_messageIdPrimaryKeyFieldDef, "1001"));

            var testRecord = new Record(_recordDef,
                                        new Field(_primaryKeyFieldDef, "1234"),
                                        new Field(_foreignKeyMessageIdFieldDef, "1001"));

            TestRun testRun = RunTest(testRecord, attachmentDataRecord);

            testRun.IsSuccess().Should().BeTrue();
        }
Esempio n. 21
0
        public void ShouldReportIfKeyIsNotUnique()
        {
            AddmlRecordDefinition recordDefinition = new AddmlRecordDefinitionBuilder()
                                                     .Build();
            AddmlFieldDefinition fieldDefinition = new AddmlFieldDefinitionBuilder()
                                                   .WithRecordDefinition(recordDefinition)
                                                   .IsPartOfPrimaryKey(true)
                                                   .Build();
            AddmlFieldDefinition fieldDefinition2 = new AddmlFieldDefinitionBuilder()
                                                    .WithRecordDefinition(recordDefinition)
                                                    .IsPartOfPrimaryKey(false)
                                                    .Build();
            FlatFile flatFile = new FlatFile(recordDefinition.AddmlFlatFileDefinition);

            ControlKey test = new ControlKey();

            test.Run(flatFile);
            test.Run(new Arkade.Core.Addml.Record(recordDefinition, new List <Field> {
                new Field(fieldDefinition, "A"),
                new Field(fieldDefinition, "A"),
                new Field(fieldDefinition2, "B")
            }));
            test.Run(new Arkade.Core.Addml.Record(recordDefinition, new List <Field> {
                new Field(fieldDefinition, "A"),
                new Field(fieldDefinition, "B"),
                new Field(fieldDefinition2, "B")
            }));
            test.Run(new Arkade.Core.Addml.Record(recordDefinition, new List <Field> {
                new Field(fieldDefinition, "A"),
                new Field(fieldDefinition, "C"),
                new Field(fieldDefinition2, "B")
            }));
            test.Run(new Arkade.Core.Addml.Record(recordDefinition, new List <Field> {
                new Field(fieldDefinition, "A"),
                new Field(fieldDefinition, "B"),
                new Field(fieldDefinition2, "B")
            }));
            test.Run(new Arkade.Core.Addml.Record(recordDefinition, new List <Field> {
                new Field(fieldDefinition, "A"),
                new Field(fieldDefinition, "C"),
                new Field(fieldDefinition2, "C")
            }));
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(1);
            testRun.Results[0].Location.ToString().Should().Be(recordDefinition.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("Følgende primærnøkkelverdier er ikke unike: A,B A,C");
        }
Esempio n. 22
0
        private void Test(TestRun testRun)
        {
            _stream.WriteLine(@"    <div class=""test"">");
            _stream.WriteLine(@"        <h3>");
            _stream.WriteLine(@"        " + testRun.TestName);
            _stream.WriteLine(@"        </h3>");
            _stream.WriteLine(@"");
            _stream.WriteLine(@"        <p class=""test-description"">");
            _stream.WriteLine(@"            " + testRun.TestDescription);
            _stream.WriteLine(@"        </p>");
            _stream.WriteLine(@"");

            /*
             * sb.AppendLine(@"        <p class=""test-duration"">");
             * sb.AppendLine(@"            Tidsbruk: " + testRun.TestDuration + " millisekunder");
             * sb.AppendLine(@"        </p>");
             * sb.AppendLine(@"");
             */
            _stream.WriteLine(@"        <h4>Testresultater</h4>");
            if (testRun.IsSuccess() && (testRun.TestType == TestType.ContentControl || testRun.TestType == TestType.Structure))
            {
                _stream.WriteLine("<p>Ingen avvik funnet.</p>");
            }
            else
            {
                _stream.WriteLine(@"        <table class=""table"">");
                _stream.WriteLine(@"            <thead>");
                _stream.WriteLine(@"            <tr>");
                _stream.WriteLine(@"                <th>Lokasjon</th>");
                _stream.WriteLine(@"                <th>Melding</th>");
                _stream.WriteLine(@"            </tr>");
                _stream.WriteLine(@"            </thead>");
                _stream.WriteLine(@"            <tbody>");

                foreach (TestResult testResult in testRun.Results.Take(100)) // TODO only first 100 results are included due to problem loading report in browser
                {
                    _stream.WriteLine(@"            <tr>");
                    _stream.WriteLine(@"                <td>");
                    _stream.WriteLine(@"                " + testResult.Location);
                    _stream.WriteLine(@"                </td>");
                    _stream.WriteLine(@"                <td>");
                    _stream.WriteLine(@"                " + testResult.Message);
                    _stream.WriteLine(@"                </td>");
                    _stream.WriteLine(@"            </tr>");
                }

                _stream.WriteLine(@"            </tbody>");
                _stream.WriteLine(@"        </table>");
            }
            _stream.WriteLine(@"    </div>");
        }
        public void ShouldReturnErrorWhenCombinedForeignKeysReferenceDoesNotExist()
        {
            var attachmentDataRecord = new Record(_attachmentRecordDef,
                                                  new Field(_messageIdPrimaryKeyFieldDef, "556677"),
                                                  new Field(_attachmentNumberPrimaryKeyFieldDef, "1"));

            var testRecord = new Record(_recordWithBothCombinedAndSingleForeignKeyDef,
                                        new Field(_primaryKeyFieldDef, "1234"),
                                        new Field(_foreignKeyMessageIdFieldDef, "1001"),
                                        new Field(_foreignKeyAttachmentNumberFieldDef, "1"));

            TestRun testRun = A_16_ControlForeignKeySingleTest.RunTest(attachmentDataRecord, testRecord);

            testRun.IsSuccess().Should().BeFalse();
        }
Esempio n. 24
0
        public void ShouldReportIncorrectStringDataFormat()
        {
            AddmlFieldDefinition fieldDefinition1 = new AddmlFieldDefinitionBuilder()
                                                    .WithDataType(new StringDataType("fnr", null))
                                                    .Build();

            AddmlFieldDefinition fieldDefinition2 = new AddmlFieldDefinitionBuilder()
                                                    .WithDataType(new StringDataType("org", null))
                                                    .Build();

            AddmlFieldDefinition fieldDefinition3 = new AddmlFieldDefinitionBuilder()
                                                    .WithDataType(new StringDataType("knr", null))
                                                    .Build();

            AddmlFieldDefinition fieldDefinition4 = new AddmlFieldDefinitionBuilder()
                                                    .WithDataType(new StringDataType(null, null))
                                                    .Build();

            FlatFile flatFile = new FlatFile(fieldDefinition1.GetAddmlFlatFileDefinition());

            ControlDataFormat test = new ControlDataFormat();

            test.Run(flatFile);
            test.Run(new Field(fieldDefinition1, ""));
            test.Run(new Field(fieldDefinition1, "17080232930")); // not ok
            test.Run(new Field(fieldDefinition1, "17080232934")); // ok
            test.Run(new Field(fieldDefinition2, ""));
            test.Run(new Field(fieldDefinition2, "914994781"));   // not ok
            test.Run(new Field(fieldDefinition2, "914994780"));   // ok
            test.Run(new Field(fieldDefinition3, ""));
            test.Run(new Field(fieldDefinition3, "63450608211")); // not ok
            test.Run(new Field(fieldDefinition3, "63450608213")); // ok
            test.Run(new Field(fieldDefinition4, ""));
            test.Run(new Field(fieldDefinition4, "A"));
            test.Run(new Field(fieldDefinition4, "B"));
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(3);
            testRun.Results[0].Location.ToString().Should().Be(fieldDefinition1.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("Ugyldig dataformat: '', '17080232930'");
            testRun.Results[1].Location.ToString().Should().Be(fieldDefinition2.GetIndex().ToString());
            testRun.Results[1].Message.Should().Be("Ugyldig dataformat: '', '914994781'");
            testRun.Results[2].Location.ToString().Should().Be(fieldDefinition3.GetIndex().ToString());
            testRun.Results[2].Message.Should().Be("Ugyldig dataformat: '', '63450608211'");
        }
        public void ShouldReturnErrorWhenSingleForeignKeyReferenceDoesNotExist()
        {
            var attachmentDataRecord1 = new Record(_attachmentRecordDef, new Field(_messageIdPrimaryKeyFieldDef, "556677"));
            var attachmentDataRecord2 = new Record(_attachmentRecordDef, new Field(_messageIdPrimaryKeyFieldDef, "1002"));

            var testRecord1 = new Record(_recordDef,
                                         new Field(_primaryKeyFieldDef, "1234"),
                                         new Field(_foreignKeyMessageIdFieldDef, "1001"));

            var testRecord2 = new Record(_recordDef,
                                         new Field(_primaryKeyFieldDef, "1235"),
                                         new Field(_foreignKeyMessageIdFieldDef, "1002"));

            TestRun testRun = RunTest(testRecord1, testRecord2, attachmentDataRecord1, attachmentDataRecord2);

            testRun.IsSuccess().Should().BeFalse();
        }
Esempio n. 26
0
        public void ShouldFindMaxAndMinLengthRecord()
        {
            AddmlFlatFileDefinition flatFileDefinition = new AddmlFlatFileDefinitionBuilder()
                                                         .WithFieldSeparator("BB")
                                                         .WithRecordSeparator("A")
                                                         .Build();
            FlatFile flatFile = new FlatFile(flatFileDefinition);
            AddmlRecordDefinition recordDefinition = new AddmlRecordDefinitionBuilder()
                                                     .WithAddmlFlatFileDefinition(flatFileDefinition)
                                                     .Build();
            AddmlFieldDefinition fieldDefinition = new AddmlFieldDefinitionBuilder()
                                                   .WithRecordDefinition(recordDefinition)
                                                   .Build();

            List <Field> fields1 = new List <Field>
            {
                new Field(fieldDefinition, "1234567890"),
                new Field(fieldDefinition, "12345"),
                new Field(fieldDefinition, "1")
            };
            Record record1 = new Record(recordDefinition, fields1);

            List <Field> fields2 = new List <Field>
            {
                new Field(fieldDefinition, "1"),
                new Field(fieldDefinition, ""),
                new Field(fieldDefinition, "3")
            };
            Record record2 = new Record(recordDefinition, fields2);


            AnalyseFindExtremeRecords test = new AnalyseFindExtremeRecords();

            test.Run(flatFile);
            test.Run(record1);
            test.Run(record2);
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeTrue();
            testRun.Results.Count.Should().Be(1);
            testRun.Results[0].Location.ToString().Should().Be(recordDefinition.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("Lengste/korteste post: 20/6");
        }
Esempio n. 27
0
        public void ShouldReportIncorrectIntegerDataFormat()
        {
            AddmlFieldDefinition fieldDefinition1 = new AddmlFieldDefinitionBuilder()
                                                    .WithDataType(new IntegerDataType("n.nnn", null))
                                                    .Build();
            AddmlFieldDefinition fieldDefinition2 = new AddmlFieldDefinitionBuilder()
                                                    .WithDataType(new IntegerDataType("nnE+exp", null))
                                                    .Build();
            AddmlFieldDefinition fieldDefinition3 = new AddmlFieldDefinitionBuilder()
                                                    .WithDataType(new IntegerDataType(null, null))
                                                    .Build();

            FlatFile flatFile = new FlatFile(fieldDefinition1.GetAddmlFlatFileDefinition());

            ControlDataFormat test = new ControlDataFormat();

            test.Run(flatFile);
            test.Run(new Field(fieldDefinition1, "1"));
            test.Run(new Field(fieldDefinition1, "1.100"));
            test.Run(new Field(fieldDefinition1, "1.1"));
            test.Run(new Field(fieldDefinition1, "1E+2"));
            test.Run(new Field(fieldDefinition1, "notanint1"));
            test.Run(new Field(fieldDefinition2, "1"));
            test.Run(new Field(fieldDefinition2, "1.100"));
            test.Run(new Field(fieldDefinition2, "1.1"));
            test.Run(new Field(fieldDefinition2, "1E+2"));
            test.Run(new Field(fieldDefinition2, "notanint1"));
            test.Run(new Field(fieldDefinition3, "1"));
            test.Run(new Field(fieldDefinition3, "1.100"));
            test.Run(new Field(fieldDefinition3, "1.1"));
            test.Run(new Field(fieldDefinition3, "1E+2"));
            test.Run(new Field(fieldDefinition3, "notanint1"));
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(3);
            testRun.Results[0].Location.ToString().Should().Be(fieldDefinition1.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("Ugyldig dataformat: '1.1', '1E+2', 'notanint1'");
            testRun.Results[1].Location.ToString().Should().Be(fieldDefinition2.GetIndex().ToString());
            testRun.Results[1].Message.Should().Be("Ugyldig dataformat: '1', '1.100', '1.1', 'notanint1'");
            testRun.Results[2].Location.ToString().Should().Be(fieldDefinition3.GetIndex().ToString());
            testRun.Results[2].Message.Should().Be("Ugyldig dataformat: '1.100', '1.1', '1E+2', 'notanint1'");
        }
        public void ShouldReportWhenFileInArchiveIsNotReferencedInAddml()
        {
            WorkingDirectory workingDirectory = new WorkingDirectory(null, new DirectoryInfo(TestUtil.TestDataDirectory + "noark3"));

            AddmlFlatFileDefinition flatFileDefinition1 = new AddmlFlatFileDefinitionBuilder()
                                                          .WithFileInfo(new FileInfo(workingDirectory.Content().DirectoryInfo().FullName + Path.DirectorySeparatorChar + "nosuchfile.txt"))
                                                          .WithFileName("nosuchfile.txt")
                                                          .Build();

            AddmlFlatFileDefinition flatFileDefinition2 = new AddmlFlatFileDefinitionBuilder()
                                                          .WithFileInfo(new FileInfo(workingDirectory.Content().DirectoryInfo().FullName + Path.DirectorySeparatorChar + "ARKIV.DAT"))
                                                          .WithFileName("ARKIV.DAT")
                                                          .Build();

            AddmlDefinition addmlDefinition = new AddmlDefinitionBuilder()
                                              .WithAddmlFlatFileDefinitions(
                new List <AddmlFlatFileDefinition> {
                flatFileDefinition1,
                flatFileDefinition2
            },
                new List <AddmlFlatFileDefinition> {
                flatFileDefinition1,
            })
                                              .Build();

            Archive archive = new Archive(ArchiveType.Fagsystem, Uuid.Random(), workingDirectory);

            AH_02_ControlExtraOrMissingFiles test = new AH_02_ControlExtraOrMissingFiles(addmlDefinition, archive);

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeFalse();
            testRun.Results.Count.Should().Be(4);
            string errorMessage = "Finnes i arkiv, men ikke i ADDML";

            testRun.Results[0].Location.ToString().Should().Contain("DOK.DAT");
            testRun.Results[0].Message.Should().Be(errorMessage);
            testRun.Results[1].Location.ToString().Should().Contain("noark_3_arkivuttrekk_med_prosesser.xml");
            testRun.Results[1].Message.Should().Be(errorMessage);
            testRun.Results[2].Location.ToString().Should().Contain("SAK.DAT");
            testRun.Results[2].Message.Should().Be(errorMessage);
            testRun.Results[3].Location.ToString().Should().Contain("nosuchfile.txt");
            testRun.Results[3].Message.Should().Be("Finnes i ADDML, men ikke i arkiv");
        }
        public void ShouldReturnSuccessWhenCombinedForeignKeysAndSingleForeignKeyReferencesExist()
        {
            var attachmentDataRecord = new Record(_attachmentRecordDef,
                                                  new Field(_messageIdPrimaryKeyFieldDef, "1001"),
                                                  new Field(_attachmentNumberPrimaryKeyFieldDef, "1"));

            var documentRecord = new Record(_documentRecordDef,
                                            new Field(_documentPrimaryKeyFieldDef, "42"));

            var testRecord = new Record(_recordWithBothCombinedAndSingleForeignKeyDef,
                                        new Field(_primaryKeyFieldDef, "1234"),
                                        new Field(_foreignKeyMessageIdFieldDef, "1001"),
                                        new Field(_foreignKeyAttachmentNumberFieldDef, "1"),
                                        new Field(_foreignKeyDocumentIdFieldDef, "42"));

            TestRun testRun = A_16_ControlForeignKeySingleTest.RunTest(attachmentDataRecord, documentRecord, testRecord);

            testRun.IsSuccess().Should().BeTrue();
        }
Esempio n. 30
0
        public void ShouldOnlyCreateFrequencyListOfCodeDefinitions()
        {
            AddmlFieldDefinition fieldDefinitionWithCodeList = new AddmlFieldDefinitionBuilder()
                                                               .WithCodeList(new List <AddmlCode>
            {
                new AddmlCode("A", ""),
                new AddmlCode("B", ""),
                new AddmlCode("C", ""),
            })
                                                               .Build();
            AddmlFieldDefinition fieldDefinitionWithoutCodeList = new AddmlFieldDefinitionBuilder()
                                                                  .WithRecordDefinition(fieldDefinitionWithCodeList.AddmlRecordDefinition)
                                                                  .Build();
            FlatFile flatFile = new FlatFile(fieldDefinitionWithCodeList.GetAddmlFlatFileDefinition());

            A_05_AnalyseAllFrequenceList test = new A_05_AnalyseAllFrequenceList();

            test.Run(flatFile);
            test.Run(new Field(fieldDefinitionWithCodeList, "A"));
            test.Run(new Field(fieldDefinitionWithCodeList, "A"));
            test.Run(new Field(fieldDefinitionWithCodeList, "B"));
            test.Run(new Field(fieldDefinitionWithCodeList, "B"));
            test.Run(new Field(fieldDefinitionWithCodeList, "B"));
            test.Run(new Field(fieldDefinitionWithCodeList, "C"));
            test.Run(new Field(fieldDefinitionWithoutCodeList, "A"));
            test.Run(new Field(fieldDefinitionWithoutCodeList, "A"));
            test.Run(new Field(fieldDefinitionWithoutCodeList, "B"));
            test.Run(new Field(fieldDefinitionWithoutCodeList, "B"));
            test.Run(new Field(fieldDefinitionWithoutCodeList, "C"));
            test.EndOfFile();

            TestRun testRun = test.GetTestRun();

            testRun.IsSuccess().Should().BeTrue();
            testRun.Results.Count.Should().Be(3);
            testRun.Results[0].Location.ToString().Should().Be(fieldDefinitionWithCodeList.GetIndex().ToString());
            testRun.Results[0].Message.Should().Be("2 forekomster av A");
            testRun.Results[1].Location.ToString().Should().Be(fieldDefinitionWithCodeList.GetIndex().ToString());
            testRun.Results[1].Message.Should().Be("3 forekomster av B");
            testRun.Results[2].Location.ToString().Should().Be(fieldDefinitionWithCodeList.GetIndex().ToString());
            testRun.Results[2].Message.Should().Be("1 forekomster av C");
        }