public void AddFeature(SldWorks SwApp, ModelDoc2 SwModel, Point2D P1, Point2D P2)
{
if (CheckUsing() == false)
{
return;
}
SwModel.ClearSelection2(true);
Helper helper = new Helper(SwModel, SwApp);
SketchManager sketchManager = SwModel.SketchManager;
FeatureManager featureManager = SwModel.FeatureManager;
SelectionMgr selectionMgr = SwModel.SelectionManager;
Feature feature = default(Feature);
Entity entity = default(Entity);
Face2 face2 = default(Face2);
Array faceArray = default(Array);
Array edgeArray = default(Array);
Edge swEdge = default(Edge);
List <double> filletedges = new List <double>();
double edgeL = default(double);
double[] TNormal = { 0, 1, 0 }; // Y up normal
double[] LNormal = { 0, 0, 1 }; // +Z normal
double[] RNormal = { 0, 0, -1 }; // -Z normal
CurveParamData curveParamData = default(CurveParamData);
double LStage = P2.x - P1.x;
#region // add features
helper.select_feature("RefPlane", 0, false, 0);
SwModel.InsertSketch();
if (splinedMethod == (object)"From Start")
{
sketchManager.CreateLine(P1.x, P1.y, 0, (P1.x + splinedLength), P1.y, 0); // top line
sketchManager.CreateLine(P1.x, splinedR, 0, ((P1.x + splinedLength) - splinedArcL), splinedR, 0);
// bottom line
sketchManager.CreateLine(P1.x, P1.y, 0, P1.x, splinedR, 0); //left line
sketchManager.CreateTangentArc((P1.x + (splinedLength - splinedArcL)), splinedR, 0,
(P1.x + splinedLength),
P1.y, 0, 1);
}
if (splinedMethod == (object)"From End")
{
sketchManager.CreateLine(P2.x, P1.y, 0, (P2.x - splinedLength), P2.y, 0); // top line
sketchManager.CreateLine(P2.x, splinedR, 0, (P2.x - (splinedLength - splinedArcL)), splinedR, 0);
// bottom line
sketchManager.CreateLine(P2.x, P1.y, 0, P2.x, splinedR, 0); //left line
sketchManager.CreateTangentArc((P2.x - (splinedLength - splinedArcL)), splinedR, 0,
(P2.x - splinedLength),
P1.y, 0, 0);
}
if (splinedMethod == (object)"Through")
{
sketchManager.CreateCenterRectangle((P1.x + (LStage / 2)), (splinedR + (P1.y - splinedR) / 2), 0,
P1.x, P1.y, 0);
}
SwModel.FeatureManager.FeatureCut3(true, false, false, 6, 0, splinedWidth, 0,
false, false, false, false, 0, 0, false, false, false, false, false, true, true, true, true,
false, 0, 0, false); //cut from mide plane
#endregion
feature = (Feature)selectionMgr.GetSelectedObject6(1, -1);
faceArray = feature.GetFaces() as Array;
#region // edge filleting, 0 - pass
if (splinedFillet != 0)
{
for (int j = 0; j < faceArray.Length; j++) // get face by normal 0,1,0
{
face2 = faceArray.GetValue(j) as Face2;
var normal = face2.Normal;
if (TNormal.SequenceEqual(normal as double[]))
{
entity = faceArray.GetValue(j) as Entity;
entity.Select4(false, null);
// MessageBox.Show(j.ToString());
break;
}
}
face2 = selectionMgr.GetSelectedObject6(1, -1);
edgeArray = face2.GetEdges() as Array;
// MessageBox.Show(""+face2.GetEdgeCount().ToString());
SwModel.ClearSelection();
for (int j = 0; j < face2.GetEdgeCount(); j++) // finding of edge length
{
swEdge = edgeArray.GetValue(j) as Edge;
curveParamData = swEdge.GetCurveParams3();
edgeL = Math.Abs(curveParamData.UMaxValue - curveParamData.UMinValue);
filletedges.Add(edgeL);
}
double max = filletedges.Max();
for (int j = 0; j < filletedges.Count; j++) // select edges for filleting
{
if (filletedges[j] == max)
{
entity = edgeArray.GetValue(j) as Entity;
entity.Select4(true, null);
}
}
featureManager.FeatureFillet(194, splinedFillet, 0, 0, null, null, null);
// edges fillet 194 - target propagate off
SwModel.ClearSelection2(true);
}
#endregion
#region // edge chamfering, 0 - pass
if (splinedChamfer != 0)
{
List <Face2> facesList = new List <Face2>();
facesList.Add(default(Face2)); // empty element
facesList.Add(default(Face2)); // empty element
for (int j = 0; j < faceArray.Length; j++) // select faces by normal
{
face2 = faceArray.GetValue(j) as Face2;
var normal = face2.Normal;
if (LNormal.SequenceEqual(normal as double[]))
{
facesList[0] = face2;
}
if (RNormal.SequenceEqual(normal as double[]))
{
facesList[1] = face2;
}
}
faceArray = facesList.ToArray() as Array; // refill array of neded face's
int index_f0 = 0; // index of top edge L
int index_f1 = 0; // index of top edge R
for (int j = 0; j < faceArray.Length; j++)
{
face2 = faceArray.GetValue(j) as Face2;
edgeArray = face2.GetEdges() as Array;
swEdge = edgeArray.GetValue(0) as Edge;
CurveParamData cData = swEdge.GetCurveParams3() as CurveParamData;
var Spoint = (double[])cData.StartPoint;
var Epoint = (double[])cData.EndPoint;
for (int k = 0; k < edgeArray.Length; k++)
{
swEdge = edgeArray.GetValue(k) as Edge;
cData = swEdge.GetCurveParams3() as CurveParamData;
var SP = (double[])cData.StartPoint;
var EP = (double[])cData.EndPoint;
if ((SP[1] >= Spoint[1]) && (EP[1] >= Epoint[1])) // check max y cordinats of the edge
{
if (Spoint[1] == Spoint[1]) // horisontal line always have same y cordinats
{
Epoint = EP;
Spoint = SP;
if (j == 0)
{
index_f0 = k;
}
else
{
index_f1 = k;
}
}
}
}
}
// finally selecy top up edges
face2 = faceArray.GetValue(0) as Face2;
edgeArray = face2.GetEdges() as Array;
entity = edgeArray.GetValue(index_f0) as Entity;
entity.Select4(false, null);
face2 = faceArray.GetValue(1) as Face2;
edgeArray = face2.GetEdges() as Array;
entity = edgeArray.GetValue(index_f1) as Entity;
entity.Select4(true, null);
int chamferOpt = 4; // target propagate by default
if (splinedMethod == (object)"From Start" ||
splinedMethod == (object)"From End")
{
chamferOpt = 1; // flip direction
}
featureManager.InsertFeatureChamfer(chamferOpt, 1, splinedChamfer, helper.ToRad(45), 0, 0, 0, 0);
SwModel.ClearSelection2(true);
}
#endregion
#region //Pattern if value less then 1 pass
if (splinedArray > 1)
{
helper.select_feature("Cut", (helper.get_features_count("Cut") - 1), false, 4);
helper.select_feature("RefAxis", 0, true, 1);
if (splinedChamfer > 0)
{
helper.select_feature("Chamfer", (helper.get_features_count("Chamfer") - 1), true, 4);
}
if (splinedFillet > 0)
{
helper.select_feature("Fillet", (helper.get_features_count("Fillet") - 1), true, 4);
}
featureManager.FeatureCircularPattern4(splinedArray, helper.ToRad(360), false, "null", false, true,
false);
}
#endregion
helper.HidePlanes();
}