public static void DrawSketch(ModelDoc2 SketchDoc)
{
SketchManager SwSketchMrg = SketchDoc.SketchManager;//获得SketchManager对象
SketchDoc.Extension.SelectByID2("前视基准面", "PLANE", 0, 0, 0, false, 0, null, 0);
SwSketchMrg.InsertSketch(true);//进入编辑草图模式
object[] ObjRectangle = SwSketchMrg.CreateCenterRectangle(0, 0, 0, 0.075, 0.04, 0);
SketchSegment SktCircle1 = SwSketchMrg.CreateCircle(-0.0425, 0, 0, -0.03, 0, 0);
SketchSegment SktCircle2 = SwSketchMrg.CreateCircle(0.0425, 0, 0, 0.03, 0, 0);
SketchSegment SktCentLine = SwSketchMrg.CreateCenterLine(0, 0.04, 0, 0, -0.04, 0);
SwSketchMrg.InsertSketch(true);//退出编辑草图模式
}
/// <summary>
/// Рисует тело, в котором будут отверстия
/// </summary>
/// <returns>Возвращает объект, на котором будут сделаны ячейки</returns>
public void drawBody()
{
//получем ссылку на интерфейс, ответственный за рисование
swSketchManager = application.swModel.SketchManager;
application.swModel.Extension.SelectByID2("Сверху", "PLANE", 0, 0, 0, false, 0, null, 0); //выбрал плоскость
swSketchManager.InsertSketch(false);
sketch = application.swModel.GetActiveSketch2();
//создать основание
var rect = swSketchManager.CreateCenterRectangle(0, 0, 0, body.GetWidth() / acc / 2.0, body.GetHeight() / acc / 2.0, 0);
//очистить буфер выбранных элементов
application.swModel.ClearSelection();
//вытянуть бобышку
Feature feature = featureExtrusion(body.GetLenght() / acc);
application.swModel.ClearSelection();
body3d = feature;
}
public void AddFeature(SldWorks SwApp, ModelDoc2 SwModel, Point2D P1, Point2D P2)
{
if (CheckUsing() == false)
{
return;
}
SwModel.ClearSelection2(true);
Helper helper = new Helper(SwModel, SwApp);
SketchManager sketchManager = SwModel.SketchManager;
FeatureManager featureManager = SwModel.FeatureManager;
SelectionMgr selectionMgr = SwModel.SelectionManager;
Feature feature = default(Feature);
Entity entity = default(Entity);
Face2 face2 = default(Face2);
Array faceArray = default(Array);
Array edgeArray = default(Array);
Edge swEdge = default(Edge);
List <double> filletedges = new List <double>();
double edgeL = default(double);
double[] TNormal = { 0, 1, 0 }; // Y up normal
double[] LNormal = { 0, 0, 1 }; // +Z normal
double[] RNormal = { 0, 0, -1 }; // -Z normal
CurveParamData curveParamData = default(CurveParamData);
double LStage = P2.x - P1.x;
#region // add features
helper.select_feature("RefPlane", 0, false, 0);
SwModel.InsertSketch();
if (splinedMethod == (object)"From Start")
{
sketchManager.CreateLine(P1.x, P1.y, 0, (P1.x + splinedLength), P1.y, 0); // top line
sketchManager.CreateLine(P1.x, splinedR, 0, ((P1.x + splinedLength) - splinedArcL), splinedR, 0);
// bottom line
sketchManager.CreateLine(P1.x, P1.y, 0, P1.x, splinedR, 0); //left line
sketchManager.CreateTangentArc((P1.x + (splinedLength - splinedArcL)), splinedR, 0,
(P1.x + splinedLength),
P1.y, 0, 1);
}
if (splinedMethod == (object)"From End")
{
sketchManager.CreateLine(P2.x, P1.y, 0, (P2.x - splinedLength), P2.y, 0); // top line
sketchManager.CreateLine(P2.x, splinedR, 0, (P2.x - (splinedLength - splinedArcL)), splinedR, 0);
// bottom line
sketchManager.CreateLine(P2.x, P1.y, 0, P2.x, splinedR, 0); //left line
sketchManager.CreateTangentArc((P2.x - (splinedLength - splinedArcL)), splinedR, 0,
(P2.x - splinedLength),
P1.y, 0, 0);
}
if (splinedMethod == (object)"Through")
{
sketchManager.CreateCenterRectangle((P1.x + (LStage / 2)), (splinedR + (P1.y - splinedR) / 2), 0,
P1.x, P1.y, 0);
}
SwModel.FeatureManager.FeatureCut3(true, false, false, 6, 0, splinedWidth, 0,
false, false, false, false, 0, 0, false, false, false, false, false, true, true, true, true,
false, 0, 0, false); //cut from mide plane
#endregion
feature = (Feature)selectionMgr.GetSelectedObject6(1, -1);
faceArray = feature.GetFaces() as Array;
#region // edge filleting, 0 - pass
if (splinedFillet != 0)
{
for (int j = 0; j < faceArray.Length; j++) // get face by normal 0,1,0
{
face2 = faceArray.GetValue(j) as Face2;
var normal = face2.Normal;
if (TNormal.SequenceEqual(normal as double[]))
{
entity = faceArray.GetValue(j) as Entity;
entity.Select4(false, null);
// MessageBox.Show(j.ToString());
break;
}
}
face2 = selectionMgr.GetSelectedObject6(1, -1);
edgeArray = face2.GetEdges() as Array;
// MessageBox.Show(""+face2.GetEdgeCount().ToString());
SwModel.ClearSelection();
for (int j = 0; j < face2.GetEdgeCount(); j++) // finding of edge length
{
swEdge = edgeArray.GetValue(j) as Edge;
curveParamData = swEdge.GetCurveParams3();
edgeL = Math.Abs(curveParamData.UMaxValue - curveParamData.UMinValue);
filletedges.Add(edgeL);
}
double max = filletedges.Max();
for (int j = 0; j < filletedges.Count; j++) // select edges for filleting
{
if (filletedges[j] == max)
{
entity = edgeArray.GetValue(j) as Entity;
entity.Select4(true, null);
}
}
featureManager.FeatureFillet(194, splinedFillet, 0, 0, null, null, null);
// edges fillet 194 - target propagate off
SwModel.ClearSelection2(true);
}
#endregion
#region // edge chamfering, 0 - pass
if (splinedChamfer != 0)
{
List <Face2> facesList = new List <Face2>();
facesList.Add(default(Face2)); // empty element
facesList.Add(default(Face2)); // empty element
for (int j = 0; j < faceArray.Length; j++) // select faces by normal
{
face2 = faceArray.GetValue(j) as Face2;
var normal = face2.Normal;
if (LNormal.SequenceEqual(normal as double[]))
{
facesList[0] = face2;
}
if (RNormal.SequenceEqual(normal as double[]))
{
facesList[1] = face2;
}
}
faceArray = facesList.ToArray() as Array; // refill array of neded face's
int index_f0 = 0; // index of top edge L
int index_f1 = 0; // index of top edge R
for (int j = 0; j < faceArray.Length; j++)
{
face2 = faceArray.GetValue(j) as Face2;
edgeArray = face2.GetEdges() as Array;
swEdge = edgeArray.GetValue(0) as Edge;
CurveParamData cData = swEdge.GetCurveParams3() as CurveParamData;
var Spoint = (double[])cData.StartPoint;
var Epoint = (double[])cData.EndPoint;
for (int k = 0; k < edgeArray.Length; k++)
{
swEdge = edgeArray.GetValue(k) as Edge;
cData = swEdge.GetCurveParams3() as CurveParamData;
var SP = (double[])cData.StartPoint;
var EP = (double[])cData.EndPoint;
if ((SP[1] >= Spoint[1]) && (EP[1] >= Epoint[1])) // check max y cordinats of the edge
{
if (Spoint[1] == Spoint[1]) // horisontal line always have same y cordinats
{
Epoint = EP;
Spoint = SP;
if (j == 0)
{
index_f0 = k;
}
else
{
index_f1 = k;
}
}
}
}
}
// finally selecy top up edges
face2 = faceArray.GetValue(0) as Face2;
edgeArray = face2.GetEdges() as Array;
entity = edgeArray.GetValue(index_f0) as Entity;
entity.Select4(false, null);
face2 = faceArray.GetValue(1) as Face2;
edgeArray = face2.GetEdges() as Array;
entity = edgeArray.GetValue(index_f1) as Entity;
entity.Select4(true, null);
int chamferOpt = 4; // target propagate by default
if (splinedMethod == (object)"From Start" ||
splinedMethod == (object)"From End")
{
chamferOpt = 1; // flip direction
}
featureManager.InsertFeatureChamfer(chamferOpt, 1, splinedChamfer, helper.ToRad(45), 0, 0, 0, 0);
SwModel.ClearSelection2(true);
}
#endregion
#region //Pattern if value less then 1 pass
if (splinedArray > 1)
{
helper.select_feature("Cut", (helper.get_features_count("Cut") - 1), false, 4);
helper.select_feature("RefAxis", 0, true, 1);
if (splinedChamfer > 0)
{
helper.select_feature("Chamfer", (helper.get_features_count("Chamfer") - 1), true, 4);
}
if (splinedFillet > 0)
{
helper.select_feature("Fillet", (helper.get_features_count("Fillet") - 1), true, 4);
}
featureManager.FeatureCircularPattern4(splinedArray, helper.ToRad(360), false, "null", false, true,
false);
}
#endregion
helper.HidePlanes();
}
public static void AddConstraintAndDim(ModelDoc2 SketchDoc)
{
SketchManager SwSketchMrg = SketchDoc.SketchManager;//获得SketchManager对象
SketchDoc.Extension.SelectByID2("前视基准面", "PLANE", 0, 0, 0, false, 0, null, 0);
SwSketchMrg.InsertSketch(true);//进入编辑草图模式
object[] ObjRectangle = SwSketchMrg.CreateCenterRectangle(0, 0, 0, 0.075, 0.04, 0);
SketchSegment SktCircle1 = SwSketchMrg.CreateCircle(-0.0425, 0, 0, -0.03, 0, 0);
SketchSegment SktCircle2 = SwSketchMrg.CreateCircle(0.0425, 0, 0, 0.03, 0, 0);
SketchSegment SktCentLine = SwSketchMrg.CreateCenterLine(0, 0.04, 0, 0, -0.04, 0);
#region 两个圆心添加水平
SketchDoc.ClearSelection2(true);
SketchDoc.Extension.SelectByID2("", "SKETCHPOINT", -0.0425, 0, 0, true, 0, null, 0);
SketchDoc.Extension.SelectByID2("", "SKETCHPOINT", 0.0425, 0, 0, true, 0, null, 0);
SketchDoc.SketchAddConstraints("sgHORIZONTALPOINTS2D");
#endregion
#region 两个圆心添加对称
SketchDoc.ClearSelection2(true);
SketchDoc.Extension.SelectByID2("", "SKETCHPOINT", -0.0425, 0, 0, true, 0, null, 0);
SketchDoc.Extension.SelectByID2("", "SKETCHPOINT", 0.0425, 0, 0, true, 0, null, 0);
SktCentLine.Select(true);
SketchDoc.SketchAddConstraints("sgSYMMETRIC");
#endregion
#region 圆心与坐标原点水平
SketchDoc.ClearSelection2(true);
SketchDoc.Extension.SelectByID2("", "SKETCHPOINT", -0.0425, 0, 0, true, 0, null, 0);
SketchDoc.Extension.SelectByID2("", "SKETCHPOINT", 0, 0, 0, true, 0, null, 0);
SketchDoc.SketchAddConstraints("sgHORIZONTALPOINTS2D");
#endregion
#region 添加孔间距尺寸
SketchDoc.ClearSelection2(true);
SketchDoc.Extension.SelectByID2("", "SKETCHPOINT", -0.0425, 0, 0, true, 0, null, 0);
SketchDoc.Extension.SelectByID2("", "SKETCHPOINT", 0.0425, 0, 0, true, 0, null, 0);
SketchDoc.AddDimension2(0, 0.05, 0);
#endregion
#region 两个圆添加相同大小
SktCircle1.Select(false);
SktCircle2.Select(true);
SketchDoc.SketchAddConstraints("sgSAMELENGTH");
#endregion
#region 添加圆尺寸
SktCircle1.Select(false);
SketchDoc.AddDimension2(-0.02, 0.02, 0);
#endregion
#region 添加矩形长
SketchDoc.Extension.SelectByID2("", "SKETCHSEGMENT", -0.02, 0.04, 0, false, 0, null, 0);
SketchDoc.AddDimension2(0, 0.07, 0);
#endregion
#region 添加矩形高
SketchDoc.Extension.SelectByID2("", "SKETCHSEGMENT", 0.075, 0, 0, false, 0, null, 0);
SketchDoc.AddDimension2(0.09, 0, 0);
#endregion
SwSketchMrg.InsertSketch(true);//退出编辑草图模式
}
public void AddFeature(SldWorks SwApp, ModelDoc2 SwModel, Point2D P1, Point2D P2)
{
if (CheckUsing() == false)
{
return;
}
SwModel.ClearSelection2(true);
double L = P2.x - P1.x; // stage length
SketchManager sketchManager = SwModel.SketchManager;
FeatureManager featureManager = SwModel.FeatureManager;
Helper helper = new Helper(SwModel, SwApp);
helper.select_feature("RefPlane", 2, false, 0);
if (P1.x > 0)
// if x cordinat of first point is 0 we use stantart plane, else - make new refplane by offset
{
SwModel.CreatePlaneAtOffset(P1.x, false);
}
sketchManager.InsertSketch(true);
#region //Squre
if (keyProfileType == (object)"Squre") // make squre stage for key (out)
{
sketchManager.CreateCenterRectangle(0, 0, 0, (keyProfileWidth / 2),
(keyProfileWidth / 2), 0);
featureManager.FeatureCut3(true, true, true, 0, 0, L, 0,
false, false, false, false, 0, 0, false, false, false, false, false, true, true, true, true,
false, 0, 0, false); // add cut feature
}
#endregion
#region //Special
if (keyProfileType == (object)"Speacial") // make special stage for key (out)
{
double H = Math.Sqrt((Math.Pow((2 * P1.y), 2) - Math.Pow(keyProfileWidth, 2)));
sketchManager.Create3PointArc((keyProfileWidth / 2), (H / 2), 0,
(-1 * keyProfileWidth / 2), (H / 2), 0, 0, P1.y, 0); // Top arc
sketchManager.Create3PointArc((keyProfileWidth / 2), (-1 * H / 2), 0, (-1 * keyProfileWidth / 2),
(-1 * H / 2), 0, 0, (-1 * P1.y), 0); // Bottom arc
sketchManager.CreateLine((keyProfileWidth / 2), (H / 2), 0, (keyProfileWidth / 2),
(-1 * H / 2), 0); // Left line
sketchManager.CreateLine((-1 * keyProfileWidth / 2), (H / 2), 0, (-1 * keyProfileWidth / 2),
(-1 * H / 2), 0); // Rigth line
featureManager.FeatureCut3(true, true, true, 0, 0, L, 0,
false, false, false, false, 0, 0, false, false, false, false, false, true, true, true, true,
false, 0, 0, false); // add cut feature
sketchManager.InsertSketch(false);
}
#endregion
#region // Hexagon
if (keyProfileType == (object)"Hexagon") // make squre stage for key (out)
{
sketchManager.CreatePolygon(0, 0, 0, 0, P1.y, 0, 6, false);
featureManager.FeatureCut3(true, true, true, 0, 0, L, 0,
false, false, false, false, 0, 0, false, false, false, false, false, true, true, true, true,
false, 0, 0, false); // add cut feature
}
#endregion
helper.HidePlanes();
}
public void AddFeature(SldWorks SwApp, ModelDoc2 SwModel, Point2D P1, Point2D P2)
{
if (CheckUsing() == false)
{
return;
}
SwModel.ClearSelection2(true);
object[] seating_types = new[] { "None", "Prismatic A", "Prismatic B", "Segmented" };
object[] operations_types = new[] { "None", "Chamfer", "Fillet" }; // array of operation names
Helper helper = new Helper(SwModel, SwApp);
FeatureManager featureManager = SwModel.FeatureManager;
SketchManager sketchManager = SwModel.SketchManager;
SelectionMgr selectionMgr = (SelectionMgr)SwModel.SelectionManager;
Entity ent = default(Entity);
Array facesArray = default(Array);
Array edgesArray = default(Array);
Feature swFeature = default(Feature);
Face2 face2 = default(Face2); // neds to get edges of selected face
double LStage = 0;
double x_center = 0;
double y_center = 0;
double L = 0;
double W = 0;
bool append = false;
LStage = P2.x - P1.x; // length of current stage
x_center = P1.x + (LStage / 2) + seatingOffset; // center of current stage
y_center = 0;
L = x_center + seatingLength / 2;
W = seatingWidth / 2;
SwModel.ClearSelection2(true);
#region // make prismatic A keyseat
if (seatingType == seating_types[1]) //Prismatic A
{
helper.select_feature("RefPlane", 1, false, 0);
SwModel.CreatePlaneAtOffset(P1.y, false);
sketchManager.InsertSketch(true);
sketchManager.CreateCenterRectangle(x_center, y_center, 0, L, W, 0);
SwModel.FeatureManager.FeatureCut3(true, false, false, 0, 0, seatingDepth, 0,
false, false, false, false, 0, 0, false, false, false, false, false, true, true, true, true,
false, 0, 0, false); // add cut feature
if (seatingOpearationType != operations_types[0]) // add chamfer or fillet, if none or value is 0 - pass
{
swFeature = (Feature)selectionMgr.GetSelectedObject6(1, -1);
facesArray = (Array)swFeature.GetFaces();
ent = facesArray.GetValue(0) as Entity;
ent.Select4(false, null);
if (seatingOpearationType == operations_types[1])
{
featureManager.InsertFeatureChamfer(4, 1, seatingChamferFilletValue, helper.ToRad(45), 0, 0, 0,
0);
}
if (seatingOpearationType == operations_types[2])
{
SwModel.FeatureManager.FeatureFillet(195, seatingChamferFilletValue, 0,
0, null, null, null);
}
swFeature = selectionMgr.GetSelectedObject6(1, -1);
swFeature.Select2(false, 4); //create selection for pattern
append = true;
}
CreatePattern(helper, append, SwModel, swFeature, selectionMgr);
}
#endregion
#region // make prismatic B keyseat
if (seatingType == seating_types[2]) //Prismatic B
{
W = seatingWidth; //Width
helper.select_feature("RefPlane", 1, false, 0);
SwModel.CreatePlaneAtOffset(P1.y, false);
sketchManager.InsertSketch(true);
sketchManager.CreateSketchSlot((int)swSketchSlotCreationType_e.swSketchSlotCreationType_line,
(int)swSketchSlotLengthType_e.swSketchSlotLengthType_CenterCenter, W, L - seatingLength, 0, 0, L, 0,
0,
0, 0, 0, 1, false);
SwModel.FeatureManager.FeatureCut3(true, false, false, 0, 0, seatingDepth, 0,
false, false, false, false, 0, 0, false, false, false, false, false, true, true, true, true,
false, 0, 0, false);
if (seatingOpearationType != operations_types[0]) // add chamfer or fillet, if none or value is 0 - pass
{
swFeature = (Feature)selectionMgr.GetSelectedObject6(1, -1);
facesArray = (Array)swFeature.GetFaces();
ent = facesArray.GetValue(0) as Entity;
ent.Select4(false, null);
if (seatingOpearationType == operations_types[1])
{
featureManager.InsertFeatureChamfer(4, 1,
seatingChamferFilletValue, helper.ToRad(45), 0, 0, 0, 0);
}
if (seatingOpearationType == operations_types[2])
{
SwModel.FeatureManager.FeatureFillet(195, seatingChamferFilletValue, 0,
0, null, null, null);
}
swFeature = selectionMgr.GetSelectedObject6(1, -1);
swFeature.Select2(false, 4); //create selection for pattern
append = true;
}
CreatePattern(helper, append, SwModel, swFeature, selectionMgr);
}
#endregion
#region // make segmented seatkey
if (seatingType == seating_types[3]) //Segmented
{
helper.select_feature("RefPlane", 0, false, 0);
sketchManager.InsertSketch(true);
sketchManager.Create3PointArc(L - seatingLength, P1.y, 0, L, P1.y, 0, x_center, (P1.y - seatingDepth), 0);
sketchManager.CreateLine(L - seatingLength, P1.y, 0, L, P1.y, 0); //close sketsh
SwModel.FeatureManager.FeatureCut3(true, false, false, 6, 0, (seatingWidth), 0,
false, false, false, false, 0, 0, false, false, false, false, false, true, true, true, true,
false, 0, 0, false); //cut from mide plane
if (SeatingOpearationType != operations_types[0]) // add chamfer or fillet, if nono or value is 0 - pass
{
// select edges for chamfering or filleting
swFeature = (Feature)selectionMgr.GetSelectedObject6(1, -1);
facesArray = (Array)swFeature.GetFaces();
SelectData selectData = selectionMgr.CreateSelectData();
ent = facesArray.GetValue(2) as Entity;
ent.Select4(false, selectData);
face2 = selectionMgr.GetSelectedObject6(1, -1);
edgesArray = (Array)face2.GetEdges();
ent = edgesArray.GetValue(0) as Entity;
ent.Select4(false, null);
ent = edgesArray.GetValue(2) as Entity;
ent.Select4(true, null);
// select edges for chamfering or filleting
// MessageBox.Show("" + face2.GetEdgeCount());
if (seatingOpearationType == operations_types[1])
{
featureManager.InsertFeatureChamfer(4, 1, seatingChamferFilletValue, helper.ToRad(45), 0, 0, 0,
0);
}
if (seatingOpearationType == operations_types[2])
{
SwModel.FeatureManager.FeatureFillet(195, seatingChamferFilletValue, 0, 0, null, null, null);
}
swFeature = selectionMgr.GetSelectedObject6(1, -1);
swFeature.Select2(false, 4); //create selection for pattern
append = true;
}
CreatePattern(helper, append, SwModel, swFeature, selectionMgr);
}
#endregion
helper.HidePlanes();
}