internal RibbonPanelPopup(RibbonPanel panel)
{
DoubleBuffered = true;
_sensor = new RibbonMouseSensor(this, panel.Owner, panel.Items);
_sensor.PanelLimit = panel;
_panel = panel;
_panel.PopUp = this;
panel.Owner.SuspendSensor();
using (Graphics g = CreateGraphics())
{
panel.overflowBoundsBuffer = panel.Bounds;
Size s = panel.SwitchToSize(this, g, GetSizeMode(panel));
s.Width += 100;
s.Height += 100;
Size = s;
}
foreach (RibbonItem item in panel.Items)
{
item.SetCanvas(this);
}
}
public void addVRCommandButtons(RibbonPanel panel)
{
string thisAssemblyPath = Assembly.GetExecutingAssembly().Location;
////Set globel directory
var globePathOn = System.IO.Path.Combine(System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location), "Onbtn.gif");
var globePathOff = System.IO.Path.Combine(System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location), "Offbtn.gif");
//Large image button on
Uri uriImageOn = new Uri(globePathOn);
BitmapImage largeimageOn = new BitmapImage(uriImageOn);
//Large image button off
Uri uriImageOff = new Uri(globePathOff);
BitmapImage largeimageOff = new BitmapImage(uriImageOff);
//Create toggle buttons for radio button group.
//Image setup for buttons
ToggleButtonData toggleButtonDataON =
new ToggleButtonData("ViewCellAlignON", "ON\nAlign Cell", thisAssemblyPath, "SOM.RevitTools.AlignViewToSheetCell.UIDynamicUpdateOn");
ToggleButtonData toggleButtonDataOFF =
new ToggleButtonData("ViewCellAlignOFF", "OFF\nAlign Cell", thisAssemblyPath, "SOM.RevitTools.AlignViewToSheetCell.UIDynamicUpdateOff");
toggleButtonDataON.LargeImage = largeimageOn;
toggleButtonDataOFF.LargeImage = largeimageOff;
//Make dyn update on/off radio button group
RadioButtonGroupData radioBtnGroupData = new RadioButtonGroupData("Sheet View Organization");
RadioButtonGroup radioBtnGroup = panel.AddItem(radioBtnGroupData) as RadioButtonGroup;
radioBtnGroup.AddItem(toggleButtonDataON);
radioBtnGroup.AddItem(toggleButtonDataOFF);
}
static RibbonPanel AddOnePanel()
{
RibbonButton plotThisButton;
RibbonPanelSource rps = new RibbonPanelSource();
rps.Title = "Plotting";
RibbonPanel rp = new RibbonPanel();
rp.Source = rps;
//Create a Command Item that the Dialog Launcher can use,
// for this test it is just a place holder.
RibbonButton rci = new RibbonButton();
//rci.Name = "TestCommand";
//assign the Command Item to the DialgLauncher which auto-enables
// the little button at the lower right of a Panel
rps.DialogLauncher = rci;
plotThisButton = new RibbonButton();
plotThisButton.Name = "Plot";
plotThisButton.ShowText = true;
plotThisButton.Text = "Plot";
plotThisButton.CommandHandler = new MyRibbonCommandHandler();
plotThisButton.CommandParameter = "HelloWorld ";
//Add the Button to the Tab
rps.Items.Add(plotThisButton);
return rp;
}
public RibbonElementSizeMode GetSizeMode(RibbonPanel pnl)
{
if (pnl.FlowsTo == RibbonPanelFlowDirection.Right)
{
return RibbonElementSizeMode.Medium;
}
return RibbonElementSizeMode.Large;
}
private void AddPushButton(RibbonPanel panel)
{
PushButton pushButton = panel.AddItem(new PushButtonData("Export", "Export to Boldarc", this.AssemblyFullName, "BoldarcRevitPlugin.Activate")) as PushButton;
pushButton.ToolTip = "Export to Boldarc";
ContextualHelp contextualHelp = new ContextualHelp(0, "Boldarc support info goes here.");
pushButton.SetContextualHelp(contextualHelp);
//pushButton.set_LargeImage(Imaging.CreateBitmapSourceFromHBitmap(Resources.LogoBig.GetHbitmap(), IntPtr.Zero, Int32Rect.Empty, BitmapSizeOptions.FromEmptyOptions()));
//pushButton.set_Image(Imaging.CreateBitmapSourceFromHBitmap(Resources.LogoSmall.GetHbitmap(), IntPtr.Zero, Int32Rect.Empty, BitmapSizeOptions.FromEmptyOptions()));
}
public static void AddPanel(RibbonTab ribbonTab, RibbonPanel ribbonPanel)
{
if (ribbonTab.IsNull() ||
ribbonPanel.IsNull())
{
throw new ArgumentNullException();
}
ribbonTab.Panels.Add(ribbonPanel);
}
public void CreateView(RibbonPanel panel)
{
//This where we setup the command it's using in this case the HelloWorld.CS
PushButtonData pushButtondataHello = new PushButtonData("CreateView", "Update View Data", assemblyloca, "Application.ProjectSetup");
// This is how we add the button to our Panel
PushButton pushButtonHello = panel.AddItem(pushButtondataHello) as PushButton;
//This is how we add an Icon
//Make sure you reference WindowsBase and PresentationCore, and import System.Windows.Media.Imaging namespace.
pushButtonHello.LargeImage = new BitmapImage(new Uri(@"C:\Users\jay.dunn\AppData\Roaming\Autodesk\Revit\Addins\2014\Images\bulb.png"));
//Add a tooltip
pushButtonHello.ToolTip = "This tool Creates Views for all Levels in a Project";
}
//Control buttons for the dynamic model update
public void addVRCommandButtons(RibbonPanel panel)
{
string thisAssemblyPath = Assembly.GetExecutingAssembly().Location;
////Set globel directory
var globePathOn = System.IO.Path.Combine(System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location), "Onbtn.gif");
var globePathOff = System.IO.Path.Combine(System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location), "Offbtn.gif");
var globePathToolTipOn = System.IO.Path.Combine(System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location), "VRPreviewON.JPG");
var globePathToolTipOff = System.IO.Path.Combine(System.IO.Path.GetDirectoryName(System.Reflection.Assembly.GetExecutingAssembly().Location), "VRPreviewOff.JPG");
//Large image button on
Uri uriImageOn = new Uri(globePathOn);
BitmapImage largeimageOn = new BitmapImage(uriImageOn);
//Large image button off
Uri uriImageOff = new Uri(globePathOff);
BitmapImage largeimageOff = new BitmapImage(uriImageOff);
//Large image tool tip
Uri uriImageToolTipOn = new Uri(globePathToolTipOn);
BitmapImage largeimageToolTipOn = new BitmapImage(uriImageToolTipOn);
Uri uriImageToolTipOff = new Uri(globePathToolTipOff);
BitmapImage largeimageToolTipOff = new BitmapImage(uriImageToolTipOff);
//Create toggle buttons for radio button group.
//Image setup for buttons
ToggleButtonData toggleButtonDataON =
new ToggleButtonData("ViewportRenameON", "ON\nRename View", thisAssemblyPath, "SOM.RevitTools.ViewportRename.UIDynamicModelUpdateOn");
ToggleButtonData toggleButtonDataOFF =
new ToggleButtonData("ViewportRenameOFF", "OFF\nRename View", thisAssemblyPath, "SOM.RevitTools.ViewportRename.UIDynamicModelUpdateOff");
toggleButtonDataON.LargeImage = largeimageOn;
toggleButtonDataOFF.LargeImage = largeimageOff;
//Tooltip image setup
toggleButtonDataON.ToolTip = "Enable project organization by: \nSheet Number-Detail Number-Title on Sheet.";
toggleButtonDataON.ToolTipImage = largeimageToolTipOn;
toggleButtonDataOFF.ToolTip = "Disable or temporarily turn off View Rename add-in.";
toggleButtonDataOFF.ToolTipImage = largeimageToolTipOff;
//toggleButtonDataON.LongDescription = "<p>Hello,</p><p>I am RadioButtonGroup #1.</p><p>Regards,</p>";
//toggleButtonDataOFF.LongDescription = "<p>Hello,</p><p>I am RadioButtonGroup #1.</p><p>Regards,</p>";
//Make dyn update on/off radio button group
RadioButtonGroupData radioBtnGroupData = new RadioButtonGroupData("Project View Organization");
RadioButtonGroup radioBtnGroup = panel.AddItem(radioBtnGroupData) as RadioButtonGroup;
radioBtnGroup.AddItem(toggleButtonDataON);
radioBtnGroup.AddItem(toggleButtonDataOFF);
}
public void PullDown(RibbonPanel panel)
{
//creates a Push button for the get selection command
PushButtonData bgetselect = new PushButtonData("getselec", "Get Selection", assemblyloca, "Application.getSelection");
//creates a Push button for the get Collection command
PushButtonData bgetCollect = new PushButtonData("getcoll", "Get Collection", assemblyloca, "Application.getCollection");
//creates a pull down menu
PulldownButtonData pdb1 = new PulldownButtonData("WallsSelection","Wall Selector");
//assigns the pulldown menu to our panel
PulldownButton pdb = panel.AddItem(pdb1) as PulldownButton;
//adds the buttons above to the pulldown menu
pdb.AddPushButton(bgetselect);
pdb.AddPushButton(bgetCollect);
}
public void updateDoor(RibbonPanel panel)
{
//This where we setup the command it's using in this case the HelloWorld.CS
PushButtonData pushButtondataHello = new PushButtonData("updateDoor", "Update Door Data", assemblyloca, "Application.updateDoor");
// This is how we add the button to our Panel
PushButton pushButtonHello = panel.AddItem(pushButtondataHello) as PushButton;
//This is how we add an Icon
//Make sure you reference WindowsBase and PresentationCore, and import System.Windows.Media.Imaging namespace.
pushButtonHello.LargeImage = new BitmapImage(new Uri(@"C:\Users\Gytaco\AppData\Roaming\Autodesk\Revit\Addins\2014\Images\image.png"));
//Add a tooltip
pushButtonHello.ToolTip = "This tool updates the doors to contain ToRoom data in the comments parameter";
PushButtonData importTextbutton = new PushButtonData("importData", "Import Comments for Walls", assemblyloca, "Application.importData");
PushButton importText = panel.AddItem(importTextbutton) as PushButton;
}
public void ProcessRibbonBarButtons(RibbonBarContentItem item, RibbonPanel panel)
{
if (item == null) return;
RibbonBarBuilder builder = new RibbonBarBuilder(this);
item.AddRibbonBarButtons(builder);
Builders.Add(item, builder);
foreach (RibbonBar obj in builder.RibbonBars)
{
var group = ProcessGroup(obj);
panel.Controls.Add(group);
}
}
/// <summary>
/// Add buttons for our three commands
/// to the ribbon panel.
/// </summary>
void PopulatePanel( RibbonPanel p )
{
string path = Assembly.GetExecutingAssembly()
.Location;
RibbonItemData i1 = new PushButtonData(
"RvtVa3c_Command", "Va3c \r\n Export",
path, "RvtVa3c.Command" );
i1.ToolTip = "Export three.js JSON scene "
+ "for va3c AEC viewer";
//p.AddStackedItems( i1, i2, i3 );
p.AddItem( i1 );
}
internal RibbonPanelPopup(RibbonPanel panel)
{
DoubleBuffered = true;
Sensor = new RibbonSensor(this, panel.Owner, panel.OwnerTab) {PanelLimit = panel};
Panel = panel;
Panel.PopUp = this;
using (var g = CreateGraphics())
{
var s = panel.MeasureSize(this, new RibbonElementMeasureSizeEventArgs(g,
GetSizeMode(panel)));
Size = s;
panel.SetBounds(new Rectangle(0, 0, Size.Width, Size.Height));
panel.UpdateItemsRegions(g, GetSizeMode(panel));
}
foreach (var item in panel.Items)
{
item.SetCanvas(this);
}
}
public Result OnStartup(UIControlledApplication application)
{
// add new ribbon panel
application.CreateRibbonTab("Národní BIM knihovna");
_panel = application.CreateRibbonPanel("Národní BIM knihovna", "Nástroje");
_panel.Enabled = true;
//get assembly of this class to set the right path to other objects in this assembly
var assembly = Assembly.GetAssembly(this.GetType());
var assemblyPath = assembly.Location;
var dirPath = Path.GetDirectoryName(assemblyPath);
//-----------------------------BUTTONS FOR COMMANDS ----------------------------
var btnSettings = _panel.AddItem(new PushButtonData(
"GetObject",
"Vyhledávání",
assemblyPath,
"BimLibraryAddin.AddIns.ProductSearchAddIn"
)) as PushButton;
btnSettings.LargeImage = new BitmapImage(new Uri("pack://*****:*****@"Vyhledané objekty je možné importovat do aktuálního projektu a okamžitě použít.";
application.ControlledApplication.DocumentOpened += new EventHandler<DocumentOpenedEventArgs>(ControlledApplication_DocumentOpened);
application.ControlledApplication.DocumentCreated += new EventHandler<DocumentCreatedEventArgs>(ControlledApplication_DocumentCreating);
application.ControlledApplication.DocumentClosing += new EventHandler<DocumentClosingEventArgs>(ControlledApplication_DocumentClosing);
application.ControlledApplication.DocumentOpening += new EventHandler<DocumentOpeningEventArgs>(ControlledApplication_DocumentOpening);
//application.ControlledApplication.DocumentChanged += new EventHandler<DocumentChangedEventArgs>();
//register failures
Failures.RegisterFailures();
return Result.Succeeded;
}
/// <summary>
/// Adds the button to a specified ribbon panel.
/// </summary>
/// <param name="ribbonPanel">The ribbon panel.</param>
public void AddTo(RibbonPanel ribbonPanel)
{
AddTo(ribbonPanel, targetControlName: string.Empty, insertBeforeTargetControl: false);
}
protected virtual void InitCommands(RibbonPanel panel)
{
RibbonSeparator separator = new RibbonSeparator();
panel.Items.Add(separator);
}
/// <summary>
/// Add buttons for the commands we define in this labs.
/// Here we stack 2 x 2-push buttons and repeat it as we get more.
/// TBD: still thinking which version is better ...
/// </summary>
public void AddUILabsCommandButtons_v2(RibbonPanel panel)
{
// Get the location of this dll.
string assembly = GetType().Assembly.Location;
// Create push buttons to stack up
// #1
PushButtonData pushButtonData1 = new PushButtonData("UILabsSelection", "Pick Sampler", assembly, _uiLabName + ".UISelection");
pushButtonData1.Image = NewBitmapImage("basics.ico");
// #2
PushButtonData pushButtonData2 = new PushButtonData("UILabsCreateHouseUI", "Create House Pick", assembly, _uiLabName + ".CreateHouseUI");
pushButtonData2.Image = NewBitmapImage("basics.ico");
// #3
PushButtonData pushButtonData3 = new PushButtonData("UILabsTaskDialog", "Dialog Sampler", assembly, _uiLabName + ".UITaskDialog");
pushButtonData3.Image = NewBitmapImage("basics.ico");
// #4
PushButtonData pushButtonData4 = new PushButtonData("UILabsCreateHouseDialog", "Create House Dialog", assembly, _uiLabName + ".CreateHouseDialog");
pushButtonData4.Image = NewBitmapImage("basics.ico");
// Create 2 x 2-item stack.
IList<RibbonItem> stackedItems1 = panel.AddStackedItems(pushButtonData1, pushButtonData2);
IList<RibbonItem> stackedItems2 = panel.AddStackedItems(pushButtonData3, pushButtonData4);
}
public static void CreateUI(RibbonPanel ribbonPanel)
{
const string CommandName = "Rhino";
string CommandId = $"CustomCtrl_%CustomCtrl_%Add-Ins%{ribbonPanel.Name}%{typeof(CommandRhinoInside).Name}";
const string Shortcuts = "R#Ctrl+R";
var buttonData = NewPushButtonData <CommandRhinoInside, AllwaysAvailable>(CommandName);
if (ribbonPanel.AddItem(buttonData) is PushButton pushButton)
{
Button = pushButton;
if (Addin.RhinoVersionInfo == null)
{
pushButton.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, "https://www.rhino3d.com/download/rhino/wip"));
pushButton.Image = ImageBuilder.LoadBitmapImage("RhinoInside.Resources.Rhino-logo.png", true);
pushButton.LargeImage = ImageBuilder.LoadBitmapImage("RhinoInside.Resources.Rhino-logo.png");
}
else
{
pushButton.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, "https://www.rhino3d.com/inside"));
using (var icon = System.Drawing.Icon.ExtractAssociatedIcon(Addin.RhinoExePath))
{
pushButton.Image = icon.ToBitmapSource(true);
pushButton.LargeImage = icon.ToBitmapSource();
}
try
{
var versionInfo = Addin.RhinoVersionInfo;
pushButton.ToolTip = $"Loads {versionInfo.ProductName} inside this Revit session";
pushButton.LongDescription = $"{versionInfo.FileDescription} ({versionInfo.ProductVersion})\n{versionInfo.LegalCopyright}";
}
catch (Exception) { }
}
// Register keyboard shortcut
{
string keyboardShortcutsPath = Path.Combine(Revit.CurrentUsersDataFolderPath, "KeyboardShortcuts.xml");
if (!Revit.KeyboardShortcuts.LoadFrom(keyboardShortcutsPath, out var shortcuts))
{
shortcuts = new Revit.KeyboardShortcuts.Shortcuts();
}
try
{
var shortcutItem = shortcuts.Where(x => x.CommandId == CommandId).First();
if (shortcutItem.Shortcuts == null)
{
shortcutItem.Shortcuts = Shortcuts;
Rhinoceros.ModalScope.Exit += ModalScope_Exit;
}
}
catch (InvalidOperationException)
{
var shortcutItem = new Revit.KeyboardShortcuts.ShortcutItem()
{
CommandName = CommandName,
CommandId = CommandId,
Shortcuts = Shortcuts,
Paths = $"Add-Ins>{ribbonPanel.Name}"
};
shortcuts.Add(shortcutItem);
Rhinoceros.ModalScope.Exit += ModalScope_Exit;
}
Revit.KeyboardShortcuts.SaveAs(shortcuts, keyboardShortcutsPath);
}
}
}
public static void RoomsPanel(RibbonPanel panel)
{
// Add PRSPKT Rename Apart Rooms Button
var apartRoomsButtonText = "Переименовать \n помещения";
var apartRoomsData = new PushButtonData("cmdRenameApartRooms", apartRoomsButtonText, DllPath,
"RenameApartRooms.RenameApartRooms")
{
ToolTip = Tools.GetResourceManager("apartRoomRename_toolTip"),
LargeImage =
new BitmapImage(
new Uri("pack://application:,,,/PRSPKT_Apps;component/Resources/renameApartRooms.png"))
};
panel.AddItem(apartRoomsData);
// Add PRSPKT Rename Apart Rooms Button
var doRmButtonText = "Rm Сергею ОВ";
var doRMdata = new PushButtonData("cmdDoRM", doRmButtonText, DllPath, "Do_Rm.DoRmSergei")
{
ToolTip = "Проставить Rm_Этаж для Сергея ОВ",
LargeImage = new BitmapImage(new Uri("pack://application:,,,/PRSPKT_Apps;component/Resources/DoRM.png"))
};
panel.AddItem(doRMdata);
// Add PRSPKT ApartmentCalc Button New
var apartCalcPButtonText = "Квартирография";
var apartCalcPData = new PushButtonData("cmdApartCalc_P", apartCalcPButtonText, DllPath,
"ApartmentCalc_P.ApartmentCalc_P")
{
ToolTip = Tools.GetResourceManager("apartCalc_toolTip"),
LargeImage =
new BitmapImage(new Uri("pack://application:,,,/PRSPKT_Apps;component/Resources/apartCalc_new.png"))
};
panel.AddItem(apartCalcPData);
// Add PRSPKT FloorFinish button
var floorFinishButtonText = Tools.GetResourceManager("floorfinish_button_name");
var floorFinishData = new PushButtonData("cmdFloorsFinish", floorFinishButtonText, DllPath,
"RoomsFinishes.FloorsFinishesClass")
{
ToolTip = Tools.LangResMan.GetString("floorfinish_toolTip", Tools.Cult),
LargeImage =
new BitmapImage(new Uri("pack://application:,,,/PRSPKT_Apps;component/Resources/floorFinish.png"))
};
// Add PRSPKT RoomFinish button
var roomFinishesButtonText = Tools.GetResourceManager("roomFinishes_button_name");
var roomsFinishesData = new PushButtonData("cmdRoomFinish", roomFinishesButtonText, DllPath,
"RoomsFinishes.RoomFinishesClass")
{
ToolTip = Tools.LangResMan.GetString("roomFinishes_toolTip", Tools.Cult),
LargeImage =
new BitmapImage(new Uri("pack://application:,,,/PRSPKT_Apps;component/Resources/roomFinish.png"))
};
// Group RoomsFinishes button
var sbRoomData = new SplitButtonData("room", "PRSPKT_Apps");
if (!(panel.AddItem(sbRoomData) is SplitButton sbRoom))
{
return;
}
sbRoom.AddPushButton(floorFinishData);
sbRoom.AddPushButton(roomsFinishesData);
}
protected override void InitViewCommands(RibbonPanel panel)
{
RibbonButton btnMaximizeNotes = new RibbonButton("Maximize Notes View");
panel.Items.Add(btnMaximizeNotes);
btnMaximizeNotes.Image = Properties.Resources.MaximizeNotes;
btnMaximizeNotes.SmallImage = Properties.Resources.MaximizeNotes;
btnMaximizeNotes.Click += new EventHandler(OnMaximizeNotes_Clicked);
btnMaximizeNotes.MouseEnter += _views.MainForm.RibbonButton_MouseEnter;
RibbonButton btnNotesSeparateWindow = new RibbonButton("Open Notes in Window");
panel.Items.Add(btnNotesSeparateWindow);
btnNotesSeparateWindow.Image = Properties.Resources.NotesSeparateWindow;
btnNotesSeparateWindow.SmallImage = Properties.Resources.NotesSeparateWindow;
btnNotesSeparateWindow.Click += new EventHandler(OnNotesSeparateWindow_Clicked);
btnNotesSeparateWindow.MouseEnter += _views.MainForm.RibbonButton_MouseEnter;
_btnToggleNotesBottom = new RibbonButton("Notes at Bottom");
panel.Items.Add(_btnToggleNotesBottom);
_btnToggleNotesBottom.Image = Properties.Resources.notes_down;
_btnToggleNotesBottom.SmallImage = Properties.Resources.notes_down;
_btnToggleNotesBottom.Click += new EventHandler(OnToggleNotesBottom_Clicked);
_btnToggleNotesBottom.MouseEnter += _views.MainForm.RibbonButton_MouseEnter;
RibbonButton btnResetView = new RibbonButton("Reset View");
panel.Items.Add(btnResetView);
btnResetView.Image = Properties.Resources.ResetView;
btnResetView.SmallImage = Properties.Resources.ResetView;
btnResetView.Click += new EventHandler(OnResetView_Clicked);
btnResetView.MouseEnter += _views.MainForm.RibbonButton_MouseEnter;
panel.Items.Add(new RibbonSeparator());
_btnLayout1 = new RibbonButton("Layout 1");
panel.Items.Add(_btnLayout1);
_btnLayout1.Image = Properties.Resources.ResetView;
_btnLayout1.SmallImage = Properties.Resources.ResetView;
_btnLayout1.Click += new EventHandler(OnLayout1_Clicked);
_btnLayout1.MouseEnter += _views.MainForm.RibbonButton_MouseEnter;
_btnLayout2 = new RibbonButton("Layout 2");
panel.Items.Add(_btnLayout2);
_btnLayout2.Image = Properties.Resources.ResetView;
_btnLayout2.SmallImage = Properties.Resources.ResetView;
_btnLayout2.Click += new EventHandler(OnLayout2_Clicked);
_btnLayout2.MouseEnter += _views.MainForm.RibbonButton_MouseEnter;
panel.Items.Add(new RibbonSeparator());
RibbonButton btnSnomedct = new RibbonButton("Snomedct");
panel.Items.Add(btnSnomedct);
btnSnomedct.Image = Properties.Resources.View;
btnSnomedct.SmallImage = Properties.Resources.View;
btnSnomedct.Click += btnSnomedct_Click;
btnSnomedct.MouseEnter += _views.MainForm.RibbonButton_MouseEnter;
panel.Items.Add(new RibbonSeparator());
RibbonButton btnHelp = new RibbonButton("RegExp Help");
panel.Items.Add(btnHelp);
btnHelp.Image = Properties.Resources.HelpIcon;
btnHelp.SmallImage = Properties.Resources.HelpIcon;
btnHelp.Click += btnHelp_Click;
btnHelp.MouseEnter += _views.MainForm.RibbonButton_MouseEnter;
///////////////////////////////////////////////////////////////////////////////
/*RibbonButton btnPerformance = new RibbonButton("TEST UPDATE");
* _panel.Items.Add(btnPerformance);
* btnPerformance.Click += (sender, args) => { new Forms.Performance(_views).ShowDialog(); };
* btnPerformance.MouseEnter += _views.MainForm.RibbonButton_MouseEnter;*/
}
public Result OnStartup(UIControlledApplication application)
{
#region Events
//application.ControlledApplication.DocumentOpened += docOpenedHandler;
//application.ControlledApplication.DocumentClosing += docClosingHandler;
#endregion
#region Create Ribbon Panel
RibbonPanel ribbonPanel =
application.CreateRibbonPanel(Tab.AddIns, PANEL_NAME);
#endregion
#region Push Buttons
PushButton pbSplitter = ribbonPanel
.AddItem(new PushButtonData
("Splitter", "Splitter", ASSEMBLY_PATH,
"TektaRevitPlugins.SplitterCmd")) as PushButton;
pbSplitter.LargeImage =
BmpImageSource("TektaRevitPlugins.Resources.axe_32x32.png");
pbSplitter.Image =
BmpImageSource("TektaRevitPlugins.Resources.axe_16x16.png");
PushButton pbFontReplacer = ribbonPanel.AddItem(
new PushButtonData("Font Replacer", "Font Replacer", ASSEMBLY_PATH,
"TektaRevitPlugins.FontReplacerCmd")) as PushButton;
pbFontReplacer.LargeImage =
BmpImageSource("TektaRevitPlugins.Resources.replacer_32x32.png");
pbFontReplacer.Image =
BmpImageSource("TektaRevitPlugins.Resources.replacer_16x16.png");
PushButton pbParametersHandler = ribbonPanel.AddItem(
new PushButtonData("Parameter Handler", "Parameter Handler", ASSEMBLY_PATH,
"TektaRevitPlugins.SpHandlerCmd")) as PushButton;
pbParametersHandler.LargeImage =
BmpImageSource("TektaRevitPlugins.Resources.export_32x32.png");
pbParametersHandler.Image =
BmpImageSource("TektaRevitPlugins.Resources.export_16x16.png");
#endregion
#region Split Buttons
PushButtonData pbdRebarCollector =
new PushButtonData("Rebar Collector", "Rebar Collector", ASSEMBLY_PATH,
"TektaRevitPlugins.RebarCollectorCmd");
pbdRebarCollector.LargeImage =
BmpImageSource("TektaRevitPlugins.Resources.rebar_32x32.png");
pbdRebarCollector.Image =
BmpImageSource("TektaRevitPlugins.Resources.rebar_16x16.png");
PushButtonData pbdRebarMarker =
new PushButtonData("Rebar Marker", "Rebar Marker", ASSEMBLY_PATH,
"TektaRevitPlugins.RebarMarkerCmd");
pbdRebarMarker.LargeImage =
BmpImageSource("TektaRevitPlugins.Resources.tag_32x32.png");
pbdRebarMarker.Image =
BmpImageSource("TektaRevitPlugins.Resources.tag_16x16.png");
PushButtonData pbdScheduleGenerator =
new PushButtonData("Schedule Generator", "Schedule Generator", ASSEMBLY_PATH,
"TektaRevitPlugins.Multischedule.CmdConstructMultischedule");
pbdScheduleGenerator.LargeImage =
BmpImageSource("TektaRevitPlugins.Resources.schedule_32x32.png");
pbdScheduleGenerator.Image =
BmpImageSource("TektaRevitPlugins.Resources.schedule_16x16.png");
PushButtonData pbdUpdateRepository =
new PushButtonData("Generate/Update Repository", "Generate/Update Repository", ASSEMBLY_PATH,
"TektaRevitPlugins.UpdateRepository");
pbdUpdateRepository.LargeImage =
BmpImageSource("TektaRevitPlugins.Resources.sync_32x32.png");
pbdUpdateRepository.Image =
BmpImageSource("TektaRevitPlugins.Resources.sync_16x16.png");
SplitButton sbRebarCmds =
ribbonPanel.AddItem(new SplitButtonData(
"Rebar Commands", "Reinfrocement")) as SplitButton;
sbRebarCmds.AddPushButton(pbdRebarCollector);
sbRebarCmds.AddPushButton(pbdRebarMarker);
sbRebarCmds.AddPushButton(pbdScheduleGenerator);
sbRebarCmds.AddPushButton(pbdUpdateRepository);
PushButtonData pbdExcelExporter = new PushButtonData
("Excel Exporter", "Excel Exporter", ASSEMBLY_PATH,
"TektaRevitPlugins.ExcelExporterCmd");
pbdExcelExporter.LargeImage =
BmpImageSource("TektaRevitPlugins.Resources.excel_32x32.png");
pbdExcelExporter.Image =
BmpImageSource("TektaRevitPlugins.Resources.excel_16x16.png");
PushButtonData pbdSheetSelector = new PushButtonData
("PDF Printer", "PDF Printer", ASSEMBLY_PATH,
"TektaRevitPlugins.SheetSelectorCmd");
pbdSheetSelector.LargeImage =
BmpImageSource("TektaRevitPlugins.Resources.pdf_32x32.png");
pbdSheetSelector.Image =
BmpImageSource("TektaRevitPlugins.Resources.pdf_16x16.png");
SplitButton sbExportCmds =
ribbonPanel.AddItem(new SplitButtonData(
"Export Commands", "Export Commands")) as SplitButton;
sbExportCmds.AddPushButton(pbdExcelExporter);
sbExportCmds.AddPushButton(pbdSheetSelector);
PushButtonData pbdRoomNamer =
new PushButtonData("Room Namer", "Room Namer", ASSEMBLY_PATH,
"TektaRevitPlugins.RoomNamerCmd");
pbdRoomNamer.LargeImage =
BmpImageSource("TektaRevitPlugins.Resources.reroom_32x32.png");
pbdRoomNamer.Image =
BmpImageSource("TektaRevitPlugins.Resources.reroom_16x16.png");
PushButtonData pbdHeightsMarker =
new PushButtonData("Heights Marker", "Heights Marker", ASSEMBLY_PATH,
"TektaRevitPlugins.MarkHeightsCmd");
pbdHeightsMarker.LargeImage =
BmpImageSource("TektaRevitPlugins.Resources.height_32x32.png");
pbdHeightsMarker.Image =
BmpImageSource("TektaRevitPlugins.Resources.height_16x16.png");
PushButtonData pdCalculateFlatArea =
new PushButtonData("Flat Area Calculator", "Flat Area Calculator", ASSEMBLY_PATH,
"TektaRevitPlugins.CalculateFlatAreaCmd");
pdCalculateFlatArea.LargeImage =
BmpImageSource("TektaRevitPlugins.Resources.calculator_32x32.png");
pdCalculateFlatArea.Image =
BmpImageSource("TektaRevitPlugins.Resources.calculator_16x16.png");
PushButtonData pdMhbkFlatHandler =
new PushButtonData("MHBK Flat Handler", "MHBK Flat Handler", ASSEMBLY_PATH,
"TektaRevitPlugins.RoomAreasHandlerCmd");
pdMhbkFlatHandler.LargeImage =
BmpImageSource("TektaRevitPlugins.Resources.calculator_32x32.png");
pdMhbkFlatHandler.Image =
BmpImageSource("TektaRevitPlugins.Resources.calculator_16x16.png");
pdMhbkFlatHandler.AvailabilityClassName = "TektaRevitPlugins.FlatHandlerAvailability";
PushButtonData pbdTagElements =
new PushButtonData("Tag Elements", "Tag Elements", ASSEMBLY_PATH,
"TektaRevitPlugins.TagElemsCmd");
pbdTagElements.LargeImage =
BmpImageSource("TektaRevitPlugins.Resources.tag_32x32.png");
pdCalculateFlatArea.Image =
BmpImageSource("TektaRevitPlugins.Resources.tag_16x16.png");
PushButtonData pbdDoorSwingDirection =
SpecifyPushButtonData("Swing Direction", "Swing Direction",
ASSEMBLY_PATH, "TektaRevitPlugins.Commands.DoorSwingDetectorCmd",
"TektaRevitPlugins.Resources.door_swing_32x32.png",
"TektaRevitPlugins.Resources.door_swing_16x16.png");
PushButtonData pbdCopyValues =
SpecifyPushButtonData("Copy Values", "Copy Values",
ASSEMBLY_PATH, "TektaRevitPlugins.CpValuesCmd",
"TektaRevitPlugins.Resources.copy_32x32.png",
"TektaRevitPlugins.Resources.copy_16x16.png");
PushButtonData pbdBlkLvlId =
SpecifyPushButtonData("Room Data", "Room Data",
ASSEMBLY_PATH, "TektaRevitPlugins.Commands.BlockLevelIdentifierCmd",
"TektaRevitPlugins.Resources.calculator_32x32.png",
"TektaRevitPlugins.Resources.calculator_16x16.png");
PushButtonData pbdBEnumValues =
SpecifyPushButtonData("Enumerate Values", "Enumerate Values",
ASSEMBLY_PATH, "TektaRevitPlugins.Commands.EnumValuesCmd",
"TektaRevitPlugins.Resources.numbers_32x32.png",
"TektaRevitPlugins.Resources.numbers_16x16.png");
// Split Buttons
SplitButton sbArchCmds =
ribbonPanel.AddItem(new SplitButtonData(
"Arch Commands", "Arch Commands")) as SplitButton;
sbArchCmds.AddPushButton(pbdRoomNamer);
sbArchCmds.AddPushButton(pbdHeightsMarker);
sbArchCmds.AddPushButton(pdCalculateFlatArea);
sbArchCmds.AddPushButton(pdMhbkFlatHandler);
sbArchCmds.AddPushButton(pbdTagElements);
sbArchCmds.AddPushButton(pbdDoorSwingDirection);
sbArchCmds.AddPushButton(pbdCopyValues);
sbArchCmds.AddPushButton(pbdBlkLvlId);
sbArchCmds.AddPushButton(pbdBEnumValues);
#endregion
#region Register Updaters
#endregion
return(Result.Succeeded);
}
private void InitPane()
{
var panel = new RibbonPanel("Default");
var btnCopyToRight = new RibbonButton("Copy to right");
panel.Items.Add(btnCopyToRight);
btnCopyToRight.Click += btnCopyToRight_Click;
btnCopyToRight.Image = Properties.Resources.right_normal;
btnCopyToRight.SmallImage = Properties.Resources.right_normal;
var btnCopyToLeft = new RibbonButton("Copy to left");
panel.Items.Add(btnCopyToLeft);
btnCopyToLeft.Click += btnCopyToLeft_Click;
btnCopyToLeft.Image = Properties.Resources.left_normal;
btnCopyToLeft.SmallImage = Properties.Resources.left_normal;
var delimiter1 = new RibbonSeparator();
panel.Items.Add(delimiter1);
btnSaveLeft = new RibbonButton("Save left");
panel.Items.Add(btnSaveLeft);
btnSaveLeft.Click += btnSaveLeft_Click;
btnSaveLeft.Image = Properties.Resources.Save;
btnSaveLeft.SmallImage = Properties.Resources.Save;
btnSaveLeft.Enabled = false;
btnSaveRight = new RibbonButton("Save right");
panel.Items.Add(btnSaveRight);
btnSaveRight.Click += btnSaveRight_Click;
btnSaveRight.Image = Properties.Resources.Save;
btnSaveRight.SmallImage = Properties.Resources.Save;
btnSaveRight.Enabled = false;
btnSaveAll = new RibbonButton("Save all");
panel.Items.Add(btnSaveAll);
btnSaveAll.Click += btnSaveAll_Click;
btnSaveAll.Image = Properties.Resources.SaveAll;
btnSaveAll.SmallImage = Properties.Resources.SaveAll;
btnSaveAll.Enabled = false;
var delimiter = new RibbonSeparator();
panel.Items.Add(delimiter);
var btnRecalculate = new RibbonButton("Re-calculate");
panel.Items.Add(btnRecalculate);
btnRecalculate.Click += btnRecalculate_Click;
btnRecalculate.Image = Properties.Resources.CalcScores;
btnRecalculate.SmallImage = Properties.Resources.CalcScores;
this.ribbonTabMain.Panels.Add(panel);
this.splitContainer.SplitterDistance = this.Width / 2;
}
public void CreateCivil3DRibbon()
{
Autodesk.Windows.RibbonTab rbnTab = new Autodesk.Windows.RibbonTab();
rbnTab.Title = "Beca";
rbnTab.Id = "Civil3d";
Autodesk.Windows.RibbonPanelSource panlSourceAus = new Autodesk.Windows.RibbonPanelSource();
panlSourceAus.Title = "Australia";
Autodesk.Windows.RibbonButton rbnSignAus = new Autodesk.Windows.RibbonButton();
//rbnSignAus.Text = "Signs";
rbnSignAus.ShowText = true;
rbnSignAus.ShowImage = true;
rbnSignAus.Image = Images.getBitmap(Properties.Resources.Signs);
rbnSignAus.LargeImage = Images.getBitmap(Properties.Resources.Signs);
rbnSignAus.Size = RibbonItemSize.Large;
rbnSignAus.CommandHandler = new AusSignCommandHandler();
rbnSignAus.CommandParameter = "AusSign";
rbnSignAus.Orientation = System.Windows.Controls.Orientation.Horizontal;
rbnSignAus.Width = 500;
panlSourceAus.Items.Add(rbnSignAus);
Autodesk.Windows.RibbonRowBreak rowBreak = new RibbonRowBreak();
panlSourceAus.Items.Add(rowBreak);
Autodesk.Windows.RibbonButton rbnRoadSignAus = new Autodesk.Windows.RibbonButton();
//rbnRoadSignAus.Text = "Road Markings";
rbnRoadSignAus.ShowText = true;
rbnRoadSignAus.ShowImage = true;
rbnRoadSignAus.Image = Images.getBitmap(Properties.Resources.Road_Markings);
rbnRoadSignAus.LargeImage = Images.getBitmap(Properties.Resources.Road_Markings);
rbnRoadSignAus.Size = RibbonItemSize.Large;
rbnRoadSignAus.CommandParameter = "AusRoadSign";
rbnRoadSignAus.CommandHandler = new AusSignCommandHandler();
rbnRoadSignAus.Orientation = System.Windows.Controls.Orientation.Horizontal;
rbnRoadSignAus.Width = 500;
panlSourceAus.Items.Add(rbnRoadSignAus);
Autodesk.Windows.RibbonPanel rbnPanelAus = new RibbonPanel();
rbnPanelAus.Source = panlSourceAus;
rbnTab.Panels.Add(rbnPanelAus);
Autodesk.Windows.RibbonPanelSource panlSourceNZ = new Autodesk.Windows.RibbonPanelSource();
panlSourceNZ.Title = "Newzeland";
Autodesk.Windows.RibbonButton rbnSignNZ = new Autodesk.Windows.RibbonButton();
//rbnSignNZ.Text = "Signs";
rbnSignNZ.ShowText = true;
rbnSignNZ.ShowImage = true;
rbnSignNZ.Image = Images.getBitmap(Properties.Resources.Signs);
rbnSignNZ.LargeImage = Images.getBitmap(Properties.Resources.Signs);
rbnSignNZ.Size = RibbonItemSize.Large;
rbnSignNZ.CommandParameter = "NZSign";
rbnSignNZ.CommandHandler = new AusSignCommandHandler();
rbnSignNZ.Orientation = System.Windows.Controls.Orientation.Horizontal;
rbnSignNZ.Width = 500;
panlSourceNZ.Items.Add(rbnSignNZ);
Autodesk.Windows.RibbonRowBreak rowBreakNZ = new RibbonRowBreak();
panlSourceNZ.Items.Add(rowBreakNZ);
Autodesk.Windows.RibbonButton rbnRoadSignNZ = new Autodesk.Windows.RibbonButton();
//rbnRoadSignNZ.Text = "Road Markings";
rbnRoadSignNZ.ShowText = true;
rbnRoadSignNZ.ShowImage = true;
rbnRoadSignNZ.Image = Images.getBitmap(Properties.Resources.Road_Markings);
rbnRoadSignNZ.LargeImage = Images.getBitmap(Properties.Resources.Road_Markings);
rbnRoadSignNZ.Size = RibbonItemSize.Large;
rbnRoadSignNZ.CommandParameter = "NZRoadSign";
rbnRoadSignNZ.CommandHandler = new AusSignCommandHandler();
rbnRoadSignNZ.Orientation = System.Windows.Controls.Orientation.Horizontal;
rbnRoadSignNZ.Width = 500;
panlSourceNZ.Items.Add(rbnRoadSignNZ);
Autodesk.Windows.RibbonPanel rbnPanelNZ = new RibbonPanel();
rbnPanelNZ.Source = panlSourceNZ;
rbnTab.Panels.Add(rbnPanelNZ);
rbnTab.IsActive = true;
Autodesk.Windows.ComponentManager.Ribbon.Tabs.Add(rbnTab);
}
public void AddTCOMDrops_WTA_TCOM_Ribbon(UIControlledApplication a)
{
string ExecutingAssemblyPath = System.Reflection.Assembly.GetExecutingAssembly().Location;
string ExecutingAssemblyName = System.Reflection.Assembly.GetExecutingAssembly().GetName().Name;
// create ribbon tab
String thisNewTabName = "WTA-TCOM";
try {
a.CreateRibbonTab(thisNewTabName);
} catch (Autodesk.Revit.Exceptions.ArgumentException) {
// Assume error generated is due to "WTA" already existing
}
// Create a push button in the ribbon panel
//PushButtonData pbData = new PushButtonData("QVis", " QVis ", ExecutingAssemblyPath, ExecutingAssemblyName + ".QVisCommand");
// Add new ribbon panel.
String thisNewPanelName = "TCOM Drops";
RibbonPanel thisNewRibbonPanelTCOM = a.CreateRibbonPanel(thisNewTabName, thisNewPanelName);
// add button to ribbon panel
//PushButton pushButton = thisNewRibbonPanel.AddItem(pbData) as PushButton;
// Set the large image shown on button
//Note that the full image name is namespace_prefix + "." + the actual imageName);
//pushButton.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".QVis.png");
// provide button tips
//pushButton.ToolTip = "Floats a form with buttons to toggle visibilities.";
//pushButton.LongDescription = "On this form, the way the buttons look indicate the current visibility status.";
// Create push button in this ribbon panel
PushButtonData pbData2DH = new PushButtonData("2D H", "2D H", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceTComDrop2DHInstance");
PushButtonData pbData4DH = new PushButtonData("4D H", "4D H", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceTComDrop4DHInstance");
PushButtonData pbDataAPH = new PushButtonData("AP H", "AP H", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceTComDropAPHInstance");
PushButtonData pbData2DN = new PushButtonData(" 2D F ", " 2D F ", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceTComDrop2DNHInstance");
PushButtonData pbData4DN = new PushButtonData(" 4D F ", " 4D F ", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceTComDrop4DNHInstance");
PushButtonData pbDataAPN = new PushButtonData(" AP F ", " AP F ", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdPlaceTComDropAPNHInstance");
PushButtonData pbData2PTTAG = new PushButtonData(" 2PT\nTag ", " 2PT\nTag ", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdTwoPickTag");
PushButtonData pbDataMtchTAG = new PushButtonData(" Match\nTag ", " Match\nTag ", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdMatchParamterForTCOMDropTag");
// Set the large image shown on button
//Note that the full image name is namespace_prefix + "." + the actual imageName);
pbData2PTTAG.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TagDrop.png");
pbDataMtchTAG.LargeImage = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".MtchTagDrop.png");
pbData2DN.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TagDrop2Dsmall.png");
pbData2DH.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TagDrop2Dsmall.png");
pbData4DN.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TagDrop4Dsmall.png");
pbData4DH.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TagDrop4Dsmall.png");
pbDataAPN.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TagDropAPsmall.png");
pbDataAPH.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".TagDropAPsmall.png");
// add button tips (when data, must be defined prior to adding button.)
pbData2DH.ToolTip = "2D Hosted Drop";
pbData4DH.ToolTip = "4D Hosted Drop";
pbDataAPH.ToolTip = "AP Hosted Drop";
pbData2DN.ToolTip = "2D Non Hosted (Free) Drop";
pbData4DN.ToolTip = "4D Non Hosted (Free) Drop";
pbDataAPN.ToolTip = "AP Non Hosted (Free) Drop";
pbData2PTTAG.ToolTip = "Tag a drop with two picks.";
pbDataMtchTAG.ToolTip = "Match one tag value to another.";
string lDesc = " => Places a drop of the INSTANCE value indicated and then prompts for the TAG location.\n\n\u00A7Workset will be TCOM.";
string lDesc2PTTAG = " => Tags an existing drop with two picks.\nFirst pick selects drop.\nSecond pick is tag location.\nPress ESC to exit the command.";
string lDescMtchTAG = " => Matches the drop instance tag value by first picking the example tag and then picking the target drop instances.\nPress ESC to exit the command.";
pbData2DH.LongDescription = pbData2DH.ToolTip + lDesc;
pbData4DH.LongDescription = pbData4DH.ToolTip + lDesc;
pbDataAPH.LongDescription = pbDataAPH.ToolTip + lDesc;
pbData2DN.LongDescription = pbData2DN.ToolTip + lDesc;
pbData4DN.LongDescription = pbData4DN.ToolTip + lDesc;
pbDataAPN.LongDescription = pbDataAPN.ToolTip + lDesc;
pbData2PTTAG.LongDescription = lDesc2PTTAG;
pbDataMtchTAG.LongDescription = lDescMtchTAG;
// add button to ribbon panel
thisNewRibbonPanelTCOM.AddItem(pbData2PTTAG);
List <RibbonItem> projectButtons = new List <RibbonItem>();
projectButtons.AddRange(thisNewRibbonPanelTCOM.AddStackedItems(pbData2DH, pbData4DH, pbDataAPH));
projectButtons.AddRange(thisNewRibbonPanelTCOM.AddStackedItems(pbData2DN, pbData4DN, pbDataAPN));
thisNewRibbonPanelTCOM.AddItem(pbDataMtchTAG);
/// Once there is a slideout, all new items go in it.
/// It is not possbile to get back to the panel panel.
thisNewRibbonPanelTCOM.AddSlideOut();
#region TCOM Info
PushButtonData bInfoTCOM = new PushButtonData("Info", "Info", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdOpenDocFolder");
bInfoTCOM.ToolTip = "See the TCOM help document.";
bInfoTCOM.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".InfoSm.png");
#endregion
#region pbTCOMSettings
PushButtonData pbTCOMSettings = new PushButtonData("TCOMSet", "TCOM Settings", ExecutingAssemblyPath, ExecutingAssemblyName + ".CmdTCOMSettings");
pbTCOMSettings.Image = NewBitmapImage(System.Reflection.Assembly.GetExecutingAssembly(), ExecutingAssemblyName + ".WTATabs.png");
pbTCOMSettings.ToolTip = "Set TCOM Settings - like Tags in the companion view.";
#endregion
List <RibbonItem> slideOutPanelButtons = new List <RibbonItem>();
slideOutPanelButtons.AddRange(thisNewRibbonPanelTCOM.AddStackedItems(bInfoTCOM, pbTCOMSettings));
} // AddTCOMDrops_WTA-TCOM_Ribbon
public void CreateTab(UIControlledApplication application)
{
OATools.App oatoolsApp = new OATools.App();
string oaToolsAssembly = oatoolsApp.returnAssembly();
OATools.ViewFilters.Command viewFiltersApp = new OATools.ViewFilters.Command();
string viewFiltersAssembly = viewFiltersApp.returnAssembly();
OATools.ParameterTools.Command parameterToolsApp = new OATools.ParameterTools.Command();
string parameterToolsAssembly = parameterToolsApp.returnAssembly();
//OAToolsUpdater.App updaterApp = new OAToolsUpdater.App();
//string updaterAssembly = updaterApp.returnAssembly();
//Try to build the ribbon tab and load all resources
try
{
//return the assembly
System.Reflection.Assembly exe;
exe = System.Reflection.Assembly.GetExecutingAssembly();
//Create a ribbon Tab
String tabName = "O/A Tools";
application.CreateRibbonTab(tabName);
//--------------
// Add the A ribbon panel
RibbonPanel ribbonPanelA = application.CreateRibbonPanel(tabName, "Common Tools");
// Create push button to trigger a command
PushButtonData A1 = new PushButtonData("Text 2 Upper", "Text 2 Upper", oaToolsAssembly, "OATools.ConvertTextNotes.cmdConvertTextNotes");
A1.ToolTip = "Load the table family and " + "place table instances";
A1.Image = NewBitmapImage(exe, "icon-text.ico");
// Create push button to trigger a command
PushButtonData A2 = new PushButtonData("Project Parameters", "Project Parameters", viewFiltersAssembly, "BuildingCoder.CmdProjectParameterGuids");
A2.ToolTip = "Load the table family and " + "place table instances";
A2.Image = NewBitmapImage(exe, "icon-grid.ico");
// Create push button to trigger a command
PushButtonData A3 = new PushButtonData("View Filters2", "View Filters2", viewFiltersAssembly, "OATools.ViewFilters.Command");
A3.ToolTip = "Load the table family and " + "place table instances";
A3.Image = NewBitmapImage(exe, "icon-grid.ico");
// Add the buttons to the panel
List <RibbonItem> projectButtonsA = new List <RibbonItem>();
projectButtonsA.AddRange(ribbonPanelA.AddStackedItems(A1, A2, A3));
//--------------
//--------------
// Add the B ribbon panel
RibbonPanel ribbonPanelB = application.CreateRibbonPanel(tabName, "Parameter Tools");
// Create push button to trigger a command
PushButtonData B1 = new PushButtonData("P Cast", "P Cast", parameterToolsAssembly, "OATools.ParameterTools.cmdPCast");
B1.ToolTip = "Load the table family and " + "place table instances";
B1.LargeImage = NewBitmapImage(exe, "icon-text.ico");
//Add the button to ribbon
PushButton pushButtondB1 = ribbonPanelB.AddItem(B1) as PushButton;
//// Create push button to trigger a command
//PushButtonData B1 = new PushButtonData("Project Parameters", "Project Parameters", viewFiltersAssembly, "OATools.ViewFilters.cmdProjectParameters");
//B1.ToolTip = "Load the table family and " + "place table instances";
//B1.Image = NewBitmapImage(exe, "icon-text.ico");
// Create push button to trigger a command
//PushButtonData B2 = new PushButtonData("SelectedElement", "SelectedElement", viewFiltersAssembly, "OATools.ViewFilters.cmdSelectedElementParameters");
//B2.ToolTip = "Load the table family and " + "place table instances";
//B2.Image = NewBitmapImage(exe, "icon-grid.ico");
//// Create push button to trigger a command
//PushButtonData B3 = new PushButtonData("none3", "none3", viewFiltersAssembly, "OATools.ViewFilters.Command3");
//B3.ToolTip = "Load the table family and " + "place table instances";
//B3.Image = NewBitmapImage(exe, "icon-grid.ico");
//// Add the buttons to the panel
//List<RibbonItem> projectButtonsB = new List<RibbonItem>();
//projectButtonsA.AddRange(ribbonPanelB.AddStackedItems(B1, B2));
//--------------
//--------------
// Add the C ribbon panel
RibbonPanel ribbonPanelC = application.CreateRibbonPanel(tabName, "Sheet Tools");
// Create push button to trigger a command
PushButtonData C1 = new PushButtonData("Sheets From Views", "Sheets From Views", oaToolsAssembly, "OATools.Sheet_Tools.cmdSheetsFromViews");
C1.ToolTip = "Load the table family and " + "place table instances";
C1.Image = NewBitmapImage(exe, "icon-text.ico");
// Create push button to trigger a command
PushButtonData C2 = new PushButtonData("SelectedElement", "SelectedElement", oaToolsAssembly, "OATools.Sheet_Tools.cmdCreateSheetsFromViews");
C2.ToolTip = "Load the table family and " + "place table instances";
C2.Image = NewBitmapImage(exe, "icon-grid.ico");
//// Create push button to trigger a command
//PushButtonData B3 = new PushButtonData("none3", "none3", viewFiltersAssembly, "OATools.ViewFilters.Command3");
//B3.ToolTip = "Load the table family and " + "place table instances";
//B3.Image = NewBitmapImage(exe, "icon-grid.ico");
// Add the buttons to the panel
List <RibbonItem> projectButtonsC = new List <RibbonItem>();
projectButtonsC.AddRange(ribbonPanelC.AddStackedItems(C1, C2));
//--------------
// Add the D ribbon panel
RibbonPanel ribbonPanelD = application.CreateRibbonPanel(tabName, "DNotes");
// Create push button to trigger a command
PushButtonData D1 = new PushButtonData("cmdDNoteLoadPlace", "Create DNote", oaToolsAssembly, "OATools.DNotes.cmdDNoteLoadPlace");
D1.ToolTip = "Load the DNote family and " + "place DNote instances";
D1.Image = NewBitmapImage(exe, "dnote_icon.ico");
//Add the button to ribbon
//PushButton pushButtonD1 = ribbonPanelD.AddItem(D1) as PushButton;
// Create push button to trigger a command
PushButtonData D2 = new PushButtonData("CmdCreateDNoteLegend", "DNote Legend", oaToolsAssembly, "OATools.DNotes.CmdCreateDNoteLegend");
D2.ToolTip = "Load the DNote family and " + "place DNote instances";
D2.Image = NewBitmapImage(exe, "dnote_icon.ico");
//Add the button to ribbon
//PushButton pushButtonD2 = ribbonPanelD.AddItem(D2) as PushButton;
// Add the buttons to the panel
List <RibbonItem> projectButtonsD = new List <RibbonItem>();
projectButtonsD.AddRange(ribbonPanelD.AddStackedItems(D1, D2));
//--------------
//// Add the E ribbon panel
//RibbonPanel ribbonPanelE = application.CreateRibbonPanel(tabName, "Sheet Tools");
//// Create push button to trigger a command
//PushButtonData E1 = new PushButtonData("cmdChangeSheet", "Change Sheet", oaToolsAssembly, "OATools.Sheet_Tools.cmdChangeSheet");
//E1.ToolTip = "Load the DNote family and " + "place DNote instances";
//E1.LargeImage = NewBitmapImage(exe, "icon-grid.ico");
////Add the button to ribbon
////PushButton pushButtonE1 = ribbonPanelE.AddItem(E1) as PushButton;
//// Create push button to trigger a command
//PushButtonData E2 = new PushButtonData("cmdChangeTB", "Change TitleBlocks", oaToolsAssembly, "OATools.Sheet_Tools.cmdChangeTB");
//E2.ToolTip = "Load the DNote family and " + "place DNote instances";
//E2.LargeImage = NewBitmapImage(exe, "icon-grid.ico");
////Add the button to ribbon
////PushButton pushButtonE2 = ribbonPanelE.AddItem(E2) as PushButton;
//// Add the buttons to the panel
//List<RibbonItem> projectButtonsE = new List<RibbonItem>();
//projectButtonsE.AddRange(ribbonPanelE.AddStackedItems(E1, E2));
//--------------
//// Add the F ribbon panel
//RibbonPanel ribbonPanelF = application.CreateRibbonPanel(tabName, "Electrical Tools");
//// Create push button to trigger a command
//PushButtonData F1 = new PushButtonData("Emergency Circut", "Emergency Circut", oaToolsAssembly, "OATools.Electrical.cmdEmergencyCircut");
//F1.ToolTip = "Load the DNote family and " + "place DNote instances";
//F1.Image = NewBitmapImage(exe, "drafting_icon.ico");
//// Create push button to trigger a command
//PushButtonData F2 = new PushButtonData("Unswitched Circut", "Unswitched Circut", oaToolsAssembly, "OATools.Commands.cmdElementOveride");
//F2.ToolTip = "Load the DNote family and " + "place DNote instances";
//F2.Image = NewBitmapImage(exe, "drafting_icon.ico");
//// Add the buttons to the panel
//List<RibbonItem> projectButtonsF = new List<RibbonItem>();
//projectButtonsF.AddRange(ribbonPanelF.AddStackedItems(F1, F2));
//-------------------
// Add the G ribbon panel
RibbonPanel ribbonPanelG = application.CreateRibbonPanel(tabName, "Revitize");
// Create push button to trigger a command
PushButtonData G1 = new PushButtonData("DWG to Drafting View", "DWG to Drafting View", oaToolsAssembly, "OATools.Revitize.cmdDWG2DrafingView");
G1.ToolTip = "Load the DNote family and " + "place DNote instances";
G1.Image = NewBitmapImage(exe, "drafting_icon.ico");
// Create push button to trigger a command
PushButtonData G2 = new PushButtonData("Import Details", "Import", oaToolsAssembly, "OATools.Revitize.CmdViewImport");
G2.ToolTip = "Load the DNote family and " + "place DNote instances";
G2.Image = NewBitmapImage(exe, "drafting_icon.ico");
// Add the buttons to the panel
List <RibbonItem> projectButtonsG = new List <RibbonItem>();
projectButtonsG.AddRange(ribbonPanelG.AddStackedItems(G1, G2));
//------------------
// Add the 5th ribbon panel
RibbonPanel ribbonPanel4 = application.CreateRibbonPanel(tabName, "Settings");
// Create push button to trigger a command
PushButtonData d1 = new PushButtonData("Initilize", "Initilize", oaToolsAssembly, "OATools.Utilities.Initilize");
d1.ToolTip = "Initialize O/A Tools";
d1.LargeImage = NewBitmapImage(exe, "icon-initialize.ico");
//Add the button to ribbon
PushButton pushButtond1 = ribbonPanel4.AddItem(d1) as PushButton;
// Create push button to trigger a command
PushButtonData d2 = new PushButtonData("Check For Updates", "Check for Updates", oaToolsAssembly, "OATools.Settings.cmdCheckForUpdates");
d2.ToolTip = "Update O/A Tools";
d2.LargeImage = NewBitmapImage(exe, "icon-initialize.ico");
//Add the button to ribbon
PushButton pushButtond2 = ribbonPanel4.AddItem(d2) as PushButton;
}
catch
{
//show errer if anything fails
TaskDialog.Show("Error", "Error Building the O/A Tools ribbon or accessing resources123!");
}
}
private void CreateONBOXRibbon(UIControlledApplication application)
{
string dll = System.Reflection.Assembly.GetExecutingAssembly().Location;
string ribbonONBOX = "Onbox App";
application.CreateRibbonTab(ribbonONBOX);
IList <RibbonPanel> allProjectPanels = new List <RibbonPanel>();
IList <RibbonPanel> allFreePanels = new List <RibbonPanel>();
RibbonPanel panelRenumber = application.CreateRibbonPanel(ribbonONBOX, Properties.RibbonLanguage.RenumberElements_Title);
RibbonPanel panelStructuralMembers = application.CreateRibbonPanel(ribbonONBOX, Properties.RibbonLanguage.StructuralElements_Title);
RibbonPanel panelModifyElem = application.CreateRibbonPanel(ribbonONBOX, Properties.RibbonLanguage.ModifyElements_Title);
RibbonPanel panelTopo = application.CreateRibbonPanel(ribbonONBOX, Properties.RibbonLanguage.Topography_Title);
RibbonPanel panelManage = application.CreateRibbonPanel(ribbonONBOX, Properties.RibbonLanguage.Manage_Title);
RibbonPanel panelAbout = application.CreateRibbonPanel(ribbonONBOX, Properties.RibbonLanguage.MoreInfo_Title);
RibbonPanel panelNotifications = null;
allProjectPanels.Add(panelRenumber);
allProjectPanels.Add(panelStructuralMembers);
allProjectPanels.Add(panelModifyElem);
allProjectPanels.Add(panelTopo);
allProjectPanels.Add(panelManage);
allFreePanels.Add(panelAbout);
allFreePanels.Add(panelNotifications);
PushButton btnRenumberGrids = panelRenumber.AddItem(new PushButtonData(Properties.RibbonLanguage.RenumberElements_Grids, Properties.RibbonLanguage.RenumberElements_Grids.Replace("\\n", "\n"), dll, "ONBOXAppl.RenumberGridsAdvanced")) as PushButton;
btnRenumberGrids.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnRenumberGrids));
SplitButton sptRenumberParking = panelRenumber.AddItem(new SplitButtonData(Properties.RibbonLanguage.RenumberElements_RenumberParkingSpaces, Properties.RibbonLanguage.RenumberElements_RenumberParkingSpaces)) as SplitButton;
sptRenumberParking.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.sptRenumberParking));
PushButton btnRenumberBeams = panelRenumber.AddItem(new PushButtonData(Properties.RibbonLanguage.RenumberElements_RenumberBeams, Properties.RibbonLanguage.RenumberElements_RenumberBeams.Replace("\\n", "\n"), dll, "ONBOXAppl.RenumberBeams")) as PushButton;
btnRenumberBeams.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnRenumberBeams));
SplitButton sptRenumberColumns = panelRenumber.AddItem(new SplitButtonData(Properties.RibbonLanguage.RenumberElements_RenumberColumns, Properties.RibbonLanguage.RenumberElements_RenumberColumns)) as SplitButton;
sptRenumberColumns.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.sptRenumberColumns));
SplitButton sptJoinElements = panelModifyElem.AddItem(new SplitButtonData(Properties.RibbonLanguage.ModifyElements_JoinMultipleElements, Properties.RibbonLanguage.ModifyElements_JoinMultipleElements)) as SplitButton;
sptJoinElements.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.sptJoinElements));
PushButton btnCreateBeamsFromBuilding = panelStructuralMembers.AddItem(new PushButtonData(Properties.RibbonLanguage.StructuralElements_BeamsForBuilding, Properties.RibbonLanguage.StructuralElements_BeamsForBuilding.Replace("\\n", "\n"), dll, "ONBOXAppl.BeamsFromEntireBuilding")) as PushButton;
btnCreateBeamsFromBuilding.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnCreateBeamsFromBuilding));
PushButton btnCreateBeam = panelStructuralMembers.AddItem(new PushButtonData(Properties.RibbonLanguage.StructuralElements_BeamsFromWalls, Properties.RibbonLanguage.StructuralElements_BeamsFromWalls.Replace("\\n", "\n"), dll, "ONBOXAppl.BeamsFromWalls")) as PushButton;
btnCreateBeam.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnCreateBeam));
PushButton btnCreateBeamsFromColumns = panelStructuralMembers.AddItem(new PushButtonData(Properties.RibbonLanguage.StructuralElements_BeamsFromColumns, Properties.RibbonLanguage.StructuralElements_BeamsFromColumns.Replace("\\n", "\n"), dll, "ONBOXAppl.BeamsFromColumns")) as PushButton;
btnCreateBeamsFromColumns.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnCreateBeamsFromColumns));
PushButton btnCreateColumnsFromDwg = panelStructuralMembers.AddItem(new PushButtonData(Properties.RibbonLanguage.StructuralElements_ColumnsFromCAD, Properties.RibbonLanguage.StructuralElements_ColumnsFromCAD.Replace("\\n", "\n"), dll, "ONBOXAppl.ColumnsFromDwg")) as PushButton;
btnCreateColumnsFromDwg.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnCreateColumnsFromDwg));
//PushButton btnCreateBeamsUpdate = panelModifyElem.AddItem(new PushButtonData(" Atualizar \n vigas ", " Atualizar \n vigas ", dll, "ONBOXAppl.BeamUpdate")) as PushButton;
PushButton btnElementsCopyLevel = panelModifyElem.AddItem(new PushButtonData(Properties.RibbonLanguage.ModifyElements_CopyBeamsToLevels, Properties.RibbonLanguage.ModifyElements_CopyBeamsToLevels.Replace("\\n", "\n"), dll, "ONBOXAppl.ElementsCopyToLevels")) as PushButton;
btnElementsCopyLevel.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnElementsCopyLevel));
PushButton btnElmentsJoin = sptJoinElements.AddPushButton(new PushButtonData(Properties.RibbonLanguage.ModifyElements_JoinElements, Properties.RibbonLanguage.ModifyElements_JoinElements.Replace("\\n", "\n"), dll, "ONBOXAppl.ElementsJoinAdvanced")) as PushButton;
btnElmentsJoin.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnElmentsJoin));
PushButton btnElmentsSelectJoin = sptJoinElements.AddPushButton(new PushButtonData(Properties.RibbonLanguage.ModifyElements_SelectElementsToJoin, Properties.RibbonLanguage.ModifyElements_SelectElementsToJoin.Replace("\\n", "\n"), dll, "ONBOXAppl.ElementJoinSelect")) as PushButton;
btnElmentsSelectJoin.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnElmentsSelectJoin));
PushButton btnCreateTopoFromPointCloud = panelTopo.AddItem(new PushButtonData(Properties.RibbonLanguage.Topography_SurfaceByPointCloud, Properties.RibbonLanguage.Topography_SurfaceByPointCloud.Replace("\\n", "\n"), dll, "ONBOXAppl.TopoFromPointCloudAdvanced")) as PushButton;
btnCreateTopoFromPointCloud.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnCreateTopoFromPointCloud));
//PushButton btnCreateTopoFromDwgMarks = panelTopo.AddItem(new PushButtonData(" Topografia por CAD planimétrico ", " Topografia por \n planimetria ", dll, "ONBOXAppl.TopoFromDwgMarks")) as PushButton;
PushButton btnTopoSlope = panelTopo.AddItem(new PushButtonData(Properties.RibbonLanguage.Topography_SlopeByPads, Properties.RibbonLanguage.Topography_SlopeByPads.Replace("\\n", "\n"), dll, "ONBOXAppl.TopoSlopes")) as PushButton;
btnTopoSlope.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnTopoSlope));
PushButton btnRevitZip = panelManage.AddItem(new PushButtonData(Properties.RibbonLanguage.Manage_PackageProject, Properties.RibbonLanguage.Manage_PackageProject.Replace("\\n", "\n"), dll, "ONBOXAppl.RevitZip")) as PushButton;
btnRevitZip.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnRevitZip));
PushButton btnONBOXSite = panelAbout.AddItem(new PushButtonData(" Onbox ", " Onbox ", dll, "ONBOXAppl.SiteONBOX")) as PushButton;
//PushButton btnProjectExamplesFolder = panelAbout.AddItem(new PushButtonData(Properties.RibbonLanguage.About_SampleProjects, Properties.RibbonLanguage.About_SampleProjects.Replace("\\n", "\n"), dll, "ONBOXAppl.ProjectFolder")) as PushButton;
PushButton btnInfo = panelAbout.AddItem(new PushButtonData(Properties.RibbonLanguage.About_Title, Properties.RibbonLanguage.About_Title, dll, "ONBOXAppl.AboutONBOXApp")) as PushButton;
//SplitButtons for Parking
PushButton btnRenumberParking = sptRenumberParking.AddPushButton(new PushButtonData(Properties.RibbonLanguage.RenumberElements_ParkingSpaces, Properties.RibbonLanguage.RenumberElements_ParkingSpaces.Replace("\\n", "\n"), dll, "ONBOXAppl.RenumberParking")) as PushButton;
btnRenumberParking.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnRenumberParking));
PushButton btnRenumberBlockParking = sptRenumberParking.AddPushButton(new PushButtonData(Properties.RibbonLanguage.RenumberElements_NearestSpaces, Properties.RibbonLanguage.RenumberElements_NearestSpaces.Replace("\\n", "\n"), dll, "ONBOXAppl.RenumberBlockParking")) as PushButton;
btnRenumberBlockParking.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnRenumberBlockParking));
PushButton btnRenumberClearParking = sptRenumberParking.AddPushButton(new PushButtonData(Properties.RibbonLanguage.RenumberElements_ClearParkingNumbering, Properties.RibbonLanguage.RenumberElements_ClearParkingNumbering.Replace("\\n", "\n"), dll, "ONBOXAppl.RenumberCleaner")) as PushButton;
btnRenumberClearParking.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnRenumberClearParking));
//SplitButtons for Columns
PushButton btnRenumberColumns = sptRenumberColumns.AddPushButton(new PushButtonData(Properties.RibbonLanguage.RenumberElements_Columns, Properties.RibbonLanguage.RenumberElements_Columns.Replace("\\n", "\n"), dll, "ONBOXAppl.RenumberColumns")) as PushButton;
btnRenumberColumns.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnRenumberColumns));
PushButton btnRenumberColumnsSelect = sptRenumberColumns.AddPushButton(new PushButtonData(Properties.RibbonLanguage.RenumberElements_SelectColumns, Properties.RibbonLanguage.RenumberElements_SelectColumns.Replace("\\n", "\n"), dll, "ONBOXAppl.RenumberColumnsSelection")) as PushButton;
btnRenumberColumnsSelect.SetContextualHelp(new ContextualHelp(ContextualHelpType.Url, Properties.HelpLinks.btnRenumberColumnsSelect));
BitmapImage grid32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnRenumberGrid32.png", UriKind.Absolute));
BitmapImage grid16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnRenumberGrid16.png", UriKind.Absolute));
BitmapImage parking32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnRenumberParking32.png", UriKind.Absolute));
BitmapImage parking16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnRenumberParking16.png", UriKind.Absolute));
BitmapImage parkingDelete16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnRenumberDeleteParking16.png", UriKind.Absolute));
BitmapImage parkingDelete32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnRenumberDeleteParking32.png", UriKind.Absolute));
BitmapImage parkingBlock16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnRenumberBlockParking16.png", UriKind.Absolute));
BitmapImage parkingBlock32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnRenumberBlockParking32.png", UriKind.Absolute));
BitmapImage beams32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnRenumberBeams32.png", UriKind.Absolute));
BitmapImage beams16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnRenumberBeams16.png", UriKind.Absolute));
BitmapImage Column16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnRenumberColumns16.png", UriKind.Absolute));
BitmapImage Column32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnRenameColumns32.png", UriKind.Absolute));
BitmapImage Column16Select = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnRenameColumns16.png", UriKind.Absolute));
BitmapImage Column32Select = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnRenameColumns32Select.png", UriKind.Absolute));
BitmapImage BeamsFromBuilding16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnBeamsFromBuilding16.png", UriKind.Absolute));
BitmapImage BeamsFromBuilding32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnBeamsFromBuilding32.png", UriKind.Absolute));
BitmapImage createBeam16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnWallsToBeams16.png", UriKind.Absolute));
BitmapImage createBeam32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnWallsToBeamsCreate32.png", UriKind.Absolute));
BitmapImage createUpdate32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnWallsToBeamsUpdate32.png", UriKind.Absolute));
BitmapImage createBeamsFromColumns16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnColumnsToBeams16.png", UriKind.Absolute));
BitmapImage createBeamsFromColumns32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnColumnsToBeams32.png", UriKind.Absolute));
BitmapImage ColumnsFromDwg16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnColumnsFromDWG16.png", UriKind.Absolute));
BitmapImage ColumnsFromDwg32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnColumnsFromDWG32.png", UriKind.Absolute));
BitmapImage ElementsCopy16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnBeamsCopyLevels16.png", UriKind.Absolute));
BitmapImage ElementsCopy32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnBeamsCopyLevels.png", UriKind.Absolute));
BitmapImage ElementsJoin16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnJoinMultiple16.png", UriKind.Absolute));
BitmapImage ElementsJoin32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnJoinMultiple.png", UriKind.Absolute));
BitmapImage ElementsSelectJoin16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnJoinSelectMultiple16.png", UriKind.Absolute));
BitmapImage ElementsSelectJoin32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnJoinSelectMultiple.png", UriKind.Absolute));
BitmapImage TopoFromPointCloud16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnTopoFromPointCloud16.png", UriKind.Absolute));
BitmapImage TopoFromPointCloud32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnTopoFromPointCloud32.png", UriKind.Absolute));
BitmapImage TopoFromDWG16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnTopoFromDWG16.png", UriKind.Absolute));
BitmapImage TopoFromDWG32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnTopoFromDWG.png", UriKind.Absolute));
BitmapImage TopoSlope16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnTopoSlope16.png", UriKind.Absolute));
BitmapImage TopoSlope32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnTopoSlope.png", UriKind.Absolute));
BitmapImage ONBOX32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/onBox32.png", UriKind.Absolute));
BitmapImage ONBOX16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/onBox16.png", UriKind.Absolute));
BitmapImage INFO32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnInfo32.png", UriKind.Absolute));
BitmapImage INFO16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnInfo16.png", UriKind.Absolute));
//BitmapImage ProjectExamples16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnProjectExamplesFolder16.png", UriKind.Absolute));
//BitmapImage ProjectExamples32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnProjectExamplesFolder.png", UriKind.Absolute));
BitmapImage Package16 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnPackage16.png", UriKind.Absolute));
BitmapImage Package32 = new BitmapImage(new Uri("pack://application:,,,/ONBOXAppl;component/Resources/btnPackage32.png", UriKind.Absolute));
btnRenumberGrids.LargeImage = grid32;
btnRenumberGrids.Image = grid16;
btnRenumberGrids.ToolTip = Properties.RibbonLanguage.RenumberElements_Grids_ToolTip;
btnRenumberGrids.LongDescription = Properties.RibbonLanguage.RenumberElements_Grids_Descrip;
//sptRenumberParking.LongDescription = "Comando para renumerar vagas de estacionamento automaticamente.";
btnRenumberBeams.LargeImage = beams32;
btnRenumberBeams.Image = beams16;
btnRenumberBeams.ToolTip = Properties.RibbonLanguage.RenumberElements_RenumberBeams_ToolTip;
btnRenumberBeams.LongDescription = Properties.RibbonLanguage.RenumberElements_RenumberBeams_Descrip;
btnRenumberColumns.LargeImage = Column32;
btnRenumberColumns.Image = Column16;
btnRenumberColumns.ToolTip = Properties.RibbonLanguage.RenumberElements_Columns_ToolTip;
btnRenumberColumns.LongDescription = Properties.RibbonLanguage.RenumberElements_Columns_Descrip;
btnRenumberColumnsSelect.LargeImage = Column32Select;
btnRenumberColumnsSelect.Image = Column16Select;
btnRenumberColumnsSelect.ToolTip = Properties.RibbonLanguage.RenumberElements_SelectColumns_ToolTip;
btnRenumberColumnsSelect.LongDescription = Properties.RibbonLanguage.RenumberElements_SelectColumns_Descrip;
btnCreateBeamsFromBuilding.Image = BeamsFromBuilding16;
btnCreateBeamsFromBuilding.LargeImage = BeamsFromBuilding32;
btnCreateBeamsFromBuilding.ToolTip = Properties.RibbonLanguage.StructuralElements_BeamsForBuilding_ToolTip;
btnCreateBeamsFromBuilding.LongDescription = Properties.RibbonLanguage.StructuralElements_BeamsForBuilding_Descrip;
btnCreateBeam.Image = createBeam16;
btnCreateBeam.LargeImage = createBeam32;
btnCreateBeam.ToolTip = Properties.RibbonLanguage.StructuralElements_BeamsFromWalls_ToolTip;
btnCreateBeam.LongDescription = Properties.RibbonLanguage.StructuralElements_BeamsFromWalls_Descrip;
//btnCreateBeamsUpdate.LargeImage = createUpdate32;
//btnCreateBeamsUpdate.ToolTip = "Atualizar vigas estruturais";
//btnCreateBeamsUpdate.LongDescription = "Comando para atualizar vigas estruturais, o comando cria tipos automaticamente, é possivel também pré-dimensionar a altura da viga dentre outras opções.";
btnCreateColumnsFromDwg.Image = ColumnsFromDwg16;
btnCreateColumnsFromDwg.LargeImage = ColumnsFromDwg32;
btnCreateColumnsFromDwg.ToolTip = Properties.RibbonLanguage.StructuralElements_ColumnsFromCAD_ToolTip;
btnCreateColumnsFromDwg.LongDescription = Properties.RibbonLanguage.StructuralElements_ColumnsFromCAD_Descrip;
btnElementsCopyLevel.Image = ElementsCopy16;
btnElementsCopyLevel.LargeImage = ElementsCopy32;
btnElementsCopyLevel.ToolTip = Properties.RibbonLanguage.ModifyElements_CopyBeamsToLevels_ToolTip;
btnElementsCopyLevel.LongDescription = Properties.RibbonLanguage.ModifyElements_CopyBeamsToLevels_Descrip;
btnElmentsJoin.Image = ElementsJoin16;
btnElmentsJoin.LargeImage = ElementsJoin32;
btnElmentsJoin.ToolTip = Properties.RibbonLanguage.ModifyElements_JoinElements_ToolTip;
btnElmentsJoin.LongDescription = Properties.RibbonLanguage.ModifyElements_JoinElements_Descrip;
btnElmentsSelectJoin.Image = ElementsSelectJoin16;
btnElmentsSelectJoin.LargeImage = ElementsSelectJoin32;
btnElmentsSelectJoin.ToolTip = Properties.RibbonLanguage.ModifyElements_SelectElementsToJoin_ToolTip;
btnElmentsSelectJoin.LongDescription = Properties.RibbonLanguage.ModifyElements_SelectElementsToJoin_Descrip;
btnCreateTopoFromPointCloud.Image = TopoFromPointCloud16;
btnCreateTopoFromPointCloud.LargeImage = TopoFromPointCloud32;
btnCreateTopoFromPointCloud.ToolTip = Properties.RibbonLanguage.Topography_SurfaceByPointCloud_ToolTip;
btnCreateTopoFromPointCloud.LongDescription = Properties.RibbonLanguage.Topography_SurfaceByPointCloud_Descrip;
btnCreateBeamsFromColumns.ToolTip = Properties.RibbonLanguage.StructuralElements_BeamsFromColumns_ToolTip;
btnCreateBeamsFromColumns.LongDescription = Properties.RibbonLanguage.StructuralElements_BeamsFromColumns_Descrip;
btnCreateBeamsFromColumns.Image = createBeamsFromColumns16;
btnCreateBeamsFromColumns.LargeImage = createBeamsFromColumns32;
//btnCreateTopoFromDwgMarks.ToolTip = "Criar topografia a partir de arquivos de CAD planimétricos";
//btnCreateTopoFromDwgMarks.LongDescription = "Comando para criar topografia a partir de arquivos CAD não altimétricos, ou seja, o arquivo de não contém cota Z, o comando lê o arquivo de texto mais próximo que contém informação de altura do ponto.";
//btnCreateTopoFromDwgMarks.Image = TopoFromDWG16;
//btnCreateTopoFromDwgMarks.LargeImage = TopoFromDWG32;
btnTopoSlope.ToolTip = Properties.RibbonLanguage.Topography_SlopeByPads_ToolTip;
btnTopoSlope.LongDescription = Properties.RibbonLanguage.Topography_SlopeByPads_Descrip;
btnTopoSlope.Image = TopoSlope16;
btnTopoSlope.LargeImage = TopoSlope32;
btnONBOXSite.LargeImage = ONBOX32;
btnONBOXSite.Image = ONBOX16;
btnONBOXSite.ToolTip = Properties.RibbonLanguage.About_Site_ToolTip;
btnONBOXSite.LongDescription = Properties.RibbonLanguage.About_Site_Descrip;
btnInfo.LargeImage = INFO32;
btnInfo.Image = INFO16;
btnInfo.ToolTip = Properties.RibbonLanguage.About_Onbox_ToolTip;
btnInfo.ToolTip = Properties.RibbonLanguage.About_Onbox_Descrip;
//btnProjectExamplesFolder.Image = ProjectExamples16;
//btnProjectExamplesFolder.LargeImage = ProjectExamples32;
//btnProjectExamplesFolder.ToolTip = Properties.RibbonLanguage.About_SampleProjects_ToolTip;
//btnProjectExamplesFolder.LongDescription = Properties.RibbonLanguage.About_SampleProjects_Descrip;
btnRevitZip.Image = Package16;
btnRevitZip.LargeImage = Package32;
btnRevitZip.ToolTip = Properties.RibbonLanguage.Manage_PackageProject_ToolTip;
btnRevitZip.LongDescription = Properties.RibbonLanguage.Manage_PackageProject_Descrip;
//SplitButtons
btnRenumberParking.LargeImage = parking32;
btnRenumberParking.Image = parking16;
btnRenumberParking.ToolTip = Properties.RibbonLanguage.RenumberElements_RenumberParkingSpaces_ToolTip;
btnRenumberParking.LongDescription = Properties.RibbonLanguage.RenumberElements_RenumberParkingSpaces_Descrip;
btnRenumberBlockParking.LargeImage = parkingBlock32;
btnRenumberBlockParking.Image = parkingBlock16;
btnRenumberBlockParking.ToolTip = Properties.RibbonLanguage.RenumberElements_NearestSpaces_ToolTip;
btnRenumberBlockParking.LongDescription = Properties.RibbonLanguage.RenumberElements_NearestSpaces_Descrip;
btnRenumberClearParking.LargeImage = parkingDelete32;
btnRenumberClearParking.Image = parkingDelete16;
btnRenumberClearParking.ToolTip = Properties.RibbonLanguage.RenumberElements_ClearParkingNumbering_ToolTip;
btnRenumberClearParking.LongDescription = Properties.RibbonLanguage.RenumberElements_ClearParkingNumbering_Descrip;
foreach (RibbonPanel currentRibbonPanel in allProjectPanels)
{
if (currentRibbonPanel != null)
{
foreach (RibbonItem currentItem in currentRibbonPanel.GetItems())
{
if (currentItem is PushButton)
{
PushButton currentPushButton = currentItem as PushButton;
currentPushButton.AvailabilityClassName = "ONBOXAppl.ButtonAvailableOnProjectEnv";
}
if (currentItem is SplitButton)
{
SplitButton currentSplitButton = currentItem as SplitButton;
foreach (PushButton currentPushButton in currentSplitButton.GetItems())
{
currentPushButton.AvailabilityClassName = "ONBOXAppl.ButtonAvailableOnProjectEnv";
}
}
}
}
}
foreach (RibbonPanel currentRibbonPanel in allFreePanels)
{
if (currentRibbonPanel != null)
{
foreach (RibbonItem currentItem in currentRibbonPanel.GetItems())
{
if (currentItem is PushButton)
{
PushButton currentPushButton = currentItem as PushButton;
currentPushButton.AvailabilityClassName = "ONBOXAppl.ButtonAvailableAlways";
}
if (currentItem is SplitButton)
{
SplitButton currentSplitButton = currentItem as SplitButton;
foreach (PushButton currentPushButton in currentSplitButton.GetItems())
{
currentPushButton.AvailabilityClassName = "ONBOXAppl.ButtonAvailableAlways";
}
}
}
}
}
}
/// <summary>
/// Startup
/// </summary>
/// <param name="application"></param>
/// <returns></returns>
public Result OnStartup(UIControlledApplication application)
{
try
{
// Version
if (!application.ControlledApplication.VersionName.Contains("2014") && !application.ControlledApplication.VersionName.Contains("2015") && !application.ControlledApplication.VersionName.Contains("2016"))
{
using (TaskDialog td = new TaskDialog("Cannot Continue"))
{
td.TitleAutoPrefix = false;
td.MainInstruction = "Incompatible Revit Version";
td.MainContent = "This Add-In was built for Revit 2014, 2015 and 2016, please contact CASE for assistance.";
td.Show();
}
return(Result.Cancelled);
}
// Master Tab
const string c_tabName = "CASE";
try
{
// Create the Tab
application.CreateRibbonTab(c_tabName);
}
catch { }
/*
* // Assembly Paths
* string m_issuetracker = Path.Combine(ProgramFilesx86(), "CASE", "ARUP Issue Tracker", "ARUP.IssueTracker.dll");
*
* // Check that File Exists
* if (!File.Exists(m_issuetracker))
* {
* using (TaskDialog td = new TaskDialog("Cannot Continue"))
* {
* td.TitleAutoPrefix = false;
* td.MainInstruction = "Required Issue Tracker Library Not Found";
* td.MainContent = m_issuetracker;
* td.Show();
* }
* return Result.Cancelled;
* }
*
* // Load Assemblies
* Assembly.LoadFrom(m_issuetracker);
*/
string m_issuetracker = "ARUP.IssueTracker.dll";
// Tab
RibbonPanel m_panel = application.CreateRibbonPanel(c_tabName, "Arup Issue Tracker");
// Button Data
PushButton m_pushButton = m_panel.AddItem(new PushButtonData("Issue Tracker",
"Issue Tracker",
Path.Combine(_path, "ARUP.IssueTracker.Revit.dll"),
"ARUP.IssueTracker.Revit.Entry.CmdMain")) as PushButton;
// Images and Tooltip
if (m_pushButton != null)
{
m_pushButton.Image = LoadPngImgSource("ARUP.IssueTracker.Assets.ARUPIssueTrackerIcon16x16.png", m_issuetracker);
m_pushButton.LargeImage = LoadPngImgSource("ARUP.IssueTracker.Assets.ARUPIssueTrackerIcon32x32.png", m_issuetracker);
m_pushButton.ToolTip = "Arup Issue Manager";
}
// Initiate RestSharp first to avoid the conflict with Dynamo
// string restSharpDllPath = Path.Combine(ProgramFilesx86(), "CASE", "ARUP Issue Tracker", "RestSharp.dll");
// Assembly.LoadFrom(restSharpDllPath);
}
catch (Exception ex1)
{
MessageBox.Show("exception: " + ex1);
return(Result.Failed);
}
return(Result.Succeeded);
}
public Result OnStartup(UIControlledApplication uiConApp)
{
// Method to add Tab and Panel
RibbonPanel structure_Panel = null;
RibbonPanel achitecture_Panel = null;
RibbonPanel other_Panel = null;
//Get all ribbonPanel in the tab
List <RibbonPanel> myAllRibPanel = getRibbonPanels(uiConApp);
foreach (RibbonPanel myRibPanel in myAllRibPanel)
{
if (myRibPanel.Name == "Achitecture")
{
achitecture_Panel = myRibPanel;
}
if (myRibPanel.Name == "Structure")
{
structure_Panel = myRibPanel;
}
if (myRibPanel.Name == "Other")
{
other_Panel = myRibPanel;
}
}
//Location
string thisAssemblyPath = Assembly.GetExecutingAssembly().Location;
//Add my Commands to Panel
//Other
//Command 1.1 (name: Increase Value Of parameter)
PushButtonData increaseParaForm_Button_Data_01 = new PushButtonData("increaseParaForm_Button_Data_01", "(-)Para(+)", thisAssemblyPath, "MyAppV1.IncreaseParameter");
increaseParaForm_Button_Data_01.ToolTip = "Tăng hoặc giảm dần giá trị parameter ...";
increaseParaForm_Button_Data_01.Image = PngImageSource("MyAppV1.Resources.Increase_Parameter.Size16.png");
increaseParaForm_Button_Data_01.LargeImage = PngImageSource("MyAppV1.Resources.Increase_Parameter.Size32.png");
//add
//other_Panel.AddItem(increaseParaForm_Button_Data_01);
//Command 1.2 (name: Show Element By Value Parameter)
PushButtonData showElementForm_Button_Data_01 = new PushButtonData("showElementForm_Button_Data_01", "Show by\n Parameter", thisAssemblyPath, "MyAppV1.ShowElementByValueParaAutoCom");
showElementForm_Button_Data_01.ToolTip = "Show element bằng giá trị parameter...";
showElementForm_Button_Data_01.Image = PngImageSource("MyAppV1.Resources.Show_Element.Show-Size-16.png");
showElementForm_Button_Data_01.LargeImage = PngImageSource("MyAppV1.Resources.Show_Element.Show-Size-32.png");
//add
//other_Panel.AddItem(showElementForm_Button_Data_01);
//Command 1.3 (name: Show Element By Value Parameter)
PushButtonData selectElementByParaValueForm_Button_Data_01 = new PushButtonData("selectElementByParaValueForm_Button_Data_01", "Select by\n Parameter", thisAssemblyPath, "MyAppV1.SelectByValueParameter");
selectElementByParaValueForm_Button_Data_01.ToolTip = "Select các element bằng giá trị parameter...";
selectElementByParaValueForm_Button_Data_01.Image = PngImageSource("MyAppV1.Resources.Select_Element.Select-Size-16.png");
selectElementByParaValueForm_Button_Data_01.LargeImage = PngImageSource("MyAppV1.Resources.Select_Element.Select-Size-32.png");
//add
//other_Panel.AddItem(selectElementByParaValueForm_Button_Data_01);
SplitButtonData sb1 = new SplitButtonData("Parameter Tool", "Para Tool");
SplitButton sb_1 = other_Panel.AddItem(sb1) as SplitButton;
sb_1.AddPushButton(increaseParaForm_Button_Data_01);
sb_1.AddPushButton(showElementForm_Button_Data_01);
sb_1.AddPushButton(selectElementByParaValueForm_Button_Data_01);
//Add separator
other_Panel.AddSeparator();
//Command 2.1 (name: Show Element By Value Parameter)
PushButtonData quickDimGridOrLevel_Button_Data_01 = new PushButtonData("quickDimGridOrLevel_Button_Data_01", "Quick Dim \n Grids/Level", thisAssemblyPath, "MyAppV1.QuickDimLevelOrGrid");
quickDimGridOrLevel_Button_Data_01.ToolTip = "Dim nhanh lưới mặt bằng và cao độ";
quickDimGridOrLevel_Button_Data_01.Image = PngImageSource("MyAppV1.Resources.Dimensions.QuickDimGrid-Size-32.png");
quickDimGridOrLevel_Button_Data_01.LargeImage = PngImageSource("MyAppV1.Resources.Dimensions.QuickDimGrid-Size-32.png");
//add
//other_Panel.AddItem(quickDimGridOrLevel_Button_Data_01);
//Command 2.1 (name: Show Element By Value Parameter)
PushButtonData quickDimGeneral_Button_Data_01 = new PushButtonData("quickDimGeneral_Button_Data_01", "Quick Dim\nby Catergory", thisAssemblyPath, "MyAppV1.QuickDimGeneral");
quickDimGeneral_Button_Data_01.ToolTip = "Dim nhanh bằng cách chọn các đường vuông góc với Views";
quickDimGeneral_Button_Data_01.Image = PngImageSource("MyAppV1.Resources.Dimensions.Quick-Dim-Size-16.png");
quickDimGeneral_Button_Data_01.LargeImage = PngImageSource("MyAppV1.Resources.Dimensions.Quick-Dim-Size-32.png");
//add
//other_Panel.AddItem(quickDimGeneral_Button_Data_01);
//Command 2.2 (name: LocateColumn)
PushButtonData quickLocateColumn_Button_Data_01 = new PushButtonData("quickLocateColumn_Button_Data_01", "Locate\nColumn", thisAssemblyPath, "MyAppV1.LocateColumnOnPlan");
quickLocateColumn_Button_Data_01.ToolTip = "Định vị cột X,Y trên mặt bằng (Dim theo phương X, Y và các lưới) ";
quickLocateColumn_Button_Data_01.Image = PngImageSource("MyAppV1.Resources.Dimensions.Dim-Columns-Size-32.png");
quickLocateColumn_Button_Data_01.LargeImage = PngImageSource("MyAppV1.Resources.Dimensions.Dim-Columns-Size-32.png");
//add
//other_Panel.AddItem(quickLocateColumn_Button_Data_01);
SplitButtonData sb2 = new SplitButtonData("splitButtonDim", "Quick Dim Tool");
SplitButton sb_2 = other_Panel.AddItem(sb2) as SplitButton;
sb_2.AddPushButton(quickDimGridOrLevel_Button_Data_01);
sb_2.AddPushButton(quickDimGeneral_Button_Data_01);
sb_2.AddPushButton(quickLocateColumn_Button_Data_01);
//Command 2.3 (name: Dim setting Form)
PushButtonData dimettingForm_Button_Data_01 = new PushButtonData("dimettingForm_Button_Data_01", "Dim setting", thisAssemblyPath, "MyAppV1.DimenisonGroupSettingForm");
dimettingForm_Button_Data_01.ToolTip = "Chỉnh sửa thông số của dimension tools ";
dimettingForm_Button_Data_01.Image = PngImageSource("MyAppV1.Resources.Dimensions.Dim-Setting-Form-32.png");
dimettingForm_Button_Data_01.LargeImage = PngImageSource("MyAppV1.Resources.Dimensions.Dim-Setting-Form-32.png");
//add
other_Panel.AddItem(dimettingForm_Button_Data_01);
//Command 2.4 (name: Edit dimension Value Form)
PushButtonData editDimValue_Button_Data_01 = new PushButtonData("editDimValue_Button_Data_01", "Edit/Reset \n Dimensions", thisAssemblyPath, "MyAppV1.EditDimensionValue");
editDimValue_Button_Data_01.ToolTip = "Chỉnh sửa giá trị hiển thị của Dimension, AngularDimension";
editDimValue_Button_Data_01.Image = PngImageSource("MyAppV1.Resources.Dimensions.Edit-Dim-Size-32.png");
editDimValue_Button_Data_01.LargeImage = PngImageSource("MyAppV1.Resources.Dimensions.Edit-Dim-Size-32.png");
//add
other_Panel.AddItem(editDimValue_Button_Data_01);
//Add separator
other_Panel.AddSeparator();
//Command 3.1 (name: Logo Link)
PushButtonData logoLink_Button_Data_01 = new PushButtonData("logoLink_Button_Data_01", @"INAECJSC", thisAssemblyPath, "MyAppV1.GotoWebSite");
logoLink_Button_Data_01.ToolTip = "Go to INAECJSC.VN";
logoLink_Button_Data_01.Image = PngImageSource("MyAppV1.Resources.Logo_INAEC.logo-Size-16.png");
logoLink_Button_Data_01.LargeImage = PngImageSource("MyAppV1.Resources.Logo_INAEC.logo-Size-32.png");
//add
other_Panel.AddItem(logoLink_Button_Data_01);
//App
uiConApp.ApplicationClosing += a_ApplicationClosing;
//Set Application to Idling
uiConApp.Idling += a_Idling;
return(Result.Succeeded);
}
/// <summary>
/// Implement this method to implement the external application which should be called when
/// Revit starts before a file or default template is actually loaded.
/// </summary>
/// <param name="application">An object that is passed to the external application
/// which contains the controlled application.</param>
/// <returns>Return the status of the external application.
/// A result of Succeeded means that the external application successfully started.
/// Cancelled can be used to signify that the user cancelled the external operation at
/// some point.
/// If false is returned then Revit should inform the user that the external application
/// failed to load and the release the internal reference.</returns>
public Autodesk.Revit.UI.Result OnStartup(UIControlledApplication application)
{
m_application = application;
Autodesk.Revit.UI.Result rc = Autodesk.Revit.UI.Result.Failed;
string[] lines = null;
int n = 0;
int k = 0;
try
{
// Check whether the file contains samples' list exists
// If not, return failure
string filename = m_fileNameStem;
if (!GetFilepath(ref filename))
{
ErrorMsg(m_fileNameStem + " not found.");
return(rc);
}
// Read all lines from the file
lines = ReadAllLinesWithInclude(filename);
// Remove comments
lines = RemoveComments(lines);
// Add default pulldown menus of samples to Revit
m_panelRvtSamples = application.CreateRibbonPanel("RvtSamples");
int i = 0;
List <PulldownButtonData> pdData = new List <PulldownButtonData>(3);
foreach (string category in Enum.GetNames(typeof(DefaultPulldownMenus)))
{
if ((i + 1) % 3 == 1)
{
pdData.Clear();
}
//
// Prepare PulldownButtonData for add stacked buttons operation
//
string displayName = GetDisplayNameByEnumName(category);
List <SampleItem> sampleItems = new List <SampleItem>();
m_defaultMenus.Add(category, sampleItems);
PulldownButtonData data = new PulldownButtonData(displayName, displayName);
pdData.Add(data);
//
// Add stacked buttons to RvtSamples panel and set their display names and images
//
if ((i + 1) % 3 == 0)
{
IList <RibbonItem> addedButtons = m_panelRvtSamples.AddStackedItems(pdData[0], pdData[1], pdData[2]);
foreach (RibbonItem item in addedButtons)
{
String name = item.ItemText;
string enumName = GetEnumNameByDisplayName(name);
PulldownButton button = item as PulldownButton;
button.Image = new BitmapImage(
new Uri(Path.Combine(s_assemblyDirectory, "Icons\\" + enumName + ".ico"), UriKind.Absolute));
button.ToolTip = Properties.Resource.ResourceManager.GetString(enumName);
m_pulldownButtons.Add(name, button);
}
}
i++;
}
//
// Add sample items to the pulldown buttons
//
n = lines.GetLength(0);
k = 0;
while (k < n)
{
AddSample(lines, n, ref k);
}
AddSamplesToDefaultPulldownMenus();
AddCustomizedPulldownMenus();
rc = Autodesk.Revit.UI.Result.Succeeded;
}
catch (Exception e)
{
string s = string.Format("{0}: n = {1}, k = {2}, lines[k] = {3}",
e.Message, n, k, (k < n ? lines[k] : "eof"));
ErrorMsg(s);
}
return(rc);
}
private void HitOn(int x, int y)
{
if (Ribbon.Tabs.Count == 0 || Ribbon.ActiveTab == null)
{
SelectRibbon();
return;
}
if (Ribbon != null)
{
if (Ribbon.TabHitTest(x, y))
{
SelectedElement = Ribbon.ActiveTab;
}
else
{
#region Tab ScrollTest
if (Ribbon.ActiveTab.TabContentBounds.Contains(x, y))
{
if (Ribbon.ActiveTab.ScrollLeftBounds.Contains(x, y) && Ribbon.ActiveTab.ScrollLeftVisible)
{
Ribbon.ActiveTab.ScrollLeft();
SelectedElement = Ribbon.ActiveTab;
return;
}
if (Ribbon.ActiveTab.ScrollRightBounds.Contains(x, y) && Ribbon.ActiveTab.ScrollRightVisible)
{
Ribbon.ActiveTab.ScrollRight();
SelectedElement = Ribbon.ActiveTab;
return;
}
}
#endregion
//Check Panel
if (Ribbon.ActiveTab.TabContentBounds.Contains(x, y))
{
RibbonPanel hittedPanel = null;
foreach (var panel in Ribbon.ActiveTab.Panels)
{
if (panel.Bounds.Contains(x, y))
{
hittedPanel = panel;
break;
}
}
if (hittedPanel != null)
{
//Check item
RibbonItem hittedItem = null;
foreach (var item in hittedPanel.Items)
{
if (item.Bounds.Contains(x, y))
{
hittedItem = item;
break;
}
}
if (hittedItem != null && hittedItem is IContainsSelectableRibbonItems)
{
//Check subitem
RibbonItem hittedSubItem = null;
foreach (var subItem in (hittedItem as IContainsSelectableRibbonItems).GetItems())
{
if (subItem.Bounds.Contains(x, y))
{
hittedSubItem = subItem;
break;
}
}
if (hittedSubItem != null)
{
SelectedElement = hittedSubItem;
}
else
{
SelectedElement = hittedItem;
}
}
else if (hittedItem != null)
{
SelectedElement = hittedItem;
}
else
{
SelectedElement = hittedPanel;
}
}
else
{
SelectedElement = Ribbon.ActiveTab;
}
}
else if (Ribbon.QuickAcessToolbar.SuperBounds.Contains(x, y))
{
var itemHitted = false;
foreach (var item in Ribbon.QuickAcessToolbar.Items)
{
if (item.Bounds.Contains(x, y))
{
itemHitted = true;
SelectedElement = item;
break;
}
}
if (!itemHitted)
{
SelectedElement = Ribbon.QuickAcessToolbar;
}
}
else if (Ribbon.OrbBounds.Contains(x, y))
{
Ribbon.OrbMouseDown();
}
else
{
SelectRibbon();
Ribbon.ForceOrbMenu = false;
if (Ribbon.OrbDropDown.Visible)
{
Ribbon.OrbDropDown.Close();
}
}
}
}
}
public Result OnStartup(UIControlledApplication application)
{
// Create a custom ribbon tab
string tabName = "CRM Tools";
application.CreateRibbonTab(tabName);
string REVIT_VERSION = "v2018";
string commandsPath = "";
commandsPath = @"C:\Users\" + Environment.UserName + @"\Documents\CRMRevitTools\" + REVIT_VERSION + @"\Commands\";
string iconsPath = "";
iconsPath = @"C:\Users\" + Environment.UserName + @"\Documents\CRMRevitTools\" + REVIT_VERSION + @"\RevitIcons\";
#region CreateRevitSheets
// Create a push button
PushButtonData btnCreateRevitSheets = new PushButtonData("cmdCreateRevitSheets", " Create \nSheets", commandsPath + "CreateRevitSheets.dll", "CreateRevitSheets.Class1");
btnCreateRevitSheets.ToolTip = "Create multiple Sheets at once. Assign Views to Sheets.";
btnCreateRevitSheets.LongDescription = "Manually create Sheets or load them from a (.csv) file. " +
"CSV files can be created with Microsoft Excel. The Sheet Number must be in Column A and the Sheet Name must be in Column B. Each Sheet should have its own Row. " +
"Sheet 1 in Row 1, Sheet 2 in Row 2, etc.";
// create bitmap image for button
Uri uriLargeImage_CreateRevitSheets = new Uri(iconsPath + @"32x32\cmdRevitSheetsImage_32x32.bmp");
BitmapImage largeImage_CreateRevitSheets = new BitmapImage(uriLargeImage_CreateRevitSheets);
// create bitmap image for button
Uri uriSmallImage_CreateRevitSheets = new Uri(iconsPath + @"16x16\cmdRevitSheetsImage_16x16.bmp");
BitmapImage smallImage_CreateRevitSheets = new BitmapImage(uriSmallImage_CreateRevitSheets);
btnCreateRevitSheets.LargeImage = largeImage_CreateRevitSheets;
btnCreateRevitSheets.Image = smallImage_CreateRevitSheets;
#endregion
#region SharedParameterCreator
// Create a push button
PushButtonData btnSharedParameterCreator = new PushButtonData("cmdSharedParameterCreator", "Shared \nParameter Creator", commandsPath + "SharedParameterCreator.dll", "SharedParameterCreator.Class1");
btnSharedParameterCreator.ToolTip = "Create a Shared Parameter file from a CSV (Comma delimited) (.csv) file list";
btnSharedParameterCreator.LongDescription = "Create large numbers of Shared Parameters. To use this program, first a file with the .csv extension must be created, which can be stored anywhere. " +
"CSV files can be created with Microsoft Excel.\n\n" +
"Column A: Category (e.g. Mechanical Equipment)\n" +
"Column B: Shared Parameter Group (User Determined)\n" +
"Column C: Data Type (e.g. Number, Integer, Text, YesNo)\n" +
"Column D: Binding Type (e.g. Instance, Type)\n" +
"Column E: Parameter Name (User Determined)\n\n" +
"Parameters are grouped under Data in Properties if Insert into Project Parameters is selected";
// create bitmap image for button
Uri uriLargeImage_SharedParameterCreator = new Uri(iconsPath + @"32x32\cmdSharedParameterCreator_32x32.bmp");
BitmapImage largeImage_SharedParameterCreator = new BitmapImage(uriLargeImage_SharedParameterCreator);
// create bitmap image for button
Uri uriSmallImage_SharedParameterCreator = new Uri(iconsPath + @"16x16\cmdSharedParameterCreator_16x16.bmp");
BitmapImage smallImage_SharedParameterCreator = new BitmapImage(uriSmallImage_SharedParameterCreator);
btnSharedParameterCreator.LargeImage = largeImage_SharedParameterCreator;
btnSharedParameterCreator.Image = smallImage_SharedParameterCreator;
#endregion
#region SheetRenamer
PushButtonData btnSheetRenamer = new PushButtonData("cmdSheetRenamer", "Sheet \nRenamer", commandsPath + "SheetRenamer.dll", "SheetRenamer.Class1");
btnSheetRenamer.ToolTip = "Renames all PDF files in a directory to the following naming convention: Project Number-Sheet Number_Current Revision";
btnSheetRenamer.LongDescription = "Create a sheet set within Revit and assign the sheets you want to print. Once the sheets are printed, browse to the directory where they are saved. " +
"Select the sheet set that you used to print and click OK.\n\n" +
"NOTE: Ensure that the Project Number is set within Project Information for proper file naming.";
// create bitmap image for button
Uri uriLargeImage_SheetRenamer = new Uri(iconsPath + @"32x32\cmdSheetRenamer_32x32.bmp");
BitmapImage largeImage_SheetRenamer = new BitmapImage(uriLargeImage_SheetRenamer);
// create bitmap image for button
Uri uriSmallImage_SheetRenamer = new Uri(iconsPath + @"16x16\cmdSheetRenamer_16x16.bmp");
BitmapImage smallImage_SheetRenamer = new BitmapImage(uriSmallImage_SheetRenamer);
btnSheetRenamer.LargeImage = largeImage_SheetRenamer;
btnSheetRenamer.Image = smallImage_SheetRenamer;
#endregion
#region ProjectParameters
PushButtonData btnProjectParameters = new PushButtonData("cmdProjectParameters", "Insert into \nProject Parameters", commandsPath + "ProjectParameters.dll", "ProjectParameters.Class1");
btnProjectParameters.ToolTip = "Insert Shared Parameters into Project Parameters";
btnProjectParameters.LongDescription = "1) Make sure a Shared Parameter file is loaded in Manage->Shared Parameters\n" +
"2) Click Load to fill the view with the Shared Parameters from the file\n" +
"3) Right click to set the Binding type (e.g. Instance or Type). This value must be set before selecting a Category.\n" +
"4) Right click to set the element Category (e.g. Mechanical Equipment, Walls, etc.)\n" +
"5) Right click to set the Properties Group. This is the category it will be grouped under in the Properties window.\n" +
"6) Click Insert to insert the Shared Parameters into Project Parameters";
// create bitmap image for button
Uri uriLargeImage_ProjectParameters = new Uri(iconsPath + @"32x32\cmdProjectParameters_32x32.bmp");
BitmapImage largeImage_ProjectParameters = new BitmapImage(uriLargeImage_ProjectParameters);
// create bitmap image for button
Uri uriSmallImage_ProjectParameters = new Uri(iconsPath + @"16x16\cmdProjectParameters_16x16.bmp");
BitmapImage smallImage_ProjectParameters = new BitmapImage(uriSmallImage_ProjectParameters);
btnProjectParameters.LargeImage = largeImage_ProjectParameters;
btnProjectParameters.Image = smallImage_ProjectParameters;
#endregion
#region ProductionPanelItems
// Create a ribbon panel
RibbonPanel pnlProductionPanel = application.CreateRibbonPanel(tabName, "Production");
// Add the buttons to the panel
List <RibbonItem> productionButtons = new List <RibbonItem>();
// Add the buttons to the panel
productionButtons.Add(pnlProductionPanel.AddItem(btnCreateRevitSheets));
productionButtons.Add(pnlProductionPanel.AddItem(btnSharedParameterCreator));
productionButtons.Add(pnlProductionPanel.AddItem(btnSheetRenamer));
productionButtons.Add(pnlProductionPanel.AddItem(btnProjectParameters));
#endregion
return(Result.Succeeded);
}
/// <summary>
/// Pulldown button for "Command Data", "DB Element" and "Element Filtering"
/// </summary>
public void AddPulldownButton(RibbonPanel panel)
{
// Create three push buttons for pulldown button drop down
// #1
PushButtonData pushButtonData1 = new PushButtonData("PulldownCommandData", "Command Data", _introLabPath, _introLabName + ".CommandData");
pushButtonData1.LargeImage = NewBitmapImage("Basics.ico");
// #2
PushButtonData pushButtonData2 = new PushButtonData("PulldownDbElement", "DB Element", _introLabPath, _introLabName + ".DBElement");
pushButtonData2.LargeImage = NewBitmapImage("Basics.ico");
// #3
PushButtonData pushButtonData3 = new PushButtonData("PulldownElementFiltering", "Filtering", _introLabPath, _introLabName + ".ElementFiltering");
pushButtonData3.LargeImage = NewBitmapImage("Basics.ico");
// Make a pulldown button now
PulldownButtonData pulldownBtnData = new PulldownButtonData("PulldownButton", "Pulldown");
PulldownButton pulldownBtn = panel.AddItem(pulldownBtnData) as PulldownButton;
pulldownBtn.AddPushButton(pushButtonData1);
pulldownBtn.AddPushButton(pushButtonData2);
pulldownBtn.AddPushButton(pushButtonData3);
}
void CreateRibbonItems(UIControlledApplication a)
{
// get the path of our dll
string addInPath = GetType().Assembly.Location;
string imgDir = FindFolderInParents(Path.GetDirectoryName(addInPath), "Images");
const string panelName = "Lab 6 Panel";
const string cmd1 = "XtraCs.Lab1_1_HelloWorld";
const string name1 = "HelloWorld";
const string text1 = "Hello World";
const string tooltip1 = "Run Lab1_1_HelloWorld command";
const string img1 = "ImgHelloWorld.png";
const string img31 = "ImgHelloWorldSmall.png";
const string cmd2 = "XtraCs.Lab1_2_CommandArguments";
const string name2 = "CommandArguments";
const string text2 = "Command Arguments";
const string tooltip2 = "Run Lab1_2_CommandArguments command";
const string img2 = "ImgCommandArguments.png";
const string img32 = "ImgCommandArgumentsSmall.png";
const string name3 = "Lab1Commands";
const string text3 = "Lab 1 Commands";
const string tooltip3 = "Run a Lab 1 command";
const string img33 = "ImgCommandSmall.png";
// create a Ribbon Panel
RibbonPanel panel = a.CreateRibbonPanel(panelName);
// add a button for Lab1's Hello World command
PushButtonData pbd = new PushButtonData(name1, text1, addInPath, cmd1);
PushButton pb1 = panel.AddItem(pbd) as PushButton;
pb1.ToolTip = tooltip1;
pb1.LargeImage = new BitmapImage(new Uri(Path.Combine(imgDir, img1)));
// add a vertical separation line in the panel
panel.AddSeparator();
// prepare data for creating stackable buttons
PushButtonData pbd1 = new PushButtonData(name1 + " 2", text1, addInPath, cmd1);
pbd1.ToolTip = tooltip1;
pbd1.Image = new BitmapImage(new Uri(Path.Combine(imgDir, img31)));
PushButtonData pbd2 = new PushButtonData(name2, text2, addInPath, cmd2);
pbd2.ToolTip = tooltip2;
pbd2.Image = new BitmapImage(new Uri(Path.Combine(imgDir, img32)));
PulldownButtonData pbd3 = new PulldownButtonData(name3, text3);
pbd3.ToolTip = tooltip3;
pbd3.Image = new BitmapImage(new Uri(Path.Combine(imgDir, img33)));
// add stackable buttons
IList <RibbonItem> ribbonItems = panel.AddStackedItems(pbd1, pbd2, pbd3);
// add two push buttons as sub-items of the Lab 1 commands
PulldownButton pb3 = ribbonItems[2] as PulldownButton;
pbd = new PushButtonData(name1, text1, addInPath, cmd1);
PushButton pb3_1 = pb3.AddPushButton(pbd);
pb3_1.ToolTip = tooltip1;
pb3_1.LargeImage = new BitmapImage(new Uri(Path.Combine(imgDir, img1)));
pbd = new PushButtonData(name2, text2, addInPath, cmd2);
PushButton pb3_2 = pb3.AddPushButton(pbd);
pb3_2.ToolTip = tooltip2;
pb3_2.LargeImage = new BitmapImage(new Uri(Path.Combine(imgDir, img2)));
}
/// <summary>
/// Text box
/// Text box used in conjunction with event. We'll come to this later.
/// For now, just shows how to make a text box.
/// </summary>
public void AddTextBox(RibbonPanel panel)
{
// Fill the text box information
TextBoxData txtBoxData = new TextBoxData("TextBox");
txtBoxData.Image = NewBitmapImage("Basics.ico");
txtBoxData.Name = "Text Box";
txtBoxData.ToolTip = "Enter text here";
txtBoxData.LongDescription = "<p>This is Revit UI Labs.</p><p>Ribbon Lab</p>";
txtBoxData.ToolTipImage = NewBitmapImage("ImgHelloWorld.png");
// Create the text box item on the panel
TextBox txtBox = panel.AddItem(txtBoxData) as TextBox;
txtBox.PromptText = "Enter a comment";
txtBox.ShowImageAsButton = true;
txtBox.EnterPressed += new EventHandler<Autodesk.Revit.UI.Events.TextBoxEnterPressedEventArgs>(txtBox_EnterPressed);
txtBox.Width = 180;
}
//添加面板选项卡
public static void MyRibbon()
{
if (UI.Global.isOpen == false)
{
Autodesk.AutoCAD.ApplicationServices.Application.ShowAlertDialog("请先打开一个工程！");
return;
}
Autodesk.Windows.RibbonControl ribbonControl = Autodesk.Windows.ComponentManager.Ribbon;
RibbonTab Tab = new RibbonTab();
//for (int i = 0; i < ribbonControl.Tabs.Count; i++)
//{
// if(ribbonControl.Tabs[i].Id == "RibbonSample_TAB_ID")
// {
// isOpen = true;
// }
//}
if (isOpen == false)
{
ribbonControl.Tabs.Add(Tab);
Tab.Title = " 煤矿工程 ";
Tab.Id = "RibbonSample_TAB_ID";
Autodesk.Windows.RibbonPanelSource panel1Panel = new RibbonPanelSource();
panel1Panel.Title = "手工绘制";
RibbonPanel Panel1 = new RibbonPanel();
Panel1.Source = panel1Panel;
Tab.Panels.Add(Panel1);
RibbonButton pan1button1 = new RibbonButton();
pan1button1.Text = "绘制方形";
pan1button1.ShowText = true;
//pan1button1.ShowImage = true;
//pan1button1.Image = Images.getBitmap(Forms.Resources.Small);
//pan1button1.LargeImage = Images.getBitmap(Forms.Resources.large);
pan1button1.Orientation = System.Windows.Controls.Orientation.Vertical;
pan1button1.Size = RibbonItemSize.Standard;
pan1button1.CommandHandler = new RibbonCommandHandler();
pan1button1.CommandParameter = "SqTunnel ";
panel1Panel.Items.Add(pan1button1);
RibbonButton pan1button2 = new RibbonButton();
pan1button2.Text = "绘制圆形";
pan1button2.ShowText = true;
//pan1button2.ShowImage = true;
//pan1button2.Image = Images.getBitmap(Forms.Resources.Small);
//pan1button2.LargeImage = Images.getBitmap(Forms.Resources.large);
pan1button2.Orientation = System.Windows.Controls.Orientation.Vertical;
pan1button2.Size = RibbonItemSize.Standard;
pan1button2.CommandHandler = new RibbonCommandHandler();
pan1button2.CommandParameter = "CylTunnel ";
panel1Panel.Items.Add(pan1button2);
RibbonButton pan1button3 = new RibbonButton();
pan1button3.Text = "绘制梯形";
pan1button3.ShowText = true;
//pan1button3.ShowImage = true;
//pan1button3.Image = Images.getBitmap(Forms.Resources.Small);
//pan1button3.LargeImage = Images.getBitmap(Forms.Resources.large);
pan1button3.Orientation = System.Windows.Controls.Orientation.Vertical;
pan1button3.Size = RibbonItemSize.Standard;
pan1button3.CommandHandler = new RibbonCommandHandler();
pan1button3.CommandParameter = "TrTunnel ";
panel1Panel.Items.Add(pan1button3);
RibbonPanelSource panel2Panel = new RibbonPanelSource();
panel2Panel.Title = "视图窗口";
RibbonPanel panel2 = new RibbonPanel();
panel2.Source = panel2Panel;
Tab.Panels.Add(panel2);
RibbonButton pan2button1 = new RibbonButton();
pan2button1.Text = "菜单列表";
pan2button1.ShowText = true;
//pan2button1.ShowImage = true;
//pan2button1.Image = Images.getBitmap(Forms.Resources.Small);
//pan2button1.LargeImage = Images.getBitmap(Forms.Resources.large);
pan2button1.Size = RibbonItemSize.Standard;
pan2button1.Orientation = System.Windows.Controls.Orientation.Vertical;
pan2button1.CommandHandler = new RibbonCommandHandler();
pan2button1.CommandParameter = "openTreeControl ";
panel2Panel.Items.Add(pan2button1);
RibbonButton pan3button1 = new RibbonButton();
pan3button1.Text = "坐标列表";
pan3button1.ShowText = true;
//pan3button1.ShowImage = true;
//pan3button1.Image = Images.getBitmap(Forms.Resources.Small);
//pan3button1.LargeImage = Images.getBitmap(Forms.Resources.large);
pan3button1.Size = RibbonItemSize.Standard;
pan3button1.Orientation = System.Windows.Controls.Orientation.Vertical;
pan3button1.CommandHandler = new RibbonCommandHandler();
pan3button1.CommandParameter = "openGridControl ";
panel2Panel.Items.Add(pan3button1);
RibbonPanelSource panel4Panel = new RibbonPanelSource();
panel4Panel.Title = "显示模式";
RibbonPanel panel4 = new RibbonPanel();
panel4.Source = panel4Panel;
Tab.Panels.Add(panel4);
RibbonButton pan4button1 = new RibbonButton();
pan4button1.Text = "切换模式";
pan4button1.ShowText = true;
//pan4button1.ShowImage = true;
//pan4button1.Image = Images.getBitmap(Forms.Resources.Small);
//pan4button1.LargeImage = Images.getBitmap(Forms.Resources.large);
pan4button1.Size = RibbonItemSize.Standard;
pan4button1.Orientation = System.Windows.Controls.Orientation.Vertical;
pan4button1.CommandHandler = new RibbonCommandHandler();
pan4button1.CommandParameter = "DisplayMode ";
panel4Panel.Items.Add(pan4button1);
RibbonButton pan5button1 = new RibbonButton();
pan5button1.Text = "演示动画";
pan5button1.ShowText = true;
//pan5button1.ShowImage = true;
//pan5button1.Image = Images.getBitmap(Forms.Resources.Small);
//pan5button1.LargeImage = Images.getBitmap(Forms.Resources.large);
pan5button1.Size = RibbonItemSize.Standard;
pan5button1.Orientation = System.Windows.Controls.Orientation.Vertical;
pan5button1.CommandHandler = new RibbonCommandHandler();
pan5button1.CommandParameter = "animate ";
panel4Panel.Items.Add(pan5button1);
RibbonButton pan6button1 = new RibbonButton();
pan6button1.Text = "特性面板";
pan6button1.ShowText = true;
//pan6button1.ShowImage = true;
//pan6button1.Image = Images.getBitmap(Forms.Resources.Small);
//pan6button1.LargeImage = Images.getBitmap(Forms.Resources.large);
pan6button1.Size = RibbonItemSize.Standard;
pan6button1.Orientation = System.Windows.Controls.Orientation.Vertical;
pan6button1.CommandHandler = new RibbonCommandHandler();
pan6button1.CommandParameter = "openPropertyControl ";
panel2Panel.Items.Add(pan6button1);
RibbonPanelSource panel7Panel = new RibbonPanelSource();
panel7Panel.Title = "数据传输";
RibbonPanel panel7 = new RibbonPanel();
panel7.Source = panel7Panel;
Tab.Panels.Add(panel7);
RibbonButton pan7button1 = new RibbonButton();
pan7button1.Text = "导出信息";
pan7button1.ShowText = true;
//pan7button1.ShowImage = true;
//pan7button1.Image = Images.getBitmap(Forms.Resources.Small);
//pan7button1.LargeImage = Images.getBitmap(Forms.Resources.large);
pan7button1.Size = RibbonItemSize.Standard;
pan7button1.Orientation = System.Windows.Controls.Orientation.Vertical;
pan7button1.CommandHandler = new RibbonCommandHandler();
pan7button1.CommandParameter = "OutGeoData ";
panel7Panel.Items.Add(pan7button1);
Tab.IsActive = true;
}
}
/// <summary>
/// Stacked Buttons - combination of: push button, dropdown button, combo box and text box.
/// (no radio button group, split buttons).
/// Here we stack three push buttons for "Command Data", "DB Element" and "Element Filtering".
/// </summary>
public void AddStackedButtons_Simple(RibbonPanel panel)
{
// Create three push buttons to stack up
// #1
PushButtonData pushButtonData1 = new PushButtonData("StackSimpleCommandData", "Command Data", _introLabPath, _introLabName + ".CommandData");
pushButtonData1.Image = NewBitmapImage("ImgHelloWorldSmall.png");
// #2
PushButtonData pushButtonData2 = new PushButtonData("StackSimpleDbElement", "DB Element", _introLabPath, _introLabName + ".DBElement");
pushButtonData2.Image = NewBitmapImage("ImgHelloWorldSmall.png");
// #3
PushButtonData pushButtonData3 = new PushButtonData("StackSimpleElementFiltering", "Element Filtering", _introLabPath, _introLabName + ".ElementFiltering");
pushButtonData3.Image = NewBitmapImage("ImgHelloWorldSmall.png");
// Put them on stack
IList<RibbonItem> stackedButtons = panel.AddStackedItems(pushButtonData1, pushButtonData2, pushButtonData3);
}
public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
{
try
{
//the Activate method is called by Inventor when it loads the addin
//the AddInSiteObject provides access to the Inventor Application object
//the FirstTime flag indicates if the addin is loaded for the first time
//initialize AddIn members
m_inventorApplication = addInSiteObject.Application;
Button.InventorApplication = m_inventorApplication;
//initialize event delegates
m_userInterfaceEvents = m_inventorApplication.UserInterfaceManager.UserInterfaceEvents;
UserInterfaceEventsSink_OnResetCommandBarsEventDelegate = new UserInterfaceEventsSink_OnResetCommandBarsEventHandler(UserInterfaceEvents_OnResetCommandBars);
m_userInterfaceEvents.OnResetCommandBars += UserInterfaceEventsSink_OnResetCommandBarsEventDelegate;
UserInterfaceEventsSink_OnResetEnvironmentsEventDelegate = new UserInterfaceEventsSink_OnResetEnvironmentsEventHandler(UserInterfaceEvents_OnResetEnvironments);
m_userInterfaceEvents.OnResetEnvironments += UserInterfaceEventsSink_OnResetEnvironmentsEventDelegate;
UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate = new UserInterfaceEventsSink_OnResetRibbonInterfaceEventHandler(UserInterfaceEvents_OnResetRibbonInterface);
m_userInterfaceEvents.OnResetRibbonInterface += UserInterfaceEventsSink_OnResetRibbonInterfaceEventDelegate;
//load image icons for UI items
Icon addSlotOptionIcon = new Icon(this.GetType(), "AddSlotOption.ico");
Icon drawSlotIcon = new Icon(this.GetType(), "DrawSlot.ico");
Icon toggleSlotStateIcon = new Icon(this.GetType(), "ToggleSlotState.ico");
//retrieve the GUID for this class
GuidAttribute addInCLSID;
addInCLSID = (GuidAttribute)GuidAttribute.GetCustomAttribute(typeof(AddInServer), typeof(GuidAttribute));
string addInCLSIDString;
addInCLSIDString = "{" + addInCLSID.Value + "}";
//create the comboboxes
m_slotWidthComboBoxDefinition = m_inventorApplication.CommandManager.ControlDefinitions.AddComboBoxDefinition("Slot Width", "Autodesk:SimpleAddIn:SlotWidthCboBox", CommandTypesEnum.kShapeEditCmdType, 100, addInCLSIDString, "Slot width", "Slot width", Type.Missing, Type.Missing, ButtonDisplayEnum.kDisplayTextInLearningMode);
m_slotHeightComboBoxDefinition = m_inventorApplication.CommandManager.ControlDefinitions.AddComboBoxDefinition("Slot Height", "Autodesk:SimpleAddIn:SlotHeightCboBox", CommandTypesEnum.kShapeEditCmdType, 100, addInCLSIDString, "Slot height", "Slot height", Type.Missing, Type.Missing, ButtonDisplayEnum.kDisplayTextInLearningMode);
//add some initial items to the comboboxes
m_slotWidthComboBoxDefinition.AddItem("1 cm", 0);
m_slotWidthComboBoxDefinition.AddItem("2 cm", 0);
m_slotWidthComboBoxDefinition.AddItem("3 cm", 0);
m_slotWidthComboBoxDefinition.AddItem("4 cm", 0);
m_slotWidthComboBoxDefinition.AddItem("5 cm", 0);
m_slotWidthComboBoxDefinition.ListIndex = 1;
m_slotWidthComboBoxDefinition.ToolTipText = m_slotWidthComboBoxDefinition.Text;
m_slotWidthComboBoxDefinition.DescriptionText = "Slot width: " + m_slotWidthComboBoxDefinition.Text;
SlotWidthComboBox_OnSelectEventDelegate = new ComboBoxDefinitionSink_OnSelectEventHandler(SlotWidthComboBox_OnSelect);
m_slotWidthComboBoxDefinition.OnSelect += SlotWidthComboBox_OnSelectEventDelegate;
m_slotHeightComboBoxDefinition.AddItem("1 cm", 0);
m_slotHeightComboBoxDefinition.AddItem("2 cm", 0);
m_slotHeightComboBoxDefinition.AddItem("3 cm", 0);
m_slotHeightComboBoxDefinition.AddItem("4 cm", 0);
m_slotHeightComboBoxDefinition.AddItem("5 cm", 0);
m_slotHeightComboBoxDefinition.ListIndex = 1;
m_slotHeightComboBoxDefinition.ToolTipText = m_slotHeightComboBoxDefinition.Text;
m_slotHeightComboBoxDefinition.DescriptionText = "Slot height: " + m_slotHeightComboBoxDefinition.Text;
SlotHeightComboBox_OnSelectEventDelegate = new ComboBoxDefinitionSink_OnSelectEventHandler(SlotHeightComboBox_OnSelect);
m_slotHeightComboBoxDefinition.OnSelect += SlotHeightComboBox_OnSelectEventDelegate;
//create buttons
m_addSlotOptionButton = new AddSlotOptionButton(
"Add Slot width/height", "Autodesk:SimpleAddIn:AddSlotOptionCmdBtn", CommandTypesEnum.kShapeEditCmdType,
addInCLSIDString, "Adds option for slot width/height",
"Add slot option", addSlotOptionIcon, addSlotOptionIcon, ButtonDisplayEnum.kDisplayTextInLearningMode);
m_drawSlotButton = new DrawSlotButton(
"Draw Slot", "Autodesk:SimpleAddIn:DrawSlotCmdBtn", CommandTypesEnum.kShapeEditCmdType,
addInCLSIDString, "Create slot sketch graphics",
"Draw Slot", drawSlotIcon, drawSlotIcon, ButtonDisplayEnum.kDisplayTextInLearningMode);
m_toggleSlotStateButton = new ToggleSlotStateButton(
"Toggle Slot State", "Autodesk:SimpleAddIn:ToggleSlotStateCmdBtn", CommandTypesEnum.kShapeEditCmdType,
addInCLSIDString, "Enables/Disables state of slot command",
"Toggle Slot State", toggleSlotStateIcon, toggleSlotStateIcon, ButtonDisplayEnum.kDisplayTextInLearningMode);
//create the command category
CommandCategory slotCmdCategory = m_inventorApplication.CommandManager.CommandCategories.Add("Slot", "Autodesk:SimpleAddIn:SlotCmdCat", addInCLSIDString);
slotCmdCategory.Add(m_slotWidthComboBoxDefinition);
slotCmdCategory.Add(m_slotHeightComboBoxDefinition);
slotCmdCategory.Add(m_addSlotOptionButton.ButtonDefinition);
slotCmdCategory.Add(m_drawSlotButton.ButtonDefinition);
slotCmdCategory.Add(m_toggleSlotStateButton.ButtonDefinition);
if (firstTime == true)
{
//access user interface manager
UserInterfaceManager userInterfaceManager;
userInterfaceManager = m_inventorApplication.UserInterfaceManager;
InterfaceStyleEnum interfaceStyle;
interfaceStyle = userInterfaceManager.InterfaceStyle;
//create the UI for classic interface
if (interfaceStyle == InterfaceStyleEnum.kClassicInterface)
{
//create toolbar
CommandBar slotCommandBar;
slotCommandBar = userInterfaceManager.CommandBars.Add("Slot", "Autodesk:SimpleAddIn:SlotToolbar", CommandBarTypeEnum.kRegularCommandBar, addInCLSIDString);
//add comboboxes to toolbar
slotCommandBar.Controls.AddComboBox(m_slotWidthComboBoxDefinition, 0);
slotCommandBar.Controls.AddComboBox(m_slotHeightComboBoxDefinition, 0);
//add buttons to toolbar
slotCommandBar.Controls.AddButton(m_addSlotOptionButton.ButtonDefinition, 0);
slotCommandBar.Controls.AddButton(m_drawSlotButton.ButtonDefinition, 0);
slotCommandBar.Controls.AddButton(m_toggleSlotStateButton.ButtonDefinition, 0);
//Get the 2d sketch environment base object
Inventor.Environment partSketchEnvironment;
partSketchEnvironment = userInterfaceManager.Environments["PMxPartSketchEnvironment"];
//make this command bar accessible in the panel menu for the 2d sketch environment.
partSketchEnvironment.PanelBar.CommandBarList.Add(slotCommandBar);
}
//create the UI for ribbon interface
else
{
//get the ribbon associated with part document
Inventor.Ribbons ribbons;
ribbons = userInterfaceManager.Ribbons;
Inventor.Ribbon partRibbon;
partRibbon = ribbons["Part"];
//get the tabls associated with part ribbon
RibbonTabs ribbonTabs;
ribbonTabs = partRibbon.RibbonTabs;
RibbonTab partSketchRibbonTab;
partSketchRibbonTab = ribbonTabs["id_TabSketch"];
//create a new panel with the tab
RibbonPanels ribbonPanels;
ribbonPanels = partSketchRibbonTab.RibbonPanels;
m_partSketchSlotRibbonPanel = ribbonPanels.Add("Slot", "Autodesk:SimpleAddIn:SlotRibbonPanel", "{DB59D9A7-EE4C-434A-BB5A-F93E8866E872}", "", false);
//add controls to the slot panel
CommandControls partSketchSlotRibbonPanelCtrls;
partSketchSlotRibbonPanelCtrls = m_partSketchSlotRibbonPanel.CommandControls;
//add the combo boxes to the ribbon panel
CommandControl slotWidthCmdCboBoxCmdCtrl;
slotWidthCmdCboBoxCmdCtrl = partSketchSlotRibbonPanelCtrls.AddComboBox(m_slotWidthComboBoxDefinition, "", false);
CommandControl slotHeightCmdCboBoxCmdCtrl;
slotHeightCmdCboBoxCmdCtrl = partSketchSlotRibbonPanelCtrls.AddComboBox(m_slotHeightComboBoxDefinition, "", false);
//add the buttons to the ribbon panel
CommandControl drawSlotCmdBtnCmdCtrl;
drawSlotCmdBtnCmdCtrl = partSketchSlotRibbonPanelCtrls.AddButton(m_drawSlotButton.ButtonDefinition, false, true, "", false);
CommandControl slotOptionCmdBtnCmdCtrl;
slotOptionCmdBtnCmdCtrl = partSketchSlotRibbonPanelCtrls.AddButton(m_addSlotOptionButton.ButtonDefinition, false, true, "", false);
CommandControl toggleSlotStateCmdBtnCmdCtrl;
toggleSlotStateCmdBtnCmdCtrl = partSketchSlotRibbonPanelCtrls.AddButton(m_toggleSlotStateButton.ButtonDefinition, false, true, "", false);
}
}
MessageBox.Show("To access the commands of the sample addin, activate a 2d sketch of a part \n document and select the \"AddInSlot\" toolbar within the panel menu");
}
catch (Exception e)
{
MessageBox.Show(e.ToString());
}
}
/// <summary>
/// Add buttons for the commands we define in this labs.
/// Here we stack three push buttons and repeat it as we get more.
/// This is a template to use during the Ribbon lab exercise prior to going to following labs.
/// </summary>
public void AddUILabsCommandButtons_Template(RibbonPanel panel)
{
// Get the location of this dll.
string assembly = GetType().Assembly.Location;
// Create three push buttons to stack up
// #1
PushButtonData pushButtonData1 = new PushButtonData("UILabsCommand1", "Command1", assembly, _uiLabName + ".Command1");
pushButtonData1.Image = NewBitmapImage("ImgHelloWorldSmall.png");
// #2
PushButtonData pushButtonData2 = new PushButtonData("UILabsCommand2", "Command2", assembly, _uiLabName + ".Command2");
pushButtonData2.Image = NewBitmapImage("ImgHelloWorldSmall.png");
// #3
PushButtonData pushButtonData3 = new PushButtonData("UILabsCommand3", "Command3", assembly, _uiLabName + ".Command3");
pushButtonData3.Image = NewBitmapImage("ImgHelloWorldSmall.png");
// Put them on stack
IList<RibbonItem> stackedButtons = panel.AddStackedItems(pushButtonData1, pushButtonData2, pushButtonData3);
}
public Result OnStartup(UIControlledApplication application)
{
//检测是否安装Excel及其版本
string excelNum = new Tool.ExcelTool().ExcelVarsion;
//动态链接库路径
string dllPath = typeof(Tab).Assembly.Location;
//Tab名称
string tabName = "Test";
//创建Tab
application.CreateRibbonTab(tabName);
//创建Panel
RibbonPanel mainPanel = application.CreateRibbonPanel(tabName, "Excel Tool");
//创建按钮
PushButtonData PBD_createExcel = new PushButtonData("CreateExcel", "导出数据", dllPath, "CalcTest.Command.CreateExcelFile");
PushButton PB_createExcel = mainPanel.AddItem(PBD_createExcel) as PushButton;
//PushButtonData PBD_linkExcel = new PushButtonData("LinkExcel", "创建实时连接", dllPath, "CalcTest.Command.LinkExcelFile");
//PushButton PB_linkExcel = mainPanel.AddItem(PBD_linkExcel) as PushButton;
//PB_linkExcel.AvailabilityClassName = "CalcTest.LinkExcelEnable";
RadioButtonGroupData RBGD_linkExcel = new RadioButtonGroupData("Link_test");
RadioButtonGroup RBG_linkExcel = mainPanel.AddItem(RBGD_linkExcel) as RadioButtonGroup;
ToggleButton TB_linkExcel = RBG_linkExcel.AddItem(new ToggleButtonData("link_enable", "创建实时连接", dllPath, "CalcTest.Command.test_linkExcel"));
ToggleButton TB_dislinkExcel = RBG_linkExcel.AddItem(new ToggleButtonData("link_disable", "关闭实时连接"));
TB_dislinkExcel.Visible = false;
RBG_linkExcel.Current = TB_dislinkExcel;
TB_linkExcel.AvailabilityClassName = "CalcTest.LinkExcelEnable";
//判断本机是否安装Excel
if (excelNum != "")
{
//Excel名称及路径
//string fileName = "pipeCalc";
string fullName = Environment.GetFolderPath(Environment.SpecialFolder.DesktopDirectory) + @"\test\PlumbingCalc.xlsx";
//Sheet1名称
string sheetName = "给排水工程量";
//更新器
Updater.PipeParameterUpdater ppu = new Updater.PipeParameterUpdater(application.ActiveAddInId, fullName, sheetName);
UpdaterId updaterId = ppu.GetUpdaterId();
//注册更新器
if (!UpdaterRegistry.IsUpdaterRegistered(updaterId))
{
UpdaterRegistry.RegisterUpdater(ppu);
}
//默认关闭
UpdaterRegistry.DisableUpdater(updaterId);
//过滤器
//FilteredElementCollector plumbingCollector = new FilteredElementCollector(doc);
ElementIsElementTypeFilter filter1 = new ElementIsElementTypeFilter(true);
List <ElementFilter> filterSet = new List <ElementFilter>();
filterSet.Add(new ElementCategoryFilter(BuiltInCategory.OST_PipeCurves));
filterSet.Add(new ElementCategoryFilter(BuiltInCategory.OST_PipeAccessory));
LogicalOrFilter orFilter = new LogicalOrFilter(filterSet);
LogicalAndFilter andFilter = new LogicalAndFilter(filter1, orFilter);
//订阅事件
//标高参数改变
UpdaterRegistry.AddTrigger(updaterId, andFilter, Element.GetChangeTypeParameter(new ElementId(BuiltInParameter.RBS_START_LEVEL_PARAM)));
//系统类型参数改变
UpdaterRegistry.AddTrigger(updaterId, andFilter, Element.GetChangeTypeParameter(new ElementId(BuiltInParameter.RBS_PIPING_SYSTEM_TYPE_PARAM)));
//尺寸参数改变
UpdaterRegistry.AddTrigger(updaterId, andFilter, Element.GetChangeTypeParameter(new ElementId(BuiltInParameter.RBS_CALCULATED_SIZE)));
//长度参数改变
UpdaterRegistry.AddTrigger(updaterId, andFilter, Element.GetChangeTypeParameter(new ElementId(BuiltInParameter.CURVE_ELEM_LENGTH)));
//元素添加
UpdaterRegistry.AddTrigger(updaterId, andFilter, Element.GetChangeTypeElementAddition());
//元素删除
UpdaterRegistry.AddTrigger(updaterId, andFilter, Element.GetChangeTypeElementDeletion());
}
return(Result.Succeeded);
}
public PaneCommands(ViewsManager views, RibbonPanel panel)
{
_views = views;
InitCommands(panel);
}
/// <summary>
/// Split button for "Command Data", "DB Element" and "Element Filtering"
/// </summary>
public void AddSplitButton(RibbonPanel panel)
{
// Create three push buttons for split button drop down
// #1
PushButtonData pushButtonData1 = new PushButtonData("SplitCommandData", "Command Data", _introLabPath, _introLabName + ".CommandData");
pushButtonData1.LargeImage = NewBitmapImage("ImgHelloWorld.png");
// #2
PushButtonData pushButtonData2 = new PushButtonData("SplitDbElement", "DB Element", _introLabPath, _introLabName + ".DBElement");
pushButtonData2.LargeImage = NewBitmapImage("ImgHelloWorld.png");
// #3
PushButtonData pushButtonData3 = new PushButtonData("SplitElementFiltering", "ElementFiltering", _introLabPath, _introLabName + ".ElementFiltering");
pushButtonData3.LargeImage = NewBitmapImage("ImgHelloWorld.png");
// Make a split button now
SplitButtonData splitBtnData = new SplitButtonData("SplitButton", "Split Button");
SplitButton splitBtn = panel.AddItem(splitBtnData) as SplitButton;
splitBtn.AddPushButton(pushButtonData1);
splitBtn.AddPushButton(pushButtonData2);
splitBtn.AddPushButton(pushButtonData3);
}
public Result OnStartup(UIControlledApplication application)
{
//创建功能区选项卡 如、文件、建筑
application.CreateRibbonTab("_revitApi_ tools");
//创建功能区选项卡上的功能区
RibbonPanel rp_main = application.CreateRibbonPanel("_revitApi_ tools", "Test Tools");
//单个功能按钮，可设定图标
PushButton pb_TemperSensor_new = rp_main.AddItem(new PushButtonData("TemperSensor_new", "SensorDataSynTest", projectAssemblyFullPath("MQTT_Revit\\MQTT_Revit_wpf.dll"), "MQTT_Revit_wpf.CMD")) as PushButton;
pb_TemperSensor_new.LargeImage = new BitmapImage(new Uri(iconFullPath("TemperatureSensor_96.png")));
//堆叠功能按钮，文字列表显示
//PushButtonData pbd_site_family_edit = new PushButtonData("SitePlanFamilyEditor", "体块编辑", projectAssemblyFullPath("SitePlanFamilyEditor.dll"), "SitePlanFamilyEditor.CMD");
//PushButtonData pbd_site_family_select = new PushButtonData("SitePlanBuildingBlockSelector", "体块选择", projectAssemblyFullPath("SitePlanBuildingBlockSelector.dll"), "SitePlanBuildingBlockSelector.CMD");
//PushButtonData pbd_color_pallete = new PushButtonData("FastColorPalette", "调色板增强", projectAssemblyFullPath("FastColorPalette.dll"), "FastColorPalette.CMD");
//rp_sitePlan.AddStackedItems(
// pbd_site_family_edit,
// pbd_site_family_select,
// pbd_color_pallete);
//application.CreateRibbonTab("goa tools 模型");
//application.CreateRibbonTab("goa tools 制图");
//application.CreateRibbonTab("goa tools 模块");
/*
#region model tab
* //SITE PLANNING panel
* RibbonPanel rp_sitePlan = application.CreateRibbonPanel("goa tools 模型", "总图规划");
* //ANLS_SOLA
* PushButton pb_anls_sola = rp_sitePlan.AddItem(new PushButtonData("ANLS_SOLA", "日照分析", projectAssemblyFullPath("ANLS_SOLA.dll"), "ANLS_SOLA.CMD")) as PushButton;
* pb_anls_sola.LargeImage = new BitmapImage(new Uri(iconFullPath("ANLS_SOLA_96.png")));
* //Stack items
* PushButtonData pbd_site_family_edit = new PushButtonData("SitePlanFamilyEditor", "体块编辑", projectAssemblyFullPath("SitePlanFamilyEditor.dll"), "SitePlanFamilyEditor.CMD");
* PushButtonData pbd_site_family_select = new PushButtonData("SitePlanBuildingBlockSelector", "体块选择", projectAssemblyFullPath("SitePlanBuildingBlockSelector.dll"), "SitePlanBuildingBlockSelector.CMD");
* PushButtonData pbd_color_pallete = new PushButtonData("FastColorPalette", "调色板增强", projectAssemblyFullPath("FastColorPalette.dll"), "FastColorPalette.CMD");
* rp_sitePlan.AddStackedItems(
* pbd_site_family_edit,
* pbd_site_family_select,
* pbd_color_pallete);
*
* //ANLS panel
* RibbonPanel rp_anls = application.CreateRibbonPanel("goa tools 模型", "设计分析");
* //Surface Area
* PushButtonData pbd_surfaceAreaSingle = new PushButtonData("surfaceAreaSingle", "单个表面", projectAssemblyFullPath("GeometricSurfaceArea.dll"), "GeometricSurfaceArea.CMD");
* PushButtonData pbd_surfaceAreaMultiple = new PushButtonData("surfaceAreaMultiple", "多个表面", projectAssemblyFullPath("GeometricSurfacesArea.dll"), "GeometricSurfacesArea.CMD");
* PulldownButtonData pdbd_surfaceArea = new PulldownButtonData("surfaceArea", "表面面积");
* PulldownButton pdb_surfaceArea = rp_anls.AddItem(pdbd_surfaceArea) as PulldownButton;
* pdb_surfaceArea.AddPushButton(pbd_surfaceAreaSingle);
* pdb_surfaceArea.AddPushButton(pbd_surfaceAreaMultiple);
* pdb_surfaceArea.LargeImage = new BitmapImage(new Uri(iconFullPath("FACE_AREA_96.png")));
*
* //COMP panel
* RibbonPanel rp_comp = application.CreateRibbonPanel("goa tools 模型", "构件管理");
* //COMP_MANG button
* PushButton pb_comp_mang = rp_comp.AddItem(new PushButtonData("COMP_MANG", "组件管理", projectAssemblyFullPath("COMP_MANG.dll"), "COMP_MANG.CMD")) as PushButton;
* pb_comp_mang.LargeImage = new BitmapImage(new Uri(iconFullPath("COMP_MANG_96.png")));
* //FAMI_REPL button
* PushButton pb_fami_repl = rp_comp.AddItem(new PushButtonData("FAMI_REPL", "族库替换", projectAssemblyFullPath("FAMI_REPL.dll"), "FAMI_REPL.CMD")) as PushButton;
* pb_fami_repl.LargeImage = new BitmapImage(new Uri(iconFullPath("FAMI_REPL_96.png")));
* //PARA_COPY
* PushButton pb_para_copy = rp_comp.AddItem(new PushButtonData("PARA_COPY", "参数复制", projectAssemblyFullPath("PARA_COPY.dll"), "PARA_COPY.CMD")) as PushButton;
* pb_para_copy.LargeImage = new BitmapImage(new Uri(iconFullPath("PARA_COPY_96.png")));
* //TransGroupParas
* PushButton pb_trans_groupParas = rp_comp.AddItem(new PushButtonData("TransGroupParas", "组内族参数传递", projectAssemblyFullPath("TransGroupParas.dll"), "TransGroupParas.CMD")) as PushButton;
* pb_trans_groupParas.LargeImage = new BitmapImage(new Uri(iconFullPath("TransGroupParas_96.png")));
*
* //MODELLING panel
* RibbonPanel rp_model = application.CreateRibbonPanel("goa tools 模型", "建模工具");
* //stacked items group 1
* var pbd_selc_dependents = new PushButtonData("SELC_DPNT", "选择附属图元", projectAssemblyFullPath("SELC_DPNT.dll"), "SELC_DPNT.CMD");
* var pbd_selc_group_of_same_level = new PushButtonData("selectAllGroup", "选择同层模型组", projectAssemblyFullPath("selectAllGroup.dll"), "selectAllGroup.CMD");
* var pbd_join_mult = new PushButtonData("JOIN_MULT", "批量连接", projectAssemblyFullPath("JOIN_MULT.dll"), "JOIN_MULT.CMD");
* rp_model.AddStackedItems(
* pbd_selc_dependents,
* pbd_selc_group_of_same_level,
* pbd_join_mult);
* //stacked items group 2
* var pbd_wall_miter = new PushButtonData("wallMiterConnect", "墙批量改斜接", projectAssemblyFullPath("wallMiterConnect.dll"), "wallMiterConnect.CMD");
* var pbd_comment_mgr = new PushButtonData("commentMgr", "注释管理", projectAssemblyFullPath("CommentMgr.dll"), "CommentMgr.CMD");
* var pbd_arry_tool = new PushButtonData("arryTool", "沿路径阵列", projectAssemblyFullPath("ARRY_TOOL.dll"), "ARRY_TOOL.CMD");
* rp_model.AddStackedItems(
* pbd_wall_miter,
* pbd_comment_mgr,
* pbd_arry_tool);
* //stacked items group 3
* var pbd_move_3d = new PushButtonData("pointToPoint3DMove", "三维移动", projectAssemblyFullPath("pointToPoint3DMove.dll"), "pointToPoint3DMove.CMD");
* var pbd_cut_geometry = new PushButtonData("CutGeometry", "切割形体", projectAssemblyFullPath("CutGeometry.dll"), "CutGeometry.CMD");
*
* rp_model.AddStackedItems(
* pbd_move_3d,
* pbd_cut_geometry);
*
* //stacked items group 4
* var pbd_super_mirror = new PushButtonData("superMirror", "超级镜像", projectAssemblyFullPath("GROUP_CREATE.dll"), "GROUP_CREATE.Mirror_Pick");
* var pbd_fractionChecker = new PushButtonData("fractionChecker", "碎数检查", projectAssemblyFullPath("FractionNumberChecker.dll"), "FractionNumberChecker.CMD");
*
* rp_model.AddStackedItems(
* pbd_super_mirror,
* pbd_fractionChecker);
*
* //FAM_CVTR
* PushButton pb_fam_cvtr = rp_comp.AddItem(new PushButtonData("familyConvertor", "族转换", projectAssemblyFullPath("FAMI_CVTR.dll"), "FAMI_CVTR.CMD")) as PushButton;
* //need icon?
*
* //LEVL_EDIT
* PushButton pb_levl_edit = rp_model.AddItem(new PushButtonData("LEVL_EDIT", "修改层高", projectAssemblyFullPath("LEVL_EDIT.dll"), "LEVL_EDIT.CMD")) as PushButton;
* pb_levl_edit.LargeImage = new BitmapImage(new Uri(iconFullPath("LEVL_EDIT_96.png")));
* //PLAN_EDIT
* PushButton pb_smart_stretch = rp_model.AddItem(new PushButtonData("SmartStretch", "智能拉伸", projectAssemblyFullPath("SmartStretch.dll"), "SmartStretch.CMD")) as PushButton;
* pb_smart_stretch.LargeImage = new BitmapImage(new Uri(iconFullPath("SmartStretch_96.png")));
*
* //Layout Parking Effcient
* RibbonPanel rp_ParkingLayout = application.CreateRibbonPanel("goa tools 模型", "地库强排");
* PushButton Parking_Layout = rp_ParkingLayout.AddItem(new PushButtonData("ParkingLayoutEfficientNewStructual", "地库强排", projectAssemblyFullPath("ParkingLayoutEfficientNewStructual.dll"), "ParkingLayoutEfficientNewStructual.CMD")) as PushButton;
* Parking_Layout.LargeImage = new BitmapImage(new Uri(iconFullPath("LayoutParking_96.png")));
*
* //basement design toolset
* var pbd_bsmt_buildingBlocks = new PushButtonData("BSMT_BuildingBlocks", "地上楼栋", projectAssemblyFullPath("BSMT_BuildingBlocks.dll"), "BSMT_BuildingBlocks.CMD");
* var pbd_bsmt_excavation = new PushButtonData("BSMT_Excavation", "土方估算", projectAssemblyFullPath("BSMT_Excavation.dll"), "BSMT_Excavation.CMD");
* var pbd_bsmt_regions = new PushButtonData("BSMT_Regions", "分区面积", projectAssemblyFullPath("BSMT_Regions.dll"), "BSMT_Regions.CMD");
* rp_ParkingLayout.AddStackedItems(
* pbd_bsmt_buildingBlocks,
* pbd_bsmt_excavation,
* pbd_bsmt_regions);
*
* //Dwelling_Assembly
* RibbonPanel rp_Dwellinglayout = application.CreateRibbonPanel("goa tools 模型", "户型库");
* PushButton Dwelling_Assembly = rp_Dwellinglayout.AddItem(new PushButtonData("Dwelling_Assembly", "户型库", projectAssemblyFullPath("Dwelling_Assembly.dll"), "Dwelling_Assembly.CMD")) as PushButton;
*
* //user assistant panel
* RibbonPanel rp_userAssistant = application.CreateRibbonPanel("goa tools 模型", "智能助手");
* PushButton pb_userAssistant = rp_userAssistant.AddItem(new PushButtonData("userAssistant", "设置", projectAssemblyFullPath("UserAssistant.dll"), "UserAssistant.CMD")) as PushButton;
*
* //building modeling panel
* RibbonPanel rp_highrise = application.CreateRibbonPanel("goa tools 模型", "楼栋建模");
* //PLAN_DSGN_TOOLS
* PushButton pb_plan_tools = rp_highrise.AddItem(new PushButtonData("PLAN_DSGN_TOOLS", "户型工具", projectAssemblyFullPath("PLAN_DSGN_TOOLS.dll"), "PLAN_DSGN_TOOLS.CMD")) as PushButton;
* pb_plan_tools.LargeImage = new BitmapImage(new Uri(iconFullPath("PLAN_EDIT_96.png")));
* //FACD_DSGN_TOOLS
* PushButton pb_facd_tools = rp_highrise.AddItem(new PushButtonData("FACD_DSGN_TOOLS", "造型工具", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD")) as PushButton;
* pb_facd_tools.LargeImage = new BitmapImage(new Uri(iconFullPath("PROF_EDIT_96.png")));
*
* //FACD_DSGN_TOOLS_RibbonButtons
* RibbonPanel rp_facade_hotKeys = application.CreateRibbonPanel("goa tools 模型", "造型工具快捷键");
* var pbd_facade_dyMoStartEnd = new PushButtonData("dyMoStartEnd", "动态模块", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_DymoSessionStartEnd");
* var pbd_facade_dyMoDispose = new PushButtonData("dyMoDispose", "放弃模块", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_DymoSessionDispose");
* rp_facade_hotKeys.AddStackedItems(
* pbd_facade_dyMoStartEnd,
* pbd_facade_dyMoDispose);
*
* var pbd_facade_dyMoMode1 = new PushButtonData("dymoMode1", "模式P", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_DymoMode_1");
* var pbd_facade_dyMoMode2 = new PushButtonData("dymoMode2", "模式E", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_DymoMode_2");
* var pbd_facade_dyMoMode3 = new PushButtonData("dymoMode3", "模式M", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_DymoMode_3");
* rp_facade_hotKeys.AddStackedItems(
* pbd_facade_dyMoMode1,
* pbd_facade_dyMoMode2,
* pbd_facade_dyMoMode3);
*
* var pbd_autoSwitchEnd = new PushButtonData("autoSwitchEnd", "端头切换", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_AutoSwitchEnd");
* var pbd_facade_switchTransparency = new PushButtonData("switchTransparency", "切换透明", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_switchTransparency");
* var pbd_facade_pushFace = new PushButtonData("pushFace", "推拉形体", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_pushFace");
* rp_facade_hotKeys.AddStackedItems(
* pbd_autoSwitchEnd,
* pbd_facade_switchTransparency,
* pbd_facade_pushFace);
*
* var pbd_facade_trimExt = new PushButtonData("facade_trimExt", "修剪/延伸", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_trimExt");
* var pbd_facade_trimCorner = new PushButtonData("facade_trimCorner", "修剪为角", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_trimCorner");
* var pbd_facade_split = new PushButtonData("facade_split", "截断", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_split");
* rp_facade_hotKeys.AddStackedItems(
* pbd_facade_trimExt,
* pbd_facade_trimCorner,
* pbd_facade_split);
*
* var pbd_facade_alignMove = new PushButtonData("facade_alignMove", "对齐移动", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_alignMove");
* var pbd_facade_alignCopy = new PushButtonData("facade_alignCopy", "对齐复制", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_alignCopy");
* rp_facade_hotKeys.AddStackedItems(
* pbd_facade_alignMove,
* pbd_facade_alignCopy);
*
* var pbd_facade_selectCompsFiltered = new PushButtonData("facade_selectCompsFiltered", "选择/过滤", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_selectCompsFiltered");
* var pbd_facade_mirrorComps = new PushButtonData("facade_mirrorComps", "镜像", projectAssemblyFullPath("FACD_DSGN_TOOLS.dll"), "FACD_DSGN_TOOLS.CMD_callFromRibbon_mirrorComps");
* rp_facade_hotKeys.AddStackedItems(
* pbd_facade_selectCompsFiltered,
* pbd_facade_mirrorComps);
#endregion model tab
*
#region drafting tab
* //GRID panel
* RibbonPanel rp_grid = application.CreateRibbonPanel("goa tools 制图", "轴网工具");
* //GRID_IDEN button
* PushButton pb_grid_iden = rp_grid.AddItem(new PushButtonData("GRID_IDEN", "标头线", projectAssemblyFullPath("GRID_IDEN.dll"), "GRID_IDEN.CMD")) as PushButton;
* pb_grid_iden.LargeImage = new BitmapImage(new Uri(iconFullPath("GRID_IDEN_96.png")));
* //DATM_ON_OFF button
* PushButton pb_datm_onoff = rp_grid.AddItem(new PushButtonData("DATM_ON_OFF", "开/关", projectAssemblyFullPath("DATM_ON_OFF.dll"), "DATM_ON_OFF.CMD")) as PushButton;
* pb_datm_onoff.LargeImage = new BitmapImage(new Uri(iconFullPath("DATM_ON_OFF_96.png")));
* //GRID_RNAM button
* PushButtonData pdb_grid_rnam_true = new PushButtonData("GRID_Number", "真轴号", projectAssemblyFullPath("GRID_Number.dll"), "GRID_Number.CMD");
* PushButtonData pdb_grid_rnam_falseC = new PushButtonData("FakeGRID_NumberCreat", "假轴号创建", projectAssemblyFullPath("FakeGRID_NumberCreat.dll"), "FakeGRID_NumberCreat.CMD");
* PushButtonData pdb_grid_rnam_falseR = new PushButtonData("replaeFakeGridNum", "假轴号替换", projectAssemblyFullPath("replaeFakeGridNum.dll"), "replaeFakeGridNum.CMD");
* PulldownButtonData pdbd_grid_rnam = new PulldownButtonData("GridNumber", "重命名");
* PulldownButton pdb_GridName = rp_grid.AddItem(pdbd_grid_rnam) as PulldownButton;
* pdb_GridName.AddPushButton(pdb_grid_rnam_true);
* pdb_GridName.AddPushButton(pdb_grid_rnam_falseC);
* pdb_GridName.AddPushButton(pdb_grid_rnam_falseR);
* pdb_GridName.LargeImage = new BitmapImage(new Uri(iconFullPath("GRID_RNAM_96.png")));
*
* //ANNO panel
* RibbonPanel rp_anno = application.CreateRibbonPanel("goa tools 制图", "快捷标注");
* //ANNO_AREA button
* PushButton pb_anno_area = rp_anno.AddItem(new PushButtonData("ANNO_AREA", "分区面积", projectAssemblyFullPath("ANNO_AREA.dll"), "ANNO_AREA.CMD")) as PushButton;
* pb_anno_area.LargeImage = new BitmapImage(new Uri(iconFullPath("ANNO_AREA_96.png")));
* //ANNO_DIST button
* PushButton pb_anno_dist = rp_anno.AddItem(new PushButtonData("ANNO_DIST", "疏散距离", projectAssemblyFullPath("ANNO_DIST.dll"), "ANNO_DIST.CMD")) as PushButton;
* pb_anno_dist.LargeImage = new BitmapImage(new Uri(iconFullPath("ANNO_DIST_96.png")));
* //ANNO_ELEV button
* PushButton pb_anno_elev = rp_anno.AddItem(new PushButtonData("ANNO_ELEV", "降板标高", projectAssemblyFullPath("ANNO_ELEV.dll"), "ANNO_ELEV.CMD")) as PushButton;
* pb_anno_elev.LargeImage = new BitmapImage(new Uri(iconFullPath("ANNO_ELEV_96.png")));
* //ANNO_ELEV_ABSL button
* PushButton pb_anno_elev_absl = rp_anno.AddItem(new PushButtonData("ANNO_ELEV_ABSL", "绝对标高", projectAssemblyFullPath("ANNO_ELEV_ABSL.dll"), "ANNO_ELEV_ABSL.CMD")) as PushButton;
* pb_anno_elev_absl.LargeImage = new BitmapImage(new Uri(iconFullPath("ANNO_ELEV_ABSL_96.png")));
* //ANNO_AVOD button
* PushButton pb_anno_avod = rp_anno.AddItem(new PushButtonData("ANNO_AVOD", "尺寸避让", projectAssemblyFullPath("ANNO_AVOD.dll"), "ANNO_AVOD.CMD")) as PushButton;
* pb_anno_avod.LargeImage = new BitmapImage(new Uri(iconFullPath("ANNO_AVOD_96.png")));
* //ANNO_ELEV_MULT button
* PushButton pb_anno_elev_mult = rp_anno.AddItem(new PushButtonData("ANNO_ELEV_MULT", "多重标高", projectAssemblyFullPath("ANNO_ELEV_MULT.dll"), "ANNO_ELEV_MULT.CMD")) as PushButton;
* pb_anno_elev_mult.LargeImage = new BitmapImage(new Uri(iconFullPath("ANNO_ELEV_MULT_96.png")));
* PushButton pb_anno_openingElevation = rp_anno.AddItem(new PushButtonData("ANNO_OPEN_ELEV", "窗高标高", projectAssemblyFullPath("SportDimensionDemo.dll"), "SportDimensionDemo.WindowsAndDoors")) as PushButton;
* //need icon?
* //stack items 1
* PushButtonData pbd_fakeElev_Refresh = new PushButtonData("FakeElev_Refresh", "假标高计算", projectAssemblyFullPath("FakeElev_Refresh.dll"), "FakeElev_Refresh.CMD");
* PushButtonData pbd_autoFillUpElevations = new PushButtonData("AutoFillUpLevelHeightAnnotation", "填写多重标高", projectAssemblyFullPath("AutoFillUpLevelHeightAnnotation.dll"), "AutoFillUpLevelHeightAnnotation.CMD");
* rp_anno.AddStackedItems
* (pbd_fakeElev_Refresh,
* pbd_autoFillUpElevations);
*
*
*
* //DRAW panel
* RibbonPanel rp_draw = application.CreateRibbonPanel("goa tools 制图", "制图工具");
* //DRAW_PATT
* PushButton pb_draw_patt = rp_draw.AddItem(new PushButtonData("DRAW_PATT", "截面填充", projectAssemblyFullPath("DRAW_PATT.dll"), "DRAW_PATT.CMD")) as PushButton;
* pb_draw_patt.LargeImage = new BitmapImage(new Uri(iconFullPath("DRAW_PATT_96.png")));
* //FAKE_DIMS
* PushButton pb_fake_dims = rp_draw.AddItem(new PushButtonData("FAKE_DIMS", "尺寸标注", projectAssemblyFullPath("FAKE_DIMS.dll"), "FAKE_DIMS.CMD")) as PushButton;
* pb_fake_dims.LargeImage = new BitmapImage(new Uri(iconFullPath("FAKE_DIMS_96.png")));
* //LINE_ROAD
* PushButton pd_line_road = rp_draw.AddItem(new PushButtonData("LINE_ROAD", "单线变路", projectAssemblyFullPath("LINE_ROAD.dll"), "LINE_ROAD.CMD")) as PushButton;
* pd_line_road.LargeImage = new BitmapImage(new Uri(iconFullPath("LINE_ROAD_96.png")));
* //COLR_SWIT
* PushButton pb_colr_swit = rp_draw.AddItem(new PushButtonData("COLR_SWIT", "颜色切换", projectAssemblyFullPath("COLR_SWIT.dll"), "COLR_SWIT.CMD")) as PushButton;
* pb_colr_swit.LargeImage = new BitmapImage(new Uri(iconFullPath("COLR_SWIT_96.png")));
* //WIND_NUMB
* PushButton pb_wind_numb = rp_draw.AddItem(new PushButtonData("WIND_NUMB_new", "门窗编号", projectAssemblyFullPath("WIND_NUMB_new.dll"), "WIND_NUMB_new.CMD")) as PushButton;
* pb_wind_numb.LargeImage = new BitmapImage(new Uri(iconFullPath("WIND_NUMB_96.png")));
*
* //VIEW panel
* RibbonPanel rp_view = application.CreateRibbonPanel("goa tools 制图", "视图工具");
* //VIEW_INTF button
* PushButton pb_view_intf = rp_view.AddItem(new PushButtonData("VIEW_INTF", "提资视图", projectAssemblyFullPath("VIEW_INTF.dll"), "VIEW_INTF.CMD")) as PushButton;
* pb_view_intf.LargeImage = new BitmapImage(new Uri(iconFullPath("VIEW_INTF_96.png")));
* PushButton pb_type_on_off = rp_view.AddItem(new PushButtonData("TYPE_ON_OFF", "类型开关", projectAssemblyFullPath("TYPE_ON_OFF.dll"), "TYPE_ON_OFF.CMD")) as PushButton;
* pb_type_on_off.LargeImage = new BitmapImage(new Uri(iconFullPath("TYPE_ON_OFF_96.png")));
* PushButton pb_west_on_off = rp_view.AddItem(new PushButtonData("WSET_ON_OFF", "工作集开关", projectAssemblyFullPath("WSET_ON_OFF.dll"), "WSET_ON_OFF.CMD")) as PushButton;
* pb_west_on_off.LargeImage = new BitmapImage(new Uri(iconFullPath("WSET_ON_OFF_96.png")));
* //stacked items 1
* PushButtonData pbd_view_duplicate = new PushButtonData("VIEW_Duplicate", "视图复制", projectAssemblyFullPath("VIEW_Duplicate.dll"), "VIEW_Duplicate.CMD");
* PushButtonData pbd_detailGroupVisibility = new PushButtonData("DetailGroupVisibility", "详图组可见", projectAssemblyFullPath("DetailGroupVisibility.dll"), "DetailGroupVisibility.CMD");
* PushButtonData pbd_checkShareAnnotation = new PushButtonData("CheckShareAnnotation", "检查问题尺寸", projectAssemblyFullPath("CheckShareAnnotation.dll"), "CheckShareAnnotation.CMD");
* rp_view.AddStackedItems(pbd_view_duplicate, pbd_detailGroupVisibility, pbd_checkShareAnnotation);
*
* //SHET panel
* RibbonPanel rp_shet = application.CreateRibbonPanel("goa tools 制图", "布图工具");
* //SHET_LOCA button
* PushButton pb_shet_loca = rp_shet.AddItem(new PushButtonData("SHET_LOCA", "区位图", projectAssemblyFullPath("SHET_LOCA.dll"), "SHET_LOCA.CMD")) as PushButton;
* pb_shet_loca.LargeImage = new BitmapImage(new Uri(iconFullPath("SHET_LOCA_96.png")));
* //SHET_INFO button
* PushButton pb_shet_info = rp_shet.AddItem(new PushButtonData("SHET_INFO", "图签信息", projectAssemblyFullPath("SHET_INFO.dll"), "SHET_INFO.CMD")) as PushButton;
* pb_shet_info.LargeImage = new BitmapImage(new Uri(iconFullPath("SHET_INFO_96.png")));
* //SHET_NEW button
* PushButton pb_shet_new = rp_shet.AddItem(new PushButtonData("SHET_NEW", "创建图纸", projectAssemblyFullPath("SHET_NEW.dll"), "SHET_NEW.CMD")) as PushButton;
* pb_shet_new.LargeImage = new BitmapImage(new Uri(iconFullPath("SHET_NEW_96.png")));
*
* //SHET_Size_SerialNo button
* PushButton pb_shet_size_serialNo = rp_shet.AddItem(new PushButtonData("SHET_Size_SerialNo", "图序图幅", projectAssemblyFullPath("SHET_Size_SerialNo.dll"), "SHET_Size_SerialNo.CMD")) as PushButton;
* //pb_shet_size_serialNo.LargeImage = new BitmapImage(new Uri(iconFullPath("SHET_Size_SerialNo_96.png")));
*
* //Excel panel
* RibbonPanel rp_excel = application.CreateRibbonPanel("goa tools 制图", "Excel");
* PushButtonData pbd_excel_fast_paste = new PushButtonData("Excel_Fast_Paste", "粘贴", projectAssemblyFullPath("Excel_Fast_Paste.dll"), "Excel_Fast_Paste.FastPaste");
* PushButtonData pbd_excel_fast_reload = new PushButtonData("Excel_Fast_Reload", "重载", projectAssemblyFullPath("Excel_Fast_Paste.dll"), "Excel_Fast_Paste.FastReload");
* rp_excel.AddStackedItems(
* pbd_excel_fast_paste,
* pbd_excel_fast_reload);
#endregion drafting tab
*
#region module tab
*
#region 基本操作
* //BASIC OPERTATION panel
* RibbonPanel rp_group_basic = application.CreateRibbonPanel("goa tools 模块", "基本操作");
*
* //GROUP_CREATE
* PushButton pb_group_create = rp_group_basic.AddItem(new PushButtonData("MODULE_CREATE", "新建(GN)", projectAssemblyFullPath("Module.dll"), "Module.CreateCMD")) as PushButton;
* pb_group_create.LargeImage = new BitmapImage(new Uri(iconFullPath("GROUP_CREATE_96.png")));
* //GROUP_SELECT
* PushButton pb_group_select = rp_group_basic.AddItem(new PushButtonData("MODULE_SELECT", "选择(GS)", projectAssemblyFullPath("Module.dll"), "Module.CMD")) as PushButton;
* pb_group_select.LargeImage = new BitmapImage(new Uri(iconFullPath("GROUP_SELECT_96.png")));
* //GROUP_ISOLATE
* //PushButton pb_group_isolate = rp_group_basic.AddItem(new PushButtonData("MODULE_ISOLATE", "隔离选中模块", projectAssemblyFullPath("Module.dll"), "Module.Isolate_CMD")) as PushButton;
* //pb_group_isolate.LargeImage = new BitmapImage(new Uri(iconFullPath("GROUP_ISOLATE_96.png")));
* //GROUP_DELETEMODULE
* PushButton pb_module_delete = rp_group_basic.AddItem(new PushButtonData("MODULE_DELETE", "删除(GA)", projectAssemblyFullPath("Module.dll"), "Module.DeleteModule_CMD")) as PushButton;
* pb_module_delete.LargeImage = new BitmapImage(new Uri(iconFullPath("GROUP_DELETE_MODULE_96.png")));
*
* //GROUP_UNGROUP
* PushButton pb_group_explode = rp_group_basic.AddItem(new PushButtonData("MODULE_EXPLODE", "炸开(GX)", projectAssemblyFullPath("Module.dll"), "Module.Explode_CMD")) as PushButton;
* pb_group_explode.LargeImage = new BitmapImage(new Uri(iconFullPath("GROUP_EXPLODE_96.png")));
*
* //rename module
* //PushButton pb_group_rename = rp_group_basic.AddItem(new PushButtonData("MODULE_RENAME", "由当前创建新类型", projectAssemblyFullPath("Module.dll"), "Module.Rename_CMD")) as PushButton;
* //pb_group_rename.LargeImage = new BitmapImage(new Uri(iconFullPath("GROUP_RENAME_96.jpg")));
* //GROUP_MODIFY
*
* var pb_group_manage = new PushButtonData("MODULE_MANAGE", "模块管理", projectAssemblyFullPath("Module.dll"), "Module.Manage_CMD");
* var pb_group_isolate = new PushButtonData("MODULE_ISOLATE", "隔离模块", projectAssemblyFullPath("Module.dll"), "Module.Isolate_CMD");
* rp_group_basic.AddStackedItems(
* pb_group_manage,
* pb_group_isolate);
#endregion
*
#region 模块编辑
* //GROUP EDIT panel
* RibbonPanel rp_group_edit = application.CreateRibbonPanel("goa tools 模块", "模块编辑");
*
* //GROUP_MODIFY
* PushButton pb_group_modify = rp_group_edit.AddItem(new PushButtonData("MODULE_MODIFY", "编辑模块", projectAssemblyFullPath("Module.dll"), "Module.Edit_CMD")) as PushButton;
* pb_group_modify.LargeImage = new BitmapImage(new Uri(iconFullPath("GROUP_MODIFY_96.png")));
*
* var pb_module_rename = new PushButtonData("MODULE_RENAME", "由当前创建新类型", projectAssemblyFullPath("Module.dll"), "Module.Rename_CMD");
* var pbd_module_changeType = new PushButtonData("MODULE_CHANGE_TYPE", "改变模块类型", projectAssemblyFullPath("Module.dll"), "Module.ChangeType_CMD");
* rp_group_edit.AddStackedItems(
* pb_module_rename,
* pbd_module_changeType);
*
* var pbd_module_oneClickSync = new PushButtonData("MODULE_ONECLICK_SYNC", "一键同步", projectAssemblyFullPath("Module.dll"), "Module.OneClickSync_CMD");
* var pbd_module_forceSync = new PushButtonData("MODULE_FORCE_SYNC", "强制同步", projectAssemblyFullPath("Module.dll"), "Module.ForceSync_CMD");
*
* rp_group_edit.AddStackedItems(
* pbd_module_oneClickSync,
* pbd_module_forceSync);
*
#endregion
*
#region 模块操作
* //GROUP OPERATION panel
* RibbonPanel rp_group_operate = application.CreateRibbonPanel("goa tools 模块", "模块操作");
* //GROUP_MIRROR
* PushButton pb_group_mirror_draw = rp_group_operate.AddItem(new PushButtonData("MODULE_MIRROR_DRAW", "画线镜像", projectAssemblyFullPath("Module.dll"), "Module.MirrorDraw_CMD")) as PushButton;
* pb_group_mirror_draw.LargeImage = new BitmapImage(new Uri(iconFullPath("GROUP_MIRROR_DRAWN_96.png")));
* //GROUP_MIRROR_PICK
* PushButton pb_group_mirror_pick = rp_group_operate.AddItem(new PushButtonData("MODULE_MIRROR_PICK", "拾取镜像", projectAssemblyFullPath("Module.dll"), "Module.MirrorPick_CMD")) as PushButton;
* pb_group_mirror_pick.LargeImage = new BitmapImage(new Uri(iconFullPath("GROUP_MIRROR_PICK_96.png")));
*
* //GROUP_COPY_TOLEVEL
* PushButton pb_group_copyToLevel = rp_group_operate.AddItem(new PushButtonData("MODULE_COPY_TOLEVEL", "复制到标高", projectAssemblyFullPath("Module.dll"), "Module.Lv_CMD")) as PushButton;
* pb_group_copyToLevel.LargeImage = new BitmapImage(new Uri(iconFullPath("GROUP_COPY_TOLEVEL_96.png")));
*
* PushButton pb_module_copyPaste = rp_group_operate.AddItem(new PushButtonData("MODULE_COPY_PASTE", "其他复制", projectAssemblyFullPath("Module.dll"), "Module.CopyPaste_CMD")) as PushButton;
* pb_module_copyPaste.LargeImage = new BitmapImage(new Uri(iconFullPath("GROUP_COPY_SAMELEVEL_96.png")));
*
* //不常用(复制、移动、旋转)
* //stacked items
* var pbd_module_copySameLevel = new PushButtonData("MODULE_COPY_SAMELEVEL", "同层复制", projectAssemblyFullPath("Module.dll"), "Module.Copy_CMD");
* var pbd_module_move = new PushButtonData("MODULE_MOVE", "移动模块", projectAssemblyFullPath("Module.dll"), "Module.Move_CMD");
* var pbd_module_rotate = new PushButtonData("MODULE_ROTATE", "旋转模块", projectAssemblyFullPath("Module.dll"), "Module.Rotate_CMD");
* rp_group_operate.AddStackedItems(
* pbd_module_copySameLevel,
* pbd_module_move,
* pbd_module_rotate);
*
#endregion
*
#region 跨模型操作
* //doc panel
* RibbonPanel rp_module_doc = application.CreateRibbonPanel("goa tools 模块", "跨模型工具");
*
*
* PushButton pbd_module_syncDoc = rp_module_doc.AddItem(new PushButtonData("MODULE_DOC_SYNC", "跨模型同步", projectAssemblyFullPath("Module.dll"), "Module.DocSync_CMD")) as PushButton;
* pbd_module_syncDoc.LargeImage = new BitmapImage(new Uri(iconFullPath("GROUP_SYNC_DOC_96.png")));
#endregion
*
#region 附加操作
* //attach operation panel
* RibbonPanel rp_group_attach = application.CreateRibbonPanel("goa tools 模块", "附加操作");
*
* var pb_module_convert = new PushButtonData("CONVERT_ALL", "全部组转模块", projectAssemblyFullPath("Module.dll"), "Module.Convert_CMD");
* var pb_module_pickConvert = new PushButtonData("CONVERT_PICK", "点选组转模块", projectAssemblyFullPath("Module.dll"), "Module.PickConvert_CMD");
* rp_group_attach.AddStackedItems(
* pb_module_convert,
* pb_module_pickConvert);
*
* //stacked items
* var pbd_module_deleteMark = new PushButtonData("MODULE_DELETE_MARK", "清除图元标记", projectAssemblyFullPath("Module.dll"), "Module.DeleteMarkOnElems");
* var pbd_module_offset = new PushButtonData("MODULE_OFFSET", "垂直移动", projectAssemblyFullPath("Module.dll"), "Module.Offset_CMD");
*
* rp_group_attach.AddStackedItems(
* pbd_module_deleteMark,
* pbd_module_offset);
#endregion
*
#region 选择工具
* //select panel
* RibbonPanel rp_group_select = application.CreateRibbonPanel("goa tools 模块", "选择工具");
* //stacked items group 1
* var pbd_sel_module_all = new PushButtonData("SEL_ALL_MODULE", "选中同类型模块", projectAssemblyFullPath("Module.dll"), "Module.selectAllSameTypeModule");
* var pbd_sel_module_sameLevel = new PushButtonData("SEL_LEVEL_MODULE", "选中同层模块", projectAssemblyFullPath("Module.dll"), "Module.selectSameLvModule");
* var pbd_sel_module_pick = new PushButtonData("SEL_PICK_MODULE", "选中当前模块", projectAssemblyFullPath("Module.dll"), "Module.selectModuleByPick");
* var pbd_sel_module_shift = new PushButtonData("SEL_SHIFT_MODULE", "减选模块", projectAssemblyFullPath("Module.dll"), "Module.shiftSelect");
*
* rp_group_select.AddStackedItems(
* pbd_sel_module_sameLevel,
* pbd_sel_module_pick);
* rp_group_select.AddStackedItems(
* pbd_sel_module_all,
* pbd_sel_module_shift);
#endregion
*
* //其他同步方法
* RibbonPanel rp_group_sync = application.CreateRibbonPanel("goa tools 模块", "修复工具");
* PushButtonData pbd_module_resetView = new PushButtonData("MODULE_RESETVIEW", "重置视图", projectAssemblyFullPath("Module.dll"), "Module.ResetStorageFiLocation");
* var pbd_module_color = new PushButtonData("DEL_COLOR_OVERRIDE", "颜色复原", projectAssemblyFullPath("Module.dll"), "Module.CleanOverrideColor");
* var pbd_module_window = new PushButtonData("MODULE_CLOSEWINDOW", "关闭窗口", projectAssemblyFullPath("Module.dll"), "Module.CloseWindow");
*
* rp_group_sync.AddStackedItems(
* pbd_module_resetView,
* pbd_module_color,
* pbd_module_window);
*
* RibbonPanel rp_group_developer = application.CreateRibbonPanel("goa tools 模块", "开发工具");
* PushButtonData pbd_module_developer = new PushButtonData("MODULE_DEVELOPER", "读取模块信息", projectAssemblyFullPath("Module.dll"), "Module.DeveloperTool");
* PushButtonData pbd_debug_showBoundingBox = new PushButtonData("debug_showBoundingBox", "显示范围框", projectAssemblyFullPath("goa.Common.dll"), "goa.Common.CMD_debug_showBoundingBox");
* rp_group_developer.AddStackedItems
* (pbd_module_developer,
* pbd_debug_showBoundingBox);
#endregion module tab
*/
return(Result.Succeeded);
}
/// <summary>
/// Radio/toggle button for "Command Data", "DB Element" and "Element Filtering"
/// </summary>
public void AddRadioButton(RibbonPanel panel)
{
// Create three toggle buttons for radio button group
// #1
ToggleButtonData toggleButtonData1 = new ToggleButtonData("RadioCommandData", "Command" + "\n Data", _introLabPath, _introLabName + ".CommandData");
toggleButtonData1.LargeImage = NewBitmapImage("Basics.ico");
// #2
ToggleButtonData toggleButtonData2 = new ToggleButtonData("RadioDbElement", "DB" + "\n Element", _introLabPath, _introLabName + ".DBElement");
toggleButtonData2.LargeImage = NewBitmapImage("Basics.ico");
// #3
ToggleButtonData toggleButtonData3 = new ToggleButtonData("RadioElementFiltering", "Filtering", _introLabPath, _introLabName + ".ElementFiltering");
toggleButtonData3.LargeImage = NewBitmapImage("Basics.ico");
// Make a radio button group now
RadioButtonGroupData radioBtnGroupData = new RadioButtonGroupData("RadioButton");
RadioButtonGroup radioBtnGroup = panel.AddItem(radioBtnGroupData) as RadioButtonGroup;
radioBtnGroup.AddItem(toggleButtonData1);
radioBtnGroup.AddItem(toggleButtonData2);
radioBtnGroup.AddItem(toggleButtonData3);
}
/// <summary>
/// This method will be executed when Autodesk Revit
/// will be started.
///
/// WARNING
/// Don't use the RevitDevTools.dll features directly
/// in this method. You are to call other methods which
/// do it instead of.
/// </summary>
/// <param name="uic_app">A handle to the application
/// being started.</param>
/// <returns>Indicates if the external application
/// completes its work successfully.</returns>
Result IExternalApplication.OnStartup(
UIControlledApplication uic_app)
{
Result result = Result.Succeeded;
string tabName = "Filter Lab";
string panelName = "Filter Tools";
string panelName2 = "Settings";
string buttonfiltername = "Selection Filter";
string buttonfilternametype = "Selection" + Environment.NewLine + "Filter";
string buttonfilternamehelp = "This tool is used to Filter selected elements.";
string buttonfiltername2 = "Pre-Selection Filter";
string buttonfiltername2type = "Pre-Selection" + Environment.NewLine + "Filter";
string buttonfilternamehelp2 = "This tool is used to Filter elements before selecting.";
string button2Name = "Sheets";
string button3Name = "Strand";
string buttonsplitName = "Extra Tools";
try
{
List <RibbonPanel> panels = uic_app.GetRibbonPanels(
tabName);
}
catch
{
uic_app.CreateRibbonTab(tabName);
}
RibbonPanel panelViewExport = uic_app.CreateRibbonPanel(
tabName, panelName);
panelViewExport.Name = panelName;
panelViewExport.Title = panelName;
PushButtonData buttonfilter = new PushButtonData(
buttonfiltername, buttonfilternametype,
Assembly.GetExecutingAssembly().Location,
typeof(SelectedCommand).FullName);
buttonfilter.ToolTip = buttonfilternamehelp;
ImageSource iconfilter = GetIconSource(Resources.Button_image_17);
buttonfilter.LargeImage = iconfilter;
buttonfilter.Image = Thumbnail(iconfilter);
panelViewExport.AddItem(buttonfilter);
panelViewExport.AddSeparator();
PushButtonData buttonfilter2 = new PushButtonData(
buttonfiltername2, buttonfiltername2type,
Assembly.GetExecutingAssembly().Location,
typeof(PreSelectionCommand).FullName);
buttonfilter2.ToolTip = buttonfilternamehelp2;
ImageSource iconfilter2 = GetIconSource(Resources.Button_image_24);
buttonfilter2.LargeImage = iconfilter2;
buttonfilter2.Image = Thumbnail(iconfilter2);
panelViewExport.AddItem(buttonfilter2);
panelViewExport.AddSeparator();
PushButtonData button2 = new PushButtonData(
button2Name, button2Name,
Assembly.GetExecutingAssembly().Location,
typeof(FilterCommand).FullName);
button2.ToolTip = button2Name;
ImageSource icon2 = GetIconSource(Resources.Button_image_20);
button2.LargeImage = icon2;
button2.Image = Thumbnail(icon2);
PushButtonData button3 = new PushButtonData(
button3Name, button3Name,
Assembly.GetExecutingAssembly().Location,
typeof(FilterCommand).FullName);
button3.ToolTip = button3Name;
ImageSource icon3 = GetIconSource(Resources.Button_image_18);
button3.LargeImage = icon3;
button3.Image = Thumbnail(icon3);
SplitButtonData sb1 = new SplitButtonData(buttonsplitName, buttonsplitName);
SplitButton sb = panelViewExport.AddItem(sb1) as SplitButton;
sb.AddPushButton(button2);
sb.AddPushButton(button3);
RibbonPanel panelViewExport2 = uic_app.CreateRibbonPanel(
tabName, panelName2);
panelViewExport2.Name = panelName2;
panelViewExport2.Title = panelName2;
PushButtonData buttonsettings = new PushButtonData(
"Settings", "Settings",
Assembly.GetExecutingAssembly().Location,
typeof(SettingsCommand).FullName);
buttonsettings.ToolTip = "To change settings for Filters.";
ImageSource iconsettings = GetIconSource(Resources.Button_image_13);
buttonsettings.LargeImage = iconsettings;
buttonsettings.Image = Thumbnail(iconsettings);
panelViewExport2.AddItem(buttonsettings);
panelViewExport2.AddSeparator();
PushButtonData buttonweb = new PushButtonData(
"Web Help", "Web Help",
Assembly.GetExecutingAssembly().Location,
typeof(WebHelp).FullName);
buttonweb.ToolTip = "Why not Google It!!!!";
ImageSource iconweb = GetIconSource(Resources.Button_image_21);
buttonweb.LargeImage = iconweb;
buttonweb.Image = Thumbnail(iconweb);
panelViewExport2.AddItem(buttonweb);
panelViewExport2.AddSeparator();
PushButtonData buttonabout = new PushButtonData(
"About", "About",
Assembly.GetExecutingAssembly().Location,
typeof(AboutCommand).FullName);
buttonabout.ToolTip = "Learn About Filter Labs";
ImageSource iconabout = GetIconSource(Resources.Button_image_23);
buttonabout.LargeImage = iconabout;
buttonabout.Image = Thumbnail(iconabout);
panelViewExport2.AddItem(buttonabout);
return(result);
}
/// <summary>
/// Combo box - 5 items in 2 groups.
/// Combo box is used in conjunction with event. We'll come back later.
/// For now, just demonstrates how to make a combo box.
/// </summary>
public void AddComboBox(RibbonPanel panel)
{
// Create five combo box members with two groups
// #1
ComboBoxMemberData comboBoxMemberData1 = new ComboBoxMemberData("ComboCommandData", "Command Data");
comboBoxMemberData1.Image = NewBitmapImage("Basics.ico");
comboBoxMemberData1.GroupName = "DB Basics";
// #2
ComboBoxMemberData comboBoxMemberData2 = new ComboBoxMemberData("ComboDbElement", "DB Element");
comboBoxMemberData2.Image = NewBitmapImage("Basics.ico");
comboBoxMemberData2.GroupName = "DB Basics";
// #3
ComboBoxMemberData comboBoxMemberData3 = new ComboBoxMemberData("ComboElementFiltering", "Filtering");
comboBoxMemberData3.Image = NewBitmapImage("Basics.ico");
comboBoxMemberData3.GroupName = "DB Basics";
// #4
ComboBoxMemberData comboBoxMemberData4 = new ComboBoxMemberData("ComboElementModification", "Modify");
comboBoxMemberData4.Image = NewBitmapImage("Basics.ico");
comboBoxMemberData4.GroupName = "Modeling";
// #5
ComboBoxMemberData comboBoxMemberData5 = new ComboBoxMemberData("ComboModelCreation", "Create");
comboBoxMemberData5.Image = NewBitmapImage("Basics.ico");
comboBoxMemberData5.GroupName = "Modeling";
// Make a combo box now
ComboBoxData comboBxData = new ComboBoxData("ComboBox");
ComboBox comboBx = panel.AddItem(comboBxData) as ComboBox;
comboBx.ToolTip = "Select an Option";
comboBx.LongDescription = "select a command you want to run";
comboBx.AddItem(comboBoxMemberData1);
comboBx.AddItem(comboBoxMemberData2);
comboBx.AddItem(comboBoxMemberData3);
comboBx.AddItem(comboBoxMemberData4);
comboBx.AddItem(comboBoxMemberData5);
comboBx.CurrentChanged += new EventHandler<Autodesk.Revit.UI.Events.ComboBoxCurrentChangedEventArgs>(comboBx_CurrentChanged);
}
public Result OnStartup(UIControlledApplication application)
{
// Create a custom ribbon tab
string tabName = "CRM Tools";
application.CreateRibbonTab(tabName);
string REVIT_VERSION = "v2020";
string commandsPath = "";
commandsPath = @"C:\Users\" + Environment.UserName + @"\Documents\CRMRevitTools\" + REVIT_VERSION + @"\Commands\";
string iconsPath = "";
iconsPath = @"C:\Users\" + Environment.UserName + @"\Documents\CRMRevitTools\" + REVIT_VERSION + @"\RevitIcons\";
#region CreateRevitSheets
// Create a push button
PushButtonData btnCreateRevitSheets = new PushButtonData("cmdCreateRevitSheets", " Create \nSheets", commandsPath + "CreateRevitSheets.dll", "CreateRevitSheets.Class1");
btnCreateRevitSheets.ToolTip = "Create multiple Sheets at once. Assign Views to Sheets.";
btnCreateRevitSheets.LongDescription = "Manually create Sheets or load them from a (.csv) file. " +
"CSV files can be created with Microsoft Excel. The Sheet Number must be in Column A and the Sheet Name must be in Column B. Each Sheet should have its own Row. " +
"Sheet 1 in Row 1, Sheet 2 in Row 2, etc.";
// create bitmap image for button
Uri uriLargeImage_CreateRevitSheets = new Uri(iconsPath + @"32x32\cmdRevitSheetsImage_32x32.bmp");
BitmapImage largeImage_CreateRevitSheets = new BitmapImage(uriLargeImage_CreateRevitSheets);
// create bitmap image for button
Uri uriSmallImage_CreateRevitSheets = new Uri(iconsPath + @"16x16\cmdRevitSheetsImage_16x16.bmp");
BitmapImage smallImage_CreateRevitSheets = new BitmapImage(uriSmallImage_CreateRevitSheets);
btnCreateRevitSheets.LargeImage = largeImage_CreateRevitSheets;
btnCreateRevitSheets.Image = smallImage_CreateRevitSheets;
#endregion
#region SharedParameterCreator
// Create a push button
PushButtonData btnSharedParameterCreator = new PushButtonData("cmdSharedParameterCreator", "Shared \nParameter Creator", commandsPath + "SharedParameterCreator.dll", "SharedParameterCreator.Class1");
btnSharedParameterCreator.ToolTip = "Create a Shared Parameter file from a CSV (Comma delimited) (.csv) file list";
btnSharedParameterCreator.LongDescription = "Create large numbers of Shared Parameters. To use this program, first a file with the .csv extension must be created, which can be stored anywhere. " +
"CSV files can be created with Microsoft Excel.\n\n" +
"Column A: Category (e.g. Mechanical Equipment)\n" +
"Column B: Shared Parameter Group (User Determined)\n" +
"Column C: Data Type (e.g. Number, Integer, Text, YesNo)\n" +
"Column D: Binding Type (e.g. Instance, Type)\n" +
"Column E: Parameter Name (User Determined)\n\n" +
"Parameters are grouped under Data in Properties if Insert into Project Parameters is selected";
// create bitmap image for button
Uri uriLargeImage_SharedParameterCreator = new Uri(iconsPath + @"32x32\cmdSharedParameterCreator_32x32.bmp");
BitmapImage largeImage_SharedParameterCreator = new BitmapImage(uriLargeImage_SharedParameterCreator);
// create bitmap image for button
Uri uriSmallImage_SharedParameterCreator = new Uri(iconsPath + @"16x16\cmdSharedParameterCreator_16x16.bmp");
BitmapImage smallImage_SharedParameterCreator = new BitmapImage(uriSmallImage_SharedParameterCreator);
btnSharedParameterCreator.LargeImage = largeImage_SharedParameterCreator;
btnSharedParameterCreator.Image = smallImage_SharedParameterCreator;
#endregion
#region CreateSheetSet
// Create a push button
PushButtonData btnCreateSheetSet = new PushButtonData("cmdCreateSheetSet", "Create \nSheet Set", commandsPath + "CreateSheetSet.dll", "CreateSheetSet.Class1");
btnCreateSheetSet.ToolTip = "Create a Sheet Set based on revision properties";
btnCreateSheetSet.LongDescription = "Select between Revision Description, Revision Number, and Revision Date to create a Sheet Set containing all the drawings associated with that property";
// create bitmap image for button
Uri uriLargeImage_CreateSheetSet = new Uri(iconsPath + @"32x32\cmdCreateSheetSet_32x32.bmp");
BitmapImage largeImage_CreateSheetSet = new BitmapImage(uriLargeImage_CreateSheetSet);
// create bitmap image for button
Uri uriSmallImage_CreateSheetSet = new Uri(iconsPath + @"16x16\cmdCreateSheetSet_16x16.bmp");
BitmapImage smallImage_CreateSheetSet = new BitmapImage(uriSmallImage_CreateSheetSet);
btnCreateSheetSet.LargeImage = largeImage_CreateSheetSet;
btnCreateSheetSet.Image = smallImage_CreateSheetSet;
#endregion
#region SheetRenamer
PushButtonData btnSheetRenamer = new PushButtonData("cmdSheetRenamer", "Sheet \nRenamer", commandsPath + "SheetRenamer.dll", "SheetRenamer.Class1");
btnSheetRenamer.ToolTip = "Renames all PDF files in a directory to the following naming convention: Project Number-Sheet Number_Current Revision";
btnSheetRenamer.LongDescription = "Create a sheet set within Revit and assign the sheets you want to print. Once the sheets are printed, browse to the directory where they are saved. " +
"Select the sheet set that you used to print and click OK.\n\n" +
"NOTE: Ensure that the Project Number is set within Project Information for proper file naming.";
// create bitmap image for button
Uri uriLargeImage_SheetRenamer = new Uri(iconsPath + @"32x32\cmdSheetRenamer_32x32.bmp");
BitmapImage largeImage_SheetRenamer = new BitmapImage(uriLargeImage_SheetRenamer);
// create bitmap image for button
Uri uriSmallImage_SheetRenamer = new Uri(iconsPath + @"16x16\cmdSheetRenamer_16x16.bmp");
BitmapImage smallImage_SheetRenamer = new BitmapImage(uriSmallImage_SheetRenamer);
btnSheetRenamer.LargeImage = largeImage_SheetRenamer;
btnSheetRenamer.Image = smallImage_SheetRenamer;
#endregion
#region InsertParameters
PushButtonData btnInsertParameters = new PushButtonData("cmdInsertParameters", "Insert \nParameters", commandsPath + "InsertParameters.dll", "InsertParameters.Class1");
btnInsertParameters.ToolTip = "Insert Shared Parameters into Project Parameters or Family Parameters";
btnInsertParameters.LongDescription = "1) Make sure a Shared Parameter file is loaded in Manage->Shared Parameters\n" +
"2) Click Load to fill the view with the Shared Parameters from the file\n" +
"3) Right click to set the Binding type (e.g. Instance or Type). This value must be set before selecting a Category.\n" +
"4) Right click to set the element Category (e.g. Mechanical Equipment, Walls, etc.)\n" +
"5) Right click to set the Properties Group. This is the category it will be grouped under in the Properties window.\n" +
"6) Click Insert to insert the Shared Parameters into Project Parameters or Family Parameters";
// create bitmap image for button
Uri uriLargeImage_InsertParameters = new Uri(iconsPath + @"32x32\cmdInsertParameters_32x32.bmp");
BitmapImage largeImage_InsertParameters = new BitmapImage(uriLargeImage_InsertParameters);
// create bitmap image for button
Uri uriSmallImage_InsertParameters = new Uri(iconsPath + @"16x16\cmdInsertParameters_16x16.bmp");
BitmapImage smallImage_InsertParameters = new BitmapImage(uriSmallImage_InsertParameters);
btnInsertParameters.LargeImage = largeImage_InsertParameters;
btnInsertParameters.Image = smallImage_InsertParameters;
#endregion
#region RevisionOnSheets
// Create a push button
PushButtonData btnRevisionOnSheets = new PushButtonData("cmdRevisionOnSheets", "Revision \nOn Sheets", commandsPath + "RevisionOnSheets.dll", "RevisionOnSheets.Class1");
btnRevisionOnSheets.ToolTip = "Apply or unapply a revision to multiple sheets at once";
btnRevisionOnSheets.LongDescription = "Select the revision sequence from the drop-down list that you want to apply or unapply from the list of sheets in the project";
// create bitmap image for button
Uri uriLargeImage_RevisionOnSheets = new Uri(iconsPath + @"32x32\cmdRevisionOnSheets_32x32.bmp");
BitmapImage largeImage_RevisionOnSheets = new BitmapImage(uriLargeImage_RevisionOnSheets);
// create bitmap image for button
Uri uriSmallImage_RevisionOnSheets = new Uri(iconsPath + @"16x16\cmdRevisionOnSheets_16x16.bmp");
BitmapImage smallImage_RevisionOnSheets = new BitmapImage(uriSmallImage_RevisionOnSheets);
btnRevisionOnSheets.LargeImage = largeImage_RevisionOnSheets;
btnRevisionOnSheets.Image = smallImage_RevisionOnSheets;
#endregion
#region PurgeParameters
// Create a push button
PushButtonData btnPurgeParameters = new PushButtonData("cmdPurgeParameters", "Purge \nParameters", commandsPath + "PurgeParameters.dll", "PurgeParameters.Class1");
btnPurgeParameters.ToolTip = "Completely delete Shared Parameters from the active Revit Document.";
btnPurgeParameters.LongDescription = "Select the BuiltInCategory from the dropdown list to load it's associated " +
"Shared Parameters. Tick the checkbox next to the Shared Parameters that you " +
"want to purge. NOTE: At least one family of the selected BuiltInCategory must " +
"be loaded into the project to load it's associated parameters.\n\n" +
"Purging a Shared Parameter will physically remove it from the Revit Project, " +
"Tags, Schedules, and Families. To use this parameter again it will need to be " +
"re-inserted in the Project and any Tags, Schedules, and Families.";
// create bitmap image for button
Uri uriLargeImage_PurgeParameters = new Uri(iconsPath + @"32x32\cmdPurgeParameters_32x32.bmp");
BitmapImage largeImage_PurgeParameters = new BitmapImage(uriLargeImage_PurgeParameters);
// create bitmap image for button
Uri uriSmallImage_PurgeParameters = new Uri(iconsPath + @"16x16\cmdPurgeParameters_16x16.bmp");
BitmapImage smallImage_PurgeParameters = new BitmapImage(uriSmallImage_PurgeParameters);
btnPurgeParameters.LargeImage = largeImage_PurgeParameters;
btnPurgeParameters.Image = smallImage_PurgeParameters;
#endregion
#region About
// Create a push button
PushButtonData btnAbout = new PushButtonData("cmdAbout", "About \nCRM Tools", commandsPath + "About.dll", "About.Class1");
btnAbout.ToolTip = "Release information";
// create bitmap image for button
Uri uriLargeImage_About = new Uri(iconsPath + @"32x32\cmdAbout_32x32.bmp");
BitmapImage largeImage_About = new BitmapImage(uriLargeImage_About);
// create bitmap image for button
Uri uriSmallImage_About = new Uri(iconsPath + @"16x16\cmdAbout_16x16.bmp");
BitmapImage smallImage_About = new BitmapImage(uriSmallImage_About);
btnAbout.LargeImage = largeImage_About;
btnAbout.Image = smallImage_About;
#endregion
#region ProductionPanelItems
// Create a ribbon panel
RibbonPanel pnlProductionPanel = application.CreateRibbonPanel(tabName, "Production");
// Add the buttons to the panel
List <RibbonItem> productionButtons = new List <RibbonItem>();
// Add the buttons to the panel
productionButtons.Add(pnlProductionPanel.AddItem(btnCreateRevitSheets));
productionButtons.Add(pnlProductionPanel.AddItem(btnRevisionOnSheets));
productionButtons.Add(pnlProductionPanel.AddItem(btnCreateSheetSet));
productionButtons.Add(pnlProductionPanel.AddItem(btnSheetRenamer));
#endregion
#region ManangePanelItems
// Create a ribbon panel
RibbonPanel pnlManagePanel = application.CreateRibbonPanel(tabName, "Manage");
// Add the buttons to the panel
List <RibbonItem> manageButtons = new List <RibbonItem>();
// Add the buttons to the panel
manageButtons.Add(pnlManagePanel.AddItem(btnSharedParameterCreator));
manageButtons.Add(pnlManagePanel.AddItem(btnInsertParameters));
manageButtons.Add(pnlManagePanel.AddItem(btnPurgeParameters));
#endregion
#region About
// Create a ribbon panel
RibbonPanel pnlInfo = application.CreateRibbonPanel(tabName, "Info");
// Add the buttons to the panel
List <RibbonItem> aboutButton = new List <RibbonItem>();
aboutButton.Add(pnlInfo.AddItem(btnAbout));
#endregion
return(Result.Succeeded);
}
/// <summary>
/// Stacked Buttons - combination of: push button, dropdown button, combo box and text box.
/// (no radio button group, split buttons).
/// Here we define 6 buttons, make grouping of 1, 3, 2 items, and stack them in three layer:
/// (1) simple push button with "Hello World"
/// (2) pull down with 3 items: "Command Data", "DB Element" and "Element Filtering".
/// (3) pull down with 2 items: "Element Modification" and "Model Creation"
/// </summary>
public void AddStackedButtons_Complex(RibbonPanel panel)
{
// Create six push buttons to group for pull down and stack up
// #0
PushButtonData pushButtonData0 = new PushButtonData("StackComplexHelloWorld", "Hello World", _introLabPath, _introLabName + ".HelloWorld");
pushButtonData0.Image = NewBitmapImage("Basics.ico");
// #1
PushButtonData pushButtonData1 = new PushButtonData("StackComplexCommandData", "Command Data", _introLabPath, _introLabName + ".CommandData");
pushButtonData1.Image = NewBitmapImage("Basics.ico");
// #2
PushButtonData pushButtonData2 = new PushButtonData("StackComplexDbElement", "DB Element", _introLabPath, _introLabName + ".DBElement");
// #3
PushButtonData pushButtonData3 = new PushButtonData("StackComplexElementFiltering", "Filtering", _introLabPath, _introLabName + ".ElementFiltering");
// #4
PushButtonData pushButtonData4 = new PushButtonData("StackComplexElementModification", "Modify", _introLabPath, _introLabName + ".ElementModification");
// #5
PushButtonData pushButtonData5 = new PushButtonData("StackComplexModelCreation", "Create", _introLabPath, _introLabName + ".ModelCreation");
// Make two sets of pull down
PulldownButtonData pulldownBtnData1 = new PulldownButtonData("StackComplePulldownButton1", "DB Basics");
PulldownButtonData pulldownBtnData2 = new PulldownButtonData("StackComplePulldownButton2", "Modeling");
// Create three item stack.
IList<RibbonItem> stackedItems = panel.AddStackedItems(pushButtonData0, pulldownBtnData1, pulldownBtnData2);
PulldownButton pulldownBtn2 = stackedItems[1] as PulldownButton;
PulldownButton pulldownBtn3 = stackedItems[2] as PulldownButton;
pulldownBtn2.Image = NewBitmapImage("Basics.ico");
pulldownBtn3.Image = NewBitmapImage("House.ico");
// Add each sub items
PushButton button1 = pulldownBtn2.AddPushButton(pushButtonData1);
PushButton button2 = pulldownBtn2.AddPushButton(pushButtonData2);
PushButton button3 = pulldownBtn2.AddPushButton(pushButtonData3);
PushButton button4 = pulldownBtn3.AddPushButton(pushButtonData4);
PushButton button5 = pulldownBtn3.AddPushButton(pushButtonData5);
// Note: we need to set the image later. if we do in button data, it won't show in the Ribbon.
button1.Image = NewBitmapImage("Basics.ico");
button2.Image = NewBitmapImage("Basics.ico");
button3.Image = NewBitmapImage("Basics.ico");
button4.Image = NewBitmapImage("Basics.ico");
button5.Image = NewBitmapImage("Basics.ico");
}
// define a method that will create our tab and button
public static void AddRibbonPanel(UIControlledApplication application)
{
RevitSelectionChangedEvent evtSelection = new RevitSelectionChangedEvent();
_SelectionChangedEvent = ExternalEvent.Create(evtSelection);
RevitPeriodicEvent evtPeriodic = new RevitPeriodicEvent();
_PeriodicEvent = ExternalEvent.Create(evtPeriodic);
RevitWindowsEvent evtWindowPeriodic = new RevitWindowsEvent();
_WindowsEvent = ExternalEvent.Create(evtWindowPeriodic);
// Create a custom ribbon tab
String tabName = "SmartBuilding";
application.CreateRibbonTab(tabName);
// Get dll assembly path
string thisAssemblyPath = Assembly.GetExecutingAssembly().Location;
string thisAssemblyDir = System.IO.Directory.GetParent(thisAssemblyPath).FullName;
RibbonPanel ribbonPanel = application.CreateRibbonPanel(tabName, "Connection");
PushButtonData bData = new PushButtonData(
"Connection",
"Connection",
thisAssemblyPath,
"RevitTestControl.Connection.Connection");
bData.AvailabilityClassName = "RevitTestControl.AppsAvailability";
PushButton Button = ribbonPanel.AddItem(bData) as PushButton;
Button.ToolTip = "Connect to SmartBuilding";
BitmapImage pbImage = new BitmapImage(new Uri(thisAssemblyDir + "/Resources/Connect.ico"));
Button.LargeImage = pbImage;
Button.AvailabilityClassName = "RevitTestControl.AppsAvailability";
//Add a new Ribbon Panel for Ligh control
ribbonPanel = application.CreateRibbonPanel(tabName, "Light Control");
bData = new PushButtonData(
"SwitchOn",
"Switch On",
thisAssemblyPath,
"RevitTestControl.LightControl.SwitchOn");
bData.AvailabilityClassName = "RevitTestControl.AppsAvailability";
Button = ribbonPanel.AddItem(bData) as PushButton;
Button.ToolTip = "Switch On 100% selected element";
pbImage = new BitmapImage(new Uri(thisAssemblyDir + "/Resources/LightOn.ico"));
Button.LargeImage = pbImage;
bData = new PushButtonData(
"SwitchOff",
"Switch Off",
thisAssemblyPath,
"RevitTestControl.LightControl.SwitchOff");
bData.AvailabilityClassName = "RevitTestControl.AppsAvailability";
Button = ribbonPanel.AddItem(bData) as PushButton;
Button.ToolTip = "Switch On 0% selected element";
pbImage = new BitmapImage(new Uri(thisAssemblyDir + "/Resources/LightOff.ico"));
Button.LargeImage = pbImage;
bData = new PushButtonData(
"SetValue",
"0",
thisAssemblyPath,
"RevitTestControl.LightControl.SetValue");
bData.AvailabilityClassName = "RevitTestControl.AppsAvailability";
_ButtonToChange = ribbonPanel.AddItem(bData) as PushButton;
_ButtonToChange.ToolTip = "Set value of selected element";
pbImage = new BitmapImage(new Uri(thisAssemblyDir + "/Resources/IconAmpoule.ico"));
_ButtonToChange.LargeImage = pbImage;
bData = new PushButtonData(
"Consommation électrique",
"Consommation électrique",
thisAssemblyPath,
"RevitTestControl.LightControl.LightEnergy");
bData.AvailabilityClassName = "RevitTestControl.AppsAvailability";
_ButtonToChange = ribbonPanel.AddItem(bData) as PushButton;
_ButtonToChange.ToolTip = "Consommation électrique";
pbImage = new BitmapImage(new Uri(thisAssemblyDir + "/Resources/energy.ico"));
_ButtonToChange.LargeImage = pbImage;
bData = new PushButtonData(
"LightConfiguration",
"Configuration",
thisAssemblyPath,
"RevitTestControl.LightControl.Configuration");
bData.AvailabilityClassName = "RevitTestControl.AppsAvailability";
Button = ribbonPanel.AddItem(bData) as PushButton;
Button.ToolTip = "Configure dynamic behaviour for selected element";
pbImage = new BitmapImage(new Uri(thisAssemblyDir + "/Resources/Configuration.ico"));
Button.LargeImage = pbImage;
// Add a new ribbon panel for temperatures
ribbonPanel = application.CreateRibbonPanel(tabName, "Temperatures");
bData = new PushButtonData(
"TempButton",
"Temperatures",
thisAssemblyPath,
"RevitTestControl.Temperatures.Temperature");
Button = ribbonPanel.AddItem(bData) as PushButton;
Button.ToolTip = "Get temperature for building";
pbImage = new BitmapImage(new Uri(thisAssemblyDir + "/Resources/Temp.ico"));
Button.LargeImage = pbImage;
// Add a new ribbon panel for temperatures
ribbonPanel = application.CreateRibbonPanel(tabName, "Windows");
bData = new PushButtonData(
"TempWindow",
"Windows",
thisAssemblyPath,
"RevitTestControl.Fenetres.Windows");
Button = ribbonPanel.AddItem(bData) as PushButton;
Button.ToolTip = "Get open state of windows";
pbImage = new BitmapImage(new Uri(thisAssemblyDir + "/Resources/window.ico"));
Button.LargeImage = pbImage;
// Add a new ribbon panel for GTB
ribbonPanel = application.CreateRibbonPanel(tabName, "GTB");
bData = new PushButtonData(
"TempGtb",
"VMC",
thisAssemblyPath,
"RevitTestControl.CVC.VMC");
Button = ribbonPanel.AddItem(bData) as PushButton;
Button.ToolTip = "View VMC data";
pbImage = new BitmapImage(new Uri(thisAssemblyDir + "/Resources/vmc.ico"));
Button.LargeImage = pbImage;
bData = new PushButtonData(
"TempCC",
"Chauffage climatisation",
thisAssemblyPath,
"RevitTestControl.CVC.CC");
Button = ribbonPanel.AddItem(bData) as PushButton;
Button.ToolTip = "Chauffage climatisation";
pbImage = new BitmapImage(new Uri(thisAssemblyDir + "/Resources/cc.ico"));
Button.LargeImage = pbImage;
// Add a new ribbon panel
ribbonPanel = application.CreateRibbonPanel(tabName, "Information");
// create push button for CurveTotalLength
PushButtonData b1Data = new PushButtonData(
"LightControl",
"Show Element Data",
thisAssemblyPath,
"RevitTestControl.TestControl");
//b1Data.cate
PushButton pb1 = ribbonPanel.AddItem(b1Data) as PushButton;
pb1.ToolTip = "Get data rom selected element";
//BitmapImage pb1Image = new BitmapImage(new Uri("pack://application:,,,/RevitTestControl;component/Resources/IconAmpoule.ico"));
BitmapImage pb1Image = new BitmapImage(new Uri(thisAssemblyDir + "/Resources/Information.png"));
pb1.LargeImage = pb1Image;
}
/// <summary>
/// Add buttons for the commands we define in this labs.
/// Here we stack three push buttons and repeat it as we get more.
/// </summary>
public void AddUILabsCommandButtons(RibbonPanel panel)
{
// Get the location of this dll.
string assembly = GetType().Assembly.Location;
// Create three push buttons to stack up
// #1
PushButtonData pushButtonData1 = new PushButtonData("UILabsSelection", "Pick Sampler", assembly, _uiLabName + ".UISelection");
pushButtonData1.Image = NewBitmapImage("basics.ico");
// #2
PushButtonData pushButtonData2 = new PushButtonData("UILabsCreateHouse", "Create House Pick", assembly, _uiLabName + ".UICreateHouse");
pushButtonData2.Image = NewBitmapImage("House.ico");
// #3
PushButtonData pushButtonData3 = new PushButtonData("UILabsTaskDialog", "Dialog Sampler", assembly, _uiLabName + ".UITaskDialog");
pushButtonData3.Image = NewBitmapImage("basics.ico");
// #4
PushButtonData pushButtonData4 = new PushButtonData("UILabsCreateHouseDialog", "Create House Dialog", assembly, _uiLabName + ".UICreateHouseDialog");
pushButtonData4.Image = NewBitmapImage("House.ico");
// #5
// Make three sets of pull down
PulldownButtonData pulldownBtnData1 = new PulldownButtonData("UILabsPulldownButton1", "Selection");
PulldownButtonData pulldownBtnData2 = new PulldownButtonData("UILabsPulldownButton2", "Task Dialog");
// Create three item stack.
IList<RibbonItem> stackedItems = panel.AddStackedItems(pulldownBtnData1, pulldownBtnData2);
PulldownButton pulldownBtn1 = stackedItems[0] as PulldownButton;
PulldownButton pulldownBtn2 = stackedItems[1] as PulldownButton;
pulldownBtn1.Image = NewBitmapImage("Basics.ico");
pulldownBtn2.Image = NewBitmapImage("Basics.ico");
// Add each sub items
PushButton button1 = pulldownBtn1.AddPushButton(pushButtonData1);
PushButton button2 = pulldownBtn1.AddPushButton(pushButtonData2);
PushButton button3 = pulldownBtn2.AddPushButton(pushButtonData3);
PushButton button4 = pulldownBtn2.AddPushButton(pushButtonData4);
// Note: we need to set the image later. if we do in button data, it won't show in the Ribbon.
button1.Image = NewBitmapImage("Basics.ico");
button2.Image = NewBitmapImage("Basics.ico");
button3.Image = NewBitmapImage("Basics.ico");
button4.Image = NewBitmapImage("Basics.ico");
}
/// <summary>
/// This method is used to create RibbonSample panel, and add wall related command buttons to it:
/// 1. contains a SplitButton for user to create Non-Structural or Structural Wall;
/// 2. contains a StackedBotton which is consisted with one PushButton and two Comboboxes,
/// PushButon is used to reset all the RibbonItem, Comboboxes are use to select Level and WallShape
/// 3. contains a RadioButtonGroup for user to select WallType.
/// 4. Adds a Slide-Out Panel to existing panel with following functionalities:
/// 5. a text box is added to set mark for new wall, mark is a instance parameter for wall,
/// Eg: if user set text as "wall", then Mark for each new wall will be "wall1", "wall2", "wall3"....
/// 6. a StackedButton which consisted of a PushButton (delete all the walls) and a PulldownButton (move all the walls in X or Y direction)
/// </summary>
/// <param name="application">An object that is passed to the external application
/// which contains the controlled application.</param>
private void CreateRibbonSamplePanel(UIControlledApplication application)
{
// create a Ribbon panel which contains three stackable buttons and one single push button.
string firstPanelName = "Ribbon Sample";
RibbonPanel ribbonSamplePanel = application.CreateRibbonPanel(firstPanelName);
#region Create a SplitButton for user to create Non-Structural or Structural Wall
SplitButtonData splitButtonData = new SplitButtonData("NewWallSplit", "Create Wall");
SplitButton splitButton = ribbonSamplePanel.AddItem(splitButtonData) as SplitButton;
PushButton pushButton = splitButton.AddPushButton(new PushButtonData("WallPush", "Wall", AddInPath, "Revit.SDK.Samples.Ribbon.CS.CreateWall"));
pushButton.LargeImage = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "CreateWall.png"), UriKind.Absolute));
pushButton.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "CreateWall-S.png"), UriKind.Absolute));
pushButton.ToolTip = "Creates a partition wall in the building model.";
pushButton.ToolTipImage = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "CreateWallTooltip.bmp"), UriKind.Absolute));
pushButton = splitButton.AddPushButton(new PushButtonData("StrWallPush", "Structure Wall", AddInPath, "Revit.SDK.Samples.Ribbon.CS.CreateStructureWall"));
pushButton.LargeImage = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "StrcturalWall.png"), UriKind.Absolute));
pushButton.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "StrcturalWall-S.png"), UriKind.Absolute));
#endregion
ribbonSamplePanel.AddSeparator();
#region Add a StackedButton which is consisted of one PushButton and two Comboboxes
PushButtonData pushButtonData = new PushButtonData("Reset", "Reset", AddInPath, "Revit.SDK.Samples.Ribbon.CS.ResetSetting");
ComboBoxData comboBoxDataLevel = new ComboBoxData("LevelsSelector");
ComboBoxData comboBoxDataShape = new ComboBoxData("WallShapeComboBox");
IList <RibbonItem> ribbonItemsStacked = ribbonSamplePanel.AddStackedItems(pushButtonData, comboBoxDataLevel, comboBoxDataShape);
((PushButton)(ribbonItemsStacked[0])).Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "Reset.png"), UriKind.Absolute));
//Add options to WallShapeComboBox
Autodesk.Revit.UI.ComboBox comboboxWallShape = (Autodesk.Revit.UI.ComboBox)(ribbonItemsStacked[2]);
ComboBoxMemberData comboBoxMemberData = new ComboBoxMemberData("RectangleWall", "RectangleWall");
ComboBoxMember comboboxMember = comboboxWallShape.AddItem(comboBoxMemberData);
comboboxMember.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "RectangleWall.png"), UriKind.Absolute));
comboBoxMemberData = new ComboBoxMemberData("CircleWall", "CircleWall");
comboboxMember = comboboxWallShape.AddItem(comboBoxMemberData);
comboboxMember.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "CircleWall.png"), UriKind.Absolute));
comboBoxMemberData = new ComboBoxMemberData("TriangleWall", "TriangleWall");
comboboxMember = comboboxWallShape.AddItem(comboBoxMemberData);
comboboxMember.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "TriangleWall.png"), UriKind.Absolute));
comboBoxMemberData = new ComboBoxMemberData("SquareWall", "SquareWall");
comboboxMember = comboboxWallShape.AddItem(comboBoxMemberData);
comboboxMember.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "SquareWall.png"), UriKind.Absolute));
#endregion
ribbonSamplePanel.AddSeparator();
#region Add a RadioButtonGroup for user to select WallType
RadioButtonGroupData radioButtonGroupData = new RadioButtonGroupData("WallTypeSelector");
RadioButtonGroup radioButtonGroup = (RadioButtonGroup)(ribbonSamplePanel.AddItem(radioButtonGroupData));
ToggleButton toggleButton = radioButtonGroup.AddItem(new ToggleButtonData("Generic8", "Generic - 8\"", AddInPath, "Revit.SDK.Samples.Ribbon.CS.Dummy"));
toggleButton.LargeImage = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "Generic8.png"), UriKind.Absolute));
toggleButton.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "Generic8-S.png"), UriKind.Absolute));
toggleButton = radioButtonGroup.AddItem(new ToggleButtonData("ExteriorBrick", "Exterior - Brick", AddInPath, "Revit.SDK.Samples.Ribbon.CS.Dummy"));
toggleButton.LargeImage = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "ExteriorBrick.png"), UriKind.Absolute));
toggleButton.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "ExteriorBrick-S.png"), UriKind.Absolute));
#endregion
//slide-out panel:
ribbonSamplePanel.AddSlideOut();
#region add a Text box to set the mark for new wall
TextBoxData testBoxData = new TextBoxData("WallMark");
Autodesk.Revit.UI.TextBox textBox = (Autodesk.Revit.UI.TextBox)(ribbonSamplePanel.AddItem(testBoxData));
textBox.Value = "new wall"; //default wall mark
textBox.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "WallMark.png"), UriKind.Absolute));
textBox.ToolTip = "Set the mark for new wall";
textBox.ShowImageAsButton = true;
textBox.EnterPressed += new EventHandler <Autodesk.Revit.UI.Events.TextBoxEnterPressedEventArgs>(SetTextBoxValue);
#endregion
ribbonSamplePanel.AddSeparator();
#region Create a StackedButton which consisted of a PushButton (delete all the walls) and a PulldownButton (move all the walls in X or Y direction)
PushButtonData deleteWallsButtonData = new PushButtonData("deleteWalls", "Delete Walls", AddInPath, "Revit.SDK.Samples.Ribbon.CS.DeleteWalls");
deleteWallsButtonData.ToolTip = "Delete all the walls created by the Create Wall tool.";
deleteWallsButtonData.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "DeleteWalls.png"), UriKind.Absolute));
PulldownButtonData moveWallsButtonData = new PulldownButtonData("moveWalls", "Move Walls");
moveWallsButtonData.ToolTip = "Move all the walls in X or Y direction";
moveWallsButtonData.Image = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "MoveWalls.png"), UriKind.Absolute));
// create stackable buttons
IList <RibbonItem> ribbonItems = ribbonSamplePanel.AddStackedItems(deleteWallsButtonData, moveWallsButtonData);
// add two push buttons as sub-items of the moveWalls PulldownButton.
PulldownButton moveWallItem = ribbonItems[1] as PulldownButton;
PushButton moveX = moveWallItem.AddPushButton(new PushButtonData("XDirection", "X Direction", AddInPath, "Revit.SDK.Samples.Ribbon.CS.XMoveWalls"));
moveX.ToolTip = "move all walls 10 feet in X direction.";
moveX.LargeImage = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "MoveWallsXLarge.png"), UriKind.Absolute));
PushButton moveY = moveWallItem.AddPushButton(new PushButtonData("YDirection", "Y Direction", AddInPath, "Revit.SDK.Samples.Ribbon.CS.YMoveWalls"));
moveY.ToolTip = "move all walls 10 feet in Y direction.";
moveY.LargeImage = new BitmapImage(new Uri(Path.Combine(ButtonIconsFolder, "MoveWallsYLarge.png"), UriKind.Absolute));
#endregion
ribbonSamplePanel.AddSeparator();
application.ControlledApplication.DocumentCreated += new EventHandler <Autodesk.Revit.DB.Events.DocumentCreatedEventArgs>(DocumentCreated);
}
/// <summary>
/// Control buttons for Event and Dynamic Model Update
/// </summary>
public void AddUILabsCommandButtons2(RibbonPanel panel)
{
// Get the location of this dll.
string assembly = GetType().Assembly.Location;
// Create three toggle buttons for radio button group
// #1
ToggleButtonData toggleButtonData1 = new ToggleButtonData("UILabsEventOn", "Event" + "\n Off", assembly, _uiLabName + ".UIEventOff");
toggleButtonData1.LargeImage = NewBitmapImage("Basics.ico");
// #2
ToggleButtonData toggleButtonData2 = new ToggleButtonData("UILabsEventOff", "Event" + "\n On", assembly, _uiLabName + ".UIEventOn");
toggleButtonData2.LargeImage = NewBitmapImage("Basics.ico");
// Create three toggle buttons for radio button group
// #3
ToggleButtonData toggleButtonData3 = new ToggleButtonData("UILabsDynUpdateOn", "Center" + "\n Off", assembly, _uiLabName + ".UIDynamicModelUpdateOff");
toggleButtonData3.LargeImage = NewBitmapImage("Families.ico");
// #4
ToggleButtonData toggleButtonData4 = new ToggleButtonData("UILabsDynUpdateOff", "Center" + "\n On", assembly, _uiLabName + ".UIDynamicModelUpdateOn");
toggleButtonData4.LargeImage = NewBitmapImage("Families.ico");
// Make event pn/off radio button group
RadioButtonGroupData radioBtnGroupData1 = new RadioButtonGroupData("EventNotification");
RadioButtonGroup radioBtnGroup1 = panel.AddItem(radioBtnGroupData1) as RadioButtonGroup;
radioBtnGroup1.AddItem(toggleButtonData1);
radioBtnGroup1.AddItem(toggleButtonData2);
// Make dyn update on/off radio button group
RadioButtonGroupData radioBtnGroupData2 = new RadioButtonGroupData("WindowDoorCenter");
RadioButtonGroup radioBtnGroup2 = panel.AddItem(radioBtnGroupData2) as RadioButtonGroup;
radioBtnGroup2.AddItem(toggleButtonData3);
radioBtnGroup2.AddItem(toggleButtonData4);
}
public void showSysMenu()
{
int ritemCount = ribbonControl1.Items.Count - 1;
for (int i = 0; i < ritemCount; i++)
{
ribbonControl1.Items.Remove(0);
}
for (int i = 0; i < modules.Count; i++)
{
#region 循环插入模块
DevComponents.DotNetBar.RibbonTabItem ribbonTabItemModule = new RibbonTabItem();
DevComponents.DotNetBar.RibbonPanel rPanel = new RibbonPanel();
ribbonTabItemModule.Panel = rPanel;
//this.ribbonControl1.SuspendLayout();
rPanel.SuspendLayout();
rPanel.Dock = DockStyle.Fill;
rPanel.Name = "panel" + modules[i].ModuleId.ToString();
rPanel.Style.CornerType = DevComponents.DotNetBar.eCornerType.Square;
rPanel.StyleMouseDown.CornerType = DevComponents.DotNetBar.eCornerType.Square;
rPanel.StyleMouseOver.CornerType = DevComponents.DotNetBar.eCornerType.Square;
rPanel.Location = new Point(0, 0x3a);
rPanel.Margin = new System.Windows.Forms.Padding(3, 4, 3, 4);
rPanel.Padding = new System.Windows.Forms.Padding(3, 0, 3, 4);
rPanel.Size = new Size(0x47a, 0x73);
//ribbonTabItemModule.Checked = true;
//ribbonTabItemModule.ItemAlignment = eItemAlignment.Near;
ribbonTabItemModule.Name = "module" + modules[i].ModuleId.ToString();
ribbonTabItemModule.Text = modules[i].Name;
ribbonTabItemModule.Tag = modules[i];
DevComponents.DotNetBar.RibbonBar rMenuClass = null;
#region 增加子菜单
List<BaseMenu> _menus = menus.FindAll(x => (x.ModuleId == modules[i].ModuleId && x.PMenuId == -1)).OrderByDescending(x => x.SortId).ToList();
if (_menus.Count > 0)
{
//List<RibbonBar> listbar = new List<RibbonBar>();
for (int j = 0; j < _menus.Count; j++)
{
if (string.IsNullOrEmpty(_menus[j].DllName) && string.IsNullOrEmpty(_menus[j].UrlId))
{
//为二级分类菜单
DevComponents.DotNetBar.RibbonBar menuClass = new RibbonBar();
menuClass.AutoOverflowEnabled = true;
menuClass.Dock = System.Windows.Forms.DockStyle.Left;
menuClass.ContainerControlProcessDialogKey = true;
menuClass.Text = _menus[j].Name;
//三级菜单
List<BaseMenu> mainMenu = menus.FindAll(x => x.PMenuId == _menus[j].MenuId).OrderByDescending(x => x.SortId).ToList();
foreach (BaseMenu menu in mainMenu)
{
DevComponents.DotNetBar.ButtonItem btnmenu = new ButtonItem(menu.MenuId.ToString(), menu.Name);
// btnmenu.Image = global::EFWBaseLib.Properties.Resources.defaulttool;
if (!string.IsNullOrEmpty(menu.Image))
{
btnmenu.Image = new Bitmap(Image.FromFile(EFWCoreLib.CoreFrame.Init.AppGlobal.AppRootPath + menu.Image), 32, 32);
}
else
{
btnmenu.Image = new Bitmap(Image.FromFile(EFWCoreLib.CoreFrame.Init.AppGlobal.AppRootPath + @"images\defaultmenu.ico"), 32, 32);
}
// btnmenu.ImageListSizeSelection = DevComponents.DotNetBar.eButtonImageListSelection.Large;
btnmenu.ImagePosition = DevComponents.DotNetBar.eImagePosition.Top;
btnmenu.Text = menu.Name;
btnmenu.Tag = menu;
btnmenu.Click += new EventHandler(btnmenu_Click);
menuClass.Items.Add(btnmenu);
}
//listbar.Add(menuClass);
rPanel.Controls.Add(menuClass);
//rPanel.Refresh();
}
else
{
//菜单没有二级分类菜单则创建默认二级分类菜单
if (rMenuClass == null)
{
rMenuClass = new RibbonBar();
rMenuClass.AutoOverflowEnabled = true;
rMenuClass.Dock = System.Windows.Forms.DockStyle.Left;
rMenuClass.Text = "操作功能";
rPanel.Controls.Add(rMenuClass);
}
DevComponents.DotNetBar.ButtonItem btnmenu = new ButtonItem(_menus[j].MenuId.ToString(), _menus[j].Name);
//btnmenu.Image = global::EFWBaseLib.Properties.Resources.defaulttool;
//btnmenu.ImageListSizeSelection = DevComponents.DotNetBar.eButtonImageListSelection.Large;
if (!string.IsNullOrEmpty(_menus[j].Image))
{
btnmenu.Image = Image.FromFile(EFWCoreLib.CoreFrame.Init.AppGlobal.AppRootPath + _menus[j].Image);
btnmenu.Image = new Bitmap(Image.FromFile(EFWCoreLib.CoreFrame.Init.AppGlobal.AppRootPath + _menus[j].Image), 32, 32);
}
else
{
btnmenu.Image = Image.FromFile(EFWCoreLib.CoreFrame.Init.AppGlobal.AppRootPath + @"images\defaultmenu.ico");
}
btnmenu.ImagePosition = DevComponents.DotNetBar.eImagePosition.Top;
btnmenu.Text = _menus[j].Name;
btnmenu.Tag = _menus[j];
btnmenu.Click += new EventHandler(btnmenu_Click);
rMenuClass.Items.Add(btnmenu);
}
}
}
#endregion
ribbonControl1.Items.Insert(ribbonControl1.Items.Count - 1, ribbonTabItemModule);
ribbonControl1.Controls.Add(rPanel);
rPanel.ResumeLayout(false);
ribbonTabItemModule.Refresh();
#endregion
}
ribbonControl1.Show();
//ribbonTabItem1.Visible = false;
//ribbonTabItem2.Visible = false;
ribbonControl1.Refresh();
this.Refresh();
ribbonControl1.SelectFirstVisibleRibbonTab();
}
/// <summary>
/// Adds the button to a specified ribbon panel.
/// </summary>
/// <param name="ribbonPanel">The ribbon panel.</param>
/// <param name="targetControlName">The name of an existing control to position the button next to.</param>
/// <param name="insertBeforeTargetControl">A value that indicates whether to position the button before or
/// after the target control.</param>
/// <exception cref="ArgumentNullException"><paramref name="ribbonPanel"/> or
/// <paramref name="targetControlName"/> is <c>null</c>.</exception>
public void AddTo(RibbonPanel ribbonPanel, string targetControlName, bool insertBeforeTargetControl)
{
if (ribbonPanel == null)
throw new ArgumentNullException(nameof(ribbonPanel));
if (targetControlName == null)
throw new ArgumentNullException(nameof(targetControlName));
ribbonPanel.CommandControls.AddButton(
ButtonDefinition: _buttonDefinition,
UseLargeIcon: true,
ShowText: true,
TargetControlInternalName: targetControlName,
InsertBeforeTargetControl: insertBeforeTargetControl
);
}
public Result Execute(
ExternalCommandData commandData,
ref string message,
ElementSet elements)
{
UIApplication uiapp = commandData.Application;
UIDocument uidoc = uiapp.ActiveUIDocument;
Application app = uiapp.Application;
Document doc = uidoc.Document;
if (!(doc.ActiveView is ViewPlan viewPlan))
{
TaskDialog.Show("Please select Plan view", "Select Plan view to change it's View Range");
return(Result.Succeeded);
}
PlanViewRange viewRange = viewPlan.GetViewRange();
double CCut = viewRange.GetOffset(PlanViewPlane.CutPlane);
double CTop = viewRange.GetOffset(PlanViewPlane.TopClipPlane);
RibbonPanel inputpanel = null;
ComboBox inputbox = null;
foreach (RibbonPanel panel in uiapp.GetRibbonPanels("Exp. Add-Ins"))
{
if (panel.Name == "View Tools")
{
inputpanel = panel;
}
}
foreach (RibbonItem item in inputpanel.GetItems())
{
if (item.Name == "ShiftRange")
{
inputbox = (ComboBox)item;
}
}
List <Double> vrOpts = new List <Double> {
StoreExp.vrOpt1, StoreExp.vrOpt2, StoreExp.vrOpt3,
StoreExp.vrOpt4, StoreExp.vrOpt5, StoreExp.vrOpt6
};
double mod = vrOpts[Int32.Parse(inputbox.Current.Name)];
if (viewPlan.ViewType != ViewType.CeilingPlan)
{
viewRange.SetOffset(PlanViewPlane.CutPlane, CCut + mod);
viewRange.SetOffset(PlanViewPlane.TopClipPlane, CCut + mod);
}
if (viewPlan.ViewType == ViewType.CeilingPlan)
{
viewRange.SetOffset(PlanViewPlane.TopClipPlane, CTop + mod);
viewRange.SetOffset(PlanViewPlane.ViewDepthPlane, CTop + mod);
}
using (Transaction t = new Transaction(doc, "Set View Range"))
{
try
{
t.Start();
viewPlan.SetViewRange(viewRange);
t.Commit();
}
catch
{ TaskDialog.Show("Error", "Cannot shift ViewRange this way."); }
}
return(Result.Succeeded);
}
public void PullDown(RibbonPanel panel)
{
//creates a Push button for the get selection command
PushButtonData bgetselect = new PushButtonData("getselec", "Get Selection", assemblyloca, "Application.App");
}
public Result OnStartup(UIControlledApplication application)
{
try
{
m_startTime = DateTime.Now;
Metrics.AppendLog("Launching Arcadis Main Application");
Metrics.AppendLog("Session Start: " + m_startTime.ToString());
//Language info
//-------------
CultureInfo ci = Thread.CurrentThread.CurrentCulture;
var ri = new RegionInfo(ci.Name);
Utils.k_systemCountry = ri.DisplayName;
Utils.k_systemLanguage = ci.NativeName;
Utils.k_revitLanguage = application.ControlledApplication.Language.ToString();
Metrics.AppendLog("System Language: " + Utils.k_systemLanguage);
Metrics.AppendLog("System Country: " + Utils.k_systemCountry);
Metrics.AppendLog("Revit language: " + Utils.k_revitLanguage);
Metrics.AppendLog("\r\nChecking for new versions");
Utils.g_controlledUIApp = application;
Assembly mainAssembly = Assembly.GetExecutingAssembly();
Utils.g_mainAssemblyPath = mainAssembly.Location;
m_revitAddinPath = Path.GetDirectoryName(Utils.g_mainAssemblyPath);
string locPath = Utils.g_mainAssemblyPath;
string Revit = string.Empty;
if (m_revitAddinPath.Contains("2018"))
{
Revit = "2018";
}
else if (m_revitAddinPath.Contains("2019"))
{
Revit = "2019";
}
else if (m_revitAddinPath.Contains("2020"))
{
Revit = "2020";
}
else if (m_revitAddinPath.Contains("2021"))
{
Revit = "2021";
}
Utils.k_revitVersion = Revit;
Metrics.AppendLog("Revit Version: " + Utils.k_revitVersion);
string arcadisRepository = Path.Combine(Utils.k_repository, Utils.k_revitVersion);
Metrics.AppendLog("Repository : " + arcadisRepository);
MainUserPreferences up = MainUserPreferences.GetUserPreferences();
IList <string> modules = up.ToolModules;
foreach (string assemblyName in modules)
{
string repoPath = Path.Combine(arcadisRepository, assemblyName);
string revitPath = Path.Combine(m_revitAddinPath, assemblyName);
string revitVersion = string.Empty;
string repoVersion = string.Empty;
try
{
revitVersion = FileVersionInfo.GetVersionInfo(revitPath).ProductVersion;
}
catch
{
revitVersion = "Not Found";
}
try
{
repoVersion = FileVersionInfo.GetVersionInfo(repoPath).ProductVersion;
}
catch
{
repoVersion = "Not Found";
}
AssemblyVersion module = new AssemblyVersion();
module.AssemblyName = assemblyName;
module.CurrentVersion = revitVersion;
module.RepositoryVersion = repoVersion;
Utils.s_assemblies.Add(module);
if (repoVersion != revitVersion)
{
newAssemblies.Add(module);
}
}
if (newAssemblies.Count > 0)
{
VersionsForm form = new VersionsForm();
form.NewAssemblies = newAssemblies;
form.RevitAddInPath = m_revitAddinPath;
form.RepositoryPath = arcadisRepository;
form.ShowDialog();
}
//Create Arcadis Tabs
//-------------------
application.CreateRibbonTab(Utils.k_arcadisMainTab);
ToolbarTab mainTab = AddTabs(Utils.k_arcadisMainTab, true);
application.CreateRibbonTab(Utils.k_arcadisToolsTab);
ToolbarTab toolsTab = AddTabs(Utils.k_arcadisToolsTab, false);
// About Arcadis Tools Panel
//--------------------------
RibbonPanel panel = application.CreateRibbonPanel(Utils.k_arcadisMainTab, Utils.k_arcadisPanel);
ToolbarPanel toolPanel = new ToolbarPanel(panel.Name, panel, "ArcadisMain.dll");
mainTab.Panels.Add(toolPanel);
string strCommand = "ArcadisMain.About_Command";
Bitmap bitmap = Properties.Resources.Info;
Bitmap bitmapHelp = Properties.Resources.AboutHelp;
string helpURL = "https://www.arcadis.com/en/global/";
ContextualHelp contextHelp = new ContextualHelp(ContextualHelpType.Url, helpURL);
string longDesc = "Long help description for command button. Can include a long descriptive text with and an optional image.";
Utils.CreateCommand(panel, toolPanel, "About Tools", "About Tools", locPath, strCommand, bitmap, "Information about Arcadis automation tools", bitmapHelp, longDesc, contextHelp);
strCommand = "ArcadisMain.Settings_Command";
bitmap = Properties.Resources.settings;
bitmapHelp = Properties.Resources.SettingsHelp;
helpURL = "https://help.autodesk.com/view/RVT/2020/ENU/?guid=GUID-35DE66AB-6EF5-48C0-B477-F3B1B120F18A";
contextHelp = new ContextualHelp(ContextualHelpType.Url, helpURL);
Utils.CreateCommand(panel, toolPanel, Utils.k_settings, Utils.k_settings, locPath, strCommand, bitmap, "Arcadis Toolbar Settings", bitmapHelp, longDesc, contextHelp);
strCommand = "ArcadisMain.Ribbon_Command";
bitmap = Properties.Resources.Ribbon;
bitmapHelp = Properties.Resources.MetricsHelp;
Utils.CreateCommand(panel, toolPanel, "Ribbon Settings", "Ribbon Settings", locPath, strCommand, bitmap, "Select Tools for Ribbon", bitmapHelp, longDesc, contextHelp);
strCommand = "ArcadisMain.Metrics_Command";
bitmap = Properties.Resources.BarChart2;
bitmapHelp = Properties.Resources.MetricsHelp;
Utils.CreateCommand(panel, toolPanel, "Metrics Tracker", "Metrics Tracker", locPath, strCommand, bitmap, "Display session Metrics Tracker Log", bitmapHelp, longDesc, contextHelp);
foreach (string module in up.ToolModules)
{
//string addinPath = Path.Combine(Utils.g_mainAssemblyPath, module);
//addinPath = m_revitAddinPath;
string addinFile = Path.GetFileNameWithoutExtension(module) + ".addin";
string addinPath = Path.Combine(m_revitAddinPath, addinFile);
try
{
Utils.LoadAddin(addinPath);
}
catch (Exception ex)
{
TaskDialog.Show("Exception MainApp L202", ex.Message);
}
}
}
catch (Exception ex)
{
Metrics.AppendLog("\r\nException: " + ex.Message);
TaskDialog.Show("Exception", ex.Message);
return(Result.Failed);
}
return(Result.Succeeded);
}
private RibbonBar GetRibbonBar([NotNull] RibbonPanel ribbon, [Required] string bar)
{
return(ribbon.Controls.OfType <RibbonBar>().FirstOrDefault(x => bar.IsEqual(x.Text)));
}
public void Activate(Inventor.ApplicationAddInSite addInSiteObject, bool firstTime)
{
// This method is called by Inventor when it loads the addin.
// The AddInSiteObject provides access to the Inventor Application object.
// The FirstTime flag indicates if the addin is loaded for the first time.
// Initialize AddIn members.
m_inventorApplication = addInSiteObject.Application;
// Create Icon
ControlDefinitions controlDefs = m_inventorApplication.CommandManager.ControlDefinitions;
Icon smallPush = InvAddIn.Properties.Resources.costEstimateIcon;
Icon largePush = InvAddIn.Properties.Resources.costEstimateIcon;
stdole.IPictureDisp smallCostIcon = PictureDispConverter.ToIPictureDisp(smallPush);
stdole.IPictureDisp largCostIcon = PictureDispConverter.ToIPictureDisp(largePush);
m_CostEstimator = controlDefs.AddButtonDefinition("Estimator", "Open Cost Estimator Window.", CommandTypesEnum.kFilePropertyEditCmdType, addInGUID, "Open Cost Estimator Window.", "Cost Estimator", smallCostIcon, largCostIcon);
if (firstTime)
{
try
{
if (m_inventorApplication.UserInterfaceManager.InterfaceStyle == InterfaceStyleEnum.kRibbonInterface)
{
// Assembly Button
Ribbon assemblyRibbon = m_inventorApplication.UserInterfaceManager.Ribbons["Assembly"];
RibbonTab toolsTab = assemblyRibbon.RibbonTabs["id_TabTools"];
// Part Buttons
Ribbon partRibbon = m_inventorApplication.UserInterfaceManager.Ribbons["Part"];
RibbonTab toolsPartTab = partRibbon.RibbonTabs["id_TabTools"];
try
{
// For ribbon interface
// This is a new panel that can be made
RibbonPanel panel = toolsTab.RibbonPanels.Add("Cost Estimator", "Autodesk:Cost Estimator:Panel1", addInGUID, "", false);
CommandControl control1 = panel.CommandControls.AddButton(m_CostEstimator, true, true, "", false);
RibbonPanel pane1_part = toolsPartTab.RibbonPanels.Add("Cost Estimator", "Autodesk:Cost Estimator:pane1_part", addInGUID, "", false);
CommandControl control2 = pane1_part.CommandControls.AddButton(m_CostEstimator, true, true, "", false);
}
catch (Exception ex)
{
Console.WriteLine(ex.Message);
}
}
else
{
// For classic interface, possibly incorrect code
CommandBar oCommandBar = m_inventorApplication.UserInterfaceManager.CommandBars["AMxAssemblyPanelCmdBar"];
oCommandBar.Controls.AddButton(m_CostEstimator, 0);
}
}
catch
{
// For classic interface, possibly incorrect code
CommandBar oCommandBar = m_inventorApplication.UserInterfaceManager.CommandBars["AMxAssemblyPanelCmdBar"];
oCommandBar.Controls.AddButton(m_CostEstimator, 0);
}
}
m_CostEstimator.OnExecute += new ButtonDefinitionSink_OnExecuteEventHandler(m_CostEstimator_OnExecute);
// TODO: Add ApplicationAddInServer.Activate implementation.
// e.g. event initialization, command creation etc.
}
public RibbonPanelRenderEventArgs(Ribbon owner, Graphics g, Rectangle clip, RibbonPanel panel, Control canvas)
: base(owner, g, clip)
{
Panel = panel;
Canvas = canvas;
}
private void AddPushButtonData(string name, string text, string description, string className, RibbonPanel panel, Source.Source imageSource, bool avclass)
{
PushButtonData data = new PushButtonData(name, text, Assembly.GetExecutingAssembly().Location, className);
PushButton button = panel.AddItem(data) as PushButton;
button.ToolTip = description;
if (avclass)
{
button.AvailabilityClassName = "BatchModelCheck.Availability.StaticAvailable";
}
button.LongDescription = string.Format("Верстия: {0}\nСборка: {1}-{2}", ModuleData.Version, ModuleData.Build, ModuleData.Date);
button.ItemText = text;
button.LargeImage = new BitmapImage(new Uri(imageSource.Value));
}