/// <summary>
/// 从FICT PLC 接收数据
/// </summary>
/// <param name="outdata"></param>
/// <param name="msgflag">是否显示結果</param>
private void receivePLC(ref string outdata, bool msgflag)
{
int iA = -1;
int iB = -1;
if (readPLC(FICT_PLC_Read_AddressA, ref iA) && readPLC(FICT_PLC_Read_AddressB, ref iB))
{
try
{
outdata = Other.Chr(iA) + Other.Chr(iB);
}
catch (Exception)
{
}
if (msgflag)
{
SubFunction.updateMessage(lstCommandList, "FICT->PC:" + outdata);
SubFunction.saveLog(Param.logType.SYSLOG.ToString(), "FICT->PC:" + outdata);
SubFunction.saveLog(Param.logType.COMLOG.ToString(), "FICT->PC:" + outdata);
}
}
else
{
SubFunction.updateMessage(lstCommandList, "FICT->PC:" + outdata + " Fail");
SubFunction.saveLog(Param.logType.SYSLOG.ToString(), "FICT->PC:" + outdata + " Fail");
SubFunction.saveLog(Param.logType.COMLOG.ToString(), "FICT->PC:" + outdata + " Fail");
}
}
private void ScanRetryReadBarcode(SerialPort sp, string str1, string str2)
{
updateMessage(lstMessage, str1 + " close...");
saveLog(p.LogType.SysLog, str1 + " close...");
if (p.Send_Command_Use_Hex)
{
sendHex(sp, p.Close_Scan_Command);
}
else
{
if (p.Close_Add_Enter)
{
sendData(sp, p.Close_Scan_Command + Other.Chr(13));
}
else
{
sendData(sp, p.Close_Scan_Command);
}
}
updateMessage(lstMessage, str2 + p.Close_Scan_Command);
saveLog(p.LogType.SysLog, str2 + p.Close_Scan_Command);
Delay(500);
if (p.Send_Command_Use_Hex)
{
sendHex(sp, p.Open_Scan_Command);
}
else
{
if (p.Open_Add_Enter)
{
sendData(sp, p.Open_Scan_Command + Other.Chr(13));
}
else
{
sendData(sp, p.Open_Scan_Command);
}
}
updateMessage(lstMessage, str2 + p.Open_Scan_Command);
saveLog(p.LogType.SysLog, str2 + p.Open_Scan_Command);
}
private void spBar_B_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
if (spBar_B.BytesToRead == 0)
{
return;
}
try
{
string sReceive = spBar_B.ReadTo(Other.Chr(13));
spBar_B.DiscardInBuffer();
sReceive = sReceive.Trim();
this.Invoke((EventHandler)(delegate
{
updateMessage(lstMessage, "BarB->PC:" + sReceive);
saveLog(p.LogType.SysLog, "BarB->PC:" + sReceive);
updateMessage(lstMessage, "BarB:" + sReceive);
saveLog(p.LogType.SysLog, "BarB:" + sReceive);
updateMessage(lstBar, "BarB:" + sReceive);
p.BarB = sReceive.Trim().ToUpper();
txtBarB.Text = p.BarB;
saveLog(p.LogType.SNLog, "BarB:" + p.BarB);
//check A,B,C,D
if (_runing)
{
if (CheckAllBarComplete())
{
sendData(spPLC, "B");
updateMessage(lstMessage, "PC->PLC:B");
saveLog(p.LogType.SysLog, "PC->PLC:B");
}
else
{
}
}
}));
}
catch (Exception)
{
//throw;
}
}
/// <summary>
/// 打开条码枪串口，并保存log
/// </summary>
/// <param name="sp">串口控件</param>
/// <param name="str2">log前缀，如”PC->BarA:"</param>
private void closeScanner(SerialPort sp, string str2)
{
//sp.PortName = portname;
if (p.Send_Command_Use_Hex)
{
sendHex(sp, p.Close_Scan_Command);
}
else
{
if (p.Close_Add_Enter)
{
sendData(sp, p.Close_Scan_Command + Other.Chr(13));
}
else
{
sendData(sp, p.Close_Scan_Command);
}
}
updateMessage(lstMessage, str2 + p.Close_Scan_Command);
saveLog(p.LogType.SysLog, str2 + p.Close_Scan_Command);
closeSerialPort(sp);
}
/// <summary>
/// 打开条码枪串口，并保存log
/// </summary>
/// <param name="portname">串口号</param>
/// <param name="sp">串口控件</param>
/// <param name="str2">log前缀，如”PC->BarA:"</param>
private void openScanner(SerialPort sp, string portname, string str2)
{
openSerialPort(sp, portname);
if (p.Send_Command_Use_Hex)
{
sendHex(sp, p.Open_Scan_Command);
}
else
{
if (p.Open_Add_Enter)
{
sendData(sp, p.Open_Scan_Command + Other.Chr(13));
}
else
{
sendData(sp, p.Open_Scan_Command);
}
}
updateMessage(lstMessage, str2 + p.Open_Scan_Command);
saveLog(p.LogType.SysLog, str2 + p.Open_Scan_Command);
}
private void spPLC_DataReceived(object sender, SerialDataReceivedEventArgs e)
{
if (spPLC.BytesToRead == 0)
{
return;
}
try
{
string sReceive = spPLC.ReadExisting();
spPLC.DiscardInBuffer();
sReceive = sReceive.Trim();
this.Invoke((EventHandler)(delegate
{
updateMessage(lstMessage, "PLC->PC:" + sReceive);
saveLog(p.LogType.SysLog, "PLC->PC:" + sReceive);
if (sReceive == "A")
{
updateMessage(lstMessage, "PLC ready OK,start to open sanner to read barcode...");
saveLog(p.LogType.SysLog, "PLC ready OK,start to open sanner to read barcode...");
txtBarA.Text = string.Empty;
txtBarB.Text = string.Empty;
txtBarC.Text = string.Empty;
txtBarD.Text = string.Empty;
p.BarA = string.Empty;
p.BarB = string.Empty;
p.BarC = string.Empty;
p.BarD = string.Empty;
updateMessage(lstMessage, "Open Scanner & start timeout counting...");
saveLog(p.LogType.SysLog, "Open Scanner & start timeout counting...");
if (p.Send_Command_Use_Hex)
{
sendHex(spBar_A, p.Open_Scan_Command);
sendHex(spBar_B, p.Open_Scan_Command);
sendHex(spBar_C, p.Open_Scan_Command);
sendHex(spBar_D, p.Open_Scan_Command);
}
else
{
if (p.Open_Add_Enter)
{
sendData(spBar_A, p.Open_Scan_Command + Other.Chr(13));
sendData(spBar_B, p.Open_Scan_Command + Other.Chr(13));
sendData(spBar_C, p.Open_Scan_Command + Other.Chr(13));
sendData(spBar_D, p.Open_Scan_Command + Other.Chr(13));
}
else
{
sendData(spBar_A, p.Open_Scan_Command);
sendData(spBar_B, p.Open_Scan_Command);
sendData(spBar_C, p.Open_Scan_Command);
sendData(spBar_D, p.Open_Scan_Command);
}
}
updateMessage(lstMessage, "PC->BarA:" + p.Open_Scan_Command);
updateMessage(lstMessage, "PC->BarB:" + p.Open_Scan_Command);
updateMessage(lstMessage, "PC->BarC:" + p.Open_Scan_Command);
updateMessage(lstMessage, "PC->BarD:" + p.Open_Scan_Command);
saveLog(p.LogType.SysLog, "PC->BarA:" + p.Open_Scan_Command);
saveLog(p.LogType.SysLog, "PC->BarB:" + p.Open_Scan_Command);
saveLog(p.LogType.SysLog, "PC->BarC:" + p.Open_Scan_Command);
saveLog(p.LogType.SysLog, "PC->BarD:" + p.Open_Scan_Command);
timerScanTimeout.Enabled = true;
timerScanTimeout.Start();
}
}));
}
catch (Exception)
{
// throw;
}
}