public void ConnectToPlc()
{
string[] ipArray;
byte[] values;
deviceDriver = new OmronFinsNet(_device.Ip, _device.Port)
{
ConnectTimeOut = 2000
};
ipArray = _device.Ip.Split('.');
values = System.BitConverter.GetBytes(int.Parse(ipArray[ipArray.Length - 1]));
deviceDriver.SA1 = values[0]; // PC网络号，PC的IP地址的最后一个数.假如你的电脑的Ip地址为192.168.0.13，那么这个值就是13
ipArray = _device.Ip.Split('.');
values = System.BitConverter.GetBytes(int.Parse(ipArray[ipArray.Length - 1]));
deviceDriver.DA1 = values[0]; // 0x10 PLC网络号，PLC的IP地址的最后一个数.假如你的PLC的Ip地址为192.168.0.10，那么这个值就是10
//omronTcpNet.SA1 = 0x12; // PC网络号，PC的IP地址的最后一个数
//omronTcpNet.DA1 = 0x10; // PLC网络号，PLC的IP地址的最后一个数
deviceDriver.DA2 = 0x00; // PLC单元号，通常为0
deviceDriver.ConnectServer();
deviceDriver.SetPersistentConnection(); // 设置长连接
OperateResult res = deviceDriver.ConnectServer();
if (res.IsSuccess)
{
_log.WriteLog($"{_device.Name}{_device.Ip}连接成功");
}
else
{
_log.WriteLog($"{_device.Name}{_device.Ip}连接失败");
}
_device.IsConnected = res.IsSuccess;
}
public Result Connect(Commor commor)
{
var omronFinsNet = new OmronFinsNet();
var ethernetCommor = (EthernetCommor)commor.Communicator;
try
{
omronFinsNet.ConnectTimeOut = 2000;
omronFinsNet.IpAddress = ethernetCommor.IP;
omronFinsNet.Port = ethernetCommor.Port;
omronFinsNet.SA1 = NetHelper.GetIpLastValue(NetHelper.GetLocalIpByRegex("192.168.1.*"));;
omronFinsNet.DA2 = 0;
omronFinsNet.ByteTransform.DataFormat = (HslCommunication.Core.DataFormat)Enum.Parse(typeof(HslCommunication.Core.DataFormat), "CDAB");
OperateResult connect = omronFinsNet.ConnectServer();
if (connect.IsSuccess)
{
commor.Connector = omronFinsNet;
return(Result.Success);
}
else
{
return(new Result(string.Format("连接{0}失败({1} ：{2})", ethernetCommor.Name, ethernetCommor.IP, ethernetCommor.Port)));
}
}
catch (Exception ex)
{
return(new Result(ex.Message));
}
}
public bool Connect(out string msg)
{
msg = "";
if (!Net.IsPingSuccess(this.IP))
{
msg = "无法连接到 " + this.IP;
return(false);
}
if (omron_net == null)
{
omron_net = new OmronFinsNet(this.IP, this.Port);
var ips = this.IP.Split('.');
omron_net.SA1 = Net.GetIpLastValue(Net.GetLocalIpByRegex(string.Format("{0}.{1}.{2}.*", ips[0], ips[1], ips[2]))); // PC网络号，PC的IP地址的最后一个数
omron_net.DA1 = Net.GetIpLastValue(this.IP); // PLC网络号，PLC的IP地址的最后一个数0
omron_net.DA2 = 0x00; // PLC单元号，通常为0
omron_net.ReceiveTimeOut = 1000;
omron_net.ConnectTimeOut = 1000;
OperateResult result = omron_net.ConnectServer();
System.Diagnostics.Debug.WriteLine("连接欧姆龙 ：" + result.IsSuccess);
if (!result.IsSuccess)
{
msg = result.Message;
this.IsConnected = false;
return(false);
}
}
this.IsConnected = true;
return(true);
}
private void button1_Click(object sender, EventArgs e)
{
// 连接
if (!System.Net.IPAddress.TryParse(textBox1.Text, out System.Net.IPAddress address))
{
MessageBox.Show(DemoUtils.IpAddressInputWrong);
return;
}
if (!int.TryParse(textBox2.Text, out int port))
{
MessageBox.Show(DemoUtils.PortInputWrong);
return;
}
if (!byte.TryParse(textBox15.Text, out byte SA1))
{
MessageBox.Show("SA1 Input Wrong！");
return;
}
if (!byte.TryParse(textBox16.Text, out byte DA2))
{
MessageBox.Show("PLC DA2 input wrong！");
return;
}
if (!byte.TryParse(textBox17.Text, out byte DA1))
{
MessageBox.Show("PLC DA1 input wrong！");
return;
}
omronFinsNet.IpAddress = textBox1.Text;
omronFinsNet.Port = port;
omronFinsNet.SA1 = SA1;
omronFinsNet.DA1 = DA1;
omronFinsNet.DA2 = DA2;
omronFinsNet.ByteTransform.DataFormat = (HslCommunication.Core.DataFormat)comboBox1.SelectedItem;
// OperateResult connect = OperateResult.CreateSuccessResult( );
OperateResult connect = omronFinsNet.ConnectServer( );
if (connect.IsSuccess)
{
MessageBox.Show(HslCommunication.StringResources.Language.ConnectedSuccess);
button2.Enabled = true;
button1.Enabled = false;
panel2.Enabled = true;
userControlCurve1.ReadWriteNet = omronFinsNet;
}
else
{
MessageBox.Show(HslCommunication.StringResources.Language.ConnectedFailed);
}
}
/// <summary>
/// 连接PLC
/// </summary>
public bool openConnectPLC()
{
OperateResult connect = omronFinsNet.ConnectServer();
if (connect.IsSuccess)
{
return(true);
}
else
{
return(false);
}
}
private void button1_Click(object sender, EventArgs e)
{
// 连接
if (!System.Net.IPAddress.TryParse(textBox1.Text, out System.Net.IPAddress address))
{
MessageBox.Show("Ip地址输入不正确！");
return;
}
if (!int.TryParse(textBox2.Text, out int port))
{
MessageBox.Show("端口号输入不正确！");
return;
}
if (!byte.TryParse(textBox15.Text, out byte SA1))
{
MessageBox.Show("本机网络号输入不正确！");
return;
}
omronFinsNet.IpAddress = textBox1.Text;
omronFinsNet.Port = port;
omronFinsNet.SA1 = SA1;
try
{
OperateResult connect = omronFinsNet.ConnectServer( );
if (connect.IsSuccess)
{
MessageBox.Show("连接成功！");
button2.Enabled = true;
button1.Enabled = false;
panel2.Enabled = true;
}
else
{
MessageBox.Show("连接失败！");
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
public bool Connect()
{
if (omr != null)
{
omr.ConnectClose();
omr = null;
}
omr = new OmronFinsNet(Properties.Settings.Default.PLC_IP, Properties.Settings.Default.PLC_PORT)
{
SA1 = 0,
DA1 = 0
};
Task.Factory.StartNew(() =>
{
while (true)
{
var op = omr.ConnectServer();
IsConnected = op.IsSuccess;
if (!op.IsSuccess)
{
Events.Publish(new MsgItem {
Time = DateTime.Now, Level = "E", Value = op.Message
});
}
if (IsConnected)
{
foreach (var v in AM.alarms)
{
var b = omr.ReadBool(v.Address);
if (b.IsSuccess)
{
if (v.Value != b.Content)
{
v.Value = b.Content;
Events.Publish(v);
}
}
}
omr.ConnectClose();
}
System.Threading.Thread.Sleep(10);
}
});
return(IsConnected);
}
public override void DeviceConn(OmronFinsNetConfig config)
{
OmronFinsNet omronFinsNet = new OmronFinsNet();
omronFinsNet.ConnectTimeOut = config.ConnectTimeOut;
omronFinsNet.IpAddress = config.IP;
omronFinsNet.Port = config.Port;
omronFinsNet.SA1 = config.SA1;
omronFinsNet.SA2 = config.SA2;
omronFinsNet.ByteTransform.DataFormat = (HslCommunication.Core.DataFormat)config.ByteTransformDataFormat;
omronFinsNet.IsChangeSA1AfterReadFailed = config.IsChangeSA1AfterReadFailed;
OperateResult connect = omronFinsNet.ConnectServer();
NetworkDevice = omronFinsNet;
if (!connect.IsSuccess)
{
throw new Exception("Connect Failed");
}
}
public bool OpenPLC(string IPAddress, Byte sa1, Byte da1, Byte da2)
{
try
{
_OmronFinsNet = new OmronFinsNet(IPAddress, 9600);
_OmronFinsNet.SA1 = sa1;
_OmronFinsNet.DA1 = da1;
_OmronFinsNet.DA2 = da2;
//_OmronFinsNet.ConnectTimeOut = 5000;
//_SiementsTcpNet.Port = 102;
OperateResult result = _OmronFinsNet.ConnectServer();
//MessageBox.Show((result.IsSuccess).ToString());
if (result.IsSuccess)
{
//AtuoRun = true;
//MessageBox.Show("连接PLC成功");
//NetLog.WriteTextLog("连接PLC成功");
PLCIsopen = result.IsSuccess;
return(true);
}
else
{
//MessageBox.Show("连接PLC失败");
//NetLog.WriteTextLog("连接PLC失败");
PLCIsopen = result.IsSuccess;
return(false);
}
}
catch (Exception ex)
{
PLCIsopen = false;
//MessageBox.Show(ex.Message);
//NetLog.WriteTextLog("连接PLC错误"+ex.Message);
return(false);
}
}
protected override bool Connect()
{
try
{
// PLC.ConnectTimeOut = 1000;
OperateResult opres = PLC.ConnectServer();
if (opres.IsSuccess)
{
LOG.Info($"Connect to OmronDataSource [{SourceName}] success.");
}
else
{
LOG.Warn($"Connect to OmronDataSource [{SourceName}] failed.");
}
return(opres.IsSuccess);
}
catch (Exception ex)
{
LOG.Error($"Connect to [{SourceName}] failed. Message [{ex.Message}]");
return(false);
}
}
public MainWindow()
{
InitializeComponent();
#region 启动时串口最大化显示
this.WindowState = WindowState.Maximized;
Rect rc = SystemParameters.WorkArea; //获取工作区大小
//this.Topmost = true;
this.Left = 0; //设置位置
this.Top = 0;
this.Width = rc.Width;
this.Height = rc.Height;
#endregion
LoadJsonData();
Init();
//plc = new SiemensS7Net(SiemensPLCS.S1200, config.IpAddress)
//{
// ConnectTimeOut = 5000
//};
plc = new OmronFinsNet(config.IpAddress, config.IpPort)
{
SA1 = 10,
ConnectTimeOut = 5000
};
connect = plc.ConnectServer();
#region PLC连接定时器
//timer = new System.Windows.Threading.DispatcherTimer();
//timer.Tick += new EventHandler(ThreadCheck);
//timer.Interval = new TimeSpan(0, 0, 0, 5);
//timer.Start();
#endregion
}
private void button1_Click(object sender, EventArgs e)
{
if (!int.TryParse(textBox2.Text, out int port))
{
MessageBox.Show(DemoUtils.PortInputWrong);
return;
}
if (!byte.TryParse(textBox16.Text, out byte DA2))
{
MessageBox.Show("PLC DA2 input wrong！");
return;
}
omronFinsNet.IpAddress = textBox1.Text;
omronFinsNet.Port = port;
omronFinsNet.DA2 = DA2;
omronFinsNet.ByteTransform.DataFormat = (HslCommunication.Core.DataFormat)comboBox1.SelectedItem;
OperateResult connect = omronFinsNet.ConnectServer( );
if (connect.IsSuccess)
{
MessageBox.Show(StringResources.Language.ConnectedSuccess);
button2.Enabled = true;
button1.Enabled = false;
panel2.Enabled = true;
textBox15.Text = omronFinsNet.SA1.ToString( );
textBox3.Text = omronFinsNet.DA1.ToString( );
userControlReadWriteOp1.SetReadWriteNet(omronFinsNet, "D100", true);
}
else
{
MessageBox.Show(StringResources.Language.ConnectedFailed + " " + connect.ToMessageShowString( ));
}
}
public void ClassTest2( )
{
#region Usage2
// 实例化对象，指定PLC的ip地址和端口号
OmronFinsNet omronFinsNet = new OmronFinsNet("192.168.1.110", 6000);
omronFinsNet.SA1 = 10;
omronFinsNet.DA1 = 110;
// 连接对象
OperateResult connect = omronFinsNet.ConnectServer( );
if (!connect.IsSuccess)
{
Console.WriteLine("connect failed:" + connect.Message);
return;
}
// 举例读取D100的值
short D100 = omronFinsNet.ReadInt16("D100").Content;
omronFinsNet.ConnectClose( );
#endregion
}
private void button1_Click(object sender, EventArgs e)
{
// 连接
if (!System.Net.IPAddress.TryParse(textBox1.Text, out System.Net.IPAddress address))
{
MessageBox.Show("Ip地址输入不正确！");
return;
}
if (!int.TryParse(textBox2.Text, out int port))
{
MessageBox.Show("端口号输入不正确！");
return;
}
if (!byte.TryParse(textBox15.Text, out byte SA1))
{
MessageBox.Show("本机网络号输入不正确！");
return;
}
if (!byte.TryParse(textBox16.Text, out byte DA2))
{
MessageBox.Show("PLC的单元号输入不正确！");
return;
}
if (!byte.TryParse(textBox17.Text, out byte DA1))
{
MessageBox.Show("PLC的节点号输入不正确！");
return;
}
omronFinsNet.IpAddress = textBox1.Text;
omronFinsNet.Port = port;
omronFinsNet.SA1 = SA1;
omronFinsNet.DA1 = DA1;
omronFinsNet.DA2 = DA2;
omronFinsNet.ByteTransform.DataFormat = HslCommunication.Core.DataFormat.ABCD;
try
{
// OperateResult connect = OperateResult.CreateSuccessResult( );
OperateResult connect = omronFinsNet.ConnectServer( );
if (connect.IsSuccess)
{
MessageBox.Show("连接成功！");
button2.Enabled = true;
button1.Enabled = false;
panel2.Enabled = true;
}
else
{
MessageBox.Show("连接失败！");
}
}
catch (Exception ex)
{
MessageBox.Show(ex.Message);
}
}
