// Token: 0x06000007 RID: 7 RVA: 0x00002564 File Offset: 0x00000764
private static string GetFormatNodeName(FileFormat format)
{
string result;
switch (format)
{
case FileFormat.Unitechnik52:
result = "Unitechnik52";
break;
case FileFormat.Unitechnik60:
result = "Unitechnik60";
break;
case FileFormat.PXML13:
result = "PXML";
break;
default:
ItDebug.assert(false, "New CAM-Formats must define in which config node their Project Data will be found.");
result = null;
break;
}
return(result);
}
// Token: 0x060001E7 RID: 487 RVA: 0x0000D70C File Offset: 0x0000B90C
protected override void SetReinforcementTypeForWall(int layerIndexInZDir)
{
bool flag = base.IsLowerReinfInWall();
if (flag)
{
base.CNCReinfType = SteelGroupElement.CNCReinforcementType.Other;
}
else
{
bool flag2 = base.IsUpperReinfInWall();
if (flag2)
{
base.CNCReinfType = SteelGroupElement.CNCReinforcementType.UpperOther;
}
else
{
bool flag3 = base.Data.LayerPosition == PosReinfLayer.Center;
if (flag3)
{
ItDebug.assert(false, "Reinforcement in center position. Autodesk must make a decision how this should be handled. For now, geometrically added to lower or upper reinforcement.");
base.SetReinforcementTypeFromZ();
}
else
{
base.SetReinforcementTypeFromZ();
}
}
}
}
// Token: 0x0600011A RID: 282 RVA: 0x00009C94 File Offset: 0x00007E94
public static void WriteThicknesses(int totalThickness, int productionThickness)
{
ItDebug.assert(totalThickness.Ge(0), "total thickness can not be negative");
ItDebug.assert(productionThickness.Ge(0), "production thickness can not be negative");
ItDebug.assert(productionThickness.Ge(totalThickness), "production thickness can not be smaller than total thickness");
ItUniWrapperImpl.setThicknesses(totalThickness, productionThickness);
}
// Token: 0x0600056C RID: 1388 RVA: 0x000156F8 File Offset: 0x000138F8
public DbwElementData(ItGeMatrix3d matWcsToPalette, RevitElement <Part> firstShell, RevitElement <Part> secondShell)
{
ItDebug.assert(matWcsToPalette != null && firstShell != null && secondShell != null, "Failure in: ");
this.MatWcsToPalette = matWcsToPalette;
this.FirstShell = new ItMachineDataWallDB.DbwElementData.Shell(ItMachineDataWallDB.DoubleWallMode.FirstShell, firstShell);
this.SecondShell = new ItMachineDataWallDB.DbwElementData.Shell(ItMachineDataWallDB.DoubleWallMode.SecondShell, secondShell);
}
// Token: 0x060001A4 RID: 420 RVA: 0x0000B97C File Offset: 0x00009B7C
private void SetReinforcementTypeFromWall()
{
bool flag = base.IsLowerReinfInWall();
if (flag)
{
this.SetReinforcementTypeFromPosition(PosReinfLayer.Bottom, SteelGroupElement.CNCReinforcementType.FirstRebarLayer, SteelGroupElement.CNCReinforcementType.SecondRebarLayer);
}
else
{
bool flag2 = base.IsUpperReinfInWall();
if (flag2)
{
this.SetReinforcementTypeFromPosition(PosReinfLayer.Top, SteelGroupElement.CNCReinforcementType.UpperFirstRebarLayer, SteelGroupElement.CNCReinforcementType.UpperSecondRebarLayer);
}
else
{
bool flag3 = base.Data.LayerPosition == PosReinfLayer.Center;
if (flag3)
{
ItDebug.assert(false, "Reinforcement in center position. Autodesk must make a decision how this should be handled. For now, geometrically added to lower or upper reinforcement.");
this.SetReinforcementTypeFromZ();
}
else
{
this.SetReinforcementTypeFromZ();
}
}
}
}
// Token: 0x06000219 RID: 537 RVA: 0x0000EB58 File Offset: 0x0000CD58
private void GetAdditionalSegment(ItBar xmlBar, ItSegment prevSegment, out ItSegment additionalSegment, ItGeVector3d startDirection, ref bool flipFutureYs)
{
additionalSegment = null;
bool flag = startDirection.isCodirectionalTo(prevSegment.XVector, null);
if (!flag)
{
double num;
double num2;
this.GetRotationsInDegree(xmlBar.CurrentNormal, prevSegment, startDirection, ref flipFutureYs, out num, out num2);
this.SetCurrentNormal(xmlBar, num, 0.0, prevSegment);
ItGeVector3d itGeVector3d;
ItGeVector3d yAxis;
ItGeVector3d zAxis;
this.GetNewDirections(num, num2, prevSegment, out itGeVector3d, out yAxis, out zAxis);
ItDebug.assert(itGeVector3d.isCodirectionalTo(startDirection, null), "Failure in: ");
double l = 0.0;
double r = 0.0;
num = Math.Round(num, 10);
num2 = Math.Round(num2, 10);
ItGeMatrix3d kIdentity = ItGeMatrix3d.kIdentity;
kIdentity.setCoordSystem(ItGePoint3d.kOrigin, startDirection, yAxis, zAxis);
additionalSegment = new ItSegment(l, r, num, num2, kIdentity, "normal");
}
}
// Token: 0x06000114 RID: 276 RVA: 0x00009B98 File Offset: 0x00007D98
internal static void AddCutout(ItUniWrapperImpl.CutoutData data, IEnumerable <ItUniWrapperImpl.Point2D> points)
{
ItDebug.assert(points.any <ItUniWrapperImpl.Point2D>(), "Can not handle empty List of Points");
ItUniWrapperImpl.Point2D[] array = points.ToArray <ItUniWrapperImpl.Point2D>();
data.countOfPoints = (ushort)array.Length;
ItUniWrapperImpl.addCutout(data, array);
}
// Token: 0x06000113 RID: 275 RVA: 0x00009B5C File Offset: 0x00007D5C
internal static void AddFreeFormRodstock(ItUniWrapperImpl.RodstockData data, IEnumerable <ItUniWrapperImpl.FreeFormSegment> segments)
{
ItDebug.assert(segments.any <ItUniWrapperImpl.FreeFormSegment>(), "Can not handle empty List of FreeFormSegments");
ItUniWrapperImpl.FreeFormSegment[] array = segments.ToArray <ItUniWrapperImpl.FreeFormSegment>();
data.numberOfFreeFormSegments = (ushort)array.Length;
ItUniWrapperImpl.addFreeFormRodstock(data, array);
}
// Token: 0x06000115 RID: 277 RVA: 0x00009BD4 File Offset: 0x00007DD4
internal static void AddContour(List <ItUniWrapperImpl.Point2D> points)
{
ItDebug.assert(points.any <ItUniWrapperImpl.Point2D>(), "Can not handle empty List of Points");
ItUniWrapperImpl.Point2D[] array = points.ToArray();
int countOfPoints = array.Length;
ItUniWrapperImpl.addContour(countOfPoints, array);
}
// Token: 0x0600010D RID: 269 RVA: 0x00009714 File Offset: 0x00007914
internal static int EndDocument(string strFilename)
{
ItDebug.assert(!string.IsNullOrWhiteSpace(strFilename), "Failure in: ");
bool flag = string.IsNullOrWhiteSpace(strFilename);
if (flag)
{
throw new ArgumentException();
}
return(ItUniWrapperImpl.endDocument(strFilename));
}
// Token: 0x0600020A RID: 522 RVA: 0x0000E160 File Offset: 0x0000C360
private ItSegment GetFirstSegFromCircArc(ItBar xmlBar, ItGeCircArc3d firstCirc, ItGeVector3d xzPlaneNormal, ref bool flipFutureYs, out ItSegment additionalSegment)
{
ItGeLine3d itGeLine3d;
firstCirc.tangent(firstCirc.startPoint(), out itGeLine3d, null);
ItGeVector3d itGeVector3d = itGeLine3d.direction().negate();
ItSegment startSegment = this.GetStartSegment(xmlBar);
double num;
double num2;
this.GetRotationsInDegree(xzPlaneNormal, startSegment, itGeVector3d, ref flipFutureYs, out num, out num2);
ItGeVector3d itGeVector3d2;
ItGeVector3d yAxis;
ItGeVector3d zAxis;
this.GetNewDirections(num, num2, startSegment, out itGeVector3d2, out yAxis, out zAxis);
this.SetCurrentNormal(xmlBar, num, num2, startSegment);
ItDebug.assert(itGeVector3d2.isCodirectionalTo(itGeVector3d, null), "Failure in: ");
double l = 0.0;
double r = 0.0;
double rotX = Math.Round(num, 10);
double bendY = Math.Round(num2, 10);
ItGeMatrix3d kIdentity = ItGeMatrix3d.kIdentity;
kIdentity.setCoordSystem(ItGePoint3d.kOrigin, itGeVector3d, yAxis, zAxis);
additionalSegment = new ItSegment(l, r, rotX, bendY, kIdentity, "normal");
double circleSign = this.GetCircleSign(xmlBar, firstCirc);
double num3;
double num4;
this.GetRotationsInDegree(xzPlaneNormal, additionalSegment, itGeVector3d, ref flipFutureYs, out num3, out num4);
ItGeVector3d itGeVector3d3;
ItGeVector3d itGeVector3d4;
ItGeVector3d itGeVector3d5;
this.GetNewDirections(num3, 0.0, startSegment, out itGeVector3d3, out itGeVector3d4, out itGeVector3d5);
this.SetCurrentNormal(xmlBar, num3, 0.0, additionalSegment);
double num5 = this.GetCentralAngleWithSign(firstCirc, circleSign);
num5 = ItAngle.toDegree(num5);
ItGeLine3d itGeLine3d2;
firstCirc.tangent(firstCirc.startPoint(), out itGeLine3d2, null);
ItGeVector3d itGeVector3d6 = itGeLine3d2.direction();
ItGeVector3d zAxis2 = itGeVector3d6.crossProduct(xzPlaneNormal);
double l2 = 0.0;
double r2 = firstCirc.radius();
double rotX2 = Math.Round(num3, 10);
double bendY2 = Math.Round(num5, 10);
kIdentity = ItGeMatrix3d.kIdentity;
kIdentity.setCoordSystem(ItGePoint3d.kOrigin, itGeVector3d6, xzPlaneNormal, zAxis2);
return(new ItSegment(l2, r2, rotX2, bendY2, kIdentity, "normal"));
}
// Token: 0x06000112 RID: 274 RVA: 0x00009B24 File Offset: 0x00007D24
internal static int AddStandardFabricSheet(int type, int count, double weightKg, string sheetName)
{
ItDebug.assert(sheetName != null, "cant handle null as sheetname");
bool flag = sheetName == null;
if (flag)
{
throw new ArgumentException();
}
return(ItUniWrapperImpl.addStandardFabricSheet(type, count, weightKg, sheetName));
}
// Token: 0x06000270 RID: 624 RVA: 0x0000FE94 File Offset: 0x0000E094
public void sendToUniwrapper()
{
ItDebug.assert(this.status == WireItem.Status.RelativeToSteelmat, "Can't write wire items before their coordinates are transformed to be relative to steelmats origin");
int diameter = CNCDataBase.convertToMM(this.WireDiameter);
int length = CNCDataBase.convertToMM(this.Length);
int[] startpoint = CNCDataBase.toPointArray(this.StartPoint);
int pitch = CNCDataBase.convertToMM((double)this.Pitch);
int spacerStartpoint = CNCDataBase.convertToMM((double)this.SpacerStartPoint);
int spacerPitch = CNCDataBase.convertToMM((double)this.SpacerPitch);
ItUniWrapperImpl.AddCFSRodstock(this.ReinforcementType, this.SteelQuality, this.NumberOfIrons, diameter, length, startpoint, pitch, this.Angle, this.ArticleNumber, this.AutomaticProduction, this.SpacerType, spacerStartpoint, spacerPitch, this.AdditionalStore);
}
// Token: 0x06000074 RID: 116 RVA: 0x00005500 File Offset: 0x00003700
private static void DetermineCombinedBoundingBox(ItMachineDataWallDB.DbwElementData data)
{
ItDebug.assert(data != null, "Failure in: ");
data.FirstShell.BoxOnPalette = data.FirstShell.Part.getWorldExtents(false).GetTransformed(data.MatWcsToPalette);
data.SecondShell.BoxOnPalette = data.SecondShell.Part.getWorldExtents(false).GetTransformed(data.MatWcsToPalette);
ItGeBoundBlock3d boxOnPalette = data.FirstShell.BoxOnPalette;
ItDebug.assert(boxOnPalette != null && data.SecondShell.BoxOnPalette != null, "Failure in: ");
boxOnPalette.extend(data.SecondShell.BoxOnPalette.minPoint);
boxOnPalette.extend(data.SecondShell.BoxOnPalette.maxPoint);
data.BoxOnPalette = boxOnPalette;
}
// Token: 0x060001D8 RID: 472 RVA: 0x0000CA88 File Offset: 0x0000AC88
private void UnitechnikWriteRebarAsFreeForm()
{
ItDebug.assert(base.IronSetsSchematic.any <List <ItGeCurve3d> >() && base.IronSetsSchematic[0].Count > 1, "Do not call this method for anything but bending forms.");
ItUniWrapperImpl.RodstockData data = default(ItUniWrapperImpl.RodstockData);
List <ItGeCurve3d> list = base.IronSetsSchematic[0];
ItGeVector3d normal;
short unitechnikAngleOfFreeForm = base.GetUnitechnikAngleOfFreeForm(list[0], out normal);
int num;
double dValue;
this.GetSpacingAndCountForUnitechnik(unitechnikAngleOfFreeForm, out num, out dValue);
int freeFormLength = SteelGroupElementRebar.GetFreeFormLength(list);
ItGePoint3d startPoint = base.GetStartPoint(base.IronSetsSchematic);
data.length = (uint)freeFormLength;
data.startAngle = unitechnikAngleOfFreeForm;
data.artNr = string.Empty;
data.autoProd = 0;
data.diameter = (ushort)CNCDataBase.convertToMM(base.RebarBarType.BarDiameter);
data.flexFormNumber = 0;
data.formType = 2;
data.hasSpacers = 0;
data.hasWielding = 0;
data.installationHeight = (uint)CNCDataBase.convertToMM(startPoint.z);
data.number = (ushort)num;
data.pitch = CNCDataBase.convertToMM(dValue);
data.pitchSpacer = 0u;
data.startingPointSpacer = 0u;
data.reinfType = (byte)base.CNCReinfTypeValue;
data.steelQuality = SteelGroupElementRebarBase.GetSteelQuality(base.RebarBarType);
data.xcoord = CNCDataBase.convertToMM(startPoint.x);
data.ycoord = CNCDataBase.convertToMM(startPoint.y);
List <ItUniWrapperImpl.FreeFormSegment> list2 = new List <ItUniWrapperImpl.FreeFormSegment>();
int num2;
for (int i = 0; i < list.Count; i = num2 + 1)
{
ItGeCurve3d itGeCurve3d = list[i];
ItGeCurve3d nextCurve = list.ElementAtOrDefault(i + 1);
short unitechnikAngleOfNextSegment = this.GetUnitechnikAngleOfNextSegment(itGeCurve3d, nextCurve, normal);
list2.Add(new ItUniWrapperImpl.FreeFormSegment
{
length = (uint)CNCDataBase.convertToMM(itGeCurve3d.len),
angle = unitechnikAngleOfNextSegment
});
num2 = i;
}
ItUniWrapperImpl.AddFreeFormRodstock(data, list2);
}
// Token: 0x06000110 RID: 272 RVA: 0x00009848 File Offset: 0x00007A48
internal static int AddSteelmat(string matName, int maxLen, int maxWidth, int toTurn, int stopOnTurn, int matType, int[] pos)
{
ItDebug.assert(matName != null, "cant handle null as steelmat name");
ItDebug.assert(maxLen > 0 && maxWidth > 0, "cant have negative length or width");
ItDebug.assert(toTurn == 0 || toTurn == 1, "toTurn must be 0 or 1");
ItDebug.assert(stopOnTurn == 0 || stopOnTurn == 1, "stopOnTurn must be 0 or 1");
ItDebug.assert((matType >= 0 && matType <= 4) || matType == 8, "invalid mattype");
ItDebug.assert(pos.Length == 3, "position must be a 3d-point");
bool flag = matName == null;
if (flag)
{
throw new ArgumentException();
}
bool flag2 = maxLen <= 0 || maxWidth <= 0;
if (flag2)
{
throw new ArgumentException();
}
bool flag3 = toTurn != 0 && toTurn != 1;
if (flag3)
{
throw new ArgumentException();
}
bool flag4 = stopOnTurn != 0 && stopOnTurn != 1;
if (flag4)
{
throw new ArgumentException();
}
bool flag5 = (matType < 0 || matType > 4) && matType != 8;
if (flag5)
{
throw new ArgumentException();
}
bool flag6 = pos.Length != 3;
if (flag6)
{
throw new ArgumentException();
}
matName = ((matName.Length > 20) ? matName.Substring(0, 20) : matName);
return(ItUniWrapperImpl.addSteelmat(matName, maxLen, maxWidth, toTurn, stopOnTurn, matType, pos));
}
// Token: 0x06000002 RID: 2 RVA: 0x00002158 File Offset: 0x00000358
private static CamIntExportStatus DetermineStatus(CmdResult cmdResult, bool bCancelCommand, bool eventCanceled)
{
CamIntExportStatus result;
if (eventCanceled)
{
result = CamIntExportStatus.EventCanceled;
}
else if (bCancelCommand)
{
result = CamIntExportStatus.UserCanceled;
}
else
{
bool flag = cmdResult == CmdResult.Cancelled;
if (flag)
{
result = CamIntExportStatus.UserCanceled;
}
else
{
bool flag2 = cmdResult == CmdResult.Succeeded;
if (flag2)
{
result = CamIntExportStatus.Success;
}
else
{
bool flag3 = cmdResult == CmdResult.Failed;
if (flag3)
{
result = CamIntExportStatus.Failed;
}
else
{
ItDebug.assert(false, "Unexpected result of cam export!");
result = CamIntExportStatus.None;
}
}
}
}
return(result);
}
// Token: 0x0600010C RID: 268 RVA: 0x00009668 File Offset: 0x00007868
internal static int StartDocument(int iProduct, int iElementId, ProjectCoordinates projectCoordinates, short iVersion, string strElemName, double dTotalArea, bool clearDocument)
{
ItDebug.assert(iProduct >= 0 && iProduct < 100, "product type must be between 0 and 99");
ItDebug.assert(iElementId >= 0 || iElementId < 999, "elementId must be between 0 and 999");
bool flag = iProduct < 0 || iProduct >= 100;
if (flag)
{
throw new ArgumentOutOfRangeException();
}
bool flag2 = iElementId < 0 && iElementId >= 999;
if (flag2)
{
throw new ArgumentOutOfRangeException();
}
strElemName = ((strElemName.Length > 30) ? strElemName.Substring(0, 30) : strElemName);
double[] array = projectCoordinates.getArray();
return(ItUniWrapperImpl.startOrder(iProduct, iElementId, array, iVersion, strElemName, dTotalArea, clearDocument));
}
// Token: 0x0600010F RID: 271 RVA: 0x000097CC File Offset: 0x000079CC
internal static int AddGirder(string girderName, int[] iParameter)
{
ItDebug.assert(girderName != null, "cant handle null as mountPartName");
ItDebug.assert(iParameter.Length % 4 == 2, "parameter array for mount parts must be array of pairs of 4 elements, plus two (the first two)");
bool flag = girderName == null;
if (flag)
{
throw new ArgumentException();
}
bool flag2 = iParameter.Length % 4 != 2;
if (flag2)
{
throw new ArgumentException();
}
girderName = ((girderName.Length > 10) ? girderName.Substring(0, 10) : girderName);
int iCount = iParameter.Length;
return(ItUniWrapperImpl.addSet(5, girderName, iCount, iParameter));
}
// Token: 0x06000044 RID: 68 RVA: 0x00003DE8 File Offset: 0x00001FE8
public void setParametersForUnitechnik(int[] iParameters, int count, double offset, double x, double y)
{
bool flag = iParameters.isNull() || iParameters.Length != 10;
if (flag)
{
ItDebug.assert(false, "Input parameter ");
}
else
{
ItBracedGirderData.DataInFeet cncdata = this.GetCNCData(count, offset);
iParameters[0] = cncdata.Count;
iParameters[1] = CNCDataBase.convertToMM(cncdata.Length);
iParameters[2] = CNCDataBase.convertToMM(x);
iParameters[3] = CNCDataBase.convertToMM(y);
iParameters[4] = CNCDataBase.convertToMM(cncdata.Offset);
iParameters[5] = (int)ItAngle.toDegree(cncdata.Angle);
iParameters[6] = CNCDataBase.convertToMM(cncdata.Height);
iParameters[7] = CNCDataBase.convertToMM(cncdata.Diameter);
iParameters[8] = (int)(cncdata.Weight * 1000.0);
iParameters[9] = CNCDataBase.convertToMM(cncdata.InstallationHeight);
}
}
// Token: 0x0600023B RID: 571 RVA: 0x0000F8A8 File Offset: 0x0000DAA8
private static IEnumerable <SteelGroupElementMeshSFS> AccumulateSheets(Dictionary <ElementId, List <SteelGroupElementMeshSFS> > dict)
{
Func <SteelGroupElementMeshSFS, SteelGroupElementMeshSFS, SteelGroupElementMeshSFS> sumSheets = delegate(SteelGroupElementMeshSFS total, SteelGroupElementMeshSFS next)
{
total.Count += next.Count;
total.Weight += next.Weight;
total.WireItemsMajor.AddRange(next.WireItemsMajor);
total.WireItemsMinor.AddRange(next.WireItemsMinor);
return(total);
};
Func <List <SteelGroupElementMeshSFS>, SteelGroupElementMeshSFS> selector = delegate(List <SteelGroupElementMeshSFS> list)
{
SteelGroupElementMeshSFS steelGroupElementMeshSFS = list.FirstOrDefault <SteelGroupElementMeshSFS>();
ItDebug.assert(steelGroupElementMeshSFS != null, "if a list is added to the dict, at least one sheet must be added to the list!");
SteelGroupElementMeshSFS instance = SteelGroupElementMeshSFS.GetInstance(steelGroupElementMeshSFS.FabricSheet, steelGroupElementMeshSFS.CNCElementData, steelGroupElementMeshSFS.MatWcsToPalette);
instance.Weight = 0.0;
instance.Count = 0;
instance.WireItemsMajor.Clear();
instance.WireItemsMinor.Clear();
return(list.Aggregate(instance, sumSheets));
};
return(dict.Values.Select(selector));
}
// Token: 0x06000271 RID: 625 RVA: 0x0000FF44 File Offset: 0x0000E144
public void writeToUnitechnik(TextWriter writer, int ironNumber)
{
ItDebug.assert(this.status == WireItem.Status.RelativeToSteelmat, "Can't write wire items before their coordinates are transformed to be relative to steelmats origin");
writer.Write(CNCDataBase.paddedInt3(ironNumber) + " ");
writer.Write("000 ");
writer.Write(CNCDataBase.paddedInt(this.ReinforcementType, 1, false) + " ");
writer.Write(this.SteelQuality + " ");
writer.Write(CNCDataBase.paddedInt(this.NumberOfIrons, 5, false) + " ");
writer.Write(CNCDataBase.toMMString3(this.WireDiameter) + " ");
writer.Write(CNCDataBase.toMMString5(this.Length, false) + " ");
writer.Write(CNCDataBase.toSignedMMString5(this.StartPoint.x) + " ");
writer.Write(CNCDataBase.toSignedMMString5(this.StartPoint.y) + " ");
writer.Write(CNCDataBase.toSignedMMString5((double)this.Pitch) + " ");
writer.Write(CNCDataBase.toMMString((double)this.Angle, 3, true) + " ");
writer.Write(CNCDataBase.padString(this.ArticleNumber, 10) + " ");
writer.Write(this.AutomaticProduction + writer.NewLine);
writer.Write(CNCDataBase.paddedInt3(this.SpacerType) + " ");
writer.Write("000 ");
writer.Write("000 ");
writer.Write(CNCDataBase.toMMString5((double)this.SpacerStartPoint, false) + " ");
writer.Write(CNCDataBase.toMMString5((double)this.SpacerPitch, false) + " ");
writer.Write(CNCDataBase.toMMString5(this.StartPoint.z, false) + " ");
writer.Write(this.AdditionalStore + writer.NewLine);
}
// Token: 0x06000111 RID: 273 RVA: 0x00009990 File Offset: 0x00007B90
internal static int AddCFSRodstock(int reinfType, string steelQuality, int numberOfIrons, int diameter, int length, int[] startpoint, int pitch, int angle, string articleNumber, int automaticProduction, int spacerType, int spacerStartpoint, int spacerPitch, int additionalStore)
{
ItDebug.assert(reinfType >= 0 && reinfType < 9, "invalid reinfType");
ItDebug.assert(steelQuality != null, "cant handle null as steel quality");
ItDebug.assert(numberOfIrons > 0, "cant handle 0 or negative iron number");
ItDebug.assert(diameter > 0, "cant handle 0 or negative diameter");
ItDebug.assert(length > 0, "cant handle 0 or negative iron length");
ItDebug.assert(startpoint.Length == 3, "Startpoint must be a 3d point");
ItDebug.assert(articleNumber != null, "cant handle null as article number");
ItDebug.assert(automaticProduction == 0 || automaticProduction == 1, "automaticProduction must be 0 or 1");
ItDebug.assert(additionalStore >= 0 && additionalStore <= 112, "additional store contains invalid flags");
bool flag = reinfType < 0 || reinfType >= 9;
if (flag)
{
throw new ArgumentException();
}
bool flag2 = steelQuality == null;
if (flag2)
{
throw new ArgumentException();
}
bool flag3 = numberOfIrons <= 0;
if (flag3)
{
throw new ArgumentException();
}
bool flag4 = diameter <= 0;
if (flag4)
{
throw new ArgumentException();
}
bool flag5 = length <= 0;
if (flag5)
{
throw new ArgumentException();
}
bool flag6 = startpoint.Length != 3;
if (flag6)
{
throw new ArgumentException();
}
bool flag7 = articleNumber == null;
if (flag7)
{
throw new ArgumentException();
}
bool flag8 = automaticProduction != 0 && automaticProduction != 1;
if (flag8)
{
throw new ArgumentException();
}
bool flag9 = additionalStore < 0 || additionalStore > 112;
if (flag9)
{
throw new ArgumentException();
}
return(ItUniWrapperImpl.addCFSRodstock(reinfType, steelQuality, numberOfIrons, diameter, length, startpoint, pitch, angle, articleNumber, automaticProduction, spacerType, spacerStartpoint, spacerPitch, additionalStore));
}
// Token: 0x06000118 RID: 280 RVA: 0x00009C4D File Offset: 0x00007E4D
internal static void SetProjectData(CNCProjectData data)
{
ItDebug.assert(data.CheckNoNullFields(), "no fields must be null in the CNCProjectData, use string.Empty instead");
ItUniWrapperImpl.setProjectData(data);
}
// Token: 0x060000DC RID: 220 RVA: 0x00009034 File Offset: 0x00007234
protected override double getAssemblyThickness(ItGeBoundBlock3d bb)
{
ItDebug.assert(bb.isNotNull(), "input parameter is null");
return(bb.maxPoint.z - bb.minPoint.z);
}
// Token: 0x060000EE RID: 238 RVA: 0x0000942C File Offset: 0x0000762C
public override double getThickness(ItGeBoundBlock3d bb)
{
ItDebug.assert(bb.isNotNull(), "input parameter is null");
return(bb.maxPoint.y - bb.minPoint.y);
}
// Token: 0x06000119 RID: 281 RVA: 0x00009C68 File Offset: 0x00007E68
public static void AddLayer(int layerType, double dThickness, double dUnitWeight, double dVolume, string sConcreteQuality)
{
ItDebug.assert(sConcreteQuality != null, "No strings should be null when being sent to UniWrapper");
sConcreteQuality = (sConcreteQuality ?? string.Empty);
ItUniWrapperImpl.addLayer(layerType, dThickness, dUnitWeight, dVolume, sConcreteQuality);
}
// Token: 0x06000042 RID: 66 RVA: 0x00003AB0 File Offset: 0x00001CB0
public ItBracedGirderData(RevitElement <FamilyInstance> famInst, ItGeMatrix3d matWcsToPalette, double minZOfPartOnPalette)
{
bool flag = famInst.IsInvalid() || famInst.Element.Symbol.isNull() || matWcsToPalette.isNull();
if (flag)
{
ItDebug.assert(false, "Constructor");
}
else
{
this.famInst = famInst;
LocationCurve locationCurve = famInst.isNotNull() ? (famInst.Element.Location as LocationCurve) : null;
bool flag2 = locationCurve.isNull() || locationCurve.Curve.isNull() || !locationCurve.Curve.IsBound || locationCurve.Curve.Length.Eq(0.0, -1.0);
if (flag2)
{
ItDebug.assert(false, "Location of the girder is not a Curve Type or other geometric inconsistency");
}
else
{
ItGeMatrix3d mat = matWcsToPalette * famInst.Element.ecs();
ItGeBoundBlock3d localExtents = famInst.Element.getLocalExtents();
ItGeBoundBlock3d itGeBoundBlock3d = localExtents.transformBy(mat);
localExtents.transformBy(mat);
this.installationHeight = itGeBoundBlock3d.minPoint.z - minZOfPartOnPalette;
this.height = itGeBoundBlock3d.maxPoint.z - itGeBoundBlock3d.minPoint.z;
XYZ point = locationCurve.Curve.Evaluate(0.0, true);
XYZ point2 = locationCurve.Curve.Evaluate(1.0, true);
this.midline = new ItGeLineSeg3d(point.asPoint(), point2.asPoint());
this.midline.transformBy(matWcsToPalette);
bool flag3 = this.midline.startPoint.x.Eq(this.midline.endPoint.x, -1.0);
if (flag3)
{
bool flag4 = this.midline.startPoint.y > this.midline.endPoint.y;
if (flag4)
{
this.midline.reverseParam();
}
}
else
{
bool flag5 = this.midline.startPoint.y.Eq(this.midline.endPoint.y, -1.0);
if (flag5)
{
bool flag6 = this.midline.startPoint.x > this.midline.endPoint.x;
if (flag6)
{
this.midline.reverseParam();
}
}
}
Parameter parameter = famInst.Element.Symbol.getParameter(ItBracedGirderData._lclParamHeight, true);
Parameter parameter2 = famInst.Element.Symbol.getParameter(ItBracedGirderData._lclParamLinealWeight, true);
Parameter parameter3 = famInst.Element.Symbol.getParameter(ItBracedGirderData._lclParamUpperChordDiam, true);
bool flag7 = parameter.isNotNull();
if (flag7)
{
this.height = parameter.AsDouble();
}
bool flag8 = parameter2.isNotNull();
if (flag8)
{
this.linealWeight = parameter2.AsDouble();
}
bool flag9 = parameter3.isNotNull();
if (flag9)
{
this.upperChordDiameter = parameter3.AsDouble();
}
}
}
}
