protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
Point3d base_pt;
var rc = RhinoGet.GetPoint("Start of line", false, out base_pt);
if (rc != Result.Success)
{
return(rc);
}
var gp = new GetPoint();
gp.SetCommandPrompt("End of line");
gp.SetBasePoint(base_pt, true);
gp.DrawLineFromPoint(base_pt, true);
gp.DynamicDraw += gp_DynamicDraw;
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var end_pt = gp.Point();
var vector = end_pt - base_pt;
if (vector.Length > doc.ModelAbsoluteTolerance)
{
var line = new Line(base_pt, end_pt);
doc.Objects.AddLine(line);
doc.Views.Redraw();
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
Point3d basePt;
Result rc = RhinoGet.GetPoint("Start of line", false, out basePt);
if (rc != Result.Success)
{
return(rc);
}
GetPoint gp = new GetPoint();
gp.SetCommandPrompt("End of line");
gp.SetBasePoint(basePt, true);
gp.DrawLineFromPoint(basePt, true);
gp.DynamicDraw += new EventHandler <GetPointDrawEventArgs>(gp_DynamicDraw);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
Point3d endPt = gp.Point();
Rhino.Geometry.Vector3d vector = endPt - basePt;
if (vector.Length > doc.ModelAbsoluteTolerance)
{
Line line = new Line(basePt, endPt);
doc.Objects.AddLine(line);
doc.Views.Redraw();
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var go = new GetObject();
go.SetCommandPrompt("Select grips to move");
go.GeometryFilter = ObjectType.Grip;
go.EnablePreSelect(true, true);
go.GetMultiple(1, 0);
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
var gp = new GetPoint();
gp.SetCommandPrompt("Point to move from");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var from = gp.Point();
gp.SetCommandPrompt("Point to move to");
gp.SetBasePoint(from, true);
gp.DrawLineFromPoint(from, true);
gp.Get();
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var to = gp.Point();
var dir = to - from;
if (dir.IsTiny(doc.ModelAbsoluteTolerance))
{
return(Result.Nothing);
}
var xform = Transform.Translation(dir);
var helper = new SampleCsGripHelper(doc);
helper.AddGripObjects(go);
helper.TransformAndUpdate(xform);
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
Loop loop = new Loop();
loop.Run(doc);
return(Result.Success);
// TODO: start here modifying the behaviour of your command.
// ---
RhinoApp.WriteLine("The {0} command will add a line right now.", EnglishName);
Point3d pt0;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Please select the start point");
if (getPointAction.Get() != GetResult.Point)
{
RhinoApp.WriteLine("No start point was selected.");
return(getPointAction.CommandResult());
}
pt0 = getPointAction.Point();
}
Point3d pt1;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Please select the end point");
getPointAction.SetBasePoint(pt0, true);
getPointAction.DynamicDraw +=
(sender, e) => e.Display.DrawLine(pt0, e.CurrentPoint, System.Drawing.Color.DarkRed);
if (getPointAction.Get() != GetResult.Point)
{
RhinoApp.WriteLine("No end point was selected.");
return(getPointAction.CommandResult());
}
pt1 = getPointAction.Point();
}
doc.Objects.AddLine(pt0, pt1);
doc.Views.Redraw();
RhinoApp.WriteLine("The {0} command added one line to the document.", EnglishName);
// ---
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
ObjRef objref;
var rc = RhinoGet.GetOneObject("Select object to move", false, ObjectType.AnyObject, out objref);
if (rc != Result.Success)
{
return(rc);
}
if (null == objref)
{
return(Result.Failure);
}
Point3d first_point;
rc = RhinoGet.GetPoint("Point to move from", false, out first_point);
if (rc != Result.Success)
{
return(rc);
}
var gp = new GetPoint();
gp.SetCommandPrompt("Point to move to");
gp.SetBasePoint(first_point, true);
gp.DrawLineFromPoint(first_point, true);
gp.Get();
rc = gp.CommandResult();
if (rc != Result.Success)
{
return(rc);
}
var second_point = gp.Point();
var dir = second_point - first_point;
if (dir.Length > RhinoMath.ZeroTolerance)
{
var xform = Transform.Translation(dir);
doc.Objects.Transform(objref, xform, true);
doc.Views.Redraw();
}
return(rc);
}
private Tuple <Point3d, Point3d> GetSpine()
{
// Get user input for spine
bool unsucessfulGetSpine = false;
Point3d pt0 = new Point3d(0, 0, 0);
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Spine: start point");
if (getPointAction.Get() != GetResult.Point)
{
unsucessfulGetSpine = true;
//RhinoApp.WriteLine("No start point was selected.");
//return getPointAction.CommandResult();
}
if (!unsucessfulGetSpine)
{
pt0 = getPointAction.Point();
}
}
Point3d pt1 = new Point3d(0, 0, 0);
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Spine: end point");
getPointAction.SetBasePoint(pt0, true);
getPointAction.DynamicDraw +=
(sender, e) => e.Display.DrawLine(pt0, e.CurrentPoint, System.Drawing.Color.DarkRed);
if (getPointAction.Get() != GetResult.Point)
{
unsucessfulGetSpine = true;
//RhinoApp.WriteLine("No end point was selected.");
//return getPointAction.CommandResult();
}
if (!unsucessfulGetSpine)
{
pt1 = getPointAction.Point();
}
}
if (unsucessfulGetSpine)
{
return(null);
}
return(new Tuple <Point3d, Point3d>(pt0, pt1));
}
protected override Result RunCommand(Rhino.RhinoDoc doc, RunMode mode)
{
#if IncludeSample
// TODO: start here modifying the behaviour of your command.
// ---
RhinoApp.WriteLine("The {0} command will add a line right now.", EnglishName);
Point3d pt0;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Please select the start point");
if (getPointAction.Get() != GetResult.Point)
{
RhinoApp.WriteLine("No start point was selected.");
return(getPointAction.CommandResult());
}
pt0 = getPointAction.Point();
}
Point3d pt1;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Please select the end point");
getPointAction.SetBasePoint(pt0, true);
getPointAction.DrawLineFromPoint(pt0, true);
if (getPointAction.Get() != GetResult.Point)
{
RhinoApp.WriteLine("No end point was selected.");
return(getPointAction.CommandResult());
}
pt1 = getPointAction.Point();
}
doc.Objects.AddLine(pt0, pt1);
doc.Views.Redraw();
RhinoApp.WriteLine("The {0} command added one line to the document.", EnglishName);
return(Result.Success);
#else
// TODO: start here modifying the behaviour of your command.
return(Result.Success);
#endif
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode) // всё происходит здесь внутри
{
// TODO: start here modifying the behaviour of your command.
// ---
RhinoApp.WriteLine("The {0} command will add a line right now.", EnglishName); // сообщение в командной строке о том что команда запущена и что она будет делать
//
Point3d pt0; // декларируем новую переменную точка (начало линии)
using (GetPoint getPointAction = new GetPoint()) // ??
{ //
getPointAction.SetCommandPrompt("Please select the start point"); // призыв к действию в командной строке (жирным)
if (getPointAction.Get() != GetResult.Point) // что делать если точкка не выбрана но был нажет Enter
{ //
RhinoApp.WriteLine("No start point was selected."); // если точкка не выбрана но был нажет Enter, то написать это в командной строке
return(getPointAction.CommandResult()); // ??
} //
pt0 = getPointAction.Point(); // присвоить для переменной pt1 только что выбранную точку
}
Point3d pt1; // декларируе новую переменную точка ( конец линии)
using (GetPoint getPointAction = new GetPoint())
{ //
getPointAction.SetCommandPrompt("Please select the end point");
getPointAction.SetBasePoint(pt0, true);
getPointAction.DynamicDraw +=
(sender, e) => e.Display.DrawLine(pt0, e.CurrentPoint, System.Drawing.Color.DarkRed);
if (getPointAction.Get() != GetResult.Point) // если точкка не выбрана но был нажет Enter
{
RhinoApp.WriteLine("No end point was selected.");
return(getPointAction.CommandResult());
}
pt1 = getPointAction.Point(); // присвоить для переменной pt1 только что выбранную точку
}
doc.Objects.AddLine(pt0, pt1);
doc.Views.Redraw();
RhinoApp.WriteLine("The {0} command added one line to the document.", EnglishName); // сообщение в командную строку что всё готово
// ---
return(Result.Success);
}
protected override Result RunCommand(Rhino.RhinoDoc doc, RunMode mode)
{
// TODO: start here modifying the behaviour of your command.
// ---
RhinoApp.WriteLine("The {0} command will add a line right now.", EnglishName);
Point3d pt0;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Please select the start point");
if (getPointAction.Get() != GetResult.Point)
{
RhinoApp.WriteLine("No start point was selected.");
return(getPointAction.CommandResult());
}
pt0 = getPointAction.Point();
}
Point3d pt1;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Please select the end point");
getPointAction.SetBasePoint(pt0, true);
getPointAction.DrawLineFromPoint(pt0, true);
if (getPointAction.Get() != GetResult.Point)
{
RhinoApp.WriteLine("No end point was selected.");
return(getPointAction.CommandResult());
}
pt1 = getPointAction.Point();
}
Rhino.Geometry.Line line1 = new Line(pt0, pt1);
doc.Objects.AddLine(line1);
doc.Views.Redraw();
RhinoApp.WriteLine("The {0} command added one line to the document.", EnglishName);
RhinoApp.WriteLine("The distance between the two points is {0} {1}.", line1.Length, doc.ModelUnitSystem.ToString().ToLower());
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
ObjRef[] obj_refs;
var rc = RhinoGet.GetMultipleObjects("Select points to move", false, ObjectType.Point, out obj_refs);
if (rc != Result.Success || obj_refs == null)
{
return(rc);
}
var gp = new GetPoint();
gp.SetCommandPrompt("Point to move from");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var start_point = gp.Point();
gp.SetCommandPrompt("Point to move to");
gp.SetBasePoint(start_point, false);
gp.DrawLineFromPoint(start_point, true);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var end_point = gp.Point();
var xform = Transform.Translation(end_point - start_point);
foreach (var obj_ref in obj_refs)
{
doc.Objects.Transform(obj_ref, xform, true);
}
doc.Views.Redraw();
return(Result.Success);
}
public static Result Ortho(RhinoDoc doc)
{
var gp = new GetPoint();
gp.SetCommandPrompt("Start of line");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var start_point = gp.Point();
var original_ortho = ModelAidSettings.Ortho;
if (!original_ortho)
{
ModelAidSettings.Ortho = true;
}
gp.SetCommandPrompt("End of line");
gp.SetBasePoint(start_point, false);
gp.DrawLineFromPoint(start_point, true);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var end_point = gp.Point();
if (ModelAidSettings.Ortho != original_ortho)
{
ModelAidSettings.Ortho = original_ortho;
}
doc.Objects.AddLine(start_point, end_point);
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
var go = new GetObject();
go.SetCommandPrompt("Select curve to intersect");
go.GeometryFilter = ObjectType.Curve;
go.Get();
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
var curve = go.Object(0).Curve();
if (null == curve)
{
return(Result.Failure);
}
var gp = new GetPoint();
gp.SetCommandPrompt("First point of infinite intersecting line");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var from = gp.Point();
gp.SetCommandPrompt("Second point of infinite intersecting line");
gp.SetBasePoint(from, true);
gp.DrawLineFromPoint(from, true);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var line = new Rhino.Geometry.Line(from, gp.Point());
if (!line.IsValid || line.Length < Rhino.RhinoMath.SqrtEpsilon)
{
return(Result.Nothing);
}
var ccx = IntersectCurveLine(curve, line, doc.ModelAbsoluteTolerance, doc.ModelAbsoluteTolerance);
if (null != ccx)
{
foreach (var x in ccx)
{
if (x.IsPoint)
{
doc.Objects.AddPoint(x.PointA);
}
}
doc.Views.Redraw();
}
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
if (TimePanel.Instance.Restarted && TimePanel.Instance.TrackbarValue == 0)
{
RhinoApp.WriteLine("Now it's time to draw a sphere");
Point3d pt0;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("The center of the sphere");
if (getPointAction.Get() != GetResult.Point) //getPointAction.Get() rimane in attesa del punto
{
RhinoApp.WriteLine("No center point was selected.");
return(getPointAction.CommandResult());
}
pt0 = getPointAction.Point();
if (pt0.Z != 0)
{
RhinoApp.WriteLine("The center of the sphere is not on the plane XY");
return(getPointAction.CommandResult());
}
}
Point3d pt1;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("The end point of the radius of the sphere");
getPointAction.SetBasePoint(pt0, true);
getPointAction.DynamicDraw +=
(sender, e) =>
{
e.Display.DrawSphere(new Sphere(pt0, new Line(pt0, e.CurrentPoint).Length), Color.Black);
};
if (getPointAction.Get() != GetResult.Point) //getPointAction.Get() rimane in attesa del punto
{
RhinoApp.WriteLine("No radius point was selected.");
return(getPointAction.CommandResult());
}
pt1 = getPointAction.Point();
}
double radius = new Line(pt0, pt1).Length;
Shape sphereShape = new SphereShape((float)radius);
RigidBody rigidSphere = new RigidBody(sphereShape);
rigidSphere.Position = new JVector((float)pt0.X, (float)pt0.Y, (float)pt0.Z);
Sphere sphere = new Sphere(pt0, radius);
//Original one with the center in 0,0,0
Sphere copySphere = new Sphere(new Point3d(0, 0, 0), radius);
Brep brepSphere = copySphere.ToBrep();
//Copy to translate and rotate
Brep copyToAdd = sphere.ToBrep();
RigidBodyManager.RigidBodies.Add(rigidSphere);
RigidBodyManager.GeometryList.Add(brepSphere);
RigidBodyManager.GuidList.Add(doc.Objects.Add(copyToAdd));
doc.Views.Redraw();
return(Result.Success);
}
else
{
Dialogs.ShowMessage("Press Restart before use other commands", "Warning", ShowMessageButton.OK, ShowMessageIcon.Warning);
return(Result.Success);
}
}
private static Result GetTolerance(ref double tolerance)
{
var gp = new GetPoint();
gp.SetCommandPrompt("Tolerance");
gp.SetDefaultNumber(tolerance);
gp.AcceptNumber(true, false);
for (; ;)
{
var res = gp.Get();
if (res == GetResult.Number)
{
var d = gp.Number();
if (d < 0.0)
{
RhinoApp.WriteLine("Tolerance must be greater than 0.");
}
else
{
tolerance = d;
return(Result.Success);
}
}
if (res != GetResult.Point)
{
return(Result.Cancel);
}
break;
}
var base_point = gp.Point();
gp.SetBasePoint(base_point, true);
gp.DrawLineFromPoint(base_point, true);
gp.DynamicDrawColor = Rhino.ApplicationSettings.AppearanceSettings.TrackingColor;
for (; ;)
{
var res = gp.Get();
if (res == GetResult.Number)
{
var d = gp.Number();
if (d < 0.0)
{
RhinoApp.WriteLine("Tolerance must be greater than 0.");
}
else
{
tolerance = d;
return(Result.Success);
}
}
if (res != GetResult.Point)
{
return(Result.Cancel);
}
break;
}
tolerance = base_point.DistanceTo(gp.Point());
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
if (m_draw_conduit != null)
{
RhinoApp.WriteLine("Turn off existing arrowhead conduit");
m_draw_conduit.Enabled = false;
m_draw_conduit = null;
}
else
{
// get arrow head size
var go = new GetOption();
go.SetCommandPrompt("ArrowHead length in screen size (pixels) or world size (percentage of arrow length)?");
go.AddOption("screen");
go.AddOption("world");
go.Get();
if (go.CommandResult() != Result.Success)
{
return(go.CommandResult());
}
int screen_size = 0;
double world_size = 0.0;
if (go.Option().EnglishName == "screen")
{
var gi = new GetInteger();
gi.SetLowerLimit(0, true);
gi.SetCommandPrompt("Length of arrow head in pixels");
gi.Get();
if (gi.CommandResult() != Result.Success)
{
return(gi.CommandResult());
}
screen_size = gi.Number();
}
else
{
var gi = new GetInteger();
gi.SetLowerLimit(0, true);
gi.SetUpperLimit(100, false);
gi.SetCommandPrompt("Length of arrow head in percentage of total arrow length");
gi.Get();
if (gi.CommandResult() != Result.Success)
{
return(gi.CommandResult());
}
world_size = gi.Number() / 100.0;
}
// get arrow start and end points
var gp = new GetPoint();
gp.SetCommandPrompt("Start of line");
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var start_point = gp.Point();
gp.SetCommandPrompt("End of line");
gp.SetBasePoint(start_point, false);
gp.DrawLineFromPoint(start_point, true);
gp.Get();
if (gp.CommandResult() != Result.Success)
{
return(gp.CommandResult());
}
var end_point = gp.Point();
var v = end_point - start_point;
if (v.IsTiny(Rhino.RhinoMath.ZeroTolerance))
{
return(Result.Nothing);
}
var line = new Line(start_point, end_point);
m_draw_conduit = new DrawArrowHeadsConduit(line, screen_size, world_size);
// toggle conduit on/off
m_draw_conduit.Enabled = true;
RhinoApp.WriteLine("Draw arrowheads conduit enabled.");
}
doc.Views.Redraw();
return(Result.Success);
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
if (TimePanel.Instance.Restarted && TimePanel.Instance.TrackbarValue == 0)
{
RhinoApp.WriteLine("Now it's time to draw a box");
Point3d pt0;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("First corner of the base");
if (getPointAction.Get() != GetResult.Point) //getPointAction.Get() rimane in attesa del punto
{
RhinoApp.WriteLine("No corner point was selected.");
return(getPointAction.CommandResult());
}
pt0 = getPointAction.Point();
if (pt0.Z != 0)
{
RhinoApp.WriteLine("The base of the square is not on the plane XY");
return(getPointAction.CommandResult());
}
}
Point3d pt1;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Other corner of the base");
getPointAction.SetBasePoint(pt0, true);
getPointAction.DynamicDraw +=
(sender, e) =>
{
e.Display.DrawLine(pt0, new Point3d(pt0.X, e.CurrentPoint.Y, 0), Color.Black);
e.Display.DrawLine(pt0, new Point3d(e.CurrentPoint.X, pt0.Y, 0), Color.Black);
e.Display.DrawLine(new Point3d(pt0.X, e.CurrentPoint.Y, 0), e.CurrentPoint, Color.Black);
e.Display.DrawLine(new Point3d(e.CurrentPoint.X, pt0.Y, 0), e.CurrentPoint, Color.Black);
};
if (getPointAction.Get() != GetResult.Point) //getPointAction.Get() rimane in attesa del punto
{
RhinoApp.WriteLine("No corner point was selected.");
return(getPointAction.CommandResult());
}
pt1 = getPointAction.Point();
if (pt1.Z != 0)
{
RhinoApp.WriteLine("The base of the square is not on the plane XY");
return(getPointAction.CommandResult());
}
if (pt1.Equals(pt0))
{
RhinoApp.WriteLine("The second point is the same of the first");
return(getPointAction.CommandResult());
}
}
Point3d pt2;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Height");
getPointAction.SetBasePoint(pt1, true);
var line = new Rhino.Geometry.Line(pt1, new Point3d(pt1.X, pt1.Y, 1));
getPointAction.Constrain(line);
getPointAction.DynamicDraw +=
(sender, e) =>
{
e.Display.DrawLine(pt0, new Point3d(pt0.X, pt1.Y, 0), Color.Black);
e.Display.DrawLine(pt0, new Point3d(pt1.X, pt0.Y, 0), Color.Black);
e.Display.DrawLine(new Point3d(pt0.X, pt1.Y, 0), pt1, Color.Black);
e.Display.DrawLine(new Point3d(pt1.X, pt0.Y, 0), pt1, Color.Black);
e.Display.DrawLine(new Point3d(pt0.X, pt0.Y, e.CurrentPoint.Z), new Point3d(pt0.X, pt1.Y, e.CurrentPoint.Z), Color.Black);
e.Display.DrawLine(new Point3d(pt0.X, pt0.Y, e.CurrentPoint.Z), new Point3d(pt1.X, pt0.Y, e.CurrentPoint.Z), Color.Black);
e.Display.DrawLine(new Point3d(pt0.X, pt1.Y, e.CurrentPoint.Z), e.CurrentPoint, Color.Black);
e.Display.DrawLine(new Point3d(pt1.X, pt0.Y, e.CurrentPoint.Z), e.CurrentPoint, Color.Black);
e.Display.DrawLine(pt0, new Point3d(pt0.X, pt0.Y, e.CurrentPoint.Z), Color.Black);
e.Display.DrawLine(pt1, new Point3d(pt1.X, pt1.Y, e.CurrentPoint.Z), Color.Black);
e.Display.DrawLine(new Point3d(pt0.X, pt1.Y, e.CurrentPoint.Z), new Point3d(pt0.X, pt1.Y, 0), Color.Black);
e.Display.DrawLine(new Point3d(pt1.X, pt0.Y, e.CurrentPoint.Z), new Point3d(pt1.X, pt0.Y, 0), Color.Black);
};
if (getPointAction.Get() != GetResult.Point) //getPointAction.Get() rimane in attesa del punto
{
RhinoApp.WriteLine("No Height point was selected.");
return(getPointAction.CommandResult());
}
pt2 = getPointAction.Point();
if (pt2.Z == 0)
{
RhinoApp.WriteLine("The height of the box must be different of 0");
return(getPointAction.CommandResult());
}
}
//Find center of the box
Point3d middleDiagonal = new Point3d((pt0.X + pt1.X) / 2, (pt0.Y + pt1.Y) / 2, 0);
Point3d middleHeight = new Point3d(0, 0, (pt1.Z + pt2.Z) / 2);
Point3d centerBox = new Point3d(middleDiagonal.X, middleDiagonal.Y, middleHeight.Z);
//Find dimension of the box
Shape boxShape = new BoxShape((float)Math.Abs(pt1.X - pt0.X), (float)Math.Abs(pt1.Y - pt0.Y), (float)Math.Abs(pt2.Z));
RigidBody rigidBox = new RigidBody(boxShape);
rigidBox.Position = new JVector((float)centerBox.X, (float)centerBox.Y, (float)centerBox.Z);
Box box = new Box(new BoundingBox(RigidBodyManager.JVectorToPoint3d(boxShape.BoundingBox.Min), RigidBodyManager.JVectorToPoint3d(boxShape.BoundingBox.Max)));
//Original one with the center in 0,0,0
Brep brepBox = box.ToBrep();
//Copy to translate and rotate
Brep copyToAdd = brepBox.DuplicateBrep();
//Move the box to the correct position
copyToAdd.Translate(centerBox.X, centerBox.Y, centerBox.Z);
RigidBodyManager.RigidBodies.Add(rigidBox);
RigidBodyManager.GeometryList.Add(brepBox);
RigidBodyManager.GuidList.Add(doc.Objects.Add(copyToAdd));
doc.Views.Redraw();
return(Result.Success);
}
else
{
Dialogs.ShowMessage("Press Restart before use other commands", "Warning", ShowMessageButton.OK, ShowMessageIcon.Warning);
return(Result.Success);
}
}
// gets the third point from the user
private Result GetThirdPoint(Point3d firstPt, Point3d secondPt, ref Point3d pt, bool IsFirstRun)
{
Run myRun;
using (GetPoint getPointAction = new GetPoint())
{
if (IsFirstRun)
{
getPointAction.AddOptionDouble("Width", ref this.width);
getPointAction.AddOptionDouble("RailHeight", ref this.railHeight);
getPointAction.AddOptionToggle("LeftRail", ref this.leftRail);
getPointAction.AddOptionToggle("RightRail", ref this.rightRail);
}
if (!IsFirstRun)
{
getPointAction.AddOptionToggle("Landing", ref this.LandingToggle);
}
getPointAction.SetCommandPrompt("Select the third point to determine the height of the run");
getPointAction.SetBasePoint(secondPt, true);
getPointAction.Constrain(secondPt, secondPt + Vector3d.ZAxis);
getPointAction.DynamicDraw += (sender, e) =>
{
myRun = new Run(firstPt, e.CurrentPoint, this.width.CurrentValue);
updateRunOptions(ref myRun);
Color drawColor = Color.White;
if (!myRun.IsValid)
{
double validVert = myRun.VerticalDistance;
double mySlope = myRun.VerticalDistance / myRun.HorizontalDistance;
if (mySlope < code.MIN_SLOPE)
{
validVert = myRun.HorizontalDistance * code.MIN_SLOPE;
}
else if (mySlope > code.MAX_SLOPE)
{
validVert = myRun.HorizontalDistance * code.MAX_SLOPE;
}
Point3d validEndPt = secondPt + (myRun.RiserDirection * validVert);
Run validRun = new Run(firstPt, validEndPt, this.width.CurrentValue);
updateRunOptions(ref validRun);
e.Display.DrawSurface(validRun.getStepSurface(), drawColor, 1);
drawColor = Color.Red;
}
e.Display.DrawSurface(myRun.getStepSurface(), drawColor, 2);
e.Display.DrawLines(myRun.getRails(), drawColor);
e.Display.DrawLines(myRun.getBalusters(), drawColor);
//drawing the landing if this is not the first run
if ((!IsFirstRun) && LandingToggle.CurrentValue)
{
Landing land = new Landing(this.prevRun, myRun);
if (land.IsValid)
{
e.Display.DrawBrepWires(land.LandingSurface, Color.Blue);
List <Curve> railing = land.getRailings(this.leftRail.CurrentValue, this.rightRail.CurrentValue);
foreach (Curve rail in railing)
{
e.Display.DrawCurve(rail, Color.Blue);
}
}
}
};
while (true)
{
GetResult get_rc = getPointAction.Get();
if (getPointAction.CommandResult() != Result.Success)
{
return(getPointAction.CommandResult());
}
if (get_rc == GetResult.Point)
{
pt = getPointAction.Point();
}
else if (get_rc == GetResult.Option)
{
continue;
}
break;
}
return(Result.Success);
}
}
//gets the second point from the user
private Result GetSecondPoint(Point3d firstPt, ref Point3d pt, bool IsFirstRun)
{
Run myRun;
using (GetPoint getPointAction = new GetPoint())
{
if (IsFirstRun)
{
getPointAction.AddOptionDouble("Width", ref this.width);
getPointAction.AddOptionDouble("RailHeight", ref this.railHeight);
getPointAction.AddOptionToggle("LeftRail", ref this.leftRail);
getPointAction.AddOptionToggle("RightRail", ref this.rightRail);
}
if (!IsFirstRun)
{
getPointAction.AddOptionToggle("Landing", ref this.LandingToggle);
}
getPointAction.SetCommandPrompt("Select the ending point of the run (projected)");
getPointAction.SetBasePoint(firstPt, true);
Plane hPlane = new Plane(firstPt, Vector3d.ZAxis);
getPointAction.Constrain(hPlane, false);
getPointAction.DynamicDraw += (sender, e) =>
{
myRun = new Run(firstPt, e.CurrentPoint, this.width.CurrentValue);
e.Display.DrawLines(myRun.getFlatLines(), Color.White);
if ((!IsFirstRun) && LandingToggle.CurrentValue)
{
Landing land = new Landing(this.prevRun, myRun);
if (land.IsValid)
{
e.Display.DrawBrepWires(land.LandingSurface, Color.Blue);
}
}
string textTip = String.Format("N: {0}\nMax.Ht:{1}", myRun.NumSteps, myRun.NumSteps * code.MAX_RISER);
e.Display.Draw3dText(new Rhino.Display.Text3d(textTip,
new Plane(e.CurrentPoint, Vector3d.ZAxis), code.MIN_TREAD / 2),
Color.Blue,
e.CurrentPoint);
//e.Display.Draw2dText("Hello", Color.White, Rhino.UI.MouseCallback.)
};
while (true)
{
GetResult get_rc = getPointAction.Get();
if (getPointAction.CommandResult() != Result.Success)
{
return(getPointAction.CommandResult());
}
if (get_rc == GetResult.Point)
{
pt = getPointAction.Point();
}
else if (get_rc == GetResult.Option)
{
continue;
}
break;
}
return(Result.Success);
}
}
protected override Result RunCommand(RhinoDoc doc, RunMode mode)
{
if (TimePanel.Instance.Restarted && TimePanel.Instance.TrackbarValue == 0)
{
RhinoApp.WriteLine("Now it's time to draw a cylinder");
Point3d pt0;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("The center of the base");
if (getPointAction.Get() != GetResult.Point) //getPointAction.Get() rimane in attesa del punto
{
RhinoApp.WriteLine("No center point was selected.");
return(getPointAction.CommandResult());
}
pt0 = getPointAction.Point();
if (pt0.Z != 0)
{
RhinoApp.WriteLine("The center of the cylinder is not on the plane XY");
return(getPointAction.CommandResult());
}
}
Point3d pt1;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("The end point of the radius of the cylinder");
getPointAction.SetBasePoint(pt0, true);
var line = new Line(pt0, new Point3d(pt0.X, pt0.Y, 1));
getPointAction.Constrain(line);
getPointAction.DynamicDraw +=
(sender, e) =>
{
e.Display.DrawLine(new Line(e.CurrentPoint, new Point3d(e.CurrentPoint.X, e.CurrentPoint.Y, -e.CurrentPoint.Z)), Color.Black);
};
if (getPointAction.Get() != GetResult.Point) //getPointAction.Get() rimane in attesa del punto
{
RhinoApp.WriteLine("No radius point was selected.");
return(getPointAction.CommandResult());
}
pt1 = getPointAction.Point();
}
Point3d pt2;
using (GetPoint getPointAction = new GetPoint())
{
getPointAction.SetCommandPrompt("Height");
getPointAction.SetBasePoint(pt1, true);
var line = new Rhino.Geometry.Line(pt1, new Point3d(pt1.X, 1, pt1.Z));
getPointAction.Constrain(line);
getPointAction.DynamicDraw +=
(sender, e) =>
{
e.Display.DrawLine(new Line(pt1, new Point3d(pt1.X, pt1.Y, -pt1.Z)), Color.Black);
e.Display.DrawLine(new Line(pt1, e.CurrentPoint), Color.Black);
e.Display.DrawLine(new Line(new Point3d(e.CurrentPoint.X, e.CurrentPoint.Y, -e.CurrentPoint.Z), e.CurrentPoint), Color.Black);
};
if (getPointAction.Get() != GetResult.Point) //getPointAction.Get() rimane in attesa del punto
{
RhinoApp.WriteLine("No Height point was selected.");
return(getPointAction.CommandResult());
}
pt2 = getPointAction.Point();
if (pt2.Z == 0)
{
RhinoApp.WriteLine("The height of the cylinder must be different of 0");
return(getPointAction.CommandResult());
}
}
double radius = new Line(pt0, pt1).Length;
double height = new Line(pt1, pt2).Length;
Shape cylinderShape = new CylinderShape((float)height, (float)radius);
RigidBody rigidCylinder = new RigidBody(cylinderShape);
//Translate to the user position
rigidCylinder.Position = new JVector((float)(pt0.X), (float)(pt0.Y - height / 2), 0);
Cylinder cylinder = new Cylinder(new Circle(Point3d.Origin, radius), height);
//Original one with the center in 0,0,0
Cylinder copyCylinder = new Cylinder(new Circle(new Point3d(0, 0, 0), radius), height);
Brep brepCylinder = copyCylinder.ToBrep(true, true);
Transform trafo = MatrixXRotation(90);
trafo = trafo.Transpose();
//put center in 0,0,0
brepCylinder.Translate(new Vector3d(0, 0, -height / 2));
brepCylinder.Transform(trafo);
//Copy to translate and rotate
Brep copyToAdd = cylinder.ToBrep(true, true);
copyToAdd.Translate(new Vector3d(0, 0, -height / 2));
copyToAdd.Transform(trafo);
if (pt0.Y > pt2.Y)
{
copyToAdd.Translate(new Vector3d(pt0.X, pt0.Y - height / 2, 0));
}
else
{
copyToAdd.Translate(new Vector3d(pt2.X, pt2.Y - height / 2, 0));
}
RigidBodyManager.RigidBodies.Add(rigidCylinder);
RigidBodyManager.GeometryList.Add(brepCylinder);
RigidBodyManager.GuidList.Add(doc.Objects.Add(copyToAdd));
doc.Views.Redraw();
}
else
{
Dialogs.ShowMessage("Press Restart before use other commands", "Warning", ShowMessageButton.OK, ShowMessageIcon.Warning);
}
return(Result.Success);
}