/// <summary>
/// 当结果返回True 时 表示两个零件不一样，结果false时表示 两个零件一样
/// </summary>
/// <param name="sendTocustomer"></param>
/// <param name="localModel"></param>
/// <returns></returns>
public bool CheckTwoParts(string sendTocustomer, string localModel)
{
bool different1 = false;
bool different2 = false;
swApp = ConnectToSolidWorks();
// swApp = ConnectToSolidWorks();
//加载参考关系零件
swApp.SetUserPreferenceIntegerValue((int)swUserPreferenceIntegerValue_e.swLoadExternalReferences, (int)swLoadExternalReferences_e.swLoadExternalReferences_ChangedOnly);
//后台模式 前台不显示界面
swApp.EnableBackgroundProcessing = true;
//禁止记录文件路径
swApp.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swLockRecentDocumentsList, true);
swApp.OpenDoc(localModel, 1);
swApp.OpenDoc(sendTocustomer, 1);
ModelDoc2 swModel = (ModelDoc2)swApp.ActiveDoc;
string LocalPath = System.IO.Directory.GetParent(swModel.GetPathName()).ToString();
string tempAssembly = swApp.GetUserPreferenceStringValue((int)swUserPreferenceStringValue_e.swDefaultTemplateAssembly);
AssemblyDoc assemblyDoc = (AssemblyDoc)swApp.NewDocument(tempAssembly, 0, 0, 0);
Component2 insertComponentSendtoCustomer = assemblyDoc.AddComponent5(sendTocustomer, 0, "", false, "", 0, 0, 0);
Component2 insertComponentLocal = assemblyDoc.AddComponent5(localModel, 0, "", false, "", 0, 0, 0);
string sendSelect = insertComponentSendtoCustomer.GetSelectByIDString();
string localSelect = insertComponentLocal.GetSelectByIDString();
swModel = (ModelDoc2)swApp.ActiveDoc;
bool b1 = swModel.Extension.SelectByID2("Point1@Origin" + "@" + sendSelect, "EXTSKETCHPOINT", 0, 0, 0, false, 0, null, 0);
bool b2 = swModel.Extension.SelectByID2("Point1@Origin" + "@" + localSelect, "EXTSKETCHPOINT", 0, 0, 0, true, 0, null, 0);
int longstatus;
Mate2 mate2 = assemblyDoc.AddMate5(20, -1, false, 0, 0.001, 0.001, 0.001, 0.001, 0, 0, 0, false, false, 0, out longstatus);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.SaveAs(LocalPath + @"\TopCheck.sldasm");
//不显示特征树
//swModel.Extension.HideFeatureManager(true);
swModel.ClearSelection2(true);
//swModel.FeatureManager.ViewFeatures = false;
//FeatureManager featureManager = swModel.FeatureManager;
//禁用特征树
//featureManager.EnableFeatureTree = false;
// swModel.FeatureManager.EnableFeatureTreeWindow = false;
#region first join
Component2 sendToCustomerBodies = default(Component2);
List <Component2> sendToCustomerBodiesList = new List <Component2>();
object swFaceOrPlane = default(object);
assemblyDoc.InsertNewVirtualPart(swFaceOrPlane, out sendToCustomerBodies);
sendToCustomerBodies.Select(true);
assemblyDoc.FixComponent();
sendToCustomerBodies.Select(true);
assemblyDoc.EditPart();
insertComponentSendtoCustomer.Select(false);
insertComponentLocal.Select(true);
assemblyDoc.InsertJoin2(false, false);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.BreakAllExternalReferences();
object[] splits = sendToCustomerBodies.Name2.Split('^');
// string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + splits[0];
string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + "localBodies-1";
ModelDoc2 compModel = default(ModelDoc2);
compModel = (ModelDoc2)sendToCustomerBodies.GetModelDoc();
if (compModel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
compName = compName + ".sldprt";
}
else
{
compName = compName + ".sldasm";
}
bool ret;
ret = sendToCustomerBodies.SaveVirtualComponent(compName);
sendToCustomerBodiesList.Add(sendToCustomerBodies);
insertComponentSendtoCustomer.Select(false);
swModel = (ModelDoc2)sendToCustomerBodies.GetModelDoc2();
#region 获取所有零件中的零件，每一个实体做一次反切
List <string> bodyNamesCustomer = new List <string>();
PartDoc swPart = null;
object vBody;
swPart = (PartDoc)swModel;
// Solid bodies
object[] vBodyArr = null;
Body2 swBody = default(Body2);
MathTransform swMathTrans = null;
vBodyArr = (object[])swPart.GetBodies2((int)swBodyType_e.swSolidBody, true);
if ((vBodyArr != null))
{
// Debug.Print(" Number of solid bodies: " + vBodyArr.Length);
foreach (object vBody_loopVariable in vBodyArr)
{
vBody = vBody_loopVariable;
swBody = (Body2)vBody;
string[] vConfigName = null;
vConfigName = (string[])swModel.GetConfigurationNames();
string sMatDB = "";
string sMatName = swBody.GetMaterialPropertyName("", out sMatDB);
//bRet = swBody.RemoveMaterialProperty((int)swInConfigurationOpts_e.swAllConfiguration, (vConfigName));
//Debug.Print("Body--> " + swBody.Name + " " + "");
bodyNamesCustomer.Add(swBody.Name);
}
}
//如果实体数量大于1，则继续新建对应数量的join 实体。
OnlyKeepNamedBody(bodyNamesCustomer[0], sendToCustomerBodies.GetSelectByIDString(), assemblyDoc, sendToCustomerBodies, insertComponentSendtoCustomer, ref different1);
if (bodyNamesCustomer.Count > 1)
{
assemblyDoc.EditAssembly();
for (int i = 0; i < bodyNamesCustomer.Count - 1; i++)
{
Component2 returnpart = default(Component2);
var partSelect = CreateNewJoinPart(assemblyDoc, insertComponentSendtoCustomer, insertComponentLocal, swModel, "localBodies-" + (i + 2), out returnpart);
sendToCustomerBodiesList.Add(returnpart);
OnlyKeepNamedBody(bodyNamesCustomer[i + 1], partSelect, assemblyDoc, returnpart, insertComponentSendtoCustomer, ref different1);
}
}
// boolstatus = Part.Extension.SelectByID2("Join1[2]@localBodies-1@TopCheck", "SOLIDBODY", 0, 0, 0, True, 0, Nothing, 0)
//Dim myFeature As Object
//Set myFeature = Part.FeatureManager.InsertDeleteBody2(True)
#endregion 获取所有零件中的零件，每一个实体做一次反切
//assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
Feature theFeature;
//theFeature = swModel.FeatureByPositionReverse(0);
//if (theFeature.Name.Contains("Cavity"))
//{
// //theFeature.Select(true);
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + sendToCustomerBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.BreakAllExternalReferences();
// different1 = true;
// //JoinPart1 留下的: 发给客户的没有此部分。 而本地零件中有
//}
//else
//{
// //无法Join时表示 全切了。
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + sendToCustomerBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.EditSuppress();
//}
//sendToCustomerBodies.Select(true);
assemblyDoc.EditAssembly();
#endregion first join
#region sercond join2
Component2 localBodies = default(Component2);
List <Component2> LocalBodiesList = new List <Component2>();
assemblyDoc.InsertNewVirtualPart(swFaceOrPlane, out localBodies);
localBodies.Select(true);
assemblyDoc.FixComponent();
localBodies.Select(true);
assemblyDoc.EditPart();
insertComponentSendtoCustomer.Select(false);
insertComponentLocal.Select(true);
assemblyDoc.InsertJoin2(false, false);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.BreakAllExternalReferences();
splits = localBodies.Name2.Split('^');
// string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + splits[0];
compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + "sendToCustomerBodies-1";
compModel = default(ModelDoc2);
compModel = (ModelDoc2)localBodies.GetModelDoc();
if (compModel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
compName = compName + ".sldprt";
}
else
{
compName = compName + ".sldasm";
}
ret = localBodies.SaveVirtualComponent(compName);
LocalBodiesList.Add(localBodies);
insertComponentLocal.Select(false);
swModel = (ModelDoc2)localBodies.GetModelDoc2();
#region 获取所有零件中的零件，每一个实体做一次反切
List <string> bodyNamesLocal = new List <string>();
PartDoc swPart2 = null;
object vBody2;
swPart2 = (PartDoc)swModel;
// Solid bodies
object[] vBodyArr2 = null;
Body2 swBody2 = default(Body2);
MathTransform swMathTrans2 = null;
vBodyArr2 = (object[])swPart2.GetBodies2((int)swBodyType_e.swSolidBody, true);
if ((vBodyArr2 != null))
{
// Debug.Print(" Number of solid bodies: " + vBodyArr.Length);
foreach (object vBody_loopVariable in vBodyArr2)
{
vBody2 = vBody_loopVariable;
swBody2 = (Body2)vBody2;
string[] vConfigName = null;
vConfigName = (string[])swModel.GetConfigurationNames();
string sMatDB = "";
string sMatName = swBody2.GetMaterialPropertyName("", out sMatDB);
//bRet = swBody.RemoveMaterialProperty((int)swInConfigurationOpts_e.swAllConfiguration, (vConfigName));
bodyNamesLocal.Add(swBody2.Name);
}
}
//如果实体数量大于1，则继续新建对应数量的join 实体。
OnlyKeepNamedBody(bodyNamesLocal[0], localBodies.GetSelectByIDString(), assemblyDoc, localBodies, insertComponentLocal, ref different2);
if (bodyNamesLocal.Count > 1)
{
assemblyDoc.EditAssembly();
for (int i = 0; i < bodyNamesLocal.Count - 1; i++)
{
Component2 returnpart = default(Component2);
var partSelect = CreateNewJoinPart(assemblyDoc, insertComponentSendtoCustomer, insertComponentLocal, swModel, "sendToCustomerBodies-" + (i + 2), out returnpart);
LocalBodiesList.Add(returnpart);
OnlyKeepNamedBody(bodyNamesLocal[i + 1], partSelect, assemblyDoc, returnpart, insertComponentLocal, ref different2);
}
}
// boolstatus = Part.Extension.SelectByID2("Join1[2]@localBodies-1@TopCheck", "SOLIDBODY", 0, 0, 0, True, 0, Nothing, 0)
//Dim myFeature As Object
//Set myFeature = Part.FeatureManager.InsertDeleteBody2(True)
#endregion 获取所有零件中的零件，每一个实体做一次反切
//assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
//theFeature = swModel.FeatureByPositionReverse(0);
//swModel = (ModelDoc2)localBodies.GetModelDoc2();
//theFeature = swModel.FeatureByPositionReverse(0);
//if (theFeature.Name.Contains("Cavity"))
//{
// //theFeature.Select(true);
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + localBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.BreakAllExternalReferences();
// different2 = true;
// //JoinPart2 留下的: 发给客户的有此部分。 而本地零件中没有
//}
//else
//{
// //无法Join时表示 全切了。
// swModel = (ModelDoc2)swApp.ActiveDoc;
// bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + sendToCustomerBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
// swModel.EditSuppress();
//}
//localBodies.Select(true);
//assemblyDoc.EditAssembly();
#endregion sercond join2
#region joinPartPublic
Component2 publicBodies = default(Component2);
assemblyDoc.InsertNewVirtualPart(swFaceOrPlane, out publicBodies);
publicBodies.Select(true);
assemblyDoc.FixComponent();
publicBodies.Select(true);
assemblyDoc.EditPart();
insertComponentSendtoCustomer.Select(false);
insertComponentLocal.Select(true);
assemblyDoc.InsertJoin2(false, false);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.BreakAllExternalReferences();
splits = publicBodies.Name2.Split('^');
// string compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + splits[0];
compName = System.IO.Directory.GetParent(swModel.GetPathName()) + "\\" + "publicBodies";
compModel = default(ModelDoc2);
compModel = (ModelDoc2)publicBodies.GetModelDoc();
if (compModel.GetType() == (int)swDocumentTypes_e.swDocPART)
{
compName = compName + ".sldprt";
}
else
{
compName = compName + ".sldasm";
}
ret = publicBodies.SaveVirtualComponent(compName);
swModel.ClearSelection();
foreach (var item in sendToCustomerBodiesList)
{
item.Select(false);
assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
swModel = (ModelDoc2)publicBodies.GetModelDoc2();
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
if (theFeature.Name.Contains("Cavity"))
{
//theFeature.Select(true);
swModel = (ModelDoc2)swApp.ActiveDoc;
bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + publicBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
swModel.BreakAllExternalReferences();
//joinPartPublic 留下的: 发给客户的有此部分。 而本地零件中没有
}
else
{
}
}
foreach (var item in LocalBodiesList)
{
item.Select(false);
assemblyDoc.InsertCavity4(0, 0, 0, true, 1, -1);
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
swModel = (ModelDoc2)publicBodies.GetModelDoc2();
theFeature = (Feature)swModel.FeatureByPositionReverse(0);
if (theFeature.Name.Contains("Cavity"))
{
//theFeature.Select(true);
swModel = (ModelDoc2)swApp.ActiveDoc;
bool b = swModel.Extension.SelectByID2(theFeature.Name + "@" + publicBodies.GetSelectByIDString(), "BODYFEATURE", 0, 0, 0, false, 0, null, 0);
swModel.BreakAllExternalReferences();
//joinPartPublic 留下的: 发给客户的有此部分。 而本地零件中没有
}
else
{
}
}
publicBodies.Select(true);
assemblyDoc.EditAssembly();
#endregion joinPartPublic
foreach (var item in sendToCustomerBodiesList)
{
item.Select(false);
setColour(Color.Red);
}
foreach (var item in LocalBodiesList)
{
item.Select(false);
setColour(Color.Blue);
}
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.ClearSelection2(true);
insertComponentLocal.Select(false);
insertComponentSendtoCustomer.Select(true);
swModel.HideComponent2();
swModel.ClearSelection2(true);
publicBodies.Select(false);
assemblyDoc.SetComponentTransparent(true);
setColour(Color.Green);
swModel.EditRebuild3();
swModel.Save();
swModel.SaveAs3(LocalPath + @"\01_CheckResult.sldprt", 0, 0);
swApp.CloseDoc("TopCheck.sldasm");
swApp.CloseAllDocuments(true);
swApp.OpenDoc(LocalPath + @"\01_CheckResult.sldprt", 1);
swModel = (ModelDoc2)swApp.ActiveDoc;
swModel.ShowNamedView2("*Isometric", 7);
swModel.ViewZoomtofit2();
swApp.SetUserPreferenceToggle((int)swUserPreferenceToggle_e.swLockRecentDocumentsList, false);
try
{
System.IO.File.Delete(LocalPath + @"\TopCheck.sldasm");
System.IO.File.Delete(LocalPath + @"\localBodies.sldprt");
System.IO.File.Delete(LocalPath + @"\sendToCustomerBodies.sldprt");
System.IO.File.Delete(LocalPath + @"\publicBodies.sldprt");
}
catch (Exception)
{
}
//第二次反向剪切
swApp.CloseDoc(sendTocustomer);
swApp.CloseDoc(localModel);
swModel.FeatureManager.EnableFeatureTree = true;
swApp.SetUserPreferenceIntegerValue((int)swUserPreferenceIntegerValue_e.swLoadExternalReferences, 2);
if (different1 == false && different2 == false)
{
return(false);
}
else
{
return(true);
}
}
private void ListBodies()
{
ModelDoc2 swModel = null;
PartDoc swPart = null;
object vBody;
bool bRet;
swModel = (ModelDoc2)iswApp.ActiveDoc;
swModel.ClearSelection2(true);
Debug.Print("File = " + swModel.GetPathName());
txtPath.Text = swModel.GetPathName();
this.Text = System.IO.Path.GetFileName(txtPath.Text);
switch (swModel.GetType())
{
case (int)swDocumentTypes_e.swDocPART:
swPart = (PartDoc)swModel;
// Solid bodies
object[] vBodyArr = null;
Body2 swBody = default(Body2);
MathTransform swMathTrans = null;
vBodyArr = (object[])swPart.GetBodies2((int)swBodyType_e.swSolidBody, true);
if ((vBodyArr != null))
{
// Debug.Print(" Number of solid bodies: " + vBodyArr.Length);
foreach (object vBody_loopVariable in vBodyArr)
{
vBody = vBody_loopVariable;
swBody = (Body2)vBody;
string[] vConfigName = null;
vConfigName = (string[])swModel.GetConfigurationNames();
string sMatDB = "";
string sMatName = swBody.GetMaterialPropertyName("", out sMatDB);
//bRet = swBody.RemoveMaterialProperty((int)swInConfigurationOpts_e.swAllConfiguration, (vConfigName));
// Debug.Print("Body--> " + swBody.Name + " " + "");
FeatureType Ftype = 0;
var childFeature = (object[])swBody.GetFeatures();
foreach (var item in childFeature)
{
Feature f = (Feature)item;
Debug.Print(swBody.Name + "-->" + f.GetTypeName());
if (f.GetTypeName() == "MoveCopyBody")
{
Ftype = FeatureType.Copy;
}
if (f.GetTypeName() == "MirrorSolid")
{
Ftype = FeatureType.Mirror;
}
}
Body2 swOriBody = null;
string swOriBodyName = "";
string swOriBodyBox = "";
if (Ftype != 0)
{
try
{
swOriBody = swBody.GetOriginalPatternedBody(out swMathTrans);
swOriBodyName = swOriBody.Name;
swOriBodyBox = GetBodyBox(swOriBody);
}
catch (Exception)
{
}
}
string bbox = GetBodyBox(swBody);
BodyModel tempBodyM = new BodyModel(swBody.Name, sMatName, swOriBodyName, Ftype, bbox);
if (bbox == swOriBodyBox && swBody.Name.ToString().Contains(swOriBodyName.ToString()) == false)
{
if ((int)tempBodyM.featureT == 0)
{
listBodies_Normally.Items.Add(tempBodyM.name);
}
else if ((int)tempBodyM.featureT == 1 && tempBodyM.name.Contains("镜向") == true) //mirror
{
listBodies_MirrorCopy.Items.Add(tempBodyM.name + "<--M--" + tempBodyM.refBodyname);
tempBodyM.comment = "镜向-" + tempBodyM.refBodyname;
//tempBodyM.name = "镜像-" + tempBodyM.refBodyname + "-" ;
}
else if ((int)tempBodyM.featureT == 2 && (tempBodyM.name.Contains("复制") == true || tempBodyM.name.Contains("阵列") == true)) //copy
{
listBodies_MirrorCopy.Items.Add(tempBodyM.name + "<--C--" + tempBodyM.refBodyname);
tempBodyM.comment = "复制-" + tempBodyM.refBodyname;
}
}
else
{
listBodies_Normally.Items.Add(tempBodyM.name);
}
bodyModels.Add(tempBodyM);
}
}
break;
case (int)swDocumentTypes_e.swDocASSEMBLY:
//ProcessAssembly(swApp, swModel);
break;
default:
return;
}
Debug.Print(bodyModels.Count.ToString());
}