public Sim_TransformerWinding(string Name, Sim_Transformer Transformer, Sim_Bus Bus, Sim_Company Owner, Sim_Company Operator, bool IsPrimary, Sim_Builder Builder)
{
this.Name = Name;
this.TEID = Builder.NextTEID();
this.Owner = Owner;
this.Operator = Operator;
this.Bus = Bus;
this.IsPrimary = IsPrimary;
this.Transformer = Transformer;
this.Substation = Transformer.Substation;
this.WindingNodeTEID = Builder.NextTEID();
}
public Sim_Load(String Name, Sim_Substation Parent, Sim_Bus Bus, double MW_Est, double MVAR_Est, Sim_Builder Builder)
{
this.Substation = Parent;
this.ElemGuid = Guid.NewGuid();
this.Substation.Elements.Add(this);
this.Name = Name;
this.MW_Est = MW_Est;
this.MVAR_Est = MVAR_Est;
this.Owner = Builder.GetOwner();
this.Operator = Builder.GetOperator();
this.TEID = Builder.NextTEID();
this.Bus = Bus;
}
public Sim_Breaker(String Name, Sim_Substation Sub, Sim_Bus NearBus, Sim_Bus FarBus, Sim_Builder Builder, bool Open, bool IsBreaker)
{
this.Name = Name;
this.ElemGuid = Guid.NewGuid();
this.IsBreaker = IsBreaker;
this.Substation = Sub;
this.NearBus = NearBus;
this.FarBus = FarBus;
this.Owner = Builder.GetOwner();
this.Operator = Builder.GetOperator();
this.TEID = Builder.NextTEID();
this.Open = Open;
this.Substation.Elements.Add(this);
}
public Sim_ShuntCompensator(String Name, Sim_Substation Sub, Sim_Bus Bus, bool Open, double MVAR_Est, double MVAR_Nominal, bool IsCapacitor, Sim_Builder Builder)
{
this.Name = Name;
this.Substation = Sub;
this.Bus = Bus;
this.Owner = Builder.GetOwner();
this.Operator = Builder.GetOperator();
this.TEID = Builder.NextTEID();
this.Open = Open;
this.Nominal_MVAR = MVAR_Nominal;
Sub.Elements.Add(this);
this.Estimated_MVAR = MVAR_Est;
this.IsCapacitor = IsCapacitor;
this.ElemGuid = Guid.NewGuid();
}
public Sim_Unit(String Name, Sim_Bus Bus, Sim_Substation Parent, Sim_UnitType UnitType, double MW_Est, double MVAR_Est, double PercentageCapacity, Sim_Builder Builder)
{
this.Substation = Parent;
this.Substation.Elements.Add(this);
this.ElemGuid = Guid.NewGuid();
this.Name = Name;
this.UnitType = UnitType;
this.MW_Est = MW_Est;
this.MVAR_Est = MVAR_Est;
this.LMP = Builder.NextRandom(2, 50);
this.MVA_Est = Math.Round(Math.Sqrt(MW_Est * MW_Est + MVAR_Est * MVAR_Est));
this.Capacity = this.MW_Est / PercentageCapacity;
this.TEID = Builder.NextTEID();
this.UnitTEID = Builder.NextTEID();
this.Owner = Builder.GetOwner();
this.Operator = Builder.GetOperator();
this.Bus = Bus;
}
public Sim_Line(Sim_Substation From, Sim_Substation To, List <Sim_Line> Lines, Sim_Builder Builder, double MW_Est, double MVAR_Est, double LineLoading)
{
this.ElemGuid = Guid.NewGuid();
this.From = From;
this.To = To;
this.Name = "Line" + Lines.Count.ToString("000");
this.MW_Est = MW_Est;
this.MVAR_Est = MVAR_Est;
this.MVA_Est = Math.Sqrt(MW_Est * MW_Est + MVAR_Est * MVAR_Est);
this.NormalLimit = this.MVA_Est / LineLoading;
this.EmergencyLimit = this.NormalLimit + Builder.Randomizer.Next(10);
this.LoadshedLimit = this.EmergencyLimit + Builder.Randomizer.Next(10);
this.Owner = Builder.GetOwner();
this.Operator = Builder.GetOperator();
this.TEID = Builder.NextTEID();
this.From.Elements.Add(this);
this.To.Elements.Add(this);
this.NearBus = From.FindBus(Builder);
this.FarBus = To.FindBus(Builder, this.NearBus.Voltage);
}
/// <summary>
/// Locate a bus
/// </summary>
/// <param name="Builder"></param>
/// <param name="RequiredVoltages"></param>
/// <returns></returns>
public Sim_Bus FindBus(Sim_Builder Builder, params Sim_VoltageLevel[] RequiredVoltages)
{
List <Sim_Bus> BusCandidates = new List <Sim_Bus>();
foreach (Sim_Bus Bus in this.Elements.OfType <Sim_Bus>())
{
if (RequiredVoltages.Length == 0 || Array.IndexOf(RequiredVoltages, Bus.Voltage) != -1)
{
BusCandidates.Add(Bus);
}
}
//If we don't have a bus of the proper voltage, create it.
if (RequiredVoltages.Length > 0 && BusCandidates.Count == 0)
{
Sim_Bus NewBus = new Sim_Bus(this, Builder.Buses.Count, "Bus" + Builder.Buses.Count.ToString(), Builder.Randomizer.GenerateNumber(1, Builder.Config.BusVoltageStdDev / 100.0), Builder);
Builder.Buses.Add(NewBus);
BusCandidates.Add(NewBus);
}
return(BusCandidates[Builder.Randomizer.Next(0, BusCandidates.Count)]);
}
/// <summary>
/// Build our simulated model
/// </summary>
/// <param name="Config"></param>
public Sim_Builder(Sim_Builder_Configuration Config, String SubstationText)
{
this.Config = Config;
//Start by building our companies
for (int a = 0; a < Config.CompanyCount; a++)
{
Companies.Add(new Sim_Company("Company" + a.ToString(), "TCOM" + a.ToString(), "-Unknown-", "-Unknown-", this));
}
//Add in our voltage levels
Voltages.Add(new Sim_VoltageLevel(345));
Voltages.Add(new Sim_VoltageLevel(230));
Voltages.Add(new Sim_VoltageLevel(138));
Voltages.Add(new Sim_VoltageLevel(69));
//Add in our unit types
UnitTypes.Add(new Sim_UnitType("NuclearGeneratingUnit"));
UnitTypes.Add(new Sim_UnitType("ThermalGeneratingUnit"));
UnitTypes.Add(new Sim_UnitType("WindGeneratingUnit"));
//Add in our county and state boundaries
if (Config.BaseModel != null)
{
LoadModel(Config.BaseModel);
}
else
{
LoadBoundary(Config.CountyBoundary, true);
LoadBoundary(Config.StateBoundary, false);
}
//Now, add in our substations
AddSubstations(Config.SubstationCount, SubstationText);
//Now, for each sub, add our buses and breakers
foreach (Sim_Substation Sub in Subs)
{
Sim_Bus NewBus = new Sim_Bus(Sub, Buses.Count, "Bus" + Buses.Count.ToString("000"), Randomizer.GenerateNumber(1, Config.BusVoltageStdDev / 100.0), this);
Buses.Add(NewBus);
bool IsOpen = NextRandom(0, 1) > 0.5;
bool IsBreaker = NextRandom(0, 1) > 0.5;
if (!IsOpen)
{
Breakers.Add(new Sim_Breaker((IsBreaker ? "Breaker" : "Switch") + Breakers.Count.ToString("000"), Sub, NewBus, NewBus, this, false, IsBreaker));
}
else
{
Sim_Bus FarBus = new Sim_Bus(Sub, Buses.Count, "Bus" + Buses.Count.ToString("000"), Randomizer.GenerateNumber(1, Config.BusVoltageStdDev / 100.0), this);
FarBus.Voltage = NewBus.Voltage;
Buses.Add(FarBus);
Breakers.Add(new Sim_Breaker((IsBreaker ? "Breaker" : "Switch") + Breakers.Count.ToString("000"), Sub, NewBus, FarBus, this, true, IsBreaker));
}
}
//Now, add in our lines
foreach (Sim_Substation FromSub in Subs)
{
if (Randomizer.NextDouble() < Config.LineProbability)
{
Sim_Substation ToSub = FromSub.FindNearbySubstation(Subs, Config.LineDistance, Lines, this);
if (ToSub != null && !FromSub.ConnectedSubstations(Lines).ContainsKey(ToSub))
{
Lines.Add(new Sim_Line(FromSub, ToSub, Lines, this, Randomizer.GenerateNumber(Config.LineMW), Randomizer.GenerateNumber(Config.LineMW) * 0.3, Math.Abs(Randomizer.GenerateNumber(Config.LineLoad) / 100.0)));
}
}
}
//Add in our shunt compensators, reactors and loads
foreach (Sim_Substation Sub in Subs)
{
while (Randomizer.NextDouble() < Config.CapacitorProbability)
{
double MVAR = Randomizer.GenerateNumber(Config.CapacitorMVAR);
bool IsOpen = Randomizer.NextDouble() >= Config.CapacitorOpenProbability;
ShuntCompensators.Add(new Sim_ShuntCompensator("Cap" + ShuntCompensators.Count.ToString("000"), Sub, Sub.FindBus(this), IsOpen, (IsOpen ? 0 : MVAR), MVAR, true, this));
}
while (Randomizer.NextDouble() < Config.ReactorProbability)
{
double MVAR = Randomizer.GenerateNumber(Config.ReactorMVAR);
bool IsOpen = Randomizer.NextDouble() >= Config.ReactorOpenProbability;
ShuntCompensators.Add(new Sim_ShuntCompensator("Reac" + ShuntCompensators.Count.ToString("000"), Sub, Sub.FindBus(this), IsOpen, (IsOpen ? 0 : MVAR), MVAR, false, this));
}
while (Randomizer.NextDouble() < Config.UnitProbability)
{
Sim_Bus FoundGenBus;
if (Randomizer.NextDouble() > 0.25)
{
FoundGenBus = Sub.FindBus(this, GenVoltage);
}
else
{
FoundGenBus = Sub.FindBus(this);
}
Units.Add(new Sim_Unit("Unit" + Units.Count.ToString("000"), FoundGenBus, Sub, UnitTypes[Randomizer.Next(0, UnitTypes.Count)], Randomizer.GenerateNumber(Config.UnitMW), Randomizer.GenerateNumber(Config.UnitMW) * 0.25, Randomizer.GenerateNumber(Config.UnitCapacity), this));
}
while (Randomizer.NextDouble() < Config.LoadProbability)
{
Loads.Add(new Sim_Load("Load" + Loads.Count.ToString("000"), Sub, Sub.FindBus(this), Randomizer.GenerateNumber(Config.LoadMW), Randomizer.GenerateNumber(Config.LoadMW) * 0.25, this));
}
}
//Now, add any transformers within substations with different voltages
foreach (Sim_Substation Sub in Subs)
{
Dictionary <Sim_VoltageLevel, List <Sim_Bus> > Voltages = new Dictionary <Sim_VoltageLevel, List <Sim_Bus> >();
foreach (Sim_Bus Bus in Sub.Elements.OfType <Sim_Bus>())
{
if (!Voltages.ContainsKey(Bus.Voltage))
{
Voltages.Add(Bus.Voltage, new List <Sim_Bus>());
}
Voltages[Bus.Voltage].Add(Bus);
}
for (int a = 0; a < Voltages.Count - 1; a++)
{
//Create a transformer between two of our voltages
Sim_VoltageLevel Volt1 = Voltages.Keys.ToArray()[0];
Sim_VoltageLevel Volt2 = Voltages.Keys.ToArray()[1];
Sim_Bus Bus1 = Voltages[Volt1][Randomizer.Next(0, Voltages[Volt1].Count)];
Sim_Bus Bus2 = Voltages[Volt2][Randomizer.Next(0, Voltages[Volt2].Count)];
Sim_Transformer NewXf = new Sim_Transformer("XF" + Transformers.Count.ToString("000"), Sub, Randomizer.GenerateNumber(Config.TransformerMW), Randomizer.GenerateNumber(Config.TransformerMW) * 0.25, Bus1, Bus2, this);
Transformers.Add(NewXf);
}
}
}
/// <summary>
/// Generate our one-line
/// </summary>
/// <param name="Substation"></param>
/// <param name="TargetDirectory"></param>
/// <returns></returns>
public void GenerateOneLine(Sim_Substation Substation, String TargetDirectory)
{
//First, build our list of buses and connected equipment
Dictionary <Sim_Bus, List <Sim_Element> > Elements = new Dictionary <Sim_Bus, List <Sim_Element> >();
Dictionary <Sim_Bus, int> ElementRight = new Dictionary <Sim_Bus, int>();
foreach (Sim_Bus Bus in Substation.Elements.OfType <Sim_Bus>())
{
Elements.Add(Bus, new List <Sim_Element>());
}
foreach (Sim_Element Elem in Substation.Elements)
{
if (Elem is Sim_Transformer)
{
Sim_TransformerWinding Winding1 = ((Sim_Transformer)Elem).Winding1;
Sim_TransformerWinding Winding2 = ((Sim_Transformer)Elem).Winding2;
if (Elements.ContainsKey(Winding1.Bus) && !Elements[Winding1.Bus].Contains(Winding1))
{
Elements[Winding1.Bus].Add(Winding1);
}
if (Elements.ContainsKey(Winding2.Bus) && !Elements[Winding2.Bus].Contains(Winding2))
{
Elements[Winding2.Bus].Add(Winding2);
}
}
else if (Elem is Sim_Bus == false)
{
Sim_Bus Bus = Elem.GetBuses()[0];
if (Elements.ContainsKey(Bus) && !Elements[Bus].Contains(Elem))
{
Elements[Bus].Add(Elem);
}
}
}
using (StreamWriter sW = new StreamWriter(Path.Combine(Config.OneLineFolder, Substation.Name + ".MM_OneLine"), false, new UTF8Encoding(false)))
{
sW.WriteLine("<?xml version=\"1.0\" encoding=\"utf-8\" standalone=\"yes\"?>");
sW.WriteLine($"<One_Line BaseElement.ElemType=\"Substation\" BaseElement.TEID=\"{Substation.TEID}\" BaseElement.ConnectedLines=\"\" BaseElement.County=\"{Substation.Parent.Name}\" BaseElement.DisplayName=\"{Substation.Name}\" BaseElement.{Substation.ElemTypes} BaseElement.{Substation.KVLevels} BaseElement.Latitude=\"{Substation.Latitude}\" BaseElement.LatLong=\"{Substation.Latitude},{Substation.Longitude}\" BaseElement.Longitude=\"{Substation.Longitude}\" BaseElement.Operator=\"{Substation.Operator.TEID}\" BaseElement.Owner=\"{Substation.Owner.TEID}\" BaseElement.Permitted=\"true\" Font=\"Microsoft Sans Serif, 8.25pt\" BaseElement.Name=\"{Substation.Name}\" BaseElement.LongName=\"{Substation.Name}\">");
//Now, determine the Y coordinate of the bus
int YVal = 50;
foreach (Sim_Bus Bus in Elements.Keys)
{
Bus.Y = YVal;
YVal += 50;
}
sW.WriteLine("<Elements>");
foreach (KeyValuePair <Sim_Bus, List <Sim_Element> > kvp in Elements)
{
int XVal = 50;
foreach (Sim_Element Elem in kvp.Value)
{
if (Elem is Sim_TransformerWinding)
{
sW.WriteLine(((Sim_TransformerWinding)Elem).Transformer.GetOneLineXml(ref XVal, kvp.Key.Y));
}
else
{
sW.WriteLine(Elem.GetOneLineXml(ref XVal, kvp.Key.Y));
}
}
ElementRight.Add(kvp.Key, XVal);
}
sW.WriteLine("</Elements>");
sW.WriteLine("<Nodes>");
foreach (Sim_Bus Bus in Elements.Keys)
{
int XVal = 25;
Bus.XWidth = ElementRight[Bus];
sW.WriteLine(Bus.GetOneLineXml(ref XVal, Bus.Y));
}
sW.WriteLine("</Nodes>");
sW.WriteLine("</One_Line>");
}
}
/// <summary>
/// Initialize a new transformer
/// </summary>
/// <param name="Name"></param>
/// <param name="Sub"></param>
/// <param name="MW_Est"></param>
/// <param name="MVAR_Est"></param>
/// <param name="Bus1"></param>
/// <param name="Bus2"></param>
/// <param name="Builder"></param>
public Sim_Transformer(String Name, Sim_Substation Sub, double MW_Est, double MVAR_Est, Sim_Bus Bus1, Sim_Bus Bus2, Sim_Builder Builder)
{
this.Name = Name;
this.Substation = Sub;
this.ElemGuid = Guid.NewGuid();
this.Substation.Elements.Add(this);
this.Owner = Builder.GetOwner();
this.Operator = Builder.GetOperator();
this.MW_Est = MW_Est;
this.MVAR_Est = MVAR_Est;
this.TEID = Builder.NextTEID();
this.Winding1 = new Sim_TransformerWinding(Name + "_1", this, Bus1, Owner, Operator, true, Builder);
this.Winding2 = new Sim_TransformerWinding(Name + "_2", this, Bus2, Owner, Operator, false, Builder);
}
