/// <summary>
/// 使用ICD文件初始化平面线形.
/// </summary>
/// <param name="icdfile">icd文件</param>
public PM(string icdfile)
{
// 初始化节点
ICDList = new List <ICD>();
string[] altext = File.ReadAllLines(icdfile);
for (int i = 0; i < altext.Count(); i++)
{
string line = altext[i];
if (i == 0)
{
StartPK = double.Parse(line);
}
else if (i == 1)
{
var xx = Regex.Split(line, ",");
StartX = double.Parse(xx[0]);
StartY = double.Parse(xx[1]);
StartAngInDeg = double.Parse(xx[2]);
}
else
{
var xx = Regex.Split(line, ",");
if (line.StartsWith("//"))
{
// 注释
continue;
}
else if (xx.Count() == 3 && int.Parse(xx[2]) == 0)
{
// 结束
break;
}
else
{
ICD aa = new ICD(line);
ICDList.Add(aa);
}
}
}
}
private static void AddICD(ref Alignment myAg, ref SRBA.PM bill, ref Editor ed)
{
double curAngInDeg = bill.StartAngInDeg;
Point3d St = new Point3d(bill.StartY, bill.StartX, 0);
Point3d Ed, TmpPt;
//AlignmentLine RefStartLine;
//AlignmentArc curArc;
AlignmentSpiral curSpiral;
for (int i = 0; i < bill.ICDList.Count; i++)
{
SRBA.ICD item = bill.ICDList[i];
switch (item.TypeID)
{
case 1:
Ed = new Point3d(St.X + Math.Sin(curAngInDeg) * item.Length, St.Y + Math.Cos(curAngInDeg) * item.Length, 0);
AlignmentLine l = myAg.Entities.AddFixedLine(St, Ed);
St = Ed;
curAngInDeg = l.Direction;
break;
case 2:
if (myAg.Entities.LastEntity != 0)
{
AlignmentArc a = myAg.Entities.AddFloatingCurve(myAg.Entities.LastEntity, item.R, item.Length, CurveParamType.CurveLength, item.isClookWise);
Ed = new Point3d(a.EndPoint.X, a.EndPoint.Y, 0);
myAg.Entities.Remove(a);
AlignmentArc b = myAg.Entities.AddFixedCurve(St, Ed, item.R, item.isClookWise);
St = Ed;
curAngInDeg = b.EndDirection;
}
else
{
Ed = new Point3d(St.X - Math.Sin(curAngInDeg) * 10, St.Y - Math.Cos(curAngInDeg) * 10, 0);
AlignmentLine ll = myAg.Entities.AddFixedLine(Ed, St);
AlignmentArc a = myAg.Entities.AddFloatingCurve(myAg.Entities.LastEntity, item.R, item.Length, CurveParamType.CurveLength, item.isClookWise);
Ed = new Point3d(a.EndPoint.X, a.EndPoint.Y, 0);
myAg.Entities.Remove(a);
AlignmentArc b = myAg.Entities.AddFixedCurve(St, Ed, item.R, item.isClookWise);
St = Ed;
curAngInDeg = b.EndDirection;
myAg.Entities.Remove(ll);
}
break;
case 3:
if (myAg.Entities.LastEntity != 0)
{
AlignmentLine tp = myAg.Entities.AddFloatingLine(myAg.Entities.LastEntity, 10.0);
Point3d spii = new Point3d(tp.EndPoint.X, tp.EndPoint.Y, 0);
myAg.Entities.Remove(tp);
AlignmentSpiral s = myAg.Entities.AddFixedSpiral(myAg.Entities.LastEntity, St, spii, item.EndR, item.Length, SpiralCurveType.InCurve, item.isClookWise, SpiralType.Clothoid);
Ed = new Point3d(s.EndPoint.X, s.EndPoint.Y, 0);
St = Ed;
curAngInDeg = s.EndDirection;
}
else
{
TmpPt = new Point3d(St.X + Math.Sin(curAngInDeg) * 10, St.Y + Math.Cos(curAngInDeg) * 10, 0);
curSpiral = myAg.Entities.AddFixedSpiral(-1, St, TmpPt, item.EndR, item.Length, SpiralCurveType.InCurve, item.isClookWise, SpiralType.Clothoid);
Ed = new Point3d(curSpiral.EndPoint.X, curSpiral.EndPoint.Y, 0);
St = Ed;
curAngInDeg = curSpiral.EndDirection;
}
break;
case 4:
if (myAg.Entities.LastEntity != 0)
{
AlignmentLine tmp = myAg.Entities.AddFloatingLine(myAg.Entities.LastEntity, 10.0);
Point3d SPI = new Point3d(tmp.EndPoint.X, tmp.EndPoint.Y, 0);
myAg.Entities.Remove(tmp);
AlignmentSpiral sp = myAg.Entities.AddFixedSpiral(myAg.Entities.LastEntity, St, SPI,
item.StartR, item.Length, SpiralCurveType.OutCurve, item.isClookWise, Autodesk.Civil.SpiralType.Clothoid);
Ed = new Point3d(sp.EndPoint.X, sp.EndPoint.Y, 0);
St = Ed;
curAngInDeg = sp.EndDirection;
}
else
{
TmpPt = new Point3d(St.X + Math.Sin(curAngInDeg) * 10, St.Y + Math.Cos(curAngInDeg) * 10, 0);
curSpiral = myAg.Entities.AddFixedSpiral(-1, St, TmpPt, item.StartR, item.Length, SpiralCurveType.OutCurve, item.isClookWise, SpiralType.Clothoid);
Ed = new Point3d(curSpiral.EndPoint.X, curSpiral.EndPoint.Y, 0);
St = Ed;
curAngInDeg = curSpiral.EndDirection;
}
break;
case 5:
AlignmentLine tt5 = myAg.Entities.AddFloatingLine(myAg.Entities.LastEntity, 10.0);
Point3d Sip5 = new Point3d(tt5.EndPoint.X, tt5.EndPoint.Y, 0);
myAg.Entities.Remove(tt5);
AlignmentSpiral ss5 = myAg.Entities.AddFixedSpiral(myAg.Entities.LastEntity, St, Sip5, item.StartR, item.EndR, item.Length, item.isClookWise, Autodesk.Civil.SpiralType.Clothoid);
Ed = new Point3d(ss5.EndPoint.X, ss5.EndPoint.Y, 0);
St = Ed;
curAngInDeg = ss5.EndDirection;
break;
case 6: //R小-R大
if (myAg.Entities.LastEntity != 0)
{
AlignmentLine tt = myAg.Entities.AddFloatingLine(myAg.Entities.LastEntity, 10.0);
Point3d Sip = new Point3d(tt.EndPoint.X, tt.EndPoint.Y, 0);
myAg.Entities.Remove(tt);
AlignmentSpiral ss = myAg.Entities.AddFixedSpiral(myAg.Entities.LastEntity, St, Sip, item.StartR, item.EndR, item.Length, item.isClookWise, Autodesk.Civil.SpiralType.Clothoid);
Ed = new Point3d(ss.EndPoint.X, ss.EndPoint.Y, 0);
St = Ed;
curAngInDeg = ss.EndDirection;
}
else
{
TmpPt = new Point3d(St.X + Math.Sin(curAngInDeg) * 10, St.Y + Math.Cos(curAngInDeg) * 10, 0);
curSpiral = myAg.Entities.AddFixedSpiral(-1, St, TmpPt, item.StartR, item.EndR, item.Length, item.isClookWise, Autodesk.Civil.SpiralType.Clothoid);
Ed = new Point3d(curSpiral.EndPoint.X, curSpiral.EndPoint.Y, 0);
St = Ed;
curAngInDeg = curSpiral.EndDirection;
}
break;
default:
break;
}
}
}
