Example #1
0
 /// <summary>
 /// 使用ICD文件初始化平面线形.
 /// </summary>
 /// <param name="icdfile">icd文件</param>
 public PM(string icdfile)
 {
     // 初始化节点
     ICDList = new List <ICD>();
     string[] altext = File.ReadAllLines(icdfile);
     for (int i = 0; i < altext.Count(); i++)
     {
         string line = altext[i];
         if (i == 0)
         {
             StartPK = double.Parse(line);
         }
         else if (i == 1)
         {
             var xx = Regex.Split(line, ",");
             StartX        = double.Parse(xx[0]);
             StartY        = double.Parse(xx[1]);
             StartAngInDeg = double.Parse(xx[2]);
         }
         else
         {
             var xx = Regex.Split(line, ",");
             if (line.StartsWith("//"))
             {
                 // 注释
                 continue;
             }
             else if (xx.Count() == 3 && int.Parse(xx[2]) == 0)
             {
                 // 结束
                 break;
             }
             else
             {
                 ICD aa = new ICD(line);
                 ICDList.Add(aa);
             }
         }
     }
 }
Example #2
0
        private static void AddICD(ref Alignment myAg, ref SRBA.PM bill, ref Editor ed)
        {
            double  curAngInDeg = bill.StartAngInDeg;
            Point3d St = new Point3d(bill.StartY, bill.StartX, 0);
            Point3d Ed, TmpPt;

            //AlignmentLine RefStartLine;
            //AlignmentArc curArc;
            AlignmentSpiral curSpiral;

            for (int i = 0; i < bill.ICDList.Count; i++)
            {
                SRBA.ICD item = bill.ICDList[i];
                switch (item.TypeID)
                {
                case 1:
                    Ed = new Point3d(St.X + Math.Sin(curAngInDeg) * item.Length, St.Y + Math.Cos(curAngInDeg) * item.Length, 0);
                    AlignmentLine l = myAg.Entities.AddFixedLine(St, Ed);
                    St          = Ed;
                    curAngInDeg = l.Direction;
                    break;

                case 2:
                    if (myAg.Entities.LastEntity != 0)
                    {
                        AlignmentArc a = myAg.Entities.AddFloatingCurve(myAg.Entities.LastEntity, item.R, item.Length, CurveParamType.CurveLength, item.isClookWise);
                        Ed = new Point3d(a.EndPoint.X, a.EndPoint.Y, 0);
                        myAg.Entities.Remove(a);
                        AlignmentArc b = myAg.Entities.AddFixedCurve(St, Ed, item.R, item.isClookWise);
                        St          = Ed;
                        curAngInDeg = b.EndDirection;
                    }
                    else
                    {
                        Ed = new Point3d(St.X - Math.Sin(curAngInDeg) * 10, St.Y - Math.Cos(curAngInDeg) * 10, 0);
                        AlignmentLine ll = myAg.Entities.AddFixedLine(Ed, St);
                        AlignmentArc  a  = myAg.Entities.AddFloatingCurve(myAg.Entities.LastEntity, item.R, item.Length, CurveParamType.CurveLength, item.isClookWise);
                        Ed = new Point3d(a.EndPoint.X, a.EndPoint.Y, 0);
                        myAg.Entities.Remove(a);
                        AlignmentArc b = myAg.Entities.AddFixedCurve(St, Ed, item.R, item.isClookWise);
                        St          = Ed;
                        curAngInDeg = b.EndDirection;
                        myAg.Entities.Remove(ll);
                    }
                    break;

                case 3:
                    if (myAg.Entities.LastEntity != 0)
                    {
                        AlignmentLine tp   = myAg.Entities.AddFloatingLine(myAg.Entities.LastEntity, 10.0);
                        Point3d       spii = new Point3d(tp.EndPoint.X, tp.EndPoint.Y, 0);
                        myAg.Entities.Remove(tp);
                        AlignmentSpiral s = myAg.Entities.AddFixedSpiral(myAg.Entities.LastEntity, St, spii, item.EndR, item.Length, SpiralCurveType.InCurve, item.isClookWise, SpiralType.Clothoid);
                        Ed          = new Point3d(s.EndPoint.X, s.EndPoint.Y, 0);
                        St          = Ed;
                        curAngInDeg = s.EndDirection;
                    }
                    else
                    {
                        TmpPt       = new Point3d(St.X + Math.Sin(curAngInDeg) * 10, St.Y + Math.Cos(curAngInDeg) * 10, 0);
                        curSpiral   = myAg.Entities.AddFixedSpiral(-1, St, TmpPt, item.EndR, item.Length, SpiralCurveType.InCurve, item.isClookWise, SpiralType.Clothoid);
                        Ed          = new Point3d(curSpiral.EndPoint.X, curSpiral.EndPoint.Y, 0);
                        St          = Ed;
                        curAngInDeg = curSpiral.EndDirection;
                    }

                    break;

                case 4:

                    if (myAg.Entities.LastEntity != 0)
                    {
                        AlignmentLine tmp = myAg.Entities.AddFloatingLine(myAg.Entities.LastEntity, 10.0);
                        Point3d       SPI = new Point3d(tmp.EndPoint.X, tmp.EndPoint.Y, 0);
                        myAg.Entities.Remove(tmp);
                        AlignmentSpiral sp = myAg.Entities.AddFixedSpiral(myAg.Entities.LastEntity, St, SPI,
                                                                          item.StartR, item.Length, SpiralCurveType.OutCurve, item.isClookWise, Autodesk.Civil.SpiralType.Clothoid);
                        Ed          = new Point3d(sp.EndPoint.X, sp.EndPoint.Y, 0);
                        St          = Ed;
                        curAngInDeg = sp.EndDirection;
                    }
                    else
                    {
                        TmpPt       = new Point3d(St.X + Math.Sin(curAngInDeg) * 10, St.Y + Math.Cos(curAngInDeg) * 10, 0);
                        curSpiral   = myAg.Entities.AddFixedSpiral(-1, St, TmpPt, item.StartR, item.Length, SpiralCurveType.OutCurve, item.isClookWise, SpiralType.Clothoid);
                        Ed          = new Point3d(curSpiral.EndPoint.X, curSpiral.EndPoint.Y, 0);
                        St          = Ed;
                        curAngInDeg = curSpiral.EndDirection;
                    }

                    break;

                case 5:
                    AlignmentLine tt5  = myAg.Entities.AddFloatingLine(myAg.Entities.LastEntity, 10.0);
                    Point3d       Sip5 = new Point3d(tt5.EndPoint.X, tt5.EndPoint.Y, 0);
                    myAg.Entities.Remove(tt5);
                    AlignmentSpiral ss5 = myAg.Entities.AddFixedSpiral(myAg.Entities.LastEntity, St, Sip5, item.StartR, item.EndR, item.Length, item.isClookWise, Autodesk.Civil.SpiralType.Clothoid);
                    Ed          = new Point3d(ss5.EndPoint.X, ss5.EndPoint.Y, 0);
                    St          = Ed;
                    curAngInDeg = ss5.EndDirection;
                    break;

                case 6:    //R小-R大

                    if (myAg.Entities.LastEntity != 0)
                    {
                        AlignmentLine tt  = myAg.Entities.AddFloatingLine(myAg.Entities.LastEntity, 10.0);
                        Point3d       Sip = new Point3d(tt.EndPoint.X, tt.EndPoint.Y, 0);
                        myAg.Entities.Remove(tt);
                        AlignmentSpiral ss = myAg.Entities.AddFixedSpiral(myAg.Entities.LastEntity, St, Sip, item.StartR, item.EndR, item.Length, item.isClookWise, Autodesk.Civil.SpiralType.Clothoid);
                        Ed          = new Point3d(ss.EndPoint.X, ss.EndPoint.Y, 0);
                        St          = Ed;
                        curAngInDeg = ss.EndDirection;
                    }

                    else
                    {
                        TmpPt       = new Point3d(St.X + Math.Sin(curAngInDeg) * 10, St.Y + Math.Cos(curAngInDeg) * 10, 0);
                        curSpiral   = myAg.Entities.AddFixedSpiral(-1, St, TmpPt, item.StartR, item.EndR, item.Length, item.isClookWise, Autodesk.Civil.SpiralType.Clothoid);
                        Ed          = new Point3d(curSpiral.EndPoint.X, curSpiral.EndPoint.Y, 0);
                        St          = Ed;
                        curAngInDeg = curSpiral.EndDirection;
                    }



                    break;

                default:
                    break;
                }
            }
        }