/// <summary>
/// Расчет обработки
/// </summary>
public static List <ProcessingAction> Generate(IEnumerable <ProcessObject> processObjects, List <Curve> sectionCurves)
{
try
{
IsCalculation = true;
AutocadUtils.StartTransaction();
Machine.Start();
foreach (var processObject in processObjects)
{
if (!IsCalculation)
{
break;
}
if (!CheckParams(processObject))
{
continue;
}
Machine.SetTool(processObject.Tool);
if (processObject.Curve.OutsideSign == 0)
{
CalcUtils.CalcOutside(processObject.Curve);
}
var curve = AutocadUtils.GetCurve(processObject.Curve.ObjectId);
if (Settings.ProcessMode == ProcessMode.ContinuousDescent)
{
if (!curve.Closed)
{
throw new Exception("Расчет в режиме непрерывного опускания возможен только для замкнутой кривой");
}
CuttingContinuousDescent(processObject, curve);
}
else if (Settings.ProcessMode == ProcessMode.ProfileDisc)
{
CuttingProfileDisc(processObject, curve, sectionCurves);
}
else
{
Cutting(processObject, curve);
}
}
Machine.Stop();
AutocadUtils.CommitTransaction();
}
catch (Exception e)
{
Machine.Clear();
var error = String.Format("Ошибка при расчете обработки: {0}", e.Message);
AutocadUtils.ShowError(error);
}
AutocadUtils.DisposeTransaction();
IsCalculation = false;
return(Machine.GetProcessingActions());
}
private static void Retract(Curve toolpathCurve, int direction, int outsideSign, ProcessingParams par)
{
if (par.RetractionType == FeedType.None)
{
return;
}
var feedGroup = CalcUtils.CalcFeedGroup(toolpathCurve, direction == -1, outsideSign, par.RetractionType, par.RetractionRadius, par.RetractionAngle, par.RetractionLength);
Machine.RetractMove(feedGroup.Arc, par.GreatSpeed);
if (Settings.WithCompensation)
{
Machine.SetCompensation(CompensationSide.None);
}
Machine.RetractMove(feedGroup.Line, par.GreatSpeed);
}
private static void CuttingProfileDisc(ProcessObject processObject, Curve curve, List <Curve> sectionCurves)
{
if (sectionCurves.Count == 0)
{
AutocadUtils.ShowError("Не указано сечение");
return;
}
var par = processObject.ProcessingParams;
var z = Settings.HeightMax;
do
{
if (!IsCalculation)
{
return;
}
var d1 = CalcUtils.GetSectionDepth(sectionCurves, z);
var d2 = CalcUtils.GetSectionDepth(sectionCurves, z - processObject.Tool.Thickness.GetValueOrDefault());
double d;
if (d1.HasValue && d2.HasValue)
{
d = d1 > d2 ? d1.Value : d2.Value;
}
else if (d1.HasValue)
{
d = d1.Value;
}
else if (d2.HasValue)
{
d = d2.Value;
}
else
{
return;
}
var toolpathCurve = AutocadUtils.GetDisplacementCopy(curve, z);
AlternatingCuttingCurve(processObject, toolpathCurve, d + Settings.Pripusk);
z -= Settings.VerticalStep;
}while (z >= Settings.HeightMin);
}
private static void Feed(Curve toolpathCurve, int direction, int outsideSign, ProcessingParams par, bool isFirstPass)
{
var feedGroup = CalcUtils.CalcFeedGroup(toolpathCurve, direction == 1, outsideSign, par.FeedType, par.FeedRadius, par.FeedAngle, par.FeedLength);
if (isFirstPass)
{
Machine.SetPosition(feedGroup.Point, par.GreatSpeed);
}
else
{
Machine.Move(feedGroup.Point, par.GreatSpeed);
}
if (Settings.WithCompensation)
{
Machine.SetCompensation(direction * outsideSign == 1 ? CompensationSide.Left : CompensationSide.Right);
}
Machine.EngageMove(feedGroup.Line, par.SmallSpeed);
Machine.EngageMove(feedGroup.Arc, par.SmallSpeed);
Machine.SetSpeed(par.GreatSpeed);
}
public void Initialize()
{
AutocadUtils.WriteMessage("Инициализация плагина ProcessingProgram. Версия с режимом обработки."); // + DateTime.Today.ToShortDateString()); TODO Assemlly.DateTime()
ObjectForm.DeleteAll += (sender, args) => DeleteAll();
ObjectForm.DeleteProcessing += (sender, args) => DeleteProcessing();
ObjectForm.Calculate += (sender, args) => Calculate();
ObjectForm.Quit += (sender, args) => AutocadUtils.Close();
ObjectForm.AddObjects += (sender, args) => AddObjects();
ObjectForm.ShowTools += (sender, args) => AutocadUtils.ShowModalDialog(ToolStoreForm);
ObjectForm.CurrentChanged += (sender, args) => AutocadUtils.SelectObject(args.Data.Curve.ObjectId);
ObjectForm.ChangeOutside += (sender, args) =>
{
CalcUtils.ChangeOutside(args.Data.Curve.ObjectId);
Calculate();
};
ObjectForm.ReverseProcess += (sender, args) =>
{
args.Data.Direction *= -1;
Calculate();
};
ObjectForm.DeleteObject += (sender, args) =>
{
ProcessObjects.Remove(args.Data);
if (ProcessObjects.All(p => p.Curve != args.Data.Curve))
{
ProcessCurves.Remove(args.Data.Curve);
}
Calculate();
};
SettingForm.AddSectionObjects += (sender, args) =>
{
AddSectionObjects();
SettingForm.SetSectionDesc(SectionCurves.Any() ? String.Format("Сечение установлено. {0} элемента", SectionCurves.Count) : "");
};
AutocadUtils.AddPaletteSet("Объекты", ObjectForm);
ProcessingForm.CurrentChanged += (sender, args) => AutocadUtils.SelectObjects(args.Data.ObjectId, args.Data.ToolObjectId);
ProcessingForm.DeleteProcessing += (sender, args) => DeleteProcessing();
ProcessingForm.Calculate += (sender, args) => Calculate();
AutocadUtils.AddPaletteSet("Обработка", ProcessingForm);
AutocadUtils.AddPaletteSet("Программа", ProgramForm);
AutocadUtils.AddPaletteSet("Настройки", SettingForm);
AutocadUtils.Selected += (sender, args) => ProcessingForm.SelectObjects(args.Data);
AutocadUtils.Focused += (sender, args) => ProcessingForm.SetFocus(args.Data);
AutocadUtils.Focused += (sender, args) => ObjectForm.SetFocus(args.Data);
CalcUtils.Init(ProcessObjects, ProcessCurves);
ProcessObjectFactory.Init(ProcessObjects, ProcessCurves);
var machine = new Machine();
machine.ChangeActionsCount += (sender, args) => ObjectForm.ShowProgress(String.Format("Генерация обработки... {0} строк", args.Data));
ActionGenerator.SetMachine(machine);
//AutocadUtils.CreateTest();
//RunTest();
}