internal static void CheckPolysAreSimilar(string aGCodeFile, string bGCodeFile)
{
var aLoadedGcode = TestUtilities.LoadGCodeFile(aGCodeFile);
var bLoadedGCode = TestUtilities.LoadGCodeFile(bGCodeFile);
var aLayerCount = TestUtilities.LayerCount(aLoadedGcode);
Assert.AreEqual(aLayerCount, TestUtilities.LayerCount(bLoadedGCode));
for (int layerIndex = 0; layerIndex < aLayerCount; layerIndex++)
{
var aLayerGCode = TestUtilities.GetLayer(aLoadedGcode, layerIndex);
var bLayerGCode = TestUtilities.GetLayer(bLoadedGCode, layerIndex);
var aPolys = TestUtilities.GetExtrusionPolygonsForLayer(aLayerGCode, false);
var bPolys = TestUtilities.GetExtrusionPolygonsForLayer(bLayerGCode, false);
// Assert.AreEqual(aPolys.Count, bPolys.Count);
if (aPolys.Count > 0)
{
var aPoly = aPolys[0];
var bPoly = bPolys[0];
for (int aPointIndex = 0; aPointIndex < aPoly.Count; aPointIndex++)
{
var found = false;
for (int bPointIndex = 0; bPointIndex < bPoly.Count; bPointIndex++)
{
if ((aPoly[aPointIndex] - bPoly[bPointIndex]).Length() < 10)
{
found = true;
break;
}
}
Assert.IsTrue(found);
}
}
}
}
public void SliceFileWithLeadingLowercaseN()
{
// Stl with leading n - tests past regression due to c:\path\name.stl where \n in path breaks during stuff/unstuff behavior
string stlPath = TestUtilities.GetStlPath("name-with-leading-n");
string gcodePath = TestUtilities.GetTempGCodePath(nameof(SliceFileWithLeadingLowercaseN));
// Create config file
var configFilePath = Path.ChangeExtension(gcodePath, "ini");
using (var stream = new StreamWriter(configFilePath))
{
stream.WriteLine($"additionalArgsToProcess = -m \"1,0,0,0,0,1,0,0,0,0,1,0,5,0,0,1\" \"{stlPath}\"");
}
// Slice file
MatterSlice.ProcessArgs($"-v -o \"{gcodePath}\" -c \"{configFilePath}\"");
// Load and validate generated GCode
string[] gcode = TestUtilities.LoadGCodeFile(gcodePath);
var movement = default(MovementInfo);
// check layer 1
var layer1Info = TestUtilities.GetLayer(gcode, 1);
var layer1Polygons = TestUtilities.GetExtrusionPolygonsForLayer(layer1Info, ref movement, false);
Assert.AreEqual(2, layer1Polygons.Where(i => i.Count > 2).Count());
// check layer 2
var layer2Info = TestUtilities.GetLayer(gcode, 2);
var layer2Polygons = TestUtilities.GetExtrusionPolygonsForLayer(layer2Info, ref movement, false);
Assert.AreEqual(2, layer2Polygons.Where(i => i.Count > 2).Count());
}
public void SliceFileWithSpaceInGCodePath()
{
// GCode file with space in file name
string gcodePath = TestUtilities.GetTempGCodePath("gcode file with space");
string stlPath = TestUtilities.GetStlPath("Box Left");
// Create config file
var configFilePath = Path.ChangeExtension(gcodePath, "ini");
using (var stream = new StreamWriter(configFilePath))
{
stream.WriteLine($"additionalArgsToProcess = -m \"1,0,0,0,0,1,0,0,0,0,1,0,5,0,0,1\" \"{stlPath}\"");
}
// Slice file
MatterSlice.ProcessArgs($"-v -o \"{gcodePath}\" -c \"{configFilePath}\"");
// Load and validate generated GCode
string[] gcode = TestUtilities.LoadGCodeFile(gcodePath);
var movement = default(MovementInfo);
// check layer 1
var layer1Info = TestUtilities.GetLayer(gcode, 1);
var layer1Polygons = TestUtilities.GetExtrusionPolygonsForLayer(layer1Info, ref movement, false);
Assert.AreEqual(2, layer1Polygons.Where(i => i.Count > 2).Count());
// check layer 2
var layer2Info = TestUtilities.GetLayer(gcode, 2);
var layer2Polygons = TestUtilities.GetExtrusionPolygonsForLayer(layer2Info, ref movement, false);
Assert.AreEqual(2, layer2Polygons.Where(i => i.Count > 2).Count());
}
public void AllInsidesBeforeAnyOutsides()
{
string thinAttachStlFile = TestUtilities.GetStlPath("Thin Attach");
string thinAttachGCodeFile = TestUtilities.GetTempGCodePath("Thin Attach.gcode");
var config = new ConfigSettings();
config.NumberOfPerimeters = 2;
config.InfillPercent = 0;
config.NumberOfTopLayers = 0;
config.FirstLayerExtrusionWidth = .4;
config.NumberOfBottomLayers = 0;
var processor = new FffProcessor(config);
processor.SetTargetFile(thinAttachGCodeFile);
processor.LoadStlFile(thinAttachStlFile);
// slice and save it
processor.DoProcessing();
processor.Dispose();
string[] gcode = TestUtilities.LoadGCodeFile(thinAttachGCodeFile);
// should look like this
// ____________ ____________
// | _______ | | _______ |
// | | | | | | | |
// | | | |___| | | |
// | | | ____ | | |
// | |______| | | |______| |
// |__________| |__________|
var movement = default(MovementInfo);
{
// check layer 1
string[] layer1Info = TestUtilities.GetLayer(gcode, 1);
Polygons layer1Polygons = TestUtilities.GetExtrusionPolygonsForLayer(layer1Info, ref movement);
// make sure there are 5
Assert.IsTrue(layer1Polygons.Count == 3);
// make sure they are in the right order (two inner polygons print first)
Assert.IsTrue(layer1Polygons[0].MinX() > layer1Polygons[1].MinX());
Assert.IsTrue(layer1Polygons[0].MinX() > layer1Polygons[2].MinX());
}
{
// check layer 2
string[] layer2Info = TestUtilities.GetLayer(gcode, 2);
Polygons layer2Polygons = TestUtilities.GetExtrusionPolygonsForLayer(layer2Info, ref movement);
// make sure there are 3
Assert.IsTrue(layer2Polygons.Count == 3);
// make sure they are in the right order (two inner polygons print first)
Assert.IsTrue(layer2Polygons[0].MinX() > layer2Polygons[1].MinX());
Assert.IsTrue(layer2Polygons[0].MinX() > layer2Polygons[2].MinX());
}
}
public void OuterPerimeterFirstCorrect()
{
string box20MmStlFile = TestUtilities.GetStlPath("20mm-box");
string boxGCodeFile = TestUtilities.GetTempGCodePath("20mm-box-perimeter.gcode");
var config = new ConfigSettings();
config.NumberOfPerimeters = 3;
config.OutsidePerimetersFirst = true;
config.InfillPercent = 0;
config.NumberOfTopLayers = 0;
config.NumberOfBottomLayers = 0;
var processor = new FffProcessor(config);
processor.SetTargetFile(boxGCodeFile);
processor.LoadStlFile(box20MmStlFile);
// slice and save it
processor.DoProcessing();
processor.Dispose();
string[] gcode = TestUtilities.LoadGCodeFile(boxGCodeFile);
var outerPerimeterIndex = 1;
var secondPerimeterIndex = 2;
var thirdPerimeterIndex = 0;
var movement = default(MovementInfo);
{
// check layer 1
var layer1Info = TestUtilities.GetLayer(gcode, 1);
var layerPolygons = TestUtilities.GetExtrusionPolygonsForLayer(layer1Info, ref movement);
// make sure there are 3
Assert.IsTrue(layerPolygons.Count == 3);
// perimeters should be in 3 1 2 order so that we have priming happening before the outer perimeter
Assert.IsTrue(layerPolygons[outerPerimeterIndex].MinX() < layerPolygons[secondPerimeterIndex].MinX());
Assert.IsTrue(layerPolygons[outerPerimeterIndex].MinX() < layerPolygons[thirdPerimeterIndex].MinX());
Assert.IsTrue(layerPolygons[secondPerimeterIndex].MinX() < layerPolygons[thirdPerimeterIndex].MinX());
}
{
// check layer 2
var layer2Info = TestUtilities.GetLayer(gcode, 2);
var layerPolygons = TestUtilities.GetExtrusionPolygonsForLayer(layer2Info, ref movement);
// make sure there are 3
Assert.IsTrue(layerPolygons.Count == 3);
// make sure they are in the right order (other layers are inside out)
Assert.IsTrue(layerPolygons[outerPerimeterIndex].MinX() < layerPolygons[secondPerimeterIndex].MinX());
Assert.IsTrue(layerPolygons[outerPerimeterIndex].MinX() < layerPolygons[thirdPerimeterIndex].MinX());
Assert.IsTrue(layerPolygons[secondPerimeterIndex].MinX() < layerPolygons[thirdPerimeterIndex].MinX());
}
}
private static void CheckLayersIncrement(string stlFile, string gcodeFile)
{
string risingLayersStlFile = TestUtilities.GetStlPath(stlFile);
string risingLayersGCodeFileName = TestUtilities.GetTempGCodePath(gcodeFile);
var config = new ConfigSettings();
config.FirstLayerThickness = .2;
config.LayerThickness = .2;
var processor = new FffProcessor(config);
processor.SetTargetFile(risingLayersGCodeFileName);
processor.LoadStlFile(risingLayersStlFile);
// slice and save it
processor.DoProcessing();
processor.Dispose();
string[] risingLayersGCodeContent = TestUtilities.LoadGCodeFile(risingLayersGCodeFileName);
// test .1 layer height
int layerCount = TestUtilities.LayerCount(risingLayersGCodeContent);
Assert.IsTrue(layerCount == 50);
var startingPosition = default(MovementInfo);
for (int layerIndex = 0; layerIndex < layerCount; layerIndex++)
{
string[] layerInfo = TestUtilities.GetLayer(risingLayersGCodeContent, layerIndex);
int movementIndex = 0;
// check that all layers move up
foreach (MovementInfo movement in TestUtilities.GetLayerMovements(layerInfo, startingPosition))
{
if (movement.line.Contains("X") ||
movement.line.Contains("Y") ||
movement.line.Contains("Z"))
{
if (layerIndex > 0)
{
Assert.AreEqual(movement.position.z, .2 + layerIndex * .2, .001);
Assert.IsTrue(movement.position.z >= startingPosition.position.z);
}
}
// always go up
startingPosition.position = new Vector3(0, 0, Math.Max(startingPosition.position.z, movement.position.z));
movementIndex++;
}
}
}
public void InnerPerimeterFirstCorrect()
{
// By default we need to do the inner perimeters first
string box20MmStlFile = TestUtilities.GetStlPath("20mm-box");
string boxGCodeFile = TestUtilities.GetTempGCodePath("20mm-box-perimeter.gcode");
var config = new ConfigSettings();
config.NumberOfPerimeters = 3;
config.InfillPercent = 0;
config.NumberOfTopLayers = 0;
config.NumberOfBottomLayers = 0;
var processor = new FffProcessor(config);
processor.SetTargetFile(boxGCodeFile);
processor.LoadStlFile(box20MmStlFile);
// slice and save it
processor.DoProcessing();
processor.Dispose();
string[] gcode = TestUtilities.LoadGCodeFile(boxGCodeFile);
var movement = default(MovementInfo);
{
// check layer 1
string[] layer1Info = TestUtilities.GetLayer(gcode, 1);
Polygons layer1Polygons = TestUtilities.GetExtrusionPolygonsForLayer(layer1Info, ref movement);
// make sure there are 3
Assert.IsTrue(layer1Polygons.Count == 3);
// make sure they are in the right order (first layer is outside in)
Assert.IsTrue(layer1Polygons[0].MinX() > layer1Polygons[1].MinX());
}
{
// check layer 2
string[] layer2Info = TestUtilities.GetLayer(gcode, 2);
Polygons layer2Polygons = TestUtilities.GetExtrusionPolygonsForLayer(layer2Info, ref movement);
// make sure there are 3
Assert.IsTrue(layer2Polygons.Count == 3);
// make sure they are in the right order (other layers are inside out)
Assert.IsTrue(layer2Polygons[0].MinX() > layer2Polygons[1].MinX());
}
}
private static void CheckSpiralCone(string stlFile, string gcodeFile, bool enableThinWalls = false)
{
string cylinderStlFile = TestUtilities.GetStlPath(stlFile);
string cylinderGCodeFileName = TestUtilities.GetTempGCodePath(gcodeFile);
var config = new ConfigSettings
{
FirstLayerThickness = .2,
LayerThickness = .2,
NumberOfBottomLayers = 0,
ContinuousSpiralOuterPerimeter = true
};
if (enableThinWalls)
{
config.ExpandThinWalls = true;
config.FillThinGaps = true;
}
var processor = new FffProcessor(config);
processor.SetTargetFile(cylinderGCodeFileName);
processor.LoadStlFile(cylinderStlFile);
// slice and save it
processor.DoProcessing();
processor.Dispose();
string[] cylinderGCodeContent = TestUtilities.LoadGCodeFile(cylinderGCodeFileName);
// test .1 layer height
int layerCount = TestUtilities.LayerCount(cylinderGCodeContent);
Assert.AreEqual(50, layerCount, "SpiralCone should have 50 layers");
for (int i = 2; i < layerCount - 3; i++)
{
string[] layerInfo = TestUtilities.GetLayer(cylinderGCodeContent, i);
// check that all layers move up continuously
var lastMovement = default(MovementInfo);
foreach (MovementInfo movement in TestUtilities.GetLayerMovements(layerInfo))
{
#if __ANDROID__
Assert.IsTrue(movement.position.z > lastMovement.position.z);
#else
Assert.Greater(movement.position.z, lastMovement.position.z, "Z position should increment per layer");
#endif
lastMovement = movement;
}
double radiusForLayer = 5.0 + (20.0 - 5.0) / layerCount * i;
bool first = true;
lastMovement = default(MovementInfo);
// check that all moves are on the outside of the cylinder (not crossing to a new point)
foreach (MovementInfo movement in TestUtilities.GetLayerMovements(layerInfo))
{
if (!first)
{
Assert.IsTrue((movement.position - lastMovement.position).Length < 2);
var xyOnly = new Vector3(movement.position.x, movement.position.y, 0);
Assert.AreEqual(radiusForLayer, xyOnly.Length, .3);
}
lastMovement = movement;
first = false;
}
}
}
public void DualMaterialPrintMovesCorrectly(bool createWipeTower)
{
string leftPart = "Box Left";
string rightPart = "Box Right";
string leftStlFile = TestUtilities.GetStlPath(leftPart);
string rightStlFile = TestUtilities.GetStlPath(rightPart);
string outputGCodeFileName = TestUtilities.GetTempGCodePath("DualPartMoves");
var config = new ConfigSettings();
config.ExtruderCount = 2;
config.FirstLayerThickness = .2;
config.LayerThickness = .2;
config.NumberOfBottomLayers = 0;
if (createWipeTower)
{
config.WipeTowerSize = 10;
}
else
{
config.WipeTowerSize = 0;
}
var processor = new FffProcessor(config);
processor.SetTargetFile(outputGCodeFileName);
processor.LoadStlFile(leftStlFile);
processor.LoadStlFile(rightStlFile);
// slice and save it
processor.DoProcessing();
processor.Dispose();
string[] gCodeContent = TestUtilities.LoadGCodeFile(outputGCodeFileName);
// test .1 layer height
int layerCount = TestUtilities.LayerCount(gCodeContent);
Assert.IsTrue(layerCount == 50);
bool hadMoveLessThan85 = false;
var lastMovement = default(MovementInfo);
for (int i = 0; i < layerCount - 3; i++)
{
string[] layerInfo = TestUtilities.GetLayer(gCodeContent, i);
// check that all layers move up continuously
foreach (MovementInfo movement in TestUtilities.GetLayerMovements(layerInfo, lastMovement, onlyG1s: true))
{
if (i > 2)
{
if (createWipeTower)
{
Assert.IsTrue(movement.position.x > 75 && movement.position.y > 10, "Moves don't go to 0");
if (movement.position.x < 85)
{
hadMoveLessThan85 = true;
}
}
else
{
Assert.IsTrue(movement.position.x > 85 && movement.position.y > 10, "Moves don't go to 0");
}
}
lastMovement = movement;
}
}
if (createWipeTower)
{
Assert.IsTrue(hadMoveLessThan85, "found a wipe tower");
}
}
public void DoHas2WallRingsAllTheWayUp(string fileName, int expectedLayerCount, bool checkRadius = false)
{
string stlFile = TestUtilities.GetStlPath(fileName);
string gCodeFile = TestUtilities.GetTempGCodePath(fileName + ".gcode");
var config = new ConfigSettings();
config.InfillPercent = 0;
config.NumberOfPerimeters = 1;
config.FirstLayerExtrusionWidth = .2;
config.LayerThickness = .2;
config.NumberOfBottomLayers = 0;
config.NumberOfTopLayers = 0;
var processor = new FffProcessor(config);
processor.SetTargetFile(gCodeFile);
processor.LoadStlFile(stlFile);
// slice and save it
processor.DoProcessing();
processor.Dispose();
string[] gcodeLines = TestUtilities.LoadGCodeFile(gCodeFile);
int layerCount = TestUtilities.LayerCount(gcodeLines);
Assert.IsTrue(layerCount == expectedLayerCount);
var movement = default(MovementInfo);
for (int i = 0; i < layerCount - 10; i++)
{
string[] layerInfo = TestUtilities.GetLayer(gcodeLines, i);
if (i > 0)
{
Polygons layerPolygons = TestUtilities.GetExtrusionPolygonsForLayer(layerInfo, ref movement);
Assert.IsTrue(layerPolygons.Count == 2);
if (checkRadius)
{
Assert.IsTrue(layerPolygons[0].Count > 10);
Assert.IsTrue(layerPolygons[1].Count > 10);
if (false)
{
foreach (var polygon in layerPolygons)
{
double radiusForPolygon = polygon[0].LengthMm();
foreach (var point in polygon)
{
Assert.AreEqual(radiusForPolygon, point.LengthMm(), 15);
}
}
}
}
}
else
{
TestUtilities.GetExtrusionPolygonsForLayer(layerInfo, ref movement);
}
}
}
public void AllMovesRequiringRetractionDoRetraction(string baseFileName, string settingsIniFile = "")
{
string stlToLoad = TestUtilities.GetStlPath(baseFileName + ".stl");
// check that default is support printed with extruder 0
string gcodeToCreate = TestUtilities.GetTempGCodePath(baseFileName + "_retract_.gcode");
var config = new ConfigSettings();
if (settingsIniFile == "")
{
config.MinimumTravelToCauseRetraction = 2;
config.MinimumExtrusionBeforeRetraction = 0;
config.MergeOverlappingLines = false;
config.FirstLayerExtrusionWidth = .5;
}
else
{
config.ReadSettings(settingsIniFile);
}
// this is what we detect
config.RetractionZHop = 5;
var processor = new FffProcessor(config);
processor.SetTargetFile(gcodeToCreate);
processor.LoadStlFile(stlToLoad);
// slice and save it
processor.DoProcessing();
processor.Dispose();
string[] gcodeContents = TestUtilities.LoadGCodeFile(gcodeToCreate);
int layerCount = TestUtilities.LayerCount(gcodeContents);
bool firstPosition = true;
var lastMovement = default(MovementInfo);
var lastExtrusion = default(MovementInfo);
bool lastMoveIsExtrusion = true;
for (int layerIndex = 0; layerIndex < layerCount; layerIndex++)
{
string[] layerGCode = TestUtilities.GetLayer(gcodeContents, layerIndex);
int movementIndex = 0;
foreach (MovementInfo movement in TestUtilities.GetLayerMovements(layerGCode, lastMovement))
{
if (!firstPosition)
{
bool isTravel = lastMovement.extrusion == movement.extrusion;
if (isTravel)
{
Vector3 lastPosition = lastMovement.position;
lastPosition.z = 0;
Vector3 currenPosition = movement.position;
currenPosition.z = 0;
double xyLength = (lastPosition - currenPosition).Length;
if (xyLength > config.MinimumTravelToCauseRetraction &&
lastMoveIsExtrusion)
{
Assert.GreaterOrEqual(movement.position.z, lastExtrusion.position.z);
}
lastMoveIsExtrusion = false;
}
else
{
lastMoveIsExtrusion = true;
lastExtrusion = movement;
}
lastMoveIsExtrusion = !isTravel;
}
lastMovement = movement;
firstPosition = false;
movementIndex++;
}
}
// make sure we don't switch extruders
Assert.IsFalse(TestUtilities.UsesExtruder(gcodeContents, 1));
Assert.IsFalse(TestUtilities.UsesExtruder(gcodeContents, 2));
}
private static void CheckSpiralCylinder(string stlFile, string gcodeFile, int expectedLayers, bool enableThinWalls = false)
{
string cylinderStlFile = TestUtilities.GetStlPath(stlFile);
string cylinderGCodeFileName = TestUtilities.GetTempGCodePath(gcodeFile);
var config = new ConfigSettings();
config.FirstLayerThickness = .2;
config.LayerThickness = .2;
if (enableThinWalls)
{
config.ExpandThinWalls = true;
config.FillThinGaps = true;
}
config.NumberOfBottomLayers = 0;
config.ContinuousSpiralOuterPerimeter = true;
var processor = new FffProcessor(config);
processor.SetTargetFile(cylinderGCodeFileName);
processor.LoadStlFile(cylinderStlFile);
// slice and save it
processor.DoProcessing();
processor.Dispose();
string[] cylinderGCodeContent = TestUtilities.LoadGCodeFile(cylinderGCodeFileName);
// test .1 layer height
int layerCount = TestUtilities.LayerCount(cylinderGCodeContent);
Assert.IsTrue(layerCount == expectedLayers);
for (int i = 2; i < layerCount - 3; i++)
{
string[] layerInfo = TestUtilities.GetLayer(cylinderGCodeContent, i);
// check that all layers move up continuously
var lastMovement = default(MovementInfo);
foreach (MovementInfo movement in TestUtilities.GetLayerMovements(layerInfo))
{
Assert.IsTrue(movement.position.z > lastMovement.position.z);
lastMovement = movement;
}
bool first = true;
lastMovement = default(MovementInfo);
// check that all moves are on the outside of the cylinder (not crossing to a new point)
foreach (MovementInfo movement in TestUtilities.GetLayerMovements(layerInfo))
{
if (!first)
{
Assert.IsTrue((movement.position - lastMovement.position).Length < 2);
var xyOnly = new Vector3(movement.position.x, movement.position.y, 0);
Assert.AreEqual(9.8, xyOnly.Length, .3);
}
lastMovement = movement;
first = false;
}
}
}
