public void Update(ManagedHand managedHand, Vector3 keyPointLocation, params Vector3[] decayPoints)
{
if (!managedHand.Visible)
{
//lost:
if (Visible)
{
FireLostEvent();
_progress.locationHistory.Clear();
}
return;
}
//visibility status:
bool currentVisibility = true;
//too close to next joint in chain means visibility failed:
if (Vector3.Distance(keyPointLocation, _mainCamera.transform.position) < _minHeadDistance)
{
currentVisibility = false;
}
else
{
for (int i = 0; i < decayPoints.Length; i++)
{
if (Vector3.Distance(keyPointLocation, decayPoints[i]) < _lostKeyPointDistance)
{
currentVisibility = false;
break;
}
}
}
positionRaw = keyPointLocation;
//lost visibility:
if (!currentVisibility && Visible)
{
FireLostEvent();
_progress.locationHistory.Clear();
return;
}
//history cache:
_progress.locationHistory.Add(keyPointLocation);
//only need 3 in our history:
if (_progress.locationHistory.Count > 3)
{
_progress.locationHistory.RemoveAt(0);
}
//we have enough history:
if (_progress.locationHistory.Count == 3)
{
//movement intent stats:
Vector3 vectorA = _progress.locationHistory[_progress.locationHistory.Count - 2] - _progress.locationHistory[_progress.locationHistory.Count - 3];
Vector3 vectorB = _progress.locationHistory[_progress.locationHistory.Count - 1] - _progress.locationHistory[_progress.locationHistory.Count - 2];
float delta = Vector3.Distance(_progress.locationHistory[_progress.locationHistory.Count - 3], _progress.locationHistory[_progress.locationHistory.Count - 1]);
float angle = Vector3.Angle(vectorA, vectorB);
Stability = 1 - Mathf.Clamp01(delta / _maxDistance);
//moving in a constant direction?
if (angle < 90)
{
_progress.target = _progress.locationHistory[_progress.locationHistory.Count - 1];
}
//snap or smooth:
if (Stability == 0)
{
positionFiltered = _progress.target;
}
else
{
positionFiltered = Vector3.SmoothDamp(positionFiltered, _progress.target, ref _progress.velocity, _smoothTime * Stability);
}
}
else
{
positionFiltered = keyPointLocation;
}
//inside the camera plane - flatten against the plane?
InsideClipPlane = TransformUtilities.InsideClipPlane(positionFiltered);
if (InsideClipPlane)
{
positionFiltered = TransformUtilities.LocationOnClipPlane(positionFiltered);
}
//gained visibility:
if (currentVisibility && !Visible)
{
//we must also break distance for point proximity:
for (int i = 0; i < decayPoints.Length; i++)
{
if (Vector3.Distance(keyPointLocation, decayPoints[i]) < _foundKeyPointDistance)
{
currentVisibility = false;
break;
}
}
//still good?
if (currentVisibility)
{
FireFoundEvent();
}
}
}
//Public Methods:
public void Update()
{
//update keypoints and fingers:
WristCenter.Update(_managedHand, _managedHand.Hand.Wrist.Center.Position, _managedHand.Hand.Center);
HandCenter.Update(_managedHand, _managedHand.Hand.Center);
_thumbMCP.Update(_managedHand, _managedHand.Hand.Thumb.MCP.Position, _managedHand.Hand.Index.MCP.Position, _managedHand.Hand.Center);
_thumbPIP.Update(_managedHand, _managedHand.Hand.Thumb.IP.Position, _managedHand.Hand.Thumb.MCP.Position, _managedHand.Hand.Center);
_thumbTip.Update(_managedHand, _managedHand.Hand.Thumb.Tip.Position, _managedHand.Hand.Thumb.IP.Position, _managedHand.Hand.Middle.Tip.Position, _managedHand.Hand.Thumb.MCP.Position, _managedHand.Hand.Center);
Thumb.Update();
_indexMCP.Update(_managedHand, _managedHand.Hand.Index.MCP.Position, _managedHand.Hand.Center);
_indexPIP.Update(_managedHand, _managedHand.Hand.Index.PIP.Position, _managedHand.Hand.Index.MCP.Position, _managedHand.Hand.Center);
_indexTip.Update(_managedHand, _managedHand.Hand.Index.Tip.Position, _managedHand.Hand.Index.PIP.Position, _managedHand.Hand.Index.MCP.Position, _managedHand.Hand.Center, _managedHand.Hand.Thumb.IP.Position, _managedHand.Hand.Middle.Tip.Position);
Index.Update();
_middleMCP.Update(_managedHand, _managedHand.Hand.Middle.MCP.Position, _managedHand.Hand.Center);
_middlePIP.Update(_managedHand, _managedHand.Hand.Middle.PIP.Position, _managedHand.Hand.Middle.MCP.Position, _managedHand.Hand.Center);
_middleTip.Update(_managedHand, _managedHand.Hand.Middle.Tip.Position, _managedHand.Hand.Middle.PIP.Position, _managedHand.Hand.Middle.MCP.Position, _managedHand.Hand.Ring.Tip.Position, _managedHand.Hand.Center);
Middle.Update();
_ringMCP.Update(_managedHand, _managedHand.Hand.Ring.MCP.Position, _managedHand.Hand.Center);
_ringTip.Update(_managedHand, _managedHand.Hand.Ring.Tip.Position, _managedHand.Hand.Ring.MCP.Position, _managedHand.Hand.Pinky.Tip.Position, _managedHand.Hand.Middle.Tip.Position, _managedHand.Hand.Center);
Ring.Update();
_pinkyMCP.Update(_managedHand, _managedHand.Hand.Pinky.MCP.Position, _managedHand.Hand.Center);
_pinkyTip.Update(_managedHand, _managedHand.Hand.Pinky.Tip.Position, _managedHand.Hand.Pinky.MCP.Position, _managedHand.Hand.Ring.Tip.Position, _managedHand.Hand.Center);
Pinky.Update();
//we need a hand to continue:
if (!_managedHand.Visible)
{
return;
}
//correct distances:
float thumbMcpToWristDistance = Vector3.Distance(_thumbMCP.positionFiltered, WristCenter.positionFiltered) * .5f;
//fix the distance between the wrist and thumbMcp as it incorrectly expands as the hand gets further from the camera:
float distancePercentage = Mathf.Clamp01(Vector3.Distance(_mainCamera.transform.position, WristCenter.positionFiltered) / .5f);
distancePercentage = 1 - Percentage(distancePercentage, .90f, 1) * .4f;
thumbMcpToWristDistance *= distancePercentage;
Vector3 wristToPalmDirection = Vector3.Normalize(Vector3.Normalize(HandCenter.positionFiltered - WristCenter.positionFiltered));
Vector3 center = WristCenter.positionFiltered + (wristToPalmDirection * thumbMcpToWristDistance);
Vector3 camToWristDirection = Vector3.Normalize(WristCenter.positionFiltered - _mainCamera.transform.position);
//rays needed for planarity discovery for in/out palm facing direction:
Vector3 camToWrist = new Ray(WristCenter.positionFiltered, camToWristDirection).GetPoint(1);
Vector3 camToThumbMcp = new Ray(_thumbMCP.positionFiltered, Vector3.Normalize(_thumbMCP.positionFiltered - _mainCamera.transform.position)).GetPoint(1);
Vector3 camToPalm = new Ray(center, Vector3.Normalize(center - _mainCamera.transform.position)).GetPoint(1);
//discover palm facing direction to camera:
Plane palmFacingPlane = new Plane(camToWrist, camToPalm, camToThumbMcp);
if (_managedHand.Hand.HandType == MLHandType.Left)
{
palmFacingPlane.Flip();
}
float palmForwardFacing = Mathf.Sign(Vector3.Dot(palmFacingPlane.normal, _mainCamera.transform.forward));
//use thumb/palm/wrist alignment to determine amount of roll in the hand:
Vector3 toThumbMcp = Vector3.Normalize(_thumbMCP.positionFiltered - center);
Vector3 toPalm = Vector3.Normalize(center - WristCenter.positionFiltered);
float handRollAmount = (1 - Vector3.Dot(toThumbMcp, toPalm)) * palmForwardFacing;
//where between the wrist and thumbMcp should we slide inwards to get the palm in the center:
Vector3 toPalmOrigin = Vector3.Lerp(WristCenter.positionFiltered, _thumbMCP.positionFiltered, .35f);
//get a direction from the camera to toPalmOrigin as psuedo up for use in quaternion construction:
Vector3 toCam = Vector3.Normalize(_mainCamera.transform.position - toPalmOrigin);
//construct a quaternion that helps get angles needed between the wrist and thumbMCP to point towards the palm center:
Vector3 wristToThumbMcp = Vector3.Normalize(_thumbMCP.positionFiltered - WristCenter.positionFiltered);
Quaternion towardsCamUpReference = Quaternion.identity;
if (wristToThumbMcp != Vector3.zero && toCam != Vector3.zero)
{
towardsCamUpReference = Quaternion.LookRotation(wristToThumbMcp, toCam);
}
//rotate the inwards vector depending on hand roll to know where to push the palm back:
float inwardsVectorRotation = 90;
if (_managedHand.Hand.HandType == MLHandType.Left)
{
inwardsVectorRotation = -90;
}
towardsCamUpReference = Quaternion.AngleAxis(handRollAmount * inwardsVectorRotation, towardsCamUpReference * Vector3.forward) * towardsCamUpReference;
Vector3 inwardsVector = towardsCamUpReference * Vector3.up;
//slide palm location along inwards vector to get it into proper physical location in the center of the hand:
center = toPalmOrigin - inwardsVector * thumbMcpToWristDistance;
Vector3 deadCenter = center;
//as the hand flattens back out balance corrected location with originally provided location for better forward origin:
center = Vector3.Lerp(center, HandCenter.positionFiltered, Mathf.Abs(handRollAmount));
//get a forward using the corrected palm location:
Vector3 forward = Vector3.Normalize(center - WristCenter.positionFiltered);
//switch back to physical center of hand - this reduces surface-to-surface movement of the center between back and palm:
center = deadCenter;
//get an initial hand up:
Plane handPlane = new Plane(WristCenter.positionFiltered, _thumbMCP.positionFiltered, center);
if (_managedHand.Hand.HandType == MLHandType.Left)
{
handPlane.Flip();
}
Vector3 up = handPlane.normal;
//find out how much the back of the hand is facing the camera so we have a safe set of features for a stronger forward:
Vector3 centerToCam = Vector3.Normalize(_mainCamera.transform.position - WristCenter.positionFiltered);
float facingDot = Vector3.Dot(centerToCam, up);
if (facingDot > .5f)
{
float handBackFacingCamAmount = Percentage(facingDot, .5f, 1);
//steer forward for more accuracy based on the visibility of the back of the hand:
if (_middleMCP.Visible)
{
Vector3 toMiddleMcp = Vector3.Normalize(_middleMCP.positionFiltered - center);
forward = Vector3.Lerp(forward, toMiddleMcp, handBackFacingCamAmount);
}
else if (_indexMCP.Visible)
{
Vector3 inIndexMcp = Vector3.Normalize(_indexMCP.positionFiltered - center);
forward = Vector3.Lerp(forward, inIndexMcp, handBackFacingCamAmount);
}
}
//make sure palm distance from wrist is consistant while also leveraging steered forward:
center = WristCenter.positionFiltered + (forward * thumbMcpToWristDistance);
//an initial rotation of the hand:
Quaternion orientation = Quaternion.identity;
if (forward != Vector3.zero && up != Vector3.zero)
{
orientation = Quaternion.LookRotation(forward, up);
}
//as the hand rolls counter-clockwise the thumbMcp loses accuracy so we need to interpolate to the back of the hand's features:
if (_indexMCP.Visible && _middleMCP.Visible)
{
Vector3 knucklesVector = Vector3.Normalize(_middleMCP.positionFiltered - _indexMCP.positionFiltered);
float knucklesDot = Vector3.Dot(knucklesVector, Vector3.up);
if (knucklesDot > .5f)
{
float counterClockwiseRoll = Percentage(Vector3.Dot(knucklesVector, Vector3.up), .35f, .7f);
center = Vector3.Lerp(center, HandCenter.positionFiltered, counterClockwiseRoll);
forward = Vector3.Lerp(forward, Vector3.Normalize(_middleMCP.positionFiltered - HandCenter.positionFiltered), counterClockwiseRoll);
Plane backHandPlane = new Plane(HandCenter.positionFiltered, _indexMCP.positionFiltered, _middleMCP.positionFiltered);
if (_managedHand.Hand.HandType == MLHandType.Left)
{
backHandPlane.Flip();
}
up = Vector3.Lerp(up, backHandPlane.normal, counterClockwiseRoll);
orientation = Quaternion.LookRotation(forward, up);
}
}
//as the wrist tilts away from the camera (with the thumb down) at extreme angles the hand center will move toward the thumb:
float handTiltAwayAmount = 1 - Percentage(Vector3.Distance(HandCenter.positionFiltered, WristCenter.positionFiltered), .025f, .04f);
Vector3 handTiltAwayCorrectionPoint = WristCenter.positionFiltered + camToWristDirection * thumbMcpToWristDistance;
center = Vector3.Lerp(center, handTiltAwayCorrectionPoint, handTiltAwayAmount);
forward = Vector3.Lerp(forward, Vector3.Normalize(handTiltAwayCorrectionPoint - WristCenter.positionFiltered), handTiltAwayAmount);
Plane wristPlane = new Plane(WristCenter.positionFiltered, _thumbMCP.positionFiltered, center);
if (_managedHand.Hand.HandType == MLHandType.Left)
{
wristPlane.Flip();
}
up = Vector3.Lerp(up, wristPlane.normal, handTiltAwayAmount);
if (forward != Vector3.zero && up != Vector3.zero)
{
orientation = Quaternion.LookRotation(forward, up);
}
//steering for if thumb/index are not available from self-occlusion to help rotate the hand better outwards better:
float forwardUpAmount = Vector3.Dot(forward, Vector3.up);
if (forwardUpAmount > .7f && _indexMCP.Visible && _ringMCP.Visible)
{
float angle = 0;
if (_managedHand.Hand.HandType == MLHandType.Right)
{
Vector3 knucklesVector = Vector3.Normalize(_ringMCP.positionFiltered - _indexMCP.positionFiltered);
angle = Vector3.Angle(knucklesVector, orientation * Vector3.right);
angle *= -1;
}
else
{
Vector3 knucklesVector = Vector3.Normalize(_indexMCP.positionFiltered - _ringMCP.positionFiltered);
angle = Vector3.Angle(knucklesVector, orientation * Vector3.right);
}
Quaternion selfOcclusionSteering = Quaternion.AngleAxis(angle, forward);
orientation = selfOcclusionSteering * orientation;
}
else
{
//when palm is facing down we need to rotate some to compensate for an offset:
float rollCorrection = Mathf.Clamp01(Vector3.Dot(orientation * Vector3.up, Vector3.up));
float rollCorrectionAmount = -30;
if (_managedHand.Hand.HandType == MLHandType.Left)
{
rollCorrectionAmount = 30;
}
orientation = Quaternion.AngleAxis(rollCorrectionAmount * rollCorrection, forward) * orientation;
}
//inside the camera plane:
InsideClipPlane = TransformUtilities.InsideClipPlane(center);
//set pose:
Position = center;
Rotation = orientation;
}