private G.Line trimLine_basepoint(G.Line extendedLine, G.Point fixedPoint) // this function is used by B vs C handler and does not know what edge it belongs to. Hence the 0.01 tambov
{
G.Line trimmedLine = extendedLine.Copy();
foreach (G.Edge eg in allEdges)
{
double o = _V_.X_CONCRETE_COVER_1 - _V_.X_TRIM_MINIMUM_DELTA;
G.Line offsetLine = eg.edgeOffset(o, o, o);
if (G.Line.hasIntersection(trimmedLine, offsetLine))
{
G.Point ip = G.Line.getIntersectionPoint(trimmedLine, offsetLine);
if (fixedPoint == extendedLine.End)
{
trimmedLine = new G.Line(ip, extendedLine.End);
}
else
{
trimmedLine = new G.Line(extendedLine.Start, ip);
}
}
}
return(trimmedLine);
}
private bool trimmer_basepoint(G.Line extendedLine, G.Point fixedPoint, ref G.Edge trimmer)
{
bool trimmed = false;
G.Line trimmedLine = extendedLine.Copy();
foreach (G.Edge eg in allEdges)
{
G.Line offsetLine = eg.edgeOffset(0, 0, 0);
if (G.Line.hasIntersection(trimmedLine, offsetLine))
{
G.Line interLine = eg.edgeOffset(0, 0, 0);
G.Point ip = G.Line.getIntersectionPoint(trimmedLine, interLine);
if (fixedPoint == extendedLine.End)
{
trimmedLine = new G.Line(ip, extendedLine.End);
}
else
{
trimmedLine = new G.Line(extendedLine.Start, ip);
}
trimmed = true;
trimmer = eg;
}
}
return(trimmed);
}
//B HANDLE
private bool B_vs_C_handler(G.Point mainPoint, G.Point mainEnd, G.Point sideStart, G.Edge e, G.Corner oc)
{
G.Line main = new G.Line(mainPoint, mainEnd);
G.Line side = new G.Line(sideStart, mainPoint);
G.Line temp1 = trimLine_basepoint(main, mainPoint);
if (temp1.Length() > main.Length() * _V_.M_TRIM_TOLERANCE)
{
main = temp1.Copy();
}
if (denier(main))
{
return(false);
}
G.Line temp2 = trimLine_basepoint(side, mainPoint);
if (temp2.Length() > side.Length() * _V_.M_TRIM_TOLERANCE)
{
side = temp2.Copy();
}
if (denier(side))
{
return(false);
}
if (main.Length() < _V_.Y_REINFORCEMENT_MAIN_RADIUS)
{
return(false);
}
if (side.Length() < _V_.Y_REINFORCEMENT_MAIN_RADIUS)
{
return(false);
}
G.Vector v1 = main.getDirectionVector();
G.Vector v2 = side.getDirectionVector();
double ang = G.Converter.AngleDeltaCW(v1, v2);
if (Math.Abs(ang - Math.PI / 2) < _V_.M_B_BAR_TOLERANCE)
{
R.B_Raud reinf = new R.B_Raud(main, side, _V_.X_REINFORCEMENT_NUMBER, _V_.X_REINFORCEMENT_MAIN_DIAMETER, _V_.X_REINFORCEMENT_MARK);
keep(reinf, e, oc, null);
}
else
{
R.C_Raud reinf = new R.C_Raud(main, side, _V_.X_REINFORCEMENT_NUMBER, _V_.X_REINFORCEMENT_MAIN_DIAMETER, _V_.X_REINFORCEMENT_MARK);
keep(reinf, e, oc, null);
}
return(true);
}
private G.Line trimLine_basepoint(G.Line extendedLine, G.Point fixedPoint, double offset, G.Edge e, ref G.Edge trimmer)
{
G.Line trimmedLine = extendedLine.Copy();
foreach (G.Edge eg in allEdges)
{
if (eg.Line.getOffsetVector() == e.Line.getOffsetVector())
{
continue;
}
if (e.StartCorner.getOtherEdge(e) == eg && e.StartCorner.Angle > Math.PI)
{
continue;
}
if (e.EndCorner.getOtherEdge(e) == eg && e.EndCorner.Angle > Math.PI)
{
continue;
}
if (trimmedLine.getDirectionVector() == eg.Line.getDirectionVector())
{
continue;
}
if (trimmedLine.getDirectionVector() == (-1) * eg.Line.getDirectionVector())
{
continue;
}
double o = offset - _V_.X_TRIM_MINIMUM_DELTA;
double so = _V_.X_CONCRETE_COVER_1 - _V_.X_TRIM_SIDE_MINIMUM_DELTA;
if (e.StartCorner.getOtherEdge(e) == eg)
{
o = so;
}
if (e.EndCorner.getOtherEdge(e) == eg)
{
o = so;
}
G.Line offsetLine = eg.edgeTrimmer(o, so, so);
if (G.Line.hasIntersection(trimmedLine, offsetLine))
{
G.Point ip = G.Line.getIntersectionPoint(trimmedLine, offsetLine);
if (ip == fixedPoint)
{
continue;
}
if (fixedPoint == extendedLine.End)
{
trimmedLine = new G.Line(ip, extendedLine.End);
}
else
{
trimmedLine = new G.Line(extendedLine.Start, ip);
}
trimmer = eg;
}
}
return(trimmedLine);
}
private void create_trimmed_short_A()
{
List <G.Edge> emptyEdges = allEdges.Where(x => !setEdges.Keys.Contains(x)).ToList();
emptyEdges = emptyEdges.OrderBy(b => b.Line.Length()).ToList();
foreach (G.Edge e in emptyEdges)
{
if (setEdges.Keys.Contains(e))
{
continue;
}
if (narrow_denier(e))
{
continue;
}
G.Edge temp = null;
G.Line main = e.edgeOffset(_V_.X_CONCRETE_COVER_1, _V_.X_CONCRETE_COVER_1, _V_.X_CONCRETE_COVER_1);
main = trimLine_baseline(main, main.Copy(), _V_.X_CONCRETE_COVER_2, e, ref temp);
bool startTrimmed = false;
G.Edge startTrimmerEdge = null;
if (e.StartCorner.Angle > Math.PI)
{
G.Line extended = main.extendStart(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH);
G.Line trimmed = trimLine_basepoint(extended, main.End, _V_.X_CONCRETE_COVER_2, e, ref startTrimmerEdge);
if (trimmed.Length() < main.Length() + _V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * _V_.M_TRIM_TOLERANCE)
{
startTrimmed = true;
}
main = trimmed;
}
bool endTrimmed = false;
G.Edge endTrimmerEdge = null;
if (e.EndCorner.Angle > Math.PI)
{
G.Line extended = main.extendEnd(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH);
G.Line trimmed = trimLine_basepoint(extended, main.Start, _V_.X_CONCRETE_COVER_2, e, ref endTrimmerEdge);
if (trimmed.Length() < main.Length() + _V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * _V_.M_TRIM_TOLERANCE)
{
endTrimmed = true;
}
main = trimmed;
}
if (main.Length() <= _V_.Y_REINFORCEMENT_MAIN_MIN_LENGTH)
{
if (startTrimmed && endTrimmed)
{
bool got_D = define_D(e, startTrimmerEdge, endTrimmerEdge);
if (got_D == false)
{
G.Vector v1 = main.getOffsetVector();
G.Vector v2 = startTrimmerEdge.Line.getCoolVector(v1);
G.Vector v3 = endTrimmerEdge.Line.getCoolVector(v1);
G.Point side1Point = main.Start.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 1.05, v2);
G.Point side2Point = main.End.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 1.05, v3);
G.Line side1 = new G.Line(side1Point, main.Start);
G.Line side2 = new G.Line(main.End, side2Point);
if (denier(side1) && denier(side2))
{
G.Point AP = main.Start.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 1.5, v2);
G.Line b_line = new G.Line(main.Start, AP);
G.Edge side1TrimmerEdge = null;
G.Line side1Main = trimLine_basepoint(b_line, main.Start, _V_.X_CONCRETE_COVER_2, e, ref side1TrimmerEdge);
G.Point AP2 = main.End.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 1.5, v3);
G.Line b_line2 = new G.Line(main.End, AP2);
G.Edge side2TrimmerEdge = null;
G.Line side2Main = trimLine_basepoint(b_line2, main.End, _V_.X_CONCRETE_COVER_2, e, ref side2TrimmerEdge);
A_handler(main.Start, main.End, e, null, _V_.X_REINFORCEMENT_MAIN_DIAMETER);
define_D(startTrimmerEdge, side1TrimmerEdge, e);
define_D(endTrimmerEdge, e, side2TrimmerEdge);
}
else if (denier(side1))
{
G.Point AP = main.Start.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 1.5, v2);
G.Line b_line = new G.Line(main.Start, AP);
G.Edge sideTrimmerEdge = null;
G.Line newMain = trimLine_basepoint(b_line, main.Start, _V_.X_CONCRETE_COVER_2, e, ref sideTrimmerEdge);
B_vs_C_handler(main.End, side2Point, main.Start, e, null);
define_D(startTrimmerEdge, sideTrimmerEdge, e);
}
else if (denier(side2))
{
G.Point AP = main.End.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 1.5, v2);
G.Line b_line = new G.Line(main.End, AP);
G.Edge sideTrimmerEdge = null;
G.Line newMain = trimLine_basepoint(b_line, main.End, _V_.X_CONCRETE_COVER_2, e, ref sideTrimmerEdge);
define_D(endTrimmerEdge, e, sideTrimmerEdge);
B_vs_C_handler(main.Start, main.End, side1Point, e, null);
}
}
}
else if (startTrimmed)
{
bool got_B = define_B(e, startTrimmerEdge);
if (got_B == false)
{
G.Vector v1 = e.Line.getOffsetVector();
G.Vector v2 = startTrimmerEdge.Line.getCoolVector(v1);
G.Point AP = main.Start.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 2, v2);
G.Line b_line = new G.Line(main.Start, AP);
G.Edge sideTrimmerEdge = null;
G.Line newMain = trimLine_basepoint(b_line, main.Start, _V_.X_CONCRETE_COVER_2, e, ref sideTrimmerEdge);
if (sideTrimmerEdge != null)
{
bool got_D = define_D(startTrimmerEdge, sideTrimmerEdge, e);
if (got_D)
{
A_handler(main.Start, main.End, e, null, _V_.X_REINFORCEMENT_MAIN_DIAMETER);
}
}
else
{
G.Corner ec = e.EndCorner;
if (ec.Angle < Math.PI)
{
G.Edge otherEdge = ec.getOtherEdge(e);
define_D(e, startTrimmerEdge, otherEdge);
}
}
}
}
else if (endTrimmed)
{
bool got_B = define_B(endTrimmerEdge, e);
if (got_B == false)
{
G.Vector v1 = e.Line.getOffsetVector();
G.Vector v2 = endTrimmerEdge.Line.getCoolVector(v1);
G.Point AP = main.End.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 2, v2);
G.Line b_line = new G.Line(main.End, AP);
G.Edge sideTrimmerEdge = null;
G.Line newMain = trimLine_basepoint(b_line, main.End, _V_.X_CONCRETE_COVER_2, e, ref sideTrimmerEdge);
if (sideTrimmerEdge != null)
{
bool got_D = define_D(endTrimmerEdge, e, sideTrimmerEdge);
if (got_D)
{
A_handler(main.Start, main.End, e, null, _V_.X_REINFORCEMENT_MAIN_DIAMETER);
}
}
else
{
G.Corner sc = e.StartCorner;
if (sc.Angle < Math.PI)
{
G.Edge otherEdge = sc.getOtherEdge(e);
define_D(e, otherEdge, endTrimmerEdge);
}
}
}
}
}
}
}
private void create_trimmed_long_A()
{
List <G.Edge> emptyEdges = allEdges.Where(x => !setEdges.Keys.Contains(x)).ToList();
emptyEdges = emptyEdges.OrderBy(b => b.Line.Length()).Reverse().ToList();
foreach (G.Edge e in emptyEdges)
{
if (setEdges.Keys.Contains(e))
{
continue;
}
if (narrow_denier(e))
{
continue;
}
G.Edge temp = null;
G.Line main = e.edgeOffset(_V_.X_CONCRETE_COVER_1, _V_.X_CONCRETE_COVER_1, _V_.X_CONCRETE_COVER_1);
main = trimLine_baseline(main, main.Copy(), _V_.X_CONCRETE_COVER_1, e, ref temp);
bool startTrimmed = false;
G.Edge startTrimmerEdge = null;
if (e.StartCorner.Angle > Math.PI)
{
G.Line extended = main.extendStart(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH);
G.Line trimmed = trimLine_basepoint(extended, main.End, _V_.X_CONCRETE_COVER_2, e, ref startTrimmerEdge);
if (trimmed.Length() < main.Length() + _V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * _V_.M_TRIM_TOLERANCE)
{
startTrimmed = true;
}
main = trimmed;
}
bool endTrimmed = false;
G.Edge endTrimmerEdge = null;
if (e.EndCorner.Angle > Math.PI)
{
G.Line extended = main.extendEnd(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH);
G.Line trimmed = trimLine_basepoint(extended, main.Start, _V_.X_CONCRETE_COVER_2, e, ref endTrimmerEdge);
if (trimmed.Length() < main.Length() + _V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * _V_.M_TRIM_TOLERANCE)
{
endTrimmed = true;
}
main = trimmed;
}
if (main.Length() > _V_.Y_REINFORCEMENT_MAIN_MIN_LENGTH)
{
A_handler(main.Start, main.End, e, null, _V_.X_REINFORCEMENT_MAIN_DIAMETER);
if (startTrimmed)
{
bool got_B = define_simple_B(e, startTrimmerEdge);
if (got_B == false)
{
G.Vector v1 = e.Line.getOffsetVector();
G.Vector v2 = startTrimmerEdge.Line.getCoolVector(v1);
G.Point AP = main.Start.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 1.5, v2);
G.Line b_line = new G.Line(main.Start, AP);
G.Edge sideTrimmerEdge = null;
G.Line newMain = trimLine_basepoint(b_line, main.Start, _V_.X_CONCRETE_COVER_2, e, ref sideTrimmerEdge);
if (sideTrimmerEdge != null)
{
define_D(startTrimmerEdge, sideTrimmerEdge, e);
}
}
}
if (endTrimmed)
{
bool got_B = define_simple_B(endTrimmerEdge, e);
if (got_B == false)
{
G.Vector v1 = e.Line.getOffsetVector();
G.Vector v2 = endTrimmerEdge.Line.getCoolVector(v1);
G.Point AP = main.End.move(_V_.X_REINFORCEMENT_MAIN_ANCHOR_LENGTH * 1.5, v2);
G.Line b_line = new G.Line(main.End, AP);
G.Edge sideTrimmerEdge = null;
G.Line newMain = trimLine_basepoint(b_line, main.End, _V_.X_CONCRETE_COVER_2, e, ref sideTrimmerEdge);
if (sideTrimmerEdge != null)
{
define_D(endTrimmerEdge, e, sideTrimmerEdge);
}
}
}
}
}
}
